Summary:
Marked the Ribbon filter and optimize_filters_for_memory features
as production-ready, each enabling memory savings for Bloom-like filters.
Use `NewRibbonFilterPolicy` in place of `NewBloomFilterPolicy` to use
Ribbon filters instead of Bloom, or `ribbonfilter` in place of
`bloomfilter` in configuration string.
Some small refactoring in db_stress.
Removed/refactored unused code in db_bench, in part preparing for future
default possibly being different from "disabled."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8408
Test Plan:
Lots of prior automated, ad-hoc, and "real world" testing.
Updated tests for new API names. Quick db_bench test:
bloom fillrandom
77730 ops/sec
rocksdb.block.cache.filter.bytes.insert COUNT : 89929384
ribbon fillrandom
71492 ops/sec
rocksdb.block.cache.filter.bytes.insert COUNT : 64531384
Reviewed By: mrambacher
Differential Revision: D29140805
Pulled By: pdillinger
fbshipit-source-id: d742c922722421678f95ad85eeb0aaebc9f5e49a
Summary:
When injecting in DB open, error can happen in background threads, causing DB open succeed, but DB is soon made read-only and subsequence writes will fail, which is not expected. To prevent it from happening, wait for compaction to finish before serving the traffic. If there is a failure, reopen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8270
Test Plan: Run the test.
Reviewed By: ajkr
Differential Revision: D28230537
fbshipit-source-id: e2e97888904f9b9bb50c35ccf95b88c2319ef5c3
Summary:
Refactor kill point to one single class, rather than several extern variables. The intention was to drop unflushed data before killing to simulate some job, and I tried to a pointer to fault ingestion fs to the killing class, but it ended up with harder than I thought. Perhaps we'll need to do this in another way. But I thought the refactoring itself is good so I send it out.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8241
Test Plan: make release and run crash test for a while.
Reviewed By: anand1976
Differential Revision: D28078486
fbshipit-source-id: f9182c1455f52e6851c13f88a21bade63bcec45f
Summary:
DB Stress to add --open_metadata_write_fault_one_in which would randomly fail in some file metadata modification operations during DB Open, including file creation, close, renaming and directory sync. Some operations can fail before and after the operations take place.
If DB open fails, db_stress would retry without the failure ingestion, and DB is expected to open successfully.
This option is enabled in crash test in half of the time.
Some follow up changes would allow write failures in open time, and ingesting those failures in non-DB open cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8235
Test Plan: Run stress tests for a while and see failures got triggered. This can reproduce the bug fixed by https://github.com/facebook/rocksdb/pull/8192 and a similar one that fails when fsyncing parent directory.
Reviewed By: anand1976
Differential Revision: D28010944
fbshipit-source-id: 36a96da4dc3633e5f7680cef3ea0a900fcdb5558
Summary:
This partially reverts commit 10196d7edc.
The problem with this change is because of important filter use cases:
FIFO compaction and SST writer. FIFO "compaction" always uses level 0 so
would only use Ribbon filters if specifically including level 0 for the
Ribbon filter policy. SST writer sets level_at_creation=-1 to indicate
unknown level, and this would be treated the same as level 0 unless
fixed.
We are keeping the part about committing to permanent schema, which is
only changes to API comments and HISTORY.md.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8212
Test Plan: CI
Reviewed By: jay-zhuang
Differential Revision: D27896468
Pulled By: pdillinger
fbshipit-source-id: 50a775f7cba5d64fb729d9b982e355864020596e
Summary:
Since the Ribbon filter schema seems good (compatible back to
6.15.0), this change commits to long term support of the SST schema,
even though we expect the API for enabling Ribbon to change (still
called NewExperimentalRibbonFilterPolicy).
This also adds support for "hybrid" configuration in which some levels
use Bloom (higher levels, lower numbered) for speed and the rest use
Ribbon (lower levels, higher numbered) for memory space efficiency.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8198
Test Plan: unit test added, crash test support
Reviewed By: jay-zhuang
Differential Revision: D27831232
Pulled By: pdillinger
fbshipit-source-id: 90e528677689474d293ed6710b42ba89fbd5b5ab
Summary:
Enable backup/restore functionality with Integrated BlobDB in
db_stress and crash test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8165
Test Plan:
Ran python3 -u tools/db_crashtest.py --simple whitebox along
with :
1. decreased "backup_in_one" value for backups to be more frequent and
2. manually changed code for "enable_blob_file" to be always true and
apply blobdb params 100% for testing purpose.
Reviewed By: ltamasi
Differential Revision: D27636025
Pulled By: akankshamahajan15
fbshipit-source-id: 0d0e0d1479ced163f992872dc998e79c581bfc99
Summary:
A current limitation of backups is that you don't know the
exact database state of when the backup was taken. With this new
feature, you can at least inspect the backup's DB state without
restoring it by opening it as a read-only DB.
Rather than add something like OpenAsReadOnlyDB to the BackupEngine API,
which would inhibit opening stackable DB implementations read-only
(if/when their APIs support it), we instead provide a DB name and Env
that can be used to open as a read-only DB.
Possible follow-up work:
* Add a version of GetBackupInfo for a single backup.
* Let CreateNewBackup return the BackupID of the newly-created backup.
Implementation details:
Refactored ChrootFileSystem to split off new base class RemapFileSystem,
which allows more general remapping of files. We use this base class to
implement BackupEngineImpl::RemapSharedFileSystem.
