Summary:
The patch adds checks to the
`{NonBatchedOps,BatchedOps,CfConsistency}StressTest::TestPrefixScan` methods
to make sure the wide columns exposed by the iterators are as expected (based on
the value base encoded into the iterator value). It also makes some code hygiene
improvements in these methods.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10786
Test Plan:
Ran some simple blackbox tests in the various modes (non-batched, batched,
CF consistency).
Reviewed By: riversand963
Differential Revision: D40163623
Pulled By: riversand963
fbshipit-source-id: 72f4c3b51063e48c15f974c4ec64d751d3ed0a83
Summary:
The patch adds the `PutEntity` API to the non-batched, batched, and
CF consistency stress tests. Namely, when the new `db_stress` command
line parameter `use_put_entity_one_in` is greater than zero, one in
N writes on average is performed using `PutEntity` rather than `Put`.
The wide-column entity written has the generated value in its default
column; in addition, it contains up to three additional columns where
the original generated value is divided up between the column name and the
column value (with the column name containing the first k characters of
the generated value, and the column value containing the rest). Whether
`PutEntity` is used (and if so, how many columns the entity has) is completely
determined by the "value base" used to generate the value (that is, there is
no randomness involved). Assuming the same `use_put_entity_one_in` setting
is used across `db_stress` invocations, this enables us to reconstruct and
validate the entity during subsequent `db_stress` runs.
Note that `PutEntity` is currently incompatible with `Merge`, transactions, and
user-defined timestamps; these combinations are currently disabled/disallowed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10760
Test Plan: Ran some batched, non-batched, and CF consistency stress tests using the script.
Reviewed By: riversand963
Differential Revision: D39939032
Pulled By: ltamasi
fbshipit-source-id: eafdf124e95993fb7d73158e3b006d11819f7fa9
Summary:
One problem of the previous strategy was `NonBatchedOpsStressTest::TestIngestExternalFile()` could release the lock for `rand_keys[0]` in `rand_column_families[0]`, and then subsequent operations in the same loop iteration (e.g., `TestPut()`) would run without locking. This PR changes the strategy so each `Test*()` function is responsible for acquiring and releasing its own locks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10678
Reviewed By: hx235
Differential Revision: D39516401
Pulled By: ajkr
fbshipit-source-id: bf67f12ebbd293ba8c24fdf8754ff28737bcd758
Summary:
**Context/Summary:**
https://github.com/facebook/rocksdb/pull/9424 added rate-limiting support for user reads, which does not include batched `MultiGet()`s that call `RandomAccessFileReader::MultiRead()`. The reason is that it's harder (compared with RandomAccessFileReader::Read()) to implement the ideal rate-limiting where we first call `RateLimiter::RequestToken()` for allowed bytes to multi-read and then consume those bytes by satisfying as many requests in `MultiRead()` as possible. For example, it can be tricky to decide whether we want partially fulfilled requests within one `MultiRead()` or not.
However, due to a recent urgent user request, we decide to pursue an elementary (but a conditionally ineffective) solution where we accumulate enough rate limiter requests toward the total bytes needed by one `MultiRead()` before doing that `MultiRead()`. This is not ideal when the total bytes are huge as we will actually consume a huge bandwidth from rate-limiter causing a burst on disk. This is not what we ultimately want with rate limiter. Therefore a follow-up work is noted through TODO comments.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10159
Test Plan:
- Modified existing unit test `DBRateLimiterOnReadTest/DBRateLimiterOnReadTest.NewMultiGet`
- Traced the underlying system calls `io_uring_enter` and verified they are 10 seconds apart from each other correctly under the setting of `strace -ftt -e trace=io_uring_enter ./db_bench -benchmarks=multireadrandom -db=/dev/shm/testdb2 -readonly -num=50 -threads=1 -multiread_batched=1 -batch_size=100 -duration=10 -rate_limiter_bytes_per_sec=200 -rate_limiter_refill_period_us=1000000 -rate_limit_bg_reads=1 -disable_auto_compactions=1 -rate_limit_user_ops=1` where each `MultiRead()` read about 2000 bytes (inspected by debugger) and the rate limiter grants 200 bytes per seconds.
- Stress test:
- Verified `./db_stress (-test_cf_consistency=1/test_batches_snapshots=1) -use_multiget=1 -cache_size=1048576 -rate_limiter_bytes_per_sec=10241024 -rate_limit_bg_reads=1 -rate_limit_user_ops=1` work
Reviewed By: ajkr, anand1976
Differential Revision: D37135172
Pulled By: hx235
fbshipit-source-id: 73b8e8f14761e5d4b77235dfe5d41f4eea968bcd
Summary:
This PR updates secondary instance testing in stress test by default.
