|
|
|
// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
|
|
|
|
// This source code is licensed under both the GPLv2 (found in the
|
|
|
|
// COPYING file in the root directory) and Apache 2.0 License
|
|
|
|
// (found in the LICENSE.Apache file in the root directory).
|
|
|
|
//
|
|
|
|
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
|
|
|
|
// Use of this source code is governed by a BSD-style license that can be
|
|
|
|
// found in the LICENSE file. See the AUTHORS file for names of contributors.
|
|
|
|
|
|
|
|
#include "test_util/testutil.h"
|
|
|
|
|
|
|
|
#include <fcntl.h>
|
|
|
|
#include <sys/stat.h>
|
|
|
|
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
#include <array>
|
Add OptionsUtil::LoadOptionsFromFile() API
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
9 years ago
|
|
|
#include <cctype>
|
|
|
|
#include <fstream>
|
Add OptionsUtil::LoadOptionsFromFile() API
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
9 years ago
|
|
|
#include <sstream>
|
|
|
|
|
|
|
|
#include "db/memtable_list.h"
|
Introduce a new storage specific Env API (#5761)
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
5 years ago
|
|
|
#include "env/composite_env_wrapper.h"
|
|
|
|
#include "file/random_access_file_reader.h"
|
|
|
|
#include "file/sequence_file_reader.h"
|
|
|
|
#include "file/writable_file_writer.h"
|
|
|
|
#include "port/port.h"
|
|
|
|
#include "rocksdb/convenience.h"
|
|
|
|
#include "rocksdb/system_clock.h"
|
|
|
|
#include "rocksdb/utilities/object_registry.h"
|
|
|
|
#include "test_util/mock_time_env.h"
|
|
|
|
#include "test_util/sync_point.h"
|
|
|
|
#include "util/random.h"
|
|
|
|
|
|
|
|
#ifndef ROCKSDB_UNITTESTS_WITH_CUSTOM_OBJECTS_FROM_STATIC_LIBS
|
|
|
|
void RegisterCustomObjects(int /*argc*/, char** /*argv*/) {}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
namespace ROCKSDB_NAMESPACE {
|
|
|
|
namespace test {
|
|
|
|
|
|
|
|
const uint32_t kDefaultFormatVersion = BlockBasedTableOptions().format_version;
|
|
|
|
const std::set<uint32_t> kFooterFormatVersionsToTest{
|
|
|
|
5U,
|
|
|
|
// In case any interesting future changes
|
|
|
|
kDefaultFormatVersion,
|
|
|
|
kLatestFormatVersion,
|
|
|
|
};
|
|
|
|
|
|
|
|
std::string RandomKey(Random* rnd, int len, RandomKeyType type) {
|
|
|
|
// Make sure to generate a wide variety of characters so we
|
|
|
|
// test the boundary conditions for short-key optimizations.
|
|
|
|
static const char kTestChars[] = {'\0', '\1', 'a', 'b', 'c',
|
|
|
|
'd', 'e', '\xfd', '\xfe', '\xff'};
|
|
|
|
std::string result;
|
|
|
|
for (int i = 0; i < len; i++) {
|
|
|
|
std::size_t indx = 0;
|
|
|
|
switch (type) {
|
|
|
|
case RandomKeyType::RANDOM:
|
|
|
|
indx = rnd->Uniform(sizeof(kTestChars));
|
|
|
|
break;
|
|
|
|
case RandomKeyType::LARGEST:
|
|
|
|
indx = sizeof(kTestChars) - 1;
|
|
|
|
break;
|
|
|
|
case RandomKeyType::MIDDLE:
|
|
|
|
indx = sizeof(kTestChars) / 2;
|
|
|
|
break;
|
|
|
|
case RandomKeyType::SMALLEST:
|
|
|
|
indx = 0;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
result += kTestChars[indx];
|
|
|
|
}
|
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
|
|
|
extern Slice CompressibleString(Random* rnd, double compressed_fraction,
|
|
|
|
int len, std::string* dst) {
|
|
|
|
int raw = static_cast<int>(len * compressed_fraction);
|
|
|
|
if (raw < 1) raw = 1;
|
|
|
|
std::string raw_data = rnd->RandomString(raw);
|
|
|
|
|
|
|
|
// Duplicate the random data until we have filled "len" bytes
|
|
|
|
dst->clear();
|
|
|
|
while (dst->size() < (unsigned int)len) {
|
|
|
|
dst->append(raw_data);
|
|
|
|
}
|
|
|
|
dst->resize(len);
|
|
|
|
return Slice(*dst);
|
|
|
|
}
|
|
|
|
|
|
|
|
namespace {
|
|
|
|
class Uint64ComparatorImpl : public Comparator {
|
|
|
|
public:
|
|
|
|
Uint64ComparatorImpl() {}
|
|
|
|
|
|
|
|
const char* Name() const override { return "rocksdb.Uint64Comparator"; }
|
|
|
|
|
|
|
|
int Compare(const Slice& a, const Slice& b) const override {
|
|
|
|
assert(a.size() == sizeof(uint64_t) && b.size() == sizeof(uint64_t));
|
|
|
|
const uint64_t* left = reinterpret_cast<const uint64_t*>(a.data());
|
|
|
|
const uint64_t* right = reinterpret_cast<const uint64_t*>(b.data());
|
|
|
|
uint64_t leftValue;
|
|
|
|
uint64_t rightValue;
|
|
|
|
GetUnaligned(left, &leftValue);
|
|
|
|
GetUnaligned(right, &rightValue);
|
|
|
|
if (leftValue == rightValue) {
|
|
|
|
return 0;
|
|
|
|
} else if (leftValue < rightValue) {
|
|
|
|
return -1;
|
|
|
|
} else {
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void FindShortestSeparator(std::string* /*start*/,
|
|
|
|
const Slice& /*limit*/) const override {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
void FindShortSuccessor(std::string* /*key*/) const override { return; }
|
|
|
|
};
|
|
|
|
|
|
|
|
// A test implementation of comparator with 64-bit integer timestamp.
|
|
|
|
class ComparatorWithU64TsImpl : public Comparator {
|
|
|
|
public:
|
|
|
|
ComparatorWithU64TsImpl()
|
|
|
|
: Comparator(/*ts_sz=*/sizeof(uint64_t)),
|
|
|
|
cmp_without_ts_(BytewiseComparator()) {
|
|
|
|
assert(cmp_without_ts_);
|
|
|
|
assert(cmp_without_ts_->timestamp_size() == 0);
|
|
|
|
}
|
|
|
|
const char* Name() const override { return "ComparatorWithU64Ts"; }
|
|
|
|
void FindShortSuccessor(std::string*) const override {}
|
|
|
|
void FindShortestSeparator(std::string*, const Slice&) const override {}
|
|
|
|
int Compare(const Slice& a, const Slice& b) const override {
|
|
|
|
int ret = CompareWithoutTimestamp(a, b);
|
|
|
|
size_t ts_sz = timestamp_size();
|
|
|
|
if (ret != 0) {
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
// Compare timestamp.
