Summary:
For write-prepared/write-unprepared transactions,
GetCommitTimeWriteBatch() can be used only if the transaction is started
with `TransactionOptions::use_only_the_last_commit_time_batch_for_recovery` set
to true. Otherwise, it is possible that multiple uncommitted versions of the
same key exist in the database. During bottommost compaction, RocksDB may
set the sequence numbers of both to zero once they become committed, causing
output SST file to have two identical internal keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9794
Test Plan:
make check
pay special attention to the following
```
transaction_test --gtest_filter=MySQLStyleTransactionTest/MySQLStyleTransactionTest.TransactionStressTest/*
```
Reviewed By: lth
Differential Revision: D35327214
Pulled By: riversand963
fbshipit-source-id: 3bae00a28359c10e96e4c6f676d20de5610d8a0f
Summary:
If FilePrefetchBuffer object is destroyed and then later Poll() calls callback on object which has been destroyed, it gives segfault on accessing destroyed object. It was caught after adding unit tests that tests Posix implementation of ReadAsync and Poll APIs.
This PR also updates and fixes existing IOURing tests which were not running locally because RocksDbIOUringEnable function wasn't defined and IOUring was disabled for those tests
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9777
Test Plan: Added new unit test
Reviewed By: anand1976
Differential Revision: D35254002
Pulled By: akankshamahajan15
fbshipit-source-id: 68e80054ffb14ae25c255920ebc6548ca5f130a1
Summary:
min_log_number_to_keep denotes that the WALs whose numbers are below
this value **will** be deleted by RocksDB.
delete_wals_before will be used by RocksDB if
track_and_verify_wals_in_manifest is set to true. During recovery,
RocksDB uses the info encoded in delete_wals_before to reconstruct its
knowledge about what WALs to expect existing.
If these two tags are not encoded in the same VersionEdit, then it's
possible for min_log_number_to_keep=100 to exist, but
delete_wals_before=100 to be lost due to power failure. Subsequent
recovery will delete 99.log. If the db crashes again, the following
recovery will expect to see 99.log since there is no
delete_wals_before=100 in the MANIFEST, but the WAL is already deleted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9766
Test Plan:
First of all, make check.
Second, format compatibility.
SHORT_TEST=1 ./tools/check_format_compatible.sh
Reviewed By: ltamasi
Differential Revision: D35203623
Pulled By: riversand963
fbshipit-source-id: 45623fc4b4b50d299d5e0f9559a3a4c5e9522c8f
Summary:
In making `SstFileMetaData` inherit from `FileStorageInfo`, I
overlooked setting some `FileStorageInfo` fields when then default
`SstFileMetaData()` ctor is used. This affected `GetLiveFilesMetaData()`.
Also removed some buggy `static_cast<size_t>`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9769
Test Plan: Updated tests
Reviewed By: jay-zhuang
Differential Revision: D35220383
Pulled By: pdillinger
fbshipit-source-id: 05b4ee468258dbd3699517e1124838bf405fe7f8
Summary:
After commit [d642c60](d642c60bdc), the stats `READ_BLOCK_COMPACTION_MICROS` cannot record any compaction read duration, and it always report zero.
This PR targets to distinguish `READ_BLOCK_COMPACTION_MICROS` with `READ_BLOCK_GET_MICROS` so that `READ_BLOCK_COMPACTION_MICROS` could record the correct stats.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9722
Reviewed By: ajkr
Differential Revision: D35021870
Pulled By: jay-zhuang
fbshipit-source-id: f1a804994265e51465de64c2a08f2e0eeb6fc5a3
Summary:
Although ColumnFamilySet comments say that DB mutex can be
freed during iteration, as long as you hold a ref while releasing DB
mutex, this is not quite true because UnrefAndTryDelete might delete cfd
right before it is needed to get ->next_ for the next iteration of the
loop.
This change solves the problem by making a wrapper class that makes such
iteration easier while handling the tricky details of UnrefAndTryDelete
on the previous cfd only after getting next_ in operator++.
FreeDeadColumnFamilies should already have been obsolete; this removes
it for good. Similarly, ColumnFamilySet::iterator doesn't need to check
for cfd with 0 refs, because those are immediately deleted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9730
Test Plan:
was reported with ASAN on unit tests like
DBLogicalBlockSizeCacheTest.CreateColumnFamily (very rare); keep watching
Reviewed By: ltamasi
Differential Revision: D35038143
Pulled By: pdillinger
fbshipit-source-id: 0a5478d5be96c135343a00603711b7df43ae19c9
Summary:
This updates main branch with a HISTORY update going into
7.1.fb branch before tagging 7.1.0.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9746
Test Plan: HISTORY.md only
Reviewed By: ajkr, hx235
Differential Revision: D35099194
Pulled By: pdillinger
fbshipit-source-id: b74ea8b626118dac235e387038420829850b8da2
Summary:
There is a race condition if WAL tracking in the MANIFEST is enabled in a database that disables 2PC.
The race condition is between two background flush threads trying to install flush results to the MANIFEST.
