Summary:
See https://github.com/facebook/rocksdb/issues/10082 for more details. Trivial move
isn't done for universal when compaction is from L0 into L0. So a too small value for
num_levels with db_bench means there will be fewer trivial moves with universal and
that means that write-amp will increase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10158
Test Plan: run it
Reviewed By: siying
Differential Revision: D37122519
Pulled By: mdcallag
fbshipit-source-id: 1cb39049676f68a6cc3ea8d105a9965f89d4d09e
Summary:
auto_prefix_mode is designed to use prefix filtering in a
particular "safe" set of cases where the upper bound and the seek key
have different prefixes: where the upper bound is the "same length
immediate successor". These conditions are not sufficient to guarantee
the same iteration results as total_order_seek if the DB contains
"short" keys, less than the "full" (maximum) prefix length.
We are not simply disabling the optimization in these successor cases
because it is likely that users are essentially getting what they want
out of existing usage. Especially if users are constructing successor
bounds with the intention of doing a prefix-bounded seek, the existing
behavior is more expected than the total_order_seek behavior.
Consequently, for now we reconcile the bad specification of behavior by
documenting the existing mismatch with total_order_seek.
A closely related issue affects hypothetical comparators like
ReverseBytewiseComparator: if they "correctly" implement
IsSameLengthImmediateSuccessor, auto_prefix_mode could omit more
entries (other than "short" keys noted above). Luckily, the built-in
ReverseBytewiseComparator has an "incorrect" implementation of
IsSameLengthImmediateSuccessor that effectively prevents prefix
optimization and, thus, the bug. This is now documented as a new
constraint on IsSameLengthImmediateSuccessor, and the implementation
tweaked to be simply "safe" rather than "incorrect".
This change also includes unit test updates to demonstrate the above
issues. (Test was cleaned up for readability and simplicity.)
Intended follow-up:
* Tweak documented axioms for prefix_extractor (more details then)
* Consider some sort of fix for this case. I don't know what that would
look like without breaking the performance of existing code. Perhaps
if all keys in an SST file have prefixes that are "full length," we can track
that fact and use it to allow optimization with the "same length
immediate successor", but that would only apply to new files.
* Consider a better system of specifying prefix bounds
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10144
Test Plan: test updates included
Reviewed By: siying
Differential Revision: D37052710
Pulled By: pdillinger
fbshipit-source-id: 5f63b7d65f3f214e4b143e0f9aa1749527c587db
Summary:
FastLRUCache now only supports 16B keys. The tests have changed to reflect this.
Because the unit tests were designed for caches that accept any string as keys, some tests are no longer compatible with FastLRUCache. We have disabled those for runs with FastLRUCache. (We could potentially change all tests to use 16B keys, but we don't because the cache public API does not require this.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10137
Test Plan: make -j24 check
Reviewed By: gitbw95
Differential Revision: D37083934
Pulled By: guidotag
fbshipit-source-id: be1719cf5f8364a9a32bc4555bce1a0de3833b0d
Summary:
Right now with mmap file, we don't run fadvise following users' requests. There is no reason for that so this diff does that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10142
Test Plan:
A simple readrandom against files with page cache dropped shows latency improvement from 7.8 us to 2.8:
./db_bench -use_existing_db --benchmarks=readrandom --num=100
Reviewed By: anand1976
Differential Revision: D37074975
fbshipit-source-id: ccc72bcac1b5fd634eb8fa2b6a5d9afe332e0bf6
Summary:
In RocksDB, keys are associated with (internal) sequence numbers which denote when the keys are written
to the database. Sequence numbers in different RocksDB instances are unrelated, thus not comparable.
It is nice if we can associate sequence numbers with their corresponding actual timestamps. One thing we can
do is to support user-defined timestamp, which allows the applications to specify the format of custom timestamps
and encode a timestamp with each key. More details can be found at https://github.com/facebook/rocksdb/wiki/User-defined-Timestamp-%28Experimental%29.
This PR provides a different but complementary approach. We can associate rocksdb snapshots (defined in
https://github.com/facebook/rocksdb/blob/7.2.fb/include/rocksdb/snapshot.h#L20) with **user-specified** timestamps.
Since a snapshot is essentially an object representing a sequence number, this PR establishes a bi-directional mapping between sequence numbers and timestamps.
