You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
rocksdb/db/version_edit.h

635 lines
23 KiB

// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
//
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file. See the AUTHORS file for names of contributors.
#pragma once
#include <algorithm>
#include <set>
#include <string>
#include <utility>
#include <vector>
Define WAL related classes to be used in VersionEdit and VersionSet (#7164) Summary: `WalAddition`, `WalDeletion` are defined in `wal_version.h` and used in `VersionEdit`. `WalAddition` is used to represent events of creating a new WAL (no size, just log number), or closing a WAL (with size). `WalDeletion` is used to represent events of deleting or archiving a WAL, it means the WAL is no longer alive (won't be replayed during recovery). `WalSet` is the set of alive WALs kept in `VersionSet`. 1. Why use `WalDeletion` instead of relying on `MinLogNumber` to identify outdated WALs On recovery, we can compute `MinLogNumber()` based on the log numbers kept in MANIFEST, any log with number < MinLogNumber can be ignored. So it seems that we don't need to persist `WalDeletion` to MANIFEST, since we can ignore the WALs based on MinLogNumber. But the `MinLogNumber()` is actually a lower bound, it does not exactly mean that logs starting from MinLogNumber must exist. This is because in a corner case, when a column family is empty and never flushed, its log number is set to the largest log number, but not persisted in MANIFEST. So let's say there are 2 column families, when creating the DB, the first WAL has log number 1, so it's persisted to MANIFEST for both column families. Then CF 0 is empty and never flushed, CF 1 is updated and flushed, so a new WAL with log number 2 is created and persisted to MANIFEST for CF 1. But CF 0's log number in MANIFEST is still 1. So on recovery, MinLogNumber is 1, but since log 1 only contains data for CF 1, and CF 1 is flushed, log 1 might have already been deleted from disk. We can make `MinLogNumber()` be the exactly minimum log number that must exist, by persisting the most recent log number for empty column families that are not flushed. But if there are N such column families, then every time a new WAL is created, we need to add N records to MANIFEST. In current design, a record is persisted to MANIFEST only when WAL is created, closed, or deleted/archived, so the number of WAL related records are bounded to 3x number of WALs. 2. Why keep `WalSet` in `VersionSet` instead of applying the `VersionEdit`s to `VersionStorageInfo` `VersionEdit`s are originally designed to track the addition and deletion of SST files. The SST files are related to column families, each column family has a list of `Version`s, and each `Version` keeps the set of active SST files in `VersionStorageInfo`. But WALs are a concept of DB, they are not bounded to specific column families. So logically it does not make sense to store WALs in a column family's `Version`s. Also, `Version`'s purpose is to keep reference to SST / blob files, so that they are not deleted until there is no version referencing them. But a WAL is deleted regardless of version references. So we keep the WALs in `VersionSet` for the purpose of writing out the DB state's snapshot when creating new MANIFESTs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7164 Test Plan: make version_edit_test && ./version_edit_test make wal_edit_test && ./wal_edit_test Reviewed By: ltamasi Differential Revision: D22677936 Pulled By: cheng-chang fbshipit-source-id: 5a3b6890140e572ffd79eb37e6e4c3c32361a859
4 years ago
#include "db/blob/blob_file_addition.h"
#include "db/blob/blob_file_garbage.h"
#include "db/dbformat.h"
Define WAL related classes to be used in VersionEdit and VersionSet (#7164) Summary: `WalAddition`, `WalDeletion` are defined in `wal_version.h` and used in `VersionEdit`. `WalAddition` is used to represent events of creating a new WAL (no size, just log number), or closing a WAL (with size). `WalDeletion` is used to represent events of deleting or archiving a WAL, it means the WAL is no longer alive (won't be replayed during recovery). `WalSet` is the set of alive WALs kept in `VersionSet`. 1. Why use `WalDeletion` instead of relying on `MinLogNumber` to identify outdated WALs On recovery, we can compute `MinLogNumber()` based on the log numbers kept in MANIFEST, any log with number < MinLogNumber can be ignored. So it seems that we don't need to persist `WalDeletion` to MANIFEST, since we can ignore the WALs based on MinLogNumber. But the `MinLogNumber()` is actually a lower bound, it does not exactly mean that logs starting from MinLogNumber must exist. This is because in a corner case, when a column family is empty and never flushed, its log number is set to the largest log number, but not persisted in MANIFEST. So let's say there are 2 column families, when creating the DB, the first WAL has log number 1, so it's persisted to MANIFEST for both column families. Then CF 0 is empty and never flushed, CF 1 is updated and flushed, so a new WAL with log number 2 is created and persisted to MANIFEST for CF 1. But CF 0's log number in MANIFEST is still 1. So on recovery, MinLogNumber is 1, but since log 1 only contains data for CF 1, and CF 1 is flushed, log 1 might have already been deleted from disk. We can make `MinLogNumber()` be the exactly minimum log number that must exist, by persisting the most recent log number for empty column families that are not flushed. But if there are N such column families, then every time a new WAL is created, we need to add N records to MANIFEST. In current design, a record is persisted to MANIFEST only when WAL is created, closed, or deleted/archived, so the number of WAL related records are bounded to 3x number of WALs. 2. Why keep `WalSet` in `VersionSet` instead of applying the `VersionEdit`s to `VersionStorageInfo` `VersionEdit`s are originally designed to track the addition and deletion of SST files. The SST files are related to column families, each column family has a list of `Version`s, and each `Version` keeps the set of active SST files in `VersionStorageInfo`. But WALs are a concept of DB, they are not bounded to specific column families. So logically it does not make sense to store WALs in a column family's `Version`s. Also, `Version`'s purpose is to keep reference to SST / blob files, so that they are not deleted until there is no version referencing them. But a WAL is deleted regardless of version references. So we keep the WALs in `VersionSet` for the purpose of writing out the DB state's snapshot when creating new MANIFESTs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7164 Test Plan: make version_edit_test && ./version_edit_test make wal_edit_test && ./wal_edit_test Reviewed By: ltamasi Differential Revision: D22677936 Pulled By: cheng-chang fbshipit-source-id: 5a3b6890140e572ffd79eb37e6e4c3c32361a859
4 years ago
#include "db/wal_edit.h"
#include "memory/arena.h"
#include "rocksdb/advanced_options.h"
#include "rocksdb/cache.h"
#include "table/table_reader.h"
#include "util/autovector.h"
namespace ROCKSDB_NAMESPACE {
Define WAL related classes to be used in VersionEdit and VersionSet (#7164) Summary: `WalAddition`, `WalDeletion` are defined in `wal_version.h` and used in `VersionEdit`. `WalAddition` is used to represent events of creating a new WAL (no size, just log number), or closing a WAL (with size). `WalDeletion` is used to represent events of deleting or archiving a WAL, it means the WAL is no longer alive (won't be replayed during recovery). `WalSet` is the set of alive WALs kept in `VersionSet`. 1. Why use `WalDeletion` instead of relying on `MinLogNumber` to identify outdated WALs On recovery, we can compute `MinLogNumber()` based on the log numbers kept in MANIFEST, any log with number < MinLogNumber can be ignored. So it seems that we don't need to persist `WalDeletion` to MANIFEST, since we can ignore the WALs based on MinLogNumber. But the `MinLogNumber()` is actually a lower bound, it does not exactly mean that logs starting from MinLogNumber must exist. This is because in a corner case, when a column family is empty and never flushed, its log number is set to the largest log number, but not persisted in MANIFEST. So let's say there are 2 column families, when creating the DB, the first WAL has log number 1, so it's persisted to MANIFEST for both column families. Then CF 0 is empty and never flushed, CF 1 is updated and flushed, so a new WAL with log number 2 is created and persisted to MANIFEST for CF 1. But CF 0's log number in MANIFEST is still 1. So on recovery, MinLogNumber is 1, but since log 1 only contains data for CF 1, and CF 1 is flushed, log 1 might have already been deleted from disk. We can make `MinLogNumber()` be the exactly minimum log number that must exist, by persisting the most recent log number for empty column families that are not flushed. But if there are N such column families, then every time a new WAL is created, we need to add N records to MANIFEST. In current design, a record is persisted to MANIFEST only when WAL is created, closed, or deleted/archived, so the number of WAL related records are bounded to 3x number of WALs. 2. Why keep `WalSet` in `VersionSet` instead of applying the `VersionEdit`s to `VersionStorageInfo` `VersionEdit`s are originally designed to track the addition and deletion of SST files. The SST files are related to column families, each column family has a list of `Version`s, and each `Version` keeps the set of active SST files in `VersionStorageInfo`. But WALs are a concept of DB, they are not bounded to specific column families. So logically it does not make sense to store WALs in a column family's `Version`s. Also, `Version`'s purpose is to keep reference to SST / blob files, so that they are not deleted until there is no version referencing them. But a WAL is deleted regardless of version references. So we keep the WALs in `VersionSet` for the purpose of writing out the DB state's snapshot when creating new MANIFESTs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7164 Test Plan: make version_edit_test && ./version_edit_test make wal_edit_test && ./wal_edit_test Reviewed By: ltamasi Differential Revision: D22677936 Pulled By: cheng-chang fbshipit-source-id: 5a3b6890140e572ffd79eb37e6e4c3c32361a859
4 years ago
// Tag numbers for serialized VersionEdit. These numbers are written to
// disk and should not be changed. The number should be forward compatible so
// users can down-grade RocksDB safely. A future Tag is ignored by doing '&'
// between Tag and kTagSafeIgnoreMask field.