To minimize API impact, I decided to just add these fields `name_for_open`
and `env_for_open` to those set by GetBackupInfo when
include_file_details=true. Creating the RemapSharedFileSystem adds a bit
to the memory consumption, perhaps unnecessarily in some cases, but this
has been mitigated by (a) only initialize the RemapSharedFileSystem
lazily when GetBackupInfo with include_file_details=true is called, and
(b) using the existing `shared_ptr<FileInfo>` objects to hold most of the
mapping data.
To enhance API safety, RemapSharedFileSystem is wrapped by new
ReadOnlyFileSystem which rejects any attempts to write. This uncovered a
couple of places in which DB::OpenForReadOnly would write to the
filesystem, so I fixed these. Added a release note because this affects
logging.
Additional minor refactoring in backupable_db.cc to support the new
functionality.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8142
Test Plan:
new test (run with ASAN and UBSAN), added to stress test and
ran it for a while with amplified backup_one_in
Reviewed By: ajkr
Differential Revision: D27535408
Pulled By: pdillinger
fbshipit-source-id: 04666d310aa0261ef6b2385c43ca793ce1dfd148
Summary:
Add some basic test for user-defined timestamp to db_stress. Currently,
read with timestamp always tries to read using the current timestamp.
Due to the per-key timestamp-sequence ordering constraint, we only add timestamp-
related tests to the `NonBatchedOpsStressTest` since this test serializes accesses
to the same key and uses a file to cross-check data correctness.
The timestamp feature is not supported in a number of components, e.g. Merge, SingleDelete,
DeleteRange, CompactionFilter, Readonly instance, secondary instance, SST file ingestion, transaction,
etc. Therefore, db_stress should exit if user enables both timestamp and these features at the same
time. The (currently) incompatible features can be found in
`CheckAndSetOptionsForUserTimestamp`.
This PR also fixes a bug triggered when timestamp is enabled together with
`index_type=kBinarySearchWithFirstKey`. This bug fix will also be in another separate PR
with more unit tests coverage. Fixing it here because I do not want to exclude the index type
from crash test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8061
Test Plan: make crash_test_with_ts
Reviewed By: jay-zhuang
Differential Revision: D27056282
Pulled By: riversand963
fbshipit-source-id: c3e00ad1023fdb9ebbdf9601ec18270c5e2925a9
Summary:
Since our stress/crash tests by default generate values of size 8, 16, or 24,
it does not make much sense to set `min_blob_size` to 256. The patch
updates the set of potential `min_blob_size` values in the crash test
script and in `db_stress` where it might be set dynamically using
`SetOptions`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8085
Test Plan: Ran `make check` and tried the crash test script.
Reviewed By: riversand963
Differential Revision: D27238620
Pulled By: ltamasi
fbshipit-source-id: 4a96f9944b1ed9220d3045c5ab0b34c49009aeee
Summary:
This does not add any new public APIs or published
functionality, but adds the ability to read and use (and in tests,
write) backups with a new meta file schema, based on the old schema
but not forward-compatible (before this change). The new schema enables
some capabilities not in the old:
* Explicit versioning, so that users get clean error messages the next
time we want to break forward compatibility.
* Ignoring unrecognized fields (with warning), so that new non-critical
features can be added without breaking forward compatibility.
* Rejecting future "non-ignorable" fields, so that new features critical
to some use-cases could potentially be added outside of linear schema
versions, with broken forward compatibility.
* Fields at the end of the meta file, such as for checksum of the meta
file's contents (up to that point)
* New optional 'size' field for each file, which is checked when present
* Optionally omitting 'crc32' field, so that we aren't required to have
a crc32c checksum for files to take a backup. (E.g. to support backup
via hard links and to better support file custom checksums.)
Because we do not have a JSON parser and to share code, the new schema
is simply derived from the old schema.
BackupEngine code is updated to allow missing checksums in some places,
and to make that easier, `has_checksum` and `verify_checksum_after_work`
are eliminated. Empty `checksum_hex` indicates checksum is unknown. I'm
not too afraid of regressing on data integrity, because
(a) we have pretty good test coverage of corruption detection in backups, and
(b) we are increasingly relying on the DB itself for data integrity rather than
it being an exclusive feature of backups.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8069
Test Plan:
new unit tests, added to crash test (some local run with
boosted backup probability)
Reviewed By: ajkr
Differential Revision: D27139824
Pulled By: pdillinger
fbshipit-source-id: 9e0e4decfb42bb84783d64d2d246456d97e8e8c5
Summary:
For performance purposes, the lower level routines were changed to use a SystemClock* instead of a std::shared_ptr<SystemClock>. The shared ptr has some performance degradation on certain hardware classes.
For most of the system, there is no risk of the pointer being deleted/invalid because the shared_ptr will be stored elsewhere. For example, the ImmutableDBOptions stores the Env which has a std::shared_ptr<SystemClock> in it. The SystemClock* within the ImmutableDBOptions is essentially a "short cut" to gain access to this constant resource.
There were a few classes (PeriodicWorkScheduler?) where the "short cut" property did not hold. In those cases, the shared pointer was preserved.
Using db_bench readrandom perf_level=3 on my EC2 box, this change performed as well or better than 6.17:
6.17: readrandom : 28.046 micros/op 854902 ops/sec; 61.3 MB/s (355999 of 355999 found)
6.18: readrandom : 32.615 micros/op 735306 ops/sec; 52.7 MB/s (290999 of 290999 found)
PR: readrandom : 27.500 micros/op 871909 ops/sec; 62.5 MB/s (367999 of 367999 found)
(Note that the times for 6.18 are prior to revert of the SystemClock).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8033
Reviewed By: pdillinger
Differential Revision: D27014563
Pulled By: mrambacher
fbshipit-source-id: ad0459eba03182e454391b5926bf5cdd45657b67
Summary:
New comment for share_files_with_checksum:
// Only used if share_table_files is set to true. Setting to false is
// DEPRECATED and potentially dangerous because in that case BackupEngine
// can lose data if backing up databases with distinct or divergent
// history, for example if restoring from a backup other than the latest,
// writing to the DB, and creating another backup. Setting to true (default)
// prevents these issues by ensuring that different table files (SSTs) with
// the same number are treated as distinct. See
// share_files_with_checksum_naming and ShareFilesNaming.