In the past, snapshots are usually taken by readers. The current super-version is grabbed, and a `rocksdb::Snapshot`
object is created with the last published sequence number of the super-version. You can see that the reader actually
has no good idea of what timestamp to assign to this snapshot, because by the time the `GetSnapshot()` is called,
an arbitrarily long period of time may have already elapsed since the last write, which is when the last published
sequence number is written.
This observation motivates the creation of "timestamped" snapshots on the write path. Currently, this functionality is
exposed only to the layer of `TransactionDB`. Application can tell RocksDB to create a snapshot when a transaction
commits, effectively associating the last sequence number with a timestamp. It is also assumed that application will
ensure any two snapshots with timestamps should satisfy the following:
```
snapshot1.seq < snapshot2.seq iff. snapshot1.ts < snapshot2.ts
```
If the application can guarantee that when a reader takes a timestamped snapshot, there is no active writes going on
in the database, then we also allow the user to use a new API `TransactionDB::CreateTimestampedSnapshot()` to create
a snapshot with associated timestamp.
Code example
```cpp
// Create a timestamped snapshot when committing transaction.
txn->SetCommitTimestamp(100);
txn->SetSnapshotOnNextOperation();
txn->Commit();
// A wrapper API for convenience
Status Transaction::CommitAndTryCreateSnapshot(
std::shared_ptr<TransactionNotifier> notifier,
TxnTimestamp ts,
std::shared_ptr<const Snapshot>* ret);
// Create a timestamped snapshot if caller guarantees no concurrent writes
std::pair<Status, std::shared_ptr<const Snapshot>> snapshot = txn_db->CreateTimestampedSnapshot(100);
```
The snapshots created in this way will be managed by RocksDB with ref-counting and potentially shared with
other readers. We provide the following APIs for readers to retrieve a snapshot given a timestamp.
```cpp
// Return the timestamped snapshot correponding to given timestamp. If ts is
// kMaxTxnTimestamp, then we return the latest timestamped snapshot if present.
// Othersise, we return the snapshot whose timestamp is equal to `ts`. If no
// such snapshot exists, then we return null.
std::shared_ptr<const Snapshot> TransactionDB::GetTimestampedSnapshot(TxnTimestamp ts) const;
// Return the latest timestamped snapshot if present.
std::shared_ptr<const Snapshot> TransactionDB::GetLatestTimestampedSnapshot() const;
```
We also provide two additional APIs for stats collection and reporting purposes.
```cpp
Status TransactionDB::GetAllTimestampedSnapshots(
std::vector<std::shared_ptr<const Snapshot>>& snapshots) const;
// Return timestamped snapshots whose timestamps fall in [ts_lb, ts_ub) and store them in `snapshots`.
Status TransactionDB::GetTimestampedSnapshots(
TxnTimestamp ts_lb,
TxnTimestamp ts_ub,
std::vector<std::shared_ptr<const Snapshot>>& snapshots) const;
```
To prevent the number of timestamped snapshots from growing infinitely, we provide the following API to release
timestamped snapshots whose timestamps are older than or equal to a given threshold.
```cpp
void TransactionDB::ReleaseTimestampedSnapshotsOlderThan(TxnTimestamp ts);
```
Before shutdown, RocksDB will release all timestamped snapshots.
Comparison with user-defined timestamp and how they can be combined:
User-defined timestamp persists every key with a timestamp, while timestamped snapshots maintain a volatile
mapping between snapshots (sequence numbers) and timestamps.
Different internal keys with the same user key but different timestamps will be treated as different by compaction,
thus a newer version will not hide older versions (with smaller timestamps) unless they are eligible for garbage collection.
In contrast, taking a timestamped snapshot at a certain sequence number and timestamp prevents all the keys visible in
this snapshot from been dropped by compaction. Here, visible means (seq < snapshot and most recent).
The timestamped snapshot supports the semantics of reading at an exact point in time.
Timestamped snapshots can also be used with user-defined timestamp.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9879
Test Plan:
```
make check
TEST_TMPDIR=/dev/shm make crash_test_with_txn
```
Reviewed By: siying
Differential Revision: D35783919
Pulled By: riversand963
fbshipit-source-id: 586ad905e169189e19d3bfc0cb0177a7239d1bd4
Summary:
Update SecondaryCache::CreateFromString and enable it to create sec cache based on the uri for CompressedSecondaryCache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10132
Test Plan: Add unit tests.
