Summary:
The `GetEntity` API is currently used in the stress tests for verification purposes;
this patch extends the coverage by adding a mode where all point lookups in
the non-batched, batched, and CF consistency stress tests are done using this API.
The PR also includes a bit of refactoring to eliminate some boilerplate code around
the wide-column consistency checks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11303
Test Plan: Ran stress tests of the batched, non-batched, and CF consistency varieties.
Reviewed By: akankshamahajan15
Differential Revision: D44148503
Pulled By: ltamasi
fbshipit-source-id: fecdbfd3e65a459bbf16ab7aa7b9173e19240077
Summary:
As the first step of covering the wide-column functionality of iterators
in our stress tests, the patch adds verification logic to
`NonBatchedOpsStressTest::VerifyDb` that checks whether the
iterator's value and columns are in sync. Note: I plan to update the other
types of stress tests and add similar verification for prefix scans etc.
in separate PRs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10783
Test Plan: Ran some simple blackbox crash tests.
Reviewed By: riversand963
Differential Revision: D40152370
Pulled By: riversand963
fbshipit-source-id: 8f9d17d7af5da58ccf1bd2057cab53cc9645ac35
Summary:
The patch adds the `PutEntity` API to the non-batched, batched, and
CF consistency stress tests. Namely, when the new `db_stress` command
line parameter `use_put_entity_one_in` is greater than zero, one in
N writes on average is performed using `PutEntity` rather than `Put`.
The wide-column entity written has the generated value in its default
column; in addition, it contains up to three additional columns where
the original generated value is divided up between the column name and the
column value (with the column name containing the first k characters of
the generated value, and the column value containing the rest). Whether
`PutEntity` is used (and if so, how many columns the entity has) is completely
determined by the "value base" used to generate the value (that is, there is
no randomness involved). Assuming the same `use_put_entity_one_in` setting
is used across `db_stress` invocations, this enables us to reconstruct and
validate the entity during subsequent `db_stress` runs.
Note that `PutEntity` is currently incompatible with `Merge`, transactions, and
user-defined timestamps; these combinations are currently disabled/disallowed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10760
Test Plan: Ran some batched, non-batched, and CF consistency stress tests using the script.
Reviewed By: riversand963
Differential Revision: D39939032
Pulled By: ltamasi
fbshipit-source-id: eafdf124e95993fb7d73158e3b006d11819f7fa9
Summary:
In `db_stress`, DB and expected state files containing changes leading up to a verification failure are often deleted, which makes debugging such failures difficult. On the DB side, flushed WAL files and compacted SST files are marked obsolete and then deleted. Without those files, we cannot pinpoint where a key that failed verification changed unexpectedly. On the expected state side, files for verifying prefix-recoverability in the presence of unsynced data loss are deleted before verification. These include a baseline state file containing the expected state at the time of the last successful verification, and a trace file containing all operations since then. Without those files, we cannot know the sequence of DB operations expected to be recovered.
This PR attempts to address this gap with a new `db_stress` flag: `preserve_unverified_changes`. Setting `preserve_unverified_changes=1` has two effects.
First, prior to startup verification, `db_stress` hardlinks all DB and expected state files in "unverified/" subdirectories of `FLAGS_db` and `FLAGS_expected_values_dir`. The separate directories are needed because the pre-verification opening process deletes files written by the previous `db_stress` run as described above. These "unverified/" subdirectories are cleaned up following startup verification success.
I considered other approaches for preserving DB files through startup verification, like using a read-only DB or preventing deletion of DB files externally, e.g., in the `Env` layer. However, I decided against it since such an approach would not work for expected state files, and I did not want to change the DB management logic. If there were a way to disable DB file deletions before regular DB open, I would have preferred to use that.
Second, `db_stress` attempts to keep all DB and expected state files that were live at some point since the start of the `db_stress` run. This is a bit tricky and involves the following changes.
- Open the DB with `disable_auto_compactions=1` and `avoid_flush_during_recovery=1`
- DisableFileDeletions()
- EnableAutoCompactions()
For this part, too, I would have preferred to use a hypothetical API that disables DB file deletion before regular DB open.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10659
Reviewed By: hx235
Differential Revision: D39407454
Pulled By: ajkr
fbshipit-source-id: 6e981025c7dce147649d2e770728471395a7fa53
Summary:
Before this PR, we call `now()` to get the wall time before performing point-lookup and range
scans when user-defined timestamp is enabled.
With this PR, we expand the coverage to:
- read with an older timestamp which is larger then the wall time when the process starts but potentially smaller than now()
- add coverage for `ReadOptions::iter_start_ts != nullptr`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10280
Test Plan:
```bash
make check
```
Also,
```bash
TEST_TMPDIR=/dev/shm/rocksdb make crash_test_with_ts
```
So far, we have had four successful runs of the above
In addition,
```bash
TEST_TMPDIR=/dev/shm/rocksdb make crash_test
```
Succeeded twice showing no regression.
