Summary: This diff leverage the existing block cache and extend it to cache index/filter block.
Test Plan:
Added new tests in db_test and table_test
The correctness is checked by:
1. make check
2. make valgrind_check
Performance is test by:
1. 10 times of build_tools/regression_build_test.sh on two versions of rocksdb before/after the code change. Test results suggests no significant difference between them. For the two key operatons `overwrite` and `readrandom`, the average iops are both 20k and ~260k, with very small variance).
2. db_stress.
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb, haobo, xjin
Differential Revision: https://reviews.facebook.net/D13167
Summary:
Rocksdb can now support a uncompressed block cache, or a compressed
block cache or both. Lookups first look for a block in the
uncompressed cache, if it is not found only then it is looked up
in the compressed cache. If it is found in the compressed cache,
then it is uncompressed and inserted into the uncompressed cache.
It is possible that the same block resides in the compressed cache
as well as the uncompressed cache at the same time. Both caches
have their own individual LRU policy.
Test Plan: Unit test case attached.
Reviewers: kailiu, sdong, haobo, leveldb
Reviewed By: haobo
CC: xjin, haobo
Differential Revision: https://reviews.facebook.net/D12675
Summary: Converted db_stress, db_repl_stress and db_bench to use gflags
Test Plan: I tested by printing out all the flags from old and new versions. Tried defaults, + various combinations with "interesting flags". Also, tested by running db_crashtest.py and db_crashtest2.py.
Reviewers: emayanke, dhruba, haobo, kailiu, sdong
Reviewed By: emayanke
CC: leveldb, xjin
Differential Revision: https://reviews.facebook.net/D13581
Summary:
Change namespace from leveldb to rocksdb. This allows a single
application to link in open-source leveldb code as well as
rocksdb code into the same process.
Test Plan: compile rocksdb
Reviewers: emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13287
Summary: Will use iterators to verify keys in the db for half of its keys and Gets for the other half.
Test Plan: ./db_stress --max_key=1000 --ops_per_thread=100
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13227
Summary: Using an iterator instead of the Get method, each thread goes through a portion of the database and verifies values by comparing to the shared state.
Test Plan:
./db_stress --db=/tmp/tmppp --max_key=10000 --ops_per_thread=10000
To test some basic cases, the following lines can be added (each set in turn) to the verifyDb method with the following expected results:
// Should abort with "Unexpected value found"
shared.Delete(start);
// Should abort with "Value not found"
WriteOptions write_opts;
db_->Delete(write_opts, Key(start));
// Should succeed
WriteOptions write_opts;
shared.Delete(start);
db_->Delete(write_opts, Key(start));
// Should abort with "Value not found"
WriteOptions write_opts;
db_->Delete(write_opts, Key(start + (end-start)/2));
// Should abort with "Value not found"
db_->Delete(write_opts, Key(end-1));
// Should abort with "Unexpected value"
shared.Delete(end-1);
// Should abort with "Unexpected value"
shared.Delete(start + (end-start)/2);
// Should abort with "Value not found"
db_->Delete(write_opts, Key(start));
shared.Delete(start);
db_->Delete(write_opts, Key(end-1));
db_->Delete(write_opts, Key(end-2));
To test the out of range abort, change the key in the for loop to Key(i+1), so that the key defined by the index i is now outside of the supposed range of the database.
Reviewers: emayanke
Reviewed By: emayanke
CC: dhruba, xjin
Differential Revision: https://reviews.facebook.net/D13071
Summary:
Added MultiIterate() which does a seek and some Next/Prev
calls. Iterator status is checked only, no data integrity check
Test Plan:
make db_stress
./db_stress --iterpercent=<nonzero value> --readpercent=, etc.
Reviewers: emayanke, dhruba, xjin
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12915
Summary:
Added a new field called max_size_amplification_ratio in the
CompactionOptionsUniversal structure. This determines the maximum
percentage overhead of space amplification.
The size amplification is defined to be the ratio between the size of
the oldest file to the sum of the sizes of all other files. If the
size amplification exceeds the specified value, then min_merge_width
and max_merge_width are ignored and a full compaction of all files is done.
A value of 10 means that the size a database that stores 100 bytes
of user data could occupy 110 bytes of physical storage.
Test Plan: Unit test DBTest.UniversalCompactionSpaceAmplification added.