|
|
|
|
// For the same user key with different timestamps, larger (newer) timestamp
|
|
|
|
// comes first.
|
|
|
|
return -CompareTimestamp(ExtractTimestampFromUserKey(a, ts_sz),
|
|
|
|
ExtractTimestampFromUserKey(b, ts_sz));
|
|
|
|
}
|
|
|
|
using Comparator::CompareWithoutTimestamp;
|
|
|
|
int CompareWithoutTimestamp(const Slice& a, bool a_has_ts, const Slice& b,
|
|
|
|
bool b_has_ts) const override {
|
|
|
|
const size_t ts_sz = timestamp_size();
|
|
|
|
assert(!a_has_ts || a.size() >= ts_sz);
|
|
|
|
assert(!b_has_ts || b.size() >= ts_sz);
|
|
|
|
Slice lhs = a_has_ts ? StripTimestampFromUserKey(a, ts_sz) : a;
|
|
|
|
Slice rhs = b_has_ts ? StripTimestampFromUserKey(b, ts_sz) : b;
|
|
|
|
return cmp_without_ts_->Compare(lhs, rhs);
|
|
|
|
}
|
|
|
|
int CompareTimestamp(const Slice& ts1, const Slice& ts2) const override {
|
|
|
|
assert(ts1.size() == sizeof(uint64_t));
|
|
|
|
assert(ts2.size() == sizeof(uint64_t));
|
|
|
|
uint64_t lhs = DecodeFixed64(ts1.data());
|
|
|
|
uint64_t rhs = DecodeFixed64(ts2.data());
|
|
|
|
if (lhs < rhs) {
|
|
|
|
return -1;
|
|
|
|
} else if (lhs > rhs) {
|
|
|
|
return 1;
|
|
|
|
} else {
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
private:
|
|
|
|
const Comparator* cmp_without_ts_{nullptr};
|
|
|
|
};
|
|
|
|
|
|
|
|
} // namespace
|
|
|
|
|
|
|
|
const Comparator* Uint64Comparator() {
|
|
|
|
static Uint64ComparatorImpl uint64comp;
|
|
|
|
return &uint64comp;
|
|
|
|
}
|
|
|
|
|
|
|
|
const Comparator* ComparatorWithU64Ts() {
|
|
|
|
static ComparatorWithU64TsImpl comp_with_u64_ts;
|
|
|
|
return &comp_with_u64_ts;
|
|
|
|
}
|
|
|
|
|
Simplify querying of merge results
Summary:
While working on supporting mixing merge operators with
single deletes ( https://reviews.facebook.net/D43179 ),
I realized that returning and dealing with merge results
can be made simpler. Submitting this as a separate diff
because it is not directly related to single deletes.
Before, callers of merge helper had to retrieve the merge
result in one of two ways depending on whether the merge
was successful or not (success = result of merge was single
kTypeValue). For successful merges, the caller could query
the resulting key/value pair and for unsuccessful merges,
the result could be retrieved in the form of two deques of
keys and values. However, with single deletes, a successful merge
does not return a single key/value pair (if merge
operands are merged with a single delete, we have to generate
a value and keep the original single delete around to make
sure that we are not accidentially producing a key overwrite).
In addition, the two existing call sites of the merge
helper were taking the same actions independently from whether
the merge was successful or not, so this patch simplifies that.
Test Plan: make clean all check
Reviewers: rven, sdong, yhchiang, anthony, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43353
9 years ago
|
|
|
void CorruptKeyType(InternalKey* ikey) {
|
|
|
|
std::string keystr = ikey->Encode().ToString();
|
|
|
|
keystr[keystr.size() - 8] = kTypeLogData;
|
|
|
|
ikey->DecodeFrom(Slice(keystr.data(), keystr.size()));
|
|
|
|
}
|
|
|
|
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
9 years ago
|
|
|
std::string KeyStr(const std::string& user_key, const SequenceNumber& seq,
|
|
|
|
const ValueType& t, bool corrupt) {
|
|
|
|
InternalKey k(user_key, seq, t);
|
|
|
|
if (corrupt) {
|
|
|
|
CorruptKeyType(&k);
|
|
|
|
}
|
|
|
|
return k.Encode().ToString();
|
|
|
|
}
|
|
|
|
|
Allow compaction iterator to perform garbage collection (#7556)
Summary:
Add a threshold timestamp, full_history_ts_low_ of type `std::string*` to
`CompactionIterator`, so that RocksDB can also perform garbage collection during
compaction.
* If full_history_ts_low_ is nullptr, then compaction iterator does not perform
GC, preserving all timestamp history for all keys. Compaction iterator will
treat user key with different timestamps as different user keys.
* If full_history_ts_low_ is not nullptr, then compaction iterator performs
GC. GC will look at keys older than `*full_history_ts_low_` and determine their
eligibility based on factors including snapshots.
Current rules of GC:
* If an internal key is in the same snapshot as a previous counterpart
with the same user key, and this key is eligible for GC, and the key is
not single-delete or merge operand, then this key can be dropped. Note
that the previous internal key cannot be a merge operand either.
* If a tombstone is the most recent one in the earliest snapshot and it
is eligible for GC, and keyNotExistsBeyondLevel() is true, then this
tombstone can be dropped.
