You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
rocksdb/test_util/testutil.cc

739 lines
24 KiB

// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
//
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file. See the AUTHORS file for names of contributors.
#include "test_util/testutil.h"
#include <fcntl.h>
#include <sys/stat.h>
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
#include <array>
#include <cctype>
#include <fstream>
#include <sstream>
#include "db/memtable_list.h"
Introduce a new storage specific Env API (#5761) Summary: The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc. This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO. The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before. This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection. The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761 Differential Revision: D18868376 Pulled By: anand1976 fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
5 years ago
#include "env/composite_env_wrapper.h"
#include "file/random_access_file_reader.h"
#include "file/sequence_file_reader.h"
#include "file/writable_file_writer.h"
#include "port/port.h"
#include "rocksdb/convenience.h"
#include "rocksdb/system_clock.h"
#include "rocksdb/utilities/object_registry.h"
#include "test_util/mock_time_env.h"
#include "test_util/sync_point.h"
#include "util/random.h"
#ifndef ROCKSDB_UNITTESTS_WITH_CUSTOM_OBJECTS_FROM_STATIC_LIBS
void RegisterCustomObjects(int /*argc*/, char** /*argv*/) {}
#endif
namespace ROCKSDB_NAMESPACE {
namespace test {
const uint32_t kDefaultFormatVersion = BlockBasedTableOptions().format_version;
const std::set<uint32_t> kFooterFormatVersionsToTest{
5U,
// In case any interesting future changes
kDefaultFormatVersion,
kLatestFormatVersion,
};
std::string RandomKey(Random* rnd, int len, RandomKeyType type) {
// Make sure to generate a wide variety of characters so we
// test the boundary conditions for short-key optimizations.
static const char kTestChars[] = {'\0', '\1', 'a', 'b', 'c',
'd', 'e', '\xfd', '\xfe', '\xff'};
std::string result;
for (int i = 0; i < len; i++) {
std::size_t indx = 0;
switch (type) {
case RandomKeyType::RANDOM:
indx = rnd->Uniform(sizeof(kTestChars));
break;
case RandomKeyType::LARGEST:
indx = sizeof(kTestChars) - 1;
break;
case RandomKeyType::MIDDLE:
indx = sizeof(kTestChars) / 2;
break;
case RandomKeyType::SMALLEST:
indx = 0;
break;
}
result += kTestChars[indx];
}
return result;
}
extern Slice CompressibleString(Random* rnd, double compressed_fraction,
int len, std::string* dst) {
int raw = static_cast<int>(len * compressed_fraction);
if (raw < 1) raw = 1;
std::string raw_data = rnd->RandomString(raw);
// Duplicate the random data until we have filled "len" bytes
dst->clear();
while (dst->size() < (unsigned int)len) {
dst->append(raw_data);
}
dst->resize(len);
return Slice(*dst);
}
namespace {
class Uint64ComparatorImpl : public Comparator {
public:
Uint64ComparatorImpl() {}
const char* Name() const override { return "rocksdb.Uint64Comparator"; }
int Compare(const Slice& a, const Slice& b) const override {
assert(a.size() == sizeof(uint64_t) && b.size() == sizeof(uint64_t));
const uint64_t* left = reinterpret_cast<const uint64_t*>(a.data());
const uint64_t* right = reinterpret_cast<const uint64_t*>(b.data());
uint64_t leftValue;
uint64_t rightValue;
GetUnaligned(left, &leftValue);
GetUnaligned(right, &rightValue);
if (leftValue == rightValue) {
return 0;
} else if (leftValue < rightValue) {
return -1;
} else {
return 1;
}
}
void FindShortestSeparator(std::string* /*start*/,
const Slice& /*limit*/) const override {
return;
}
void FindShortSuccessor(std::string* /*key*/) const override { return; }
};
} // namespace
const Comparator* Uint64Comparator() {
static Uint64ComparatorImpl uint64comp;
return &uint64comp;
}
const Comparator* BytewiseComparatorWithU64TsWrapper() {
ConfigOptions config_options;
const Comparator* user_comparator = nullptr;
Status s = Comparator::CreateFromString(
config_options, "leveldb.BytewiseComparator.u64ts", &user_comparator);
s.PermitUncheckedError();
return user_comparator;
}
void CorruptKeyType(InternalKey* ikey) {
std::string keystr = ikey->Encode().ToString();
keystr[keystr.size() - 8] = kTypeLogData;
ikey->DecodeFrom(Slice(keystr.data(), keystr.size()));
}