enum Tag : uint32_t {
kComparator = 1,
kLogNumber = 2,
kNextFileNumber = 3,
kLastSequence = 4,
kCompactPointer = 5,
kDeletedFile = 6,
kNewFile = 7,
// 8 was used for large value refs
kPrevLogNumber = 9,
kMinLogNumberToKeep = 10,
// these are new formats divergent from open source leveldb
kNewFile2 = 100,
kNewFile3 = 102,
kNewFile4 = 103, // 4th (the latest) format version of adding files
kColumnFamily = 200, // specify column family for version edit
kColumnFamilyAdd = 201,
kColumnFamilyDrop = 202,
kMaxColumnFamily = 203,
kInAtomicGroup = 300,
kBlobFileAddition = 400,
kBlobFileGarbage,
Define WAL related classes to be used in VersionEdit and VersionSet (#7164) Summary: `WalAddition`, `WalDeletion` are defined in `wal_version.h` and used in `VersionEdit`. `WalAddition` is used to represent events of creating a new WAL (no size, just log number), or closing a WAL (with size). `WalDeletion` is used to represent events of deleting or archiving a WAL, it means the WAL is no longer alive (won't be replayed during recovery). `WalSet` is the set of alive WALs kept in `VersionSet`. 1. Why use `WalDeletion` instead of relying on `MinLogNumber` to identify outdated WALs On recovery, we can compute `MinLogNumber()` based on the log numbers kept in MANIFEST, any log with number < MinLogNumber can be ignored. So it seems that we don't need to persist `WalDeletion` to MANIFEST, since we can ignore the WALs based on MinLogNumber. But the `MinLogNumber()` is actually a lower bound, it does not exactly mean that logs starting from MinLogNumber must exist. This is because in a corner case, when a column family is empty and never flushed, its log number is set to the largest log number, but not persisted in MANIFEST. So let's say there are 2 column families, when creating the DB, the first WAL has log number 1, so it's persisted to MANIFEST for both column families. Then CF 0 is empty and never flushed, CF 1 is updated and flushed, so a new WAL with log number 2 is created and persisted to MANIFEST for CF 1. But CF 0's log number in MANIFEST is still 1. So on recovery, MinLogNumber is 1, but since log 1 only contains data for CF 1, and CF 1 is flushed, log 1 might have already been deleted from disk. We can make `MinLogNumber()` be the exactly minimum log number that must exist, by persisting the most recent log number for empty column families that are not flushed. But if there are N such column families, then every time a new WAL is created, we need to add N records to MANIFEST. In current design, a record is persisted to MANIFEST only when WAL is created, closed, or deleted/archived, so the number of WAL related records are bounded to 3x number of WALs. 2. Why keep `WalSet` in `VersionSet` instead of applying the `VersionEdit`s to `VersionStorageInfo` `VersionEdit`s are originally designed to track the addition and deletion of SST files. The SST files are related to column families, each column family has a list of `Version`s, and each `Version` keeps the set of active SST files in `VersionStorageInfo`. But WALs are a concept of DB, they are not bounded to specific column families. So logically it does not make sense to store WALs in a column family's `Version`s. Also, `Version`'s purpose is to keep reference to SST / blob files, so that they are not deleted until there is no version referencing them. But a WAL is deleted regardless of version references. So we keep the WALs in `VersionSet` for the purpose of writing out the DB state's snapshot when creating new MANIFESTs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7164 Test Plan: make version_edit_test && ./version_edit_test make wal_edit_test && ./wal_edit_test Reviewed By: ltamasi Differential Revision: D22677936 Pulled By: cheng-chang fbshipit-source-id: 5a3b6890140e572ffd79eb37e6e4c3c32361a859
4 years ago
// Mask for an unidentified tag from the future which can be safely ignored.
kTagSafeIgnoreMask = 1 << 13,
// Forward compatible (aka ignorable) records
kDbId,
kBlobFileAddition_DEPRECATED,
kBlobFileGarbage_DEPRECATED,
Define WAL related classes to be used in VersionEdit and VersionSet (#7164) Summary: `WalAddition`, `WalDeletion` are defined in `wal_version.h` and used in `VersionEdit`. `WalAddition` is used to represent events of creating a new WAL (no size, just log number), or closing a WAL (with size). `WalDeletion` is used to represent events of deleting or archiving a WAL, it means the WAL is no longer alive (won't be replayed during recovery). `WalSet` is the set of alive WALs kept in `VersionSet`. 1. Why use `WalDeletion` instead of relying on `MinLogNumber` to identify outdated WALs On recovery, we can compute `MinLogNumber()` based on the log numbers kept in MANIFEST, any log with number < MinLogNumber can be ignored. So it seems that we don't need to persist `WalDeletion` to MANIFEST, since we can ignore the WALs based on MinLogNumber. But the `MinLogNumber()` is actually a lower bound, it does not exactly mean that logs starting from MinLogNumber must exist. This is because in a corner case, when a column family is empty and never flushed, its log number is set to the largest log number, but not persisted in MANIFEST. So let's say there are 2 column families, when creating the DB, the first WAL has log number 1, so it's persisted to MANIFEST for both column families. Then CF 0 is empty and never flushed, CF 1 is updated and flushed, so a new WAL with log number 2 is created and persisted to MANIFEST for CF 1. But CF 0's log number in MANIFEST is still 1. So on recovery, MinLogNumber is 1, but since log 1 only contains data for CF 1, and CF 1 is flushed, log 1 might have already been deleted from disk. We can make `MinLogNumber()` be the exactly minimum log number that must exist, by persisting the most recent log number for empty column families that are not flushed. But if there are N such column families, then every time a new WAL is created, we need to add N records to MANIFEST. In current design, a record is persisted to MANIFEST only when WAL is created, closed, or deleted/archived, so the number of WAL related records are bounded to 3x number of WALs. 2. Why keep `WalSet` in `VersionSet` instead of applying the `VersionEdit`s to `VersionStorageInfo` `VersionEdit`s are originally designed to track the addition and deletion of SST files. The SST files are related to column families, each column family has a list of `Version`s, and each `Version` keeps the set of active SST files in `VersionStorageInfo`. But WALs are a concept of DB, they are not bounded to specific column families. So logically it does not make sense to store WALs in a column family's `Version`s. Also, `Version`'s purpose is to keep reference to SST / blob files, so that they are not deleted until there is no version referencing them. But a WAL is deleted regardless of version references. So we keep the WALs in `VersionSet` for the purpose of writing out the DB state's snapshot when creating new MANIFESTs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7164 Test Plan: make version_edit_test && ./version_edit_test make wal_edit_test && ./wal_edit_test Reviewed By: ltamasi Differential Revision: D22677936 Pulled By: cheng-chang fbshipit-source-id: 5a3b6890140e572ffd79eb37e6e4c3c32361a859
4 years ago
kWalAddition,
kWalDeletion,
kFullHistoryTsLow,
kWalAddition2,
kWalDeletion2,
Define WAL related classes to be used in VersionEdit and VersionSet (#7164) Summary: `WalAddition`, `WalDeletion` are defined in `wal_version.h` and used in `VersionEdit`. `WalAddition` is used to represent events of creating a new WAL (no size, just log number), or closing a WAL (with size). `WalDeletion` is used to represent events of deleting or archiving a WAL, it means the WAL is no longer alive (won't be replayed during recovery). `WalSet` is the set of alive WALs kept in `VersionSet`. 1. Why use `WalDeletion` instead of relying on `MinLogNumber` to identify outdated WALs On recovery, we can compute `MinLogNumber()` based on the log numbers kept in MANIFEST, any log with number < MinLogNumber can be ignored. So it seems that we don't need to persist `WalDeletion` to MANIFEST, since we can ignore the WALs based on MinLogNumber. But the `MinLogNumber()` is actually a lower bound, it does not exactly mean that logs starting from MinLogNumber must exist. This is because in a corner case, when a column family is empty and never flushed, its log number is set to the largest log number, but not persisted in MANIFEST. So let's say there are 2 column families, when creating the DB, the first WAL has log number 1, so it's persisted to MANIFEST for both column families. Then CF 0 is empty and never flushed, CF 1 is updated and flushed, so a new WAL with log number 2 is created and persisted to MANIFEST for CF 1. But CF 0's log number in MANIFEST is still 1. So on recovery, MinLogNumber is 1, but since log 1 only contains data for CF 1, and CF 1 is flushed, log 1 might have already been deleted from disk. We can make `MinLogNumber()` be the exactly minimum log number that must exist, by persisting the most recent log number for empty column families that are not flushed. But if there are N such column families, then every time a new WAL is created, we need to add N records to MANIFEST. In current design, a record is persisted to MANIFEST only when WAL is created, closed, or deleted/archived, so the number of WAL related records are bounded to 3x number of WALs. 2. Why keep `WalSet` in `VersionSet` instead of applying the `VersionEdit`s to `VersionStorageInfo` `VersionEdit`s are originally designed to track the addition and deletion of SST files. The SST files are related to column families, each column family has a list of `Version`s, and each `Version` keeps the set of active SST files in `VersionStorageInfo`. But WALs are a concept of DB, they are not bounded to specific column families. So logically it does not make sense to store WALs in a column family's `Version`s. Also, `Version`'s purpose is to keep reference to SST / blob files, so that they are not deleted until there is no version referencing them. But a WAL is deleted regardless of version references. So we keep the WALs in `VersionSet` for the purpose of writing out the DB state's snapshot when creating new MANIFESTs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7164 Test Plan: make version_edit_test && ./version_edit_test make wal_edit_test && ./wal_edit_test Reviewed By: ltamasi Differential Revision: D22677936 Pulled By: cheng-chang fbshipit-source-id: 5a3b6890140e572ffd79eb37e6e4c3c32361a859
4 years ago
};
enum NewFileCustomTag : uint32_t {
kTerminate = 1, // The end of customized fields
kNeedCompaction = 2,
// Since Manifest is not entirely forward-compatible, we currently encode
// kMinLogNumberToKeep as part of NewFile as a hack. This should be removed
// when manifest becomes forward-compatible.
