|
|
|
// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
|
|
|
|
// This source code is licensed under both the GPLv2 (found in the
|
|
|
|
// COPYING file in the root directory) and Apache 2.0 License
|
|
|
|
// (found in the LICENSE.Apache file in the root directory).
|
|
|
|
|
|
|
|
#include "db/write_thread.h"
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
#include <chrono>
|
|
|
|
#include <thread>
|
|
|
|
#include "db/column_family.h"
|
|
|
|
#include "port/port.h"
|
|
|
|
#include "util/random.h"
|
|
|
|
#include "util/sync_point.h"
|
|
|
|
|
|
|
|
namespace rocksdb {
|
|
|
|
|
|
|
|
WriteThread::WriteThread(const ImmutableDBOptions& db_options)
|
|
|
|
: max_yield_usec_(db_options.enable_write_thread_adaptive_yield
|
|
|
|
? db_options.write_thread_max_yield_usec
|
|
|
|
: 0),
|
|
|
|
slow_yield_usec_(db_options.write_thread_slow_yield_usec),
|
|
|
|
allow_concurrent_memtable_write_(
|
|
|
|
db_options.allow_concurrent_memtable_write),
|
|
|
|
enable_pipelined_write_(db_options.enable_pipelined_write),
|
|
|
|
newest_writer_(nullptr),
|
|
|
|
newest_memtable_writer_(nullptr),
|
|
|
|
last_sequence_(0) {}
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
|
|
|
|
uint8_t WriteThread::BlockingAwaitState(Writer* w, uint8_t goal_mask) {
|
|
|
|
// We're going to block. Lazily create the mutex. We guarantee
|
|
|
|
// propagation of this construction to the waker via the
|
|
|
|
// STATE_LOCKED_WAITING state. The waker won't try to touch the mutex
|
|
|
|
// or the condvar unless they CAS away the STATE_LOCKED_WAITING that
|
|
|
|
// we install below.
|
|
|
|
w->CreateMutex();
|
|
|
|
|
|
|
|
auto state = w->state.load(std::memory_order_acquire);
|
|
|
|
assert(state != STATE_LOCKED_WAITING);
|
|
|
|
if ((state & goal_mask) == 0 &&
|
|
|
|
w->state.compare_exchange_strong(state, STATE_LOCKED_WAITING)) {
|
|
|
|
// we have permission (and an obligation) to use StateMutex
|
|
|
|
std::unique_lock<std::mutex> guard(w->StateMutex());
|
|
|
|
w->StateCV().wait(guard, [w] {
|
|
|
|
return w->state.load(std::memory_order_relaxed) != STATE_LOCKED_WAITING;
|
|
|
|
});
|
|
|
|
state = w->state.load(std::memory_order_relaxed);
|
|
|
|
}
|
|
|
|
// else tricky. Goal is met or CAS failed. In the latter case the waker
|
|
|
|
// must have changed the state, and compare_exchange_strong has updated
|
|
|
|
// our local variable with the new one. At the moment WriteThread never
|
|
|
|
// waits for a transition across intermediate states, so we know that
|
|
|
|
// since a state change has occurred the goal must have been met.
|
|
|
|
assert((state & goal_mask) != 0);
|
|
|
|
return state;
|
|
|
|
}
|
|
|
|
|
|
|
|
uint8_t WriteThread::AwaitState(Writer* w, uint8_t goal_mask,
|
|
|
|
AdaptationContext* ctx) {
|
|
|
|
uint8_t state;
|
|
|
|
|
|
|
|
// On a modern Xeon each loop takes about 7 nanoseconds (most of which
|
|
|
|
// is the effect of the pause instruction), so 200 iterations is a bit
|
|
|
|
// more than a microsecond. This is long enough that waits longer than
|
|
|
|
// this can amortize the cost of accessing the clock and yielding.