Consider an example database with two column families: "default" (cfd0) and "cf1" (cfd1). Initially,
both column families have one mutable (active) memtable whose data backed by 6.log.
1. Trigger a manual flush for "cf1", creating a 7.log
2. Insert another key to "default", and trigger flush for "default", creating 8.log
3. BgFlushThread1 finishes writing 9.sst
4. BgFlushThread2 finishes writing 10.sst
```
Time BgFlushThread1 BgFlushThread2
| mutex_.Lock()
| precompute min_wal_to_keep as 6
| mutex_.Unlock()
| mutex_.Lock()
| precompute min_wal_to_keep as 6
| join MANIFEST write queue and mutex_.Unlock()
| write to MANIFEST
| mutex_.Lock()
| cfd1->log_number = 7
| Signal bg_flush_2 and mutex_.Unlock()
| wake up and mutex_.Lock()
| cfd0->log_number = 8
| FindObsoleteFiles() with job_context->log_number == 7
| mutex_.Unlock()
| PurgeObsoleteFiles() deletes 6.log
V
```
As shown in the above, BgFlushThread2 thinks that the min wal to keep is 6.log because "cf1" has unflushed data in 6.log (cf1.log_number=6).
Similarly, BgThread1 thinks that min wal to keep is also 6.log because "default" has unflushed data (default.log_number=6).
No WAL deletion will be written to MANIFEST because 6 is equal to `versions_->wals_.min_wal_number_to_keep`,
due to https://github.com/facebook/rocksdb/blob/7.1.fb/db/memtable_list.cc#L513:L514.
The bg flush thread that finishes last will perform file purging. `job_context.log_number` will be evaluated as 7, i.e.
the min wal that contains unflushed data, causing 6.log to be deleted. However, MANIFEST thinks 6.log should still exist.
If you close the db at this point, you won't be able to re-open it if `track_and_verify_wal_in_manifest` is true.
We must handle the case of multiple bg flush threads, and it is difficult for one bg flush thread to know
the correct min wal number until the other bg flush threads have finished committing to the manifest and updated
the `cfd::log_number`.
To fix this issue, we rename an existing variable `min_log_number_to_keep_2pc` to `min_log_number_to_keep`,
and use it to track WAL file deletion in non-2pc mode as well.
This variable is updated only 1) during recovery with mutex held, or 2) in the MANIFEST write thread.
`min_log_number_to_keep` means RocksDB will delete WALs below it, although there may be WALs
above it which are also obsolete. Formally, we will have [min_wal_to_keep, max_obsolete_wal]. During recovery, we
make sure that only WALs above max_obsolete_wal are checked and added back to `alive_log_files_`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9715
Test Plan:
```
make check
```
Also ran stress test below (with asan) to make sure it completes successfully.
```
TEST_TMPDIR=/dev/shm/rocksdb OPT=-g ASAN_OPTIONS=disable_coredump=0 \
CRASH_TEST_EXT_ARGS=--compression_type=zstd SKIP_FORMAT_BUCK_CHECKS=1 \
make J=52 -j52 blackbox_asan_crash_test
```
Reviewed By: ltamasi
Differential Revision: D34984412
Pulled By: riversand963
fbshipit-source-id: c7b21a8d84751bb55ea79c9f387103d21b231005
Summary:
Bloom filters generated by pre-7.0 releases are not read by
7.0.x releases (and vice-versa) due to changes to FilterPolicy::Name()
in https://github.com/facebook/rocksdb/issues/9590. This can severely impact read performance and read I/O on
upgrade or downgrade with existing DB, but not data correctness.
To fix, we go back using the old, unified name in SST metadata but (for
a while anyway) recognize the aliases that could be generated by early
7.0.x releases. This unfortunately requires a public API change to avoid
interfering with all the good changes from https://github.com/facebook/rocksdb/issues/9590, but the API change
only affects users with custom FilterPolicy, which should be very few.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9736
Test Plan:
manual
Generate DBs with
```
./db_bench.7.0 -db=/dev/shm/rocksdb.7.0 -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=fillrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0
```
and similar. Compare with
```
for IMPL in 6.29 7.0 fixed; do for DB in 6.29 7.0 fixed; do echo "Testing $IMPL on $DB:"; ./db_bench.$IMPL -db=/dev/shm/rocksdb.$DB -use_existing_db -readonly -bloom_bits=10 -benchmarks=readrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -duration=10 2>&1 | grep micros/op; done; done
```
Results:
```
Testing 6.29 on 6.29:
readrandom : 34.381 micros/op 29085 ops/sec; 3.2 MB/s (291999 of 291999 found)
Testing 6.29 on 7.0:
readrandom : 190.443 micros/op 5249 ops/sec; 0.6 MB/s (52999 of 52999 found)
Testing 6.29 on fixed:
readrandom : 40.148 micros/op 24907 ops/sec; 2.8 MB/s (249999 of 249999 found)
Testing 7.0 on 6.29:
readrandom : 229.430 micros/op 4357 ops/sec; 0.5 MB/s (43999 of 43999 found)
Testing 7.0 on 7.0:
readrandom : 33.348 micros/op 29986 ops/sec; 3.3 MB/s (299999 of 299999 found)
Testing 7.0 on fixed:
readrandom : 152.734 micros/op 6546 ops/sec; 0.7 MB/s (65999 of 65999 found)
Testing fixed on 6.29:
readrandom : 32.024 micros/op 31224 ops/sec; 3.5 MB/s (312999 of 312999 found)
Testing fixed on 7.0:
readrandom : 33.990 micros/op 29390 ops/sec; 3.3 MB/s (294999 of 294999 found)
Testing fixed on fixed:
readrandom : 28.714 micros/op 34825 ops/sec; 3.9 MB/s (348999 of 348999 found)
```
Just paying attention to order of magnitude of ops/sec (short test
durations, lots of noise), it's clear that with the fix we can read <= 6.29
& >= 7.0 at full speed, where neither 6.29 nor 7.0 can on both. And 6.29
release can properly read fixed DB at full speed.