Reviewed By: anand1976
Differential Revision: D36996997
Pulled By: gitbw95
fbshipit-source-id: 882ad563cff6d38b306a53426ad7e47273f34edc
Summary:
When opening an SST file created using index_type=kHashSearch,
the *current* prefix_extractor would be saved, and used with hash index
if the *new current* prefix_extractor at query time is compatible with
the SST file. This is a problem if the prefix_extractor at SST open time
is not compatible but SetOptions later changes (back) to one that is
compatible.
This change fixes that by using the known compatible (or missing) prefix
extractor we save for use with prefix filtering. Detail: I have moved the
InternalKeySliceTransform wrapper to avoid some indirection and remove
unnecessary fields.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10128
Test Plan:
expanded unit test (using some logic from https://github.com/facebook/rocksdb/issues/10122) that fails
before fix and probably covers some other previously uncovered cases.
Reviewed By: siying
Differential Revision: D36955738
Pulled By: pdillinger
fbshipit-source-id: 0c78a6b0d24054ef2f3cb237bf010c1c5589fb10
Summary:
This PR helps handle the race condition mentioned in this comment thread: https://github.com/facebook/rocksdb/pull/7884#discussion_r572402281 In case where actual full_history_ts_low is higher than the user's requested ts, return a try again message so they don't have the misconception that data between [ts, full_history_ts_low) is kept.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10126
Test Plan:
```
$COMPILE_WITH_ASAN=1 make -j24 all
$./db_with_timestamp_basic_test --gtest_filter=UpdateFullHistoryTsLowTest.ConcurrentUpdate
$ make -j24 check
```
Reviewed By: riversand963
Differential Revision: D37055368
Pulled By: jowlyzhang
fbshipit-source-id: 787fd0984a246540fa03ac227b1d232590d27828
Summary:
As seen in https://github.com/facebook/rocksdb/issues/10137, simply churning the cache key hashes (e.g.
by changing the raw cache keys) could trigger failure in this test, due
to possibility of some cache shard exceeding its portion of capacity
and evicting entries. Updated the test to be less fragile by using
greater margins, and added a pre-check for evictions, which doesn't
manifest as a race condition, before the main check that can race.
Also added stack trace handler to cache_test for debugging.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10145
Test Plan:
test thousands of iterations with gtest-parallel, including
with changes in https://github.com/facebook/rocksdb/issues/10137 that were surfacing the problem. Pre-check
without the fix would always fail with https://github.com/facebook/rocksdb/issues/10137
Reviewed By: guidotag
Differential Revision: D37058771
Pulled By: pdillinger
fbshipit-source-id: a7cf137967aef49c07ae9602d8523c63e7388fab
Summary:
Update jemalloc version for platform009. Current one is a bit old and the new one can bring some quick wins (e.g. new heap profiling features on devserver).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10143
Test Plan:
1. The building and testing on devserver should work.
2. `db_bench` with `--dump_malloc_stats`
`./db_bench --benchmarks=fillrandom --num=10000000 -db=/db_bench_1 `
`./db_bench --benchmarks=overwrite,stats --num=10000000 -use_existing_db -duration=10 --benchmark_write_rate_limit=2000000 -db=/db_bench_1 `
`./db_bench --benchmarks=seekrandom,stats --threads=16 --num=10000000 -use_existing_db -duration=120 --benchmark_write_rate_limit=52000000 -use_direct_reads --cache_size=520000000 --statistics -db=/db_bench_1 --dump_malloc_stats=true`
Before this PR: jemalloc Version: "5.2.1-1303-g73b8faa7149e452f93e52005c89459da08343570"
After this PR: jemalloc Version:
Reviewed By: anand1976
Differential Revision: D37049347
Pulled By: gitbw95
fbshipit-source-id: 3fcd82cca989047b4bbdfdebe5beba2c4c255ed8
Summary:
RocksDB uses WalManager to manage WAL files. In WalManager::ReadFirstLine(), the assumption is that reading the first record of a valid WAL file will return OK status and set the output sequence to non-zero value.
This assumption has been broken by WAL compression which writes a `kSetCompressionType` record which is not associated with any sequence number.
Consequently, WalManager::GetSortedWalsOfType() will skip these WALs and not return them to caller, e.g. Checkpoint, Backup, causing the operations to fail.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10130
Test Plan: - Newly Added test
Reviewed By: riversand963
Differential Revision: D36985744
Pulled By: akankshamahajan15
fbshipit-source-id: dfde7b3be68b6a30b75b49479779748eedf29f7f
Summary:
A recent diff add a few more fields to one of the db_bench output lines that gets parsed.
