|
|
|
// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
|
|
|
|
// This source code is licensed under both the GPLv2 (found in the
|
|
|
|
// COPYING file in the root directory) and Apache 2.0 License
|
|
|
|
// (found in the LICENSE.Apache file in the root directory).
|
|
|
|
//
|
|
|
|
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
|
|
|
|
// Use of this source code is governed by a BSD-style license that can be
|
|
|
|
// found in the LICENSE file. See the AUTHORS file for names of contributors.
|
|
|
|
|
|
|
|
#include "db/flush_job.h"
|
|
|
|
|
|
|
|
#ifndef __STDC_FORMAT_MACROS
|
|
|
|
#define __STDC_FORMAT_MACROS
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#include <inttypes.h>
|
|
|
|
|
|
|
|
#include <algorithm>
|
|
|
|
#include <vector>
|
|
|
|
|
|
|
|
#include "db/builder.h"
|
|
|
|
#include "db/db_iter.h"
|
|
|
|
#include "db/dbformat.h"
|
|
|
|
#include "db/event_helpers.h"
|
|
|
|
#include "db/log_reader.h"
|
|
|
|
#include "db/log_writer.h"
|
|
|
|
#include "db/memtable.h"
|
|
|
|
#include "db/memtable_list.h"
|
|
|
|
#include "db/merge_context.h"
|
|
|
|
#include "db/range_tombstone_fragmenter.h"
|
|
|
|
#include "db/version_set.h"
|
|
|
|
#include "file/file_util.h"
|
|
|
|
#include "file/filename.h"
|
|
|
|
#include "logging/event_logger.h"
|
|
|
|
#include "logging/log_buffer.h"
|
|
|
|
#include "logging/logging.h"
|
|
|
|
#include "monitoring/iostats_context_imp.h"
|
|
|
|
#include "monitoring/perf_context_imp.h"
|
|
|
|
#include "monitoring/thread_status_util.h"
|
|
|
|
#include "port/port.h"
|
|
|
|
#include "rocksdb/db.h"
|
|
|
|
#include "rocksdb/env.h"
|
|
|
|
#include "rocksdb/statistics.h"
|
|
|
|
#include "rocksdb/status.h"
|
|
|
|
#include "rocksdb/table.h"
|
|
|
|
#include "table/block_based/block.h"
|
|
|
|
#include "table/block_based/block_based_table_factory.h"
|
|
|
|
#include "table/merging_iterator.h"
|
|
|
|
#include "table/table_builder.h"
|
|
|
|
#include "table/two_level_iterator.h"
|
|
|
|
#include "test_util/sync_point.h"
|
|
|
|
#include "util/coding.h"
|
|
|
|
#include "util/mutexlock.h"
|
|
|
|
#include "util/stop_watch.h"
|
|
|
|
|
|
|
|
namespace rocksdb {
|
|
|
|
|
|
|
|
const char* GetFlushReasonString (FlushReason flush_reason) {
|
|
|
|
switch (flush_reason) {
|
FlushReason improvement
Summary:
Right now flush reason "SuperVersion Change" covers a few different scenarios which is a bit vague. For example, the following db_bench job should trigger "Write Buffer Full"
> $ TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -write_buffer_size=1048576 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304
$ grep 'flush_reason' /dev/shm/dbbench/LOG
...
2018/03/06-17:30:42.543638 7f2773b99700 EVENT_LOG_v1 {"time_micros": 1520386242543634, "job": 192, "event": "flush_started", "num_memtables": 1, "num_entries": 7006, "num_deletes": 0, "memory_usage": 1018024, "flush_reason": "SuperVersion Change"}
2018/03/06-17:30:42.569541 7f2773b99700 EVENT_LOG_v1 {"time_micros": 1520386242569536, "job": 193, "event": "flush_started", "num_memtables": 1, "num_entries": 7006, "num_deletes": 0, "memory_usage": 1018104, "flush_reason": "SuperVersion Change"}
2018/03/06-17:30:42.596396 7f2773b99700 EVENT_LOG_v1 {"time_micros": 1520386242596392, "job": 194, "event": "flush_started", "num_memtables": 1, "num_entries": 7008, "num_deletes": 0, "memory_usage": 1018048, "flush_reason": "SuperVersion Change"}
2018/03/06-17:30:42.622444 7f2773b99700 EVENT_LOG_v1 {"time_micros": 1520386242622440, "job": 195, "event": "flush_started", "num_memtables": 1, "num_entries": 7006, "num_deletes": 0, "memory_usage": 1018104, "flush_reason": "SuperVersion Change"}
With the fix:
> 2018/03/19-14:40:02.341451 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602341444, "job": 98, "event": "flush_started", "num_memtables": 1, "num_entries": 7009, "num_deletes": 0, "memory_usage": 1018008, "flush_reason": "Write Buffer Full"}
2018/03/19-14:40:02.379655 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602379642, "job": 100, "event": "flush_started", "num_memtables": 1, "num_entries": 7006, "num_deletes": 0, "memory_usage": 1018016, "flush_reason": "Write Buffer Full"}
2018/03/19-14:40:02.418479 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602418474, "job": 101, "event": "flush_started", "num_memtables": 1, "num_entries": 7009, "num_deletes": 0, "memory_usage": 1018104, "flush_reason": "Write Buffer Full"}
2018/03/19-14:40:02.455084 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602455079, "job": 102, "event": "flush_started", "num_memtables": 1, "num_entries": 7009, "num_deletes": 0, "memory_usage": 1018048, "flush_reason": "Write Buffer Full"}
2018/03/19-14:40:02.492293 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602492288, "job": 104, "event": "flush_started", "num_memtables": 1, "num_entries": 7007, "num_deletes": 0, "memory_usage": 1018056, "flush_reason": "Write Buffer Full"}
2018/03/19-14:40:02.528720 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602528715, "job": 105, "event": "flush_started", "num_memtables": 1, "num_entries": 7006, "num_deletes": 0, "memory_usage": 1018104, "flush_reason": "Write Buffer Full"}
2018/03/19-14:40:02.566255 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602566238, "job": 107, "event": "flush_started", "num_memtables": 1, "num_entries": 7009, "num_deletes": 0, "memory_usage": 1018112, "flush_reason": "Write Buffer Full"}
Closes https://github.com/facebook/rocksdb/pull/3627
Differential Revision: D7328772
Pulled By: miasantreble
fbshipit-source-id: 67c94065fbdd36930f09930aad0aaa6d2c152bb8
7 years ago
|
|
|
case FlushReason::kOthers:
|
|
|
|
return "Other Reasons";
|
|
|
|
case FlushReason::kGetLiveFiles:
|
|
|
|
return "Get Live Files";
|
|
|
|
case FlushReason::kShutDown:
|
|
|
|
return "Shut down";
|
|
|
|
case FlushReason::kExternalFileIngestion:
|
|
|
|
return "External File Ingestion";
|
|
|
|
case FlushReason::kManualCompaction:
|
|
|
|
return "Manual Compaction";
|
|
|
|
case FlushReason::kWriteBufferManager:
|
|
|
|
return "Write Buffer Manager";
|
|
|
|
case FlushReason::kWriteBufferFull:
|
|
|
|
return "Write Buffer Full";
|
|
|
|
case FlushReason::kTest:
|
|
|
|
return "Test";
|
FlushReason improvement
Summary:
Right now flush reason "SuperVersion Change" covers a few different scenarios which is a bit vague. For example, the following db_bench job should trigger "Write Buffer Full"
> $ TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -write_buffer_size=1048576 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304
$ grep 'flush_reason' /dev/shm/dbbench/LOG
...