Support for SingleDelete() Summary: This patch fixes #7460559. It introduces SingleDelete as a new database operation. This operation can be used to delete keys that were never overwritten (no put following another put of the same key). If an overwritten key is single deleted the behavior is undefined. Single deletion of a non-existent key has no effect but multiple consecutive single deletions are not allowed (see limitations). In contrast to the conventional Delete() operation, the deletion entry is removed along with the value when the two are lined up in a compaction. Note: The semantics are similar to @igor's prototype that allowed to have this behavior on the granularity of a column family ( https://reviews.facebook.net/D42093 ). This new patch, however, is more aggressive when it comes to removing tombstones: It removes the SingleDelete together with the value whenever there is no snapshot between them while the older patch only did this when the sequence number of the deletion was older than the earliest snapshot. Most of the complex additions are in the Compaction Iterator, all other changes should be relatively straightforward. The patch also includes basic support for single deletions in db_stress and db_bench. Limitations: - Not compatible with cuckoo hash tables - Single deletions cannot be used in combination with merges and normal deletions on the same key (other keys are not affected by this) - Consecutive single deletions are currently not allowed (and older version of this patch supported this so it could be resurrected if needed) Test Plan: make all check Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor Reviewed By: igor Subscribers: maykov, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D43179
9 years ago
std::string KeyStr(const std::string& user_key, const SequenceNumber& seq,
const ValueType& t, bool corrupt) {
InternalKey k(user_key, seq, t);
if (corrupt) {
CorruptKeyType(&k);
}
return k.Encode().ToString();
}
Allow compaction iterator to perform garbage collection (#7556) Summary: Add a threshold timestamp, full_history_ts_low_ of type `std::string*` to `CompactionIterator`, so that RocksDB can also perform garbage collection during compaction. * If full_history_ts_low_ is nullptr, then compaction iterator does not perform GC, preserving all timestamp history for all keys. Compaction iterator will treat user key with different timestamps as different user keys. * If full_history_ts_low_ is not nullptr, then compaction iterator performs GC. GC will look at keys older than `*full_history_ts_low_` and determine their eligibility based on factors including snapshots. Current rules of GC: * If an internal key is in the same snapshot as a previous counterpart with the same user key, and this key is eligible for GC, and the key is not single-delete or merge operand, then this key can be dropped. Note that the previous internal key cannot be a merge operand either. * If a tombstone is the most recent one in the earliest snapshot and it is eligible for GC, and keyNotExistsBeyondLevel() is true, then this tombstone can be dropped. * If a tombstone is the most recent one in a snapshot and it is eligible for GC, and the compaction is at bottommost level, then all other older internal keys of the same user key must also be eligible for GC, thus can be dropped * Single-delete, delete-range and merge are not currently supported. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7556 Test Plan: make check Reviewed By: ltamasi Differential Revision: D24507728 Pulled By: riversand963 fbshipit-source-id: 3c09c7301f41eed76dfcf4d1527e68cf6e0a8bb3
4 years ago
std::string KeyStr(uint64_t ts, const std::string& user_key,
const SequenceNumber& seq, const ValueType& t,
bool corrupt) {
std::string user_key_with_ts(user_key);
std::string ts_str;
PutFixed64(&ts_str, ts);
user_key_with_ts.append(ts_str);
return KeyStr(user_key_with_ts, seq, t, corrupt);
}
bool SleepingBackgroundTask::TimedWaitUntilSleeping(uint64_t wait_time) {
auto abs_time = SystemClock::Default()->NowMicros() + wait_time;
MutexLock l(&mutex_);
while (!sleeping_ || !should_sleep_) {
if (bg_cv_.TimedWait(abs_time)) {
return true;
}
}
return false;
}
bool SleepingBackgroundTask::TimedWaitUntilDone(uint64_t wait_time) {
auto abs_time = SystemClock::Default()->NowMicros() + wait_time;
MutexLock l(&mutex_);
while (!done_with_sleep_) {
if (bg_cv_.TimedWait(abs_time)) {
return true;
}
}
return false;
}
std::string RandomName(Random* rnd, const size_t len) {
std::stringstream ss;
for (size_t i = 0; i < len; ++i) {
ss << static_cast<char>(rnd->Uniform(26) + 'a');
}
return ss.str();
}
CompressionType RandomCompressionType(Random* rnd) {
auto ret = static_cast<CompressionType>(rnd->Uniform(6));
while (!CompressionTypeSupported(ret)) {
ret = static_cast<CompressionType>((static_cast<int>(ret) + 1) % 6);
}
return ret;
}
void RandomCompressionTypeVector(const size_t count,
std::vector<CompressionType>* types,
Random* rnd) {
types->clear();
for (size_t i = 0; i < count; ++i) {
types->emplace_back(RandomCompressionType(rnd));
}
}
const SliceTransform* RandomSliceTransform(Random* rnd, int pre_defined) {
int random_num = pre_defined >= 0 ? pre_defined : rnd->Uniform(4);
switch (random_num) {
case 0:
return NewFixedPrefixTransform(rnd->Uniform(20) + 1);
case 1:
return NewCappedPrefixTransform(rnd->Uniform(20) + 1);
case 2:
return NewNoopTransform();
default:
return nullptr;
}
}
BlockBasedTableOptions RandomBlockBasedTableOptions(Random* rnd) {
BlockBasedTableOptions opt;
opt.cache_index_and_filter_blocks = rnd->Uniform(2);
opt.pin_l0_filter_and_index_blocks_in_cache = rnd->Uniform(2);
