Summary:
Create new function NPHash64() and GetSliceNPHash64(), which are currently
implemented using murmurhash.
Replace the current direct call of murmurhash() to use the new functions
if the hash results are not used in on-disk format.
This will make it easier to try out or switch to alternative functions
in the uses where data format compatibility doesn't need to be considered.
This part shouldn't have any performance impact.
Also, the sharded cache hash function is changed to the new format, because
it falls into this categoery. It doesn't show visible performance impact
in db_bench results. CPU showed by perf is increased from about 0.2% to 0.4%
in an extreme benchmark setting (4KB blocks, no-compression, everything
cached in block cache). We've known that the current hash function used,
our own Hash() has serious hash quality problem. It can generate a lots of
conflicts with similar input. In this use case, it means extra lock contention
for reads from the same file. This slight CPU regression is worthy to me
to counter the potential bad performance with hot keys. And hopefully this
will get further improved in the future with a better hash function.
cache_test's condition is relaxed a little bit to. The new hash is slightly
more skewed in this use case, but I manually checked the data and see
the hash results are still in a reasonable range.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5155
Differential Revision: D14834821
Pulled By: siying
fbshipit-source-id: ec9a2c0a2f8ae4b54d08b13a5c2e9cc97aa80cb5
Summary:
Expose DB methods to lock and unlock the WAL.
These methods are intended to use by MyRocks in order to obtain WAL
coordinates in consistent way.
Usage scenario is following:
MySQL has performance_schema.log_status which provides information that
enables a backup tool to copy the required log files without locking for
the duration of copy. To populate this table MySQL does following:
1. Lock the binary log. Transactions are not allowed to commit now
2. Save the binary log coordinates
3. Walk through the storage engines and lock writes on each engine. For
InnoDB, redo log is locked. For MyRocks, WAL should be locked.
4. Ask storage engines for their coordinates. InnoDB reports its current
LSN and checkpoint LSN. MyRocks should report active WAL files names
and sizes.
5. Release storage engine's locks
6. Unlock binary log
Backup tool will then use this information to copy InnoDB, RocksDB and
MySQL binary logs up to specified positions to end up with consistent DB
state after restore.
Currently, RocksDB allows to obtain the list of WAL files. Only missing
bit is the method to lock the writes to WAL files.
LockWAL method must flush the WAL in order for the reported size to be
accurate (GetSortedWALFiles is using file system stat call to return the
file size), also, since backup tool is going to copy the WAL, it is
better to be flushed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5146
Differential Revision: D14815447
Pulled By: maysamyabandeh
fbshipit-source-id: eec9535a6025229ed471119f19fe7b3d8ae888a3
Summary:
cache functions heavily use virtual functions.
Add some "final" annotations to give compilers more information
to optimize. The compiler doesn't seem to take advantage of it
though. But it doesn't hurt.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5156
Differential Revision: D14814837
Pulled By: siying
fbshipit-source-id: 4423f58eafc93f7dd3c5f04b02b5c993dba2ea94
Summary:
The uncompression dictionary object has a Statistics pointer that might
dangle if the database closed. This patch evicts the dictionary from the
block cache when a table is closed, similarly to how index and filter
readers are handled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5150
Differential Revision: D14782422
Pulled By: ltamasi
fbshipit-source-id: 0cec9336c742c479aa92206e04521767f1aa9622
Summary:
- Some newer methods of Env weren't wrapped in EnvWrapper. Fixed.
- Added more wrapper classes similar to WritableFileWrapper: SequentialFileWrapper, RandomAccessFileWrapper, RandomRWFileWrapper, DirectoryWrapper, LoggerWrapper.
- Moved the code around a bit, removed some unused friendships, added some comments.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5131
Differential Revision: D14738932
Pulled By: al13n321
fbshipit-source-id: 99a9b1af28f2c629e7b7501389fa920b5ce30218
Summary:
Annotate all of the logging functions to inform the compiler that these
use printf-style formatting arguments. This allows the compiler to emit
warnings if the format arguments are incorrect.
This also fixes many problems reported now that format string checking
is enabled. Many of these are simply mix-ups in the argument type (e.g,
int vs uint64_t), but in several cases the wrong number of arguments
were being passed in which can cause the code to crash.