Reviewed By: siying, ajkr
Differential Revision: D35057844
Pulled By: pdillinger
fbshipit-source-id: a46893a6af4bf084375ebe4728066d00eb08f050
Summary:
In FilePrefetchBuffer if reads are sequential, after prefetching call ReadAsync API to prefetch data asynchronously so that in next prefetching data will be available. Data prefetched asynchronously will be readahead_size/2. It uses two buffers, one for synchronous prefetching and one for asynchronous. In case, the data is overlapping, the data is copied from both buffers to third buffer to make it continuous.
This feature is under ReadOptions::async_io and is under experimental.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9674
Test Plan:
1. Add new unit tests
2. Run **db_stress** to make sure nothing crashes.
- Normal prefetch without `async_io` ran successfully:
```
export CRASH_TEST_EXT_ARGS=" --async_io=0"
make crash_test -j
```
3. **Run Regressions**.
i) Main branch without any change for normal prefetching with async_io disabled:
```
./db_bench -db=/tmp/prefix_scan_prefetch_main -benchmarks="fillseq" -key_size=32 -value_size=512 -num=5000000 -
use_direct_io_for_flush_and_compaction=true -target_file_size_base=16777216
```
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.0
Date: Thu Mar 17 13:11:34 2022
CPU: 24 * Intel Core Processor (Broadwell)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_main]
seekrandom : 483618.390 micros/op 2 ops/sec; 338.9 MB/s (249 of 249 found)
```
ii) normal prefetching after changes with async_io disable:
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_withchange -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.0
Date: Thu Mar 17 14:11:31 2022
CPU: 24 * Intel Core Processor (Broadwell)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_withchange]
seekrandom : 471347.227 micros/op 2 ops/sec; 348.1 MB/s (255 of 255 found)
```
Reviewed By: anand1976
Differential Revision: D34731543
Pulled By: akankshamahajan15
fbshipit-source-id: 8e23aa93453d5fe3c672b9231ad582f60207937f
Summary:
The goal of this change is to allow changes to the "current" (in
FileSystem) file temperatures to feed back into DB metadata, so that
they can inform decisions and stats reporting. In part because of
modular code factoring, it doesn't seem easy to do this automagically,
where opening an SST file and observing current Temperature different
from expected would trigger a change in metadata and DB manifest write
(essentially giving the deep read path access to the write path). It is also
difficult to do this while the DB is open because of the limitations of
LogAndApply.
This change allows updating file temperature metadata on a closed DB
using an experimental utility function UpdateManifestForFilesState()
or `ldb update_manifest --update_temperatures`. This should suffice for
"migration" scenarios where outside tooling has placed or re-arranged DB
files into a (different) tiered configuration without going through
RocksDB itself (currently, only compaction can change temperature
metadata).
Some details:
* Refactored and added unit test for `ldb unsafe_remove_sst_file` because
of shared functionality
* Pulled in autovector.h changes from https://github.com/facebook/rocksdb/issues/9546 to fix SuperVersionContext
move constructor (related to an older draft of this change)
Possible follow-up work:
* Support updating manifest with file checksums, such as when a
new checksum function is used and want existing DB metadata updated
for it.
* It's possible that for some repair scenarios, lighter weight than
full repair, we might want to support UpdateManifestForFilesState() to
modify critical file details like size or checksum using same
algorithm. But let's make sure these are differentiated from modifying
file details in ways that don't suspect corruption (or require extreme
trust).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9683
Test Plan: unit tests added
Reviewed By: jay-zhuang
Differential Revision: D34798828
Pulled By: pdillinger
fbshipit-source-id: cfd83e8fb10761d8c9e7f9c020d68c9106a95554
Summary:
Fix and enhance the background error recovery logic to handle the
following situations -
1. Background read errors during flush/compaction (previously was
resulting in unrecoverable state)
2. Fix auto recovery failure on read/write errors during atomic flush.
It was failing due to a bug in setting the resuming_from_bg_err variable
in AtomicFlushMemTablesToOutputFiles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9679
Test Plan: Add new unit tests in error_handler_fs_test
Reviewed By: riversand963
Differential Revision: D34770097
Pulled By: anand1976
fbshipit-source-id: 136da973a28d684b9c74bdf668519b0cbbbe1742
Summary:
In https://github.com/facebook/rocksdb/issues/9659, when `DisableManualCompaction()` is issued, the foreground
manual compaction thread does not have to wait background compaction
thread to finish. Which could be a problem that the user re-enable
manual compaction with `EnableManualCompaction()`, it may re-enable the
BG compaction which supposed be cancelled.
