Summary:
We were not resetting it in non-debug mode so it could be true once and then stay true for future keys where it should be false. This PR adds the reset logic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10967
Test Plan:
- built `db_bench` with DEBUG_LEVEL=0
- ran benchmark: `TEST_TMPDIR=/dev/shm/prefix ./db_bench -benchmarks=fillrandom -compaction_style=1 -preserve_internal_time_seconds=100 -preclude_last_level_data_seconds=10 -write_buffer_size=1048576 -target_file_size_base=1048576 -subcompactions=8 -duration=120`
- compared "output_to_penultimate_level: X bytes + last: Y bytes" lines in LOG output
- Before this fix, Y was always zero
- After this fix, Y gradually increased throughout the benchmark
Reviewed By: riversand963
Differential Revision: D41417726
Pulled By: ajkr
fbshipit-source-id: ace1e9a289e751a5b0c2fbaa8addd4eda5525329
Summary:
Background. One of the core risks of chosing HyperClockCache is ending up with degraded performance if estimated_entry_charge is very significantly wrong. Too low leads to under-utilized hash table, which wastes a bit of (tracked) memory and likely increases access times due to larger working set size (more TLB misses). Too high leads to fully populated hash table (at some limit with reasonable lookup performance) and not being able to cache as many objects as the memory limit would allow. In either case, performance degradation is graceful/continuous but can be quite significant. For example, cutting block size in half without updating estimated_entry_charge could lead to a large portion of configured block cache memory (up to roughly 1/3) going unused.
Fix. This change adds a mechanism through which the DB periodically probes the block cache(s) for "problems" to report, and adds diagnostics to the HyperClockCache for bad estimated_entry_charge. The periodic probing is currently done with DumpStats / stats_dump_period_sec, and diagnostics reported to info_log (normally LOG file).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10965
Test Plan:
unit test included. Doesn't cover all the implemented subtleties of reporting, but ensures basics of when to report or not.
Also manual testing with db_bench. Create db with
```
./db_bench --benchmarks=fillrandom,flush --num=3000000 --disable_wal=1
```
Use and check LOG file for HyperClockCache for various block sizes (used as estimated_entry_charge)
```
./db_bench --use_existing_db --benchmarks=readrandom --num=3000000 --duration=20 --stats_dump_period_sec=8 --cache_type=hyper_clock_cache -block_size=XXXX
```
Seeing warnings / errors or not as expected.
Reviewed By: anand1976
Differential Revision: D41406932
Pulled By: pdillinger
fbshipit-source-id: 4ca56162b73017e4b9cec2cad74466f49c27a0a7
Summary:
After a couple minor bug fixes and successful productions roll-outs in a few places, I think we can mark this as production-ready. It has a clear value proposition for many workloads, even if we don't have clear advice for every workload yet.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10963
Test Plan: existing tests, comment changes only
Reviewed By: siying
Differential Revision: D41384083
Pulled By: pdillinger
fbshipit-source-id: 56359f01a57bb28de8697666b342382fac72ce6d
Summary:
This was just a stepping stone to what eventually became HyperClockCache, and is now just more code to maintain.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10954
Test Plan: tests updated
Reviewed By: akankshamahajan15
Differential Revision: D41310123
Pulled By: pdillinger
fbshipit-source-id: 618ee148a1a0a29ee756ba8fe28359617b7cd67c
Summary:
No material changes to code or comments, just re-arranging things to prepare for a big refactoring, making it easier to what changed. Some specifics:
* This groups things together in Cache in anticipation of secondary cache features being marked production-ready (vs. experimental).
* CacheEntryRole will be needed in definition of class Cache, so that has been moved above it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10942
Test Plan: existing tests
Reviewed By: anand1976
Differential Revision: D41205509
Pulled By: pdillinger
fbshipit-source-id: 3f2559ab1651c758918dc97056951fa2b5eb0348
Summary:
With the recent changes, `GetMergeOperands` is now supported for wide-column entities as well, so we can use it for verification purposes in the non-batched stress tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10952
Test Plan: Ran a simple non-batched ops blackbox crash test.
Reviewed By: riversand963
Differential Revision: D41292114
Pulled By: ltamasi
fbshipit-source-id: 70b4c756a4a1fecb445c16c7096aad805a51203c
Summary:
Fix db_stress failure in async_io in FilePrefetchBuffer.