|
|
|
|
for (uint32_t tries = 0; tries < 200; ++tries) {
|
|
|
|
state = w->state.load(std::memory_order_acquire);
|
|
|
|
if ((state & goal_mask) != 0) {
|
|
|
|
return state;
|
|
|
|
}
|
|
|
|
port::AsmVolatilePause();
|
|
|
|
}
|
|
|
|
|
|
|
|
// If we're only going to end up waiting a short period of time,
|
|
|
|
// it can be a lot more efficient to call std::this_thread::yield()
|
|
|
|
// in a loop than to block in StateMutex(). For reference, on my 4.0
|
|
|
|
// SELinux test server with support for syscall auditing enabled, the
|
|
|
|
// minimum latency between FUTEX_WAKE to returning from FUTEX_WAIT is
|
|
|
|
// 2.7 usec, and the average is more like 10 usec. That can be a big
|
|
|
|
// drag on RockDB's single-writer design. Of course, spinning is a
|
|
|
|
// bad idea if other threads are waiting to run or if we're going to
|
|
|
|
// wait for a long time. How do we decide?
|
|
|
|
//
|
|
|
|
// We break waiting into 3 categories: short-uncontended,
|
|
|
|
// short-contended, and long. If we had an oracle, then we would always
|
|
|
|
// spin for short-uncontended, always block for long, and our choice for
|
|
|
|
// short-contended might depend on whether we were trying to optimize
|
|
|
|
// RocksDB throughput or avoid being greedy with system resources.
|
|
|
|
//
|
|
|
|
// Bucketing into short or long is easy by measuring elapsed time.
|
|
|
|
// Differentiating short-uncontended from short-contended is a bit
|
|
|
|
// trickier, but not too bad. We could look for involuntary context
|
|
|
|
// switches using getrusage(RUSAGE_THREAD, ..), but it's less work
|
|
|
|
// (portability code and CPU) to just look for yield calls that take
|
|
|
|
// longer than we expect. sched_yield() doesn't actually result in any
|
|
|
|
// context switch overhead if there are no other runnable processes
|
|
|
|
// on the current core, in which case it usually takes less than
|
|
|
|
// a microsecond.
|
|
|
|
//
|
|
|
|
// There are two primary tunables here: the threshold between "short"
|
|
|
|
// and "long" waits, and the threshold at which we suspect that a yield
|
|
|
|
// is slow enough to indicate we should probably block. If these
|
|
|
|
// thresholds are chosen well then CPU-bound workloads that don't
|
|
|
|
// have more threads than cores will experience few context switches
|
|
|
|
// (voluntary or involuntary), and the total number of context switches
|
|
|
|
// (voluntary and involuntary) will not be dramatically larger (maybe
|
|
|
|
// 2x) than the number of voluntary context switches that occur when
|
|
|
|
// --max_yield_wait_micros=0.
|
|
|
|
//
|
|
|
|
// There's another constant, which is the number of slow yields we will
|
|
|
|
// tolerate before reversing our previous decision. Solitary slow
|
|
|
|
// yields are pretty common (low-priority small jobs ready to run),
|
|
|
|
// so this should be at least 2. We set this conservatively to 3 so
|
|
|
|
// that we can also immediately schedule a ctx adaptation, rather than
|
|
|
|
// waiting for the next update_ctx.