The primary motivation for this was to fix the log message in
`DBImpl::SwitchMemtable()` which caused a segfault due to an extra %s
format parameter with no argument supplied.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5089
Differential Revision: D14574795
Pulled By: simpkins
fbshipit-source-id: 0921b03f0743652bf4ae21e414ff54b3bb65422a
Summary:
mv port/dirent.h to port/port_dirent.h to avoid compile err when use port dir as header dir output
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5152
Differential Revision: D14779409
Pulled By: siying
fbshipit-source-id: d4162c47c979c6e8cc6a9e601802864ab3768ecb
Summary:
The ReadCallback was shared between all threads in IteratorWithLocalStatistics. A race condition was
hence introduced with recent changes that changes the content of ReadCallback. The patch fixes that by using a separate callback per thread.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5149
Differential Revision: D14761612
Pulled By: maysamyabandeh
fbshipit-source-id: 814a316aed046c318cb90e22379a6e32ac528949
Summary:
Ubsna complains that in initialization of WriteUnpreparedTxnReadCallback the method of the child class is used before the parent class is constructed. The patch fixes that by making the aforementioned method static.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5148
Differential Revision: D14760098
Pulled By: maysamyabandeh
fbshipit-source-id: cf19b7c1fdb5de0a54e62c1deebe09a0fa048ded
Summary:
Although user should first call StartTrace to begin the RocksDB tracing function and call EndTrace to stop the tracing process, user can accidentally call EndTrace first. It will cause segment fault and crash the DB instance. The issue is fixed by checking the pointer first.
Test case added in db_test2.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5130
Differential Revision: D14691420
Pulled By: zhichao-cao
fbshipit-source-id: 3be13d2f944bc453728ef8eef67b68d7ad0939c8
Summary:
This PR address two open issues:
1. clang analyzer is paranoid about db_ being nullptr after DB::Open calls in the test.
See https://github.com/facebook/rocksdb/pull/5043#discussion_r271394579
Add an assert to keep clang happy
2. PR https://github.com/facebook/rocksdb/pull/5049 introduced a variable shadowing:
```
db/db_iterator_test.cc: In constructor ‘rocksdb::DBIteratorWithReadCallbackTest_ReadCallback_Test::TestBody()::TestReadCallback::TestReadCallback(rocksdb::SequenceNumber)’:
db/db_iterator_test.cc:2484:9: error: declaration of ‘max_visible_seq’ shadows a member of 'this' [-Werror=shadow]
: ReadCallback(max_visible_seq) {}
^
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5140
Differential Revision: D14735497
Pulled By: miasantreble
fbshipit-source-id: 3219ea75cf4ae04f64d889323f6779e84be98144
Summary:
In prepare phase of 2PC, the db promises to remember the prepared data, for possible future commits. To fulfill the promise the prepared data must be persisted in the WAL so that they could be recovered after a crash. The log that contains a prepare batch that is not committed yet, is marked so that it is not garbage collected before the transaction commits/rollbacks. The bug was that the write to the log file and the mark of the file was not atomic, and WAL gc could have happened before the WAL log is actually marked. This patch moves the marking logic to PreReleaseCallback so that the WAL gc logic that joins both write threads would see the WAL write and WAL mark atomically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5121
Differential Revision: D14665210
Pulled By: maysamyabandeh
fbshipit-source-id: 1d66aeb1c66a296cb4899a5a20c4d40c59e4b534
Summary:
Since we are planning to use dictionary compression and to use different compression level, it is quite useful to add compression options to TableProperties. For example, in MyRocks, if the feature is available, we can query from information_schema.rocksdb_sst_props to see if all sst files are converted to ZSTD dictionary compressions. Resolves https://github.com/facebook/rocksdb/issues/4992
With this PR, user can query table properties through `GetPropertiesOfAllTables` API and get compression options as std::string:
`window_bits=-14; level=32767; strategy=0; max_dict_bytes=0; zstd_max_train_bytes=0; enabled=0;`
or table_properties->ToString() will also contain it
`# data blocks=1; # entries=13; # deletions=0; # merge operands=0; # range deletions=0; raw key size=143; raw average key size=11.000000; raw value size=39; raw average value size=3.000000; data block size=120; index block size (user-key? 0, delta-value? 0)=27; filter block size=0; (estimated) table size=147; filter policy name=N/A; prefix extractor name=nullptr; column family ID=0; column family name=default; comparator name=leveldb.BytewiseComparator; merge operator name=nullptr; property collectors names=[]; SST file compression algo=Snappy; SST file compression options=window_bits=-14; level=32767; strategy=0; max_dict_bytes=0; zstd_max_train_bytes=0; enabled=0; ; creation time=1552946632; time stamp of earliest key=1552946632;`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5081
Differential Revision: D14716692
Pulled By: miasantreble
fbshipit-source-id: 7d2f2cf84e052bff876e71b4212cfdebf5be32dd
Summary:
WriteUnPrepared adds a virtual function, MaxUnpreparedSequenceNumber, to ReadCallback, which returns 0 unless WriteUnPrepared is enabled and the transaction has uncommitted data written to the DB. Together with snapshot sequence number, this determines the last sequence that is visible to reads.