From the logs, assertion was caused when
- prev_offset_ = offset but somehow prev_len != 0 and explicit_prefetch_submitted_ = true. That scenario is when we send async request to prefetch buffer during seek but in second seek that data is found in cache. prev_offset_ and prev_len_ get updated but we were not setting explicit_prefetch_submitted_ = false because of which buffers were getting out of sync.
It's possible a read by another thread might have loaded the block into the cache in the meantime.
Particular assertion example:
```
prev_offset: 0, prev_len_: 8097 , offset: 0, length: 8097, actual_length: 8097 , actual_offset: 0 ,
curr_: 0, bufs_[curr_].offset_: 4096 ,bufs_[curr_].CurrentSize(): 48541 , async_len_to_read: 278528, bufs_[curr_].async_in_progress_: false
second: 1, bufs_[second].offset_: 282624 ,bufs_[second].CurrentSize(): 0, async_len_to_read: 262144 ,bufs_[second].async_in_progress_: true ,
explicit_prefetch_submitted_: true , copy_to_third_buffer: false
```
As we can see curr_ was expected to read 278528 but it read 48541. Also buffers are out of sync.
Also `explicit_prefetch_submitted_` is set true but prev_len not 0.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10949
Test Plan:
- Ran db_bench for regression to make sure there is no regression;
- Ran db_stress failing without this fix,
- Ran build-linux-mini-crashtest 7- 8 times locally + CircleCI
Reviewed By: anand1976
Differential Revision: D41257786
Pulled By: akankshamahajan15
fbshipit-source-id: 1d100f94f8c06bbbe4cc76ca27f1bbc820c2494f
Summary:
Add stats for time spent in the ReadAsync call, and async read errors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10947
Test Plan: Run db_bench and look at stats
Reviewed By: akankshamahajan15
Differential Revision: D41236637
Pulled By: anand1976
fbshipit-source-id: 70539b69a28491d57acead449436a761f7108acf
Summary:
Compressed block cache depends on reading the block compression marker beyond the payload block size. Only the payload bytes were being saved and loaded from SecondaryCache -> boom!
This removes some unnecessary code attempting to combine these two competing features. Note that BlockContents was previously used for block-based filter in block cache, but that support has been removed.
Also marking block_cache_compressed as deprecated in this commit as we expect it to be replaced with SecondaryCache.
This problem was discovered during refactoring but didn't want to combine bug fix with that refactoring.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10944
Test Plan: test added that fails on base revision (at least with ASAN)
Reviewed By: akankshamahajan15
Differential Revision: D41205578
Pulled By: pdillinger
fbshipit-source-id: 1b29d36c7a6552355ac6511fcdc67038ef4af29f
Summary:
The patch extends the compaction logic to handle `Merge`s in conjunction with wide-column entities. As usual, the merge operation is applied to the anonymous default column, and any other columns are unaffected.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10946
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D41233722
Pulled By: ltamasi
fbshipit-source-id: dfd9b1362222f01bafcecb139eb48480eb279fed
Summary:
The patch adds `Merge` support for wide-column entities in `DBIter`. As before, the `Merge` operation is applied to the default column of the entity; any other columns are unchanged. As a small cleanup, the PR also changes the signature of `DBIter::Merge` to simply return a boolean instead of the `Merge` operation's `Status` since the actual `Status` is already stored in a member variable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10941
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D41195471
Pulled By: ltamasi
fbshipit-source-id: 362cf555897296e252c3de5ddfbd569ef34f85ef
Summary:
The patch untangles some nested ifs in `MergeHelper::MergeUntil`. This will come in handy when extending the compaction logic to support `Merge` for wide-column entities, and also enables us to eliminate some repeated branching on value type and to decrease the scope of some variables.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10943
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D41201946
Pulled By: ltamasi
fbshipit-source-id: 890bd3d4e31cdccadca614489a94686d76485ba9
Summary:
The patch refines/reworks `MergeHelper::TimedFullMerge(WithEntity)`
a bit in two ways. First, it eliminates the recently introduced `TimedFullMerge`
overload, which makes the responsibilities clearer by making sure the query
result (`value` for `Get`, `columns` for `GetEntity`) is set uniformly in
`SaveValue` and `GetContext`. Second, it changes the interface of
`TimedFullMergeWithEntity` so it exposes its result in a serialized form; this
is a more decoupled design which will come in handy when adding support
for `Merge` with wide-column entities to `DBIter`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10932
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D41129399
Pulled By: ltamasi
fbshipit-source-id: 69d8da358c77d4fc7e8c40f4dafc2c129a710677
Summary:
`DBIter::saved_value_` stores the result of any `Merge` that was performed to compute the iterator's current value. This value can be ditched whenever the iterator's position is changed, and is already cleared in `Seek`, `SeekForPrev`, `SeekToFirst`, and `SeekToLast`. With the patch, it is also cleared in `Next` and `Prev`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10934
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D41133473
Pulled By: ltamasi
fbshipit-source-id: cf9e936f48151e64e455cc1664d6e9f4a03aa308
Summary:
Hello,
As discussed previously in this [discussion](https://github.com/facebook/rocksdb/pull/9680#discussion_r853105163), the mentioned PR introduced a regression in portable versions that compile with MSVC - crc_3way optimization won't be used even in cases where it is supported.
