Summary:
A relatively recent regression causes for every CF, create and open directory is called for the DB directory, unless CF has a private directory. This doesn't scale well with large number of column families.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6358
Test Plan: Run all existing tests and see it pass. strace with db_bench --num_column_families and observe it doesn't open directory for number of column families.
Differential Revision: D19675141
fbshipit-source-id: da01d9216f1dae3f03d4064fbd88ce71245bd9be
Summary:
In WritePrepared there could be gap in sequence numbers. This breaks the trick we use in kPointInTimeRecovery which assume the first seq in the log right after the corrupted log is one larger than the last seq we read from the logs. To let this trick keep working, we add a dummy entry with the expected sequence to the first log right after recovery.
Also in WriteCommitted, if the log right after the corrupted log is empty, since it has no sequence number to let the sequential trick work, it is assumed as unexpected behavior. This is however expected to happen if we close the db after recovering from a corruption and before writing anything new to it. To remedy that, we apply the same technique by writing a dummy entry to the log that is created after the corrupted log.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6313
Differential Revision: D19458291
Pulled By: maysamyabandeh
fbshipit-source-id: 09bc49e574690085df45b034ca863ff315937e2d
Summary:
The bad code was:
```
mutex.Lock(); // `mutex` protects `container`
for (auto& x : container) {
mutex.Unlock();
// do stuff to x
mutex.Lock();
}
```
It's incorrect because both `x` and the iterator may become invalid if another thread modifies the container while this thread is not holding the mutex.
Broken by https://github.com/facebook/rocksdb/pull/5796 - it replaced a `while (!container.empty())` loop with a `for (auto x : container)`.
(RocksDB code does a lot of such unlocking+re-locking of mutexes, and this type of bugs comes up a lot :/ )
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6193
Test Plan: Ran some logdevice integration tests that were crashing without this fix.
Differential Revision: D19116874
Pulled By: al13n321
fbshipit-source-id: 9672bc4227c1b68f46f7436db2b96811adb8c703
Summary:
I found that CleanupSuperVersion() may block Get() for 30ms+ （per MemTable is 256MB）.
Then I found "delete sv" in ~SuperVersion() takes the time.
The backtrace looks like this
DBImpl::GetImpl() -> DBImpl::ReturnAndCleanupSuperVersion() ->
DBImpl::CleanupSuperVersion() : delete sv; -> ~SuperVersion()
I think it's better to delete in a background thread, please review it。
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6146
Differential Revision: D18972066
fbshipit-source-id: 0f7b0b70b9bb1e27ad6fc1c8a408fbbf237ae08c
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
Summary:
**Summary:**
This PR fixes two unordered_write related issues:
- ingestion job may skip the necessary memtable flush https://github.com/facebook/rocksdb/issues/6026
- compact range may cause memtable is flushed before pending unordered write finished
1. `CompactRange` triggers memtable flush but doesn't wait for pending-writes
2. there are some pending writes but memtable is already flushed
3. the memtable related WAL is removed( note that the pending-writes were recorded in that WAL).
4. pending-writes write to newer created memtable
5. there is a restart
6. missing the previous pending-writes because WAL is removed but they aren't included in SST.
**How to solve:**
- Wait pending memtable writes before ingestion job check memtable key range
- Wait pending memtable writes before flush memtable.
**Note that: `CompactRange` calls `RangesOverlapWithMemtables` too without waiting for pending waits, but I'm not sure whether it affects the correctness.**
**Test Plan:**
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6113
Differential Revision: D18895674
Pulled By: maysamyabandeh
fbshipit-source-id: da22b4476fc7e06c176020e7cc171eb78189ecaf
Summary:
`low_pri_write_rate_limiter_` is not being used. Removing. `WriteController` has an internal low_pri rate limiter which is the real rate limiter for low-pri writes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6068
Test Plan: make
Differential Revision: D18664120
fbshipit-source-id: dfe3e4de033cf3522b67781b383aad7d0936034c
Summary:
After secondary instance replays the logs from primary, certain files become
obsolete. The secondary should find these files, evict their table readers from
table cache and close them. If this is not done, the secondary will hold on to
these files and prevent their space from being freed.
