Summary:
The origin error message of uncompressing block is confusing, which may result from either build support or data corruption.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8934
Reviewed By: ltamasi
Differential Revision: D31112588
Pulled By: pdillinger
fbshipit-source-id: 1cbf2d4fbcb0ef376cf942246d06f48cb603f852
Summary:
The ImmutableCFOptions contained a bunch of fields that belonged to the ImmutableDBOptions. This change cleans that up by introducing an ImmutableOptions struct. Following the pattern of Options struct, this class inherits from the DB and CFOption structs (of the Immutable form).
Only one structural change (the ImmutableCFOptions::fs was changed to a shared_ptr from a raw one) is in this PR. All of the other changes involve moving the member variables from the ImmutableCFOptions into the ImmutableOptions and changing member variables or function parameters as required for compilation purposes.
Follow-on PRs may do a further clean-up of the code, such as renaming variables (such as "ImmutableOptions cf_options") and potentially eliminating un-needed function parameters (there is no longer a need to pass both an ImmutableDBOptions and an ImmutableOptions to a function).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8262
Reviewed By: pdillinger
Differential Revision: D28226540
Pulled By: mrambacher
fbshipit-source-id: 18ae71eadc879dedbe38b1eb8e6f9ff5c7147dbf
Summary:
Renaming ImmutableCFOptions::info_log and statistics to logger and stats. This is stage 2 in creating an ImmutableOptions class. It is necessary because the names match those in ImmutableOptions and have different types.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8227
Reviewed By: jay-zhuang
Differential Revision: D28000967
Pulled By: mrambacher
fbshipit-source-id: 3bf2aa04e8f1e8724d825b7deacf41080c14420b
Summary:
For performance purposes, the lower level routines were changed to use a SystemClock* instead of a std::shared_ptr<SystemClock>. The shared ptr has some performance degradation on certain hardware classes.
For most of the system, there is no risk of the pointer being deleted/invalid because the shared_ptr will be stored elsewhere. For example, the ImmutableDBOptions stores the Env which has a std::shared_ptr<SystemClock> in it. The SystemClock* within the ImmutableDBOptions is essentially a "short cut" to gain access to this constant resource.
There were a few classes (PeriodicWorkScheduler?) where the "short cut" property did not hold. In those cases, the shared pointer was preserved.
Using db_bench readrandom perf_level=3 on my EC2 box, this change performed as well or better than 6.17:
6.17: readrandom : 28.046 micros/op 854902 ops/sec; 61.3 MB/s (355999 of 355999 found)
6.18: readrandom : 32.615 micros/op 735306 ops/sec; 52.7 MB/s (290999 of 290999 found)
PR: readrandom : 27.500 micros/op 871909 ops/sec; 62.5 MB/s (367999 of 367999 found)
(Note that the times for 6.18 are prior to revert of the SystemClock).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8033
Reviewed By: pdillinger
Differential Revision: D27014563
Pulled By: mrambacher
fbshipit-source-id: ad0459eba03182e454391b5926bf5cdd45657b67
Summary:
Introduces and uses a SystemClock class to RocksDB. This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.
Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead. There are likely more places that can be changed, but this is a start to show what can/should be done. Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.
There are several Env classes that implement these functions. Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR. It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).
Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858
Reviewed By: pdillinger
Differential Revision: D26006406
Pulled By: mrambacher
fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
Summary:
Return the Status from TryReadFromCache() in an argument to make it easier to report prefetch errors to the user.
Tests:
make crash_test
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7816
Reviewed By: akankshamahajan15
Differential Revision: D25717222
Pulled By: anand1976
fbshipit-source-id: c320d3c12d4146bda16df78ff6927eee584c1810
Summary:
Fix initialization order of DBOptions and kHostnameForDbHostId by making the initialization of the latter static rather than dynamic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7702
Reviewed By: ajkr
Differential Revision: D25111633
Pulled By: anand1976
fbshipit-source-id: 7afad834a66e40bcd8694a43b40d378695212224
Summary:
This is a PR generated **semi-automatically** by an internal tool to remove unused includes and `using` statements.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7604
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D24579392
Pulled By: riversand963
fbshipit-source-id: c4bfa6c6b08da1de186690d37eb73d8fff45aecd
Summary:
This PR adds support for writing a location identifier of the DB host to SST files as a table property. By default, the hostname is used, but can be overridden by the user. There have been some recent corruptions in files written by ```SstFileWriter``` before checksumming, so this property can be used to trace it back to the writing host and checking the host for hardware isues.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7479
Test Plan: Add new unit tests
Reviewed By: pdillinger
Differential Revision: D24340671
Pulled By: anand1976
fbshipit-source-id: 2038949fd8d160c0633ccb4f9da77740f19fa2a2
Summary:
The patch introduces a helper method in `util/compression.h` called `UncompressData`
that dispatches calls to the correct uncompression method based on type, and changes
`UncompressBlockContentsForCompressionType` and `Benchmark::Uncompress` in
`db_bench` so they are implemented in terms of the new method. This eliminates
some code duplication. (`Benchmark::Compress` is also updated to use the previously
introduced `CompressData` helper.)