Define WAL related classes to be used in VersionEdit and VersionSet (#7164) Summary: `WalAddition`, `WalDeletion` are defined in `wal_version.h` and used in `VersionEdit`. `WalAddition` is used to represent events of creating a new WAL (no size, just log number), or closing a WAL (with size). `WalDeletion` is used to represent events of deleting or archiving a WAL, it means the WAL is no longer alive (won't be replayed during recovery). `WalSet` is the set of alive WALs kept in `VersionSet`. 1. Why use `WalDeletion` instead of relying on `MinLogNumber` to identify outdated WALs On recovery, we can compute `MinLogNumber()` based on the log numbers kept in MANIFEST, any log with number < MinLogNumber can be ignored. So it seems that we don't need to persist `WalDeletion` to MANIFEST, since we can ignore the WALs based on MinLogNumber. But the `MinLogNumber()` is actually a lower bound, it does not exactly mean that logs starting from MinLogNumber must exist. This is because in a corner case, when a column family is empty and never flushed, its log number is set to the largest log number, but not persisted in MANIFEST. So let's say there are 2 column families, when creating the DB, the first WAL has log number 1, so it's persisted to MANIFEST for both column families. Then CF 0 is empty and never flushed, CF 1 is updated and flushed, so a new WAL with log number 2 is created and persisted to MANIFEST for CF 1. But CF 0's log number in MANIFEST is still 1. So on recovery, MinLogNumber is 1, but since log 1 only contains data for CF 1, and CF 1 is flushed, log 1 might have already been deleted from disk. We can make `MinLogNumber()` be the exactly minimum log number that must exist, by persisting the most recent log number for empty column families that are not flushed. But if there are N such column families, then every time a new WAL is created, we need to add N records to MANIFEST. In current design, a record is persisted to MANIFEST only when WAL is created, closed, or deleted/archived, so the number of WAL related records are bounded to 3x number of WALs. 2. Why keep `WalSet` in `VersionSet` instead of applying the `VersionEdit`s to `VersionStorageInfo` `VersionEdit`s are originally designed to track the addition and deletion of SST files. The SST files are related to column families, each column family has a list of `Version`s, and each `Version` keeps the set of active SST files in `VersionStorageInfo`. But WALs are a concept of DB, they are not bounded to specific column families. So logically it does not make sense to store WALs in a column family's `Version`s. Also, `Version`'s purpose is to keep reference to SST / blob files, so that they are not deleted until there is no version referencing them. But a WAL is deleted regardless of version references. So we keep the WALs in `VersionSet` for the purpose of writing out the DB state's snapshot when creating new MANIFESTs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7164 Test Plan: make version_edit_test && ./version_edit_test make wal_edit_test && ./wal_edit_test Reviewed By: ltamasi Differential Revision: D22677936 Pulled By: cheng-chang fbshipit-source-id: 5a3b6890140e572ffd79eb37e6e4c3c32361a859
4 years ago
kMinLogNumberToKeepHack = 3,
kOldestBlobFileNumber = 4,
kOldestAncesterTime = 5,
kFileCreationTime = 6,
kFileChecksum = 7,
kFileChecksumFuncName = 8,
kTemperature = 9,
kMinTimestamp = 10,
kMaxTimestamp = 11,
Define WAL related classes to be used in VersionEdit and VersionSet (#7164) Summary: `WalAddition`, `WalDeletion` are defined in `wal_version.h` and used in `VersionEdit`. `WalAddition` is used to represent events of creating a new WAL (no size, just log number), or closing a WAL (with size). `WalDeletion` is used to represent events of deleting or archiving a WAL, it means the WAL is no longer alive (won't be replayed during recovery). `WalSet` is the set of alive WALs kept in `VersionSet`. 1. Why use `WalDeletion` instead of relying on `MinLogNumber` to identify outdated WALs On recovery, we can compute `MinLogNumber()` based on the log numbers kept in MANIFEST, any log with number < MinLogNumber can be ignored. So it seems that we don't need to persist `WalDeletion` to MANIFEST, since we can ignore the WALs based on MinLogNumber. But the `MinLogNumber()` is actually a lower bound, it does not exactly mean that logs starting from MinLogNumber must exist. This is because in a corner case, when a column family is empty and never flushed, its log number is set to the largest log number, but not persisted in MANIFEST. So let's say there are 2 column families, when creating the DB, the first WAL has log number 1, so it's persisted to MANIFEST for both column families. Then CF 0 is empty and never flushed, CF 1 is updated and flushed, so a new WAL with log number 2 is created and persisted to MANIFEST for CF 1. But CF 0's log number in MANIFEST is still 1. So on recovery, MinLogNumber is 1, but since log 1 only contains data for CF 1, and CF 1 is flushed, log 1 might have already been deleted from disk. We can make `MinLogNumber()` be the exactly minimum log number that must exist, by persisting the most recent log number for empty column families that are not flushed. But if there are N such column families, then every time a new WAL is created, we need to add N records to MANIFEST. In current design, a record is persisted to MANIFEST only when WAL is created, closed, or deleted/archived, so the number of WAL related records are bounded to 3x number of WALs. 2. Why keep `WalSet` in `VersionSet` instead of applying the `VersionEdit`s to `VersionStorageInfo` `VersionEdit`s are originally designed to track the addition and deletion of SST files. The SST files are related to column families, each column family has a list of `Version`s, and each `Version` keeps the set of active SST files in `VersionStorageInfo`. But WALs are a concept of DB, they are not bounded to specific column families. So logically it does not make sense to store WALs in a column family's `Version`s. Also, `Version`'s purpose is to keep reference to SST / blob files, so that they are not deleted until there is no version referencing them. But a WAL is deleted regardless of version references. So we keep the WALs in `VersionSet` for the purpose of writing out the DB state's snapshot when creating new MANIFESTs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7164 Test Plan: make version_edit_test && ./version_edit_test make wal_edit_test && ./wal_edit_test Reviewed By: ltamasi Differential Revision: D22677936 Pulled By: cheng-chang fbshipit-source-id: 5a3b6890140e572ffd79eb37e6e4c3c32361a859
4 years ago
// If this bit for the custom tag is set, opening DB should fail if
// we don't know this field.
kCustomTagNonSafeIgnoreMask = 1 << 6,
// Forward incompatible (aka unignorable) fields
kPathId,
};
class VersionSet;
constexpr uint64_t kFileNumberMask = 0x3FFFFFFFFFFFFFFF;
constexpr uint64_t kUnknownOldestAncesterTime = 0;
constexpr uint64_t kUnknownFileCreationTime = 0;
extern uint64_t PackFileNumberAndPathId(uint64_t number, uint64_t path_id);
// A copyable structure contains information needed to read data from an SST
// file. It can contain a pointer to a table reader opened for the file, or
// file number and size, which can be used to create a new table reader for it.
// The behavior is undefined when a copied of the structure is used when the
// file is not in any live version any more.
struct FileDescriptor {
// Table reader in table_reader_handle
TableReader* table_reader;
uint64_t packed_number_and_path_id;
uint64_t file_size; // File size in bytes
SequenceNumber smallest_seqno; // The smallest seqno in this file
SequenceNumber largest_seqno; // The largest seqno in this file
FileDescriptor() : FileDescriptor(0, 0, 0) {}
FileDescriptor(uint64_t number, uint32_t path_id, uint64_t _file_size)
: FileDescriptor(number, path_id, _file_size, kMaxSequenceNumber, 0) {}
FileDescriptor(uint64_t number, uint32_t path_id, uint64_t _file_size,
SequenceNumber _smallest_seqno, SequenceNumber _largest_seqno)
: table_reader(nullptr),
packed_number_and_path_id(PackFileNumberAndPathId(number, path_id)),
file_size(_file_size),
smallest_seqno(_smallest_seqno),
largest_seqno(_largest_seqno) {}
FileDescriptor(const FileDescriptor& fd) { *this = fd; }
FileDescriptor& operator=(const FileDescriptor& fd) {
table_reader = fd.table_reader;
packed_number_and_path_id = fd.packed_number_and_path_id;
file_size = fd.file_size;
smallest_seqno = fd.smallest_seqno;
largest_seqno = fd.largest_seqno;
return *this;
}
uint64_t GetNumber() const {
return packed_number_and_path_id & kFileNumberMask;
}
uint32_t GetPathId() const {
return static_cast<uint32_t>(
packed_number_and_path_id / (kFileNumberMask + 1));
}
uint64_t GetFileSize() const { return file_size; }
};
struct FileSampledStats {
FileSampledStats() : num_reads_sampled(0) {}
FileSampledStats(const FileSampledStats& other) { *this = other; }
FileSampledStats& operator=(const FileSampledStats& other) {
num_reads_sampled = other.num_reads_sampled.load();
return *this;
}
// number of user reads to this file.
mutable std::atomic<uint64_t> num_reads_sampled;
};
struct FileMetaData {
FileDescriptor fd;
InternalKey smallest; // Smallest internal key served by table
InternalKey largest; // Largest internal key served by table
// Needs to be disposed when refs becomes 0.
Cache::Handle* table_reader_handle = nullptr;
FileSampledStats stats;
// Stats for compensating deletion entries during compaction
// File size compensated by deletion entry.
// This is updated in Version::UpdateAccumulatedStats() first time when the
// file is created or loaded. After it is updated (!= 0), it is immutable.
uint64_t compensated_file_size = 0;
// These values can mutate, but they can only be read or written from
// single-threaded LogAndApply thread
uint64_t num_entries = 0; // the number of entries.
uint64_t num_deletions = 0; // the number of deletion entries.
uint64_t raw_key_size = 0; // total uncompressed key size.
uint64_t raw_value_size = 0; // total uncompressed value size.
int refs = 0; // Reference count
bool being_compacted = false; // Is this file undergoing compaction?
bool init_stats_from_file = false; // true if the data-entry stats of this
// file has initialized from file.
bool marked_for_compaction = false; // True if client asked us nicely to
// compact this file.
Temperature temperature = Temperature::kUnknown;
// Used only in BlobDB. The file number of the oldest blob file this SST file
// refers to. 0 is an invalid value; BlobDB numbers the files starting from 1.
uint64_t oldest_blob_file_number = kInvalidBlobFileNumber;
// The file could be the compaction output from other SST files, which could
// in turn be outputs for compact older SST files. We track the memtable
// flush timestamp for the oldest SST file that eventually contribute data
// to this file. 0 means the information is not available.
uint64_t oldest_ancester_time = kUnknownOldestAncesterTime;
// Unix time when the SST file is created.
uint64_t file_creation_time = kUnknownFileCreationTime;
// File checksum
std::string file_checksum = kUnknownFileChecksum;
// File checksum function name
std::string file_checksum_func_name = kUnknownFileChecksumFuncName;
// Min (oldest) timestamp of keys in this file
std::string min_timestamp;
// Max (newest) timestamp of keys in this file
std::string max_timestamp;
FileMetaData() = default;
FileMetaData(uint64_t file, uint32_t file_path_id, uint64_t file_size,
const InternalKey& smallest_key, const InternalKey& largest_key,
const SequenceNumber& smallest_seq,
const SequenceNumber& largest_seq, bool marked_for_compact,
Temperature _temperature, uint64_t oldest_blob_file,
uint64_t _oldest_ancester_time, uint64_t _file_creation_time,
const std::string& _file_checksum,
const std::string& _file_checksum_func_name,
std::string _min_timestamp, std::string _max_timestamp)
: fd(file, file_path_id, file_size, smallest_seq, largest_seq),
smallest(smallest_key),
largest(largest_key),
marked_for_compaction(marked_for_compact),
temperature(_temperature),
oldest_blob_file_number(oldest_blob_file),
oldest_ancester_time(_oldest_ancester_time),
file_creation_time(_file_creation_time),
file_checksum(_file_checksum),
file_checksum_func_name(_file_checksum_func_name),
min_timestamp(std::move(_min_timestamp)),
max_timestamp(std::move(_max_timestamp)) {
TEST_SYNC_POINT_CALLBACK("FileMetaData::FileMetaData", this);
}
// REQUIRED: Keys must be given to the function in sorted order (it expects
// the last key to be the largest).
void UpdateBoundaries(const Slice& key, const Slice& value,
SequenceNumber seqno, ValueType value_type);
// Unlike UpdateBoundaries, ranges do not need to be presented in any
// particular order.
void UpdateBoundariesForRange(const InternalKey& start,
const InternalKey& end, SequenceNumber seqno,
const InternalKeyComparator& icmp) {
if (smallest.size() == 0 || icmp.Compare(start, smallest) < 0) {
smallest = start;
}
if (largest.size() == 0 || icmp.Compare(largest, end) < 0) {
largest = end;
}
fd.smallest_seqno = std::min(fd.smallest_seqno, seqno);
fd.largest_seqno = std::max(fd.largest_seqno, seqno);
}
// Try to get oldest ancester time from the class itself or table properties
// if table reader is already pinned.