2018/03/06-17:30:42.543638 7f2773b99700 EVENT_LOG_v1 {"time_micros": 1520386242543634, "job": 192, "event": "flush_started", "num_memtables": 1, "num_entries": 7006, "num_deletes": 0, "memory_usage": 1018024, "flush_reason": "SuperVersion Change"}
2018/03/06-17:30:42.569541 7f2773b99700 EVENT_LOG_v1 {"time_micros": 1520386242569536, "job": 193, "event": "flush_started", "num_memtables": 1, "num_entries": 7006, "num_deletes": 0, "memory_usage": 1018104, "flush_reason": "SuperVersion Change"}
2018/03/06-17:30:42.596396 7f2773b99700 EVENT_LOG_v1 {"time_micros": 1520386242596392, "job": 194, "event": "flush_started", "num_memtables": 1, "num_entries": 7008, "num_deletes": 0, "memory_usage": 1018048, "flush_reason": "SuperVersion Change"}
2018/03/06-17:30:42.622444 7f2773b99700 EVENT_LOG_v1 {"time_micros": 1520386242622440, "job": 195, "event": "flush_started", "num_memtables": 1, "num_entries": 7006, "num_deletes": 0, "memory_usage": 1018104, "flush_reason": "SuperVersion Change"}
With the fix:
> 2018/03/19-14:40:02.341451 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602341444, "job": 98, "event": "flush_started", "num_memtables": 1, "num_entries": 7009, "num_deletes": 0, "memory_usage": 1018008, "flush_reason": "Write Buffer Full"}
2018/03/19-14:40:02.379655 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602379642, "job": 100, "event": "flush_started", "num_memtables": 1, "num_entries": 7006, "num_deletes": 0, "memory_usage": 1018016, "flush_reason": "Write Buffer Full"}
2018/03/19-14:40:02.418479 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602418474, "job": 101, "event": "flush_started", "num_memtables": 1, "num_entries": 7009, "num_deletes": 0, "memory_usage": 1018104, "flush_reason": "Write Buffer Full"}
2018/03/19-14:40:02.455084 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602455079, "job": 102, "event": "flush_started", "num_memtables": 1, "num_entries": 7009, "num_deletes": 0, "memory_usage": 1018048, "flush_reason": "Write Buffer Full"}
2018/03/19-14:40:02.492293 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602492288, "job": 104, "event": "flush_started", "num_memtables": 1, "num_entries": 7007, "num_deletes": 0, "memory_usage": 1018056, "flush_reason": "Write Buffer Full"}
2018/03/19-14:40:02.528720 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602528715, "job": 105, "event": "flush_started", "num_memtables": 1, "num_entries": 7006, "num_deletes": 0, "memory_usage": 1018104, "flush_reason": "Write Buffer Full"}
2018/03/19-14:40:02.566255 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602566238, "job": 107, "event": "flush_started", "num_memtables": 1, "num_entries": 7009, "num_deletes": 0, "memory_usage": 1018112, "flush_reason": "Write Buffer Full"}
Closes https://github.com/facebook/rocksdb/pull/3627
Differential Revision: D7328772
Pulled By: miasantreble
fbshipit-source-id: 67c94065fbdd36930f09930aad0aaa6d2c152bb8
7 years ago
|
|
|
case FlushReason::kDeleteFiles:
|
|
|
|
return "Delete Files";
|
|
|
|
case FlushReason::kAutoCompaction:
|
|
|
|
return "Auto Compaction";
|
|
|
|
case FlushReason::kManualFlush:
|
|
|
|
return "Manual Flush";
|
Auto recovery from out of space errors (#4164)
Summary:
This commit implements automatic recovery from a Status::NoSpace() error
during background operations such as write callback, flush and
compaction. The broad design is as follows -
1. Compaction errors are treated as soft errors and don't put the
database in read-only mode. A compaction is delayed until enough free
disk space is available to accomodate the compaction outputs, which is
estimated based on the input size. This means that users can continue to
write, and we rely on the WriteController to delay or stop writes if the
compaction debt becomes too high due to persistent low disk space
condition
2. Errors during write callback and flush are treated as hard errors,
i.e the database is put in read-only mode and goes back to read-write
only fater certain recovery actions are taken.
3. Both types of recovery rely on the SstFileManagerImpl to poll for
sufficient disk space. We assume that there is a 1-1 mapping between an
SFM and the underlying OS storage container. For cases where multiple
DBs are hosted on a single storage container, the user is expected to
allocate a single SFM instance and use the same one for all the DBs. If
no SFM is specified by the user, DBImpl::Open() will allocate one, but
this will be one per DB and each DB will recover independently. The
recovery implemented by SFM is as follows -
a) On the first occurance of an out of space error during compaction,
subsequent
compactions will be delayed until the disk free space check indicates
enough available space. The required space is computed as the sum of
input sizes.
b) The free space check requirement will be removed once the amount of
free space is greater than the size reserved by in progress
compactions when the first error occured
c) If the out of space error is a hard error, a background thread in
SFM will poll for sufficient headroom before triggering the recovery
of the database and putting it in write-only mode. The headroom is
calculated as the sum of the write_buffer_size of all the DB instances
associated with the SFM
4. EventListener callbacks will be called at the start and completion of
automatic recovery. Users can disable the auto recov ery in the start
callback, and later initiate it manually by calling DB::Resume()
Todo:
1. More extensive testing
2. Add disk full condition to db_stress (follow-on PR)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4164
Differential Revision: D9846378
Pulled By: anand1976
fbshipit-source-id: 80ea875dbd7f00205e19c82215ff6e37da10da4a
6 years ago
|
|
|
case FlushReason::kErrorRecovery:
|
|
|
|
return "Error Recovery";
|
|
|
|
default:
|
|
|
|
return "Invalid";
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
FlushJob::FlushJob(const std::string& dbname, ColumnFamilyData* cfd,
|
|
|
|
const ImmutableDBOptions& db_options,
|
|
|
|
const MutableCFOptions& mutable_cf_options,
|
|
|
|
const uint64_t* max_memtable_id,
|
|
|
|
const EnvOptions& env_options, VersionSet* versions,
|
|
|
|
InstrumentedMutex* db_mutex,
|
|
|
|
std::atomic<bool>* shutting_down,
|
|
|
|
std::vector<SequenceNumber> existing_snapshots,
|
Use SST files for Transaction conflict detection
Summary:
Currently, transactions can fail even if there is no actual write conflict. This is due to relying on only the memtables to check for write-conflicts. Users have to tune memtable settings to try to avoid this, but it's hard to figure out exactly how to tune these settings.