Reviewers: haobo, emayanke, xjin
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12825
Summary: Replace include/leveldb with include/rocksdb.
Test Plan:
make clean; make check
make clean; make release
Differential Revision: https://reviews.facebook.net/D12489
Summary:
This patch adds three new MemTableRep's: UnsortedRep, PrefixHashRep, and VectorRep.
UnsortedRep stores keys in an std::unordered_map of std::sets. When an iterator is requested, it dumps the keys into an std::set and iterates over that.
VectorRep stores keys in an std::vector. When an iterator is requested, it creates a copy of the vector and sorts it using std::sort. The iterator accesses that new vector.
PrefixHashRep stores keys in an unordered_map mapping prefixes to ordered sets.
I also added one API change. I added a function MemTableRep::MarkImmutable. This function is called when the rep is added to the immutable list. It doesn't do anything yet, but it seems like that could be useful. In particular, for the vectorrep, it means we could elide the extra copy and just sort in place. The only reason I haven't done that yet is because the use of the ArenaAllocator complicates things (I can elaborate on this if needed).
Test Plan:
make -j32 check
./db_stress --memtablerep=vector
./db_stress --memtablerep=unsorted
./db_stress --memtablerep=prefixhash --prefix_size=10
Reviewers: dhruba, haobo, emayanke
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12117
Test Plan:
- make all check;
- make release;
- make stringappend_test; ./stringappend_test
Reviewers: haobo, emayanke
Reviewed By: haobo
CC: leveldb, kailiu
Differential Revision: https://reviews.facebook.net/D12381
Summary:
Updated db_bench and utilities/merge_operators.h to allow for dynamic benchmarking
of merge operators in db_bench. Added a new test (--benchmarks=mergerandom), which performs
a bunch of random Merge() operations over random keys. Also added a "--merge_operator=" flag
so that the tester can easily benchmark different merge operators. Currently supports
the PutOperator and UInt64Add operator. Support for stringappend or list append may come later.
Test Plan:
1. make db_bench
2. Test the PutOperator (simulating Put) as follows:
./db_bench --benchmarks=fillrandom,readrandom,updaterandom,readrandom,mergerandom,readrandom --merge_operator=put
--threads=2
3. Test the UInt64AddOperator (simulating numeric addition) similarly:
./db_bench --value_size=8 --benchmarks=fillrandom,readrandom,updaterandom,readrandom,mergerandom,readrandom
--merge_operator=uint64add --threads=2
Reviewers: haobo, dhruba, zshao, MarkCallaghan
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11535
Summary:
Minor fix to current codes, including: coding style, output format,
comments. No major logic change. There are only 2 real changes, please see my inline comments.
Test Plan: make all check
Reviewers: haobo, dhruba, emayanke
Differential Revision: https://reviews.facebook.net/D12297
Summary: rocksdb replicaiton will need this when writing value+TS from master to slave 'as is'
Test Plan: make
Reviewers: dhruba, vamsi, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11919
Summary: Removed KeyMayExistImpl because KeyMayExist demanded Get like semantics now. Removed no_io from memtable and imm because we need the proper value now and shouldn't just stop when we see Merge in memtable. Added checks to block_cache. Updated documentation and unit-test
Test Plan: make all check;db_stress for 1 hour
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11853
Summary:
Introduced KeyMayExist checking during writebatch-delete and removed from Outer Delete API because it uses writebatch-delete.
Added code to skip getting Table from disk if not already present in table_cache.
Some renaming of variables.
Introduced KeyMayExistImpl which allows checking since specified sequence number in GetImpl useful to check partially written writebatch.
Changed KeyMayExist to not be pure virtual and provided a default implementation.
Expanded unit-tests in db_test to check appropriately.
Ran db_stress for 1 hour with ./db_stress --max_key=100000 --ops_per_thread=10000000 --delpercent=50 --filter_deletes=1 --statistics=1.