Test plan (devserver):
```
$./db_secondary_test --gtest_filter=DBSecondaryTest.SecondaryCloseFiles
$make check
$./db_stress -ops_per_thread=100000 -enable_secondary=true -threads=32 -secondary_catch_up_one_in=10000 -clear_column_family_one_in=1000 -reopen=100
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6114
Differential Revision: D18769998
Pulled By: riversand963
fbshipit-source-id: 5d1f151567247196164e1b79d8402fa2045b9120
Summary:
Add a new API that allows a user to call MultiGet specifying multiple keys belonging to different column families. This is mainly useful for users who want to do a consistent read of keys across column families, with the added performance benefits of batching and returning values using PinnableSlice.
As part of this change, the code in the original multi-column family MultiGet for acquiring the super versions has been refactored into a separate function that can be used by both, the batching and the non-batching versions of MultiGet.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5816
Test Plan:
make check
make asan_check
asan_crash_test
Differential Revision: D18408676
Pulled By: anand1976
fbshipit-source-id: 933e7bec91dd70e7b633be4ff623a1116cc28c8d
Summary:
In pipeline writing mode, memtable switching needs to wait for memtable writing to finish to make sure that when memtables are made immutable, inserts are not going to them. This is currently done in DBImpl::SwitchMemtable(). This is done after flush_scheduler_.TakeNextColumnFamily() is called to fetch the list of column families to switch. The function flush_scheduler_.TakeNextColumnFamily() itself, however, is not thread-safe when being called together with flush_scheduler_.ScheduleFlush().
This change provides a fix, which moves the waiting logic before flush_scheduler_.TakeNextColumnFamily(). WaitForPendingWrites() is a natural place where the logic can happen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5716
Test Plan: Run all tests with ASAN and TSAN.
Differential Revision: D18217658
fbshipit-source-id: b9c5e765c9989645bf10afda7c5c726c3f82f6c3
Summary:
Adding a new API to db.h that allows users to get file_creation_time of the oldest file in the DB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5948
Test Plan: Added unit test.
Differential Revision: D18056151
Pulled By: vjnadimpalli
fbshipit-source-id: 448ec9d34cb6772e1e5a62db399ace00dcbfbb5d
Summary:
When there are concurrent flush job on the same CF, `OnFlushCompleted` can be called before the flush result being install to LSM. Fixing the issue by passing `FlushJobInfo` through `MemTable`, and the thread who commit the flush result can fetch the `FlushJobInfo` and fire `OnFlushCompleted` on behave of the thread actually writing the SST.
Fix https://github.com/facebook/rocksdb/issues/5892
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5908
Test Plan: Add new test. The test will fail without the fix.
Differential Revision: D17916144
Pulled By: riversand963
fbshipit-source-id: e18df67d9533b5baee52ae3605026cdeb05cbe10
Summary:
purge_queue_ maybe contains thousands sst files, for example manual compact a range. If full scan is triggered at the same time and the total sst files number is large, RocksDB will be blocked at https://github.com/facebook/rocksdb/blob/master/db/db_impl_files.cc#L150 for several seconds. In our environment we have 140,000 sst files and the manual compaction delete about 1000 sst files, it blocked about 2 minutes.
Commandeering https://github.com/facebook/rocksdb/issues/5290.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5796
Differential Revision: D17357775
Pulled By: riversand963
fbshipit-source-id: 20eacca917355b8de975ccc7b1c9a3e7bd5b201a
Summary:
Manual compaction may bring in very high load because sometime the amount of data involved in a compaction could be large, which may affect online service. So it would be good if the running compaction making the server busy can be stopped immediately. In this implementation, stopping manual compaction condition is only checked in slow process. We let deletion compaction and trivial move go through.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3971
Test Plan: add tests at more spots.