|
|
|
|
|
|
|
|
const size_t kMaxSlowYieldsWhileSpinning = 3;
|
|
|
|
|
|
|
|
bool update_ctx = false;
|
|
|
|
bool would_spin_again = false;
|
|
|
|
|
|
|
|
if (max_yield_usec_ > 0) {
|
|
|
|
update_ctx = Random::GetTLSInstance()->OneIn(256);
|
|
|
|
|
|
|
|
if (update_ctx || ctx->value.load(std::memory_order_relaxed) >= 0) {
|
|
|
|
// we're updating the adaptation statistics, or spinning has >
|
|
|
|
// 50% chance of being shorter than max_yield_usec_ and causing no
|
|
|
|
// involuntary context switches
|
|
|
|
auto spin_begin = std::chrono::steady_clock::now();
|
|
|
|
|
|
|
|
// this variable doesn't include the final yield (if any) that
|
|
|
|
// causes the goal to be met
|
|
|
|
size_t slow_yield_count = 0;
|
|
|
|
|
|
|
|
auto iter_begin = spin_begin;
|
|
|
|
while ((iter_begin - spin_begin) <=
|
|
|
|
std::chrono::microseconds(max_yield_usec_)) {
|
|
|
|
std::this_thread::yield();
|
|
|
|
|
|
|
|
state = w->state.load(std::memory_order_acquire);
|
|
|
|
if ((state & goal_mask) != 0) {
|
|
|
|
// success
|
|
|
|
would_spin_again = true;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
auto now = std::chrono::steady_clock::now();
|
|
|
|
if (now == iter_begin ||
|
|
|
|
now - iter_begin >= std::chrono::microseconds(slow_yield_usec_)) {
|
|
|
|
// conservatively count it as a slow yield if our clock isn't
|
|
|
|
// accurate enough to measure the yield duration
|
|
|
|
++slow_yield_count;
|
|
|
|
if (slow_yield_count >= kMaxSlowYieldsWhileSpinning) {
|
|
|
|
// Not just one ivcsw, but several. Immediately update ctx
|
|
|
|
// and fall back to blocking
|
|
|
|
update_ctx = true;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
iter_begin = now;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((state & goal_mask) == 0) {
|
|
|
|
state = BlockingAwaitState(w, goal_mask);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (update_ctx) {
|
|
|
|
auto v = ctx->value.load(std::memory_order_relaxed);
|
|
|
|
// fixed point exponential decay with decay constant 1/1024, with +1
|
|
|
|
// and -1 scaled to avoid overflow for int32_t
|
|
|
|
v = v + (v / 1024) + (would_spin_again ? 1 : -1) * 16384;
|
|
|
|
ctx->value.store(v, std::memory_order_relaxed);
|
|
|
|
}
|
|
|
|
|
|
|
|
assert((state & goal_mask) != 0);
|
|
|
|
return state;
|
|
|
|
}
|
|
|
|
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
void WriteThread::SetState(Writer* w, uint8_t new_state) {
|
|
|
|
auto state = w->state.load(std::memory_order_acquire);
|
|
|
|
if (state == STATE_LOCKED_WAITING ||
|
|
|
|
!w->state.compare_exchange_strong(state, new_state)) {
|
|
|
|
assert(state == STATE_LOCKED_WAITING);
|
|
|
|
|
|
|
|
std::lock_guard<std::mutex> guard(w->StateMutex());
|
|
|
|
assert(w->state.load(std::memory_order_relaxed) != new_state);
|
|
|
|
w->state.store(new_state, std::memory_order_relaxed);
|
|
|
|
w->StateCV().notify_one();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
bool WriteThread::LinkOne(Writer* w, std::atomic<Writer*>* newest_writer) {
|
|
|
|
assert(newest_writer != nullptr);
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
assert(w->state == STATE_INIT);
|
|
|
|
Writer* writers = newest_writer->load(std::memory_order_relaxed);
|
|
|
|
while (true) {
|
|
|
|
w->link_older = writers;
|
|
|
|
if (newest_writer->compare_exchange_weak(writers, w)) {
|
|
|
|
return (writers == nullptr);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
bool WriteThread::LinkGroup(WriteGroup& write_group,
|
|
|
|
std::atomic<Writer*>* newest_writer) {
|
|
|
|
assert(newest_writer != nullptr);
|
|
|
|
Writer* leader = write_group.leader;
|
|
|
|
Writer* last_writer = write_group.last_writer;
|
|
|
|
Writer* w = last_writer;
|
|
|
|
while (true) {
|
|
|
|
// Unset link_newer pointers to make sure when we call
|
|
|
|
// CreateMissingNewerLinks later it create all missing links.