Test Plan: db_stress;make check
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb, xjin
Differential Revision: https://reviews.facebook.net/D11745
Summary:
Wrote a new function in db_impl.c-CheckKeyMayExist that calls Get but with a new parameter turned on which makes Get return false only if bloom filters can guarantee that key is not in database. Delete calls this function and if the option- deletes_use_filter is turned on and CheckKeyMayExist returns false, the delete will be dropped saving:
1. Put of delete type
2. Space in the db,and
3. Compaction time
Test Plan:
make all check;
will run db_stress and db_bench and enhance unit-test once the basic design gets approved
Reviewers: dhruba, haobo, vamsi
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11607
Summary: db_stress should alos print complete statistics like db_bench. Needed this when I wanted to measure number of delete-IOs dropped due to CheckKeyMayExist to be introduced to rocksdb codebase later- to make deltes in rocksdb faster
Test Plan: make db_stress;./db_stress --max_key=100 --ops_per_thread=1000 --statistics=1
Reviewers: sheki, dhruba, vamsi, haobo
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D11655
Summary:
There is a new option called hybrid_mode which, when switched on,
causes HBase style compactions. Files from L0 are
compacted back into L0. This meat of this compaction algorithm
is in PickCompactionHybrid().
All files reside in L0. That means all files have overlapping
keys. Each file has a time-bound, i.e. each file contains a
range of keys that were inserted around the same time. The
start-seqno and the end-seqno refers to the timeframe when
these keys were inserted. Files that have contiguous seqno
are compacted together into a larger file. All files are
ordered from most recent to the oldest.
The current compaction algorithm starts to look for
candidate files starting from the most recent file. It continues to
add more files to the same compaction run as long as the
sum of the files chosen till now is smaller than the next
candidate file size. This logic needs to be debated
and validated.
The above logic should reduce write amplification to a
large extent... will publish numbers shortly.
Test Plan: dbstress runs for 6 hours with no data corruption (tested so far).
Differential Revision: https://reviews.facebook.net/D11289
Summary:
There is a new option called hybrid_mode which, when switched on,
causes HBase style compactions. Files from L0 are
compacted back into L0. This meat of this compaction algorithm
is in PickCompactionHybrid().
All files reside in L0. That means all files have overlapping
keys. Each file has a time-bound, i.e. each file contains a
range of keys that were inserted around the same time. The
start-seqno and the end-seqno refers to the timeframe when
these keys were inserted. Files that have contiguous seqno
are compacted together into a larger file. All files are
ordered from most recent to the oldest.
The current compaction algorithm starts to look for
candidate files starting from the most recent file. It continues to
add more files to the same compaction run as long as the
sum of the files chosen till now is smaller than the next
candidate file size. This logic needs to be debated
and validated.
The above logic should reduce write amplification to a
large extent... will publish numbers shortly.
Test Plan: dbstress runs for 6 hours with no data corruption (tested so far).
Differential Revision: https://reviews.facebook.net/D11289
Summary: as title, also removed an incorrect assertion
Test Plan: make check; db_stress --mmap_read=1; db_stress --mmap_read=0
Reviewers: dhruba, emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11367
Summary:
Rocksdb allos specifying the number of files in L0 that triggers
compactions. Expose this api as a command line parameter for
running db_stress.
Test Plan: Run test
Reviewers: sheki, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11343
Summary:
This diff simplifies EnvOptions by treating it as POD, similar to Options.
- virtual functions are removed and member fields are accessed directly.
- StorageOptions is removed.
- Options.allow_readahead and Options.allow_readahead_compactions are deprecated.
- Unused global variables are removed: useOsBuffer, useFsReadAhead, useMmapRead, useMmapWrite
Test Plan: make check; db_stress
Reviewers: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11175
Summary: Make Statistics usable by client
Test Plan: make check; db_bench
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D10899
Summary:
This is initial version. A few ways in which this could
be extended in the future are:
(a) Killing from more places in source code
(b) Hashing stack and using that hash in determining whether to crash.
This is to avoid crashing more often at source lines that are executed
more often.
(c) Raising exceptions or returning errors instead of killing
Test Plan:
This whole thing is for testing.