// 0 means the information is not available.
uint64_t TryGetOldestAncesterTime() {
if (oldest_ancester_time != kUnknownOldestAncesterTime) {
return oldest_ancester_time;
} else if (fd.table_reader != nullptr &&
fd.table_reader->GetTableProperties() != nullptr) {
return fd.table_reader->GetTableProperties()->creation_time;
}
return kUnknownOldestAncesterTime;
}
uint64_t TryGetFileCreationTime() {
if (file_creation_time != kUnknownFileCreationTime) {
return file_creation_time;
} else if (fd.table_reader != nullptr &&
fd.table_reader->GetTableProperties() != nullptr) {
return fd.table_reader->GetTableProperties()->file_creation_time;
}
return kUnknownFileCreationTime;
}
};
// A compressed copy of file meta data that just contain minimum data needed
// to server read operations, while still keeping the pointer to full metadata
// of the file in case it is needed.
create compressed_levels_ in Version, allocate its space using arena. Make Version::Get, Version::FindFile faster Summary: Define CompressedFileMetaData that just contains fd, smallest_slice, largest_slice. Create compressed_levels_ in Version, the space is allocated using arena Thus increase the file meta data locality, speed up "Get" and "FindFile" benchmark with in-memory tmpfs, could have 4% improvement under "random read" and 2% improvement under "read while writing" benchmark command: ./db_bench --db=/mnt/db/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --block_size=4096 --cache_size=17179869184 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --disable_wal=0 --sync=0 --disable_data_sync=1 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_grandparent_overlap_factor=10 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --perf_level=0 --benchmarks=readwhilewriting,readwhilewriting,readwhilewriting --use_existing_db=1 --num=52428800 --threads=1 —writes_per_second=81920 Read Random: From 1.8363 ms/op, improve to 1.7587 ms/op. Read while writing: From 2.985 ms/op, improve to 2.924 ms/op. Test Plan: make all check Reviewers: ljin, haobo, yhchiang, sdong Reviewed By: sdong Subscribers: dhruba, igor Differential Revision: https://reviews.facebook.net/D19419
11 years ago
struct FdWithKeyRange {
FileDescriptor fd;
FileMetaData* file_metadata; // Point to all metadata
create compressed_levels_ in Version, allocate its space using arena. Make Version::Get, Version::FindFile faster Summary: Define CompressedFileMetaData that just contains fd, smallest_slice, largest_slice. Create compressed_levels_ in Version, the space is allocated using arena Thus increase the file meta data locality, speed up "Get" and "FindFile" benchmark with in-memory tmpfs, could have 4% improvement under "random read" and 2% improvement under "read while writing" benchmark command: ./db_bench --db=/mnt/db/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --block_size=4096 --cache_size=17179869184 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --disable_wal=0 --sync=0 --disable_data_sync=1 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_grandparent_overlap_factor=10 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --perf_level=0 --benchmarks=readwhilewriting,readwhilewriting,readwhilewriting --use_existing_db=1 --num=52428800 --threads=1 —writes_per_second=81920 Read Random: From 1.8363 ms/op, improve to 1.7587 ms/op. Read while writing: From 2.985 ms/op, improve to 2.924 ms/op. Test Plan: make all check Reviewers: ljin, haobo, yhchiang, sdong Reviewed By: sdong Subscribers: dhruba, igor Differential Revision: https://reviews.facebook.net/D19419
11 years ago
Slice smallest_key; // slice that contain smallest key
Slice largest_key; // slice that contain largest key
FdWithKeyRange()
: fd(),
file_metadata(nullptr),
create compressed_levels_ in Version, allocate its space using arena. Make Version::Get, Version::FindFile faster Summary: Define CompressedFileMetaData that just contains fd, smallest_slice, largest_slice. Create compressed_levels_ in Version, the space is allocated using arena Thus increase the file meta data locality, speed up "Get" and "FindFile" benchmark with in-memory tmpfs, could have 4% improvement under "random read" and 2% improvement under "read while writing" benchmark command: ./db_bench --db=/mnt/db/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --block_size=4096 --cache_size=17179869184 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --disable_wal=0 --sync=0 --disable_data_sync=1 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_grandparent_overlap_factor=10 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --perf_level=0 --benchmarks=readwhilewriting,readwhilewriting,readwhilewriting --use_existing_db=1 --num=52428800 --threads=1 —writes_per_second=81920 Read Random: From 1.8363 ms/op, improve to 1.7587 ms/op. Read while writing: From 2.985 ms/op, improve to 2.924 ms/op. Test Plan: make all check Reviewers: ljin, haobo, yhchiang, sdong Reviewed By: sdong Subscribers: dhruba, igor Differential Revision: https://reviews.facebook.net/D19419
11 years ago
smallest_key(),
largest_key() {
}
FdWithKeyRange(FileDescriptor _fd, Slice _smallest_key, Slice _largest_key,
FileMetaData* _file_metadata)
: fd(_fd),
file_metadata(_file_metadata),
smallest_key(_smallest_key),
largest_key(_largest_key) {}
create compressed_levels_ in Version, allocate its space using arena. Make Version::Get, Version::FindFile faster Summary: Define CompressedFileMetaData that just contains fd, smallest_slice, largest_slice. Create compressed_levels_ in Version, the space is allocated using arena Thus increase the file meta data locality, speed up "Get" and "FindFile" benchmark with in-memory tmpfs, could have 4% improvement under "random read" and 2% improvement under "read while writing" benchmark command: ./db_bench --db=/mnt/db/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --block_size=4096 --cache_size=17179869184 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --disable_wal=0 --sync=0 --disable_data_sync=1 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_grandparent_overlap_factor=10 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --perf_level=0 --benchmarks=readwhilewriting,readwhilewriting,readwhilewriting --use_existing_db=1 --num=52428800 --threads=1 —writes_per_second=81920 Read Random: From 1.8363 ms/op, improve to 1.7587 ms/op. Read while writing: From 2.985 ms/op, improve to 2.924 ms/op. Test Plan: make all check Reviewers: ljin, haobo, yhchiang, sdong Reviewed By: sdong Subscribers: dhruba, igor Differential Revision: https://reviews.facebook.net/D19419
11 years ago
};
// Data structure to store an array of FdWithKeyRange in one level
// Actual data is guaranteed to be stored closely
struct LevelFilesBrief {
create compressed_levels_ in Version, allocate its space using arena. Make Version::Get, Version::FindFile faster Summary: Define CompressedFileMetaData that just contains fd, smallest_slice, largest_slice. Create compressed_levels_ in Version, the space is allocated using arena Thus increase the file meta data locality, speed up "Get" and "FindFile" benchmark with in-memory tmpfs, could have 4% improvement under "random read" and 2% improvement under "read while writing" benchmark command: ./db_bench --db=/mnt/db/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --block_size=4096 --cache_size=17179869184 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --disable_wal=0 --sync=0 --disable_data_sync=1 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_grandparent_overlap_factor=10 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --perf_level=0 --benchmarks=readwhilewriting,readwhilewriting,readwhilewriting --use_existing_db=1 --num=52428800 --threads=1 —writes_per_second=81920 Read Random: From 1.8363 ms/op, improve to 1.7587 ms/op. Read while writing: From 2.985 ms/op, improve to 2.924 ms/op. Test Plan: make all check Reviewers: ljin, haobo, yhchiang, sdong Reviewed By: sdong Subscribers: dhruba, igor Differential Revision: https://reviews.facebook.net/D19419
11 years ago
size_t num_files;
FdWithKeyRange* files;
LevelFilesBrief() {
create compressed_levels_ in Version, allocate its space using arena. Make Version::Get, Version::FindFile faster Summary: Define CompressedFileMetaData that just contains fd, smallest_slice, largest_slice. Create compressed_levels_ in Version, the space is allocated using arena Thus increase the file meta data locality, speed up "Get" and "FindFile" benchmark with in-memory tmpfs, could have 4% improvement under "random read" and 2% improvement under "read while writing" benchmark command: ./db_bench --db=/mnt/db/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --block_size=4096 --cache_size=17179869184 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --disable_wal=0 --sync=0 --disable_data_sync=1 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_grandparent_overlap_factor=10 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --perf_level=0 --benchmarks=readwhilewriting,readwhilewriting,readwhilewriting --use_existing_db=1 --num=52428800 --threads=1 —writes_per_second=81920 Read Random: From 1.8363 ms/op, improve to 1.7587 ms/op. Read while writing: From 2.985 ms/op, improve to 2.924 ms/op. Test Plan: make all check Reviewers: ljin, haobo, yhchiang, sdong Reviewed By: sdong Subscribers: dhruba, igor Differential Revision: https://reviews.facebook.net/D19419
11 years ago
num_files = 0;
files = nullptr;
}
};
// The state of a DB at any given time is referred to as a Version.
// Any modification to the Version is considered a Version Edit. A Version is
// constructed by joining a sequence of Version Edits. Version Edits are written
// to the MANIFEST file.
class VersionEdit {
public:
void Clear();
void SetDBId(const std::string& db_id) {
has_db_id_ = true;
db_id_ = db_id;
}
bool HasDbId() const { return has_db_id_; }
const std::string& GetDbId() const { return db_id_; }
void SetComparatorName(const Slice& name) {
has_comparator_ = true;
comparator_ = name.ToString();
}
bool HasComparatorName() const { return has_comparator_; }
const std::string& GetComparatorName() const { return comparator_; }
void SetLogNumber(uint64_t num) {
has_log_number_ = true;
log_number_ = num;
}
bool HasLogNumber() const { return has_log_number_; }
uint64_t GetLogNumber() const { return log_number_; }
void SetPrevLogNumber(uint64_t num) {
has_prev_log_number_ = true;
prev_log_number_ = num;
}
bool HasPrevLogNumber() const { return has_prev_log_number_; }
uint64_t GetPrevLogNumber() const { return prev_log_number_; }
void SetNextFile(uint64_t num) {
has_next_file_number_ = true;
next_file_number_ = num;
}
bool HasNextFile() const { return has_next_file_number_; }
uint64_t GetNextFile() const { return next_file_number_; }
void SetMaxColumnFamily(uint32_t max_column_family) {
has_max_column_family_ = true;
max_column_family_ = max_column_family;
}
bool HasMaxColumnFamily() const { return has_max_column_family_; }
uint32_t GetMaxColumnFamily() const { return max_column_family_; }
Skip deleted WALs during recovery Summary: This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic. Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction) This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2. Closes https://github.com/facebook/rocksdb/pull/3765 Differential Revision: D7747618 Pulled By: siying fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
7 years ago
void SetMinLogNumberToKeep(uint64_t num) {
has_min_log_number_to_keep_ = true;
min_log_number_to_keep_ = num;
}
bool HasMinLogNumberToKeep() const { return has_min_log_number_to_keep_; }
uint64_t GetMinLogNumberToKeep() const { return min_log_number_to_keep_; }
Skip deleted WALs during recovery Summary: This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic. Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction) This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2. Closes https://github.com/facebook/rocksdb/pull/3765 Differential Revision: D7747618 Pulled By: siying fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
7 years ago
void SetLastSequence(SequenceNumber seq) {
has_last_sequence_ = true;
last_sequence_ = seq;
}
bool HasLastSequence() const { return has_last_sequence_; }
SequenceNumber GetLastSequence() const { return last_sequence_; }
// Delete the specified table file from the specified level.
void DeleteFile(int level, uint64_t file) {
deleted_files_.emplace(level, file);
}
// Retrieve the table files deleted as well as their associated levels.
using DeletedFiles = std::set<std::pair<int, uint64_t>>;
const DeletedFiles& GetDeletedFiles() const { return deleted_files_; }
// Add the specified table file at the specified level.