Differential Revision: D17369043
fbshipit-source-id: 575a624fb992ce0bb07d9443eb209e547740043c
Summary:
Use delete to disable automatic generated methods instead of private, and put the constructor together for more clear.This modification cause the unused field warning, so add unused attribute to disable this warning.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5009
Differential Revision: D17288733
fbshipit-source-id: 8a767ce096f185f1db01bd28fc88fef1cdd921f3
Summary:
Adding a light weight API to get last live WAL file name and size. Meant to be used as a helper for backup/restore tooling in a larger ecosystem such as MySQL with a MyRocks storage engine.
Specifically within MySQL's backup/restore mechanism, this call can be made with a write lock on the mysql db to get a transactionally consistent snapshot of the current WAL file position along with other non-rocksdb log/data files.
Without this, the alternative would be to take the aforementioned lock, scan the WAL dir for all files, find the last file and note its exact size as the rocksdb 'checkpoint'.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5765
Differential Revision: D17172717
Pulled By: affandar
fbshipit-source-id: f2fabafd4c0e6fc45f126670c8c88a9f84cb8a37
Summary:
Each DB has a globally unique ID. A DB can be physically copied around, or backed-up and restored, and the users should be identify the same DB. This unique ID right now is stored as plain text in file IDENTITY under the DB directory. This approach introduces at least two problems: (1) the file is not checksumed; (2) the source of truth of a DB is the manifest file, which can be copied separately from IDENTITY file, causing the DB ID to be wrong.
The goal of this PR is solve this problem by moving the DB ID to manifest. To begin with we will write to both identity file and manifest. Write to Manifest is controlled via the flag write_dbid_to_manifest in Options and default is false.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5725
Test Plan: Added unit tests.
Differential Revision: D16963840
Pulled By: vjnadimpalli
fbshipit-source-id: 8a86a4c8c82c716003c40fd6b9d2d758030d92e9
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022
Differential Revision: D14394062
Pulled By: miasantreble
fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
Summary:
Right now VerifyChecksum() doesn't do read-ahead. In some use cases, users won't be able to achieve good performance. With this change, by default, RocksDB will do a default readahead, and users will be able to overwrite the readahead size by passing in a ReadOptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5713
Test Plan: Add a new unit test.
Differential Revision: D16860874
fbshipit-source-id: 0cff0fe79ac855d3d068e6ccd770770854a68413
Summary:
Add a command in ldb so that users can print out tombstones in SST files.
In order to test the code, change the interface of LDBCommandRunner::RunCommand() so that it doesn't return from the program, but return the status code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5615
Test Plan: Add a new unit test
Differential Revision: D16550326
fbshipit-source-id: 88ddfe6984bdcbb3a528abdd115089df09eba52e
Summary:
This is a new API added to db.h to allow for fetching all merge operands associated with a Key. The main motivation for this API is to support use cases where doing a full online merge is not necessary as it is performance sensitive. Example use-cases:
1. Update subset of columns and read subset of columns -
Imagine a SQL Table, a row is encoded as a K/V pair (as it is done in MyRocks). If there are many columns and users only updated one of them, we can use merge operator to reduce write amplification. While users only read one or two columns in the read query, this feature can avoid a full merging of the whole row, and save some CPU.
2. Updating very few attributes in a value which is a JSON-like document -
Updating one attribute can be done efficiently using merge operator, while reading back one attribute can be done more efficiently if we don't need to do a full merge.
----------------------------------------------------------------------------------------------------
API :
Status GetMergeOperands(
const ReadOptions& options, ColumnFamilyHandle* column_family,
const Slice& key, PinnableSlice* merge_operands,
GetMergeOperandsOptions* get_merge_operands_options,
int* number_of_operands)
Example usage :
int size = 100;
int number_of_operands = 0;
std::vector<PinnableSlice> values(size);
GetMergeOperandsOptions merge_operands_info;
db_->GetMergeOperands(ReadOptions(), db_->DefaultColumnFamily(), "k1", values.data(), merge_operands_info, &number_of_operands);
Description :
Returns all the merge operands corresponding to the key. If the number of merge operands in DB is greater than merge_operands_options.expected_max_number_of_operands no merge operands are returned and status is Incomplete. Merge operands returned are in the order of insertion.