With this diff, TransactionDB will use both memtables and SST files to determine if there are any write conflicts. This relies on the fact that BlockBasedTable stores sequence numbers for all writes that happen after any open snapshot. Also, D50295 is needed to prevent SingleDelete from disappearing writes (the TODOs in this test code will be fixed once the other diff is approved and merged).
Note that Optimistic transactions will still rely on tuning memtable settings as we do not want to read from SST while on the write thread. Also, memtable settings can still be used to reduce how often TransactionDB needs to read SST files.
Test Plan: unit tests, db bench
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb, yoshinorim
Differential Revision: https://reviews.facebook.net/D50475
9 years ago
|
|
|
SequenceNumber earliest_write_conflict_snapshot,
|
|
|
|
SnapshotChecker* snapshot_checker, JobContext* job_context,
|
|
|
|
LogBuffer* log_buffer, Directory* db_directory,
|
|
|
|
Directory* output_file_directory,
|
EventLogger
Summary:
Here's my proposal for making our LOGs easier to read by machines.
The idea is to dump all events as JSON objects. JSON is easy to read by humans, but more importantly, it's easy to read by machines. That way, we can parse this, load into SQLite/mongo and then query or visualize.
I started with table_create and table_delete events, but if everybody agrees, I'll continue by adding more events (flush/compaction/etc etc)
Test Plan:
Ran db_bench. Observed:
2015/01/15-14:13:25.788019 1105ef000 EVENT_LOG_v1 {"time_micros": 1421360005788015, "event": "table_file_creation", "file_number": 12, "file_size": 1909699}
2015/01/15-14:13:25.956500 110740000 EVENT_LOG_v1 {"time_micros": 1421360005956498, "event": "table_file_deletion", "file_number": 12}
Reviewers: yhchiang, rven, dhruba, MarkCallaghan, lgalanis, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31647
10 years ago
|
|
|
CompressionType output_compression, Statistics* stats,
|
|
|
|
EventLogger* event_logger, bool measure_io_stats,
|
|
|
|
const bool sync_output_directory, const bool write_manifest,
|
|
|
|
Env::Priority thread_pri)
|
|
|
|
: dbname_(dbname),
|
|
|
|
cfd_(cfd),
|
|
|
|
db_options_(db_options),
|
|
|
|
mutable_cf_options_(mutable_cf_options),
|
|
|
|
max_memtable_id_(max_memtable_id),
|
|
|
|
env_options_(env_options),
|
|
|
|
versions_(versions),
|
|
|
|
db_mutex_(db_mutex),
|
|
|
|
shutting_down_(shutting_down),
|
|
|
|
existing_snapshots_(std::move(existing_snapshots)),
|
Use SST files for Transaction conflict detection
Summary:
Currently, transactions can fail even if there is no actual write conflict. This is due to relying on only the memtables to check for write-conflicts. Users have to tune memtable settings to try to avoid this, but it's hard to figure out exactly how to tune these settings.
With this diff, TransactionDB will use both memtables and SST files to determine if there are any write conflicts. This relies on the fact that BlockBasedTable stores sequence numbers for all writes that happen after any open snapshot. Also, D50295 is needed to prevent SingleDelete from disappearing writes (the TODOs in this test code will be fixed once the other diff is approved and merged).
Note that Optimistic transactions will still rely on tuning memtable settings as we do not want to read from SST while on the write thread. Also, memtable settings can still be used to reduce how often TransactionDB needs to read SST files.
Test Plan: unit tests, db bench
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb, yoshinorim
Differential Revision: https://reviews.facebook.net/D50475
9 years ago
|
|
|
earliest_write_conflict_snapshot_(earliest_write_conflict_snapshot),
|
|
|
|
snapshot_checker_(snapshot_checker),
|
|
|
|
job_context_(job_context),
|
|
|
|
log_buffer_(log_buffer),
|
|
|
|
db_directory_(db_directory),
|
|
|
|
output_file_directory_(output_file_directory),
|
|
|
|
output_compression_(output_compression),
|
EventLogger
Summary:
Here's my proposal for making our LOGs easier to read by machines.
The idea is to dump all events as JSON objects. JSON is easy to read by humans, but more importantly, it's easy to read by machines. That way, we can parse this, load into SQLite/mongo and then query or visualize.
I started with table_create and table_delete events, but if everybody agrees, I'll continue by adding more events (flush/compaction/etc etc)
Test Plan:
Ran db_bench. Observed:
2015/01/15-14:13:25.788019 1105ef000 EVENT_LOG_v1 {"time_micros": 1421360005788015, "event": "table_file_creation", "file_number": 12, "file_size": 1909699}
2015/01/15-14:13:25.956500 110740000 EVENT_LOG_v1 {"time_micros": 1421360005956498, "event": "table_file_deletion", "file_number": 12}
Reviewers: yhchiang, rven, dhruba, MarkCallaghan, lgalanis, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31647
10 years ago
|
|
|
stats_(stats),
|
|
|
|
event_logger_(event_logger),
|
|
|
|
measure_io_stats_(measure_io_stats),
|
|
|
|
sync_output_directory_(sync_output_directory),
|
|
|
|
write_manifest_(write_manifest),
|
|
|
|
edit_(nullptr),
|
|
|
|
base_(nullptr),
|
|
|
|
pick_memtable_called(false),
|
|
|
|
thread_pri_(thread_pri) {
|
|
|
|
// Update the thread status to indicate flush.