opt.pin_top_level_index_and_filter = rnd->Uniform(2);
Add an option to put first key of each sst block in the index (#5289) Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
using IndexType = BlockBasedTableOptions::IndexType;
const std::array<IndexType, 4> index_types = {
{IndexType::kBinarySearch, IndexType::kHashSearch,
IndexType::kTwoLevelIndexSearch, IndexType::kBinarySearchWithFirstKey}};
opt.index_type =
index_types[rnd->Uniform(static_cast<int>(index_types.size()))];
opt.checksum = static_cast<ChecksumType>(rnd->Uniform(3));
opt.block_size = rnd->Uniform(10000000);
opt.block_size_deviation = rnd->Uniform(100);
opt.block_restart_interval = rnd->Uniform(100);
opt.index_block_restart_interval = rnd->Uniform(100);
opt.whole_key_filtering = rnd->Uniform(2);
return opt;
}
TableFactory* RandomTableFactory(Random* rnd, int pre_defined) {
#ifndef ROCKSDB_LITE
int random_num = pre_defined >= 0 ? pre_defined : rnd->Uniform(4);
switch (random_num) {
case 0:
return NewPlainTableFactory();
case 1:
return NewCuckooTableFactory();
default:
return NewBlockBasedTableFactory();
}
#else
(void)rnd;
(void)pre_defined;
return NewBlockBasedTableFactory();
#endif // !ROCKSDB_LITE
}
MergeOperator* RandomMergeOperator(Random* rnd) {
return new ChanglingMergeOperator(RandomName(rnd, 10));
}
CompactionFilter* RandomCompactionFilter(Random* rnd) {
return new ChanglingCompactionFilter(RandomName(rnd, 10));
}
CompactionFilterFactory* RandomCompactionFilterFactory(Random* rnd) {
return new ChanglingCompactionFilterFactory(RandomName(rnd, 10));
}
void RandomInitDBOptions(DBOptions* db_opt, Random* rnd) {
// boolean options
db_opt->advise_random_on_open = rnd->Uniform(2);
db_opt->allow_mmap_reads = rnd->Uniform(2);
db_opt->allow_mmap_writes = rnd->Uniform(2);
db_opt->use_direct_reads = rnd->Uniform(2);
db_opt->use_direct_io_for_flush_and_compaction = rnd->Uniform(2);
db_opt->create_if_missing = rnd->Uniform(2);
db_opt->create_missing_column_families = rnd->Uniform(2);
db_opt->enable_thread_tracking = rnd->Uniform(2);
db_opt->error_if_exists = rnd->Uniform(2);
db_opt->is_fd_close_on_exec = rnd->Uniform(2);
db_opt->paranoid_checks = rnd->Uniform(2);
db_opt->track_and_verify_wals_in_manifest = rnd->Uniform(2);
db_opt->verify_sst_unique_id_in_manifest = rnd->Uniform(2);
db_opt->skip_stats_update_on_db_open = rnd->Uniform(2);
db_opt->skip_checking_sst_file_sizes_on_db_open = rnd->Uniform(2);
db_opt->use_adaptive_mutex = rnd->Uniform(2);
db_opt->use_fsync = rnd->Uniform(2);
db_opt->recycle_log_file_num = rnd->Uniform(2);
db_opt->avoid_flush_during_recovery = rnd->Uniform(2);
db_opt->avoid_flush_during_shutdown = rnd->Uniform(2);
db_opt->enforce_single_del_contracts = rnd->Uniform(2);
// int options
db_opt->max_background_compactions = rnd->Uniform(100);
db_opt->max_background_flushes = rnd->Uniform(100);
db_opt->max_file_opening_threads = rnd->Uniform(100);
db_opt->max_open_files = rnd->Uniform(100);
db_opt->table_cache_numshardbits = rnd->Uniform(100);
// size_t options
db_opt->db_write_buffer_size = rnd->Uniform(10000);
db_opt->keep_log_file_num = rnd->Uniform(10000);
db_opt->log_file_time_to_roll = rnd->Uniform(10000);
db_opt->manifest_preallocation_size = rnd->Uniform(10000);
db_opt->max_log_file_size = rnd->Uniform(10000);
// std::string options
db_opt->db_log_dir = "path/to/db_log_dir";
db_opt->wal_dir = "path/to/wal_dir";
// uint32_t options
db_opt->max_subcompactions = rnd->Uniform(100000);
// uint64_t options
static const uint64_t uint_max = static_cast<uint64_t>(UINT_MAX);
db_opt->WAL_size_limit_MB = uint_max + rnd->Uniform(100000);
db_opt->WAL_ttl_seconds = uint_max + rnd->Uniform(100000);
db_opt->bytes_per_sync = uint_max + rnd->Uniform(100000);
db_opt->delayed_write_rate = uint_max + rnd->Uniform(100000);
db_opt->delete_obsolete_files_period_micros = uint_max + rnd->Uniform(100000);
db_opt->max_manifest_file_size = uint_max + rnd->Uniform(100000);
db_opt->max_total_wal_size = uint_max + rnd->Uniform(100000);
db_opt->wal_bytes_per_sync = uint_max + rnd->Uniform(100000);
// unsigned int options
db_opt->stats_dump_period_sec = rnd->Uniform(100000);
}
void RandomInitCFOptions(ColumnFamilyOptions* cf_opt, DBOptions& db_options,
Random* rnd) {
cf_opt->compaction_style = (CompactionStyle)(rnd->Uniform(4));
// boolean options
cf_opt->report_bg_io_stats = rnd->Uniform(2);
cf_opt->disable_auto_compactions = rnd->Uniform(2);
cf_opt->inplace_update_support = rnd->Uniform(2);
cf_opt->level_compaction_dynamic_level_bytes = rnd->Uniform(2);
cf_opt->optimize_filters_for_hits = rnd->Uniform(2);
cf_opt->paranoid_file_checks = rnd->Uniform(2);
cf_opt->force_consistency_checks = rnd->Uniform(2);
cf_opt->compaction_options_fifo.allow_compaction = rnd->Uniform(2);
cf_opt->memtable_whole_key_filtering = rnd->Uniform(2);
cf_opt->enable_blob_files = rnd->Uniform(2);
cf_opt->enable_blob_garbage_collection = rnd->Uniform(2);
// double options
cf_opt->memtable_prefix_bloom_size_ratio =
