Summary:
In latest leaf's, MayContainHash() consistently consumes 5%~7% CPU usage.
I checked the code and did an experiment with/without inlining this method.
In release mode, with `1024 * 1024 * 256` bits and `1024 * 512` entries, both call 2^30 MayContainHash() with distinctive parameters.
As the result showed, this patch reduced the running time from 9.127 sec to 7.891 sec.
Test Plan: make check
Reviewers: sdong, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15177
Summary:
When doing CompactRange(), we should first flush the memtable and then calculate max_level_with_files. Also, we want to compact all the levels that have files, including level `max_level_with_files`.
This patch fixed the unit test.
Test Plan: Added a failing unit test and a fix, so it's not failing anymore.
Reviewers: dhruba, haobo, sdong
Reviewed By: haobo
CC: leveldb, xjin
Differential Revision: https://reviews.facebook.net/D14421
Summary: The application can set a callback function, which is applied on the previous value. And calculates the new value. This new value can be set, either inplace, if the previous value existed in memtable, and new value is smaller than previous value. Otherwise the new value is added normally.
Test Plan: fbmake. Added unit tests. All unit tests pass.
Reviewers: dhruba, haobo
Reviewed By: haobo
CC: sdong, kailiu, xinyaohu, sumeet, leveldb
Differential Revision: https://reviews.facebook.net/D14745
Summary:
Added an option (max_successive_merges) that can be used to specify the
maximum number of successive merge operations on a key in the memtable.
This can be used to improve performance of the "get" operation. If many
successive merge operations are performed on a key, the performance of "get"
operations on the key deteriorates, as the value has to be computed for each
"get" operation by applying all the successive merge operations.
FB Task ID: #3428853
Test Plan:
make all check
db_bench --benchmarks=readrandommergerandom
counter_stress_test
Reviewers: haobo, vamsi, dhruba, sdong
Reviewed By: haobo
CC: zshao
Differential Revision: https://reviews.facebook.net/D14991
Summary: Full list constructed for full iterator can be leaked. This was a bug introduced when I copy the full iterator codes from hash skip list to hash link list. This patch fixes it.
Test Plan: Run valgrind test against db_test and make sure the memory leak is fixed
Reviewers: kailiu, haobo
Reviewed By: kailiu
CC: igor, leveldb
Differential Revision: https://reviews.facebook.net/D15093
Summary: Currently, even if statistics is not enabled, StopWatch only for the stats still gets the time of the day, which is wasteful. This patch adds a new option to StopWatch to disable this get in this case.
Test Plan: make all check
Reviewers: dhruba, haobo, igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14703
Conflicts:
db/db_impl.cc
Summary:
Implement a mem table, in which keys are hashed based on prefixes. In each bucket, entries are organized in a sorted linked list. It has the same thread safety guarantee as skip list.
The motivation is to optimize memory usage for the case that prefix hashing is primary way of seeking to the entry. Compared to hash skip list implementation, this implementation is more memory efficient, but inside each bucket, search is always linear. The target scenario is that there are only very limited number of records in each hash bucket.
Test Plan: Add a test case in db_test
Reviewers: haobo, kailiu, dhruba
Reviewed By: haobo
CC: igor, nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D14979
Summary: Currently, even if statistics is not enabled, StopWatch only for the stats still gets the time of the day, which is wasteful. This patch adds a new option to StopWatch to disable this get in this case.
Test Plan: make all check
Reviewers: dhruba, haobo, igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14703
Summary: Use two vectors for different types of memory allocation.
Test Plan: run all unit tests.
Reviewers: haobo, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15027
Summary:
In addition to implementing OpenWithColumnFamilies, this diff also includes some minor changes:
* Changed all column family names from Slice() to std::string. The performance of column family name handling is not critical, and it's more convenient and cleaner to have names as std::strings
* Implemented ColumnFamilyOptions(const Options&) and DBOptions(const Options&)
* Added ColumnFamilyOptions to VersionSet::ColumnFamilyData. ColumnFamilyOptions are specified on OpenWithColumnFamilies() and CreateColumnFamily()
I will keep the diff in the Phabricator for a day or two and will push to the branch then. Feel free to comment even after the diff has been pushed.
Test Plan: Added a simple unit test
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15033
This seems out of place as it's the only time RocksDB prints to stdout in the
normal course of operations. Thread IDs can still be retrieved from the LOG
file: cut -d ' ' -f2 LOG | sort | uniq | egrep -x '[0-9a-f]+'
Summary: this diff only replace the cases when we need to frequently create vector with small amount of entries. This diff doesn't aim to improve performance of a specific area, but more like a small scale test for the autovector and see how it works in real life.
Test Plan:
make check
I also ran the performance tests, however there is no performance gain/loss. All performance numbers are pretty much the same before/after the change.