|
|
|
|
ReportStartedFlush();
|
|
|
|
TEST_SYNC_POINT("FlushJob::FlushJob()");
|
|
|
|
}
|
|
|
|
|
|
|
|
FlushJob::~FlushJob() {
|
|
|
|
ThreadStatusUtil::ResetThreadStatus();
|
|
|
|
}
|
|
|
|
|
|
|
|
void FlushJob::ReportStartedFlush() {
|
|
|
|
ThreadStatusUtil::SetColumnFamily(cfd_, cfd_->ioptions()->env,
|
|
|
|
db_options_.enable_thread_tracking);
|
|
|
|
ThreadStatusUtil::SetThreadOperation(ThreadStatus::OP_FLUSH);
|
|
|
|
ThreadStatusUtil::SetThreadOperationProperty(
|
|
|
|
ThreadStatus::COMPACTION_JOB_ID,
|
|
|
|
job_context_->job_id);
|
|
|
|
IOSTATS_RESET(bytes_written);
|
|
|
|
}
|
|
|
|
|
|
|
|
void FlushJob::ReportFlushInputSize(const autovector<MemTable*>& mems) {
|
|
|
|
uint64_t input_size = 0;
|
|
|
|
for (auto* mem : mems) {
|
|
|
|
input_size += mem->ApproximateMemoryUsage();
|
|
|
|
}
|
|
|
|
ThreadStatusUtil::IncreaseThreadOperationProperty(
|
|
|
|
ThreadStatus::FLUSH_BYTES_MEMTABLES,
|
|
|
|
input_size);
|
|
|
|
}
|
|
|
|
|
|
|
|
void FlushJob::RecordFlushIOStats() {
|
|
|
|
RecordTick(stats_, FLUSH_WRITE_BYTES, IOSTATS(bytes_written));
|
|
|
|
ThreadStatusUtil::IncreaseThreadOperationProperty(
|
|
|
|
ThreadStatus::FLUSH_BYTES_WRITTEN, IOSTATS(bytes_written));
|
|
|
|
IOSTATS_RESET(bytes_written);
|
|
|
|
}
|
|
|
|
|
|
|
|
void FlushJob::PickMemTable() {
|
|
|
|
db_mutex_->AssertHeld();
|
|
|
|
assert(!pick_memtable_called);
|
|
|
|
pick_memtable_called = true;
|
|
|
|
// Save the contents of the earliest memtable as a new Table
|
|
|
|
cfd_->imm()->PickMemtablesToFlush(max_memtable_id_, &mems_);
|
|
|
|
if (mems_.empty()) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
ReportFlushInputSize(mems_);
|
|
|
|
|
|
|
|
// entries mems are (implicitly) sorted in ascending order by their created
|
|
|
|
// time. We will use the first memtable's `edit` to keep the meta info for
|
|
|
|
// this flush.
|
|
|
|
MemTable* m = mems_[0];
|
|
|
|
edit_ = m->GetEdits();
|
|
|
|
edit_->SetPrevLogNumber(0);
|
|
|
|
// SetLogNumber(log_num) indicates logs with number smaller than log_num
|
|
|
|
// will no longer be picked up for recovery.
|
|
|
|
edit_->SetLogNumber(mems_.back()->GetNextLogNumber());
|
|
|
|
edit_->SetColumnFamily(cfd_->GetID());
|
|
|
|
|
|
|
|
// path 0 for level 0 file.
|
|
|
|
meta_.fd = FileDescriptor(versions_->NewFileNumber(), 0, 0);
|
|
|
|
|
|
|
|
base_ = cfd_->current();
|
|
|
|
base_->Ref(); // it is likely that we do not need this reference
|
|
|
|
}
|
|
|
|
|
Skip deleted WALs during recovery
Summary:
This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction)
This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2.
Closes https://github.com/facebook/rocksdb/pull/3765
Differential Revision: D7747618
Pulled By: siying
fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
7 years ago
|
|
|
Status FlushJob::Run(LogsWithPrepTracker* prep_tracker,
|
|
|
|
FileMetaData* file_meta) {
|
|
|
|
TEST_SYNC_POINT("FlushJob::Start");
|
|
|
|
db_mutex_->AssertHeld();
|
|
|
|
assert(pick_memtable_called);
|
|
|
|
AutoThreadOperationStageUpdater stage_run(
|
|
|
|
ThreadStatus::STAGE_FLUSH_RUN);
|
|
|
|
if (mems_.empty()) {
|
|
|
|
ROCKS_LOG_BUFFER(log_buffer_, "[%s] Nothing in memtable to flush",
|
|
|
|
cfd_->GetName().c_str());
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
|
|
|
// I/O measurement variables
|
|
|
|
PerfLevel prev_perf_level = PerfLevel::kEnableTime;
|
|
|
|
uint64_t prev_write_nanos = 0;
|
|
|
|
uint64_t prev_fsync_nanos = 0;
|
|
|
|
uint64_t prev_range_sync_nanos = 0;
|
|
|
|
uint64_t prev_prepare_write_nanos = 0;
|
|
|
|
uint64_t prev_cpu_write_nanos = 0;
|
|
|
|
uint64_t prev_cpu_read_nanos = 0;
|
|
|
|
if (measure_io_stats_) {
|
|
|
|
prev_perf_level = GetPerfLevel();
|
|
|
|
SetPerfLevel(PerfLevel::kEnableTime);
|
|
|
|
prev_write_nanos = IOSTATS(write_nanos);
|
|
|
|
prev_fsync_nanos = IOSTATS(fsync_nanos);
|
|
|
|
prev_range_sync_nanos = IOSTATS(range_sync_nanos);
|
|
|
|
prev_prepare_write_nanos = IOSTATS(prepare_write_nanos);
|
|
|
|
prev_cpu_write_nanos = IOSTATS(cpu_write_nanos);
|
|
|
|
prev_cpu_read_nanos = IOSTATS(cpu_read_nanos);
|
|
|
|
}
|
|
|
|
|
|
|
|
// This will release and re-acquire the mutex.
|
|
|
|
Status s = WriteLevel0Table();
|
|
|
|
|
|
|
|
if (s.ok() && cfd_->IsDropped()) {
|
|
|
|
s = Status::ColumnFamilyDropped("Column family dropped during compaction");
|
|
|
|
}
|
|
|
|
if ((s.ok() || s.IsColumnFamilyDropped()) &&
|
|
|
|
shutting_down_->load(std::memory_order_acquire)) {
|
|
|
|
s = Status::ShutdownInProgress("Database shutdown");
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!s.ok()) {
|
|
|
|
cfd_->imm()->RollbackMemtableFlush(mems_, meta_.fd.GetNumber());
|
|
|
|
} else if (write_manifest_) {
|
LogAndApply() should fail if the column family has been dropped
Summary:
This patch finally fixes the ColumnFamilyTest.ReadDroppedColumnFamily test. The test has been failing very sporadically and it was hard to repro. However, I managed to write a new tests that reproes the failure deterministically.