|
|
|
|
w->link_newer = nullptr;
|
|
|
|
w->write_group = nullptr;
|
|
|
|
if (w == leader) {
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
w = w->link_older;
|
|
|
|
}
|
|
|
|
Writer* newest = newest_writer->load(std::memory_order_relaxed);
|
|
|
|
while (true) {
|
|
|
|
leader->link_older = newest;
|
|
|
|
if (newest_writer->compare_exchange_weak(newest, last_writer)) {
|
|
|
|
return (newest == nullptr);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void WriteThread::CreateMissingNewerLinks(Writer* head) {
|
|
|
|
while (true) {
|
|
|
|
Writer* next = head->link_older;
|
|
|
|
if (next == nullptr || next->link_newer != nullptr) {
|
|
|
|
assert(next == nullptr || next->link_newer == head);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
next->link_newer = head;
|
|
|
|
head = next;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void WriteThread::CompleteLeader(WriteGroup& write_group) {
|
|
|
|
assert(write_group.size > 0);
|
|
|
|
Writer* leader = write_group.leader;
|
|
|
|
if (write_group.size == 1) {
|
|
|
|
write_group.leader = nullptr;
|
|
|
|
write_group.last_writer = nullptr;
|
|
|
|
} else {
|
|
|
|
assert(leader->link_newer != nullptr);
|
|
|
|
leader->link_newer->link_older = nullptr;
|
|
|
|
write_group.leader = leader->link_newer;
|
|
|
|
}
|
|
|
|
write_group.size -= 1;
|
|
|
|
SetState(leader, STATE_COMPLETED);
|
|
|
|
}
|
|
|
|
|
|
|
|
void WriteThread::CompleteFollower(Writer* w, WriteGroup& write_group) {
|
|
|
|
assert(write_group.size > 1);
|
|
|
|
assert(w != write_group.leader);
|
|
|
|
if (w == write_group.last_writer) {
|
|
|
|
w->link_older->link_newer = nullptr;
|
|
|
|
write_group.last_writer = w->link_older;
|
|
|
|
} else {
|
|
|
|
w->link_older->link_newer = w->link_newer;
|
|
|
|
w->link_newer->link_older = w->link_older;
|
|
|
|
}
|
|
|
|
write_group.size -= 1;
|
|
|
|
SetState(w, STATE_COMPLETED);
|
|
|
|
}
|
|
|
|
|
|
|
|
static WriteThread::AdaptationContext jbg_ctx("JoinBatchGroup");
|
|
|
|
void WriteThread::JoinBatchGroup(Writer* w) {
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
|
|
|
|
assert(w->batch != nullptr);
|
|
|
|
bool linked_as_leader = LinkOne(w, &newest_writer_);
|
|
|
|
if (linked_as_leader) {
|
|
|
|
SetState(w, STATE_GROUP_LEADER);
|
|
|
|
}
|
|
|
|
|
|
|
|
TEST_SYNC_POINT_CALLBACK("WriteThread::JoinBatchGroup:Wait", w);
|
|
|
|
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
if (!linked_as_leader) {
|
|
|
|
/**
|
|
|
|
* Wait util:
|
|
|
|
* 1) An existing leader pick us as the new leader when it finishes
|
|
|
|
* 2) An existing leader pick us as its follewer and
|
|
|
|
* 2.1) finishes the memtable writes on our behalf
|
|
|
|
* 2.2) Or tell us to finish the memtable writes in pralallel
|
|
|
|
* 3) (pipelined write) An existing leader pick us as its follower and
|
|
|
|
* finish book-keeping and WAL write for us, enqueue us as pending
|
|
|
|
* memtable writer, and
|
|
|
|
* 3.1) we become memtable writer group leader, or
|
|
|
|
* 3.2) an existing memtable writer group leader tell us to finish memtable
|
|
|
|
* writes in parallel.