This patch makes the FG compaction wait on
`manual_compaction_state.done`, which either be set by BG compaction or
Unschedule callback. Then when FG manual compaction thread returns, it
should not have BG compaction running. So shared_ptr is no longer needed
for `manual_compaction_state`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9694
Test Plan: a StressTest and unittest
Reviewed By: ajkr
Differential Revision: D34885472
Pulled By: jay-zhuang
fbshipit-source-id: e6476175b43e8c59cd49f5c09241036a0716c274
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9686
According to https://www.cplusplus.com/reference/deque/deque/back/,
"
The container is accessed (neither the const nor the non-const versions modify the container).
The last element is potentially accessed or modified by the caller. Concurrently accessing or modifying other elements is safe.
"
Also according to https://www.cplusplus.com/reference/deque/deque/pop_front/,
"
The container is modified.
The first element is modified. Concurrently accessing or modifying other elements is safe (although see iterator validity above).
"
In RocksDB, we never pop the last element of `DBImpl::alive_log_files_`. We have been
exploiting this fact and the above two properties when ensuring correctness when
`DBImpl::alive_log_files_` may be accessed concurrently. Specifically, it can be accessed
in the write path when db mutex is released. Sometimes, the log_mute_ is held. It can also be accessed in `FindObsoleteFiles()`
when db mutex is always held. It can also be accessed
during recovery when db mutex is also held.
Given the fact that we never pop the last element of alive_log_files_, we currently do not
acquire additional locks when accessing it in `WriteToWAL()` as follows
```
alive_log_files_.back().AddSize(log_entry.size());
```
This is problematic.
Check source code of deque.h
```
back() _GLIBCXX_NOEXCEPT
{
__glibcxx_requires_nonempty();
...
}
pop_front() _GLIBCXX_NOEXCEPT
{
...
if (this->_M_impl._M_start._M_cur
!= this->_M_impl._M_start._M_last - 1)
{
...
++this->_M_impl._M_start._M_cur;
}
...
}
```
`back()` will actually call `__glibcxx_requires_nonempty()` first.
If `__glibcxx_requires_nonempty()` is enabled and not an empty macro,
it will call `empty()`
```
bool empty() {
return this->_M_impl._M_finish == this->_M_impl._M_start;
}
```
You can see that it will access `this->_M_impl._M_start`, racing with `pop_front()`.
Therefore, TSAN will actually catch the bug in this case.
To be able to use TSAN on our library and unit tests, we should always coordinate
concurrent accesses to STL containers properly.
We need to pass information about db mutex and log mutex into `WriteToWAL()`, otherwise
it's impossible to know which mutex to acquire inside the function.
To fix this, we can catch the tail of `alive_log_files_` by reference, so that we do not have to call `back()` in `WriteToWAL()`.
Reviewed By: pdillinger
Differential Revision: D34780309
fbshipit-source-id: 1def9821f0c437f2736c6a26445d75890377889b
Summary:
https://github.com/facebook/rocksdb/issues/9625 didn't change the unschedule condition which was waiting for the background thread to clean-up the compaction.
make sure we only unschedule the task when it's scheduled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9659
Reviewed By: ajkr
Differential Revision: D34651820
Pulled By: jay-zhuang
fbshipit-source-id: 23f42081b15ec8886cd81cbf131b116e0c74dc2f
Summary:
As disscussed in (https://github.com/facebook/rocksdb/issues/9223), Here added a new API named DB::OpenAndTrimHistory, this API will open DB and trim data to the timestamp specofied by **trim_ts** (The data with newer timestamp than specified trim bound will be removed). This API should only be used at a timestamp-enabled db instance recovery.
And this PR implemented a new iterator named HistoryTrimmingIterator to support trimming history with a new API named DB::OpenAndTrimHistory. HistoryTrimmingIterator wrapped around the underlying InternalITerator such that keys whose timestamps newer than **trim_ts** should not be returned to the compaction iterator while **trim_ts** is not null.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9410
Reviewed By: ltamasi
Differential Revision: D34410207
Pulled By: riversand963
fbshipit-source-id: e54049dc234eccd673244c566b15df58df5a6236
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9629
Pessimistic transactions use pessimistic concurrency control, i.e. locking. Keys are
locked upon first operation that writes the key or has the intention of writing. For example,
`PessimisticTransaction::Put()`, `PessimisticTransaction::Delete()`,
`PessimisticTransaction::SingleDelete()` will write to or delete a key, while
`PessimisticTransaction::GetForUpdate()` is used by application to indicate
to RocksDB that the transaction has the intention of performing write operation later
in the same transaction.