Reviewers: dhruba, haobo, sdong, igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14985
Summary:
In some places we have NotFound status created with empty message, but it doesn't avoid a malloc. With this patch, the malloc is avoided for that case.
The motivation of it is that I found in db_bench readrandom test when all keys are not existing, about 4% of the total running time is spent on malloc of Status, plus a similar amount of CPU spent on free of them, which is not necessary.
Test Plan: make all check
Reviewers: dhruba, haobo, igor
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14691
Summary:
A vector that leverages pre-allocated stack-based array to achieve better
performance for array with small amount of items.
Test Plan:
Added tests for both correctness and performance
Here is the performance benchmark between vector and autovector
Please note that in the test "Creation and Insertion Test", the test case were designed with the motivation described below:
* no element inserted: internal array of std::vector may not really get
initialize.
* one element inserted: internal array of std::vector must have
initialized.
* kSize elements inserted. This shows the most time we'll spend if we
keep everything in stack.
* 2 * kSize elements inserted. The internal vector of
autovector must have been initialized.
Note: kSize is the capacity of autovector
=====================================================
Creation and Insertion Test
=====================================================
created 100000 vectors:
each was inserted with 0 elements
total time elapsed: 128000 (ns)
created 100000 autovectors:
each was inserted with 0 elements
total time elapsed: 3641000 (ns)
created 100000 VectorWithReserveSizes:
each was inserted with 0 elements
total time elapsed: 9896000 (ns)
-----------------------------------
created 100000 vectors:
each was inserted with 1 elements
total time elapsed: 11089000 (ns)
created 100000 autovectors:
each was inserted with 1 elements
total time elapsed: 5008000 (ns)
created 100000 VectorWithReserveSizes:
each was inserted with 1 elements
total time elapsed: 24271000 (ns)
-----------------------------------
created 100000 vectors:
each was inserted with 4 elements
total time elapsed: 39369000 (ns)
created 100000 autovectors:
each was inserted with 4 elements
total time elapsed: 10121000 (ns)
created 100000 VectorWithReserveSizes:
each was inserted with 4 elements
total time elapsed: 28473000 (ns)
-----------------------------------
created 100000 vectors:
each was inserted with 8 elements
total time elapsed: 75013000 (ns)
created 100000 autovectors:
each was inserted with 8 elements
total time elapsed: 18237000 (ns)
created 100000 VectorWithReserveSizes:
each was inserted with 8 elements
total time elapsed: 42464000 (ns)
-----------------------------------
created 100000 vectors:
each was inserted with 16 elements
total time elapsed: 102319000 (ns)
created 100000 autovectors:
each was inserted with 16 elements
total time elapsed: 76724000 (ns)
created 100000 VectorWithReserveSizes:
each was inserted with 16 elements
total time elapsed: 68285000 (ns)
-----------------------------------
=====================================================
Sequence Access Test
=====================================================
performed 100000 sequence access against vector
size: 4
total time elapsed: 198000 (ns)
performed 100000 sequence access against autovector
size: 4
total time elapsed: 306000 (ns)
-----------------------------------
performed 100000 sequence access against vector
size: 8
total time elapsed: 565000 (ns)
performed 100000 sequence access against autovector
size: 8
total time elapsed: 512000 (ns)
-----------------------------------
performed 100000 sequence access against vector
size: 16
total time elapsed: 1076000 (ns)
performed 100000 sequence access against autovector
size: 16
total time elapsed: 1070000 (ns)
-----------------------------------
Reviewers: dhruba, haobo, sdong, chip
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14655
Summary:
Some changes to PlainTable format:
(1) support variable key length
(2) use user defined slice transformer to extract prefixes
(3) Run some test cases against PlainTable in db_test and table_test
Test Plan: test db_test
Reviewers: haobo, kailiu
CC: dhruba, igor, leveldb, nkg-
Differential Revision: https://reviews.facebook.net/D14457
Summary:
<This diff is for Column Family branch>
Sharing some of the work I've done so far. This diff compiles and passes the tests.
The biggest change is in options.h - I broke down Options into two parts - DBOptions and ColumnFamilyOptions. DBOptions is DB-specific (env, create_if_missing, block_cache, etc.) and ColumnFamilyOptions is column family-specific (all compaction options, compresion options, etc.). Note that this does not break backwards compatibility at all.
Further, I created DBWithColumnFamily which inherits DB interface and adds new functions with column family support. Clients can transparently switch to DBWithColumnFamily and it will not break their backwards compatibility.
There are few methods worth checking out: ListColumnFamilies(), MultiNewIterator(), MultiGet() and GetSnapshot(). [GetSnapshot() returns the snapshot across all column families for now - I think that's what we agreed on]
Finally, I made small changes to WriteBatch so we are able to atomically insert data across column families.