* If a tombstone is the most recent one in a snapshot and it is eligible
for GC, and the compaction is at bottommost level, then all other older
internal keys of the same user key must also be eligible for GC, thus
can be dropped
* Single-delete, delete-range and merge are not currently supported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7556
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D24507728
Pulled By: riversand963
fbshipit-source-id: 3c09c7301f41eed76dfcf4d1527e68cf6e0a8bb3
4 years ago
|
|
|
std::string KeyStr(uint64_t ts, const std::string& user_key,
|
|
|
|
const SequenceNumber& seq, const ValueType& t,
|
|
|
|
bool corrupt) {
|
|
|
|
std::string user_key_with_ts(user_key);
|
|
|
|
std::string ts_str;
|
|
|
|
PutFixed64(&ts_str, ts);
|
|
|
|
user_key_with_ts.append(ts_str);
|
|
|
|
return KeyStr(user_key_with_ts, seq, t, corrupt);
|
|
|
|
}
|
|
|
|
|
|
|
|
bool SleepingBackgroundTask::TimedWaitUntilSleeping(uint64_t wait_time) {
|
|
|
|
auto abs_time = SystemClock::Default()->NowMicros() + wait_time;
|
|
|
|
MutexLock l(&mutex_);
|
|
|
|
while (!sleeping_ || !should_sleep_) {
|
|
|
|
if (bg_cv_.TimedWait(abs_time)) {
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool SleepingBackgroundTask::TimedWaitUntilDone(uint64_t wait_time) {
|
|
|
|
auto abs_time = SystemClock::Default()->NowMicros() + wait_time;
|
|
|
|
MutexLock l(&mutex_);
|
|
|
|
while (!done_with_sleep_) {
|
|
|
|
if (bg_cv_.TimedWait(abs_time)) {
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
Add OptionsUtil::LoadOptionsFromFile() API
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
9 years ago
|
|
|
std::string RandomName(Random* rnd, const size_t len) {
|
|
|
|
std::stringstream ss;
|
|
|
|
for (size_t i = 0; i < len; ++i) {
|
|
|
|
ss << static_cast<char>(rnd->Uniform(26) + 'a');
|
|
|
|
}
|
|
|
|
return ss.str();
|
|
|
|
}
|
|
|
|
|
|
|
|
CompressionType RandomCompressionType(Random* rnd) {
|
|
|
|
auto ret = static_cast<CompressionType>(rnd->Uniform(6));
|
|
|
|
while (!CompressionTypeSupported(ret)) {
|
|
|
|
ret = static_cast<CompressionType>((static_cast<int>(ret) + 1) % 6);
|
|
|
|
}
|
|
|
|
return ret;
|
Add OptionsUtil::LoadOptionsFromFile() API
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
9 years ago
|
|
|
}
|
|
|
|
|
|
|
|
void RandomCompressionTypeVector(const size_t count,
|
|
|
|
std::vector<CompressionType>* types,
|
|
|
|
Random* rnd) {
|
|
|
|
types->clear();
|
|
|
|
for (size_t i = 0; i < count; ++i) {
|
|
|
|
types->emplace_back(RandomCompressionType(rnd));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
const SliceTransform* RandomSliceTransform(Random* rnd, int pre_defined) {
|
|
|
|
int random_num = pre_defined >= 0 ? pre_defined : rnd->Uniform(4);
|
|
|
|
switch (random_num) {
|
|
|
|
case 0:
|
|
|
|
return NewFixedPrefixTransform(rnd->Uniform(20) + 1);
|
|
|
|
case 1:
|
|
|
|
return NewCappedPrefixTransform(rnd->Uniform(20) + 1);
|
|
|
|
case 2:
|
|
|
|
return NewNoopTransform();
|
|
|
|
default:
|
|
|
|
return nullptr;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
BlockBasedTableOptions RandomBlockBasedTableOptions(Random* rnd) {
|
|
|
|
BlockBasedTableOptions opt;
|
|
|
|
opt.cache_index_and_filter_blocks = rnd->Uniform(2);
|
Adding pin_l0_filter_and_index_blocks_in_cache feature and related fixes.
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
Test Plan:
'export TEST_TMPDIR=/dev/shm/ && DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32' is OK.
I didn't run the Java tests, I don't have Java set up on my devserver.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56133
9 years ago
|
|
|
opt.pin_l0_filter_and_index_blocks_in_cache = rnd->Uniform(2);
|
|
|
|
opt.pin_top_level_index_and_filter = rnd->Uniform(2);
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
using IndexType = BlockBasedTableOptions::IndexType;
|
|
|
|
const std::array<IndexType, 4> index_types = {
|
|
|
|
{IndexType::kBinarySearch, IndexType::kHashSearch,
|
|
|
|
IndexType::kTwoLevelIndexSearch, IndexType::kBinarySearchWithFirstKey}};
|
|
|
|
opt.index_type =
|
|
|
|
index_types[rnd->Uniform(static_cast<int>(index_types.size()))];
|
Add OptionsUtil::LoadOptionsFromFile() API
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
9 years ago
|
|
|
opt.hash_index_allow_collision = rnd->Uniform(2);
|
|
|
|
opt.checksum = static_cast<ChecksumType>(rnd->Uniform(3));
|
|
|
|
opt.block_size = rnd->Uniform(10000000);
|
|
|
|
opt.block_size_deviation = rnd->Uniform(100);
|
|
|
|
opt.block_restart_interval = rnd->Uniform(100);
|
|
|
|
opt.index_block_restart_interval = rnd->Uniform(100);
|
Add OptionsUtil::LoadOptionsFromFile() API
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
9 years ago
|
|
|
opt.whole_key_filtering = rnd->Uniform(2);
|
|
|
|
|
|
|
|
return opt;
|
|
|
|
}
|
|
|
|
|
|
|
|
TableFactory* RandomTableFactory(Random* rnd, int pre_defined) {
|
|
|
|
#ifndef ROCKSDB_LITE
|
|
|
|
int random_num = pre_defined >= 0 ? pre_defined : rnd->Uniform(4);
|
|
|
|
switch (random_num) {
|
|
|
|
case 0:
|
|
|
|
return NewPlainTableFactory();
|
|
|
|
case 1:
|
|
|
|
return NewCuckooTableFactory();
|
|
|
|
default:
|
|
|
|
return NewBlockBasedTableFactory();
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
(void)rnd;
|
|
|
|
(void)pre_defined;
|
Add OptionsUtil::LoadOptionsFromFile() API
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
9 years ago
|
|
|
return NewBlockBasedTableFactory();
|
|
|
|
#endif // !ROCKSDB_LITE
|
|
|
|
}
|
|
|
|
|
|
|
|
MergeOperator* RandomMergeOperator(Random* rnd) {
|
|
|
|
return new ChanglingMergeOperator(RandomName(rnd, 10));
|
|
|
|
}
|
|
|
|
|
|
|
|
CompactionFilter* RandomCompactionFilter(Random* rnd) {
|
|
|
|
return new ChanglingCompactionFilter(RandomName(rnd, 10));
|
|
|
|
}
|
|
|
|
|
|
|
|
CompactionFilterFactory* RandomCompactionFilterFactory(Random* rnd) {
|
|
|
|
return new ChanglingCompactionFilterFactory(RandomName(rnd, 10));
|
|
|
|
}
|
|
|
|
|
|
|
|
void RandomInitDBOptions(DBOptions* db_opt, Random* rnd) {
|
|
|
|
// boolean options
|
|
|
|
db_opt->advise_random_on_open = rnd->Uniform(2);
|
|
|
|
db_opt->allow_mmap_reads = rnd->Uniform(2);
|
|
|
|
db_opt->allow_mmap_writes = rnd->Uniform(2);
|
|
|
|
db_opt->use_direct_reads = rnd->Uniform(2);
|
|
|
|
db_opt->use_direct_io_for_flush_and_compaction = rnd->Uniform(2);
|
Add OptionsUtil::LoadOptionsFromFile() API
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
9 years ago
|
|
|
db_opt->create_if_missing = rnd->Uniform(2);
|
|
|
|
db_opt->create_missing_column_families = rnd->Uniform(2);
|
|
|
|
db_opt->enable_thread_tracking = rnd->Uniform(2);
|
|
|
|
db_opt->error_if_exists = rnd->Uniform(2);
|
|
|
|
db_opt->is_fd_close_on_exec = rnd->Uniform(2);
|
|
|
|
db_opt->paranoid_checks = rnd->Uniform(2);
|
|
|
|
db_opt->track_and_verify_wals_in_manifest = rnd->Uniform(2);
|
Add OptionsUtil::LoadOptionsFromFile() API
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
9 years ago
|
|
|
db_opt->skip_log_error_on_recovery = rnd->Uniform(2);
|
|
|
|
db_opt->skip_stats_update_on_db_open = rnd->Uniform(2);
|
Add an option to prevent DB::Open() from querying sizes of all sst files (#6353)
Summary:
When paranoid_checks is on, DBImpl::CheckConsistency() iterates over all sst files and calls Env::GetFileSize() for each of them. As far as I could understand, this is pretty arbitrary and doesn't affect correctness - if filesystem doesn't corrupt fsynced files, the file sizes will always match; if it does, it may as well corrupt contents as well as sizes, and rocksdb doesn't check contents on open.