Pessimistic transactions support two-phase commit (2PC). A transaction can be
`Prepared()`'ed and then `Commit()`. The prepare phase is similar to a promise: once
`Prepare()` succeeds, the transaction has acquired the necessary resources to commit.
The resources include locks, persistence of WAL, etc.
Write-committed transaction is the default pessimistic transaction implementation. In
RocksDB write-committed transaction, `Prepare()` will write data to the WAL as a prepare
section. `Commit()` will write a commit marker to the WAL and then write data to the
memtables. While writing to the memtables, different keys in the transaction's write batch
will be assigned different sequence numbers in ascending order.
Until commit/rollback, the transaction holds locks on the keys so that no other transaction
can write to the same keys. Furthermore, the keys' sequence numbers represent the order
in which they are committed and should be made visible. This is convenient for us to
implement support for user-defined timestamps.
Since column families with and without timestamps can co-exist in the same database,
a transaction may or may not involve timestamps. Based on this observation, we add two
optional members to each `PessimisticTransaction`, `read_timestamp_` and
`commit_timestamp_`. If no key in the transaction's write batch has timestamp, then
setting these two variables do not have any effect. For the rest of this commit, we discuss
only the cases when these two variables are meaningful.
read_timestamp_ is used mainly for validation, and should be set before first call to
`GetForUpdate()`. Otherwise, the latter will return non-ok status. `GetForUpdate()` calls
`TryLock()` that can verify if another transaction has written the same key since
`read_timestamp_` till this call to `GetForUpdate()`. If another transaction has indeed
written the same key, then validation fails, and RocksDB allows this transaction to
refine `read_timestamp_` by increasing it. Note that a transaction can still use `Get()`
with a different timestamp to read, but the result of the read should not be used to
determine data that will be written later.
commit_timestamp_ must be set after finishing writing and before transaction commit.
This applies to both 2PC and non-2PC cases. In the case of 2PC, it's usually set after
prepare phase succeeds.
We currently require that the commit timestamp be chosen after all keys are locked. This
means we disallow the `TransactionDB`-level APIs if user-defined timestamp is used
by the transaction. Specifically, calling `PessimisticTransactionDB::Put()`,
`PessimisticTransactionDB::Delete()`, `PessimisticTransactionDB::SingleDelete()`,
etc. will return non-ok status because they specify timestamps before locking the keys.
Users are also prompted to use the `Transaction` APIs when they receive the non-ok status.
Reviewed By: ltamasi
Differential Revision: D31822445
fbshipit-source-id: b82abf8e230216dc89cc519564a588224a88fd43
Summary:
- Make `compression_per_level` dynamical changeable with `SetOptions`;
- Fix a bug that `compression_per_level` is not used for flush;
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9658
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D34700749
Pulled By: jay-zhuang
fbshipit-source-id: a23b9dfa7ad03d393c1d71781d19e91de796f49c
Summary:
**Context/Summary:**
As requested, `BlockBasedTableOptions::detect_filter_construct_corruption` can now be dynamically configured using `DB::SetOptions` after this PR
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9654
Test Plan: - New unit test
Reviewed By: pdillinger
Differential Revision: D34622609
Pulled By: hx235
fbshipit-source-id: c06773ef3d029e6bf1724d3a72dffd37a8ec66d9
Summary:
This bug affects use cases that meet the following conditions
- (has only the default column family or disables WAL) and
- has at least one event listener
- atomic flush is NOT affected.
If the above conditions meet, then RocksDB can release the db mutex before picking all the
existing memtables to flush. In the meantime, a snapshot can be created and db's sequence
number can still be incremented. The upcoming flush will ignore this snapshot.
A later read using this snapshot can return incorrect result.
To fix this issue, we call the listeners callbacks after picking the memtables so that we avoid
creating snapshots during this interval.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9648
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D34555456
Pulled By: riversand963
fbshipit-source-id: 1438981e9f069a5916686b1a0ad7627f734cf0ee
Summary:
PR https://github.com/facebook/rocksdb/issues/9557 introduced a race condition between manual compaction
foreground thread and background compaction thread.
This PR adds the ability to really unschedule manual compaction from
thread-pool queue by differentiate tag name for manual compaction and
other tasks.
Also fix an issue that db `close()` didn't cancel the manual compaction thread.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9625
Test Plan: unittest not hang
Reviewed By: ajkr
Differential Revision: D34410811
Pulled By: jay-zhuang
fbshipit-source-id: cb14065eabb8cf1345fa042b5652d4f788c0c40c
Summary:
BlockBasedTableOptions.hash_index_allow_collision is already deprecated and has no effect. Delete it for preparing 7.0 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9454
Test Plan: Run all existing tests.