This PR aims to fix just that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10667
Reviewed By: akankshamahajan15
Differential Revision: D40644592
Pulled By: ajkr
fbshipit-source-id: dadbeb10d57c19800e74288258ec3b96095557dd
Summary:
The patch fixes a bug where `GetContext::Merge` (and `MergeEntity`) does not update the ticker `READ_NUM_MERGE_OPERANDS` because it implicitly uses the default parameter value of `update_num_ops_stats=false` when calling `MergeHelper::TimedFullMerge`. Also, to prevent such issues going forward, the PR removes the default parameter values from the `TimedFullMerge` methods. In addition, it removes an unused/unnecessary parameter from `TimedFullMergeWithEntity`, and does some cleanup at the call sites of these methods.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10925
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D41096453
Pulled By: ltamasi
fbshipit-source-id: fc60646d32b4d516b8fe81e265c3f020a32fd7f8
Summary:
In transaction unit tests, replace a few member variable lambdas with
non-static methods. It's easier for gdb to work with variables in methods than in lambdas.
(Seen similar things to https://gcc.gnu.org/bugzilla/show_bug.cgi?id=86675).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10924
Test Plan: make check
Reviewed By: jay-zhuang
Differential Revision: D41072241
Pulled By: riversand963
fbshipit-source-id: e4fa491de573c4656225a86a75af926c1df827f6
Summary:
Prevents `MemTableList::PickMemtablesToFlush()` from picking non-consecutive memtables. It leads to wrong ordering in L0 if the files are committed, or an error like below if force_consistency_checks=true catches it:
```
Corruption: force_consistency_checks: VersionBuilder: L0 file https://github.com/facebook/rocksdb/issues/25 with seqno 320416 368066 vs. file https://github.com/facebook/rocksdb/issues/24 with seqno 336037 352068
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10921
Test Plan: fix the expectation in the existing test of this behavior
Reviewed By: riversand963
Differential Revision: D41046935
Pulled By: ajkr
fbshipit-source-id: 783696bff56115063d5dc5856dfaed6a9881d1ab
Summary:
When performing Merge during range scan, iterator should understand value types of kDeletionWithTimestamp.
Also add an additional check in debug mode to MergeHelper, and account for the presence of compaction filter.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10915
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D40960039
Pulled By: riversand963
fbshipit-source-id: dd79d86d7c79d05755bb939a3d94e0c53ddd7f59
Summary:
The patch adds `Merge` support for wide-column entities to the point lookup
APIs, i.e. `Get`, `MultiGet`, `GetEntity`, and `GetMergeOperands`. (I plan to
update the iterator and compaction logic in separate PRs.) In terms of semantics,
the `Merge` operation is applied to the default (anonymous) column; any other
columns in the entity are unaffected.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10916
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D40962311
Pulled By: ltamasi
fbshipit-source-id: 244bc9d172be1af2f204796b2f89104e4d2fa373
Summary:
For clean-up and in preparation for some other anticipated changes, including
* A new dynamically-scaling variant of HyperClockCache
* SecondaryCache support for HyperClockCache
This change does some refactoring for current and future code sharing and reusability. (Including follow-up on https://github.com/facebook/rocksdb/issues/10843)
## clock_cache.h
* TBD whether new variant will be a HyperClockCache or use some other name, so namespace is just clock_cache for the family of structures.