merge_operands-> Points to an array of at-least merge_operands_options.expected_max_number_of_operands and the caller is responsible for allocating it. If the status returned is Incomplete then number_of_operands will contain the total number of merge operands found in DB for key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5604
Test Plan:
Added unit test and perf test in db_bench that can be run using the command:
./db_bench -benchmarks=getmergeoperands --merge_operator=sortlist
Differential Revision: D16657366
Pulled By: vjnadimpalli
fbshipit-source-id: 0faadd752351745224ee12d4ae9ef3cb529951bf
Summary:
The new DB::GetApproximateSizes with SizeApproximationOptions argument, which allows to add more options/knobs to the DB::GetApproximateSizes call (beyond only the include_flags)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5626
Differential Revision: D16496913
Pulled By: elipoz
fbshipit-source-id: ee8c6c182330a285fa056ecfc3905a592b451720
Summary:
Refresh of the earlier change here - https://github.com/facebook/rocksdb/issues/5135
This is a review request for code change needed for - https://github.com/facebook/rocksdb/issues/3469
"Add support for taking snapshot of a column family and creating column family from a given CF snapshot"
We have an implementation for this that we have been testing internally. We have two new APIs that together provide this functionality.
(1) ExportColumnFamily() - This API is modelled after CreateCheckpoint() as below.
// Exports all live SST files of a specified Column Family onto export_dir,
// returning SST files information in metadata.
// - SST files will be created as hard links when the directory specified
// is in the same partition as the db directory, copied otherwise.
// - export_dir should not already exist and will be created by this API.
// - Always triggers a flush.
virtual Status ExportColumnFamily(ColumnFamilyHandle* handle,
const std::string& export_dir,
ExportImportFilesMetaData** metadata);
Internally, the API will DisableFileDeletions(), GetColumnFamilyMetaData(), Parse through
metadata, creating links/copies of all the sst files, EnableFileDeletions() and complete the call by
returning the list of file metadata.
(2) CreateColumnFamilyWithImport() - This API is modeled after IngestExternalFile(), but invoked only during a CF creation as below.
// CreateColumnFamilyWithImport() will create a new column family with
// column_family_name and import external SST files specified in metadata into
// this column family.
// (1) External SST files can be created using SstFileWriter.
// (2) External SST files can be exported from a particular column family in
// an existing DB.
// Option in import_options specifies whether the external files are copied or
// moved (default is copy). When option specifies copy, managing files at
// external_file_path is caller's responsibility. When option specifies a
// move, the call ensures that the specified files at external_file_path are
// deleted on successful return and files are not modified on any error
// return.
// On error return, column family handle returned will be nullptr.
// ColumnFamily will be present on successful return and will not be present
// on error return. ColumnFamily may be present on any crash during this call.
virtual Status CreateColumnFamilyWithImport(
const ColumnFamilyOptions& options, const std::string& column_family_name,
const ImportColumnFamilyOptions& import_options,
const ExportImportFilesMetaData& metadata,
ColumnFamilyHandle** handle);
Internally, this API creates a new CF, parses all the sst files and adds it to the specified column family, at the same level and with same sequence number as in the metadata. Also performs safety checks with respect to overlaps between the sst files being imported.
If incoming sequence number is higher than current local sequence number, local sequence
number is updated to reflect this.
Note, as the sst files is are being moved across Column Families, Column Family name in sst file
will no longer match the actual column family on destination DB. The API does not modify Column
Family name or id in the sst files being imported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5495
Differential Revision: D16018881
fbshipit-source-id: 9ae2251025d5916d35a9fc4ea4d6707f6be16ff9
Summary:
1. Cleanup WAL trash files on open
2. Don't apply deletion rate limit if WAL dir is different from db dir
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5520
Test Plan: Add new unit tests and make check
Differential Revision: D16096750
Pulled By: anand1976
fbshipit-source-id: 6f07858ad864b754b711db416f0389c45ede599b
Summary:
This is to prevent bg flush thread from unrefing and deleting the cfd that has been dropped by a concurrent thread.