Here is part of output:
python2.7 tools/db_crashtest2.py -d 600
Running db_stress
db_stress retncode -15 output LevelDB version : 1.5
Number of threads : 32
Ops per thread : 10000000
Read percentage : 50
Write-buffer-size : 4194304
Delete percentage : 30
Max key : 1000
Ratio #ops/#keys : 320000
Num times DB reopens: 0
Batches/snapshots : 1
Purge redundant % : 50
Num keys per lock : 4
Compression : snappy
------------------------------------------------
No lock creation because test_batches_snapshots set
2013/04/26-17:55:17 Starting database operations
Created bg thread 0x7fc1f07ff700
... finished 60000 ops
Running db_stress
db_stress retncode -15 output LevelDB version : 1.5
Number of threads : 32
Ops per thread : 10000000
Read percentage : 50
Write-buffer-size : 4194304
Delete percentage : 30
Max key : 1000
Ratio #ops/#keys : 320000
Num times DB reopens: 0
Batches/snapshots : 1
Purge redundant % : 50
Num keys per lock : 4
Compression : snappy
------------------------------------------------
Created bg thread 0x7ff0137ff700
No lock creation because test_batches_snapshots set
2013/04/26-17:56:15 Starting database operations
... finished 90000 ops
Revert Plan: OK
Task ID: #2252691
Reviewers: dhruba, emayanke
Reviewed By: emayanke
CC: leveldb, haobo
Differential Revision: https://reviews.facebook.net/D10581
Summary: db can't reopen safely with disable_wal set!
Test Plan: make db_stress; run db_stress with disable_wal and reopens set and see error
Reviewers: dhruba, vamsi
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10857
Summary: Will help while debugging if the generated value is truncated at proper length.
Test Plan: make db_stress;/db_stress --max_key=10000 --db=/tmp/mcr --threads=1 --ops_per_thread=10000
Reviewers: dhruba, vamsi
Reviewed By: vamsi
Differential Revision: https://reviews.facebook.net/D10845
Summary:
When opened with DBTimestamp::Open call, timestamps are prepended to and stripped from the value during subsequent Put and Get calls respectively. The Timestamp is used to discard values in Get and custom compaction filter which have exceeded their TTL which is specified during Open.
Have made a temporary change to Makefile to let us test with the temporary file TestTime.cc. Have also changed the private members of db_impl.h to protected to let them be inherited by the new class DBTimestamp
Test Plan: make db_timestamp; TestTime.cc(will not check it in) shows how to use the apis currently, but I will write unit-tests shortly
Reviewers: dhruba, vamsi, haobo, sheki, heyongqiang, vkrest
Reviewed By: vamsi
CC: zshao, xjin, vkrest, MarkCallaghan
Differential Revision: https://reviews.facebook.net/D10311
Summary: The crash_test depends on db_stress to work with pre-existing dir
Test Plan: make db_stress; Run db_stress with 'destroy_db_initially=0'
Reviewers: vamsi, dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10041
Summary: For sanity w.r.t. the way we split up the reopens equally among the ops/thread
Test Plan: make db_stress; db_stress --ops_per_thread=10 --reopens=10 => error
Reviewers: vamsi, dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10023
Summary: The script runs and kills the stress test periodically. Default values have been used in the script now. Should I make this a part of the Makefile or automated rocksdb build? The values can be easily changed in the script right now, but should I add some support for variable values or input to the script? I believe the script achieves its objective of unsafe crashes and reopening to expect sanity in the database.
Test Plan: python tools/db_crashtest.py
Reviewers: dhruba, vamsi, MarkCallaghan
Reviewed By: vamsi
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9369
Summary:
Earlier Statistics object was a raw pointer. This meant the user had to clear up
the Statistics object after creating the database. In most use cases the database is created in a function and the statistics pointer is out of scope. Hence the statistics object would never be deleted.
Now Using a shared_ptr to manage this.
Want this in before the next release.
Test Plan: make all check.
Reviewers: dhruba, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9735
Summary:
Also added some comments and fixed some bugs in
stats reporting. Now the stats seem to match what is expected.