The patch clarifies the guarantees of the GetIterator API in WriteUnPrepared transactions and make use of that to statically initialize the read callback and thus avoid the virtual call.
Furthermore it increases the minimum value for min_uncommitted from 0 to 1 as seq 0 is used only for last level keys that are committed in all snapshots.
The following benchmark shows +0.26% higher throughput in seekrandom benchmark.
Benchmark:
./db_bench --benchmarks=fillrandom --use_existing_db=0 --num=1000000 --db=/dev/shm/dbbench
./db_bench --benchmarks=seekrandom[X10] --use_existing_db=1 --db=/dev/shm/dbbench --num=1000000 --duration=60 --seek_nexts=100
seekrandom [AVG 10 runs] : 20355 ops/sec; 225.2 MB/sec
seekrandom [MEDIAN 10 runs] : 20425 ops/sec; 225.9 MB/sec
./db_bench_lessvirtual3 --benchmarks=seekrandom[X10] --use_existing_db=1 --db=/dev/shm/dbbench --num=1000000 --duration=60 --seek_nexts=100
seekrandom [AVG 10 runs] : 20409 ops/sec; 225.8 MB/sec
seekrandom [MEDIAN 10 runs] : 20487 ops/sec; 226.6 MB/sec
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5049
Differential Revision: D14366459
Pulled By: maysamyabandeh
fbshipit-source-id: ebaff8908332a5ae9af7defeadabcb624be660ef
Summary:
I think when PR https://github.com/facebook/rocksdb/pull/4889 added the `IOSTATS_CPU_TIMER_GUARD` define to this header file, the noop version in the `#else` branch was forgotten.
Not sure if this is common, but on my MacOS machine it breaks my build
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5136
Differential Revision: D14727727
Pulled By: siying
fbshipit-source-id: 1076e56bdbe6ecda01d461b371dabf7f1593a149
Summary:
This reverts commit f29dc1b906.
In BlockBasedTableIterator, index_iter_->key() is sometimes a user key, so it is wrong to call ExtractUserKey() against it. This is a bug introduced by #5101.
Temporarily revert the diff to keep the branch clean.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5132
Differential Revision: D14718584
Pulled By: siying
fbshipit-source-id: 0ac55dc9b5dbc18c7809092146bdf7eb9364b9ad
Summary:
Just like ReadOptions::background_purge_on_iterator_cleanup but for ColumnFamilyHandle instead of Iterator.
In our use case we sometimes call ColumnFamilyHandle's destructor from low-latency threads, and sometimes it blocks the thread for a few seconds deleting the files. To avoid that, we can either offload ColumnFamilyHandle's destruction to a background thread on our side, or add this option on rocksdb side. This PR does the latter, to be consistent with how we solve exactly the same problem for iterators using background_purge_on_iterator_cleanup option.
(EDIT: It's avoid_unnecessary_blocking_io now, and affects both CF drops and iterator destructors.)