This diff updates tools/benchmark.sh to handle that.
overwrite : 7.939 micros/op 125963 ops/sec; 50.5 MB/s
overwrite : 7.854 micros/op 127320 ops/sec 1800.001 seconds 229176999 operations; 51.0 MB/s
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10124
Test Plan: Run it
Reviewed By: jay-zhuang
Differential Revision: D36945137
Pulled By: mdcallag
fbshipit-source-id: 9c96f79491411da997e369a3be9c6b921a21d0fa
Summary:
This PR updates secondary instance testing in stress test by default.
A background thread will be started (disabled by default), running a secondary instance tailing the logs of the primary.
Periodically (every 1 sec), this thread calls `TryCatchUpWithPrimary()` and uses point lookup or range scan
to read some random keys with only very basic verification to make sure no assertion failure is triggered.
Thanks to https://github.com/facebook/rocksdb/issues/10061 , we can enable secondary instance when user-defined timestamp is enabled.
Also removed a less useful test configuration, `secondary_catch_up_one_in`. This is very similar to the periodic
catch-up.
In the last commit, I decided not to enable it now, but just update the tests, since secondary instance does not
work well when the underlying file is renamed by primary, e.g. SstFileManager.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10121
Test Plan:
```
TEST_TMPDIR=/dev/shm/rocksdb make crash_test
TEST_TMPDIR=/dev/shm/rocksdb make crash_test_with_ts
TEST_TMPDIR=/dev/shm/rocksdb make crash_test_with_atomic_flush
```
Reviewed By: ajkr
Differential Revision: D36939458
Pulled By: riversand963
fbshipit-source-id: 1c065b7efc3690fc341569b9d369a5cbd8ef6b3e
Summary:
After https://github.com/facebook/rocksdb/issues/9357 we began seeing the following error attempting to acquire
locks for file ingestion:
```
FATAL: ThreadSanitizer CHECK failed: /home/engshare/third-party2/llvm-fb/12/src/llvm/compiler-rt/lib/sanitizer_common/sanitizer_deadlock_detector.h:67 "((n_all_locks_)) < (((sizeof(all_locks_with_contexts_)/sizeof((all_locks_with_contexts_)[0]))))" (0x40, 0x40)
```
The command was using default values for `ingest_external_file_width`
(1000) and `log2_keys_per_lock` (2). The expected number of locks needed
to update those keys is then (1000 / 2^2) = 250, which is above the 0x40 (64)
limit. This PR reduces the default value of `ingest_external_file_width`
to 100 so the expected number of locks is 25, which is within the limit.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10131
Reviewed By: ltamasi
Differential Revision: D36986307
Pulled By: ajkr
fbshipit-source-id: e918cdb2fcc39517d585f1e5fd2539e185ada7c1
Summary:
**Summary:**
Add unit tests to verify that the dynamic priority can be passed from compaction to FS. Compaction reads&writes and other DB reads&writes share the same read&write paths to FSRandomAccessFile or FSWritableFile, so a MockTestFileSystem is added to replace the default filesystem from Env to intercept and verify the io_priority. To prepare the compaction input files, use the default filesystem from Env. To test the io priority of the compaction reads and writes, db_options_.fs is set as MockTestFileSystem.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10088
Test Plan: Add unit tests.
Reviewed By: anand1976
Differential Revision: D36882528
Pulled By: gitbw95
fbshipit-source-id: 120adc15801966f2b8c9fc45285f590a3fff96d1
Summary:
The default implementation of Close() function in Directory/FSDirectory classes returns `NotSupported` status. However, we don't want operations that worked in older versions to begin failing after upgrading when run on FileSystems that have not implemented Directory::Close() yet. So we require the upper level that calls Close() function should properly handle "NotSupported" status instead of treating it as an error status.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10127
Reviewed By: ajkr
Differential Revision: D36971112
Pulled By: littlepig2013
fbshipit-source-id: 100f0e6ad1191e1acc1ba6458c566a11724cf466
Summary:
As pointed out by [https://github.com/facebook/rocksdb/pull/8351#discussion_r645765422](https://github.com/facebook/rocksdb/pull/8351#discussion_r645765422), check `manual_compaction_paused` and `manual_compaction_canceled` can be reduced by setting `*canceled` to be true in `DisableManualCompaction()` and `*canceled` to be false in the last time calling `EnableManualCompaction()`.