// REQUIRES: "smallest" and "largest" are smallest and largest keys in file
// REQUIRES: "oldest_blob_file_number" is the number of the oldest blob file
// referred to by this file if any, kInvalidBlobFileNumber otherwise.
void AddFile(int level, uint64_t file, uint32_t file_path_id,
uint64_t file_size, const InternalKey& smallest,
const InternalKey& largest, const SequenceNumber& smallest_seqno,
const SequenceNumber& largest_seqno, bool marked_for_compaction,
Temperature temperature, uint64_t oldest_blob_file_number,
uint64_t oldest_ancester_time, uint64_t file_creation_time,
const std::string& file_checksum,
const std::string& file_checksum_func_name,
const std::string& min_timestamp,
const std::string& max_timestamp) {
assert(smallest_seqno <= largest_seqno);
new_files_.emplace_back(
level,
FileMetaData(file, file_path_id, file_size, smallest, largest,
smallest_seqno, largest_seqno, marked_for_compaction,
temperature, oldest_blob_file_number, oldest_ancester_time,
file_creation_time, file_checksum, file_checksum_func_name,
min_timestamp, max_timestamp));
Recover to exact latest seqno of data committed to MANIFEST (#9305) Summary: The LastSequence field in the MANIFEST file is the baseline seqno for a recovered DB. Recovering WAL entries might cause the recovered DB's seqno to advance above this baseline, but the recovered DB will never use a smaller seqno. Before this PR, we were writing the DB's seqno at the time of LogAndApply() as the LastSequence value. This works in the sense that it is a large enough baseline for the recovered DB that it'll never overwrite any records in existing SST files. At the same time, it's arbitrarily larger than what's needed. This behavior comes from LevelDB, where there was no tracking of largest seqno in an SST file. Now we know the largest seqno of newly written SST files, so we can write an exact value in LastSequence that actually reflects the largest seqno in any file referred to by the MANIFEST. This is primarily useful for correctness testing with unsynced data loss, where the recovered DB's seqno needs to indicate what records were recovered. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9305 Test Plan: - https://github.com/facebook/rocksdb/issues/9338 adds crash-recovery correctness testing coverage for WAL disabled use cases - https://github.com/facebook/rocksdb/issues/9357 will extend that testing to cover file ingestion - Added assertion at end of LogAndApply() for `VersionSet::descriptor_last_sequence_` consistency with files - Manually tested upgrade/downgrade compatibility with a custom crash test that randomly picks between a `db_stress` built with and without this PR (for old code it must run with `-disable_wal=0`) Reviewed By: riversand963 Differential Revision: D33182770 Pulled By: ajkr fbshipit-source-id: 0bfafaf685f347cc8cb0e1d62e0186340a738f7d
3 years ago
if (!HasLastSequence() || largest_seqno > GetLastSequence()) {
SetLastSequence(largest_seqno);
}
}
void AddFile(int level, const FileMetaData& f) {
assert(f.fd.smallest_seqno <= f.fd.largest_seqno);
new_files_.emplace_back(level, f);
Recover to exact latest seqno of data committed to MANIFEST (#9305) Summary: The LastSequence field in the MANIFEST file is the baseline seqno for a recovered DB. Recovering WAL entries might cause the recovered DB's seqno to advance above this baseline, but the recovered DB will never use a smaller seqno. Before this PR, we were writing the DB's seqno at the time of LogAndApply() as the LastSequence value. This works in the sense that it is a large enough baseline for the recovered DB that it'll never overwrite any records in existing SST files. At the same time, it's arbitrarily larger than what's needed. This behavior comes from LevelDB, where there was no tracking of largest seqno in an SST file. Now we know the largest seqno of newly written SST files, so we can write an exact value in LastSequence that actually reflects the largest seqno in any file referred to by the MANIFEST. This is primarily useful for correctness testing with unsynced data loss, where the recovered DB's seqno needs to indicate what records were recovered. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9305 Test Plan: - https://github.com/facebook/rocksdb/issues/9338 adds crash-recovery correctness testing coverage for WAL disabled use cases - https://github.com/facebook/rocksdb/issues/9357 will extend that testing to cover file ingestion - Added assertion at end of LogAndApply() for `VersionSet::descriptor_last_sequence_` consistency with files - Manually tested upgrade/downgrade compatibility with a custom crash test that randomly picks between a `db_stress` built with and without this PR (for old code it must run with `-disable_wal=0`) Reviewed By: riversand963 Differential Revision: D33182770 Pulled By: ajkr fbshipit-source-id: 0bfafaf685f347cc8cb0e1d62e0186340a738f7d
3 years ago
if (!HasLastSequence() || f.fd.largest_seqno > GetLastSequence()) {
SetLastSequence(f.fd.largest_seqno);
}
}
// Retrieve the table files added as well as their associated levels.
using NewFiles = std::vector<std::pair<int, FileMetaData>>;
const NewFiles& GetNewFiles() const { return new_files_; }
// Add a new blob file.
void AddBlobFile(uint64_t blob_file_number, uint64_t total_blob_count,
uint64_t total_blob_bytes, std::string checksum_method,
std::string checksum_value) {
blob_file_additions_.emplace_back(
blob_file_number, total_blob_count, total_blob_bytes,
std::move(checksum_method), std::move(checksum_value));
}
void AddBlobFile(BlobFileAddition blob_file_addition) {
blob_file_additions_.emplace_back(std::move(blob_file_addition));
}
// Retrieve all the blob files added.
using BlobFileAdditions = std::vector<BlobFileAddition>;
const BlobFileAdditions& GetBlobFileAdditions() const {
return blob_file_additions_;
}
void SetBlobFileAdditions(BlobFileAdditions blob_file_additions) {
assert(blob_file_additions_.empty());
blob_file_additions_ = std::move(blob_file_additions);
}
// Add garbage for an existing blob file. Note: intentionally broken English
// follows.
void AddBlobFileGarbage(uint64_t blob_file_number,
uint64_t garbage_blob_count,
uint64_t garbage_blob_bytes) {
blob_file_garbages_.emplace_back(blob_file_number, garbage_blob_count,
garbage_blob_bytes);
}
void AddBlobFileGarbage(BlobFileGarbage blob_file_garbage) {
blob_file_garbages_.emplace_back(std::move(blob_file_garbage));
}
// Retrieve all the blob file garbage added.
using BlobFileGarbages = std::vector<BlobFileGarbage>;
const BlobFileGarbages& GetBlobFileGarbages() const {
return blob_file_garbages_;
}
void SetBlobFileGarbages(BlobFileGarbages blob_file_garbages) {
assert(blob_file_garbages_.empty());
blob_file_garbages_ = std::move(blob_file_garbages);
}
Define WAL related classes to be used in VersionEdit and VersionSet (#7164) Summary: `WalAddition`, `WalDeletion` are defined in `wal_version.h` and used in `VersionEdit`. `WalAddition` is used to represent events of creating a new WAL (no size, just log number), or closing a WAL (with size). `WalDeletion` is used to represent events of deleting or archiving a WAL, it means the WAL is no longer alive (won't be replayed during recovery). `WalSet` is the set of alive WALs kept in `VersionSet`. 1. Why use `WalDeletion` instead of relying on `MinLogNumber` to identify outdated WALs On recovery, we can compute `MinLogNumber()` based on the log numbers kept in MANIFEST, any log with number < MinLogNumber can be ignored. So it seems that we don't need to persist `WalDeletion` to MANIFEST, since we can ignore the WALs based on MinLogNumber. But the `MinLogNumber()` is actually a lower bound, it does not exactly mean that logs starting from MinLogNumber must exist. This is because in a corner case, when a column family is empty and never flushed, its log number is set to the largest log number, but not persisted in MANIFEST. So let's say there are 2 column families, when creating the DB, the first WAL has log number 1, so it's persisted to MANIFEST for both column families. Then CF 0 is empty and never flushed, CF 1 is updated and flushed, so a new WAL with log number 2 is created and persisted to MANIFEST for CF 1. But CF 0's log number in MANIFEST is still 1. So on recovery, MinLogNumber is 1, but since log 1 only contains data for CF 1, and CF 1 is flushed, log 1 might have already been deleted from disk. We can make `MinLogNumber()` be the exactly minimum log number that must exist, by persisting the most recent log number for empty column families that are not flushed. But if there are N such column families, then every time a new WAL is created, we need to add N records to MANIFEST. In current design, a record is persisted to MANIFEST only when WAL is created, closed, or deleted/archived, so the number of WAL related records are bounded to 3x number of WALs. 2. Why keep `WalSet` in `VersionSet` instead of applying the `VersionEdit`s to `VersionStorageInfo` `VersionEdit`s are originally designed to track the addition and deletion of SST files. The SST files are related to column families, each column family has a list of `Version`s, and each `Version` keeps the set of active SST files in `VersionStorageInfo`. But WALs are a concept of DB, they are not bounded to specific column families. So logically it does not make sense to store WALs in a column family's `Version`s. Also, `Version`'s purpose is to keep reference to SST / blob files, so that they are not deleted until there is no version referencing them. But a WAL is deleted regardless of version references. So we keep the WALs in `VersionSet` for the purpose of writing out the DB state's snapshot when creating new MANIFESTs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7164 Test Plan: make version_edit_test && ./version_edit_test make wal_edit_test && ./wal_edit_test Reviewed By: ltamasi Differential Revision: D22677936 Pulled By: cheng-chang fbshipit-source-id: 5a3b6890140e572ffd79eb37e6e4c3c32361a859
4 years ago
// Add a WAL (either just created or closed).
// AddWal and DeleteWalsBefore cannot be called on the same VersionEdit.