I'm not quite comfortable with having two separate options (background_purge_on_iterator_cleanup and background_purge_on_cf_cleanup) for such a rarely used thing. Maybe we should merge them? Rename background_purge_on_cf_cleanup to something like delete_files_on_background_threads_only or avoid_blocking_io_in_unexpected_places, and make iterators use it instead of the one in ReadOptions? I can do that here if you guys think it's better.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5043
Differential Revision: D14339233
Pulled By: al13n321
fbshipit-source-id: ccf7efa11c85c9a5b91d969bb55627d0fb01e7b8
Summary:
NewEmptyInternalIterator with arena mistakenly used EmptyIterator to allocate the size from area but then initialized it to a totally different object: EmptyInternalIterator. The patch fixes that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4905
Differential Revision: D14689840
Pulled By: maysamyabandeh
fbshipit-source-id: af64fd8ee93d5a4ad54691c792e5ecc5efabc887
Summary:
Compaction would depend on max_evicted_seq_ value. The ::Initialize method should do that after max_evicted_seq_ is properly initialized. The patch also back ports #4853 from WritePrepared txn to WriteUnPrepared.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5128
Differential Revision: D14686562
Pulled By: maysamyabandeh
fbshipit-source-id: b2355025712a72676ac3b20a95258adcf4774490
Summary:
`BlockBasedTableIterator` avoid reading next block on `Next()` if it detects the iterator will be out of bound, by checking against index key. The optimization was added in #2239, and by the time it only check the bound per block. It seems later change make it a per-key check, which introduce unnecessary key comparisons.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5101
Differential Revision: D14678707
Pulled By: siying
fbshipit-source-id: 2372446116753c7892ea4cec7b4b49ef87ba463e
Summary:
**This PR updates RepeatableThread::wait, breaking some tests on OS X. The rest of the PR fixes the tests on OS X.**
`RepeatableThreadTest.MockEnvTest` uses `MockTimeEnv` and `RepeatableThread`. If `RepeatableThread::wait` calls `TimedWait` with a time smaller than or equal to the current (real) time, `TimedWait` returns immediately on certain platforms, e.g. OS X. #4560 addresses this issue by replacing `TimedWait` with `Wait` in test. This fixes the test but makes test/production code diverge, which is not optimal for test coverage. This PR proposes an alternative fix which unifies test and production code path for `RepeatableThread::wait`. We obtain the current (real) time in seconds and add 10 extra seconds to ensure that `RepeatableThread::wait` invokes `TimedWait` with a time greater than (real) current time. This is to prevent the `TimedWait` function from returning immediately without sleeping and releasing the mutex. If `TimedWait` returns immediately, the mutex will not be released, and `RepeatableThread::TEST_WaitForRun` never has a chance to execute the callback which, in this case, updates the result returned by `mock_env->NowMicros()`. Consequently, `RepeatableThread::wait` cannot break out of the loop, causing test to hang. The extra 10 seconds is a best-effort approach because there seems no reliable and deterministic way to provide the aforementioned guarantee. By the time `RepeatableThread::wait` is called, there is no guarantee that the `delay + mock_env->NowMicros()` will be greater than the current real time. However, 10 seconds should be sufficient in most cases. We will keep an eye for possible flakiness of this test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5107
Differential Revision: D14680885
Pulled By: riversand963
fbshipit-source-id: d1ecbe10e1dacd110bd464cd01e188bfee72b89e
Summary:
Fix some hdfs-related code so that it can compile and run 'db_stress'
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5122
Differential Revision: D14675495
Pulled By: riversand963
fbshipit-source-id: cac280479efcf5451982558947eac1732e8bc45a
Summary:
WAL files are currently not subject to deletion rate limiting by DeleteScheduler. If the size of the WAL files is significant, this can cause a high delete rate on SSDs that may affect other operations. To fix it, force WAL file deletions to go through the SstFileManager. Original PR for this is #2768
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5116
Differential Revision: D14669437
Pulled By: anand1976
fbshipit-source-id: c5f62d0640cebaa1574de841a1d01e4ce2faadf0
Summary:
Allow customized merge operator to be loaded from option file/map/string
by allowing users to pre-regiester merge operators to object registry.
Also update HISTORY.md and header files for the same feature for comparator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5123
Differential Revision: D14658488
Pulled By: siying
fbshipit-source-id: 86ea2fbd2a0a04632d8ea9fceaffefd041f6ae61
Summary:
We see a failure of obsolete_files_test but aren't able to identify
the issue. Improve the test in following way and hope we can debug
better next time:
1. Place sync point before automatic compaction runs so race condition
will always trigger.