Before RocksDB calls `DBImpl::WaitForFlushMemTables`, we should increase the refcount of each `ColumnFamilyData` so that its ref count will not drop to 0 even if the column family is dropped by another thread. Otherwise the bg flush thread can deref the cfd and deletes it, causing a segfault in `WaitForFlushMemtables` upon accessing `cfd`.
Test plan (on devserver):
```
$make clean && COMPILE_WITH_ASAN=1 make -j32
$make check
```
All unit tests must pass.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5513
Differential Revision: D16062898
Pulled By: riversand963
fbshipit-source-id: 37dc511f1dc99f036d0201bbd7f0a8f5677c763d
Summary:
WAL records RocksDB writes to all column families. When user flushes a a column family, the old WAL will not accept new writes but cannot be deleted yet because it may still contain live data for other column families. (See https://github.com/facebook/rocksdb/wiki/Write-Ahead-Log#life-cycle-of-a-wal for detailed explanation)
Because of this, if there is a column family that receive very infrequent writes and no manual flush is called for it, it could prevent a lot of WALs from being deleted. PR https://github.com/facebook/rocksdb/pull/5046 introduced persistent stats column family which is a good example of such column families. Depending on the config, it may have long intervals between writes, and user is unaware of it which makes it difficult to call manual flush for it.
This PR addresses the problem for persistent stats column family by forcing a flush for persistent stats column family when 1) another column family is flushed 2) persistent stats column family's log number is the smallest among all column families, this way persistent stats column family will keep advancing its log number when necessary, allowing RocksDB to delete old WAL files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5509
Differential Revision: D16045896
Pulled By: miasantreble
fbshipit-source-id: 286837b633e988417f0096ff38384742d3b40ef4
Summary:
It it not safe to assume application had sync the SST file before ingest it into DB. Also the directory to put the ingested file needs to be fsync, otherwise the file can be lost. For integrity of RocksDB we need to sync the ingested file and directory before apply the change to manifest.
Also syncing after writing global sequence when write_global_seqno=true was removed in https://github.com/facebook/rocksdb/issues/4172. Adding it back.
Fixes https://github.com/facebook/rocksdb/issues/5287.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5435
Test Plan:
Test ingest file with ldb command and observe fsync/fdatasync in strace output. Tried both move_files=true and move_files=false.
https://gist.github.com/yiwu-arbug/650a4023f57979056d83485fa863bef9
More test suggestions are welcome.
Differential Revision: D15941675
Pulled By: riversand963
fbshipit-source-id: 389533f3923065a96df2cdde23ff4724a1810d78
Summary:
This PR continues the work in https://github.com/facebook/rocksdb/pull/4748 and https://github.com/facebook/rocksdb/pull/4535 by adding a new DBOption `persist_stats_to_disk` which instructs RocksDB to persist stats history to RocksDB itself. When statistics is enabled, and both options `stats_persist_period_sec` and `persist_stats_to_disk` are set, RocksDB will periodically write stats to a built-in column family in the following form: key -> (timestamp in microseconds)#(stats name), value -> stats value. The existing API `GetStatsHistory` will detect the current value of `persist_stats_to_disk` and either read from in-memory data structure or from the hidden column family on disk.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5046
Differential Revision: D15863138
Pulled By: miasantreble
fbshipit-source-id: bb82abdb3f2ca581aa42531734ac799f113e931b
Summary:
This PR integrates the block cache tracer class into db_impl.cc.
db_impl.cc contains a member variable of AtomicBlockCacheTraceWriter class and passes its reference to the block_based_table_reader.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5433
Differential Revision: D15728016
Pulled By: HaoyuHuang
fbshipit-source-id: 23d5659e8c82d556833dcc1a5558aac8c1f7db71
Summary:
If a memtable definitely covers a key, there isn't a need to check older memtables.