Changed Tests: The origin `DBTest2.PausingManualCompaction1` uses a callback function to increase `manual_compaction_paused` and the origin CompactionJob/CompactionIterator with `manual_compaction_paused` can detect this. I changed the callback function so that it sets `*canceled` as true if `canceled` is not `nullptr` (to notify CompactionJob/CompactionIterator the compaction has been canceled).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10070
Test Plan: This change does not introduce new features, but some slight difference in compaction implementation. Run the same manual compaction unit tests as before (e.g., PausingManualCompaction[1-4], CancelManualCompaction[1-2], CancelManualCompactionWithListener in db_test2, and db_compaction_test).
Reviewed By: ajkr
Differential Revision: D36949133
Pulled By: littlepig2013
fbshipit-source-id: c5dc4c956fbf8f624003a0f5ad2690240063a821
Summary:
With this change, when a given read timestamp is smaller than the column-family's full_history_ts_low, Get(), MultiGet() and iterators APIs will return Status::InValidArgument().
Test plan
```
$COMPILE_WITH_ASAN=1 make -j24 all
$./db_with_timestamp_basic_test --gtest_filter=DBBasicTestWithTimestamp.UpdateFullHistoryTsLow
$ make -j24 check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10109
Reviewed By: riversand963
Differential Revision: D36901126
Pulled By: jowlyzhang
fbshipit-source-id: 255feb1a66195351f06c1d0e42acb1ff74527f86
Summary:
As pointed by anand1976 in his [comment](https://github.com/facebook/rocksdb/pull/10049#pullrequestreview-994255819), previous implementation (adding Close() function in Directory/FSDirectory class) is not backward-compatible. And we mistakenly added the default implementation `return Status::NotSupported("Close")` or `return IOStatus::NotSupported("Close")` in WritableFile class in this [pull request](https://github.com/facebook/rocksdb/pull/10101). This pull request fixes the above issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10123
Reviewed By: ajkr
Differential Revision: D36943661
Pulled By: littlepig2013
fbshipit-source-id: 9dc45f4d2ab3a9d51c30bdfde679f1d13c4d5509
Summary:
There was an overflow bug when computing the variance in the HistogramStat class.
This manifests, for instance, when running cache_bench with default arguments. This executes 32M lookups/inserts/deletes in a block cache, and then computes (among other things) the variance of the latencies. The variance is computed as ``variance = (cur_sum_squares * cur_num - cur_sum * cur_sum) / (cur_num * cur_num)``, where ``cum_sum_squares`` is the sum of the squares of the samples, ``cur_num`` is the number of samples, and ``cur_sum`` is the sum of the samples. Because the median latency in a typical run is around 3800 nanoseconds, both the ``cur_sum_squares * cur_num`` and ``cur_sum * cur_sum`` terms overflow as uint64_t.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10100
Test Plan: Added a unit test. Run ``make -j24 histogram_test && ./histogram_test``.
Reviewed By: pdillinger
Differential Revision: D36942738
Pulled By: guidotag
fbshipit-source-id: 0af5fb9e2a297a284e8e74c24e604d302906006e
Summary:
We have three related concepts:
* BlockType: an internal enum conceptually indicating a type of SST file
block
* CacheEntryRole: a user-facing enum for categorizing block cache entries,
which is also involved in associated cache entries with an appropriate
deleter. Can include categories for non-block cache entries (e.g. memory
reservations).
* TBlocklike: a C++ type for the actual type behind a void* cache entry.
We had some existing code ugliness because BlockType did not imply
TBlocklike, because of various kinds of "filter" block. This refactoring
fixes that with new BlockTypes.
More clean-up can come in later work.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10098
Test Plan: existing tests
Reviewed By: akankshamahajan15
Differential Revision: D36897945
Pulled By: pdillinger
fbshipit-source-id: 3ae496b5caa81e0a0ed85e873eb5b525e2d9a295
Summary:
CircleCI runner based benchmarking. A runner is a dedicate machine configured for CircleCI to perform work on. Our work is a repeatable benchmark, the `benchmark-linux` job in `config.yml`
A runner, in CircleCI terminology, is a machine that is managed by the client (us) rather than running on CircleCI resources in the cloud. This means that we define and configure the iron, and that therefore the performance is repeatable and predictable. Which is what we need for performance regression benchmarking.
On a time schedule (or on commit, during branch development) benchmarks are set off on the runner, and then a script is run `benchmark_log_tool.py` which parses the benchmark output and pushes it into a pre-configured OpenSearch document connected to an OpenSearch dashboard. Members of the team can examine benchmark performance changes on the dashboard.