A background thread will be started (disabled by default), running a secondary instance tailing the logs of the primary.
Periodically (every 1 sec), this thread calls `TryCatchUpWithPrimary()` and uses point lookup or range scan
to read some random keys with only very basic verification to make sure no assertion failure is triggered.
Thanks to https://github.com/facebook/rocksdb/issues/10061 , we can enable secondary instance when user-defined timestamp is enabled.
Also removed a less useful test configuration, `secondary_catch_up_one_in`. This is very similar to the periodic
catch-up.
In the last commit, I decided not to enable it now, but just update the tests, since secondary instance does not
work well when the underlying file is renamed by primary, e.g. SstFileManager.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10121
Test Plan:
```
TEST_TMPDIR=/dev/shm/rocksdb make crash_test
TEST_TMPDIR=/dev/shm/rocksdb make crash_test_with_ts
TEST_TMPDIR=/dev/shm/rocksdb make crash_test_with_atomic_flush
```
Reviewed By: ajkr
Differential Revision: D36939458
Pulled By: riversand963
fbshipit-source-id: 1c065b7efc3690fc341569b9d369a5cbd8ef6b3e
Summary:
ajkr reminded me that we have a rule of not including per-kv related data in `WriteOptions`.
Namely, `WriteOptions` should not include information about "what-to-write", but should just
include information about "how-to-write".
According to this rule, `WriteOptions::timestamp` (experimental) is clearly a violation. Therefore,
this PR removes `WriteOptions::timestamp` for compliance.
After the removal, we need to pass timestamp info via another set of APIs. This PR proposes a set
of overloaded functions `Put(write_opts, key, value, ts)`, `Delete(write_opts, key, ts)`, and
`SingleDelete(write_opts, key, ts)`. Planned to add `Write(write_opts, batch, ts)`, but its complexity
made me reconsider doing it in another PR (maybe).
For better checking and returning error early, we also add a new set of APIs to `WriteBatch` that take
extra `timestamp` information when writing to `WriteBatch`es.
These set of APIs in `WriteBatchWithIndex` are currently not supported, and are on our TODO list.
Removed `WriteBatch::AssignTimestamps()` and renamed `WriteBatch::AssignTimestamp()` to
`WriteBatch::UpdateTimestamps()` since this method require that all keys have space for timestamps
allocated already and multiple timestamps can be updated.
The constructor of `WriteBatch` now takes a fourth argument `default_cf_ts_sz` which is the timestamp
size of the default column family. This will be used to allocate space when calling APIs that do not
specify a column family handle.
Also, updated `DB::Get()`, `DB::MultiGet()`, `DB::NewIterator()`, `DB::NewIterators()` methods, replacing
some assertions about timestamp to returning Status code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8946
Test Plan:
make check
./db_bench -benchmarks=fillseq,fillrandom,readrandom,readseq,deleterandom -user_timestamp_size=8
./db_stress --user_timestamp_size=8 -nooverwritepercent=0 -test_secondary=0 -secondary_catch_up_one_in=0 -continuous_verification_interval=0
Make sure there is no perf regression by running the following
```
./db_bench_opt -db=/dev/shm/rocksdb -use_existing_db=0 -level0_stop_writes_trigger=256 -level0_slowdown_writes_trigger=256 -level0_file_num_compaction_trigger=256 -disable_wal=1 -duration=10 -benchmarks=fillrandom
```
Before this PR
```
DB path: [/dev/shm/rocksdb]
fillrandom : 1.831 micros/op 546235 ops/sec; 60.4 MB/s
```
After this PR
```
DB path: [/dev/shm/rocksdb]
fillrandom : 1.820 micros/op 549404 ops/sec; 60.8 MB/s
```
Reviewed By: ltamasi
Differential Revision: D33721359
Pulled By: riversand963
fbshipit-source-id: c131561534272c120ffb80711d42748d21badf09
Summary:
When `--sync_fault_injection` is set, this PR takes a snapshot of the expected values and starts an operation trace when the DB is opened. These files are stored in `--expected_values_dir`. They will be used for recovering the expected state of the DB following a crash where a suffix of unsynced operations are allowed to be lost.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8960
Test Plan: injected crashed at various points in `FileExpectedStateManager` and verified the next run recovers the state/trace file with highest seqno and removes all older/temporary files. Note we don't use sync_fault_injection in CI crash tests yet.
Reviewed By: pdillinger
Differential Revision: D31194941
Pulled By: ajkr
fbshipit-source-id: b0f935a529a0186c5a9c7709fcaa8829de8a84cf
Summary:
In the past, we unnecessarily requires all keys in the same write batch
to be from column families whose timestamps' formats are the same for
simplicity. Specifically, we cannot use the same write batch to write to
two column families, one of which enables timestamp while the other
disables it.