In addition, the patch brings the implementation of `Snappy_Uncompress` into sync with
the other uncompression methods by making the method compute the buffer size and allocate
the buffer itself. Finally, the patch eliminates some potentially risky back-and-forth conversions
between various unsigned and signed integer types by exposing the size of the allocated buffer
as a `size_t` instead of an `int`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7434
Test Plan:
`make check`
`./db_bench -benchmarks=compress,uncompress --compression_type ...`
Reviewed By: riversand963
Differential Revision: D23900011
Pulled By: ltamasi
fbshipit-source-id: b25df63ceec4639889be94acb22eb53e530c54e0
Summary:
The patch cleans up and refactors `CompressBlock` and `CompressBlockInternal` a bit.
In particular, it does the following:
* It renames `CompressBlockInternal` to `CompressData` and moves it to `util/compression.h`,
where other general compression-related utilities are located. This will facilitate reuse in the
BlobDB write path.
* The signature of the method is changed so it now takes `compression_format_version`
(similarly to the compression library specific methods) instead of `format_version` (which is
specific to the block based table).
* `GetCompressionFormatForVersion` no longer takes `compression_type` as a parameter.
This parameter was only used in a (not entirely up-to-date) assertion; also, removing it
eliminates the need to ensure this precondition holds at all call sites.
* Does some minor cleanup in `CompressBlock`, for instance, it is now possible to pass
only one of `sampled_output_fast` and `sampled_output_slow`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7249
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23087278
Pulled By: ltamasi
fbshipit-source-id: e6316e45baed8b4e7de7c1780c90501c2a3439b3
Summary:
Current implementation of the ```read_options.deadline``` option only checks the deadline for random file reads during point lookups. This PR extends the checks to file opens, prefetches and preloads as part of table open.
The main changes are in the ```BlockBasedTable```, partitioned index and filter readers, and ```TableCache``` to take ReadOptions as an additional parameter. In ```BlockBasedTable::Open```, in order to retain existing behavior w.r.t checksum verification and block cache usage, we filter out most of the options in ```ReadOptions``` except ```deadline```. However, having the ```ReadOptions``` gives us more flexibility to honor other options like verify_checksums, fill_cache etc. in the future.
Additional changes in callsites due to function signature changes in ```NewTableReader()``` and ```FilePrefetchBuffer```.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6982
Test Plan: Add new unit tests in db_basic_test
Reviewed By: riversand963
Differential Revision: D22219515
Pulled By: anand1976
fbshipit-source-id: 8a3b92f4a889808013838603aa3ca35229cd501b
Summary:
Currently there is no check for whether BlockBasedTableBuilder will expose
compression error status if compression fails during the table building.
This commit adds fake faulting compressors and a unit test to test such
cases.
This check finds 5 bugs, and this commit also fixes them:
1. Not handling compression failure well in
BlockBasedTableBuilder::BGWorkWriteRawBlock.
2. verify_compression failing in BlockBasedTableBuilder when used with ZSTD.
3. Wrongly passing the same reference of block contents to
BlockBasedTableBuilder::CompressAndVerifyBlock in parallel compression.
4. Wrongly setting block_rep->first_key_in_next_block to nullptr in
BlockBasedTableBuilder::EnterUnbuffered when there are still incoming data
blocks.