We can skip them by checking the earliest sequence number.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4941
Differential Revision: D13932666
fbshipit-source-id: b9d52f234b8ad9dd3bf6547645cd457175a3ca9b
Summary:
To avoid deadlock mutex_ should never be acquired before log_write_mutex_. The patch documents that and also fixes one case in ::FlushWAL that acquires mutex_ through ::WriteStatusCheck when it already holds lock on log_write_mutex_.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5437
Differential Revision: D15749722
Pulled By: maysamyabandeh
fbshipit-source-id: f57b69c44b4b80cc6d7ddf3d3fdf4a9eb5a5a45a
Summary:
The PR #5275 separated the column dropped and shutdown status codes. However, there were a couple of places in compaction where this change ended up treating a ShutdownInProgress() error as a real error and set bg_error. This caused MyRocks unit test to fail due to WAL writes during shutdown returning this error. Fix it by ignoring the shutdown status during compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5400
Differential Revision: D15611680
Pulled By: anand1976
fbshipit-source-id: c602e97840e3ae24eb420d61e0ce95d3e6258632
Summary:
Currently we validate options in DB::Open. However the validation step is missing when options are dynamically updated in ::SetOptions. The patch fixes that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5368
Differential Revision: D15540101
Pulled By: maysamyabandeh
fbshipit-source-id: d27bbffd8f0252d1b50bcf59e0a70a278ed937f4
Summary:
util/ means for lower level libraries. trace_replay is highly integrated to DB and sometimes call DB. Move it out to a separate directory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5376
Differential Revision: D15550938
Pulled By: siying
fbshipit-source-id: f46dce5ceffdc05a73f26379c7bb1b79ebe6c207
Summary:
Many logging related source files are under util/. It will be more structured if they are together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5387
Differential Revision: D15579036
Pulled By: siying
fbshipit-source-id: 3850134ed50b8c0bb40a0c8ae1f184fa4081303f
Summary:
The methods and fields in the private section of DBImpl were all intermingled, making it hard to figure out where the fields/methods start and where they end. I cleaned up the code a little so that all the type declaration are at the beginning, followed by methods, and all the data fields are at the end. This follows
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5385
Differential Revision: D15566978
Pulled By: sagar0
fbshipit-source-id: 4618a7d819ad4e2d7cc9ae1af2c59f400140bb1b
Summary:
Add some comments in db_impl.h. Also reordered function order a little bit so that I can add a comment to flag the area of functions implementing DB interface.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5338
Differential Revision: D15498284
Pulled By: siying
fbshipit-source-id: 3d7c59c8303577fe44d13c74ae84c7ce05164f77
Summary:
RocksDB secondary can replay both MANIFEST and WAL now.
On the one hand, the memory usage by memtables will grow after replaying WAL for sometime. On the other hand, replaying the MANIFEST can bring the database persistent data to a more recent point in time, giving us the opportunity to discard some memtables containing out-dated data.
This PR coordinates the MANIFEST and WAL replay, using the updates from MANIFEST replay to update the active memtable and immutable memtable list of each column family.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5305
Differential Revision: D15386512
Pulled By: riversand963
fbshipit-source-id: a3ea6fc415f8382d8cf624f52a71ebdcffa3e355
Summary:
Performing unordered writes in rocksdb when unordered_write option is set to true. When enabled the writes to memtable are done without joining any write thread. This offers much higher write throughput since the upcoming writes would not have to wait for the slowest memtable write to finish. The tradeoff is that the writes visible to a snapshot might change over time. If the application cannot tolerate that, it should implement its own mechanisms to work around that. Using TransactionDB with WRITE_PREPARED write policy is one way to achieve that. Doing so increases the max throughput by 2.2x without however compromising the snapshot guarantees.
The patch is prepared based on an original by siying
Existing unit tests are extended to include unordered_write option.