Please provide feedback.
Test Plan: make check works, the code is backward compatible
Reviewers: dhruba, haobo, sdong, kailiu, emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14445
Summary:
By disassemble the function, we found that the atomic variables do invoke the `lock` that locks the memory bus.
As a tradeoff, we protect the GetUsage by mutex and leave usage_ as plain size_t.
Test Plan: passed `cache_test`
Reviewers: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14667
Summary: make release complains signed unsigned comparison.
Test Plan: make release
Reviewers: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14661
Summary: This diff will help us to figure out the memory usage for the cache part.
Test Plan: added a new memory usage test for cache
Reviewers: haobo, sdong, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14559
Summary:
I have ran a get benchmark where all the data is in the cache and observed that most of the time is spent on waiting for lock in LRUCache.
This is an effort to optimize LRUCache.
Test Plan:
The data was loaded with fillseq. Then, I ran a benchmark:
/db_bench --db=/tmp/rocksdb_stat_bench --num=1000000 --benchmarks=readrandom --statistics=1 --use_existing_db=1 --threads=16 --disable_seek_compaction=1 --cache_size=20000000000 --cache_numshardbits=8 --table_cache_numshardbits=8
I ran the benchmark three times. Here are the results:
AFTER THE PATCH: 798072, 803998, 811807
BEFORE THE PATCH: 782008, 815593, 763017
Reviewers: dhruba, haobo, kailiu
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14571
Summary: as title
Test Plan: dynamic_bloom_test
Reviewers: dhruba, sdong, kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14385
Summary: This will allow us to access constant via `DB::GetOptions().table_cache.GetCapacity()` or `DB::GetOptions().block_cache.GetCapacity()` since GetOptions() is also constant method.
Summary: So fflush() takes a lock which is heavyweight. I added flush_pending_, but more importantly, I removed LogFlush() from foreground threads.
Test Plan: ./db_test
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14535
Summary:
In this diff I present you BackupableDB v1. You can easily use it to backup your DB and it will do incremental snapshots for you.
Let's first describe how you would use BackupableDB. It's inheriting StackableDB interface so you can easily construct it with your DB object -- it will add a method RollTheSnapshot() to the DB object. When you call RollTheSnapshot(), current snapshot of the DB will be stored in the backup dir. To restore, you can just call RestoreDBFromBackup() on a BackupableDB (which is a static method) and it will restore all files from the backup dir. In the next version, it will even support automatic backuping every X minutes.
There are multiple things you can configure:
1. backup_env and db_env can be different, which is awesome because then you can easily backup to HDFS or wherever you feel like.
2. sync - if true, it *guarantees* backup consistency on machine reboot
3. number of snapshots to keep - this will keep last N snapshots around if you want, for some reason, be able to restore from an earlier snapshot. All the backuping is done in incremental fashion - if we already have 00010.sst, we will not copy it again. *IMPORTANT* -- This is based on assumption that 00010.sst never changes - two files named 00010.sst from the same DB will always be exactly the same. Is this true? I always copy manifest, current and log files.
4. You can decide if you want to flush the memtables before you backup, or you're fine with backing up the log files -- either way, you get a complete and consistent view of the database at a time of backup.
5. More things you can find in BackupableDBOptions
Here is the directory structure I use:
backup_dir/CURRENT_SNAPSHOT - just 4 bytes holding the latest snapshot
0, 1, 2, ... - files containing serialized version of each snapshot - containing a list of files
files/*.sst - sst files shared between snapshots - if one snapshot references 00010.sst and another one needs to backup it from the DB, it will just reference the same file
files/ 0/, 1/, 2/, ... - snapshot directories containing private snapshot files - current, manifest and log files
All the files are ref counted and deleted immediatelly when they get out of scope.
Some other stuff in this diff:
1. Added GetEnv() method to the DB. Discussed with @haobo and we agreed that it seems right thing to do.
2. Fixed StackableDB interface. The way it was set up before, I was not able to implement BackupableDB.
Test Plan:
I have a unittest, but please don't look at this yet. I just hacked it up to help me with debugging. I will write a lot of good tests and update the diff.
Also, `make asan_check`
Reviewers: dhruba, haobo, emayanke
Reviewed By: dhruba
CC: leveldb, haobo
Differential Revision: https://reviews.facebook.net/D14295
Summary:
This will help me a lot! When we hit an assertion in unittest, we get the whole stack trace now.
Also, changed stack trace a bit, we now include actual demangled C++ class::function symbols!