5. Not maintaining variables for compression ratio estimation and first_block
in BlockBasedTableBuilder::EnterUnbuffered.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6709
Reviewed By: ajkr
Differential Revision: D21236254
fbshipit-source-id: 101f6e62b2bac2b7be72be198adf93cd32a1ff46
Summary:
Calculate ```IOOptions::timeout``` using ```ReadOptions::deadline``` and pass it to ```FileSystem::Read/FileSystem::MultiRead```. This allows us to impose a tighter bound on the time taken by Get/MultiGet on FileSystem/Envs that support IO timeouts. Even on those that don't support, check in ```RandomAccessFileReader::Read``` and ```MultiRead``` and return ```Status::TimedOut()``` if the deadline is exceeded.
For now, TableReader creation, which might do file opens and reads, are not covered. It will be implemented in another PR.
Tests:
Update existing unit tests to verify the correct timeout value is being passed
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6751
Reviewed By: riversand963
Differential Revision: D21285631
Pulled By: anand1976
fbshipit-source-id: d89af843e5a91ece866e87aa29438b52a65a8567
Summary:
An assertion that a char == a CompressionType (unsigned char)
originally cast from a char can fail if the original value is negative,
due to numeric promotion. The assertion should pass even if the value
is invalid CompressionType, because the callee
UncompressBlockContentsForCompressionType checks for that and reports
status appropriately.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6780
Test Plan:
Temporarily change kZSTD = 0x88 and see tests fail. Make this
change (in addition), and tests pass.
Reviewed By: siying
Differential Revision: D21328498
Pulled By: pdillinger
fbshipit-source-id: 61caf8d815581ce49261ecb7ab0f396e9ac4bb92
Summary:
In https://github.com/facebook/rocksdb/pull/6455, we modified the interface of `RandomAccessFileReader::Read` to be able to get rid of memcpy in direct IO mode.
This PR applies the new interface to `BlockFetcher` when reading blocks from SST files in direct IO mode.
Without this PR, in direct IO mode, when fetching and uncompressing compressed blocks, `BlockFetcher` will first copy the raw compressed block into `BlockFetcher::compressed_buf_` or `BlockFetcher::stack_buf_` inside `RandomAccessFileReader::Read` depending on the block size. then during uncompressing, it will copy the uncompressed block into `BlockFetcher::heap_buf_`.
In this PR, we get rid of the first memcpy and directly uncompress the block from `direct_io_buf_` to `heap_buf_`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6689
Test Plan: A new unit test `block_fetcher_test` is added.
Reviewed By: anand1976
Differential Revision: D21006729
Pulled By: cheng-chang
fbshipit-source-id: 2370b92c24075692423b81277415feb2aed5d980
Summary:
In direct IO mode, RandomAccessFileReader::Read allocates an internal aligned buffer, and then copies the result into the scratch buffer. If the result is only temporarily used inside a function, there is no need to do the memcpy and just let the result Slice refer to the internally allocated buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6455
Test Plan: make check
Differential Revision: D20106753
Pulled By: cheng-chang
fbshipit-source-id: 44f505843837bba47a56e3fa2c4dd3bd76486b58
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
For upcoming new SST filter implementations, we will use a new
64-bit hash function (XXH3 preview, slightly modified). This change
updates hash.{h,cc} for that change, adds unit tests, and out-of-lines
the implementations to keep hash.h as clean/small as possible.
In developing the unit tests, I discovered that the XXH3 preview always
returns zero for the empty string. Zero is problematic for some
algorithms (including an upcoming SST filter implementation) if it
occurs more often than at the "natural" rate, so it should not be
returned from trivial values using trivial seeds. I modified our fork
of XXH3 to return a modest hash of the seed for the empty string.
With hash function details out-of-lines in hash.h, it makes sense to
enable XXH_INLINE_ALL, so that direct calls to XXH64/XXH32/XXH3p
are inlined. To fix array-bounds warnings on some inline calls, I
injected some casts to uintptr_t in xxhash.cc. (Issue reported to Yann.)
Revised: Reverted using XXH_INLINE_ALL for now. Some Facebook
checks are unhappy about #include on xxhash.cc file. I would
fix that by rename to xxhash_cc.h, but to best preserve history I want
to do that in a separate commit (PR) from the uintptr casts.