As time progresses we can add different benchmarks to the suite which gets run.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9723
Reviewed By: pdillinger
Differential Revision: D35555626
Pulled By: jay-zhuang
fbshipit-source-id: c6a905ca04494495c3784cfbb991f5ab90c807ee
Summary:
The patch adds some low-level logic that can be used to serialize/deserialize
a sorted vector of wide columns to/from a simple binary searchable string
representation. Currently, there is no user-facing API; this will be implemented in
subsequent stages.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9915
Test Plan: `make check`
Reviewed By: siying
Differential Revision: D35978076
Pulled By: ltamasi
fbshipit-source-id: 33f5f6628ec3bcd8c8beab363b1978ac047a8788
Summary:
If caller specifies a non-null `timestamp` argument in `DB::Get()` or a non-null `timestamps` in `DB::MultiGet()`,
RocksDB will return the timestamps of the point tombstones.
Note: DeleteRange is still unsupported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10056
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D36677956
Pulled By: riversand963
fbshipit-source-id: 2d7af02cc7237b1829cd269086ea895a49d501ae
Summary:
**Context:**
https://github.com/facebook/rocksdb/pull/9748 added support to charge table reader memory to block cache. In the test `ChargeTableReaderTest/ChargeTableReaderTest.Basic`, it estimated the table reader memory, calculated the expected number of table reader opened based on this estimation and asserted this number with actual number. The expected number of table reader opened calculated based on estimated table reader memory will not be 100% accurate and should have tolerance for error. It was previously set to 1% and recently encountered an assertion failure that `(opened_table_reader_num) <= (max_table_reader_num_capped_upper_bound), actual: 375 or 376 vs 374` where `opened_table_reader_num` is the actual opened one and `max_table_reader_num_capped_upper_bound` is the estimated opened one (=371 * 1.01). I believe it's safe to increase error tolerance from 1% to 5% hence there is this PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10113
Test Plan: - CI again succeeds.
Reviewed By: ajkr
Differential Revision: D36911556
Pulled By: hx235
fbshipit-source-id: 259687dd77b450fea0f5658a5b567a1d31d4b1f7
Summary:
When building RocksDB with getdeps on Windows, `thirdparty.inc` get in the way since `FindXXXX.cmake` are working properly now.
This PR adds an option to skip that file when building RocksDB so we can disable it.
FB: see [D36905191](https://www.internalfb.com/diff/D36905191).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10110
Reviewed By: siying
Differential Revision: D36913882
Pulled By: fanzeyi
fbshipit-source-id: 33d36841dc0d4fe87f51e1d9fd2b158a3adab88f
Summary:
The patch attempts to fix three bugs in `verify_random_db.sh`:
1) https://github.com/facebook/rocksdb/pull/9937 changed the default for
`--try_load_options` to true in the script's use case, so we have to
explicitly set it to false if the corresponding argument of the script
is 0. This should fix the issue we've been seeing with our forward
compatibility tests where 7.3 is unable to open a database created by
the version on main after adding a new configuration option.
2) The script seems to support two "extra parameters"; however,
in practice, if the second one was set, only that one was passed on to
`ldb`. Now both get forwarded.
3) When running the `diff` command, the base DB directory was passed as
the second argument instead of the file containing the `ldb` output
(this actually seems to work, probably accidentally though).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10112
Reviewed By: pdillinger
Differential Revision: D36911363
Pulled By: ltamasi
fbshipit-source-id: fe29db4e28d373cee51a12322c59050fc50e926d
Summary:
Closing https://github.com/facebook/rocksdb/issues/10080
When `SyncWAL()` calls `MarkLogsSynced()`, even if there is only one active WAL file,
this event should still be added to the MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10087
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D36797580
Pulled By: riversand963
fbshipit-source-id: 24184c9dd606b3939a454ed41de6e868d1519999
Summary:
cache_bench can now run with FastLRUCache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10095
Test Plan:
- Temporarily add an ``assert(false)`` in the execution path that sets up the FastLRUCache. Run ``make -j24 cache_bench``. Then test the appropriate code is used by running ``./cache_bench -cache_type=fast_lru_cache`` and checking that the assert is called. Repeat for LRUCache.
- Verify that FastLRUCache (currently a clone of LRUCache) has similar latency distribution than LRUCache, by comparing the outputs of ``./cache_bench -cache_type=fast_lru_cache`` and ``./cache_bench -cache_type=lru_cache``.