Here's what happens:
1. We start the flush for the column family
2. We check if the column family was dropped here: https://github.com/facebook/rocksdb/blob/a3fc49bfddcdb1ff29409aacd06c04df56c7a1d7/db/flush_job.cc#L149
3. This check goes through, ends up in InstallMemtableFlushResults() and it goes into LogAndApply()
4. At about this time, we start dropping the column family. Dropping the column family process gets to LogAndApply() at about the same time as LogAndApply() from flush process
5. Drop column family goes through LogAndApply() first, marking the column family as dropped.
6. Flush process gets woken up and gets a chance to write to the MANIFEST. However, this is where it gets stuck: https://github.com/facebook/rocksdb/blob/a3fc49bfddcdb1ff29409aacd06c04df56c7a1d7/db/version_set.cc#L1975
7. We see that the column family was dropped, so there is no need to write to the MANIFEST. We return OK.
8. Flush gets OK back from LogAndApply() and it deletes the memtable, thinking that the data is now safely persisted to sst file.
The fix is pretty simple. Instead of OK, we return ShutdownInProgress. This is not really true, but we have been using this status code to also mean "this operation was canceled because the column family has been dropped".
The fix is only one LOC. All other code is related to tests. I added a new test that reproes the failure. I also moved SleepingBackgroundTask to util/testutil.h (because I needed it in column_family_test for my new test). There's plenty of other places where we reimplement SleepingBackgroundTask, but I'll address that in a separate commit.
Test Plan:
1. new test
2. make check
3. Make sure the ColumnFamilyTest.ReadDroppedColumnFamily doesn't fail on Travis: https://travis-ci.org/facebook/rocksdb/jobs/79952386
Reviewers: yhchiang, anthony, IslamAbdelRahman, kradhakrishnan, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46773
9 years ago
|
|
|
TEST_SYNC_POINT("FlushJob::InstallResults");
|
|
|
|
// Replace immutable memtable with the generated Table
|
|
|
|
s = cfd_->imm()->TryInstallMemtableFlushResults(
|
Skip deleted WALs during recovery
Summary:
This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction)
This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2.
Closes https://github.com/facebook/rocksdb/pull/3765
Differential Revision: D7747618
Pulled By: siying
fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
7 years ago
|
|
|
cfd_, mutable_cf_options_, mems_, prep_tracker, versions_, db_mutex_,
|
|
|
|
meta_.fd.GetNumber(), &job_context_->memtables_to_free, db_directory_,
|
|
|
|
log_buffer_);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (s.ok() && file_meta != nullptr) {
|
|
|
|
*file_meta = meta_;
|
CompactFiles, EventListener and GetDatabaseMetaData
Summary:
This diff adds three sets of APIs to RocksDB.
= GetColumnFamilyMetaData =
* This APIs allow users to obtain the current state of a RocksDB instance on one column family.
* See GetColumnFamilyMetaData in include/rocksdb/db.h
= EventListener =
* A virtual class that allows users to implement a set of
call-back functions which will be called when specific
events of a RocksDB instance happens.
* To register EventListener, simply insert an EventListener to ColumnFamilyOptions::listeners
= CompactFiles =
* CompactFiles API inputs a set of file numbers and an output level, and RocksDB
will try to compact those files into the specified level.
= Example =
* Example code can be found in example/compact_files_example.cc, which implements
a simple external compactor using EventListener, GetColumnFamilyMetaData, and
CompactFiles API.
Test Plan:
listener_test
compactor_test
example/compact_files_example
export ROCKSDB_TESTS=CompactFiles
db_test
export ROCKSDB_TESTS=MetaData
db_test
Reviewers: ljin, igor, rven, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D24705
10 years ago
|
|
|
}
|
|
|
|
RecordFlushIOStats();
|
|
|
|
|
Include bunch of more events into EventLogger
Summary:
Added these events:
* Recovery start, finish and also when recovery creates a file
* Trivial move
* Compaction start, finish and when compaction creates a file
* Flush start, finish
Also includes small fix to EventLogger
Also added option ROCKSDB_PRINT_EVENTS_TO_STDOUT which is useful when we debug things. I've spent far too much time chasing LOG files.
Still didn't get sst table properties in JSON. They are written very deeply into the stack. I'll address in separate diff.
TODO:
* Write specification. Let's first use this for a while and figure out what's good data to put here, too. After that we'll write spec
* Write tools that parse and analyze LOGs. This can be in python or go. Good intern task.
Test Plan: Ran db_bench with ROCKSDB_PRINT_EVENTS_TO_STDOUT. Here's the output: https://phabricator.fb.com/P19811976
Reviewers: sdong, yhchiang, rven, MarkCallaghan, kradhakrishnan, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37521
10 years ago
|
|
|
auto stream = event_logger_->LogToBuffer(log_buffer_);
|
|
|
|
stream << "job" << job_context_->job_id << "event"
|
|
|
|
<< "flush_finished";
|
|
|
|
stream << "output_compression"
|
|
|
|
<< CompressionTypeToString(output_compression_);
|
Include bunch of more events into EventLogger
Summary:
Added these events:
* Recovery start, finish and also when recovery creates a file
* Trivial move
* Compaction start, finish and when compaction creates a file
* Flush start, finish
Also includes small fix to EventLogger
Also added option ROCKSDB_PRINT_EVENTS_TO_STDOUT which is useful when we debug things. I've spent far too much time chasing LOG files.
Still didn't get sst table properties in JSON. They are written very deeply into the stack. I'll address in separate diff.
TODO:
* Write specification. Let's first use this for a while and figure out what's good data to put here, too. After that we'll write spec
* Write tools that parse and analyze LOGs. This can be in python or go. Good intern task.
Test Plan: Ran db_bench with ROCKSDB_PRINT_EVENTS_TO_STDOUT. Here's the output: https://phabricator.fb.com/P19811976
Reviewers: sdong, yhchiang, rven, MarkCallaghan, kradhakrishnan, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37521
10 years ago
|
|
|
stream << "lsm_state";
|
|
|
|
stream.StartArray();
|
|
|
|
auto vstorage = cfd_->current()->storage_info();
|
|
|
|
for (int level = 0; level < vstorage->num_levels(); ++level) {
|
|
|
|
stream << vstorage->NumLevelFiles(level);
|
|
|
|
}
|
|
|
|
stream.EndArray();
|
|
|
|
stream << "immutable_memtables" << cfd_->imm()->NumNotFlushed();
|
Include bunch of more events into EventLogger
Summary:
Added these events:
* Recovery start, finish and also when recovery creates a file
* Trivial move
* Compaction start, finish and when compaction creates a file
* Flush start, finish
Also includes small fix to EventLogger
Also added option ROCKSDB_PRINT_EVENTS_TO_STDOUT which is useful when we debug things. I've spent far too much time chasing LOG files.