Reviewed By: ltamasi
Differential Revision: D37539805
Pulled By: riversand963
fbshipit-source-id: f2d9887ad95245945ce17a014d55bb93f00e1cb5
Summary:
In RocksDB, keys are associated with (internal) sequence numbers which denote when the keys are written
to the database. Sequence numbers in different RocksDB instances are unrelated, thus not comparable.
It is nice if we can associate sequence numbers with their corresponding actual timestamps. One thing we can
do is to support user-defined timestamp, which allows the applications to specify the format of custom timestamps
and encode a timestamp with each key. More details can be found at https://github.com/facebook/rocksdb/wiki/User-defined-Timestamp-%28Experimental%29.
This PR provides a different but complementary approach. We can associate rocksdb snapshots (defined in
https://github.com/facebook/rocksdb/blob/7.2.fb/include/rocksdb/snapshot.h#L20) with **user-specified** timestamps.
Since a snapshot is essentially an object representing a sequence number, this PR establishes a bi-directional mapping between sequence numbers and timestamps.
In the past, snapshots are usually taken by readers. The current super-version is grabbed, and a `rocksdb::Snapshot`
object is created with the last published sequence number of the super-version. You can see that the reader actually
has no good idea of what timestamp to assign to this snapshot, because by the time the `GetSnapshot()` is called,
an arbitrarily long period of time may have already elapsed since the last write, which is when the last published
sequence number is written.
This observation motivates the creation of "timestamped" snapshots on the write path. Currently, this functionality is
exposed only to the layer of `TransactionDB`. Application can tell RocksDB to create a snapshot when a transaction
commits, effectively associating the last sequence number with a timestamp. It is also assumed that application will
ensure any two snapshots with timestamps should satisfy the following:
```
snapshot1.seq < snapshot2.seq iff. snapshot1.ts < snapshot2.ts
```
If the application can guarantee that when a reader takes a timestamped snapshot, there is no active writes going on
in the database, then we also allow the user to use a new API `TransactionDB::CreateTimestampedSnapshot()` to create
a snapshot with associated timestamp.
Code example
```cpp
// Create a timestamped snapshot when committing transaction.
txn->SetCommitTimestamp(100);
txn->SetSnapshotOnNextOperation();
txn->Commit();
// A wrapper API for convenience
Status Transaction::CommitAndTryCreateSnapshot(
std::shared_ptr<TransactionNotifier> notifier,
TxnTimestamp ts,
std::shared_ptr<const Snapshot>* ret);
// Create a timestamped snapshot if caller guarantees no concurrent writes
std::pair<Status, std::shared_ptr<const Snapshot>> snapshot = txn_db->CreateTimestampedSnapshot(100);
```
The snapshots created in this way will be managed by RocksDB with ref-counting and potentially shared with
other readers. We provide the following APIs for readers to retrieve a snapshot given a timestamp.
```cpp
// Return the timestamped snapshot correponding to given timestamp. If ts is
// kMaxTxnTimestamp, then we return the latest timestamped snapshot if present.
// Othersise, we return the snapshot whose timestamp is equal to `ts`. If no
// such snapshot exists, then we return null.
std::shared_ptr<const Snapshot> TransactionDB::GetTimestampedSnapshot(TxnTimestamp ts) const;
// Return the latest timestamped snapshot if present.
std::shared_ptr<const Snapshot> TransactionDB::GetLatestTimestampedSnapshot() const;
```
We also provide two additional APIs for stats collection and reporting purposes.
```cpp
Status TransactionDB::GetAllTimestampedSnapshots(
std::vector<std::shared_ptr<const Snapshot>>& snapshots) const;
// Return timestamped snapshots whose timestamps fall in [ts_lb, ts_ub) and store them in `snapshots`.
Status TransactionDB::GetTimestampedSnapshots(
TxnTimestamp ts_lb,
TxnTimestamp ts_ub,
std::vector<std::shared_ptr<const Snapshot>>& snapshots) const;
```
To prevent the number of timestamped snapshots from growing infinitely, we provide the following API to release
timestamped snapshots whose timestamps are older than or equal to a given threshold.
```cpp
void TransactionDB::ReleaseTimestampedSnapshotsOlderThan(TxnTimestamp ts);
```
Before shutdown, RocksDB will release all timestamped snapshots.
Comparison with user-defined timestamp and how they can be combined:
User-defined timestamp persists every key with a timestamp, while timestamped snapshots maintain a volatile
mapping between snapshots (sequence numbers) and timestamps.
Different internal keys with the same user key but different timestamps will be treated as different by compaction,
thus a newer version will not hide older versions (with smaller timestamps) unless they are eligible for garbage collection.