Reviewed By: pdillinger
Differential Revision: D36875834
Pulled By: guidotag
fbshipit-source-id: eb2ad0bb32c2717a258a6ac66ed736e06f826cd8
Summary:
As pointed by anand1976 in his [comment](https://github.com/facebook/rocksdb/pull/10049#pullrequestreview-994255819), previous implementation is not backward-compatible. In this implementation, the default implementation `return Status::NotSupported("Close")` or `return IOStatus::NotSupported("Close")` is added for `Close()` function for `*Directory` classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10101
Test Plan: DBBasicTest.DBCloseAllDirectoryFDs
Reviewed By: anand1976
Differential Revision: D36899346
Pulled By: littlepig2013
fbshipit-source-id: 430624793362f330cbb8837960f0e8712a944ab9
Summary:
db_bench can now run with FastLRUCache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10096
Test Plan:
- Temporarily add an ``assert(false)`` in the execution path that sets up the FastLRUCache. Run ``make -j24 db_bench``. Then test the appropriate code is used by running ``./db_bench -cache_type=fast_lru_cache`` and checking that the assert is called. Repeat for LRUCache.
- Verify that FastLRUCache (currently a clone of LRUCache) produces similar benchmark data than LRUCache, by comparing the outputs of ``./db_bench -benchmarks=fillseq,fillrandom,readseq,readrandom -cache_type=fast_lru_cache`` and ``./db_bench -benchmarks=fillseq,fillrandom,readseq,readrandom -cache_type=lru_cache``.
Reviewed By: gitbw95
Differential Revision: D36898774
Pulled By: guidotag
fbshipit-source-id: f9f6b6f6da124f88b21b3c8dee742fbb04eff773
Summary:
In [close_db_dir](https://github.com/facebook/rocksdb/pull/10049) pull request, some merging conflicts occurred (some comments and one line `s.PermitUncheckedError()` are missing). This pull request aims to put them back.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10093
Reviewed By: ajkr
Differential Revision: D36884117
Pulled By: littlepig2013
fbshipit-source-id: 8c0e2a8793fc52804067c511843bd1ff4912c1c3
Summary:
Currently, if blob files are enabled (i.e. `enable_blob_files` is true), large values are extracted both during flush/recovery (when SST files are written into level 0 of the LSM tree) and during compaction into any LSM tree level. For certain use cases that have a mix of short-lived and long-lived values, it might make sense to support extracting large values only during compactions whose output level is greater than or equal to a specified LSM tree level (e.g. compactions into L1/L2/... or above). This could reduce the space amplification caused by large values that are turned into garbage shortly after being written at the price of some write amplification incurred by long-lived values whose extraction to blob files is delayed.
In order to achieve this, we would like to do the following:
- Add a new configuration option `blob_file_starting_level` (default: 0) to `AdvancedColumnFamilyOptions` (and `MutableCFOptions` and extend the related logic)
- Instantiate `BlobFileBuilder` in `BuildTable` (used during flush and recovery, where the LSM tree level is L0) and `CompactionJob` iff `enable_blob_files` is set and the LSM tree level is `>= blob_file_starting_level`
- Add unit tests for the new functionality, and add the new option to our stress tests (`db_stress` and `db_crashtest.py` )
- Add the new option to our benchmarking tool `db_bench` and the BlobDB benchmark script `run_blob_bench.sh`
- Add the new option to the `ldb` tool (see https://github.com/facebook/rocksdb/wiki/Administration-and-Data-Access-Tool)
- Ideally extend the C and Java bindings with the new option
- Update the BlobDB wiki to document the new option.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10077
Reviewed By: ltamasi
Differential Revision: D36884156
Pulled By: gangliao
fbshipit-source-id: 942bab025f04633edca8564ed64791cb5e31627d
Summary:
Only used as temperature high bound for current code, may
increase with more temperatures added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10044
Test Plan: ci
Reviewed By: siying
Differential Revision: D36633410
Pulled By: jay-zhuang
fbshipit-source-id: eecdfa7623c31778c31d789902eacf78aad7b482
Summary:
Garbage collection is generally controlled by the BlobDB configuration options `enable_blob_garbage_collection` and `blob_garbage_collection_age_cutoff`. However, there might be use cases where we would want to temporarily override these options while performing a manual compaction. (One use case would be doing a full key-space manual compaction with full=100% garbage collection age cutoff in order to minimize the space occupied by the database.) Our goal here is to make it possible to override the configured GC parameters when using the `CompactRange` API to perform manual compactions. This PR would involve:
- Extending the `CompactRangeOptions` structure so clients can both force-enable and force-disable GC, as well as use a different cutoff than what's currently configured
- Storing whether blob GC should actually be enabled during a certain manual compaction and the cutoff to use in the `Compaction` object (considering the above overrides) and passing it to `CompactionIterator` via `CompactionProxy`
- Updating the BlobDB wiki to document the new options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10073
Test Plan: Adding unit tests and adding the new options to the stress test tool.