If there are thousands of sst files, getting all their sizes takes a while. If, on top of that, Env is overridden to use some remote storage instead of local filesystem, it can be *really* slow and overload the remote storage service. This PR adds an option to not do GetFileSize(); instead it does GetChildren() for parent directory to check that all the expected sst files are at least present, but doesn't check their sizes.
We can't just disable paranoid_checks instead because paranoid_checks do a few other important things: make the DB read-only on write errors, print error messages on read errors, etc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6353
Test Plan: ran the added sanity check unit test. Will try it out in a LogDevice test cluster where the GetFileSize() calls are causing a lot of trouble.
Differential Revision: D19656425
Pulled By: al13n321
fbshipit-source-id: c2c421b367633033760d1f56747bad206d1fbf82
5 years ago
|
|
|
db_opt->skip_checking_sst_file_sizes_on_db_open = rnd->Uniform(2);
|
Add OptionsUtil::LoadOptionsFromFile() API
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
9 years ago
|
|
|
db_opt->use_adaptive_mutex = rnd->Uniform(2);
|
|
|
|
db_opt->use_fsync = rnd->Uniform(2);
|
|
|
|
db_opt->recycle_log_file_num = rnd->Uniform(2);
|
|
|
|
db_opt->avoid_flush_during_recovery = rnd->Uniform(2);
|
|
|
|
db_opt->avoid_flush_during_shutdown = rnd->Uniform(2);
|
Add OptionsUtil::LoadOptionsFromFile() API
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
9 years ago
|
|
|
|
|
|
|
// int options
|
|
|
|
db_opt->max_background_compactions = rnd->Uniform(100);
|
|
|
|
db_opt->max_background_flushes = rnd->Uniform(100);
|
|
|
|
db_opt->max_file_opening_threads = rnd->Uniform(100);
|
|
|
|
db_opt->max_open_files = rnd->Uniform(100);
|
|
|
|
db_opt->table_cache_numshardbits = rnd->Uniform(100);
|
|
|
|
|
|
|
|
// size_t options
|
|
|
|
db_opt->db_write_buffer_size = rnd->Uniform(10000);
|
|
|
|
db_opt->keep_log_file_num = rnd->Uniform(10000);
|
|
|
|
db_opt->log_file_time_to_roll = rnd->Uniform(10000);
|
|
|
|
db_opt->manifest_preallocation_size = rnd->Uniform(10000);
|
|
|
|
db_opt->max_log_file_size = rnd->Uniform(10000);
|
|
|
|
|
|
|
|
// std::string options
|
|
|
|
db_opt->db_log_dir = "path/to/db_log_dir";
|
|
|
|
db_opt->wal_dir = "path/to/wal_dir";
|
|
|
|
|
|
|
|
// uint32_t options
|
|
|
|
db_opt->max_subcompactions = rnd->Uniform(100000);
|
|
|
|
|
|
|
|
// uint64_t options
|
|
|
|
static const uint64_t uint_max = static_cast<uint64_t>(UINT_MAX);
|
|
|
|
db_opt->WAL_size_limit_MB = uint_max + rnd->Uniform(100000);
|
|
|
|
db_opt->WAL_ttl_seconds = uint_max + rnd->Uniform(100000);
|
|
|
|
db_opt->bytes_per_sync = uint_max + rnd->Uniform(100000);
|
|
|
|
db_opt->delayed_write_rate = uint_max + rnd->Uniform(100000);
|
|
|
|
db_opt->delete_obsolete_files_period_micros = uint_max + rnd->Uniform(100000);
|
|
|
|
db_opt->max_manifest_file_size = uint_max + rnd->Uniform(100000);
|
|
|
|
db_opt->max_total_wal_size = uint_max + rnd->Uniform(100000);
|
|
|
|
db_opt->wal_bytes_per_sync = uint_max + rnd->Uniform(100000);
|
|
|
|
|
|
|
|
// unsigned int options
|
|
|
|
db_opt->stats_dump_period_sec = rnd->Uniform(100000);
|
|
|
|
}
|
|
|
|
|
|
|
|
void RandomInitCFOptions(ColumnFamilyOptions* cf_opt, DBOptions& db_options,
|
|
|
|
Random* rnd) {
|
Add OptionsUtil::LoadOptionsFromFile() API
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
9 years ago
|
|
|
cf_opt->compaction_style = (CompactionStyle)(rnd->Uniform(4));
|
|
|
|
|
|
|
|
// boolean options
|
|
|
|
cf_opt->report_bg_io_stats = rnd->Uniform(2);
|
Add OptionsUtil::LoadOptionsFromFile() API
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
9 years ago
|
|
|
cf_opt->disable_auto_compactions = rnd->Uniform(2);
|
|
|
|
cf_opt->inplace_update_support = rnd->Uniform(2);
|
|
|
|
cf_opt->level_compaction_dynamic_level_bytes = rnd->Uniform(2);
|
|
|
|
cf_opt->optimize_filters_for_hits = rnd->Uniform(2);
|
|
|
|
cf_opt->paranoid_file_checks = rnd->Uniform(2);
|
|
|
|
cf_opt->purge_redundant_kvs_while_flush = rnd->Uniform(2);
|
|
|
|
cf_opt->force_consistency_checks = rnd->Uniform(2);
|
|
|
|
cf_opt->compaction_options_fifo.allow_compaction = rnd->Uniform(2);
|
|
|
|
cf_opt->memtable_whole_key_filtering = rnd->Uniform(2);
|
|
|
|
cf_opt->enable_blob_files = rnd->Uniform(2);
|
|
|
|
cf_opt->enable_blob_garbage_collection = rnd->Uniform(2);
|
Add OptionsUtil::LoadOptionsFromFile() API
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
9 years ago
|
|
|
|
|
|
|
// double options
|
|
|
|
cf_opt->hard_rate_limit = static_cast<double>(rnd->Uniform(10000)) / 13;
|
|
|
|
cf_opt->soft_rate_limit = static_cast<double>(rnd->Uniform(10000)) / 13;
|
|
|
|
cf_opt->memtable_prefix_bloom_size_ratio =
|
|
|
|
static_cast<double>(rnd->Uniform(10000)) / 20000.0;
|
|
|
|
cf_opt->blob_garbage_collection_age_cutoff = rnd->Uniform(10000) / 10000.0;
|
Make it possible to force the garbage collection of the oldest blob files (#8994)
Summary:
The current BlobDB garbage collection logic works by relocating the valid
blobs from the oldest blob files as they are encountered during compaction,
and cleaning up blob files once they contain nothing but garbage. However,
with sufficiently skewed workloads, it is theoretically possible to end up in a
situation when few or no compactions get scheduled for the SST files that contain
references to the oldest blob files, which can lead to increased space amp due
to the lack of GC.