|
|
|
|
*/
|
|
|
|
AwaitState(w, STATE_GROUP_LEADER | STATE_MEMTABLE_WRITER_LEADER |
|
|
|
|
STATE_PARALLEL_MEMTABLE_WRITER | STATE_COMPLETED,
|
|
|
|
&jbg_ctx);
|
|
|
|
TEST_SYNC_POINT_CALLBACK("WriteThread::JoinBatchGroup:DoneWaiting", w);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
size_t WriteThread::EnterAsBatchGroupLeader(Writer* leader,
|
|
|
|
WriteGroup* write_group) {
|
|
|
|
assert(leader->link_older == nullptr);
|
|
|
|
assert(leader->batch != nullptr);
|
|
|
|
assert(write_group != nullptr);
|
|
|
|
|
|
|
|
size_t size = WriteBatchInternal::ByteSize(leader->batch);
|
|
|
|
|
|
|
|
// Allow the group to grow up to a maximum size, but if the
|
|
|
|
// original write is small, limit the growth so we do not slow
|
|
|
|
// down the small write too much.
|
|
|
|
size_t max_size = 1 << 20;
|
|
|
|
if (size <= (128 << 10)) {
|
|
|
|
max_size = size + (128 << 10);
|
|
|
|
}
|
|
|
|
|
|
|
|
leader->write_group = write_group;
|
|
|
|
write_group->leader = leader;
|
|
|
|
write_group->last_writer = leader;
|
|
|
|
write_group->size = 1;
|
|
|
|
Writer* newest_writer = newest_writer_.load(std::memory_order_acquire);
|
|
|
|
|
|
|
|
// This is safe regardless of any db mutex status of the caller. Previous
|
|
|
|
// calls to ExitAsGroupLeader either didn't call CreateMissingNewerLinks
|
|
|
|
// (they emptied the list and then we added ourself as leader) or had to
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
// explicitly wake us up (the list was non-empty when we added ourself,
|
|
|
|
// so we have already received our MarkJoined).
|
|
|
|
CreateMissingNewerLinks(newest_writer);
|
|
|
|
|
|
|
|
// Tricky. Iteration start (leader) is exclusive and finish
|
|
|
|
// (newest_writer) is inclusive. Iteration goes from old to new.
|
|
|
|
Writer* w = leader;
|
|
|
|
while (w != newest_writer) {
|
|
|
|
w = w->link_newer;
|
|
|
|
|
|
|
|
if (w->sync && !leader->sync) {
|
|
|
|
// Do not include a sync write into a batch handled by a non-sync write.
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (w->no_slowdown != leader->no_slowdown) {
|
|
|
|
// Do not mix writes that are ok with delays with the ones that
|
|
|
|
// request fail on delays.
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!w->disable_wal && leader->disable_wal) {
|
|
|
|
// Do not include a write that needs WAL into a batch that has
|
|
|
|
// WAL disabled.
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (w->batch == nullptr) {
|
|
|
|
// Do not include those writes with nullptr batch. Those are not writes,
|
|
|
|
// those are something else. They want to be alone
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (w->callback != nullptr && !w->callback->AllowWriteBatching()) {
|
|
|
|
// dont batch writes that don't want to be batched
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
auto batch_size = WriteBatchInternal::ByteSize(w->batch);
|
|
|
|
if (size + batch_size > max_size) {
|
|
|
|
// Do not make batch too big
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
w->write_group = write_group;
|
|
|
|
size += batch_size;
|
|
|
|
write_group->last_writer = w;
|
|
|
|
write_group->size++;
|
|
|
|
}
|
|
|
|
return size;
|
|
|
|
}
|
|
|
|
|
|
|
|
void WriteThread::EnterAsMemTableWriter(Writer* leader,
|
|
|
|
WriteGroup* write_group) {
|
|
|
|
assert(leader != nullptr);
|
|
|
|
assert(leader->link_older == nullptr);
|
|
|
|
assert(leader->batch != nullptr);
|
|
|
|
assert(write_group != nullptr);
|
|
|
|
|
|
|
|
size_t size = WriteBatchInternal::ByteSize(leader->batch);
|
|
|
|
|
|
|
|
// Allow the group to grow up to a maximum size, but if the
|
|
|
|
// original write is small, limit the growth so we do not slow
|
|
|
|
// down the small write too much.