Reviewed By: ltamasi
Differential Revision: D36848700
Pulled By: gangliao
fbshipit-source-id: c878ef101d1c612429999f513453c319f75d78e9
Summary:
Currently, the DB directory file descriptor is left open until the deconstruction process (`DB::Close()` does not close the file descriptor). To verify this, comment out the lines between `db_ = nullptr` and `db_->Close()` (line 512, 513, 514, 515 in ldb_cmd.cc) to leak the ``db_'' object, build `ldb` tool and run
```
strace --trace=open,openat,close ./ldb --db=$TEST_TMPDIR --ignore_unknown_options put K1 V1 --create_if_missing
```
There is one directory file descriptor that is not closed in the strace log.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10049
Test Plan: Add a new unit test DBBasicTest.DBCloseAllDirectoryFDs: Open a database with different WAL directory and three different data directories, and all directory file descriptors should be closed after calling Close(). Explicitly call Close() after a directory file descriptor is not used so that the counter of directory open and close should be equivalent.
Reviewed By: ajkr, hx235
Differential Revision: D36722135
Pulled By: littlepig2013
fbshipit-source-id: 07bdc2abc417c6b30997b9bbef1f79aa757b21ff
Summary:
Stress tests can run with the experimental FastLRUCache. Crash tests randomly choose between LRUCache and FastLRUCache.
Since only LRUCache supports a secondary cache, we validate the `--secondary_cache_uri` and `--cache_type` flags---when `--secondary_cache_uri` is set, the `--cache_type` is set to `lru_cache`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10081
Test Plan:
- To test that the FastLRUCache is used and the stress test runs successfully, run `make -j24 CRASH_TEST_EXT_ARGS=—duration=960 blackbox_crash_test_with_atomic_flush`. The cache type should sometimes be `fast_lru_cache`.
- To test the flag validation, run `make -j24 CRASH_TEST_EXT_ARGS="--duration=960 --secondary_cache_uri=x" blackbox_crash_test_with_atomic_flush` multiple times. The test will always be aborted (which is okay). Check that the cache type is always `lru_cache`.
Reviewed By: anand1976
Differential Revision: D36839908
Pulled By: guidotag
fbshipit-source-id: ebcdfdcd12ec04c96c09ae5b9c9d1e613bdd1725
Summary:
`db_impl.alive_log_files_` is used to track the WAL size in `db_impl.logs_`.
Get the `LogFileNumberSize` obj in `alive_log_files_` the same time as `log_writer` to keep them consistent.
For this issue, it's not safe to do `deque::reverse_iterator::operator*` and `deque::pop_front()` concurrently,
so remove the tail cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10086
Test Plan:
```
# on Windows
gtest-parallel ./db_test --gtest_filter=DBTest.FileCreationRandomFailure -r 1000 -w 100
```
Reviewed By: riversand963
Differential Revision: D36822373
Pulled By: jay-zhuang
fbshipit-source-id: 5e738051dfc7bcf6a15d85ba25e6365df6b6a6af
Summary:
We recently saw a case in crash test in which a WAL file in the
middle of the list of live WALs was not included in the backup, so the
DB was not openable due to missing WAL. We are not sure why, but this
change should at least turn that into a backup-time failure by ensuring
all the WAL files expected by the manifest (according to VersionSet) are
included in `GetSortedWalFiles()` (used by `GetLiveFilesStorageInfo()`,
`BackupEngine`, and `Checkpoint`)
Related: to maximize the effectiveness of
track_and_verify_wals_in_manifest with GetSortedWalFiles() during
checkpoint/backup, we will now sync WAL in GetLiveFilesStorageInfo()
when track_and_verify_wals_in_manifest=true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10083
Test Plan: added new unit test for the check in GetSortedWalFiles()
Reviewed By: ajkr
Differential Revision: D36791608
Pulled By: pdillinger
fbshipit-source-id: a27bcf0213fc7ab177760fede50d4375d579afa6
Mark Callaghan