2. Disable sync point before test finishes.
3. ASSERT_OK() instead of ASSERT_TRUE(status.ok())
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5125
Differential Revision: D14669456
Pulled By: siying
fbshipit-source-id: dccb7648e334501ad651eb212880096eef1f4ab2
Summary:
Following files were run through automatic formatter:
db/db_impl.cc
db/db_impl.h
db/db_impl_compaction_flush.cc
db/db_impl_debug.cc
db/db_impl_files.cc
db/db_impl_readonly.h
db/db_impl_write.cc
db/dbformat.cc
db/dbformat.h
table/block.cc
table/block.h
table/block_based_filter_block.cc
table/block_based_filter_block.h
table/block_based_filter_block_test.cc
table/block_based_table_builder.cc
table/block_based_table_reader.cc
table/block_based_table_reader.h
table/block_builder.cc
table/block_builder.h
table/block_fetcher.cc
table/block_prefix_index.cc
table/block_prefix_index.h
table/block_test.cc
table/format.cc
table/format.h
I could easily run all the files, but I don't want people to feel that
I'm doing it for lines of code changes :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5114
Differential Revision: D14633040
Pulled By: siying
fbshipit-source-id: 3f346cb53bf21e8c10704400da548dfce1e89a52
Summary:
Automatically format public headers so it looks more consistent.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5115
Differential Revision: D14632854
Pulled By: siying
fbshipit-source-id: ce9929ea62f9dcd65c69660b23eed1931cb0ae84
Summary:
Currently `perf_context.user_key_comparison_count` is bump only in `InternalKeyComparator`. For places user comparator is used directly the counter is not bump. Fixing the majority of it.
Index iterator and filter code also use user comparator directly and don't bump the counter. It is not fixed in this patch.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5098
Differential Revision: D14603753
Pulled By: siying
fbshipit-source-id: 1cd41035644ca9e49b97a51030a5d1e15f5f3cae
Summary:
The code convention we are following, Google C++ Style, discourage
alias in header files, especially public headers:
https://google.github.io/styleguide/cppguide.html#Aliases
Remove some of them. Might removed some from .cc files as well to be consistent.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5113
Differential Revision: D14633030
Pulled By: siying
fbshipit-source-id: b990edc919d5de60295992284f980195e501d424
Summary:
This PR allows RocksDB to run in single-primary, multi-secondary process mode.
The writer is a regular RocksDB (e.g. an `DBImpl`) instance playing the role of a primary.
Multiple `DBImplSecondary` processes (secondaries) share the same set of SST files, MANIFEST, WAL files with the primary. Secondaries tail the MANIFEST of the primary and apply updates to their own in-memory state of the file system, e.g. `VersionStorageInfo`.
This PR has several components:
1. (Originally in #4745). Add a `PathNotFound` subcode to `IOError` to denote the failure when a secondary tries to open a file which has been deleted by the primary.
2. (Similar to #4602). Add `FragmentBufferedReader` to handle partially-read, trailing record at the end of a log from where future read can continue.
3. (Originally in #4710 and #4820). Add implementation of the secondary, i.e. `DBImplSecondary`.
3.1 Tail the primary's MANIFEST during recovery.
3.2 Tail the primary's MANIFEST during normal processing by calling `ReadAndApply`.
3.3 Tailing WAL will be in a future PR.
4. Add an example in 'examples/multi_processes_example.cc' to demonstrate the usage of secondary RocksDB instance in a multi-process setting. Instructions to run the example can be found at the beginning of the source code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4899
Differential Revision: D14510945
Pulled By: riversand963
fbshipit-source-id: 4ac1c5693e6012ad23f7b4b42d3c374fecbe8886
Summary:
fbson library is still included in `third-party` directory, but is not needed by RocksDB anymore.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5108
Differential Revision: D14622272
Pulled By: siying
fbshipit-source-id: 52b24ed17d8d870a71364f85e5bac4eafb192df5
Summary:
Introduce CPU timers for iterator seek and next operations. Seek
counter includes SeekToFirst, SeekToLast and SeekForPrev, w/ the
caveat that SeekToLast timer doesn't include some post processing
time if upper bound is defined.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5076
Differential Revision: D14525218
Pulled By: fredfsh
fbshipit-source-id: 03ba25df3b22b06c072621e4de0eacfa1445f0d9
Summary:
Even customized ldb may not be able to read data from some databases if
comparator is not standard. We modify option helper to get comparator from
object registry so that we can use customized ldb to read non-standard
comparator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5106
Differential Revision: D14622107
Pulled By: siying
fbshipit-source-id: 151dcb295a35a4c7d54f919cd4e322a89dc601c9
Summary:
Right now, BlobDB::Open() fails to put all trash files to delete scheduler,
which causes some trash files permanently untracked.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5103
Differential Revision: D14606095
Pulled By: siying
fbshipit-source-id: 41a9437a2948abb235c0ed85f9a04612d0e50183
Summary:
Since `SstFileReader` don't know largest seqno of a file, it will fail this check when it open a file with global seqno: ca89ac2ba9/table/block_based_table_reader.cc (L730)
Changes:
* Pass largest_seqno=kMaxSequenceNumber from `SstFileReader` and allow it to bypass the above check.