I have also removed interim option kFlagMatchInterimNaming, which is no
longer needed and was never needed for correct+compatible operation
(just performance).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8020
Test Plan:
tests updated. Backward+forward compatibility verified with
SHORT_TEST=1 check_format_compatible.sh. ldb uses default backup
options, and I manually verified shared_checksum in
/tmp/rocksdb_format_compatible_peterd/bak/current/ after run.
Reviewed By: ajkr
Differential Revision: D26786331
Pulled By: pdillinger
fbshipit-source-id: 36f968dfef1f5cacbd65154abe1d846151a55130
Summary:
For dictionary compression, we need to collect some representative samples of the data to be compressed, which we use to either generate or train (when `CompressionOptions::zstd_max_train_bytes > 0`) a dictionary. Previously, the strategy was to buffer all the data blocks during flush, and up to the target file size during compaction. That strategy allowed us to randomly pick samples from as wide a range as possible that'd be guaranteed to land in a single output file.
However, some users try to make huge files in memory-constrained environments, where this strategy can cause OOM. This PR introduces an option, `CompressionOptions::max_dict_buffer_bytes`, that limits how much data blocks are buffered before we switch to unbuffered mode (which means creating the per-SST dictionary, writing out the buffered data, and compressing/writing new blocks as soon as they are built). It is not strict as we currently buffer more than just data blocks -- also keys are buffered. But it does make a step towards giving users predictable memory usage.
Related changes include:
- Changed sampling for dictionary compression to select unique data blocks when there is limited availability of data blocks
- Made use of `BlockBuilder::SwapAndReset()` to save an allocation+memcpy when buffering data blocks for building a dictionary
- Changed `ParseBoolean()` to accept an input containing characters after the boolean. This is necessary since, with this PR, a value for `CompressionOptions::enabled` is no longer necessarily the final component in the `CompressionOptions` string.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7970
Test Plan:
- updated `CompressionOptions` unit tests to verify limit is respected (to the extent expected in the current implementation) in various scenarios of flush/compaction to bottommost/non-bottommost level
- looked at jemalloc heap profiles right before and after switching to unbuffered mode during flush/compaction. Verified memory usage in buffering is proportional to the limit set.
Reviewed By: pdillinger
Differential Revision: D26467994
Pulled By: ajkr
fbshipit-source-id: 3da4ef9fba59974e4ef40e40c01611002c861465
Summary:
The patch adds checkpoint support to BlobDB. Blob files are hard linked or
copied, depending on whether the checkpoint directory is on the same filesystem
or not, similarly to table files.
TODO: Add support for blob files to `ExportColumnFamily` and to the checksum
verification logic used by backup/restore.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7959
Test Plan: Ran `make check` and the crash test for a while.
Reviewed By: riversand963
Differential Revision: D26434768
Pulled By: ltamasi
fbshipit-source-id: 994be55a8dc08133028250760fca440d2c7c4dc5
Summary:
The patch adds support for the options related to the new BlobDB implementation
to `db_stress`, including support for dynamically adjusting them using `SetOptions`
when `set_options_one_in` and a new flag `allow_setting_blob_options_dynamically`
are specified. (The latter is used to prevent the options from being enabled when
incompatible features are in use.)
The patch also updates the `db_stress` help messages of the existing stacked BlobDB
related options to clarify that they pertain to the old implementation. In addition, it
adds the new BlobDB to the crash test script. In order to prevent a combinatorial explosion
of jobs and still perform whitebox/blackbox testing (including under ASAN/TSAN/UBSAN),
and to also test BlobDB in conjunction with atomic flush and transactions, the script sets
the BlobDB options in 10% of normal/`cf_consistency`/`txn` crash test runs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7900
Test Plan: Ran `make check` and `db_stress`/`db_crashtest.py` with various options.
Reviewed By: jay-zhuang
Differential Revision: D26094913
Pulled By: ltamasi
fbshipit-source-id: c2ef3391a05e43a9687f24e297df05f4a5584814
Summary:
We recently encounter two cases of txn lock timeout in stress test. It might be caused due to latencies of resource scheduling in the internal infrastructure. Hopefully increasing the timeout can make the related tests less flaky.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7823
Test Plan: watch internal stress test to pass.
Reviewed By: siying
Differential Revision: D25739233
Pulled By: cheng-chang
fbshipit-source-id: 84a5a8ae820db24dacd0cfc05928b26505fab89d
Summary:
fix memory leak in db_stress checkpoint test. If s is not ok, checkpoint is not deleted, may cause memory leak.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7813
Test Plan: make asan_check
Reviewed By: cheng-chang
Differential Revision: D25702999
Pulled By: zhichao-cao
fbshipit-source-id: 08253b0852835acb8cfd412503cdabf720afb678
Summary:
Inject the random write error to stress test, it requires set reopen=0 and disable_wal=true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7653
Test Plan: pass db_stress and python3 db_crashtest.py blackbox
Reviewed By: ajkr
Differential Revision: D25354132
Pulled By: zhichao-cao
fbshipit-source-id: 44721104eecb416e27f65f854912c40e301dd669
Summary:
Added experimental public API for Ribbon filter:
NewExperimentalRibbonFilterPolicy(). This experimental API will
take a "Bloom equivalent" bits per key, and configure the Ribbon
filter for the same FP rate as Bloom would have but ~30% space
savings. (Note: optimize_filters_for_memory is not yet implemented
for Ribbon filter. That can be added with no effect on schema.)