Define WAL related classes to be used in VersionEdit and VersionSet (#7164) Summary: `WalAddition`, `WalDeletion` are defined in `wal_version.h` and used in `VersionEdit`. `WalAddition` is used to represent events of creating a new WAL (no size, just log number), or closing a WAL (with size). `WalDeletion` is used to represent events of deleting or archiving a WAL, it means the WAL is no longer alive (won't be replayed during recovery). `WalSet` is the set of alive WALs kept in `VersionSet`. 1. Why use `WalDeletion` instead of relying on `MinLogNumber` to identify outdated WALs On recovery, we can compute `MinLogNumber()` based on the log numbers kept in MANIFEST, any log with number < MinLogNumber can be ignored. So it seems that we don't need to persist `WalDeletion` to MANIFEST, since we can ignore the WALs based on MinLogNumber. But the `MinLogNumber()` is actually a lower bound, it does not exactly mean that logs starting from MinLogNumber must exist. This is because in a corner case, when a column family is empty and never flushed, its log number is set to the largest log number, but not persisted in MANIFEST. So let's say there are 2 column families, when creating the DB, the first WAL has log number 1, so it's persisted to MANIFEST for both column families. Then CF 0 is empty and never flushed, CF 1 is updated and flushed, so a new WAL with log number 2 is created and persisted to MANIFEST for CF 1. But CF 0's log number in MANIFEST is still 1. So on recovery, MinLogNumber is 1, but since log 1 only contains data for CF 1, and CF 1 is flushed, log 1 might have already been deleted from disk. We can make `MinLogNumber()` be the exactly minimum log number that must exist, by persisting the most recent log number for empty column families that are not flushed. But if there are N such column families, then every time a new WAL is created, we need to add N records to MANIFEST. In current design, a record is persisted to MANIFEST only when WAL is created, closed, or deleted/archived, so the number of WAL related records are bounded to 3x number of WALs. 2. Why keep `WalSet` in `VersionSet` instead of applying the `VersionEdit`s to `VersionStorageInfo` `VersionEdit`s are originally designed to track the addition and deletion of SST files. The SST files are related to column families, each column family has a list of `Version`s, and each `Version` keeps the set of active SST files in `VersionStorageInfo`. But WALs are a concept of DB, they are not bounded to specific column families. So logically it does not make sense to store WALs in a column family's `Version`s. Also, `Version`'s purpose is to keep reference to SST / blob files, so that they are not deleted until there is no version referencing them. But a WAL is deleted regardless of version references. So we keep the WALs in `VersionSet` for the purpose of writing out the DB state's snapshot when creating new MANIFESTs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7164 Test Plan: make version_edit_test && ./version_edit_test make wal_edit_test && ./wal_edit_test Reviewed By: ltamasi Differential Revision: D22677936 Pulled By: cheng-chang fbshipit-source-id: 5a3b6890140e572ffd79eb37e6e4c3c32361a859
4 years ago
void AddWal(WalNumber number, WalMetadata metadata = WalMetadata()) {
assert(NumEntries() == wal_additions_.size());
Define WAL related classes to be used in VersionEdit and VersionSet (#7164) Summary: `WalAddition`, `WalDeletion` are defined in `wal_version.h` and used in `VersionEdit`. `WalAddition` is used to represent events of creating a new WAL (no size, just log number), or closing a WAL (with size). `WalDeletion` is used to represent events of deleting or archiving a WAL, it means the WAL is no longer alive (won't be replayed during recovery). `WalSet` is the set of alive WALs kept in `VersionSet`. 1. Why use `WalDeletion` instead of relying on `MinLogNumber` to identify outdated WALs On recovery, we can compute `MinLogNumber()` based on the log numbers kept in MANIFEST, any log with number < MinLogNumber can be ignored. So it seems that we don't need to persist `WalDeletion` to MANIFEST, since we can ignore the WALs based on MinLogNumber. But the `MinLogNumber()` is actually a lower bound, it does not exactly mean that logs starting from MinLogNumber must exist. This is because in a corner case, when a column family is empty and never flushed, its log number is set to the largest log number, but not persisted in MANIFEST. So let's say there are 2 column families, when creating the DB, the first WAL has log number 1, so it's persisted to MANIFEST for both column families. Then CF 0 is empty and never flushed, CF 1 is updated and flushed, so a new WAL with log number 2 is created and persisted to MANIFEST for CF 1. But CF 0's log number in MANIFEST is still 1. So on recovery, MinLogNumber is 1, but since log 1 only contains data for CF 1, and CF 1 is flushed, log 1 might have already been deleted from disk. We can make `MinLogNumber()` be the exactly minimum log number that must exist, by persisting the most recent log number for empty column families that are not flushed. But if there are N such column families, then every time a new WAL is created, we need to add N records to MANIFEST. In current design, a record is persisted to MANIFEST only when WAL is created, closed, or deleted/archived, so the number of WAL related records are bounded to 3x number of WALs. 2. Why keep `WalSet` in `VersionSet` instead of applying the `VersionEdit`s to `VersionStorageInfo` `VersionEdit`s are originally designed to track the addition and deletion of SST files. The SST files are related to column families, each column family has a list of `Version`s, and each `Version` keeps the set of active SST files in `VersionStorageInfo`. But WALs are a concept of DB, they are not bounded to specific column families. So logically it does not make sense to store WALs in a column family's `Version`s. Also, `Version`'s purpose is to keep reference to SST / blob files, so that they are not deleted until there is no version referencing them. But a WAL is deleted regardless of version references. So we keep the WALs in `VersionSet` for the purpose of writing out the DB state's snapshot when creating new MANIFESTs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7164 Test Plan: make version_edit_test && ./version_edit_test make wal_edit_test && ./wal_edit_test Reviewed By: ltamasi Differential Revision: D22677936 Pulled By: cheng-chang fbshipit-source-id: 5a3b6890140e572ffd79eb37e6e4c3c32361a859
4 years ago
wal_additions_.emplace_back(number, std::move(metadata));
}
// Retrieve all the added WALs.
const WalAdditions& GetWalAdditions() const { return wal_additions_; }
bool IsWalAddition() const { return !wal_additions_.empty(); }
Define WAL related classes to be used in VersionEdit and VersionSet (#7164) Summary: `WalAddition`, `WalDeletion` are defined in `wal_version.h` and used in `VersionEdit`. `WalAddition` is used to represent events of creating a new WAL (no size, just log number), or closing a WAL (with size). `WalDeletion` is used to represent events of deleting or archiving a WAL, it means the WAL is no longer alive (won't be replayed during recovery). `WalSet` is the set of alive WALs kept in `VersionSet`. 1. Why use `WalDeletion` instead of relying on `MinLogNumber` to identify outdated WALs On recovery, we can compute `MinLogNumber()` based on the log numbers kept in MANIFEST, any log with number < MinLogNumber can be ignored. So it seems that we don't need to persist `WalDeletion` to MANIFEST, since we can ignore the WALs based on MinLogNumber. But the `MinLogNumber()` is actually a lower bound, it does not exactly mean that logs starting from MinLogNumber must exist. This is because in a corner case, when a column family is empty and never flushed, its log number is set to the largest log number, but not persisted in MANIFEST. So let's say there are 2 column families, when creating the DB, the first WAL has log number 1, so it's persisted to MANIFEST for both column families. Then CF 0 is empty and never flushed, CF 1 is updated and flushed, so a new WAL with log number 2 is created and persisted to MANIFEST for CF 1. But CF 0's log number in MANIFEST is still 1. So on recovery, MinLogNumber is 1, but since log 1 only contains data for CF 1, and CF 1 is flushed, log 1 might have already been deleted from disk. We can make `MinLogNumber()` be the exactly minimum log number that must exist, by persisting the most recent log number for empty column families that are not flushed. But if there are N such column families, then every time a new WAL is created, we need to add N records to MANIFEST. In current design, a record is persisted to MANIFEST only when WAL is created, closed, or deleted/archived, so the number of WAL related records are bounded to 3x number of WALs. 2. Why keep `WalSet` in `VersionSet` instead of applying the `VersionEdit`s to `VersionStorageInfo` `VersionEdit`s are originally designed to track the addition and deletion of SST files. The SST files are related to column families, each column family has a list of `Version`s, and each `Version` keeps the set of active SST files in `VersionStorageInfo`. But WALs are a concept of DB, they are not bounded to specific column families. So logically it does not make sense to store WALs in a column family's `Version`s. Also, `Version`'s purpose is to keep reference to SST / blob files, so that they are not deleted until there is no version referencing them. But a WAL is deleted regardless of version references. So we keep the WALs in `VersionSet` for the purpose of writing out the DB state's snapshot when creating new MANIFESTs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7164 Test Plan: make version_edit_test && ./version_edit_test make wal_edit_test && ./wal_edit_test Reviewed By: ltamasi Differential Revision: D22677936 Pulled By: cheng-chang fbshipit-source-id: 5a3b6890140e572ffd79eb37e6e4c3c32361a859
4 years ago
// Delete a WAL (either directly deleted or archived).
// AddWal and DeleteWalsBefore cannot be called on the same VersionEdit.