Still didn't get sst table properties in JSON. They are written very deeply into the stack. I'll address in separate diff.
TODO:
* Write specification. Let's first use this for a while and figure out what's good data to put here, too. After that we'll write spec
* Write tools that parse and analyze LOGs. This can be in python or go. Good intern task.
Test Plan: Ran db_bench with ROCKSDB_PRINT_EVENTS_TO_STDOUT. Here's the output: https://phabricator.fb.com/P19811976
Reviewers: sdong, yhchiang, rven, MarkCallaghan, kradhakrishnan, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37521
10 years ago
|
|
|
|
|
|
|
if (measure_io_stats_) {
|
|
|
|
if (prev_perf_level != PerfLevel::kEnableTime) {
|
|
|
|
SetPerfLevel(prev_perf_level);
|
|
|
|
}
|
|
|
|
stream << "file_write_nanos" << (IOSTATS(write_nanos) - prev_write_nanos);
|
|
|
|
stream << "file_range_sync_nanos"
|
|
|
|
<< (IOSTATS(range_sync_nanos) - prev_range_sync_nanos);
|
|
|
|
stream << "file_fsync_nanos" << (IOSTATS(fsync_nanos) - prev_fsync_nanos);
|
|
|
|
stream << "file_prepare_write_nanos"
|
|
|
|
<< (IOSTATS(prepare_write_nanos) - prev_prepare_write_nanos);
|
|
|
|
stream << "file_cpu_write_nanos"
|
|
|
|
<< (IOSTATS(cpu_write_nanos) - prev_cpu_write_nanos);
|
|
|
|
stream << "file_cpu_read_nanos"
|
|
|
|
<< (IOSTATS(cpu_read_nanos) - prev_cpu_read_nanos);
|
|
|
|
}
|
|
|
|
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
void FlushJob::Cancel() {
|
|
|
|
db_mutex_->AssertHeld();
|
|
|
|
assert(base_ != nullptr);
|
|
|
|
base_->Unref();
|
|
|
|
}
|
|
|
|
|
|
|
|
Status FlushJob::WriteLevel0Table() {
|
|
|
|
AutoThreadOperationStageUpdater stage_updater(
|
|
|
|
ThreadStatus::STAGE_FLUSH_WRITE_L0);
|
|
|
|
db_mutex_->AssertHeld();
|
|
|
|
const uint64_t start_micros = db_options_.env->NowMicros();
|
|
|
|
const uint64_t start_cpu_micros = db_options_.env->NowCPUNanos() / 1000;
|
|
|
|
Status s;
|
|
|
|
{
|
|
|
|
auto write_hint = cfd_->CalculateSSTWriteHint(0);
|
|
|
|
db_mutex_->Unlock();
|
|
|
|
if (log_buffer_) {
|
|
|
|
log_buffer_->FlushBufferToLog();
|
|
|
|
}
|
|
|
|
// memtables and range_del_iters store internal iterators over each data
|
|
|
|
// memtable and its associated range deletion memtable, respectively, at
|
|
|
|
// corresponding indexes.
|
|
|
|
std::vector<InternalIterator*> memtables;
|
|
|
|
std::vector<std::unique_ptr<FragmentedRangeTombstoneIterator>>
|
|
|
|
range_del_iters;
|
|
|
|
ReadOptions ro;
|
|
|
|
ro.total_order_seek = true;
|
|
|
|
Arena arena;
|
Include bunch of more events into EventLogger
Summary:
Added these events:
* Recovery start, finish and also when recovery creates a file
* Trivial move
* Compaction start, finish and when compaction creates a file
* Flush start, finish
Also includes small fix to EventLogger
Also added option ROCKSDB_PRINT_EVENTS_TO_STDOUT which is useful when we debug things. I've spent far too much time chasing LOG files.
Still didn't get sst table properties in JSON. They are written very deeply into the stack. I'll address in separate diff.
TODO:
* Write specification. Let's first use this for a while and figure out what's good data to put here, too. After that we'll write spec
* Write tools that parse and analyze LOGs. This can be in python or go. Good intern task.
Test Plan: Ran db_bench with ROCKSDB_PRINT_EVENTS_TO_STDOUT. Here's the output: https://phabricator.fb.com/P19811976
Reviewers: sdong, yhchiang, rven, MarkCallaghan, kradhakrishnan, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37521
10 years ago
|
|
|
uint64_t total_num_entries = 0, total_num_deletes = 0;
|
|
|
|
uint64_t total_data_size = 0;
|
Include bunch of more events into EventLogger
Summary:
Added these events:
* Recovery start, finish and also when recovery creates a file
* Trivial move
* Compaction start, finish and when compaction creates a file
* Flush start, finish
Also includes small fix to EventLogger
Also added option ROCKSDB_PRINT_EVENTS_TO_STDOUT which is useful when we debug things. I've spent far too much time chasing LOG files.
Still didn't get sst table properties in JSON. They are written very deeply into the stack. I'll address in separate diff.
TODO:
* Write specification. Let's first use this for a while and figure out what's good data to put here, too. After that we'll write spec
* Write tools that parse and analyze LOGs. This can be in python or go. Good intern task.
Test Plan: Ran db_bench with ROCKSDB_PRINT_EVENTS_TO_STDOUT. Here's the output: https://phabricator.fb.com/P19811976
Reviewers: sdong, yhchiang, rven, MarkCallaghan, kradhakrishnan, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37521
10 years ago
|
|
|
size_t total_memory_usage = 0;
|
|
|
|
for (MemTable* m : mems_) {
|
|
|
|
ROCKS_LOG_INFO(
|
|
|
|
db_options_.info_log,
|
|
|
|
"[%s] [JOB %d] Flushing memtable with next log file: %" PRIu64 "\n",
|
|
|
|
cfd_->GetName().c_str(), job_context_->job_id, m->GetNextLogNumber());
|
|
|
|
memtables.push_back(m->NewIterator(ro, &arena));
|
|
|
|
auto* range_del_iter =
|
|
|
|
m->NewRangeTombstoneIterator(ro, kMaxSequenceNumber);
|
|
|
|
if (range_del_iter != nullptr) {
|
|
|
|
range_del_iters.emplace_back(range_del_iter);
|
|
|
|
}
|
Include bunch of more events into EventLogger
Summary:
Added these events:
* Recovery start, finish and also when recovery creates a file
* Trivial move
* Compaction start, finish and when compaction creates a file
* Flush start, finish
Also includes small fix to EventLogger
Also added option ROCKSDB_PRINT_EVENTS_TO_STDOUT which is useful when we debug things. I've spent far too much time chasing LOG files.