Internally, the Ribbon filter is configured using a "one_in_fp_rate"
value, which is 1 over desired FP rate. For example, use 100 for 1%
FP rate. I'm expecting this will be used in the future for configuring
Bloom-like filters, as I expect people to more commonly hold constant
the filter accuracy and change the space vs. time trade-off, rather than
hold constant the space (per key) and change the accuracy vs. time
trade-off, though we might make that available.
### Benchmarking
```
$ ./filter_bench -impl=2 -quick -m_keys_total_max=200 -average_keys_per_filter=100000 -net_includes_hashing
Building...
Build avg ns/key: 34.1341
Number of filters: 1993
Total size (MB): 238.488
Reported total allocated memory (MB): 262.875
Reported internal fragmentation: 10.2255%
Bits/key stored: 10.0029
----------------------------
Mixed inside/outside queries...
Single filter net ns/op: 18.7508
Random filter net ns/op: 258.246
Average FP rate %: 0.968672
----------------------------
Done. (For more info, run with -legend or -help.)
$ ./filter_bench -impl=3 -quick -m_keys_total_max=200 -average_keys_per_filter=100000 -net_includes_hashing
Building...
Build avg ns/key: 130.851
Number of filters: 1993
Total size (MB): 168.166
Reported total allocated memory (MB): 183.211
Reported internal fragmentation: 8.94626%
Bits/key stored: 7.05341
----------------------------
Mixed inside/outside queries...
Single filter net ns/op: 58.4523
Random filter net ns/op: 363.717
Average FP rate %: 0.952978
----------------------------
Done. (For more info, run with -legend or -help.)
```
168.166 / 238.488 = 0.705 -> 29.5% space reduction
130.851 / 34.1341 = 3.83x construction time for this Ribbon filter vs. lastest Bloom filter (could make that as little as about 2.5x for less space reduction)
### Working around a hashing "flaw"
bloom_test discovered a flaw in the simple hashing applied in
StandardHasher when num_starts == 1 (num_slots == 128), showing an
excessively high FP rate. The problem is that when many entries, on the
order of number of hash bits or kCoeffBits, are associated with the same
start location, the correlation between the CoeffRow and ResultRow (for
efficiency) can lead to a solution that is "universal," or nearly so, for
entries mapping to that start location. (Normally, variance in start
location breaks the effective association between CoeffRow and
ResultRow; the same value for CoeffRow is effectively different if start
locations are different.) Without kUseSmash and with num_starts > 1 (thus
num_starts ~= num_slots), this flaw should be completely irrelevant. Even
with 10M slots, the chances of a single slot having just 16 (or more)
entries map to it--not enough to cause an FP problem, which would be local
to that slot if it happened--is 1 in millions. This spreadsheet formula
shows that: =1/(10000000*(1 - POISSON(15, 1, TRUE)))
As kUseSmash==false (the setting for Standard128RibbonBitsBuilder) is
intended for CPU efficiency of filters with many more entries/slots than
kCoeffBits, a very reasonable work-around is to disallow num_starts==1
when !kUseSmash, by making the minimum non-zero number of slots
2*kCoeffBits. This is the work-around I've applied. This also means that
the new Ribbon filter schema (Standard128RibbonBitsBuilder) is not
space-efficient for less than a few hundred entries. Because of this, I
have made it fall back on constructing a Bloom filter, under existing
schema, when that is more space efficient for small filters. (We can
change this in the future if we want.)
TODO: better unit tests for this case in ribbon_test, and probably
update StandardHasher for kUseSmash case so that it can scale nicely to
small filters.
### Other related changes
* Add Ribbon filter to stress/crash test
* Add Ribbon filter to filter_bench as -impl=3
* Add option string support, as in "filter_policy=experimental_ribbon:5.678;"
where 5.678 is the Bloom equivalent bits per key.
* Rename internal mode BloomFilterPolicy::kAuto to kAutoBloom
* Add a general BuiltinFilterBitsBuilder::CalculateNumEntry based on
binary searching CalculateSpace (inefficient), so that subclasses
(especially experimental ones) don't have to provide an efficient
implementation inverting CalculateSpace.
* Minor refactor FastLocalBloomBitsBuilder for new base class
XXH3pFilterBitsBuilder shared with new Standard128RibbonBitsBuilder,
which allows the latter to fall back on Bloom construction in some
extreme cases.
* Mostly updated bloom_test for Ribbon filter, though a test like
FullBloomTest::Schema is a next TODO to ensure schema stability
(in case this becomes production-ready schema as it is).
* Add some APIs to ribbon_impl.h for configuring Ribbon filters.
Although these are reasonably covered by bloom_test, TODO more unit
tests in ribbon_test
* Added a "tool" FindOccupancyForSuccessRate to ribbon_test to get data
for constructing the linear approximations in GetNumSlotsFor95PctSuccess.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7658
Test Plan:
Some unit tests updated but other testing is left TODO. This
is considered experimental but laying down schema compatibility as early
as possible in case it proves production-quality. Also tested in
stress/crash test.
Reviewed By: jay-zhuang
Differential Revision: D24899349
Pulled By: pdillinger
fbshipit-source-id: 9715f3e6371c959d923aea8077c9423c7a9f82b8
Summary:
After replaying the WALs, the memtables are flushed synchronously to L0 instead of being flushed in background. Currently, we only track WAL obsoletion events in the code path of background flush jobs. This PR tracks these events in RecoverLogFiles.