* A number of helper functions introduced and used.
* Pre-emptively split ClockHandle (shared among lock-free clock cache variants) and HandleImpl (specific to a kind of Table), and introduce template to plug new Table implementation into ClockCacheShard.
## clock_cache.cc
* Mostly using helper functions. Some things like `Rollback()` and `FreeDataMarkEmpty()` were not combined because `Rollback()` is Table-specific while `FreeDataMarkEmpty()` can be used with different table implementations.
* Performance testing indicated that despite more opportunities for parallelism, making a local copy of handle data for processing after marking an entry empty was slower than doing that processing before marking the entry empty (but after marking it "under construction"), thus avoiding a few words of copying data. At least for now, this answers the "TODO? Delay freeing?" questions (no).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10887
Test Plan:
fixed a unit testing gap; other minor test updates for refactoring
No functionality change
## Performance
Same setup as https://github.com/facebook/rocksdb/issues/10801:
Before: `readrandom [AVG 81 runs] : 627992 (± 5124) ops/sec`
After: `readrandom [AVG 81 runs] : 637512 (± 4866) ops/sec`
I've been getting some inconsistent results on restarts like the system is not being fair to the two processes, so I'm not sure there's such a real difference.
Reviewed By: anand1976
Differential Revision: D40959240
Pulled By: pdillinger
fbshipit-source-id: 0a8f3646b3bdb5bc7aaad60b26790b0779189949
Summary:
With TSAN build on CircleCI (see mini-tsan in .circleci/config).
Sometimes `SeqAdvanceConcurrentTest.SeqAdvanceConcurrent` will get stuck when an experimental feature called
"unordered write" is enabled. Stack trace will be the following
```
Thread 7 (Thread 0x7f2284a1c700 (LWP 481523) "write_prepared_"):
#0 0x00000000004fa3f5 in __tsan_atomic64_load () at ./db/merge_context.h:15
https://github.com/facebook/rocksdb/issues/1 0x00000000005e5942 in std::__atomic_base<unsigned long>::load (this=0x7b74000012f8, __m=std::memory_order_seq_cst) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/atomic_base.h:481
https://github.com/facebook/rocksdb/issues/2 std::__atomic_base<unsigned long>::operator unsigned long (this=0x7b74000012f8) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/atomic_base.h:341
https://github.com/facebook/rocksdb/issues/3 0x00000000005bf001 in rocksdb::SeqAdvanceConcurrentTest_SeqAdvanceConcurrent_Test::TestBody()::$_9::operator()(void*) const (this=0x7b14000085e8) at utilities/transactions/write_prepared_transaction_test.cc:1702
Thread 6 (Thread 0x7f228421b700 (LWP 481521) "write_prepared_"):
#0 0x000000000052178c in __tsan::MetaMap::GetAndLock(__tsan::ThreadState*, unsigned long, unsigned long, bool, bool) () at ./db/merge_context.h:15
https://github.com/facebook/rocksdb/issues/1 0x00000000004fa48e in __tsan_atomic64_load () at ./db/merge_context.h:15
https://github.com/facebook/rocksdb/issues/2 0x00000000005e5942 in std::__atomic_base<unsigned long>::load (this=0x7b74000012f8, __m=std::memory_order_seq_cst) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/atomic_base.h:481
https://github.com/facebook/rocksdb/issues/3 std::__atomic_base<unsigned long>::operator unsigned long (this=0x7b74000012f8) at /usr/bin/../lib/gcc/x86_64-linux-gnu/11/../../../../include/c++/11/bits/atomic_base.h:341
https://github.com/facebook/rocksdb/issues/4 0x00000000005bf001 in rocksdb::SeqAdvanceConcurrentTest_SeqAdvanceConcurrent_Test::TestBody()::$_9::operator()(void*) const (this=0x7b14000085e8) at utilities/transactions/write_prepared_transaction_test.cc:1702
```
This is problematic and suspicious. Two threads will get stuck in the same place trying to load from an atomic variable.
https://github.com/facebook/rocksdb/blob/7.8.fb/utilities/transactions/write_prepared_transaction_test.cc#L1694:L1707. Not sure why two threads can reach the same point.