static_cast<double>(rnd->Uniform(10000)) / 20000.0;
cf_opt->blob_garbage_collection_age_cutoff = rnd->Uniform(10000) / 10000.0;
Make it possible to force the garbage collection of the oldest blob files (#8994) Summary: The current BlobDB garbage collection logic works by relocating the valid blobs from the oldest blob files as they are encountered during compaction, and cleaning up blob files once they contain nothing but garbage. However, with sufficiently skewed workloads, it is theoretically possible to end up in a situation when few or no compactions get scheduled for the SST files that contain references to the oldest blob files, which can lead to increased space amp due to the lack of GC. In order to efficiently handle such workloads, the patch adds a new BlobDB configuration option called `blob_garbage_collection_force_threshold`, which signals to BlobDB to schedule targeted compactions for the SST files that keep alive the oldest batch of blob files if the overall ratio of garbage in the given blob files meets the threshold *and* all the given blob files are eligible for GC based on `blob_garbage_collection_age_cutoff`. (For example, if the new option is set to 0.9, targeted compactions will get scheduled if the sum of garbage bytes meets or exceeds 90% of the sum of total bytes in the oldest blob files, assuming all affected blob files are below the age-based cutoff.) The net result of these targeted compactions is that the valid blobs in the oldest blob files are relocated and the oldest blob files themselves cleaned up (since *all* SST files that rely on them get compacted away). These targeted compactions are similar to periodic compactions in the sense that they force certain SST files that otherwise would not get picked up to undergo compaction and also in the sense that instead of merging files from multiple levels, they target a single file. (Note: such compactions might still include neighboring files from the same level due to the need of having a "clean cut" boundary but they never include any files from any other level.) This functionality is currently only supported with the leveled compaction style and is inactive by default (since the default value is set to 1.0, i.e. 100%). Pull Request resolved: https://github.com/facebook/rocksdb/pull/8994 Test Plan: Ran `make check` and tested using `db_bench` and the stress/crash tests. Reviewed By: riversand963 Differential Revision: D31489850 Pulled By: ltamasi fbshipit-source-id: 44057d511726a0e2a03c5d9313d7511b3f0c4eab
3 years ago
cf_opt->blob_garbage_collection_force_threshold =
rnd->Uniform(10000) / 10000.0;
// int options
cf_opt->level0_file_num_compaction_trigger = rnd->Uniform(100);
cf_opt->level0_slowdown_writes_trigger = rnd->Uniform(100);
cf_opt->level0_stop_writes_trigger = rnd->Uniform(100);
cf_opt->max_bytes_for_level_multiplier = rnd->Uniform(100);
cf_opt->max_write_buffer_number = rnd->Uniform(100);
cf_opt->max_write_buffer_number_to_maintain = rnd->Uniform(100);
Refactor trimming logic for immutable memtables (#5022) Summary: MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory. We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one. The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming. In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022 Differential Revision: D14394062 Pulled By: miasantreble fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
5 years ago
cf_opt->max_write_buffer_size_to_maintain = rnd->Uniform(10000);
cf_opt->min_write_buffer_number_to_merge = rnd->Uniform(100);
cf_opt->num_levels = rnd->Uniform(100);
cf_opt->target_file_size_multiplier = rnd->Uniform(100);
// vector int options
cf_opt->max_bytes_for_level_multiplier_additional.resize(cf_opt->num_levels);
for (int i = 0; i < cf_opt->num_levels; i++) {
cf_opt->max_bytes_for_level_multiplier_additional[i] = rnd->Uniform(100);
}
// size_t options
cf_opt->arena_block_size = rnd->Uniform(10000);
cf_opt->inplace_update_num_locks = rnd->Uniform(10000);
cf_opt->max_successive_merges = rnd->Uniform(10000);
cf_opt->memtable_huge_page_size = rnd->Uniform(10000);
cf_opt->write_buffer_size = rnd->Uniform(10000);
// uint32_t options
cf_opt->bloom_locality = rnd->Uniform(10000);
cf_opt->max_bytes_for_level_base = rnd->Uniform(10000);
// uint64_t options
static const uint64_t uint_max = static_cast<uint64_t>(UINT_MAX);
cf_opt->ttl =
db_options.max_open_files == -1 ? uint_max + rnd->Uniform(10000) : 0;
cf_opt->periodic_compaction_seconds =
db_options.max_open_files == -1 ? uint_max + rnd->Uniform(10000) : 0;
cf_opt->max_sequential_skip_in_iterations = uint_max + rnd->Uniform(10000);
cf_opt->target_file_size_base = uint_max + rnd->Uniform(10000);
cf_opt->max_compaction_bytes =
cf_opt->target_file_size_base * rnd->Uniform(100);
cf_opt->compaction_options_fifo.max_table_files_size =
uint_max + rnd->Uniform(10000);
cf_opt->min_blob_size = uint_max + rnd->Uniform(10000);
cf_opt->blob_file_size = uint_max + rnd->Uniform(10000);