After this change, we can enable `track_and_verify_wal_in_manifest` in `db_stress`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7649
Test Plan: `python tools/db_crashtest.py whitebox`
Reviewed By: riversand963
Differential Revision: D24824501
Pulled By: cheng-chang
fbshipit-source-id: 207129f7b845c50b333680ce6818a68a2fad54b9
Summary:
Consider the following sequence of events:
1. Db flushed an SST with file number N, appended to MANIFEST, and tried to sync the MANIFEST.
2. Syncing MANIFEST failed and db crashed.
3. Db tried to recover with this MANIFEST. In the meantime, no entry about the newly-flushed SST was found in the MANIFEST. Therefore, RocksDB replayed WAL and tried to flush to an SST file reusing the same file number N. This failed because file system does not support overwrite. Then Db deleted this file.
4. Db crashed again.
5. Db tried to recover. When db read the MANIFEST, there was an entry referencing N.sst. This could happen probably because the append in step 1 finally reached the MANIFEST and became visible. Since N.sst had been deleted in step 3, recovery failed.
It is possible that N.sst created in step 1 is valid. Although step 3 would still fail since the MANIFEST was not synced properly in step 1 and 2, deleting N.sst would make it impossible for the db to recover even if the remaining part of MANIFEST was appended and visible after step 5.
After this PR, in step 3, immediately after recovering from MANIFEST, a new MANIFEST is created, then we find that N.sst is not referenced in the MANIFEST, so we delete it, and we'll not reuse N as file number. Then in step 5, since the new MANIFEST does not contain N.sst, the recovery failure situation in step 5 won't happen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7621
Test Plan:
1. some tests are updated, because these tests assume that new MANIFEST is created after WAL recovery.
2. a new unit test is added in db_basic_test to simulate step 3.
Reviewed By: riversand963
Differential Revision: D24668144
Pulled By: cheng-chang
fbshipit-source-id: 90d7487fbad2bc3714f5ede46ea949895b15ae3b
Summary:
When a WAL is synced, an edit is written to MANIFEST.
After flushing memtables, the obsoleted WALs are piggybacked to MANIFEST while writing the new L0 files to MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7601
Test Plan:
`track_and_verify_wals_in_manifest` is enabled by default for all tests extending `DBBasicTest`, and in db_stress_test.
Unit test `wal_edit_test`, `version_edit_test`, and `version_set_test` are also updated.
Watch all tests to pass.
Reviewed By: ltamasi
Differential Revision: D24553957
Pulled By: cheng-chang
fbshipit-source-id: 66a569ff1bdced38e22900bd240b73113906e040
Summary:
The old flag-based APIs (`BlockBasedTableOptions::pin_l0_filter_and_index_blocks_in_cache` and `BlockBasedTableOptions::pin_top_level_index_and_filter`) were insufficient for our needs. For example, it was impossible to pin only unpartitioned meta-blocks, which could prevent block cache contention when turning on dictionary compression or during a migration to partitioned indexes/filters. It was also impossible to pin all meta-blocks in memory while having predictable memory usage via block cache. If we had continued adding flags to address these scenarios, they would have had significant overlap causing confusion. Instead, this PR deprecates the flags and starts a new API with non-overlapping options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7520
Test Plan:
- new unit test
- added new options to stress/crash test and ran for a while: `$ python tools/db_crashtest.py blackbox --simple --max_key=1000000 -write_buffer_size=1048576 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 --interval=10 -value_size_mult=33 -column_families=1 -reopen=0`
Reviewed By: pdillinger
Differential Revision: D24200034
Pulled By: ajkr
fbshipit-source-id: 3fa7cfc71e7960f7a867511dd6ae5834dd73b13e
Summary:
It's important to make sure no false positive is reported when options.paranoid_file_checks is used. Add it to stress test and a place holder in crash test. It is disabled in crash test as there appears to be a bug causing false positive.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7473
Test Plan: Run crash test
Reviewed By: ajkr
Differential Revision: D24026939
fbshipit-source-id: 89102acb45cf041776775ce44a4eef4b0f3a380c
Summary:
This change reverts BackupEngine to 6.12 state to accommodate a
higher-priority fix that does not easily merge with this custom checksum
support. We intend to reinstate this support soon, by merging a revert
of this change.
For backupable_db_test, I've removed the tests depending on this
feature.
I've also removed relevant HISTORY.md entry.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7411
Test Plan: unit tests
Reviewed By: ajkr
Differential Revision: D23793835
Pulled By: pdillinger
fbshipit-source-id: 7e861436539584799b13d1a8ae559b81b6d08052
Summary:
Prior to 6.12, backup files using share_files_with_checksum had
the file size encoded in the file name, after the last '\_' and before
the last '.'. We considered this an implementation detail subject to
change, and indeed removed this information from the file name (with an
option to use old behavior) because it was considered
ineffective/inefficient for file name uniqueness. However, some
downstream RocksDB users were relying on this information since the file
size is not explicitly in the backup manifest file.
This primary purpose of this change is "retrofitting" the 6.12 release
(not yet a public release) to simultaneously support the benefits of the
new naming scheme (I/O performance and data correctness at scale) and
preserve the file size information, both as default behaviors. With this
change, we are essentially making the file size information encoded in
the file name an official, though obscure, extension of the backup meta
file format.