Still didn't get sst table properties in JSON. They are written very deeply into the stack. I'll address in separate diff.
TODO:
* Write specification. Let's first use this for a while and figure out what's good data to put here, too. After that we'll write spec
* Write tools that parse and analyze LOGs. This can be in python or go. Good intern task.
Test Plan: Ran db_bench with ROCKSDB_PRINT_EVENTS_TO_STDOUT. Here's the output: https://phabricator.fb.com/P19811976
Reviewers: sdong, yhchiang, rven, MarkCallaghan, kradhakrishnan, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37521
10 years ago
|
|
|
total_num_entries += m->num_entries();
|
|
|
|
total_num_deletes += m->num_deletes();
|
|
|
|
total_data_size += m->get_data_size();
|
Include bunch of more events into EventLogger
Summary:
Added these events:
* Recovery start, finish and also when recovery creates a file
* Trivial move
* Compaction start, finish and when compaction creates a file
* Flush start, finish
Also includes small fix to EventLogger
Also added option ROCKSDB_PRINT_EVENTS_TO_STDOUT which is useful when we debug things. I've spent far too much time chasing LOG files.
Still didn't get sst table properties in JSON. They are written very deeply into the stack. I'll address in separate diff.
TODO:
* Write specification. Let's first use this for a while and figure out what's good data to put here, too. After that we'll write spec
* Write tools that parse and analyze LOGs. This can be in python or go. Good intern task.
Test Plan: Ran db_bench with ROCKSDB_PRINT_EVENTS_TO_STDOUT. Here's the output: https://phabricator.fb.com/P19811976
Reviewers: sdong, yhchiang, rven, MarkCallaghan, kradhakrishnan, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37521
10 years ago
|
|
|
total_memory_usage += m->ApproximateMemoryUsage();
|
|
|
|
}
|
Include bunch of more events into EventLogger
Summary:
Added these events:
* Recovery start, finish and also when recovery creates a file
* Trivial move
* Compaction start, finish and when compaction creates a file
* Flush start, finish
Also includes small fix to EventLogger
Also added option ROCKSDB_PRINT_EVENTS_TO_STDOUT which is useful when we debug things. I've spent far too much time chasing LOG files.
Still didn't get sst table properties in JSON. They are written very deeply into the stack. I'll address in separate diff.
TODO:
* Write specification. Let's first use this for a while and figure out what's good data to put here, too. After that we'll write spec
* Write tools that parse and analyze LOGs. This can be in python or go. Good intern task.
Test Plan: Ran db_bench with ROCKSDB_PRINT_EVENTS_TO_STDOUT. Here's the output: https://phabricator.fb.com/P19811976
Reviewers: sdong, yhchiang, rven, MarkCallaghan, kradhakrishnan, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37521
10 years ago
|
|
|
|
|
|
|
event_logger_->Log() << "job" << job_context_->job_id << "event"
|
|
|
|
<< "flush_started"
|
|
|
|
<< "num_memtables" << mems_.size() << "num_entries"
|
|
|
|
<< total_num_entries << "num_deletes"
|
|
|
|
<< total_num_deletes << "total_data_size"
|
|
|
|
<< total_data_size << "memory_usage"
|
|
|
|
<< total_memory_usage << "flush_reason"
|
|
|
|
<< GetFlushReasonString(cfd_->GetFlushReason());
|
Fixing race condition in DBTest.DynamicMemtableOptions
Summary:
This patch fixes a race condition in DBTEst.DynamicMemtableOptions. In rare cases,
it was possible that the main thread would fill up both memtables before the flush
job acquired its work. Then, the flush job was flushing both memtables together,
producing only one L0 file while the test expected two. Now, the test waits for
flushes to finish earlier, to make sure that the memtables are flushed in separate
flush jobs.
Test Plan:
Insert "usleep(10000);" after "IOSTATS_SET_THREAD_POOL_ID(Env::Priority::HIGH);" in BGWorkFlush()
to make the issue more likely. Then test with:
make db_test && time while ./db_test --gtest_filter=*DynamicMemtableOptions; do true; done
Reviewers: rven, sdong, yhchiang, anthony, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45429
9 years ago
|
|
|
|
|
|
|
{
|
|
|
|
ScopedArenaIterator iter(
|
|
|
|
NewMergingIterator(&cfd_->internal_comparator(), &memtables[0],
|
|
|
|
static_cast<int>(memtables.size()), &arena));
|
|
|
|
ROCKS_LOG_INFO(db_options_.info_log,
|
|
|
|
"[%s] [JOB %d] Level-0 flush table #%" PRIu64 ": started",
|
|
|
|
cfd_->GetName().c_str(), job_context_->job_id,
|
|
|
|
meta_.fd.GetNumber());
|
|
|
|
|
|
|
|
TEST_SYNC_POINT_CALLBACK("FlushJob::WriteLevel0Table:output_compression",
|
|
|
|
&output_compression_);
|
|
|
|
int64_t _current_time = 0;
|
|
|
|
auto status = db_options_.env->GetCurrentTime(&_current_time);
|
|
|
|
// Safe to proceed even if GetCurrentTime fails. So, log and proceed.
|
|
|
|
if (!status.ok()) {
|
|
|
|
ROCKS_LOG_WARN(
|
|
|
|
db_options_.info_log,
|
|
|
|
"Failed to get current time to populate creation_time property. "
|
|
|
|
"Status: %s",
|
|
|
|
status.ToString().c_str());
|
|
|
|
}
|
|
|
|
const uint64_t current_time = static_cast<uint64_t>(_current_time);
|
|
|
|
|
|
|
|
uint64_t oldest_key_time =
|
|
|
|
mems_.front()->ApproximateOldestKeyTime();
|
|
|
|
|
Adding pin_l0_filter_and_index_blocks_in_cache feature and related fixes.
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
Test Plan:
'export TEST_TMPDIR=/dev/shm/ && DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32' is OK.