|
|
|
|
size_t max_size = 1 << 20;
|
|
|
|
if (size <= (128 << 10)) {
|
|
|
|
max_size = size + (128 << 10);
|
|
|
|
}
|
|
|
|
|
|
|
|
leader->write_group = write_group;
|
|
|
|
write_group->leader = leader;
|
|
|
|
write_group->size = 1;
|
|
|
|
Writer* last_writer = leader;
|
|
|
|
|
|
|
|
if (!allow_concurrent_memtable_write_ || !leader->batch->HasMerge()) {
|
|
|
|
Writer* newest_writer = newest_memtable_writer_.load();
|
|
|
|
CreateMissingNewerLinks(newest_writer);
|
|
|
|
|
|
|
|
Writer* w = leader;
|
|
|
|
while (w != newest_writer) {
|
|
|
|
w = w->link_newer;
|
|
|
|
|
|
|
|
if (w->batch == nullptr) {
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (w->batch->HasMerge()) {
|
|
|
|
break;
|
|
|
|
}
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
|
|
|
|
if (!allow_concurrent_memtable_write_) {
|
|
|
|
auto batch_size = WriteBatchInternal::ByteSize(w->batch);
|
|
|
|
if (size + batch_size > max_size) {
|
|
|
|
// Do not make batch too big
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
size += batch_size;
|
|
|
|
}
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
|
|
|
|
w->write_group = write_group;
|
|
|
|
last_writer = w;
|
|
|
|
write_group->size++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
write_group->last_writer = last_writer;
|
|
|
|
write_group->last_sequence =
|
|
|
|
last_writer->sequence + WriteBatchInternal::Count(last_writer->batch) - 1;
|
|
|
|
}
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
|
|
|
|
void WriteThread::ExitAsMemTableWriter(Writer* self, WriteGroup& write_group) {
|
|
|
|
Writer* leader = write_group.leader;
|
|
|
|
Writer* last_writer = write_group.last_writer;
|
|
|
|
|
|
|
|
Writer* newest_writer = last_writer;
|
|
|
|
if (!newest_memtable_writer_.compare_exchange_strong(newest_writer,
|
|
|
|
nullptr)) {
|
|
|
|
CreateMissingNewerLinks(newest_writer);
|
|
|
|
Writer* next_leader = last_writer->link_newer;
|
|
|
|
assert(next_leader != nullptr);
|
|
|
|
next_leader->link_older = nullptr;
|
|
|
|
SetState(next_leader, STATE_MEMTABLE_WRITER_LEADER);
|
|
|
|
}
|
|
|
|
Writer* w = leader;
|
|
|
|
while (true) {
|
|
|
|
if (!write_group.status.ok()) {
|
|
|
|
w->status = write_group.status;
|
|
|
|
}
|
|
|
|
Writer* next = w->link_newer;
|
|
|
|
if (w != leader) {
|
|
|
|
SetState(w, STATE_COMPLETED);
|
|
|
|
}
|
|
|
|
if (w == last_writer) {
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
w = next;
|
|
|
|
}
|
|
|
|
// Note that leader has to exit last, since it owns the write group.
|
|
|
|
SetState(leader, STATE_COMPLETED);
|
|
|
|
}
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
|
|
|
|
void WriteThread::LaunchParallelMemTableWriters(WriteGroup* write_group) {
|
|
|
|
assert(write_group != nullptr);
|
|
|
|
write_group->running.store(write_group->size);
|
|
|
|
for (auto w : *write_group) {
|
|
|
|
SetState(w, STATE_PARALLEL_MEMTABLE_WRITER);
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static WriteThread::AdaptationContext cpmtw_ctx("CompleteParallelMemTableWriter");
|
|
|
|
// This method is called by both the leader and parallel followers
|
|
|
|
bool WriteThread::CompleteParallelMemTableWriter(Writer* w) {
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
|
|
|
|
auto* write_group = w->write_group;
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
if (!w->status.ok()) {
|
|
|
|
std::lock_guard<std::mutex> guard(write_group->leader->StateMutex());
|
|
|
|
write_group->status = w->status;
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
}
|
|
|
|
|
|
|
|
if (write_group->running-- > 1) {
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
// we're not the last one
|
|
|
|
AwaitState(w, STATE_COMPLETED, &cpmtw_ctx);
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
return false;
|
|
|
|
}
|
|
|
|
// else we're the last parallel worker and should perform exit duties.