void DeleteWalsBefore(WalNumber number) {
assert((NumEntries() == 1) == !wal_deletion_.IsEmpty());
wal_deletion_ = WalDeletion(number);
}
Define WAL related classes to be used in VersionEdit and VersionSet (#7164) Summary: `WalAddition`, `WalDeletion` are defined in `wal_version.h` and used in `VersionEdit`. `WalAddition` is used to represent events of creating a new WAL (no size, just log number), or closing a WAL (with size). `WalDeletion` is used to represent events of deleting or archiving a WAL, it means the WAL is no longer alive (won't be replayed during recovery). `WalSet` is the set of alive WALs kept in `VersionSet`. 1. Why use `WalDeletion` instead of relying on `MinLogNumber` to identify outdated WALs On recovery, we can compute `MinLogNumber()` based on the log numbers kept in MANIFEST, any log with number < MinLogNumber can be ignored. So it seems that we don't need to persist `WalDeletion` to MANIFEST, since we can ignore the WALs based on MinLogNumber. But the `MinLogNumber()` is actually a lower bound, it does not exactly mean that logs starting from MinLogNumber must exist. This is because in a corner case, when a column family is empty and never flushed, its log number is set to the largest log number, but not persisted in MANIFEST. So let's say there are 2 column families, when creating the DB, the first WAL has log number 1, so it's persisted to MANIFEST for both column families. Then CF 0 is empty and never flushed, CF 1 is updated and flushed, so a new WAL with log number 2 is created and persisted to MANIFEST for CF 1. But CF 0's log number in MANIFEST is still 1. So on recovery, MinLogNumber is 1, but since log 1 only contains data for CF 1, and CF 1 is flushed, log 1 might have already been deleted from disk. We can make `MinLogNumber()` be the exactly minimum log number that must exist, by persisting the most recent log number for empty column families that are not flushed. But if there are N such column families, then every time a new WAL is created, we need to add N records to MANIFEST. In current design, a record is persisted to MANIFEST only when WAL is created, closed, or deleted/archived, so the number of WAL related records are bounded to 3x number of WALs. 2. Why keep `WalSet` in `VersionSet` instead of applying the `VersionEdit`s to `VersionStorageInfo` `VersionEdit`s are originally designed to track the addition and deletion of SST files. The SST files are related to column families, each column family has a list of `Version`s, and each `Version` keeps the set of active SST files in `VersionStorageInfo`. But WALs are a concept of DB, they are not bounded to specific column families. So logically it does not make sense to store WALs in a column family's `Version`s. Also, `Version`'s purpose is to keep reference to SST / blob files, so that they are not deleted until there is no version referencing them. But a WAL is deleted regardless of version references. So we keep the WALs in `VersionSet` for the purpose of writing out the DB state's snapshot when creating new MANIFESTs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7164 Test Plan: make version_edit_test && ./version_edit_test make wal_edit_test && ./wal_edit_test Reviewed By: ltamasi Differential Revision: D22677936 Pulled By: cheng-chang fbshipit-source-id: 5a3b6890140e572ffd79eb37e6e4c3c32361a859
4 years ago
const WalDeletion& GetWalDeletion() const { return wal_deletion_; }
Define WAL related classes to be used in VersionEdit and VersionSet (#7164) Summary: `WalAddition`, `WalDeletion` are defined in `wal_version.h` and used in `VersionEdit`. `WalAddition` is used to represent events of creating a new WAL (no size, just log number), or closing a WAL (with size). `WalDeletion` is used to represent events of deleting or archiving a WAL, it means the WAL is no longer alive (won't be replayed during recovery). `WalSet` is the set of alive WALs kept in `VersionSet`. 1. Why use `WalDeletion` instead of relying on `MinLogNumber` to identify outdated WALs On recovery, we can compute `MinLogNumber()` based on the log numbers kept in MANIFEST, any log with number < MinLogNumber can be ignored. So it seems that we don't need to persist `WalDeletion` to MANIFEST, since we can ignore the WALs based on MinLogNumber. But the `MinLogNumber()` is actually a lower bound, it does not exactly mean that logs starting from MinLogNumber must exist. This is because in a corner case, when a column family is empty and never flushed, its log number is set to the largest log number, but not persisted in MANIFEST. So let's say there are 2 column families, when creating the DB, the first WAL has log number 1, so it's persisted to MANIFEST for both column families. Then CF 0 is empty and never flushed, CF 1 is updated and flushed, so a new WAL with log number 2 is created and persisted to MANIFEST for CF 1. But CF 0's log number in MANIFEST is still 1. So on recovery, MinLogNumber is 1, but since log 1 only contains data for CF 1, and CF 1 is flushed, log 1 might have already been deleted from disk. We can make `MinLogNumber()` be the exactly minimum log number that must exist, by persisting the most recent log number for empty column families that are not flushed. But if there are N such column families, then every time a new WAL is created, we need to add N records to MANIFEST. In current design, a record is persisted to MANIFEST only when WAL is created, closed, or deleted/archived, so the number of WAL related records are bounded to 3x number of WALs. 2. Why keep `WalSet` in `VersionSet` instead of applying the `VersionEdit`s to `VersionStorageInfo` `VersionEdit`s are originally designed to track the addition and deletion of SST files. The SST files are related to column families, each column family has a list of `Version`s, and each `Version` keeps the set of active SST files in `VersionStorageInfo`. But WALs are a concept of DB, they are not bounded to specific column families. So logically it does not make sense to store WALs in a column family's `Version`s. Also, `Version`'s purpose is to keep reference to SST / blob files, so that they are not deleted until there is no version referencing them. But a WAL is deleted regardless of version references. So we keep the WALs in `VersionSet` for the purpose of writing out the DB state's snapshot when creating new MANIFESTs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7164 Test Plan: make version_edit_test && ./version_edit_test make wal_edit_test && ./wal_edit_test Reviewed By: ltamasi Differential Revision: D22677936 Pulled By: cheng-chang fbshipit-source-id: 5a3b6890140e572ffd79eb37e6e4c3c32361a859
4 years ago
bool IsWalDeletion() const { return !wal_deletion_.IsEmpty(); }
bool IsWalManipulation() const {
size_t entries = NumEntries();
return (entries > 0) && ((entries == wal_additions_.size()) ||
(entries == !wal_deletion_.IsEmpty()));
}
Define WAL related classes to be used in VersionEdit and VersionSet (#7164) Summary: `WalAddition`, `WalDeletion` are defined in `wal_version.h` and used in `VersionEdit`. `WalAddition` is used to represent events of creating a new WAL (no size, just log number), or closing a WAL (with size). `WalDeletion` is used to represent events of deleting or archiving a WAL, it means the WAL is no longer alive (won't be replayed during recovery). `WalSet` is the set of alive WALs kept in `VersionSet`. 1. Why use `WalDeletion` instead of relying on `MinLogNumber` to identify outdated WALs On recovery, we can compute `MinLogNumber()` based on the log numbers kept in MANIFEST, any log with number < MinLogNumber can be ignored. So it seems that we don't need to persist `WalDeletion` to MANIFEST, since we can ignore the WALs based on MinLogNumber. But the `MinLogNumber()` is actually a lower bound, it does not exactly mean that logs starting from MinLogNumber must exist. This is because in a corner case, when a column family is empty and never flushed, its log number is set to the largest log number, but not persisted in MANIFEST. So let's say there are 2 column families, when creating the DB, the first WAL has log number 1, so it's persisted to MANIFEST for both column families. Then CF 0 is empty and never flushed, CF 1 is updated and flushed, so a new WAL with log number 2 is created and persisted to MANIFEST for CF 1. But CF 0's log number in MANIFEST is still 1. So on recovery, MinLogNumber is 1, but since log 1 only contains data for CF 1, and CF 1 is flushed, log 1 might have already been deleted from disk. We can make `MinLogNumber()` be the exactly minimum log number that must exist, by persisting the most recent log number for empty column families that are not flushed. But if there are N such column families, then every time a new WAL is created, we need to add N records to MANIFEST. In current design, a record is persisted to MANIFEST only when WAL is created, closed, or deleted/archived, so the number of WAL related records are bounded to 3x number of WALs. 2. Why keep `WalSet` in `VersionSet` instead of applying the `VersionEdit`s to `VersionStorageInfo` `VersionEdit`s are originally designed to track the addition and deletion of SST files. The SST files are related to column families, each column family has a list of `Version`s, and each `Version` keeps the set of active SST files in `VersionStorageInfo`. But WALs are a concept of DB, they are not bounded to specific column families. So logically it does not make sense to store WALs in a column family's `Version`s. Also, `Version`'s purpose is to keep reference to SST / blob files, so that they are not deleted until there is no version referencing them. But a WAL is deleted regardless of version references. So we keep the WALs in `VersionSet` for the purpose of writing out the DB state's snapshot when creating new MANIFESTs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7164 Test Plan: make version_edit_test && ./version_edit_test make wal_edit_test && ./wal_edit_test Reviewed By: ltamasi Differential Revision: D22677936 Pulled By: cheng-chang fbshipit-source-id: 5a3b6890140e572ffd79eb37e6e4c3c32361a859
4 years ago
// Number of edits
size_t NumEntries() const {
return new_files_.size() + deleted_files_.size() +
Define WAL related classes to be used in VersionEdit and VersionSet (#7164) Summary: `WalAddition`, `WalDeletion` are defined in `wal_version.h` and used in `VersionEdit`. `WalAddition` is used to represent events of creating a new WAL (no size, just log number), or closing a WAL (with size). `WalDeletion` is used to represent events of deleting or archiving a WAL, it means the WAL is no longer alive (won't be replayed during recovery). `WalSet` is the set of alive WALs kept in `VersionSet`. 1. Why use `WalDeletion` instead of relying on `MinLogNumber` to identify outdated WALs On recovery, we can compute `MinLogNumber()` based on the log numbers kept in MANIFEST, any log with number < MinLogNumber can be ignored. So it seems that we don't need to persist `WalDeletion` to MANIFEST, since we can ignore the WALs based on MinLogNumber. But the `MinLogNumber()` is actually a lower bound, it does not exactly mean that logs starting from MinLogNumber must exist. This is because in a corner case, when a column family is empty and never flushed, its log number is set to the largest log number, but not persisted in MANIFEST. So let's say there are 2 column families, when creating the DB, the first WAL has log number 1, so it's persisted to MANIFEST for both column families. Then CF 0 is empty and never flushed, CF 1 is updated and flushed, so a new WAL with log number 2 is created and persisted to MANIFEST for CF 1. But CF 0's log number in MANIFEST is still 1. So on recovery, MinLogNumber is 1, but since log 1 only contains data for CF 1, and CF 1 is flushed, log 1 might have already been deleted from disk. We can make `MinLogNumber()` be the exactly minimum log number that must exist, by persisting the most recent log number for empty column families that are not flushed. But if there are N such column families, then every time a new WAL is created, we need to add N records to MANIFEST. In current design, a record is persisted to MANIFEST only when WAL is created, closed, or deleted/archived, so the number of WAL related records are bounded to 3x number of WALs. 2. Why keep `WalSet` in `VersionSet` instead of applying the `VersionEdit`s to `VersionStorageInfo` `VersionEdit`s are originally designed to track the addition and deletion of SST files. The SST files are related to column families, each column family has a list of `Version`s, and each `Version` keeps the set of active SST files in `VersionStorageInfo`. But WALs are a concept of DB, they are not bounded to specific column families. So logically it does not make sense to store WALs in a column family's `Version`s. Also, `Version`'s purpose is to keep reference to SST / blob files, so that they are not deleted until there is no version referencing them. But a WAL is deleted regardless of version references. So we keep the WALs in `VersionSet` for the purpose of writing out the DB state's snapshot when creating new MANIFESTs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7164 Test Plan: make version_edit_test && ./version_edit_test make wal_edit_test && ./wal_edit_test Reviewed By: ltamasi Differential Revision: D22677936 Pulled By: cheng-chang fbshipit-source-id: 5a3b6890140e572ffd79eb37e6e4c3c32361a859
4 years ago
blob_file_additions_.size() + blob_file_garbages_.size() +
wal_additions_.size() + !wal_deletion_.IsEmpty();
}
void SetColumnFamily(uint32_t column_family_id) {
column_family_ = column_family_id;
}
uint32_t GetColumnFamily() const { return column_family_; }
// set column family ID by calling SetColumnFamily()
void AddColumnFamily(const std::string& name) {
assert(!is_column_family_drop_);
assert(!is_column_family_add_);
assert(NumEntries() == 0);
is_column_family_add_ = true;
column_family_name_ = name;
}
// set column family ID by calling SetColumnFamily()
void DropColumnFamily() {
assert(!is_column_family_drop_);
assert(!is_column_family_add_);
assert(NumEntries() == 0);
is_column_family_drop_ = true;
}
bool IsColumnFamilyManipulation() const {
return is_column_family_add_ || is_column_family_drop_;
}
bool IsColumnFamilyAdd() const { return is_column_family_add_; }
bool IsColumnFamilyDrop() const { return is_column_family_drop_; }
void MarkAtomicGroup(uint32_t remaining_entries) {
is_in_atomic_group_ = true;
remaining_entries_ = remaining_entries;
}
bool IsInAtomicGroup() const { return is_in_atomic_group_; }
uint32_t GetRemainingEntries() const { return remaining_entries_; }
bool HasFullHistoryTsLow() const { return !full_history_ts_low_.empty(); }
const std::string& GetFullHistoryTsLow() const {
assert(HasFullHistoryTsLow());
return full_history_ts_low_;
}
void SetFullHistoryTsLow(std::string full_history_ts_low) {
assert(!full_history_ts_low.empty());
full_history_ts_low_ = std::move(full_history_ts_low);
}
// return true on success.