Reviewed By: ajkr
Differential Revision: D33805827
fbshipit-source-id: ed8a436d1d083173ec6aef2a762ba02e1eefdc9d
Summary:
**Context:**
As part of https://github.com/facebook/rocksdb/pull/6949, file deletion is disabled for faulty database on the IOError of MANIFEST write/sync and [re-enabled again during `DBImpl::Resume()` if all recovery is completed](e66199d848 (diff-d9341fbe2a5d4089b93b22c5ed7f666bc311b378c26d0786f4b50c290e460187R396)). Before re-enabling file deletion, it `assert(versions_->io_status().ok());`, which IMO assumes `versions_` is **the** `version_` in the recovery process.
However, this is not necessarily true due to `s = error_handler_.ClearBGError();` happening before that assertion can unblock some foreground thread by [`EventHelpers::NotifyOnErrorRecoveryEnd()`](3122cb4358/db/error_handler.cc (L552-L553)) as part of the `ClearBGError()`. That foreground thread can do whatever it wants including closing/reopening the db and clean up that same `versions_`.
As a consequence, `assert(versions_->io_status().ok());`, will access `io_status()` of a nullptr and test like `DBErrorHandlingFSTest.MultiCFWALWriteError` becomes flaky. The unblocked foreground thread (in this case, the testing thread) proceeds to [reopen the db](https://github.com/facebook/rocksdb/blob/6.29.fb/db/error_handler_fs_test.cc?fbclid=IwAR1kQOxSbTUmaHQPAGz5jdMHXtDsDFKiFl8rifX-vIz4B23Y0S9jBkssSCg#L1494), where [`versions_` gets reset to nullptr](https://github.com/facebook/rocksdb/blob/6.29.fb/db/db_impl/db_impl.cc?fbclid=IwAR2uRhwBiPKgmE9q_6CM2mzbfwjoRgsGpXOrHruSJUDcAKc9rYZtVSvKdOY#L678) as part of the old db clean-up. If this happens right before `assert(versions_->io_status().ok()); ` gets excuted in the background thread, then we can see error like
```
db/db_impl/db_impl.cc:420:5: runtime error: member call on null pointer of type 'rocksdb::VersionSet'
assert(versions_->io_status().ok());
```
**Summary:**
- I proposed to call `s = error_handler_.ClearBGError();` after we know it's fine to wake up foreground, which I think is right before we LOG `ROCKS_LOG_INFO(immutable_db_options_.info_log, "Successfully resumed DB");`
- As the context, the orignal https://github.com/facebook/rocksdb/pull/3997 introducing `DBImpl::Resume()` calls `s = error_handler_.ClearBGError();` very close to calling `ROCKS_LOG_INFO(immutable_db_options_.info_log, "Successfully resumed DB");` while the later https://github.com/facebook/rocksdb/pull/6949 distances these two calls a bit.
- And it seems fine to me that `s = error_handler_.ClearBGError();` happens after `EnableFileDeletions(/*force=*/true);` at least syntax-wise since these two functions are orthogonal. And it also seems okay to me that we re-enable file deletion before `s = error_handler_.ClearBGError();`, which basically is resetting some state variables.
- In addition, to preserve the previous behavior of https://github.com/facebook/rocksdb/pull/6949 where status of re-enabling file deletion is not taken account into the general status of resuming the db, I separated `enable_file_deletion_s` from the general `s`
- In addition, to make `ROCKS_LOG_INFO(immutable_db_options_.info_log, "Successfully resumed DB");` more clear, I separated it into its own if-block.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9496
Test Plan:
- Manually reproduce the assertion failure in`DBErrorHandlingFSTest.MultiCFWALWriteError` by injecting sleep like below so that it's more likely for `assert(versions_->io_status().ok());` to execute after [reopening the db](https://github.com/facebook/rocksdb/blob/6.29.fb/db/error_handler_fs_test.cc?fbclid=IwAR1kQOxSbTUmaHQPAGz5jdMHXtDsDFKiFl8rifX-vIz4B23Y0S9jBkssSCg#L1494) in the foreground (i.e, testing) thread
```
sleep(1);
assert(versions_->io_status().ok());
```
`python3 gtest-parallel/gtest_parallel.py -r 100 -w 100 rocksdb/error_handler_fs_test --gtest_filter=DBErrorHandlingFSTest.MultiCFWALWriteError`
```
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from DBErrorHandlingFSTest
[ RUN ] DBErrorHandlingFSTest.MultiCFWALWriteError
Received signal 11 (Segmentation fault)
#0 rocksdb/error_handler_fs_test() [0x5818a4] rocksdb::DBImpl::ResumeImpl(rocksdb::DBRecoverContext) /data/users/huixiao/rocksdb/db/db_impl/db_impl.cc:421
https://github.com/facebook/rocksdb/issues/1 rocksdb/error_handler_fs_test() [0x6379ff] rocksdb::ErrorHandler::RecoverFromBGError(bool) /data/users/huixiao/rocksdb/db/error_handler.cc:600
https://github.com/facebook/rocksdb/issues/2 rocksdb/error_handler_fs_test() [0x7c5362] rocksdb::SstFileManagerImpl::ClearError() /data/users/huixiao/rocksdb/file/sst_file_manager_impl.cc:310
https://github.com/facebook/rocksdb/issues/3 rocksdb/error_handler_fs_test()
```
- The assertion failure does not happen with PR
`python3 gtest-parallel/gtest_parallel.py -r 100 -w 100 rocksdb/error_handler_fs_test --gtest_filter=DBErrorHandlingFSTest.MultiCFWALWriteError`
`[100/100] DBErrorHandlingFSTest.MultiCFWALWriteError (43785 ms) `
Reviewed By: riversand963, anand1976
Differential Revision: D33990099
Pulled By: hx235
fbshipit-source-id: 2e0259a471fa8892ff177da91b3e1c0792dd7bab
Summary:
This PR supports inserting keys to a `WriteBatchWithIndex` for column families that enable user-defined timestamps
and reading the keys back. **The index does not have timestamps.**
Writing a key to WBWI is unchanged, because the underlying WriteBatch already supports it.