|
|
|
|
w->status = write_group->status;
|
|
|
|
return true;
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
}
|
|
|
|
|
|
|
|
void WriteThread::ExitAsBatchGroupFollower(Writer* w) {
|
|
|
|
auto* write_group = w->write_group;
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
|
|
|
|
assert(w->state == STATE_PARALLEL_MEMTABLE_WRITER);
|
|
|
|
assert(write_group->status.ok());
|
|
|
|
ExitAsBatchGroupLeader(*write_group, write_group->status);
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
assert(w->status.ok());
|
|
|
|
assert(w->state == STATE_COMPLETED);
|
|
|
|
SetState(write_group->leader, STATE_COMPLETED);
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
}
|
|
|
|
|
|
|
|
static WriteThread::AdaptationContext eabgl_ctx("ExitAsBatchGroupLeader");
|
|
|
|
void WriteThread::ExitAsBatchGroupLeader(WriteGroup& write_group,
|
|
|
|
Status status) {
|
|
|
|
Writer* leader = write_group.leader;
|
|
|
|
Writer* last_writer = write_group.last_writer;
|
|
|
|
assert(leader->link_older == nullptr);
|
|
|
|
|
|
|
|
if (enable_pipelined_write_) {
|
|
|
|
// Notify writers don't write to memtable to exit.
|
|
|
|
for (Writer* w = last_writer; w != leader;) {
|
|
|
|
Writer* next = w->link_older;
|
|
|
|
w->status = status;
|
|
|
|
if (!w->ShouldWriteToMemtable()) {
|
|
|
|
CompleteFollower(w, write_group);
|
|
|
|
}
|
|
|
|
w = next;
|
|
|
|
}
|
|
|
|
if (!leader->ShouldWriteToMemtable()) {
|
|
|
|
CompleteLeader(write_group);
|
|
|
|
}
|
|
|
|
// Link the ramaining of the group to memtable writer list.
|
|
|
|
if (write_group.size > 0) {
|
|
|
|
if (LinkGroup(write_group, &newest_memtable_writer_)) {
|
|
|
|
// The leader can now be different from current writer.
|
|
|
|
SetState(write_group.leader, STATE_MEMTABLE_WRITER_LEADER);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
// Reset newest_writer_ and wake up the next leader.
|
|
|
|
Writer* newest_writer = last_writer;
|
|
|
|
if (!newest_writer_.compare_exchange_strong(newest_writer, nullptr)) {
|
|
|
|
Writer* next_leader = newest_writer;
|
|
|
|
while (next_leader->link_older != last_writer) {
|
|
|
|
next_leader = next_leader->link_older;
|
|
|
|
assert(next_leader != nullptr);
|
|
|
|
}
|
|
|
|
next_leader->link_older = nullptr;
|
|
|
|
SetState(next_leader, STATE_GROUP_LEADER);
|
|
|
|
}
|
|
|
|
AwaitState(leader, STATE_MEMTABLE_WRITER_LEADER |
|
|
|
|
STATE_PARALLEL_MEMTABLE_WRITER | STATE_COMPLETED,
|
|
|
|
&eabgl_ctx);
|
|
|
|
} else {
|
|
|
|
Writer* head = newest_writer_.load(std::memory_order_acquire);
|
|
|
|
if (head != last_writer ||
|
|
|
|
!newest_writer_.compare_exchange_strong(head, nullptr)) {
|
|
|
|
// Either w wasn't the head during the load(), or it was the head
|
|
|
|
// during the load() but somebody else pushed onto the list before
|
|
|
|
// we did the compare_exchange_strong (causing it to fail). In the
|
|
|
|
// latter case compare_exchange_strong has the effect of re-reading
|
|
|
|
// its first param (head). No need to retry a failing CAS, because
|
|
|
|
// only a departing leader (which we are at the moment) can remove
|
|
|
|
// nodes from the list.