bool EncodeTo(std::string* dst) const;
Status DecodeFrom(const Slice& src);
std::string DebugString(bool hex_key = false) const;
Added JSON manifest dump option to ldb command Summary: Added a new flag --json to the ldb manifest_dump command that prints out the version edits as JSON objects for easier reading and parsing of information. Test Plan: **Sample usage: ** ``` ./ldb manifest_dump --json --path=path/to/manifest/file ``` **Sample output:** ``` {"EditNumber": 0, "Comparator": "leveldb.BytewiseComparator", "ColumnFamily": 0} {"EditNumber": 1, "LogNumber": 0, "ColumnFamily": 0} {"EditNumber": 2, "LogNumber": 4, "PrevLogNumber": 0, "NextFileNumber": 7, "LastSeq": 35356, "AddedFiles": [{"Level": 0, "FileNumber": 5, "FileSize": 1949284, "SmallestIKey": "'", "LargestIKey": "'"}], "ColumnFamily": 0} ... {"EditNumber": 13, "PrevLogNumber": 0, "NextFileNumber": 36, "LastSeq": 290994, "DeletedFiles": [{"Level": 0, "FileNumber": 17}, {"Level": 0, "FileNumber": 20}, {"Level": 0, "FileNumber": 22}, {"Level": 0, "FileNumber": 24}, {"Level": 1, "FileNumber": 13}, {"Level": 1, "FileNumber": 14}, {"Level": 1, "FileNumber": 15}, {"Level": 1, "FileNumber": 18}], "AddedFiles": [{"Level": 1, "FileNumber": 25, "FileSize": 2114340, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 26, "FileSize": 2115213, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 27, "FileSize": 2114807, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 30, "FileSize": 2115271, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 31, "FileSize": 2115165, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 32, "FileSize": 2114683, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 35, "FileSize": 1757512, "SmallestIKey": "'", "LargestIKey": "'"}], "ColumnFamily": 0} ... ``` Reviewers: sdong, anthony, yhchiang, igor Reviewed By: igor Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D41727
9 years ago
std::string DebugJSON(int edit_num, bool hex_key = false) const;
private:
Support for single-primary, multi-secondary instances (#4899) Summary: This PR allows RocksDB to run in single-primary, multi-secondary process mode. The writer is a regular RocksDB (e.g. an `DBImpl`) instance playing the role of a primary. Multiple `DBImplSecondary` processes (secondaries) share the same set of SST files, MANIFEST, WAL files with the primary. Secondaries tail the MANIFEST of the primary and apply updates to their own in-memory state of the file system, e.g. `VersionStorageInfo`. This PR has several components: 1. (Originally in #4745). Add a `PathNotFound` subcode to `IOError` to denote the failure when a secondary tries to open a file which has been deleted by the primary. 2. (Similar to #4602). Add `FragmentBufferedReader` to handle partially-read, trailing record at the end of a log from where future read can continue. 3. (Originally in #4710 and #4820). Add implementation of the secondary, i.e. `DBImplSecondary`. 3.1 Tail the primary's MANIFEST during recovery. 3.2 Tail the primary's MANIFEST during normal processing by calling `ReadAndApply`. 3.3 Tailing WAL will be in a future PR. 4. Add an example in 'examples/multi_processes_example.cc' to demonstrate the usage of secondary RocksDB instance in a multi-process setting. Instructions to run the example can be found at the beginning of the source code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/4899 Differential Revision: D14510945 Pulled By: riversand963 fbshipit-source-id: 4ac1c5693e6012ad23f7b4b42d3c374fecbe8886
6 years ago
friend class ReactiveVersionSet;
friend class VersionEditHandlerBase;
friend class ListColumnFamiliesHandler;
friend class VersionEditHandler;
friend class VersionEditHandlerPointInTime;
friend class DumpManifestHandler;
friend class VersionSet;
friend class Version;
friend class AtomicGroupReadBuffer;
bool GetLevel(Slice* input, int* level, const char** msg);
const char* DecodeNewFile4From(Slice* input);
int max_level_ = 0;
std::string db_id_;
std::string comparator_;
uint64_t log_number_ = 0;
uint64_t prev_log_number_ = 0;
uint64_t next_file_number_ = 0;
uint32_t max_column_family_ = 0;
Skip deleted WALs during recovery Summary: This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic. Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction) This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2. Closes https://github.com/facebook/rocksdb/pull/3765 Differential Revision: D7747618 Pulled By: siying fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
7 years ago
// The most recent WAL log number that is deleted
uint64_t min_log_number_to_keep_ = 0;
SequenceNumber last_sequence_ = 0;
bool has_db_id_ = false;
bool has_comparator_ = false;
bool has_log_number_ = false;
bool has_prev_log_number_ = false;
bool has_next_file_number_ = false;
bool has_max_column_family_ = false;
bool has_min_log_number_to_keep_ = false;
bool has_last_sequence_ = false;
DeletedFiles deleted_files_;
NewFiles new_files_;
BlobFileAdditions blob_file_additions_;
BlobFileGarbages blob_file_garbages_;
Define WAL related classes to be used in VersionEdit and VersionSet (#7164) Summary: `WalAddition`, `WalDeletion` are defined in `wal_version.h` and used in `VersionEdit`. `WalAddition` is used to represent events of creating a new WAL (no size, just log number), or closing a WAL (with size). `WalDeletion` is used to represent events of deleting or archiving a WAL, it means the WAL is no longer alive (won't be replayed during recovery). `WalSet` is the set of alive WALs kept in `VersionSet`. 1. Why use `WalDeletion` instead of relying on `MinLogNumber` to identify outdated WALs On recovery, we can compute `MinLogNumber()` based on the log numbers kept in MANIFEST, any log with number < MinLogNumber can be ignored. So it seems that we don't need to persist `WalDeletion` to MANIFEST, since we can ignore the WALs based on MinLogNumber. But the `MinLogNumber()` is actually a lower bound, it does not exactly mean that logs starting from MinLogNumber must exist. This is because in a corner case, when a column family is empty and never flushed, its log number is set to the largest log number, but not persisted in MANIFEST. So let's say there are 2 column families, when creating the DB, the first WAL has log number 1, so it's persisted to MANIFEST for both column families. Then CF 0 is empty and never flushed, CF 1 is updated and flushed, so a new WAL with log number 2 is created and persisted to MANIFEST for CF 1. But CF 0's log number in MANIFEST is still 1. So on recovery, MinLogNumber is 1, but since log 1 only contains data for CF 1, and CF 1 is flushed, log 1 might have already been deleted from disk. We can make `MinLogNumber()` be the exactly minimum log number that must exist, by persisting the most recent log number for empty column families that are not flushed. But if there are N such column families, then every time a new WAL is created, we need to add N records to MANIFEST. In current design, a record is persisted to MANIFEST only when WAL is created, closed, or deleted/archived, so the number of WAL related records are bounded to 3x number of WALs. 2. Why keep `WalSet` in `VersionSet` instead of applying the `VersionEdit`s to `VersionStorageInfo` `VersionEdit`s are originally designed to track the addition and deletion of SST files. The SST files are related to column families, each column family has a list of `Version`s, and each `Version` keeps the set of active SST files in `VersionStorageInfo`. But WALs are a concept of DB, they are not bounded to specific column families. So logically it does not make sense to store WALs in a column family's `Version`s. Also, `Version`'s purpose is to keep reference to SST / blob files, so that they are not deleted until there is no version referencing them. But a WAL is deleted regardless of version references. So we keep the WALs in `VersionSet` for the purpose of writing out the DB state's snapshot when creating new MANIFESTs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7164 Test Plan: make version_edit_test && ./version_edit_test make wal_edit_test && ./wal_edit_test Reviewed By: ltamasi Differential Revision: D22677936 Pulled By: cheng-chang fbshipit-source-id: 5a3b6890140e572ffd79eb37e6e4c3c32361a859
4 years ago
WalAdditions wal_additions_;
WalDeletion wal_deletion_;
Define WAL related classes to be used in VersionEdit and VersionSet (#7164) Summary: `WalAddition`, `WalDeletion` are defined in `wal_version.h` and used in `VersionEdit`. `WalAddition` is used to represent events of creating a new WAL (no size, just log number), or closing a WAL (with size). `WalDeletion` is used to represent events of deleting or archiving a WAL, it means the WAL is no longer alive (won't be replayed during recovery). `WalSet` is the set of alive WALs kept in `VersionSet`. 1. Why use `WalDeletion` instead of relying on `MinLogNumber` to identify outdated WALs On recovery, we can compute `MinLogNumber()` based on the log numbers kept in MANIFEST, any log with number < MinLogNumber can be ignored. So it seems that we don't need to persist `WalDeletion` to MANIFEST, since we can ignore the WALs based on MinLogNumber. But the `MinLogNumber()` is actually a lower bound, it does not exactly mean that logs starting from MinLogNumber must exist. This is because in a corner case, when a column family is empty and never flushed, its log number is set to the largest log number, but not persisted in MANIFEST. So let's say there are 2 column families, when creating the DB, the first WAL has log number 1, so it's persisted to MANIFEST for both column families. Then CF 0 is empty and never flushed, CF 1 is updated and flushed, so a new WAL with log number 2 is created and persisted to MANIFEST for CF 1. But CF 0's log number in MANIFEST is still 1. So on recovery, MinLogNumber is 1, but since log 1 only contains data for CF 1, and CF 1 is flushed, log 1 might have already been deleted from disk. We can make `MinLogNumber()` be the exactly minimum log number that must exist, by persisting the most recent log number for empty column families that are not flushed. But if there are N such column families, then every time a new WAL is created, we need to add N records to MANIFEST. In current design, a record is persisted to MANIFEST only when WAL is created, closed, or deleted/archived, so the number of WAL related records are bounded to 3x number of WALs. 2. Why keep `WalSet` in `VersionSet` instead of applying the `VersionEdit`s to `VersionStorageInfo` `VersionEdit`s are originally designed to track the addition and deletion of SST files. The SST files are related to column families, each column family has a list of `Version`s, and each `Version` keeps the set of active SST files in `VersionStorageInfo`. But WALs are a concept of DB, they are not bounded to specific column families. So logically it does not make sense to store WALs in a column family's `Version`s. Also, `Version`'s purpose is to keep reference to SST / blob files, so that they are not deleted until there is no version referencing them. But a WAL is deleted regardless of version references. So we keep the WALs in `VersionSet` for the purpose of writing out the DB state's snapshot when creating new MANIFESTs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7164 Test Plan: make version_edit_test && ./version_edit_test make wal_edit_test && ./wal_edit_test Reviewed By: ltamasi Differential Revision: D22677936 Pulled By: cheng-chang fbshipit-source-id: 5a3b6890140e572ffd79eb37e6e4c3c32361a859
4 years ago
// Each version edit record should have column_family_ set
// If it's not set, it is default (0)
uint32_t column_family_ = 0;
// a version edit can be either column_family add or
// column_family drop. If it's column family add,
// it also includes column family name.
bool is_column_family_drop_ = false;
bool is_column_family_add_ = false;
std::string column_family_name_;
bool is_in_atomic_group_ = false;
uint32_t remaining_entries_ = 0;
std::string full_history_ts_low_;
};
} // namespace ROCKSDB_NAMESPACE