Also updated filter_bench for this change, improving the performance
predictability of dry run hashing and adding support for 64-bit hash
(for upcoming new SST filter implementations, minor dead code in the
tool for now).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5984
Differential Revision: D18246567
Pulled By: pdillinger
fbshipit-source-id: 6162fbf6381d63c8cc611dd7ec70e1ddc883fbb8
Summary:
file_reader_writer.h and .cc contain several files and helper function, and it's hard to navigate. Separate it to multiple files and put them under file/
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5803
Test Plan: Build whole project using make and cmake.
Differential Revision: D17374550
fbshipit-source-id: 10efca907721e7a78ed25bbf74dc5410dea05987
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
Many logging related source files are under util/. It will be more structured if they are together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5387
Differential Revision: D15579036
Pulled By: siying
fbshipit-source-id: 3850134ed50b8c0bb40a0c8ae1f184fa4081303f
Summary:
Following files were run through automatic formatter:
db/db_impl.cc
db/db_impl.h
db/db_impl_compaction_flush.cc
db/db_impl_debug.cc
db/db_impl_files.cc
db/db_impl_readonly.h
db/db_impl_write.cc
db/dbformat.cc
db/dbformat.h
table/block.cc
table/block.h
table/block_based_filter_block.cc
table/block_based_filter_block.h
table/block_based_filter_block_test.cc
table/block_based_table_builder.cc
table/block_based_table_reader.cc
table/block_based_table_reader.h
table/block_builder.cc
table/block_builder.h
table/block_fetcher.cc
table/block_prefix_index.cc
table/block_prefix_index.h
table/block_test.cc
table/format.cc
table/format.h
I could easily run all the files, but I don't want people to feel that
I'm doing it for lines of code changes :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5114
Differential Revision: D14633040
Pulled By: siying
fbshipit-source-id: 3f346cb53bf21e8c10704400da548dfce1e89a52
Summary:
Right now, users can change statistics.stats_level while DB is running, but TSAN may report
data race. We make stats_level_ to be atomic, and access them using accessors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5030
Differential Revision: D14267519
Pulled By: siying
fbshipit-source-id: 37d7ebeff7a43a406230143422a16af899163f73
Summary:
Statistics cost too much CPU for some use cases. Add two stats levels
so that people can choose to skip two types of expensive stats, timers and
histograms.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5027
Differential Revision: D14252765
Pulled By: siying
fbshipit-source-id: 75ecec9eaa44c06118229df4f80c366115346592
Summary:
This is essentially a re-submission of #4251 with a few improvements:
- Split `CompressionDict` into two separate classes: `CompressionDict` and `UncompressionDict`
- Eliminated `Init` functions. Instead do all initialization work in constructors.
- Added test case for parallel DB open, which is the scenario where #4251 failed under TSAN.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4849
Differential Revision: D13606039
Pulled By: ajkr
fbshipit-source-id: 08c236059798c710db9cbf545fce0f371232d447
Summary:
We carry compression type and "cachable" variables for every block in the block cache, while they take well-known values. 8-byte is wasted for each block (2-byte for useful information but it takes 8 bytes because of padding). With this change, these two variables are removed.
The cachable information is only useful in the process of reading the block. We use other information to infer from it. For compressed blocks, the compression type is a part of the block content itself so we can get it from there.
Some code is slightly refactored so that the cachable information can flow better.
Another change is to only use class BlockContents for compressed block, and narrow the class Block to only be used for uncompressed blocks, including blocks in compressed block cache. This can make the Block class less confusing. It also saves tens of bytes for each block in compressed block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4650
Differential Revision: D12969070
Pulled By: siying
fbshipit-source-id: 548b62724e9eb66993026429fd9c7c3acd1f95ed
Summary:
Rename the interface, as it is mean to be a generic interface for memory allocation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4590
Differential Revision: D10866340
Pulled By: yiwu-arbug
fbshipit-source-id: 85cb753351a40cb856c046aeaa3f3b369eef3d16
Summary:
This is a conceptually simple change, but it touches many files to
pass the allocator through function calls.
We introduce CacheAllocator, which can be used by clients to configure
custom allocator for cache blocks. Our motivation is to hook this up
with folly's `JemallocNodumpAllocator`
(f43ce6d686/folly/experimental/JemallocNodumpAllocator.h),
but there are many other possible use cases.