We preserve an option (kLegacyCrc32cAndFileSize) to use the original
"legacy" naming scheme, with its caveats, and make it easy to omit the
file size information (no kFlagIncludeFileSize), for more compact file
names. But note that changing the naming scheme used on an existing db
and backup directory can lead to transient space amplification, as some
files will be stored under two names in the shared_checksum directory.
Because some backups were saved using the original 6.12 naming scheme,
we offer two ways of dealing with those files: SST files generated by
older 6.12 versions can either use the default naming scheme in effect
when the SST files were generated (kFlagMatchInterimNaming, default, no
transient space amplification) or can use a new naming scheme (no
kFlagMatchInterimNaming, potential space amplification because some
already stored files getting a new name).
We don't have a natural way to detect which files were generated by
previous 6.12 versions, but this change hacks one in by changing DB
session ids to now use a more concise encoding, reducing file name
length, saving ~dozen bytes from SST files, and making them visually
distinct from DB ids so that they are less likely to be mixed up.
Two final auxiliary notes:
Recognizing that the backup file names have become a de facto part of
the backup meta schema, this change makes them easier to parse and
extend by putting a distinct marker, 's', before DB session ids embedded
in the name. When we extend this to allow custom checksums in the name,
they can get their own marker to ensure safe parsing. For backward
compatibility, file size does not get a marker but is assumed for
`_[0-9]+[.]`
Another change from initial 6.12 default behavior is never including
file custom checksum in the file name. Looking ahead to 6.13, we do not
want the default behavior to cause backup space amplification for
someone turning on file custom checksum checking in BackupEngine; we
want that to be an easy decision. When implemented, including file
custom checksums in backup file names will be a non-default option.
Actual file name patterns and priorities, as regexes:
kLegacyCrc32cAndFileSize OR pre-6.12 SST file ->
[0-9]+_[0-9]+_[0-9]+[.]sst
kFlagMatchInterimNaming set (default) AND early 6.12 SST file ->
[0-9]+_[0-9a-fA-F-]+[.]sst
kUseDbSessionId AND NOT kFlagIncludeFileSize ->
[0-9]+_s[0-9A-Z]{20}[.]sst
kUseDbSessionId AND kFlagIncludeFileSize (default) ->
[0-9]+_s[0-9A-Z]{20}_[0-9]+[.]sst
We might add opt-in options for more '\_' separated data in the name,
but embedded file size, if present, will always be after last '\_' and
before '.sst'.
This change was originally applied to version 6.12. (See https://github.com/facebook/rocksdb/issues/7390)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7400
Test Plan:
unit tests included. Sync point callbacks are used to mimic
previous version SST files.
Reviewed By: ajkr
Differential Revision: D23759587
Pulled By: pdillinger
fbshipit-source-id: f62d8af4e0978de0a34f26288cfbe66049b70025
Summary:
This is potentially the cause of failures:
Failure in Destroy restore dir with: IO error: file rmdir: /dev/shm/rocksdb/rocksdb_crashtest_whitebox/.restore13: Directory not empty
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7384
Test Plan: smoke test blackbox_crash_test
Reviewed By: jay-zhuang
Differential Revision: D23685087
Pulled By: pdillinger
fbshipit-source-id: 55f62e9853ce84be1d5ca7d856de867f0f2596ee
Summary:
We can only check key on restored backup if in a stress test
configuration locking the key. (Fixes mismatch seen in backup/restore
with atomic flush.)
TestCheckpoint used a very ugly solution to the same problem: copy-paste
dozens of lines of code with some changes and removals. I removed the
unnecessary implementation and made the existing one simply adaptive,
like TestBackupRestore.
Also made TestBackupRestore clean up dead backup/restore directories on
success.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7373
Test Plan:
blackbox_crash_test_with_atomic_flush for a while,
blackbox_crash_test for a while, with backup and checkpoint 1 in 5k and
only 1k max_keys to stress this area
Reviewed By: ajkr
Differential Revision: D23629057
Pulled By: pdillinger
fbshipit-source-id: d7fe7e2be75aaf3cf974be9540a7c5c5de8b371b
Summary:
(a) Missed a case in updating handling of rand_keys
(b) Only opening restored db with DB::Open so don't (yet)
attempt to open restored BlobDB or TransactionDB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7361
Test Plan: better than being broken
Reviewed By: ajkr
Differential Revision: D23592570
Pulled By: pdillinger
fbshipit-source-id: dd1d999bcc0c852ee77cb6041964ec4abc0fd4fd
Summary:
(1) Skip check on specific key if restoring an old backup
(small minority of cases) because it can fail in those cases. (2) Remove
an old assertion about number of column families and number of keys
passed in, which is broken by atomic flush (cf_consistency) test. Like
other code (for better or worse) assume a single key and iterate over
column families. (3) Apply mock_direct_io to NewSequentialFile so that
db_stress backup works on /dev/shm.
Also add more context to output in case of backup/restore db_stress
failure.
Also a minor fix to BackupEngine to report first failure status in
creating new backup, and drop another clue about the potential
source of a "Backup failed" status.
Reverts "Disable backup/restore stress test (https://github.com/facebook/rocksdb/issues/7350)"
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7357
Test Plan:
Using backup_one_in=10000,
"USE_CLANG=1 make crash_test_with_atomic_flush" for 30+ minutes
"USE_CLANG=1 make blackbox_crash_test" for 30+ minutes
And with use_direct_reads with TEST_TMPDIR=/dev/shm/rocksdb
Reviewed By: riversand963
Differential Revision: D23567244
Pulled By: pdillinger
fbshipit-source-id: e77171c2e8394d173917e36898c02dead1c40b77
Summary:
This change has the crash test randomly select from a few file
checksum implementations, or nullptr, for DB file_checksum_gen_factory.