When reading the keys back, we need to make sure to distinguish between keys with and without timestamps before
comparison.
When user calls `GetFromBatchAndDB()`, no timestamp is needed to query the batch, but a timestamp has to be
provided to query the db. The assumption is that data in the batch must be newer than data from the db.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9603
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D34354849
Pulled By: riversand963
fbshipit-source-id: d25d1f84e2240ce543e521fa30595082fb8db9a0
Summary:
Change enum SizeApproximationFlags to enum and class and add
overloaded operators for the transition between enum class and uint8_t
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9604
Test Plan: Circle CI jobs
Reviewed By: riversand963
Differential Revision: D34360281
Pulled By: akankshamahajan15
fbshipit-source-id: 6351dfdb717ae3c4530d324c3d37a8ecb01dd1ef
Summary:
Add Temperature hints information from RocksDB in API
`NewSequentialFile()`. backup and checkpoint operations need to open the
source files with `NewSequentialFile()`, which will have the temperature
hints. Other operations are not covered.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9499
Test Plan: Added unittest
Reviewed By: pdillinger
Differential Revision: D34006115
Pulled By: jay-zhuang
fbshipit-source-id: 568b34602b76520e53128672bd07e9d886786a2f
Summary:
This PR adds support for new APIs Async Read that reads the data
asynchronously and Poll API that checks if requested read request has
completed or not.
Usage: In RocksDB, we are currently planning to prefetch data
asynchronously during sequential scanning and RocksDB will call these
APIs to prefetch more data in advanced.
Design:
- ReadAsync API submits the read request to underlying FileSystem in
order to read data asynchronously. When read request is completed,
callback function will be called. cb_arg is used by RocksDB to track the
original request submitted and IOHandle is used by FileSystem to keep track
of IO requests at their level.
- The Poll API is added in FileSystem because the call could end up handling
completions for multiple different files which is not specific to a
FSRandomAccessFile instance. There could be multiple outstanding file reads
from different files in future and they can complete in any order.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9564
Test Plan: Test will be added in separate PR.
Reviewed By: anand1976
Differential Revision: D34226216
Pulled By: akankshamahajan15
fbshipit-source-id: 95e64edafb17f543f7232421d51e2665a3267f69
Summary:
Make FilterPolicy into a Customizable class. Allow new FilterPolicy to be discovered through the ObjectRegistry
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9590
Reviewed By: pdillinger
Differential Revision: D34327367
Pulled By: mrambacher
fbshipit-source-id: 37e7edac90ec9457422b72f359ab8ef48829c190
Summary:
RocksDB try to provide temperature information in the event
listener callbacks. The information is not guaranteed, as some operation
like backup won't have these information.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9591
Test Plan: Added unittest
Reviewed By: siying, pdillinger
Differential Revision: D34309339
Pulled By: jay-zhuang
fbshipit-source-id: 4aca4f270f99fa49186d85d300da42594663d6d7
Summary:
`ColumnFamilyOptions::OldDefaults` and `DBOptions::OldDefaults`
now deprecated. Were previously overlooked with `Options::OldDefaults` in https://github.com/facebook/rocksdb/issues/9363
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9594
Test Plan: comments only
Reviewed By: jay-zhuang
Differential Revision: D34318592
Pulled By: pdillinger
fbshipit-source-id: 773c97a61e2a8290ae154f363dd61c1f35a9dd16
Summary:
We don't have any evidence of people using these to build custom
filters. The recommended way of customizing filter handling is to
defer to various built-in policies based on FilterBuildingContext
(e.g. to build Monkey filtering policy). With old API, we have
evidence of people modifying keys going into filter, but most cases
of that can be handled with prefix_extractor.
Having FilterBitsBuilder+Reader in the public API is an ogoing
hinderance to code evolution (e.g. recent new Finish and
MaybePostVerify), and so this change removes them from the public API
for 7.0. Maybe they will come back in some form later, but lacking
evidence of them providing value in the public API, we want to take back
more freedom to evolve these.