The stack trace shows that there may be a deadlock, since the two threads are on the same write thread (one is doing Prepare, while the other is trying to commit).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10909
Test Plan:
On CircleCI mini-tsan, apply a patch first so that we have a higher chance of hitting the same problematic situation,
```
diff --git a/utilities/transactions/write_prepared_transaction_test.cc b/utilities/transactions/write_prepared_transaction_test.cc
index 4bc1f3744..bd5dc4924 100644
--- a/utilities/transactions/write_prepared_transaction_test.cc
+++ b/utilities/transactions/write_prepared_transaction_test.cc
@@ -1714,13 +1714,13 @@ TEST_P(SeqAdvanceConcurrentTest, SeqAdvanceConcurrent) {
size_t d = (n % base[bi + 1]) / base[bi];
switch (d) {
case 0:
- threads.emplace_back(txn_t0, bi);
+ threads.emplace_back(txn_t3, bi);
break;
case 1:
- threads.emplace_back(txn_t1, bi);
+ threads.emplace_back(txn_t3, bi);
break;
case 2:
- threads.emplace_back(txn_t2, bi);
+ threads.emplace_back(txn_t3, bi);
break;
case 3:
threads.emplace_back(txn_t3, bi);
```
then build and run tests
```
COMPILE_WITH_TSAN=1 CC=clang-13 CXX=clang++-13 ROCKSDB_DISABLE_ALIGNED_NEW=1 USE_CLANG=1 make V=1 -j32 check
gtest-parallel -r 100 ./write_prepared_transaction_test --gtest_filter=TwoWriteQueues/SeqAdvanceConcurrentTest.SeqAdvanceConcurrent/19
```
In the above, `SeqAdvanceConcurrent/19`. The tests 10 to 19 correspond to unordered write in which Prepare() and Commit() can both enter the same write thread.
Before this PR, there is a high chance of hitting the deadlock. With this PR, no deadlock has been encountered so far.
Reviewed By: ltamasi
Differential Revision: D40869387
Pulled By: riversand963
fbshipit-source-id: 81e82a70c263e4f3417597a201b081ee54f1deab
Summary:
Cross compiling rocksdb with rust bindings to android leads to an error since 7.4.0 (Incusion of madvise)
This is due to missing placeholders for non-linux platforms.
This PR adds the missing placeholders.
See https://github.com/rust-rocksdb/rust-rocksdb/issues/697 for the specific error thrown.
I have just completed the CLA :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10881
Reviewed By: akankshamahajan15
Differential Revision: D40726103
Pulled By: ajkr
fbshipit-source-id: 6b391636a74ef7e20d0daf47d332ddf0c14d5c34
Summary:
The user may override the detection of whether to use GNU libc (the default) or musl libc by setting the environment variable: `ROCKSDB_MUSL_LIBC=true`.
Builds upon and supersedes: https://github.com/facebook/rocksdb/pull/9977
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10889
Reviewed By: akankshamahajan15
Differential Revision: D40788431
Pulled By: ajkr
fbshipit-source-id: ef594d973fc14cbadf28bfb38434231a18a2107c
Summary:
Ran `find ./db/ -type f | xargs clang-format -i`. Excluded minor changes it tried to make on db/db_impl/. Everything else it changed was directly under db/ directory. Included minor manual touchups mentioned in PR commit history.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10910
Reviewed By: riversand963
Differential Revision: D40880683
Pulled By: ajkr
fbshipit-source-id: cfe26cda05b3fb9a72e3cb82c286e21d8c5c4174
Summary:
Fix memory corruption error in scans if async_io is enabled. Memory corruption happened if data is overlapping between two buffers. If there is IOError while reading the data, it leads to empty buffer and other buffer already in progress of async read goes again for reading causing the error.
Fix: Added check to abort IO in second buffer if curr_ got empty.
This PR also fixes db_stress failures which happened when buffers are not aligned.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10890
Test Plan:
- Ran make crash_test -j32 with async_io enabled.
- Ran benchmarks to make sure there is no regression.