In contrast, taking a timestamped snapshot at a certain sequence number and timestamp prevents all the keys visible in
this snapshot from been dropped by compaction. Here, visible means (seq < snapshot and most recent).
The timestamped snapshot supports the semantics of reading at an exact point in time.
Timestamped snapshots can also be used with user-defined timestamp.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9879
Test Plan:
```
make check
TEST_TMPDIR=/dev/shm make crash_test_with_txn
```
Reviewed By: siying
Differential Revision: D35783919
Pulled By: riversand963
fbshipit-source-id: 586ad905e169189e19d3bfc0cb0177a7239d1bd4
Summary:
Previously all fault injection was ignored in release mode. This PR adds it back except for read fault injection (`--read_fault_one_in > 0`) since its dependency (`IGNORE_STATUS_IF_ERROR`) is unavailable in release mode.
Other notable changes include:
- Moved `EnableWriteErrorInjection()` for `--write_fault_one_in > 0` so it's after `DB::Open()` without depending on `SyncPoint`
- Made `--read_fault_one_in > 0` return an error in release mode
- Updated `db_crashtest.py` to always set `--read_fault_one_in=0` in release mode
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9957
Test Plan:
```
$ DEBUG_LEVEL=0 make -j24 db_stress
$ DEBUG_LEVEL=0 TEST_TMPDIR=/dev/shm python3 tools/db_crashtest.py blackbox
```
Reviewed By: anand1976
Differential Revision: D36193830
Pulled By: ajkr
fbshipit-source-id: 0b97946b4e3f06e3e0f6e7833c2763da08ec5321
Summary:
db_stress listener service always uses default filesystem to operate,
causing it to not recognize custom filesystem (like ZenFS plugin FS).
Pass the env to db_stress listener with the correct filesystem
information, so it can open the user intended filesystem.
Signed-off-by: Aravind Ramesh <Aravind.Ramesh@wdc.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9352
Reviewed By: riversand963
Differential Revision: D33776762
Pulled By: pdillinger
fbshipit-source-id: e79bb9a544384f80ae9dd0108241ab9c83223954
Summary:
When a previous run left behind historical state/trace files (implying it was run with --sync_fault_injection set), this PR uses them to restore the expected state according to the DB's recovered sequence number. That way, a tail of latest unsynced operations are permitted to be dropped, as is the case when data in page cache or certain `Env`s is lost. The point of the verification in this scenario is just to ensure there is no hole in the recovered data.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8966
Test Plan:
- ran it a while, made sure it is restoring expected values using the historical state/trace files:
```
$ rm -rf ./tmp-db/ ./exp/ && mkdir -p ./tmp-db/ ./exp/ && while ./db_stress -compression_type=none -clear_column_family_one_in=0 -expected_values_dir=./exp -sync_fault_injection=1 -destroy_db_initially=0 -db=./tmp-db -max_key=1000000 -ops_per_thread=10000 -reopen=0 -threads=32 ; do : ; done
```
Reviewed By: pdillinger
Differential Revision: D31219445
Pulled By: ajkr
fbshipit-source-id: f0e1d51fe5b35465b00565c33331190ea38ba0ad
Summary:
Add some basic test for user-defined timestamp to db_stress. Currently,
read with timestamp always tries to read using the current timestamp.
Due to the per-key timestamp-sequence ordering constraint, we only add timestamp-
related tests to the `NonBatchedOpsStressTest` since this test serializes accesses
to the same key and uses a file to cross-check data correctness.
The timestamp feature is not supported in a number of components, e.g. Merge, SingleDelete,
DeleteRange, CompactionFilter, Readonly instance, secondary instance, SST file ingestion, transaction,
etc. Therefore, db_stress should exit if user enables both timestamp and these features at the same
time. The (currently) incompatible features can be found in
`CheckAndSetOptionsForUserTimestamp`.
This PR also fixes a bug triggered when timestamp is enabled together with
`index_type=kBinarySearchWithFirstKey`. This bug fix will also be in another separate PR
with more unit tests coverage. Fixing it here because I do not want to exclude the index type
from crash test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8061
Test Plan: make crash_test_with_ts
Reviewed By: jay-zhuang
Differential Revision: D27056282
Pulled By: riversand963
fbshipit-source-id: c3e00ad1023fdb9ebbdf9601ec18270c5e2925a9
Summary:
Inject the random write error to stress test, it requires set reopen=0 and disable_wal=true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7653
Test Plan: pass db_stress and python3 db_crashtest.py blackbox
Reviewed By: ajkr
Differential Revision: D25354132
Pulled By: zhichao-cao
fbshipit-source-id: 44721104eecb416e27f65f854912c40e301dd669
Summary:
This change has the crash test randomly select from a few file
checksum implementations, or nullptr, for DB file_checksum_gen_factory.