In order to efficiently handle such workloads, the patch adds a new BlobDB
configuration option called `blob_garbage_collection_force_threshold`,
which signals to BlobDB to schedule targeted compactions for the SST files
that keep alive the oldest batch of blob files if the overall ratio of garbage in
the given blob files meets the threshold *and* all the given blob files are
eligible for GC based on `blob_garbage_collection_age_cutoff`. (For example,
if the new option is set to 0.9, targeted compactions will get scheduled if the
sum of garbage bytes meets or exceeds 90% of the sum of total bytes in the
oldest blob files, assuming all affected blob files are below the age-based cutoff.)
The net result of these targeted compactions is that the valid blobs in the oldest
blob files are relocated and the oldest blob files themselves cleaned up (since
*all* SST files that rely on them get compacted away).
These targeted compactions are similar to periodic compactions in the sense
that they force certain SST files that otherwise would not get picked up to undergo
compaction and also in the sense that instead of merging files from multiple levels,
they target a single file. (Note: such compactions might still include neighboring files
from the same level due to the need of having a "clean cut" boundary but they never
include any files from any other level.)
This functionality is currently only supported with the leveled compaction style
and is inactive by default (since the default value is set to 1.0, i.e. 100%).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8994
Test Plan: Ran `make check` and tested using `db_bench` and the stress/crash tests.
Reviewed By: riversand963
Differential Revision: D31489850
Pulled By: ltamasi
fbshipit-source-id: 44057d511726a0e2a03c5d9313d7511b3f0c4eab
3 years ago
|
|
|
cf_opt->blob_garbage_collection_force_threshold =
|
|
|
|
rnd->Uniform(10000) / 10000.0;
|
Add OptionsUtil::LoadOptionsFromFile() API
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
9 years ago
|
|
|
|
|
|
|
// int options
|
|
|
|
cf_opt->level0_file_num_compaction_trigger = rnd->Uniform(100);
|
|
|
|
cf_opt->level0_slowdown_writes_trigger = rnd->Uniform(100);
|
|
|
|
cf_opt->level0_stop_writes_trigger = rnd->Uniform(100);
|
|
|
|
cf_opt->max_bytes_for_level_multiplier = rnd->Uniform(100);
|
|
|
|
cf_opt->max_mem_compaction_level = rnd->Uniform(100);
|
|
|
|
cf_opt->max_write_buffer_number = rnd->Uniform(100);
|
|
|
|
cf_opt->max_write_buffer_number_to_maintain = rnd->Uniform(100);
|
Refactor trimming logic for immutable memtables (#5022)
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022
Differential Revision: D14394062
Pulled By: miasantreble
fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
5 years ago
|
|
|
cf_opt->max_write_buffer_size_to_maintain = rnd->Uniform(10000);
|
Add OptionsUtil::LoadOptionsFromFile() API
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
9 years ago
|
|
|
cf_opt->min_write_buffer_number_to_merge = rnd->Uniform(100);
|
|
|
|
cf_opt->num_levels = rnd->Uniform(100);
|
|
|
|
cf_opt->target_file_size_multiplier = rnd->Uniform(100);
|
|
|
|
|
|
|
|
// vector int options
|
|
|
|
cf_opt->max_bytes_for_level_multiplier_additional.resize(cf_opt->num_levels);
|
|
|
|
for (int i = 0; i < cf_opt->num_levels; i++) {
|
|
|
|
cf_opt->max_bytes_for_level_multiplier_additional[i] = rnd->Uniform(100);
|
|
|
|
}
|
|
|
|
|
Add OptionsUtil::LoadOptionsFromFile() API
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
9 years ago
|
|
|
// size_t options
|
|
|
|
cf_opt->arena_block_size = rnd->Uniform(10000);
|
|
|
|
cf_opt->inplace_update_num_locks = rnd->Uniform(10000);
|
|
|
|
cf_opt->max_successive_merges = rnd->Uniform(10000);
|
|
|
|
cf_opt->memtable_huge_page_size = rnd->Uniform(10000);
|
Add OptionsUtil::LoadOptionsFromFile() API
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
9 years ago
|
|
|
cf_opt->write_buffer_size = rnd->Uniform(10000);
|
|
|
|
|
|
|
|
// uint32_t options
|
|
|
|
cf_opt->bloom_locality = rnd->Uniform(10000);
|
|
|
|
cf_opt->max_bytes_for_level_base = rnd->Uniform(10000);
|
|
|
|
|
|
|
|
// uint64_t options
|
|
|
|
static const uint64_t uint_max = static_cast<uint64_t>(UINT_MAX);
|
|
|
|
cf_opt->ttl =
|
|
|
|
db_options.max_open_files == -1 ? uint_max + rnd->Uniform(10000) : 0;
|
|
|
|
cf_opt->periodic_compaction_seconds =
|
|
|
|
db_options.max_open_files == -1 ? uint_max + rnd->Uniform(10000) : 0;
|
Add OptionsUtil::LoadOptionsFromFile() API
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
9 years ago
|
|
|
cf_opt->max_sequential_skip_in_iterations = uint_max + rnd->Uniform(10000);
|
|
|
|
cf_opt->target_file_size_base = uint_max + rnd->Uniform(10000);
|
|
|
|
cf_opt->max_compaction_bytes =
|
|
|
|
cf_opt->target_file_size_base * rnd->Uniform(100);
|
|
|
|
cf_opt->compaction_options_fifo.max_table_files_size =
|
|
|
|
uint_max + rnd->Uniform(10000);
|
|
|
|
cf_opt->min_blob_size = uint_max + rnd->Uniform(10000);
|
|
|
|
cf_opt->blob_file_size = uint_max + rnd->Uniform(10000);
|
|
|
|
cf_opt->blob_compaction_readahead_size = uint_max + rnd->Uniform(10000);
|
Add OptionsUtil::LoadOptionsFromFile() API
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
9 years ago
|
|
|
|
|
|
|
// unsigned int options
|
|
|
|
cf_opt->rate_limit_delay_max_milliseconds = rnd->Uniform(10000);
|
|
|
|
|
|
|
|
// pointer typed options
|
|
|
|
cf_opt->prefix_extractor.reset(RandomSliceTransform(rnd));
|
|
|
|
cf_opt->table_factory.reset(RandomTableFactory(rnd));
|
|
|
|
cf_opt->merge_operator.reset(RandomMergeOperator(rnd));
|
|
|
|
if (cf_opt->compaction_filter) {
|
|
|
|
delete cf_opt->compaction_filter;
|
|
|
|
}
|
|
|
|
cf_opt->compaction_filter = RandomCompactionFilter(rnd);
|
|
|
|
cf_opt->compaction_filter_factory.reset(RandomCompactionFilterFactory(rnd));
|
|
|
|
|
|
|
|
// custom typed options
|
|
|
|
cf_opt->compression = RandomCompressionType(rnd);
|
|
|
|
RandomCompressionTypeVector(cf_opt->num_levels,
|
|
|
|