Reviewed By: anand1976
Differential Revision: D40881731
Pulled By: akankshamahajan15
fbshipit-source-id: 39fcf2134c7b1bbb08415ede3e1ef261ac2dbc58
Summary:
This PR implements the originally disabled `Merge()` APIs when user-defined timestamp is enabled.
Simplest usage:
```cpp
// assume string append merge op is used with '.' as delimiter.
// ts1 < ts2
db->Put(WriteOptions(), "key", ts1, "v0");
db->Merge(WriteOptions(), "key", ts2, "1");
ReadOptions ro;
ro.timestamp = &ts2;
db->Get(ro, "key", &value);
ASSERT_EQ("v0.1", value);
```
Some code comments are added for clarity.
Note: support for timestamp in `DB::GetMergeOperands()` will be done in a follow-up PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10819
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D40603195
Pulled By: riversand963
fbshipit-source-id: f96d6f183258f3392d80377025529f7660503013
Summary:
I've tried to compile the main branch, but there are two minor things which are make CE.
I'm not sure about the second one (`num_empty_non_l0_level`), probably there is should be additional assert.
```
-c ../cache/clock_cache.cc
[build] ../cache/clock_cache.cc:855:15: error: variable 'i' set but not used [-Werror,-Wunused-but-set-variable]
[build] for (size_t i = 0; &array_[current] != h; i++) {
[build] ^
```
```
[build] ../db/version_set.cc:3665:7: error: variable 'num_empty_non_l0_level' set but not used [-Werror,-Wunused-but-set-variable]
[build] int num_empty_non_l0_level = 0;
[build] ^
[build] 1 error generated.
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10907
Reviewed By: jay-zhuang
Differential Revision: D40866667
Pulled By: ajkr
fbshipit-source-id: 963b7bd56859d0b3b2779cd36fad229425cb7b17
Summary:
**Context/Summary:**
https://github.com/facebook/rocksdb/pull/10777 mistakenly added a history entry under 7.8 release but the PR is not included in 7.8. This mistake was due to rebase and merge didn't realize it was a conflict when "## Unreleased" was changed to "## 7.8.0 (10/22/2022)".
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10898
Test Plan: Make check
Reviewed By: akankshamahajan15
Differential Revision: D40861001
Pulled By: hx235
fbshipit-source-id: b2310c95490f6ebb90834a210c965a74c9560b51
Summary:
When there is a column family that doesn't get any traffic, its stats are still dumped when options.options.stats_dump_period_sec triggers. This sometimes spam the information logs. With this change, we skip the printing if there is not change, until 8 periods.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10891
Test Plan: Manually test the behavior with hacked db_bench setups.
Reviewed By: jay-zhuang
Differential Revision: D40777183
fbshipit-source-id: ef0b9a793e4f6282df099b464f01d1fb4c5a2cab
Summary:
Currently, a memtable's stats `num_deletes_` is incremented only if the entry is a regular delete (kTypeDeletion). We need to fix it by accounting for kTypeSingleDeletion and kTypeDeletionWithTimestamp.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10886
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D40740754
Pulled By: riversand963
fbshipit-source-id: 7bde62cd6df136585bc5bfb1c426c7a8276c08e1
Summary:
The for loop is marked as unreachable code because it will never call the increment. Switch it to `if`.
```
\table\merging_iterator.cc(823): error C2220: the following warning is treated as an error
\table\merging_iterator.cc(823): warning C4702: unreachable code
\table\merging_iterator.cc(1030): error C2220: the following warning is treated as an error
\table\merging_iterator.cc(1030): warning C4702: unreachable code
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10897
Reviewed By: cbi42
Differential Revision: D40811790
Pulled By: jay-zhuang
fbshipit-source-id: fe8fd3e7cf3d6f710360c402b79763854d5120df
Summary:
The motivation and benefit of current behavior of passing `LockInfo&&` as argument to AcquireLocked() and AcquireWithTimeout() is not clear to me. Furthermore, in AcquireWithTimeout(), we access members of `LockInfo&&` after it is passed to AcquireLocked() as rvalue ref. In addition, we may call `AcquireLocked()` with `std::move(lock_info)` multiple times.