cf_opt->blob_compaction_readahead_size = uint_max + rnd->Uniform(10000);
// pointer typed options
cf_opt->prefix_extractor.reset(RandomSliceTransform(rnd));
cf_opt->table_factory.reset(RandomTableFactory(rnd));
cf_opt->merge_operator.reset(RandomMergeOperator(rnd));
if (cf_opt->compaction_filter) {
delete cf_opt->compaction_filter;
}
cf_opt->compaction_filter = RandomCompactionFilter(rnd);
cf_opt->compaction_filter_factory.reset(RandomCompactionFilterFactory(rnd));
// custom typed options
cf_opt->compression = RandomCompressionType(rnd);
RandomCompressionTypeVector(cf_opt->num_levels,
&cf_opt->compression_per_level, rnd);
cf_opt->blob_compression_type = RandomCompressionType(rnd);
}
bool IsDirectIOSupported(Env* env, const std::string& dir) {
EnvOptions env_options;
env_options.use_mmap_writes = false;
env_options.use_direct_writes = true;
std::string tmp = TempFileName(dir, 999);
Status s;
{
std::unique_ptr<WritableFile> file;
s = env->NewWritableFile(tmp, &file, env_options);
}
if (s.ok()) {
s = env->DeleteFile(tmp);
}
return s.ok();
}
Create a CustomEnv class; Add WinFileSystem; Make LegacyFileSystemWrapper private (#7703) Summary: This PR does the following: -> Creates a WinFileSystem class. This class is the Windows equivalent of the PosixFileSystem and will be used on Windows systems. -> Introduces a CustomEnv class. A CustomEnv is an Env that takes a FileSystem as constructor argument. I believe there will only ever be two implementations of this class (PosixEnv and WinEnv). There is still a CustomEnvWrapper class that takes an Env and a FileSystem and wraps the Env calls with the input Env but uses the FileSystem for the FileSystem calls -> Eliminates the public uses of the LegacyFileSystemWrapper. With this change in place, there are effectively the following patterns of Env: - "Base Env classes" (PosixEnv, WinEnv). These classes implement the core Env functions (e.g. Threads) and have a hard-coded input FileSystem. These classes inherit from CompositeEnv, implement the core Env functions (threads) and delegate the FileSystem-like calls to the input file system. - Wrapped Composite Env classes (MemEnv). These classes take in an Env and a FileSystem. The core env functions are re-directed to the wrapped env. The file system calls are redirected to the input file system - Legacy Wrapped Env classes. These classes take in an Env input (but no FileSystem). The core env functions are re-directed to the wrapped env. A "Legacy File System" is created using this env and the file system calls directed to the env itself. With these changes in place, the PosixEnv becomes a singleton -- there is only ever one created. Any other use of the PosixEnv is via another wrapped env. This cleans up some of the issues with the env construction and destruction. Additionally, there were places in the code that required had an Env when they required a FileSystem. Many of these places would wrap the Env with a LegacyFileSystemWrapper instead of using the env->GetFileSystem(). These places were changed, thereby removing layers of additional redirection (LegacyFileSystem --> Env --> Env::FileSystem). Pull Request resolved: https://github.com/facebook/rocksdb/pull/7703 Reviewed By: zhichao-cao Differential Revision: D25762190 Pulled By: anand1976 fbshipit-source-id: 1a088e97fc916f28ac69c149cd1dcad0ab31704b
4 years ago
bool IsPrefetchSupported(const std::shared_ptr<FileSystem>& fs,
const std::string& dir) {
bool supported = false;
std::string tmp = TempFileName(dir, 999);
Random rnd(301);
std::string test_string = rnd.RandomString(4096);
Slice data(test_string);
Status s = WriteStringToFile(fs.get(), data, tmp, true);
if (s.ok()) {
std::unique_ptr<FSRandomAccessFile> file;
auto io_s = fs->NewRandomAccessFile(tmp, FileOptions(), &file, nullptr);
if (io_s.ok()) {
supported = !(file->Prefetch(0, data.size(), IOOptions(), nullptr)
.IsNotSupported());
}
s = fs->DeleteFile(tmp, IOOptions(), nullptr);
}
return s.ok() && supported;
}
size_t GetLinesCount(const std::string& fname, const std::string& pattern) {
std::stringstream ssbuf;
std::string line;
size_t count = 0;
std::ifstream inFile(fname.c_str());
ssbuf << inFile.rdbuf();
while (getline(ssbuf, line)) {
if (line.find(pattern) != std::string::npos) {
count++;
}
}
return count;
}
Fix many tests to run with MEM_ENV and ENCRYPTED_ENV; Introduce a MemoryFileSystem class (#7566) Summary: This PR does a few things: 1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation. 2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed: - The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated - The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory). 3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10). I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged. Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently. Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :) Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566 Reviewed By: zhichao-cao Differential Revision: D24408980 Pulled By: jay-zhuang fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