For compatibility across runs on same DB, each non-null factory can
understand all the other functions, but the default changes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7343
Test Plan:
'make blackbox_crash_test' for a while, including with some
debug output to ensure code is being exercised.
Reviewed By: zhichao-cao
Differential Revision: D23494580
Pulled By: pdillinger
fbshipit-source-id: 73bbc7ca32c1adaf619134c0c830f12894880b8a
Summary:
This PR implements a fault injection mechanism for injecting errors in reads in db_stress. The FaultInjectionTestFS is used for this purpose. A thread local structure is used to track the errors, so that each db_stress thread can independently enable/disable error injection and verify observed errors against expected errors. This is initially enabled only for Get and MultiGet, but can be extended to iterator as well once its proven stable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6538
Test Plan:
crash_test
make check
Reviewed By: riversand963
Differential Revision: D20714347
Pulled By: anand1976
fbshipit-source-id: d7598321d4a2d72bda0ced57411a337a91d87dc7
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
Several improvements to crash_test/stress_test:
(1) Stress_test to support an parameter of bottommost compression
(2) Rename those FLAGS_* variables that are not gflags to avoid confusion
(3) Crash_test to randomly generate compression type for bottommost compression with half the chance.
(4) Stress_test to sanitize unsupported compression type to snappy, so that crash_test to cover all possible compression types and people don't need to worry about they don't support all comrpession types in their environment.
(5) In crash_test, when generating db_stress command, sort arguments in alphabeta order, so that it is easier to find value for a specific argument.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6215
Test Plan: Run "make crash_test" for a while and see the botommost option shown in LOG files.
Differential Revision: D19171255
fbshipit-source-id: d7001e246c4ff9ee5760776eea0be97738650735
Summary:
Currently, db_stress performs verification by calling `VerifyDb()` at the end of test and optionally before tests start. In case of corruption or incorrect result, it will be too late. This PR adds more verification in two ways.
1. For cf consistency test, each test thread takes a snapshot and verifies every N ops. N is configurable via `-verify_db_one_in`. This option is not supported in other stress tests.
2. For cf consistency test, we use another background thread in which a secondary instance periodically tails the primary (interval is configurable). We verify the secondary. Once an error is detected, we terminate the test and report. This does not affect other stress tests.
Test plan (devserver)
```
$./db_stress -test_cf_consistency -verify_db_one_in=0 -ops_per_thread=100000 -continuous_verification_interval=100
$./db_stress -test_cf_consistency -verify_db_one_in=1000 -ops_per_thread=10000 -continuous_verification_interval=0
$make crash_test
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6173
Differential Revision: D19047367
Pulled By: riversand963
fbshipit-source-id: aeed584ad71f9310c111445f34975e5ab47a0615
Summary:
compaction history is stored in manifest files. Preserve all of them in db_stress would help debugging.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6142
Test Plan: Run db_stress and observe that manifest files are preserved. Run whole crash_test and see how DB directory looks like.
Differential Revision: D19047026
fbshipit-source-id: f83c3e0bb5332b1b4768be5dcee56a24f9b760a9
Summary:
In the current db_stress, all the keys are generated randomly and follows the uniform distribution. In order to test some corner cases that some key are always updated or read, we need to generate the key based on other distributions. In this PR, the key is generated based on Zipfian distribution and the skewness can be controlled by setting hot_key_alpha (0.8 to 1.5 is suggested). The larger hot_key_alpha is, the more skewed will be. Not that, usually, if hot_key_alpha is larger than 2, there might be only 1 or 2 keys that are generated. If hot_key_alpha is 0, it generate the key follows uniform distribution (random key)
Testing plan: pass the db_stress and printed the keys to make sure it follows the distribution.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6163
Differential Revision: D18978480
Pulled By: zhichao-cao
fbshipit-source-id: e123b4865477f7478e83fb581f9576bada334680
Summary:
db_stress_tool.cc now is a giant file. In order to main it easier to improve and maintain, break it down to multiple source files.
Most classes are turned into their own files. Separate .h and .cc files are created for gflag definiations. Another .h and .cc files are created for some common functions. Some test execution logic that is only loosely related to class StressTest is moved to db_stress_driver.h and db_stress_driver.cc. All the files are located under db_stress_tool/. The directory name is created as such because if we end it with either stress or test, .gitignore will ignore any file under it and makes it prone to issues in developements.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6134
Test Plan: Build under GCC7 with and without LITE on using GNU Make. Build with GCC 4.8. Build with cmake with -DWITH_TOOL=1
Differential Revision: D18876064
fbshipit-source-id: b25d0a7451840f31ac0f5ebb0068785f783fdf7d
Levi Tamasi