This leads to linter warning of use-after-move. If future implementation of AcquireLocked() does something like moving-construct a new `LockedInfo` using the passed-in `LockInfo&&`, then the caller cannot use it because `LockInfo` has a member of type `autovector`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10874
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D40704210
Pulled By: riversand963
fbshipit-source-id: 20091df65b4fc63b072bcec9809efc49955d6d35
Summary:
The PR fixes the handling of `Merge`s in `GetEntity`. Note that `Merge` is not yet
supported for wide-column entities written using `PutEntity`; this change is
about returning correct (i.e. consistent with `Get`) results in cases like when the
base value is a plain old key-value written using `Put` or when there is no real base
value because we hit either a tombstone or the beginning of history.
Implementation-wise, the patch introduces a new wrapper around the existing
`MergeHelper::TimedFullMerge` that can store the merge result in either a string
(for the purposes of `Get`) or a `PinnableWideColumns` instance (for `GetEntity`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10894
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D40782708
Pulled By: ltamasi
fbshipit-source-id: 3d700d56b2ef81f02ba1e2d93f6481bf13abcc90
Summary:
This option allows a custom cleanup command line for a non-Posix file system to be used by db_crashtest.py to cleanup between runs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10883
Test Plan: Run the whitebox crash test
Reviewed By: pdillinger
Differential Revision: D40726424
Pulled By: anand1976
fbshipit-source-id: b827f6b583ff78f9ca75ced2d96f7e58f5200432
Summary:
It's unsafe to call `malloc_usable_size` with an address not returned by a function from the `malloc` family (see https://github.com/facebook/rocksdb/issues/10798). The patch switches from using `new[]` / `delete[]` for `LRUHandle` to `malloc` / `free`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10884
Test Plan: `make check`
Reviewed By: pdillinger
Differential Revision: D40738089
Pulled By: ltamasi
fbshipit-source-id: ac5583f88125fee49c314639be6b6df85937fbee
Summary:
Right now in MergingIterator, for each range tombstone start and end key, we pop one end from heap and push the other end into the heap. This involves extra downheap and upheap cost. In the likely cases when a range tombstone iterator emits relatively adjacent keys, these keys should have similar order within all keys in the heap. This can happen when there is a burst of consecutive range tombstones, and most of the keys covered by them are dropped already. This PR uses `replace_top()` when inserting new range tombstone keys, which is more efficient in these common cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10877
Test Plan:
- existing UT
- ran all flavors of stress test through sandcastle
- benchmark:
```
# Set up: --writes_per_range_tombstone=1 means one point write and one delete range
TEST_TMPDIR=/tmp/rocksdb-rangedel-test-all-tombstone ./db_bench --benchmarks=fillseq,levelstats --writes_per_range_tombstone=1 --max_num_range_tombstones=1000000 --range_tombstone_width=2 --num=100000000 --writes=800000 --max_bytes_for_level_base=4194304 --disable_auto_compactions --write_buffer_size=33554432 --key_size=64
Level Files Size(MB)
--------------------
0 8 152
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
# Benchmark
TEST_TMPDIR=/tmp/rocksdb-rangedel-test-all-tombstone/ ./db_bench --benchmarks=readseq[-W1][-X5],levelstats --use_existing_db=true --cache_size=3221225472 --num=100000000 --reads=1000000 --disable_auto_compactions=true --avoid_flush_during_recovery=true
# Pre PR
readseq [AVG 5 runs] : 1432116 (± 59664) ops/sec; 224.0 (± 9.3) MB/sec
readseq [MEDIAN 5 runs] : 1454886 ops/sec; 227.5 MB/sec
# Post PR
readseq [AVG 5 runs] : 1944425 (± 29521) ops/sec; 304.1 (± 4.6) MB/sec
readseq [MEDIAN 5 runs] : 1959430 ops/sec; 306.5 MB/sec
```
Reviewed By: ajkr
Differential Revision: D40710936
Pulled By: cbi42
fbshipit-source-id: cb782fb9cdcd26c0c3eb9443215a4ef4d2f79022
Summary:
Add some extra information in outputs of "sst_dump --command=raw" to help debug some issues. Right now, encoded block handle is printed out. It is more useful to directly print out offset and size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10873
Test Plan: Manually run it against a file and check the output.
Reviewed By: anand1976
Differential Revision: D40742289
fbshipit-source-id: 04d7de26e7f27e1595a7cc3ac1c1082e4e835b93
Andrew Kryczka