For compatibility across runs on same DB, each non-null factory can
understand all the other functions, but the default changes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7343
Test Plan:
'make blackbox_crash_test' for a while, including with some
debug output to ensure code is being exercised.
Reviewed By: zhichao-cao
Differential Revision: D23494580
Pulled By: pdillinger
fbshipit-source-id: 73bbc7ca32c1adaf619134c0c830f12894880b8a
Summary:
Although added to db_stress, testing of backup/restore
was never integrated into the crash test, originally concerned about
performance. I've enabled it now and to address the peformance concern,
testing backup/restore is always skipped once the db exceeds a certain
size threshold, default 100MB. This should provide sufficient
opportunity for testing BackupEngine without bogging down everything
else with heavier and heavier operations.
Also fixed backup/restore in db_stress by making sure PurgeOldBackups
can remove manifest files, which are normally kept around for db_stress.
Added more coverage of backup options, and up to three backups being
saved in one backup directory (in some cases).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7348
Test Plan:
ran 'make blackbox_crash_test' for a while, with heightened
probabilitly of taking backups (1/10k). Also confirmed with some debug
output that the code is being covered, TestBackupRestore only takes
a few seconds to complete when triggered, and even at 1/10k and ~50MB
database, there's <,~ 1 thread testing backups at any time.
Reviewed By: ajkr
Differential Revision: D23510835
Pulled By: pdillinger
fbshipit-source-id: b6b8735591808141f81f10773ac31634cf03b6c0
Summary:
The mechanism to mark files for compaction is most commonly used in
delete-triggered compaction. This PR adds an option to exercise the
marking mechanism on random files created by db_stress. This PR also
enables that option in db_crashtest.py on its db_stress runs at random.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7231
Test Plan:
- ran some minified crash tests; verified they succeed and we see `"compaction_reason": "FilesMarkedForCompaction"` regularly in the logs.
```
$ TEST_TMPDIR=/dev/shm python tools/db_crashtest.py blackbox --duration=600 --interval=30 --max_key=10000000 --write_buffer_size=1048576 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --value_size_mult=33
$ TEST_TMPDIR=/dev/shm python tools/db_crashtest.py whitebox --duration=600 --interval=30 --max_key=1000000 --write_buffer_size=1048576 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --value_size_mult=33 --random_kill_odd=8887
```
Reviewed By: anand1976
Differential Revision: D23025156
Pulled By: ajkr
fbshipit-source-id: a404c467ebc12afa94dae35956ea9b372f592a96
Summary:
Cleans up some of the dependencies on test code in the Makefile while building tools:
- Moves the test::RandomString, DBBaseTest::RandomString into Random
- Moves the test::RandomHumanReadableString into Random
- Moves the DestroyDir method into file_utils
- Moves the SetupSyncPointsToMockDirectIO into sync_point.
- Moves the FaultInjection Env and FS classes under env
These changes allow all of the tools to build without dependencies on test_util, thereby simplifying the build dependencies. By moving the FaultInjection code, the dependency in db_stress on different libraries for debug vs release was eliminated.
Tested both release and debug builds via Make and CMake for both static and shared libraries.
More work remains to clean up how the tools are built and remove some unnecessary dependencies. There is also more work that should be done to get the Makefile and CMake to align in their builds -- what is in the libraries and the sizes of the executables are different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7097
Reviewed By: riversand963
Differential Revision: D22463160
Pulled By: pdillinger
fbshipit-source-id: e19462b53324ab3f0b7c72459dbc73165cc382b2
Summary:
There are errors like `Transaction put: Operation timed out: Timeout waiting to lock key
terminate called without an active exception`, based on experiment on devserver, increasing timeouts can resolve the issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7056
Test Plan: watch stress test with txn.
Reviewed By: anand1976
Differential Revision: D22317265
Pulled By: cheng-chang
fbshipit-source-id: 2dc3352def5e78d2c39a18d7262a3a65ca98bbba
Summary:
We see crash test occassionally fails with "A checkpoint operation failed with: Invalid argument: Directory exists". The suspicious is that the directory fails to be deleted because some trash files. Deep clean the directory after a DestroyDB() call.
Also add more debugging printf in case it fails.
Also, preserve the DB if verification fails.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7039
Test Plan: Run db_stress with low --checkpoint_one_in value
Reviewed By: riversand963
Differential Revision: D22271694
fbshipit-source-id: 6a9b2abb664fc69a4dc666741df4f6b23703cd6d
Summary:
New experimental option BBTO::optimize_filters_for_memory builds
filters that maximize their use of "usable size" from malloc_usable_size,
which is also used to compute block cache charges.
Rather than always "rounding up," we track state in the
BloomFilterPolicy object to mix essentially "rounding down" and
"rounding up" so that the average FP rate of all generated filters is
the same as without the option. (YMMV as heavily accessed filters might
be unluckily lower accuracy.)
Thus, the option near-minimizes what the block cache considers as
"memory used" for a given target Bloom filter false positive rate and
Bloom filter implementation. There are no forward or backward
compatibility issues with this change, though it only works on the
format_version=5 Bloom filter.
With Jemalloc, we see about 10% reduction in memory footprint (and block
cache charge) for Bloom filters, but 1-2% increase in storage footprint,
due to encoding efficiency losses (FP rate is non-linear with bits/key).
Why not weighted random round up/down rather than state tracking? By
only requiring malloc_usable_size, we don't actually know what the next
larger and next smaller usable sizes for the allocator are. We pick a
requested size, accept and use whatever usable size it has, and use the
difference to inform our next choice. This allows us to narrow in on the
right balance without tracking/predicting usable sizes.