With this moved to internal-only, there is no rush to clean up the
complex Finish signatures, or add memory allocator support, but doing so
is much easier with them out of public API, for example to use
CacheAllocationPtr without exposing it in the public API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9592
Test Plan: cosmetic changes only
Reviewed By: hx235
Differential Revision: D34315470
Pulled By: pdillinger
fbshipit-source-id: 03e03bb66a72c73df2c464d2dbbbae906dd8f99b
Summary:
The NUM_INDEX_AND_FILTER_BLOCKS_READ_PER_LEVEL, NUM_DATA_BLOCKS_READ_PER_LEVEL, and NUM_SST_READ_PER_LEVEL stats were being recorded only when the last file in a level happened to have hits. They are supposed to be updated for every level. Also, there was some overcounting of GetContextStats. This PR fixes both the problems.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9583
Test Plan: Update the unit test in db_basic_test
Reviewed By: akankshamahajan15
Differential Revision: D34308044
Pulled By: anand1976
fbshipit-source-id: b3b36020fda26ba91bc6e0e47d52d58f4d7f656e
Summary:
Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working.
`RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`.
There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads).
The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424
Test Plan:
- new unit tests
- new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart.
- setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true`
- benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true`
- crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10`
Reviewed By: hx235
Differential Revision: D33747386
Pulled By: ajkr
fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c
Summary:
The following sequence of events can cause silent data loss for write-committed
transactions.
```
Time thread 1 bg flush
| db->Put("a")
| txn = NewTxn()
| txn->Put("b", "v")
| txn->Prepare() // writes only to 5.log
| db->SwitchMemtable() // memtable 1 has "a"
| // close 5.log,
| // creates 8.log
| trigger flush
| pick memtable 1
| unlock db mutex
| write new sst
| txn->ctwb->Put("gtid", "1") // writes 8.log
| txn->Commit() // writes to 8.log
| // writes to memtable 2
| compute min_log_number_to_keep_2pc, this
| will be 8 (incorrect).
|
| Purge obsolete wals, including 5.log
|
V
```
At this point, writes of txn exists only in memtable. Close db without flush because db thinks the data in
memtable are backed by log. Then reopen, the writes are lost except key-value pair {"gtid"->"1"},
only the commit marker of txn is in 8.log
The reason lies in `PrecomputeMinLogNumberToKeep2PC()` which calls `FindMinPrepLogReferencedByMemTable()`.
In the above example, when bg flush thread tries to find obsolete wals, it uses the information
computed by `PrecomputeMinLogNumberToKeep2PC()`. The return value of `PrecomputeMinLogNumberToKeep2PC()`
depends on three components
- `PrecomputeMinLogNumberToKeepNon2PC()`. This represents the WAL that has unflushed data. As the name of this method suggests, it does not account for 2PC. Although the keys reside in the prepare section of a previous WAL, the column family references the current WAL when they are actually inserted into the memtable during txn commit.
- `prep_tracker->FindMinLogContainingOutstandingPrep()`. This represents the WAL with a prepare section but the txn hasn't committed.
- `FindMinPrepLogReferencedByMemTable()`. This represents the WAL on which some memtables (mutable and immutable) depend for their unflushed data.
The bug lies in `FindMinPrepLogReferencedByMemTable()`. Originally, this function skips checking the column families
that are being flushed, but the unit test added in this PR shows that they should not be. In this unit test, there is
only the default column family, and one of its memtables has unflushed data backed by a prepare section in 5.log.
We should return this information via `FindMinPrepLogReferencedByMemTable()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9571
Test Plan:
```
./transaction_test --gtest_filter=*/TransactionTest.SwitchMemtableDuringPrepareAndCommit_WC/*
make check
```
Reviewed By: siying
Differential Revision: D34235236
Pulled By: riversand963
fbshipit-source-id: 120eb21a666728a38dda77b96276c6af72b008b1
Summary:
Remove deprecated remote compaction APIs
`CompactionService::Start()` and `CompactionService::WaitForComplete()`.
Please use `CompactionService::StartV2()`,
`CompactionService::WaitForCompleteV2()` instead, which provides the
same information plus extra data like priority, db_id, etc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9570
Test Plan: CI
Reviewed By: riversand963
Differential Revision: D34255969
Pulled By: jay-zhuang
fbshipit-source-id: c6376eccdd1123f1c42ab53771b5f65f8160c325
Summary:
Add support for doubles to ObjectLibrary::PatternEntry. This support will allow patterns containing a non-integer number to be parsed correctly.
Added appropriate test cases to cover this new option.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9577
Reviewed By: pdillinger
Differential Revision: D34269763
Pulled By: mrambacher
fbshipit-source-id: b5ce16cbd3665c2974ec0f3412ef2b403ef8b155
Summary:
Fix `DisableManualCompaction()` has to wait scheduled manual compaction to start the execution to cancel the job.
When a manual compaction in thread-pool queue is cancel, set the job is_canceled to true and clean the resource.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9557
Test Plan: added unittest that will hang without the change
Reviewed By: ajkr
Differential Revision: D34214910
Pulled By: jay-zhuang
fbshipit-source-id: 89dbaee78ddf26eb13ce862c2b15f4a098b36a78
Yanqin Jin