4 years ago
Status CorruptFile(Env* env, const std::string& fname, int offset,
int bytes_to_corrupt, bool verify_checksum /*=true*/) {
uint64_t size;
Status s = env->GetFileSize(fname, &size);
if (!s.ok()) {
return s;
} else if (offset < 0) {
// Relative to end of file; make it absolute
Fix many tests to run with MEM_ENV and ENCRYPTED_ENV; Introduce a MemoryFileSystem class (#7566) Summary: This PR does a few things: 1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation. 2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed: - The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated - The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory). 3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10). I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged. Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently. Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :) Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566 Reviewed By: zhichao-cao Differential Revision: D24408980 Pulled By: jay-zhuang fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
4 years ago
if (-offset > static_cast<int>(size)) {
offset = 0;
} else {
Fix many tests to run with MEM_ENV and ENCRYPTED_ENV; Introduce a MemoryFileSystem class (#7566) Summary: This PR does a few things: 1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation. 2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed: - The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated - The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory). 3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10). I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged. Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently. Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :) Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566 Reviewed By: zhichao-cao Differential Revision: D24408980 Pulled By: jay-zhuang fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
4 years ago
offset = static_cast<int>(size + offset);
}
}
Fix many tests to run with MEM_ENV and ENCRYPTED_ENV; Introduce a MemoryFileSystem class (#7566) Summary: This PR does a few things: 1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation. 2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed: - The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated - The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory). 3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10). I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged. Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently. Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :) Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566 Reviewed By: zhichao-cao Differential Revision: D24408980 Pulled By: jay-zhuang fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
4 years ago
if (offset > static_cast<int>(size)) {
offset = static_cast<int>(size);
}
Fix many tests to run with MEM_ENV and ENCRYPTED_ENV; Introduce a MemoryFileSystem class (#7566) Summary: This PR does a few things: 1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation. 2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed: - The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated - The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory). 3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10). I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged. Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently. Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :) Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566 Reviewed By: zhichao-cao Differential Revision: D24408980 Pulled By: jay-zhuang fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
4 years ago
if (offset + bytes_to_corrupt > static_cast<int>(size)) {
bytes_to_corrupt = static_cast<int>(size - offset);
}
// Do it
std::string contents;
Fix many tests to run with MEM_ENV and ENCRYPTED_ENV; Introduce a MemoryFileSystem class (#7566) Summary: This PR does a few things: 1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation. 2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed: - The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated - The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory). 3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10). I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged. Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently. Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :) Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566 Reviewed By: zhichao-cao Differential Revision: D24408980 Pulled By: jay-zhuang fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
4 years ago
s = ReadFileToString(env, fname, &contents);
if (s.ok()) {
for (int i = 0; i < bytes_to_corrupt; i++) {
contents[i + offset] ^= 0x80;
}
s = WriteStringToFile(env, contents, fname);
}