I didn't run the Java tests, I don't have Java set up on my devserver.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56133
9 years ago
|
|
|
s = BuildTable(
|
|
|
|
dbname_, db_options_.env, *cfd_->ioptions(), mutable_cf_options_,
|
|
|
|
env_options_, cfd_->table_cache(), iter.get(),
|
|
|
|
std::move(range_del_iters), &meta_, cfd_->internal_comparator(),
|
|
|
|
cfd_->int_tbl_prop_collector_factories(), cfd_->GetID(),
|
|
|
|
cfd_->GetName(), existing_snapshots_,
|
|
|
|
earliest_write_conflict_snapshot_, snapshot_checker_,
|
|
|
|
output_compression_, mutable_cf_options_.sample_for_compression,
|
|
|
|
cfd_->ioptions()->compression_opts,
|
Adding pin_l0_filter_and_index_blocks_in_cache feature and related fixes.
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
Test Plan:
'export TEST_TMPDIR=/dev/shm/ && DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32' is OK.
I didn't run the Java tests, I don't have Java set up on my devserver.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56133
9 years ago
|
|
|
mutable_cf_options_.paranoid_file_checks, cfd_->internal_stats(),
|
Added EventListener::OnTableFileCreationStarted() callback
Summary: Added EventListener::OnTableFileCreationStarted. EventListener::OnTableFileCreated will be called on failure case. User can check creation status via TableFileCreationInfo::status.
Test Plan: unit test.
Reviewers: dhruba, yhchiang, ott, sdong
Reviewed By: sdong
Subscribers: sdong, kradhakrishnan, IslamAbdelRahman, andrewkr, yhchiang, leveldb, ott, dhruba
Differential Revision: https://reviews.facebook.net/D56337
9 years ago
|
|
|
TableFileCreationReason::kFlush, event_logger_, job_context_->job_id,
|
|
|
|
Env::IO_HIGH, &table_properties_, 0 /* level */, current_time,
|
Periodic Compactions (#5166)
Summary:
Introducing Periodic Compactions.
This feature allows all the files in a CF to be periodically compacted. It could help in catching any corruptions that could creep into the DB proactively as every file is constantly getting re-compacted. And also, of course, it helps to cleanup data older than certain threshold.
- Introduced a new option `periodic_compaction_time` to control how long a file can live without being compacted in a CF.
- This works across all levels.
- The files are put in the same level after going through the compaction. (Related files in the same level are picked up as `ExpandInputstoCleanCut` is used).
- Compaction filters, if any, are invoked as usual.
- A new table property, `file_creation_time`, is introduced to implement this feature. This property is set to the time at which the SST file was created (and that time is given by the underlying Env/OS).
This feature can be enabled on its own, or in conjunction with `ttl`. It is possible to set a different time threshold for the bottom level when used in conjunction with ttl. Since `ttl` works only on 0 to last but one levels, you could set `ttl` to, say, 1 day, and `periodic_compaction_time` to, say, 7 days. Since `ttl < periodic_compaction_time` all files in last but one levels keep getting picked up based on ttl, and almost never based on periodic_compaction_time. The files in the bottom level get picked up for compaction based on `periodic_compaction_time`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5166
Differential Revision: D14884441
Pulled By: sagar0
fbshipit-source-id: 408426cbacb409c06386a98632dcf90bfa1bda47
6 years ago
|
|
|
oldest_key_time, write_hint, current_time);
|
|
|
|
LogFlush(db_options_.info_log);
|
|
|
|
}
|
|
|
|
ROCKS_LOG_INFO(db_options_.info_log,
|
|
|
|
"[%s] [JOB %d] Level-0 flush table #%" PRIu64 ": %" PRIu64
|
|
|
|
" bytes %s"
|
|
|
|
"%s",
|
|
|
|
cfd_->GetName().c_str(), job_context_->job_id,
|
|
|
|
meta_.fd.GetNumber(), meta_.fd.GetFileSize(),
|
|
|
|
s.ToString().c_str(),
|
|
|
|
meta_.marked_for_compaction ? " (needs compaction)" : "");
|
Add more table properties to EventLogger
Summary:
Example output:
{"time_micros": 1431463794310521, "job": 353, "event": "table_file_creation", "file_number": 387, "file_size": 86937, "table_info": {"data_size": "81801", "index_size": "9751", "filter_size": "0", "raw_key_size": "23448", "raw_average_key_size": "24.000000", "raw_value_size": "990571", "raw_average_value_size": "1013.890481", "num_data_blocks": "245", "num_entries": "977", "filter_policy_name": "", "kDeletedKeys": "0"}}
Also fixed a bug where BuildTable() in recovery was passing Env::IOHigh argument into paranoid_checks_file parameter.
Test Plan: make check + check out the output in the log
Reviewers: sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38343
10 years ago
|
|
|
|
|
|
|
if (s.ok() && output_file_directory_ != nullptr && sync_output_directory_) {
|
|
|
|
s = output_file_directory_->Fsync();
|
|
|
|
}
|
|
|
|
TEST_SYNC_POINT("FlushJob::WriteLevel0Table");
|
|
|
|
db_mutex_->Lock();
|
|
|
|
}
|
|
|
|
base_->Unref();
|
|
|
|
|
|
|
|
// Note that if file_size is zero, the file has been deleted and
|
|
|
|
// should not be added to the manifest.
|
|
|
|
if (s.ok() && meta_.fd.GetFileSize() > 0) {
|
|
|
|
// if we have more than 1 background thread, then we cannot
|
|
|
|
// insert files directly into higher levels because some other
|
|
|
|
// threads could be concurrently producing compacted files for
|
|
|
|
// that key range.
|
|
|
|
// Add file to L0
|
|
|
|
edit_->AddFile(0 /* level */, meta_.fd.GetNumber(), meta_.fd.GetPathId(),
|
|
|
|
meta_.fd.GetFileSize(), meta_.smallest, meta_.largest,
|
|
|
|
meta_.fd.smallest_seqno, meta_.fd.largest_seqno,
|
|
|
|
meta_.marked_for_compaction);
|
|
|
|
}
|
|
|
|
|
|
|
|
// Note that here we treat flush as level 0 compaction in internal stats
|
|
|
|
InternalStats::CompactionStats stats(CompactionReason::kFlush, 1);
|
|
|
|
stats.micros = db_options_.env->NowMicros() - start_micros;
|
|
|
|
stats.cpu_micros = db_options_.env->NowCPUNanos() / 1000 - start_cpu_micros;
|
|
|
|
stats.bytes_written = meta_.fd.GetFileSize();
|
|
|
|
RecordTimeToHistogram(stats_, FLUSH_TIME, stats.micros);
|
|
|
|
cfd_->internal_stats()->AddCompactionStats(0 /* level */, thread_pri_, stats);
|
|
|
|
cfd_->internal_stats()->AddCFStats(InternalStats::BYTES_FLUSHED,
|
|
|
|
meta_.fd.GetFileSize());
|
|
|
|
RecordFlushIOStats();
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
} // namespace rocksdb
|