&cf_opt->compression_per_level, rnd);
|
|
|
|
cf_opt->blob_compression_type = RandomCompressionType(rnd);
|
Add OptionsUtil::LoadOptionsFromFile() API
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
9 years ago
|
|
|
}
|
|
|
|
|
|
|
|
bool IsDirectIOSupported(Env* env, const std::string& dir) {
|
|
|
|
EnvOptions env_options;
|
|
|
|
env_options.use_mmap_writes = false;
|
|
|
|
env_options.use_direct_writes = true;
|
|
|
|
std::string tmp = TempFileName(dir, 999);
|
|
|
|
Status s;
|
|
|
|
{
|
|
|
|
std::unique_ptr<WritableFile> file;
|
|
|
|
s = env->NewWritableFile(tmp, &file, env_options);
|
|
|
|
}
|
|
|
|
if (s.ok()) {
|
|
|
|
s = env->DeleteFile(tmp);
|
|
|
|
}
|
|
|
|
return s.ok();
|
|
|
|
}
|
|
|
|
|
|
|
|
bool IsPrefetchSupported(const std::shared_ptr<FileSystem>& fs,
|
|
|
|
const std::string& dir) {
|
|
|
|
bool supported = false;
|
|
|
|
std::string tmp = TempFileName(dir, 999);
|
|
|
|
Random rnd(301);
|
|
|
|
std::string test_string = rnd.RandomString(4096);
|
|
|
|
Slice data(test_string);
|
|
|
|
Status s = WriteStringToFile(fs.get(), data, tmp, true);
|
|
|
|
if (s.ok()) {
|
|
|
|
std::unique_ptr<FSRandomAccessFile> file;
|
|
|
|
auto io_s = fs->NewRandomAccessFile(tmp, FileOptions(), &file, nullptr);
|
|
|
|
if (io_s.ok()) {
|
|
|
|
supported = !(file->Prefetch(0, data.size(), IOOptions(), nullptr)
|
|
|
|
.IsNotSupported());
|
|
|
|
}
|
|
|
|
s = fs->DeleteFile(tmp, IOOptions(), nullptr);
|
|
|
|
}
|
|
|
|
return s.ok() && supported;
|
|
|
|
}
|
|
|
|
|
|
|
|
size_t GetLinesCount(const std::string& fname, const std::string& pattern) {
|
|
|
|
std::stringstream ssbuf;
|
|
|
|
std::string line;
|
|
|
|
size_t count = 0;
|
|
|
|
|
|
|
|
std::ifstream inFile(fname.c_str());
|
|
|
|
ssbuf << inFile.rdbuf();
|
|
|
|
|
|
|
|
while (getline(ssbuf, line)) {
|
|
|
|
if (line.find(pattern) != std::string::npos) {
|
|
|
|
count++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
Fix many tests to run with MEM_ENV and ENCRYPTED_ENV; Introduce a MemoryFileSystem class (#7566)
Summary:
This PR does a few things:
1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.
2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).
3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).
I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.
Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.
Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566
Reviewed By: zhichao-cao
Differential Revision: D24408980
Pulled By: jay-zhuang
fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
4 years ago
|
|
|
Status CorruptFile(Env* env, const std::string& fname, int offset,
|
|
|
|
int bytes_to_corrupt, bool verify_checksum /*=true*/) {
|
|
|
|
uint64_t size;
|
|
|
|
Status s = env->GetFileSize(fname, &size);
|
|
|
|
if (!s.ok()) {
|
|
|
|
return s;
|
|
|
|
} else if (offset < 0) {
|
|
|
|
// Relative to end of file; make it absolute
|
Fix many tests to run with MEM_ENV and ENCRYPTED_ENV; Introduce a MemoryFileSystem class (#7566)
Summary:
This PR does a few things:
1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.
2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).
3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).
I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.
Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.
Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566
Reviewed By: zhichao-cao
Differential Revision: D24408980
Pulled By: jay-zhuang
fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
4 years ago
|
|
|
if (-offset > static_cast<int>(size)) {
|
|
|
|
offset = 0;
|
|
|
|
} else {
|
Fix many tests to run with MEM_ENV and ENCRYPTED_ENV; Introduce a MemoryFileSystem class (#7566)
Summary:
This PR does a few things:
1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.
2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).
3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).
I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.
Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.
Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566
Reviewed By: zhichao-cao
Differential Revision: D24408980
Pulled By: jay-zhuang
fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
4 years ago
|
|
|
offset = static_cast<int>(size + offset);
|
|
|
|
}
|
|
|
|
}
|
Fix many tests to run with MEM_ENV and ENCRYPTED_ENV; Introduce a MemoryFileSystem class (#7566)
Summary:
This PR does a few things:
1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.
2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).
3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).
I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.
Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.
Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566
Reviewed By: zhichao-cao
Differential Revision: D24408980
Pulled By: jay-zhuang
fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
4 years ago
|
|
|
if (offset > static_cast<int>(size)) {
|
|
|
|
offset = static_cast<int>(size);
|
|
|
|
}
|
Fix many tests to run with MEM_ENV and ENCRYPTED_ENV; Introduce a MemoryFileSystem class (#7566)
Summary:
This PR does a few things:
1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.
2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).
3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).
I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.
Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.
Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566
Reviewed By: zhichao-cao
Differential Revision: D24408980
Pulled By: jay-zhuang
fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
4 years ago
|
|
|
if (offset + bytes_to_corrupt > static_cast<int>(size)) {
|
|
|
|
bytes_to_corrupt = static_cast<int>(size - offset);
|
|
|
|
}
|
|
|
|
|
|
|
|
// Do it
|
|
|
|
std::string contents;
|
Fix many tests to run with MEM_ENV and ENCRYPTED_ENV; Introduce a MemoryFileSystem class (#7566)
Summary:
This PR does a few things:
1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.