Additionally, this commit cleans up memory allocation in
`util/compression.h`, making sure that all allocations are wrapped in a
unique_ptr as soon as possible.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4437
Differential Revision: D10132814
Pulled By: yiwu-arbug
fbshipit-source-id: be1343a4b69f6048df127939fea9bbc96969f564
Summary:
Value delta encoding in format_version 4 requires the differences between the size of two consecutive handles to be sent to BlockBuilder::Add. This applies not only to indexes on blocks but also the indexes on indexes and filters in partitioned indexes and filters respectively. The patch fixes a bug where the partitioned filters would encode the entire size of the handle rather than the difference of the size with the last size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4381
Differential Revision: D9879505
Pulled By: maysamyabandeh
fbshipit-source-id: 27a22e49b482b927fbd5629dc310c46d63d4b6d1
Summary:
Reverting is needed to unblock a user building against master, who is blocked for multiple days due to a thread-safety issue in `GetEmptyDict`. We haven't been able to fix it quickly, so reverting.
Simply ran `git revert 6c40806e51a89386d2b066fddf73d3fd03a36f65`. There were no merge conflicts.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4347
Differential Revision: D9668365
Pulled By: ajkr
fbshipit-source-id: 0c56334f0a23cf5ee0233d4e4679eae6709739cd
Summary:
In RocksDB, for a given SST file, all data blocks are compressed with the same dictionary. When we compress a block using the dictionary's raw bytes, the compression library first has to digest the dictionary to get it into a usable form. This digestion work is redundant and ideally should be done once per file.
ZSTD offers APIs for the caller to create and reuse a digested dictionary object (`ZSTD_CDict`). In this PR, we call `ZSTD_createCDict` once per file to digest the raw bytes. Then we use `ZSTD_compress_usingCDict` to compress each data block using the pre-digested dictionary. Once the file's created `ZSTD_freeCDict` releases the resources held by the digested dictionary.
There are a couple other changes included in this PR:
- Changed the parameter object for (un)compression functions from `CompressionContext`/`UncompressionContext` to `CompressionInfo`/`UncompressionInfo`. This avoids the previous pattern, where `CompressionContext`/`UncompressionContext` had to be mutated before calling a (un)compression function depending on whether dictionary should be used. I felt that mutation was error-prone so eliminated it.
- Added support for digested uncompression dictionaries (`ZSTD_DDict`) as well. However, this PR does not support reusing them across uncompression calls for the same file. That work is deferred to a later PR when we will store the `ZSTD_DDict` objects in block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4251
Differential Revision: D9257078
Pulled By: ajkr
fbshipit-source-id: 21b8cb6bbdd48e459f1c62343780ab66c0a64438
Summary:
Given that index value is a BlockHandle, which is basically an <offset, size> pair we can apply delta encoding on the values. The first value at each index restart interval encoded the full BlockHandle but the rest encode only the size. Refer to IndexBlockIter::DecodeCurrentValue for the detail of the encoding. This reduces the index size which helps using the block cache more efficiently. The feature is enabled with using format_version 4.
The feature comes with a bit of cpu overhead which should be paid back by the higher cache hits due to smaller index block size.
Results with sysbench read-only using 4k blocks and using 16 index restart interval:
Format 2:
19585 rocksdb read-only range=100
Format 3:
19569 rocksdb read-only range=100
Format 4:
19352 rocksdb read-only range=100
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3983
Differential Revision: D8361343
Pulled By: maysamyabandeh
fbshipit-source-id: f882ee082322acac32b0072e2bdbb0b5f854e651
Summary:
PR https://github.com/facebook/rocksdb/pull/3838 made some changes that triggers lint warnings.
Run `make format` to fix formatting as suggested by siying .
Also piggyback two changes:
1) fix singleton destruction order for windows and posix env
2) fix two clang warnings
Closes https://github.com/facebook/rocksdb/pull/3954
Differential Revision: D8272041
Pulled By: miasantreble
fbshipit-source-id: 7c4fd12bd17aac13534520de0c733328aa3c6c9f
Summary:
Windows does not have LD_PRELOAD mechanism to override all memory allocation functions and ZSTD makes use of C-tuntime calloc. During flushes and compactions default system allocator fragments and the system slows down considerably.
For builds with jemalloc we employ an advanced ZSTD context creation API that re-directs memory allocation to jemalloc. To reduce the cost of context creation on each block we cache ZSTD context within the block based table builder while a new SST file is being built, this will help all platform builds including those w/o jemalloc. This avoids system allocator fragmentation and improves the performance.