|
|
|
|
assert(head != last_writer);
|
|
|
|
|
|
|
|
// After walking link_older starting from head (if not already done)
|
|
|
|
// we will be able to traverse w->link_newer below. This function
|
|
|
|
// can only be called from an active leader, only a leader can
|
|
|
|
// clear newest_writer_, we didn't, and only a clear newest_writer_
|
|
|
|
// could cause the next leader to start their work without a call
|
|
|
|
// to MarkJoined, so we can definitely conclude that no other leader
|
|
|
|
// work is going on here (with or without db mutex).
|
|
|
|
CreateMissingNewerLinks(head);
|
|
|
|
assert(last_writer->link_newer->link_older == last_writer);
|
|
|
|
last_writer->link_newer->link_older = nullptr;
|
|
|
|
|
|
|
|
// Next leader didn't self-identify, because newest_writer_ wasn't
|
|
|
|
// nullptr when they enqueued (we were definitely enqueued before them
|
|
|
|
// and are still in the list). That means leader handoff occurs when
|
|
|
|
// we call MarkJoined
|
|
|
|
SetState(last_writer->link_newer, STATE_GROUP_LEADER);
|
|
|
|
}
|
|
|
|
// else nobody else was waiting, although there might already be a new
|
|
|
|
// leader now
|
|
|
|
|
|
|
|
while (last_writer != leader) {
|
|
|
|
last_writer->status = status;
|
|
|
|
// we need to read link_older before calling SetState, because as soon
|
|
|
|
// as it is marked committed the other thread's Await may return and
|
|
|
|
// deallocate the Writer.
|
|
|
|
auto next = last_writer->link_older;
|
|
|
|
SetState(last_writer, STATE_COMPLETED);
|
|
|
|
|
|
|
|
last_writer = next;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static WriteThread::AdaptationContext eu_ctx("EnterUnbatched");
|
|
|
|
void WriteThread::EnterUnbatched(Writer* w, InstrumentedMutex* mu) {
|
|
|
|
assert(w != nullptr && w->batch == nullptr);
|
|
|
|
mu->Unlock();
|
|
|
|
bool linked_as_leader = LinkOne(w, &newest_writer_);
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
9 years ago
|
|
|
if (!linked_as_leader) {
|
|
|
|
TEST_SYNC_POINT("WriteThread::EnterUnbatched:Wait");
|
|
|
|
// Last leader will not pick us as a follower since our batch is nullptr
|
|
|
|
AwaitState(w, STATE_GROUP_LEADER, &eu_ctx);
|
|
|
|
}
|
|
|
|
if (enable_pipelined_write_) {
|
|
|
|
WaitForMemTableWriters();
|
|
|
|
}
|
|
|
|
mu->Lock();
|
|
|
|
}
|
|
|
|
|
|
|
|
void WriteThread::ExitUnbatched(Writer* w) {
|
|
|
|
assert(w != nullptr);
|
|
|
|
Writer* newest_writer = w;
|
|
|
|
if (!newest_writer_.compare_exchange_strong(newest_writer, nullptr)) {
|
|
|
|
CreateMissingNewerLinks(newest_writer);
|
|
|
|
Writer* next_leader = w->link_newer;
|
|
|
|
assert(next_leader != nullptr);
|
|
|
|
next_leader->link_older = nullptr;
|
|
|
|
SetState(next_leader, STATE_GROUP_LEADER);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static WriteThread::AdaptationContext wfmw_ctx("WaitForMemTableWriters");
|
|
|
|
void WriteThread::WaitForMemTableWriters() {
|
|
|
|
assert(enable_pipelined_write_);
|
|
|
|
if (newest_memtable_writer_.load() == nullptr) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
Writer w;
|
|
|
|
if (!LinkOne(&w, &newest_memtable_writer_)) {
|
|
|
|
AwaitState(&w, STATE_MEMTABLE_WRITER_LEADER, &wfmw_ctx);
|
|
|
|
}
|
|
|
|
newest_memtable_writer_.store(nullptr);
|
|
|
|
}
|
|
|
|
|
|
|
|
} // namespace rocksdb
|