Why not weight history of generated filter false positive rates by
number of keys? This could lead to excess skew in small filters after
generating a large filter.
Results from filter_bench with jemalloc (irrelevant details omitted):
(normal keys/filter, but high variance)
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9
Build avg ns/key: 29.6278
Number of filters: 5516
Total size (MB): 200.046
Reported total allocated memory (MB): 220.597
Reported internal fragmentation: 10.2732%
Bits/key stored: 10.0097
Average FP rate %: 0.965228
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory
Build avg ns/key: 30.5104
Number of filters: 5464
Total size (MB): 200.015
Reported total allocated memory (MB): 200.322
Reported internal fragmentation: 0.153709%
Bits/key stored: 10.1011
Average FP rate %: 0.966313
(very few keys / filter, optimization not as effective due to ~59 byte
internal fragmentation in blocked Bloom filter representation)
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9
Build avg ns/key: 29.5649
Number of filters: 162950
Total size (MB): 200.001
Reported total allocated memory (MB): 224.624
Reported internal fragmentation: 12.3117%
Bits/key stored: 10.2951
Average FP rate %: 0.821534
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory
Build avg ns/key: 31.8057
Number of filters: 159849
Total size (MB): 200
Reported total allocated memory (MB): 208.846
Reported internal fragmentation: 4.42297%
Bits/key stored: 10.4948
Average FP rate %: 0.811006
(high keys/filter)
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9
Build avg ns/key: 29.7017
Number of filters: 164
Total size (MB): 200.352
Reported total allocated memory (MB): 221.5
Reported internal fragmentation: 10.5552%
Bits/key stored: 10.0003
Average FP rate %: 0.969358
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory
Build avg ns/key: 30.7131
Number of filters: 160
Total size (MB): 200.928
Reported total allocated memory (MB): 200.938
Reported internal fragmentation: 0.00448054%
Bits/key stored: 10.1852
Average FP rate %: 0.963387
And from db_bench (block cache) with jemalloc:
$ ./db_bench -db=/dev/shm/dbbench.no_optimize -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false
$ ./db_bench -db=/dev/shm/dbbench -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -optimize_filters_for_memory -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false
$ (for FILE in /dev/shm/dbbench.no_optimize/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }'
17063835
$ (for FILE in /dev/shm/dbbench/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }'
17430747
$ #^ 2.1% additional filter storage
$ ./db_bench -db=/dev/shm/dbbench.no_optimize -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000
rocksdb.block.cache.index.add COUNT : 33
rocksdb.block.cache.index.bytes.insert COUNT : 8440400
rocksdb.block.cache.filter.add COUNT : 33
rocksdb.block.cache.filter.bytes.insert COUNT : 21087528
rocksdb.bloom.filter.useful COUNT : 4963889
rocksdb.bloom.filter.full.positive COUNT : 1214081
rocksdb.bloom.filter.full.true.positive COUNT : 1161999
$ #^ 1.04 % observed FP rate
$ ./db_bench -db=/dev/shm/dbbench -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -optimize_filters_for_memory -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000
rocksdb.block.cache.index.add COUNT : 33
rocksdb.block.cache.index.bytes.insert COUNT : 8448592
rocksdb.block.cache.filter.add COUNT : 33
rocksdb.block.cache.filter.bytes.insert COUNT : 18220328
rocksdb.bloom.filter.useful COUNT : 5360933
rocksdb.bloom.filter.full.positive COUNT : 1321315
rocksdb.bloom.filter.full.true.positive COUNT : 1262999
$ #^ 1.08 % observed FP rate, 13.6% less memory usage for filters
(Due to specific key density, this example tends to generate filters that are "worse than average" for internal fragmentation. "Better than average" cases can show little or no improvement.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6427
Test Plan: unit test added, 'make check' with gcc, clang and valgrind
Reviewed By: siying
Differential Revision: D22124374
Pulled By: pdillinger
fbshipit-source-id: f3e3aa152f9043ddf4fae25799e76341d0d8714e
Summary:
Added a `CompactionFilter` that is aware of the stress test's expected state. It only drops key versions that are already covered according to the expected state. It is incompatible with snapshots (same as all `CompactionFilter`s), so disables all snapshot-related features when used in the crash test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6988
Test Plan:
running a minified blackbox crash test
```
$ TEST_TMPDIR=/dev/shm python tools/db_crashtest.py blackbox --max_key=1000000 -write_buffer_size=1048576 -max_bytes_for_level_base=4194304 -target_file_size_base=1048576 -value_size_mult=33 --interval=10 --duration=3600
```
Reviewed By: anand1976
Differential Revision: D22072888
Pulled By: ajkr
fbshipit-source-id: 727b9d7a90d5eab18be0ec6cd5a810712ac13320
Summary:
Add crash test for the case of best-efforts recovery.
After a certain amount of time, we kill the db_stress process, randomly delete some certain table files and restart db_stress. Given the randomness of file deletion, it is difficult to verify against a reference for data correctness. Therefore, we just check that the db can restart successfully.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6819
Test Plan:
```
./db_stress -best_efforts_recovery=true -disable_wal=1 -reopen=0
./db_stress -best_efforts_recovery=true -disable_wal=0 -skip_verifydb=1 -verify_db_one_in=0 -continuous_verification_interval=0
make crash_test_with_best_efforts_recovery
```
Reviewed By: anand1976
Differential Revision: D21436753
Pulled By: riversand963
fbshipit-source-id: 0b3605c922a16c37ed17d5ab6682ca4240e47926
Akanksha Mahajan