Test Plan: Added ASSERT_TRUE(false) to a test, observed a stack trace
Reviewers: haobo, dhruba, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14499
Summary:
This adds 2 options for compression to db_bench:
* universal_compression_size_percent
* compression_level - to set zlib compression level
It also logs compression_size_percent at startup in LOG
Task ID: #
Blame Rev:
Test Plan:
make check, run db_bench
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14439
Summary:
Let's get rid of TransformRep and it's children. We have confirmed that HashSkipListRep works better with multifeed, so there is no benefit to keeping this around.
This diff is mostly just deleting references to obsoleted functions. I also have a diff for fbcode that we'll need to push when we switch to new release.
I had to expose HashSkipListRepFactory in the client header files because db_impl.cc needs access to GetTransform() function for SanitizeOptions.
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14397
Summary: The preprocessor does not follow normal rules of && evaluation, tries to evaluate __GLIBC_PREREQ(2, 12) even though the defined() check fails. This breaks the build if __GLIBC_PREREQ is absent.
Test Plan: Try adding #undef __GLIBC_PREREQ above the offending line, build no longer breaks
Reviewed By: igor
Blame Rev: 4c81383628
Summary: Makes it easier to monitor performance with top
Test Plan: ./manual_compaction_test with `top -H` running. Previously was two `manual_compacti`, now one shows `rocksdb:bg0`.
Reviewers: igor, dhruba
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14367
Summary: As title. Especially, HashSkipListRepFactory will be able to specify a relatively small height, to reduce the memory overhead of one skiplist per bucket.
Test Plan: make check and test it on leaf4
Reviewers: dhruba, sdong, kailiu
CC: reconnect.grayhat, leveldb
Differential Revision: https://reviews.facebook.net/D14307
Summary:
Fix a stupid bug I just introduced in b59d4d5a50, which I didn't even mean to include.
GCC might remove the munmap.
Test Plan: Run it and make sure munmap succeeds
Reviewers: haobo, kailiu
Reviewed By: kailiu
CC: dhruba, reconnect.grayhat, leveldb
Differential Revision: https://reviews.facebook.net/D14361
Summary: liveness of the statistics object is already ensured by the shared pointer in DB options. There's no reason to pass again shared pointer among internal functions. Raw pointer is sufficient and efficient.
Test Plan: make check
Reviewers: dhruba, MarkCallaghan, igor
Reviewed By: dhruba
CC: leveldb, reconnect.grayhat
Differential Revision: https://reviews.facebook.net/D14289
Summary:
Provide a framework to profile a query in detail to figure out latency bottleneck. Currently, in Get(), Put() and iterators, 2-3 simple timing is used. We can easily add more profile counters to the framework later.
Test Plan: Enable this profiling in seveal existing tests.
Reviewers: haobo, dhruba, kailiu, emayanke, vamsi, igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14001
Conflicts:
table/merger.cc
Summary:
Provide a framework to profile a query in detail to figure out latency bottleneck. Currently, in Get(), Put() and iterators, 2-3 simple timing is used. We can easily add more profile counters to the framework later.
Test Plan: Enable this profiling in seveal existing tests.
Reviewers: haobo, dhruba, kailiu, emayanke, vamsi, igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14001
Summary:
For prefix mem tables, encoding mem table key may be unnecessary if the prefix doesn't have any key. This patch is a little bit hacky but I want to try out the performance gain of removing this lazy initialization.
In longer term, we might want to revisit the way we abstract mem tables implementations.
Test Plan: make all check
Reviewers: haobo, igor, kailiu
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14265
Summary:
A Simple plain table format. No block structure. When creating the table reader, scanning the full table to create indexes.
Test Plan:Add unit test
Reviewers:haobo,dhruba,kailiu
CC:
Task ID: #
Blame Rev:
Summary:
Previously we introduce a `flush_block_policy_factory` in Options, however, that options is strongly releated to Table based tables.
It will make more sense to move it to block based table's own factory class.
Test Plan: make check to pass existing tests
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14211
Summary:
The primary motivation of the changes is to make it easier to figure out the inside of the tables.
* rename "table stats" to "table properties" since now we have more than "integers" to store in the property block.
* Add filter block size to the basic table properties.
* Whenever a table is built, we'll log the table properties (the sample output is in Test Plan).
* Make an api to expose deleted keys.
Test Plan:
Passed all existing test. and the sample output of table stats:
==================================================================
Basic Properties
------------------------------------------------------------------
# data blocks: 1
# entries: 1
raw key size: 9
raw average key size: 9
raw value size: 9
raw average value size: 0
data block size: 25
index block size: 27
filter block size: 18
(estimated) table size: 70
filter policy: rocksdb.BuiltinBloomFilter
==================================================================
User collected properties: InternalKeyPropertiesCollector
------------------------------------------------------------------
kDeletedKeys: 1
==================================================================
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14187
Kai Liu