Fix many tests to run with MEM_ENV and ENCRYPTED_ENV; Introduce a MemoryFileSystem class (#7566) Summary: This PR does a few things: 1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation. 2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed: - The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated - The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory). 3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10). I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged. Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently. Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :) Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566 Reviewed By: zhichao-cao Differential Revision: D24408980 Pulled By: jay-zhuang fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
4 years ago
if (s.ok() && verify_checksum) {
#ifndef ROCKSDB_LITE
Fix many tests to run with MEM_ENV and ENCRYPTED_ENV; Introduce a MemoryFileSystem class (#7566) Summary: This PR does a few things: 1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation. 2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed: - The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated - The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory). 3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10). I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged. Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently. Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :) Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566 Reviewed By: zhichao-cao Differential Revision: D24408980 Pulled By: jay-zhuang fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
4 years ago
Options options;
options.env = env;
EnvOptions env_options;
Status v = VerifySstFileChecksum(options, env_options, fname);
assert(!v.ok());
#endif
Fix many tests to run with MEM_ENV and ENCRYPTED_ENV; Introduce a MemoryFileSystem class (#7566) Summary: This PR does a few things: 1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation. 2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed: - The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated - The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory). 3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10). I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged. Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently. Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :) Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566 Reviewed By: zhichao-cao Differential Revision: D24408980 Pulled By: jay-zhuang fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
4 years ago
}
return s;
}
Status TruncateFile(Env* env, const std::string& fname, uint64_t new_length) {
uint64_t old_length;
Status s = env->GetFileSize(fname, &old_length);
if (!s.ok() || new_length == old_length) {
return s;
}
// Do it
std::string contents;
s = ReadFileToString(env, fname, &contents);
if (s.ok()) {
contents.resize(static_cast<size_t>(new_length), 'b');
s = WriteStringToFile(env, contents, fname);
}
return s;
}
// Try and delete a directory if it exists
Status TryDeleteDir(Env* env, const std::string& dirname) {
bool is_dir = false;
Status s = env->IsDirectory(dirname, &is_dir);
if (s.ok() && is_dir) {
s = env->DeleteDir(dirname);
}
return s;
}
// Delete a directory if it exists
void DeleteDir(Env* env, const std::string& dirname) {
TryDeleteDir(env, dirname).PermitUncheckedError();
}
Status CreateEnvFromSystem(const ConfigOptions& config_options, Env** result,
std::shared_ptr<Env>* guard) {
const char* env_uri = getenv("TEST_ENV_URI");
const char* fs_uri = getenv("TEST_FS_URI");
if (env_uri || fs_uri) {
return Env::CreateFromUri(config_options,
(env_uri != nullptr) ? env_uri : "",
(fs_uri != nullptr) ? fs_uri : "", result, guard);
} else {
// Neither specified. Use the default
*result = config_options.env;
guard->reset();
return Status::OK();
}
}
namespace {
// A hacky skip list mem table that triggers flush after number of entries.
class SpecialMemTableRep : public MemTableRep {
public:
explicit SpecialMemTableRep(Allocator* allocator, MemTableRep* memtable,
int num_entries_flush)
: MemTableRep(allocator),
memtable_(memtable),
num_entries_flush_(num_entries_flush),
num_entries_(0) {}
virtual KeyHandle Allocate(const size_t len, char** buf) override {
return memtable_->Allocate(len, buf);
}
// Insert key into the list.
// REQUIRES: nothing that compares equal to key is currently in the list.
virtual void Insert(KeyHandle handle) override {
num_entries_++;
memtable_->Insert(handle);
}
void InsertConcurrently(KeyHandle handle) override {
num_entries_++;
memtable_->Insert(handle);
}
// Returns true iff an entry that compares equal to key is in the list.
virtual bool Contains(const char* key) const override {
return memtable_->Contains(key);
}
virtual size_t ApproximateMemoryUsage() override {
// Return a high memory usage when number of entries exceeds the threshold
// to trigger a flush.