2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).
3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).
I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.
Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.
Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566
Reviewed By: zhichao-cao
Differential Revision: D24408980
Pulled By: jay-zhuang
fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
4 years ago
|
|
|
s = ReadFileToString(env, fname, &contents);
|
|
|
|
if (s.ok()) {
|
|
|
|
for (int i = 0; i < bytes_to_corrupt; i++) {
|
|
|
|
contents[i + offset] ^= 0x80;
|
|
|
|
}
|
|
|
|
s = WriteStringToFile(env, contents, fname);
|
|
|
|
}
|
Fix many tests to run with MEM_ENV and ENCRYPTED_ENV; Introduce a MemoryFileSystem class (#7566)
Summary:
This PR does a few things:
1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.
2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).
3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).
I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.
Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.
Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566
Reviewed By: zhichao-cao
Differential Revision: D24408980
Pulled By: jay-zhuang
fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
4 years ago
|
|
|
if (s.ok() && verify_checksum) {
|
|
|
|
#ifndef ROCKSDB_LITE
|
Fix many tests to run with MEM_ENV and ENCRYPTED_ENV; Introduce a MemoryFileSystem class (#7566)
Summary:
This PR does a few things:
1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.
2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).
3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).
I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.
Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.
Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566
Reviewed By: zhichao-cao
Differential Revision: D24408980
Pulled By: jay-zhuang
fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
4 years ago
|
|
|
Options options;
|
|
|
|
options.env = env;
|
|
|
|
EnvOptions env_options;
|
|
|
|
Status v = VerifySstFileChecksum(options, env_options, fname);
|
|
|
|
assert(!v.ok());
|
|
|
|
#endif
|
Fix many tests to run with MEM_ENV and ENCRYPTED_ENV; Introduce a MemoryFileSystem class (#7566)
Summary:
This PR does a few things:
1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.
2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).
3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).
I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.
Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.
Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566
Reviewed By: zhichao-cao
Differential Revision: D24408980
Pulled By: jay-zhuang
fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
4 years ago
|
|
|
}
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
Status TruncateFile(Env* env, const std::string& fname, uint64_t new_length) {
|
|
|
|
uint64_t old_length;
|
|
|
|
Status s = env->GetFileSize(fname, &old_length);
|
|
|
|
if (!s.ok() || new_length == old_length) {
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
// Do it
|
|
|
|
std::string contents;
|
|
|
|
s = ReadFileToString(env, fname, &contents);
|
|
|
|
if (s.ok()) {
|
|
|
|
contents.resize(static_cast<size_t>(new_length), 'b');
|
|
|
|
s = WriteStringToFile(env, contents, fname);
|
|
|
|
}
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Try and delete a directory if it exists
|
|
|
|
Status TryDeleteDir(Env* env, const std::string& dirname) {
|
|
|
|
bool is_dir = false;
|
|
|
|
Status s = env->IsDirectory(dirname, &is_dir);
|
|
|
|
if (s.ok() && is_dir) {
|
|
|
|
s = env->DeleteDir(dirname);
|
|
|
|
}
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Delete a directory if it exists
|
|
|
|
void DeleteDir(Env* env, const std::string& dirname) {
|
|
|
|
TryDeleteDir(env, dirname).PermitUncheckedError();
|
|
|
|
}
|
|
|
|
|
|
|
|
Status CreateEnvFromSystem(const ConfigOptions& config_options, Env** result,
|
|
|
|
std::shared_ptr<Env>* guard) {
|
|
|
|
const char* env_uri = getenv("TEST_ENV_URI");
|
|
|
|
const char* fs_uri = getenv("TEST_FS_URI");
|
|
|
|
if (env_uri || fs_uri) {
|
|
|
|
return Env::CreateFromUri(config_options,
|
|
|
|
(env_uri != nullptr) ? env_uri : "",
|
|
|
|
(fs_uri != nullptr) ? fs_uri : "", result, guard);
|
|
|
|
} else {
|
|
|
|
// Neither specified. Use the default
|
|
|
|
*result = config_options.env;
|
|
|
|
guard->reset();
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
namespace {
|
|
|
|
// A hacky skip list mem table that triggers flush after number of entries.
|
|
|
|
class SpecialMemTableRep : public MemTableRep {
|
|
|
|
public:
|
|
|
|
explicit SpecialMemTableRep(Allocator* allocator, MemTableRep* memtable,
|
|
|
|
int num_entries_flush)
|
|
|
|
: MemTableRep(allocator),
|
|
|
|
memtable_(memtable),
|
|
|
|
num_entries_flush_(num_entries_flush),
|
|
|
|
num_entries_(0) {}
|
|
|
|
|
|
|
|
virtual KeyHandle Allocate(const size_t len, char** buf) override {
|
|
|
|
return memtable_->Allocate(len, buf);
|
|
|
|
}
|
|
|
|
|
|
|
|
// Insert key into the list.
|
|
|
|
// REQUIRES: nothing that compares equal to key is currently in the list.
|
|
|
|
virtual void Insert(KeyHandle handle) override {
|
|
|
|
num_entries_++;
|
|
|
|
memtable_->Insert(handle);
|
|
|
|
}
|
|
|
|
|
|
|
|
void InsertConcurrently(KeyHandle handle) override {
|
|
|
|
num_entries_++;
|
|
|
|
memtable_->Insert(handle);
|
|
|
|
}
|
|
|
|
|
|
|
|
// Returns true iff an entry that compares equal to key is in the list.
|
|
|
|
virtual bool Contains(const char* key) const override {
|
|
|
|
return memtable_->Contains(key);
|
|
|
|
}
|
|
|
|
|
|
|
|
virtual size_t ApproximateMemoryUsage() override {
|
|
|
|
// Return a high memory usage when number of entries exceeds the threshold
|
|
|
|
// to trigger a flush.