Test Plan:
[nponnekanti@dev902 /data/users/nponnekanti/rocksdb] ./db_stress --test_batches_snapshots=1 --ops_per_thread=1000 --threads=1 --max_key=320
LevelDB version : 1.5
Number of threads : 1
Ops per thread : 1000
Read percentage : 10
Delete percentage : 30
Max key : 320
Ratio #ops/#keys : 3
Num times DB reopens: 10
Batches/snapshots : 1
Num keys per lock : 4
Compression : snappy
------------------------------------------------
No lock creation because test_batches_snapshots set
2013/03/04-15:58:56 Starting database operations
2013/03/04-15:58:56 Reopening database for the 1th time
2013/03/04-15:58:56 Reopening database for the 2th time
2013/03/04-15:58:56 Reopening database for the 3th time
2013/03/04-15:58:56 Reopening database for the 4th time
Created bg thread 0x7f4542bff700
2013/03/04-15:58:56 Reopening database for the 5th time
2013/03/04-15:58:56 Reopening database for the 6th time
2013/03/04-15:58:56 Reopening database for the 7th time
2013/03/04-15:58:57 Reopening database for the 8th time
2013/03/04-15:58:57 Reopening database for the 9th time
2013/03/04-15:58:57 Reopening database for the 10th time
2013/03/04-15:58:57 Reopening database for the 11th time
2013/03/04-15:58:57 Limited verification already done during gets
Stress Test : 1811.551 micros/op 552 ops/sec
: Wrote 0.10 MB (0.05 MB/sec) (598% of 1011 ops)
: Wrote 6050 times
: Deleted 3050 times
: 500/900 gets found the key
: Got errors 0 times
[nponnekanti@dev902 /data/users/nponnekanti/rocksdb] ./db_stress --ops_per_thread=1000 --threads=1 --max_key=320
LevelDB version : 1.5
Number of threads : 1
Ops per thread : 1000
Read percentage : 10
Delete percentage : 30
Max key : 320
Ratio #ops/#keys : 3
Num times DB reopens: 10
Batches/snapshots : 0
Num keys per lock : 4
Compression : snappy
------------------------------------------------
Creating 80 locks
2013/03/04-15:58:17 Starting database operations
2013/03/04-15:58:17 Reopening database for the 1th time
2013/03/04-15:58:17 Reopening database for the 2th time
2013/03/04-15:58:17 Reopening database for the 3th time
2013/03/04-15:58:17 Reopening database for the 4th time
Created bg thread 0x7fc0f5bff700
2013/03/04-15:58:17 Reopening database for the 5th time
2013/03/04-15:58:17 Reopening database for the 6th time
2013/03/04-15:58:18 Reopening database for the 7th time
2013/03/04-15:58:18 Reopening database for the 8th time
2013/03/04-15:58:18 Reopening database for the 9th time
2013/03/04-15:58:18 Reopening database for the 10th time
2013/03/04-15:58:18 Reopening database for the 11th time
2013/03/04-15:58:18 Starting verification
Stress Test : 1836.258 micros/op 544 ops/sec
: Wrote 0.01 MB (0.01 MB/sec) (59% of 1011 ops)
: Wrote 605 times
: Deleted 305 times
: 50/90 gets found the key
: Got errors 0 times
2013/03/04-15:58:18 Verification successful
Revert Plan: OK
Task ID: #
Reviewers: emayanke, dhruba
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9081
Summary: In light of the new option introduced by commit 806e264350 where the database has an option to compact before flushing to disk, we want the stress test to test both sides of the option. Have made it to 'deterministically' and configurably change that option for reopens.
Test Plan: make db_stress; ./db_stress with some differnet options
Reviewers: dhruba, vamsi
Reviewed By: dhruba
CC: leveldb, sheki
Differential Revision: https://reviews.facebook.net/D9165
Summary:
Use only the counter mechanism. Do away with
incNumFileOpens, incNumFileClose, incNumFileErrors
s/NULL/nullptr/g in db/table_cache.cc
Test Plan: make clean check
Reviewers: dhruba, heyongqiang, emayanke
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8841
Summary:
Currently the test tracks all writes in memory and
uses it for verification at the end. This has 4 problems:
(a) It needs mutex for each write to ensure in-memory update
and leveldb update are done atomically. This slows down the
benchmark.
(b) Verification phase at the end is time consuming as well
(c) Does not test batch writes or snapshots
(d) We cannot kill the test and restart multiple times in a
loop because in-memory state will be lost.
I am adding a FLAGS_multi that does MultiGet/MultiPut/MultiDelete
instead of get/put/delete to get/put/delete a group of related
keys with same values atomically. Every get retrieves the group
of keys and checks that their values are same. This does not have
the above problems but the downside is that it does less amount
of validation than the other approach.
Test Plan:
This whole this is a test! Here is a small run. I am doing larger run now.