Benchmark Results:
```
TEST_TMPDIR=/dev/shm/ ./db_bench_unordered --benchmarks=fillrandom --threads=32 --num=10000000 -max_write_buffer_number=16 --max_background_jobs=64 --batch_size=8 --writes=3000000 -level0_file_num_compaction_trigger=99999 --level0_slowdown_writes_trigger=99999 --level0_stop_writes_trigger=99999 -enable_pipelined_write=false -disable_auto_compactions --unordered_write=1
```
With WAL
- Vanilla RocksDB: 78.6 MB/s
- WRITER_PREPARED with unordered_write: 177.8 MB/s (2.2x)
- unordered_write: 368.9 MB/s (4.7x with relaxed snapshot guarantees)
Without WAL
- Vanilla RocksDB: 111.3 MB/s
- WRITER_PREPARED with unordered_write: 259.3 MB/s MB/s (2.3x)
- unordered_write: 645.6 MB/s (5.8x with relaxed snapshot guarantees)
- WRITER_PREPARED with unordered_write disable concurrency control: 185.3 MB/s MB/s (2.35x)
Limitations:
- The feature is not yet extended to `max_successive_merges` > 0. The feature is also incompatible with `enable_pipelined_write` = true as well as with `allow_concurrent_memtable_write` = false.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5218
Differential Revision: D15219029
Pulled By: maysamyabandeh
fbshipit-source-id: 38f2abc4af8780148c6128acdba2b3227bc81759
Summary:
Part of compaction cpu goes to processing snapshot list, the larger the list the bigger the overhead. Although the lifetime of most of the snapshots is much shorter than the lifetime of compactions, the compaction conservatively operates on the list of snapshots that it initially obtained. This patch allows the snapshot list to be updated via a callback if the compaction is taking long. This should let the compaction to continue more efficiently with much smaller snapshot list.
For simplicity, to avoid the feature is disabled in two cases: i) When more than one sub-compaction are sharing the same snapshot list, ii) when Range Delete is used in which the range delete aggregator has its own copy of snapshot list.
This fixes the reverted https://github.com/facebook/rocksdb/pull/5099 issue with range deletes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5278
Differential Revision: D15203291
Pulled By: maysamyabandeh
fbshipit-source-id: fa645611e606aa222c7ce53176dc5bb6f259c258
Summary:
Our daily stress tests are failing after this feature. Reverting temporarily until we figure the reason for test failures.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5269
Differential Revision: D15151285
Pulled By: maysamyabandeh
fbshipit-source-id: e4002b99690a97df30d4b4b58bf0f61e9591bc6e
Summary:
Part of compaction cpu goes to processing snapshot list, the larger the list the bigger the overhead. Although the lifetime of most of the snapshots is much shorter than the lifetime of compactions, the compaction conservatively operates on the list of snapshots that it initially obtained. This patch allows the snapshot list to be updated via a callback if the compaction is taking long. This should let the compaction to continue more efficiently with much smaller snapshot list.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5099
Differential Revision: D15086710
Pulled By: maysamyabandeh
fbshipit-source-id: 7649f56c3b6b2fb334962048150142a3bf9c1a12
Summary: PR https://github.com/facebook/rocksdb/pull/4899 implemented the general framework for RocksDB secondary instances. This PR adds the support for WAL tailing in `OpenAsSecondary`, which means after the `OpenAsSecondary` call, the secondary is now able to see primary's writes that are yet to be flushed. The secondary can see primary's writes in the WAL up to the moment of `OpenAsSecondary` call starts.
Differential Revision: D15059905
Pulled By: miasantreble
fbshipit-source-id: 44f71f548a30b38179a7940165e138f622de1f10
Summary:
Depending on the config, manual compaction (leveled compaction style) does following compactions:
L0->L1
L1->L2
...
Ln-1 -> Ln
Ln -> Ln
The final Ln -> Ln compaction is partly unnecessary as it recompacts all the files that were just generated by the Ln-1 -> Ln. We should avoid recompacting such files. This rule should be applied to Lmax only.
Resolves issue https://github.com/facebook/rocksdb/issues/4995
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5138
Differential Revision: D14940106
Pulled By: miasantreble
fbshipit-source-id: 8d3cf5507a17e76f3333cfd4bac5256d005636e5
Summary:
Right now, two separate pieces of code are used to create WAL files in DBImpl::Open function of db_impl_open.cc and DBImpl::SwitchMemtable function of db_impl_write.cc. This code change simply creates 1 function called DBImpl::CreateWAL in db_impl_open.cc which is used to replace existing WAL creation logic in DBImpl::Open and DBImpl::SwitchMemtable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5188
Differential Revision: D14942832
Pulled By: vjnadimpalli
fbshipit-source-id: d49230e04c36176015c8c1b422575872f92157fb
sdong