|
|
|
|
return (num_entries_ < num_entries_flush_) ? 0 : 1024 * 1024 * 1024;
|
|
|
|
}
|
|
|
|
|
|
|
|
virtual void Get(const LookupKey& k, void* callback_args,
|
|
|
|
bool (*callback_func)(void* arg,
|
|
|
|
const char* entry)) override {
|
|
|
|
memtable_->Get(k, callback_args, callback_func);
|
|
|
|
}
|
|
|
|
|
|
|
|
uint64_t ApproximateNumEntries(const Slice& start_ikey,
|
|
|
|
const Slice& end_ikey) override {
|
|
|
|
return memtable_->ApproximateNumEntries(start_ikey, end_ikey);
|
|
|
|
}
|
|
|
|
|
|
|
|
virtual MemTableRep::Iterator* GetIterator(Arena* arena = nullptr) override {
|
|
|
|
return memtable_->GetIterator(arena);
|
|
|
|
}
|
|
|
|
|
|
|
|
virtual ~SpecialMemTableRep() override {}
|
|
|
|
|
|
|
|
private:
|
|
|
|
std::unique_ptr<MemTableRep> memtable_;
|
|
|
|
int num_entries_flush_;
|
|
|
|
int num_entries_;
|
|
|
|
};
|
|
|
|
class SpecialSkipListFactory : public MemTableRepFactory {
|
|
|
|
public:
|
|
|
|
#ifndef ROCKSDB_LITE
|
|
|
|
static bool Register(ObjectLibrary& library, const std::string& /*arg*/) {
|
|
|
|
library.AddFactory<MemTableRepFactory>(
|
|
|
|
ObjectLibrary::PatternEntry(SpecialSkipListFactory::kClassName(), true)
|
|
|
|
.AddNumber(":"),
|
|
|
|
[](const std::string& uri, std::unique_ptr<MemTableRepFactory>* guard,
|
|
|
|
std::string* /* errmsg */) {
|
|
|
|
auto colon = uri.find(":");
|
|
|
|
if (colon != std::string::npos) {
|
|
|
|
auto count = ParseInt(uri.substr(colon + 1));
|
|
|
|
guard->reset(new SpecialSkipListFactory(count));
|
|
|
|
} else {
|
|
|
|
guard->reset(new SpecialSkipListFactory(2));
|
|
|
|
}
|
|
|
|
return guard->get();
|
|
|
|
});
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
#endif // ROCKSDB_LITE
|
|
|
|
// After number of inserts exceeds `num_entries_flush` in a mem table, trigger
|
|
|
|
// flush.
|
|
|
|
explicit SpecialSkipListFactory(int num_entries_flush)
|
|
|
|
: num_entries_flush_(num_entries_flush) {}
|
|
|
|
|
|
|
|
using MemTableRepFactory::CreateMemTableRep;
|
|
|
|
virtual MemTableRep* CreateMemTableRep(
|
|
|
|
const MemTableRep::KeyComparator& compare, Allocator* allocator,
|
|
|
|
const SliceTransform* transform, Logger* /*logger*/) override {
|
|
|
|
return new SpecialMemTableRep(
|
|
|
|
allocator,
|
|
|
|
factory_.CreateMemTableRep(compare, allocator, transform, nullptr),
|
|
|
|
num_entries_flush_);
|
|
|
|
}
|
|
|
|
static const char* kClassName() { return "SpecialSkipListFactory"; }
|
|
|
|
virtual const char* Name() const override { return kClassName(); }
|
|
|
|
std::string GetId() const override {
|
|
|
|
std::string id = Name();
|
|
|
|
if (num_entries_flush_ > 0) {
|
|
|
|
id.append(":").append(ROCKSDB_NAMESPACE::ToString(num_entries_flush_));
|
|
|
|
}
|
|
|
|
return id;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool IsInsertConcurrentlySupported() const override {
|
|
|
|
return factory_.IsInsertConcurrentlySupported();
|
|
|
|
}
|
|
|
|
|
|
|
|
private:
|
|
|
|
SkipListFactory factory_;
|
|
|
|
int num_entries_flush_;
|
|
|
|
};
|
|
|
|
} // namespace
|
|
|
|
|
|
|
|
MemTableRepFactory* NewSpecialSkipListFactory(int num_entries_per_flush) {
|
|
|
|
RegisterTestLibrary();
|
|
|
|
return new SpecialSkipListFactory(num_entries_per_flush);
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifndef ROCKSDB_LITE
|
|
|
|
// This method loads existing test classes into the ObjectRegistry
|
|
|
|
int RegisterTestObjects(ObjectLibrary& library, const std::string& arg) {
|
|
|
|
size_t num_types;
|
|
|
|
library.AddFactory<const Comparator>(
|
|
|
|
test::SimpleSuffixReverseComparator::kClassName(),
|
|
|
|
[](const std::string& /*uri*/,
|
|
|
|
std::unique_ptr<const Comparator>* /*guard*/,
|
|
|
|
std::string* /* errmsg */) {
|
|
|
|
static test::SimpleSuffixReverseComparator ssrc;
|
|
|
|
return &ssrc;
|
|
|
|
});
|
|
|
|
SpecialSkipListFactory::Register(library, arg);
|
|
|
|
library.AddFactory<MergeOperator>(
|
|
|
|
"Changling",
|
|
|
|
[](const std::string& uri, std::unique_ptr<MergeOperator>* guard,
|
|
|
|
std::string* /* errmsg */) {
|
|
|
|
guard->reset(new test::ChanglingMergeOperator(uri));
|
|
|
|
return guard->get();
|
|
|
|
});
|
|
|
|
library.AddFactory<CompactionFilter>(
|
|
|
|
"Changling",
|
|
|
|
[](const std::string& uri, std::unique_ptr<CompactionFilter>* /*guard*/,
|
|
|
|
std::string* /* errmsg */) {
|
|
|
|
return new test::ChanglingCompactionFilter(uri);
|
|
|
|
});
|
|
|
|
library.AddFactory<CompactionFilterFactory>(
|
|
|
|
"Changling", [](const std::string& uri,
|
|
|
|
std::unique_ptr<CompactionFilterFactory>* guard,
|
|
|
|
std::string* /* errmsg */) {
|
|
|
|
guard->reset(new test::ChanglingCompactionFilterFactory(uri));
|
|
|
|
return guard->get();
|
|
|
|
});
|
|
|
|
library.AddFactory<SystemClock>(
|
|
|
|
MockSystemClock::kClassName(),
|
|
|
|
[](const std::string& /*uri*/, std::unique_ptr<SystemClock>* guard,
|
|
|
|
std::string* /* errmsg */) {
|
|
|
|
guard->reset(new MockSystemClock(SystemClock::Default()));
|
|
|
|
return guard->get();
|
|
|
|
});
|
|
|
|
return static_cast<int>(library.GetFactoryCount(&num_types));
|
|
|
|
}
|
|
|
|
|
|
|
|
#endif // ROCKSDB_LITE
|
|
|
|
|
|
|
|
void RegisterTestLibrary(const std::string& arg) {
|
|
|
|
static bool registered = false;
|
|
|
|
if (!registered) {
|
|
|
|
registered = true;
|
|
|
|
#ifndef ROCKSDB_LITE
|
|
|
|
ObjectRegistry::Default()->AddLibrary("test", RegisterTestObjects, arg);
|
|
|
|
#else
|
|
|
|
(void)arg;
|
|
|
|
#endif // ROCKSDB_LITE
|
|
|
|
}
|
|
|
|
}
|
|
|
|
} // namespace test
|
|
|
|
} // namespace ROCKSDB_NAMESPACE
|