return (num_entries_ < num_entries_flush_) ? 0 : 1024 * 1024 * 1024;
}
virtual void Get(const LookupKey& k, void* callback_args,
bool (*callback_func)(void* arg,
const char* entry)) override {
memtable_->Get(k, callback_args, callback_func);
}
uint64_t ApproximateNumEntries(const Slice& start_ikey,
const Slice& end_ikey) override {
return memtable_->ApproximateNumEntries(start_ikey, end_ikey);
}
virtual MemTableRep::Iterator* GetIterator(Arena* arena = nullptr) override {
return memtable_->GetIterator(arena);
}
virtual ~SpecialMemTableRep() override {}
private:
std::unique_ptr<MemTableRep> memtable_;
int num_entries_flush_;
int num_entries_;
};
class SpecialSkipListFactory : public MemTableRepFactory {
public:
#ifndef ROCKSDB_LITE
static bool Register(ObjectLibrary& library, const std::string& /*arg*/) {
library.AddFactory<MemTableRepFactory>(
ObjectLibrary::PatternEntry(SpecialSkipListFactory::kClassName(), true)
.AddNumber(":"),
[](const std::string& uri, std::unique_ptr<MemTableRepFactory>* guard,
std::string* /* errmsg */) {
auto colon = uri.find(":");
if (colon != std::string::npos) {
auto count = ParseInt(uri.substr(colon + 1));
guard->reset(new SpecialSkipListFactory(count));
} else {
guard->reset(new SpecialSkipListFactory(2));
}
return guard->get();
});
return true;
}
#endif // ROCKSDB_LITE
// After number of inserts exceeds `num_entries_flush` in a mem table, trigger
// flush.
explicit SpecialSkipListFactory(int num_entries_flush)
: num_entries_flush_(num_entries_flush) {}
using MemTableRepFactory::CreateMemTableRep;
virtual MemTableRep* CreateMemTableRep(
const MemTableRep::KeyComparator& compare, Allocator* allocator,
const SliceTransform* transform, Logger* /*logger*/) override {
return new SpecialMemTableRep(
allocator,
factory_.CreateMemTableRep(compare, allocator, transform, nullptr),
num_entries_flush_);
}
static const char* kClassName() { return "SpecialSkipListFactory"; }
virtual const char* Name() const override { return kClassName(); }
std::string GetId() const override {
std::string id = Name();
if (num_entries_flush_ > 0) {
id.append(":").append(std::to_string(num_entries_flush_));
}
return id;
}
bool IsInsertConcurrentlySupported() const override {
return factory_.IsInsertConcurrentlySupported();
}
private:
SkipListFactory factory_;
int num_entries_flush_;
};
} // namespace
MemTableRepFactory* NewSpecialSkipListFactory(int num_entries_per_flush) {
RegisterTestLibrary();
return new SpecialSkipListFactory(num_entries_per_flush);
}
#ifndef ROCKSDB_LITE
// This method loads existing test classes into the ObjectRegistry
int RegisterTestObjects(ObjectLibrary& library, const std::string& arg) {
size_t num_types;
library.AddFactory<const Comparator>(
test::SimpleSuffixReverseComparator::kClassName(),
[](const std::string& /*uri*/,
std::unique_ptr<const Comparator>* /*guard*/,
std::string* /* errmsg */) {
static test::SimpleSuffixReverseComparator ssrc;
return &ssrc;
});
SpecialSkipListFactory::Register(library, arg);
library.AddFactory<MergeOperator>(
"Changling",
[](const std::string& uri, std::unique_ptr<MergeOperator>* guard,
std::string* /* errmsg */) {
guard->reset(new test::ChanglingMergeOperator(uri));
return guard->get();
});
library.AddFactory<CompactionFilter>(
"Changling",
[](const std::string& uri, std::unique_ptr<CompactionFilter>* /*guard*/,
std::string* /* errmsg */) {
return new test::ChanglingCompactionFilter(uri);
});
library.AddFactory<CompactionFilterFactory>(
"Changling", [](const std::string& uri,
std::unique_ptr<CompactionFilterFactory>* guard,
std::string* /* errmsg */) {
guard->reset(new test::ChanglingCompactionFilterFactory(uri));
return guard->get();
});
library.AddFactory<SystemClock>(
MockSystemClock::kClassName(),
[](const std::string& /*uri*/, std::unique_ptr<SystemClock>* guard,
std::string* /* errmsg */) {
guard->reset(new MockSystemClock(SystemClock::Default()));
return guard->get();
});
return static_cast<int>(library.GetFactoryCount(&num_types));
}
#endif // ROCKSDB_LITE
void RegisterTestLibrary(const std::string& arg) {
static bool registered = false;
if (!registered) {
registered = true;
#ifndef ROCKSDB_LITE
ObjectRegistry::Default()->AddLibrary("test", RegisterTestObjects, arg);
#else
(void)arg;
#endif // ROCKSDB_LITE
}
}
} // namespace test
} // namespace ROCKSDB_NAMESPACE