The change does not address random reads and currently on Windows reads with ZSTD regress as compared with SNAPPY compression.
Closes https://github.com/facebook/rocksdb/pull/3838
Differential Revision: D8229794
Pulled By: miasantreble
fbshipit-source-id: 719b622ab7bf4109819bc44f45ec66f0dd3ee80d
Summary:
- removed a few unneeded variables
- fused some variable declarations and their assignments
- fixed right-trimming code in string_util.cc to not underflow
- simplifed an assertion
- move non-nullptr check assertion before dereferencing of that pointer
- pass an std::string function parameter by const reference instead of by value (avoiding potential copy)
Closes https://github.com/facebook/rocksdb/pull/3507
Differential Revision: D7004679
Pulled By: sagar0
fbshipit-source-id: 52944952d9b56dfcac3bea3cd7878e315bb563c4
Summary:
NUMBER_BLOCK_DECOMPRESSED and NUMBER_BLOCK_COMPRESSED are not reported unless the stats level contain detailed timers, which is wrong. They are normal counters. Fix it.
Closes https://github.com/facebook/rocksdb/pull/3263
Differential Revision: D6552519
Pulled By: siying
fbshipit-source-id: 40899ccea7b2856bb39752616657c0bfd432f6f9
Summary:
Divide ReadBlockContents() to multiple sub-functions. Maintaining the input and intermediate data in a new class BlockFetcher.
I hope in general it makes the code easier to maintain.
Another motivation to do it is to clearly divide the logic before file reading and after file reading. The refactor will help us evaluate how can we make I/O async in the future.
Closes https://github.com/facebook/rocksdb/pull/3244
Differential Revision: D6520983
Pulled By: siying
fbshipit-source-id: 338d90bc0338472d46be7a7682028dc9114b12e9
Summary:
store a zero as the checksum when disabled since it's easier to keep block trailer a fixed length.
Closes https://github.com/facebook/rocksdb/pull/2781
Differential Revision: D5694702
Pulled By: ajkr
fbshipit-source-id: 69cea9da415778ba2b600dfd9d0dfc8cb5188ecd
Summary:
Right now, if direct I/O is enabled, prefetching the last 512KB cannot be applied, except compaction inputs or readahead is enabled for iterators. This can create a lot of I/O for HDD cases. To solve the problem, the 512KB is prefetched in block based table if direct I/O is enabled. The prefetched buffer is passed in totegher with random access file reader, so that we try to read from the buffer before reading from the file. This can be extended in the future to support flexible user iterator readahead too.
Closes https://github.com/facebook/rocksdb/pull/2708
Differential Revision: D5593091
Pulled By: siying
fbshipit-source-id: ee36ff6d8af11c312a2622272b21957a7b5c81e7
Summary:
We've got some DBs where iterators return Status with message "Corruption: block checksum mismatch" all the time. That's not very informative. It would be much easier to investigate if the error message contained the file name - then we would know e.g. how old the corrupted file is, which would be very useful for finding the root cause. This PR adds file name, offset and other stuff to some block corruption-related status messages.
It doesn't improve all the error messages, just a few that were easy to improve. I'm mostly interested in "block checksum mismatch" and "Bad table magic number" since they're the only corruption errors that I've ever seen in the wild.
Closes https://github.com/facebook/rocksdb/pull/2507
Differential Revision: D5345702
Pulled By: al13n321
fbshipit-source-id: fc8023d43f1935ad927cef1b9c55481ab3cb1339
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
Summary:
This handles two issues: (1) range deletion iterator sometimes outlives
the table reader that created it, in which case the block must not be destroyed
during table reader destruction; and (2) we prefer to read these range tombstone
meta-blocks from file fewer times.
- Extracted cache-populating logic from NewDataBlockIterator() into a separate function: MaybeLoadDataBlockToCache()
- Use MaybeLoadDataBlockToCache() to load range deletion meta-block and pin it through the reader's lifetime. This code reuse works since range deletion meta-block has same format as data blocks.
- Use NewDataBlockIterator() to create range deletion iterators, which uses block cache if enabled, otherwise reads the block from file. Either way, the underlying block won't disappear until after the iterator is destroyed.
Closes https://github.com/facebook/rocksdb/pull/1459
Differential Revision: D4123175
Pulled By: ajkr
fbshipit-source-id: 8f64281
ricky