* `BlockBasedTable::VerifyChecksum` also double check if checksum will match when excluding global seqno (this is to make the new test in sst_table_reader_test pass).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5097
Differential Revision: D14607434
Pulled By: riversand963
fbshipit-source-id: 9008599227c5fccbf9b73fee46b3bf4a1523f023
Summary:
User report has shown that sometimes `BlockBasedTable::SetupCacheKeyPrefix` would assert when trying to generate an id from the file. The actual cause seems to be hardware related but we might be better off without the incorrect assertion
See T42178927 for more information
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5102
Differential Revision: D14604677
Pulled By: miasantreble
fbshipit-source-id: fcb09207ebdc4fa66e941afbc0523d84797e7ad7
Summary:
With https://github.com/facebook/rocksdb/pull/3009 we go through every CF
to check whether a bottommost compaction is needed to be triggered. This is done
within DB mutex. What we do within DB mutex may heavily influece the write throughput
we can achieve, so we always want to minimize work there.
Here we try to avoid this for-loop by first check a global threshold. In most of
the time, the CF loop can be avoided.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5090
Differential Revision: D14582684
Pulled By: siying
fbshipit-source-id: 968f6d9bb6affe1a5ebc4910b418300b076f166f
Summary:
Right now ldb command doesn't allow cases where option values contain equals sign. For example,
```
ldb --db=/tmp/test scan --from='q=3' --max_keys=1
```
after parsing, ldb will have one option 'db', 'max_keys' and one flag 'from'.
This PR updates the parsing logic so that it now supports the above mentioned cases
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5088
Differential Revision: D14600869
Pulled By: miasantreble
fbshipit-source-id: c6ef518c74a98d7b6675ea5954ae08b1bda5554e
Summary:
[RocksDB] Make it easier for users to load options from option file and set shared block cache.
Right now, it requires several dynamic casting for users to set the shared block cache to their option struct cast from the option file.
If people don't do that, every CF of every DB will generate its own 8MB block cache. It's not a usable setting. So we are dragging every user who loads options from the file into such a mess.
Instead, we should allow them to pass their cache object to LoadLatestOptions() and LoadOptionsFromFile(), so that those loaded option structs will have the shared block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5063
Differential Revision: D14518584
Pulled By: rashmishrm
fbshipit-source-id: c91430ff9425a0e67d76fc67931d755f491ca5aa
Summary:
The original implementation of WinEnvIO::NowNanos() has a constant data overflow by:
li.QuadPart *= std::nano::den;
As a result, the api provides a incorrect result.
e.g.:
li.QuadPart=13477844301545
std::nano::den=1e9
The fix uses pre-computed nano_seconds_per_period_ to present the nano seconds per performance counter period, in the case if nano::den is divisible by perf_counter_frequency_. Otherwise it falls back to use high_resolution_clock.
siying ajkr
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5062
Differential Revision: D14426842
Pulled By: anand1976
fbshipit-source-id: 127f1daf423dd4b30edd0dcf8ea0466f468bec12
Summary:
The patch reorders DBIter fields to put 1-byte fields together and let the compiler optimize the memory usage by using less 64-bit allocations for bools and enums.
This might have a negative side effect of putting the variables that are accessed together into different cache lines and hence increasing the cache misses. Not sure what benchmark would verify that thought. I ran simple, single-threaded seekrandom benchmarks but the variance in the results is too much to be conclusive.
./db_bench --benchmarks=fillrandom --use_existing_db=0 --num=1000000 --db=/dev/shm/dbbench
./db_bench --benchmarks=seekrandom[X10] --use_existing_db=1 --db=/dev/shm/dbbench --num=1000000 --duration=60 --seek_nexts=100
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5078
Differential Revision: D14562676
Pulled By: maysamyabandeh
fbshipit-source-id: 2284655d46e079b6e9a860e94be5defb6f482167
Summary:
The patch adds a new config option to LRUCacheOptions that enables
users to choose whether to use an adaptive mutex for the LRU block
cache (on platforms where adaptive mutexes are supported). The default
is true if RocksDB is compiled with -DROCKSDB_DEFAULT_TO_ADAPTIVE_MUTEX,
false otherwise.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5054
Differential Revision: D14542749
Pulled By: ltamasi
fbshipit-source-id: 0065715ab6cf91f10444b737fed8c8aee6a8a0d2
Siying Dong