The limitation is due to the member `timestamp_size_` that used to exist
in each `WriteBatch` object. We pass a timestamp_size to the constructor
of `WriteBatch`. Therefore, users can simply use the old
`WriteBatch::Put()`, `WriteBatch::Delete()`, etc APIs for write, while
the internal implementation of `WriteBatch` will take care of memory
allocation for timestamps.
The above is not necessary.
One the one hand, users can set up a memory buffer to store user key and
then contiguously append the timestamp to the user key. Then the user
can pass this buffer to the `WriteBatch::Put(Slice&)` API.
On the other hand, users can set up a SliceParts object which is an
array of Slices and let the last Slice to point to the memory buffer
storing timestamp. Then the user can pass the SliceParts object to the
`WriteBatch::Put(SliceParts&)` API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8725
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D30654499
Pulled By: riversand963
fbshipit-source-id: 9d848c77ad3c9dd629aa5fc4e2bc16fb0687b4a2
Summary:
This PR adds the foundation classes for key-value integrity protection and the first use case: protecting live updates from the source buffers added to `WriteBatch` through the destination buffer in `MemTable`. The width of the protection info is not yet configurable -- only eight bytes per key is supported. This PR allows users to enable protection by constructing `WriteBatch` with `protection_bytes_per_key == 8`. It does not yet expose a way for users to get integrity protection via other write APIs (e.g., `Put()`, `Merge()`, `Delete()`, etc.).
The foundation classes (`ProtectionInfo.*`) embed the coverage info in their type, and provide `Protect.*()` and `Strip.*()` functions to navigate between types with different coverage. For making bytes per key configurable (for powers of two up to eight) in the future, these classes are templated on the unsigned integer type used to store the protection info. That integer contains the XOR'd result of hashes with independent seeds for all covered fields. For integer fields, the hash is computed on the raw unadjusted bytes, so the result is endian-dependent. The most significant bytes are truncated when the hash value (8 bytes) is wider than the protection integer.
When `WriteBatch` is constructed with `protection_bytes_per_key == 8`, we hold a `ProtectionInfoKVOTC` (i.e., one that covers key, value, optype aka `ValueType`, timestamp, and CF ID) for each entry added to the batch. The protection info is generated from the original buffers passed by the user, as well as the original metadata generated internally. When writing to memtable, each entry is transformed to a `ProtectionInfoKVOTS` (i.e., dropping coverage of CF ID and adding coverage of sequence number), since at that point we know the sequence number, and have already selected a memtable corresponding to a particular CF. This protection info is verified once the entry is encoded in the `MemTable` buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7748
Test Plan:
- an integration test to verify a wide variety of single-byte changes to the encoded `MemTable` buffer are caught
- add to stress/crash test to verify it works in variety of configs/operations without intentional corruption
- [deferred] unit tests for `ProtectionInfo.*` classes for edge cases like KV swap, `SliceParts` and `Slice` APIs are interchangeable, etc.
Reviewed By: pdillinger
Differential Revision: D25754492
Pulled By: ajkr
fbshipit-source-id: e481bac6c03c2ab268be41359730f1ceb9964866
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
Stress tests count number of errors and report them at the end. Not all the cases are accompanied with a log line which makes debugging difficult. The patch adds a log line to the remaining cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6256
Differential Revision: D19268785
Pulled By: maysamyabandeh
fbshipit-source-id: bdabcaa5c5c7edcb4ce4f25e38fd8a3fd9c7700b
Summary:
Two changes:
1. Prevent static variables in a header file
2. Add "override" keyword when virtual functions are overridden.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6137
Test Plan: Build db_stress with or without LITE.
Differential Revision: D18892007
fbshipit-source-id: 295356427a34473b23ed36d6ed4ef3ae35a32db0
Summary:
db_stress_tool.cc now is a giant file. In order to main it easier to improve and maintain, break it down to multiple source files.
Most classes are turned into their own files. Separate .h and .cc files are created for gflag definiations. Another .h and .cc files are created for some common functions. Some test execution logic that is only loosely related to class StressTest is moved to db_stress_driver.h and db_stress_driver.cc. All the files are located under db_stress_tool/. The directory name is created as such because if we end it with either stress or test, .gitignore will ignore any file under it and makes it prone to issues in developements.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6134
Test Plan: Build under GCC7 with and without LITE on using GNU Make. Build with GCC 4.8. Build with cmake with -DWITH_TOOL=1
Differential Revision: D18876064
fbshipit-source-id: b25d0a7451840f31ac0f5ebb0068785f783fdf7d
Levi Tamasi