[nponnekanti@dev902 /data/users/nponnekanti/rocksdb] ./db_stress --ops_per_thread=10000 --multi=1 --ops_per_key=25
LevelDB version : 1.5
Number of threads : 32
Ops per thread : 10000
Read percentage : 10
Delete percentage : 30
Max key : 2147483648
Num times DB reopens: 10
Num keys per lock : 4
Compression : snappy
------------------------------------------------
Creating 536870912 locks
2013/02/20-16:59:32 Starting database operations
Created bg thread 0x7f9ebcfff700
2013/02/20-16:59:37 Reopening database for the 1th time
2013/02/20-16:59:46 Reopening database for the 2th time
2013/02/20-16:59:57 Reopening database for the 3th time
2013/02/20-17:00:11 Reopening database for the 4th time
2013/02/20-17:00:25 Reopening database for the 5th time
2013/02/20-17:00:36 Reopening database for the 6th time
2013/02/20-17:00:47 Reopening database for the 7th time
2013/02/20-17:00:59 Reopening database for the 8th time
2013/02/20-17:01:10 Reopening database for the 9th time
2013/02/20-17:01:20 Reopening database for the 10th time
2013/02/20-17:01:31 Reopening database for the 11th time
2013/02/20-17:01:31 Starting verification
Stress Test : 109.125 micros/op 22191 ops/sec
: Wrote 0.00 MB (0.23 MB/sec) (59% of 32 ops)
: Deleted 10 times
2013/02/20-17:01:31 Verification successful
Revert Plan: OK
Task ID: #
Reviewers: dhruba, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8733
Summary:
Fixed a bug in the stress-test where the correct size was not being
passed to GenerateValue. This bug was there since the beginning but assertions
were switched on in our code-base only recently.
Added comments on the top detailing how the stress test works and how to
quicken/slow it down after investigation.
Test Plan: make all check. ./db_stress
Reviewers: dhruba, asad
Reviewed By: dhruba
CC: vamsi, sheki, heyongqiang, zshao
Differential Revision: https://reviews.facebook.net/D8727
Summary:
* Introduce is histogram in statistics.h
* stop watch to measure time.
* introduce two timers as a poc.
Replaced NULL with nullptr to fight some lint errors
Should be useful for google.
Test Plan:
ran db_bench and check stats.
make all check
Reviewers: dhruba, heyongqiang
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8637
Summary:
Replace manual memory management with std::unique_ptr in a
number of places; not exhaustive, but this fixes a few leaks with file
handles as well as clarifies semantics of the ownership of file handles
with log classes.
Test Plan: db_stress, make check
Reviewers: dhruba
Reviewed By: dhruba
CC: zshao, leveldb, heyongqiang
Differential Revision: https://reviews.facebook.net/D8043
Summary:
Found issues with `db_test` and `db_stress` when running valgrind.
`DBImpl` had an issue where if an compaction failed then it will use the uninitialised file size of an output file is used. This manifested as the final call to output to the log in `DoCompactionWork()` branching on uninitialized memory (all the way down in printf's innards).
Test Plan:
Ran `valgrind --track_origins=yes ./db_test` and `valgrind ./db_stress` to see if issues disappeared.
Ran `make check` to see if there were no regressions.
Reviewers: vamsi, dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8001
Summary:
Check in LogAndApply if the file size is more than the limit set in
Options.
Things to consider : will this be expensive?
Test Plan: make all check. Inputs on a new unit test?
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7701
Summary:
dbstress has an option to reopen the database. Make it such that the
previous handle is not closed before we reopen, this simulates a
situation similar to a process crash.
Added new api to DMImpl to remove the lock file.
Test Plan: run db_stress
Reviewers: emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D6777
Summary:
Create more than one background compaction thread if specified.
This code peice is similar to what exists in db_bench.
Test Plan: make check
Differential Revision: https://reviews.facebook.net/D6753
Summary: FLAGS_reopen (configurable) specifies the number of times the databse is to be reopened. FLAGS_ops_per_thread is divided into points based on that reopen field. At these points all threads come together to wait for the databse to reopen. Each thread "votes" for the database to reopen and when all have voted, the database reopens.
Test Plan: make all;./db_stress
Reviewers: dhruba, MarkCallaghan, sheki, asad, heyongqiang
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D6627
Summary:
disable size compaction in ldb reduce_levels, this will avoid compactions rather than the manual comapction,
added --compression=none|snappy|zlib|bzip2 and --file_size= per-file size to ldb reduce_levels command
Test Plan: run ldb
Reviewers: dhruba, MarkCallaghan
Reviewed By: dhruba
CC: sheki, emayanke
Differential Revision: https://reviews.facebook.net/D6597
Summary: Stress test modified to do deletes and later verify them
Test Plan: running the test: db_stress
Reviewers: dhruba, heyongqiang, asad, sheki, MarkCallaghan
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D6567
Kai Liu