Summary:
... ahead of a larger change.
* Rename confusingly named `is_in_sec_cache` to `kept_in_sec_cache`
* Unify naming of "standalone" block cache entries (was "detached" in clock_cache)
* Remove some unused definitions in clock_cache.h (leftover from a previous revision)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11291
Test Plan: usual tests and CI, no behavior changes
Reviewed By: anand1976
Differential Revision: D43984642
Pulled By: pdillinger
fbshipit-source-id: b8bf0c5b90a932a88bcbdb413b2f256834aedf97
Summary:
`BlobSourceCacheReservationTest.IncreaseCacheReservationOnFullCache` is both flaky and also doesn't do what its name says. The patch changes this test so it actually tests increasing the cache reservation, hopefully also deflaking it in the process.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11273
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D43800935
Pulled By: ltamasi
fbshipit-source-id: 5eb54130dfbe227285b0e14f2084aa4b89f0b107
Summary:
During backward iteration, blob verification would fail because the user key (ts included) in `saved_key_` doesn't match the blob. This happens because during`FindValueForCurrentKey`, `saved_key_` is not updated when the user key(ts not included) is the same for all cases except when `timestamp_lb_` is specified. This breaks the blob verification logic when user defined timestamp is enabled and `timestamp_lb_` is not specified. Fix this by always updating `saved_key_` when a smaller user key (ts included) is seen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11258
Test Plan:
`make check`
`./db_blob_basic_test --gtest_filter=DBBlobWithTimestampTest.IterateBlobs`
Run db_bench (built with DEBUG_LEVEL=0) to demonstrate that no overhead is introduced with:
`./db_bench -user_timestamp_size=8 -db=/dev/shm/rocksdb -disable_wal=1 -benchmarks=fillseq,seekrandom[-W1-X6] -reverse_iterator=1 -seek_nexts=5`
Baseline:
- seekrandom [AVG 6 runs] : 72188 (± 1481) ops/sec; 37.2 (± 0.8) MB/sec
With this PR:
- seekrandom [AVG 6 runs] : 74171 (± 1427) ops/sec; 38.2 (± 0.7) MB/sec
Reviewed By: ltamasi
Differential Revision: D43675642
Pulled By: jowlyzhang
fbshipit-source-id: 8022ae8522d1f66548821855e6eed63640c14e04
Summary:
A second attempt after https://github.com/facebook/rocksdb/issues/10802, with bug fixes and refactoring. This PR updates compaction logic to take range tombstones into account when determining whether to cut the current compaction output file (https://github.com/facebook/rocksdb/issues/4811). Before this change, only point keys were considered, and range tombstones could cause large compactions. For example, if the current compaction outputs is a range tombstone [a, b) and 2 point keys y, z, they would be added to the same file, and may overlap with too many files in the next level and cause a large compaction in the future. This PR also includes ajkr's effort to simplify the logic to add range tombstones to compaction output files in `AddRangeDels()` ([https://github.com/facebook/rocksdb/issues/11078](https://github.com/facebook/rocksdb/pull/11078#issuecomment-1386078861)).
The main change is for `CompactionIterator` to emit range tombstone start keys to be processed by `CompactionOutputs`. A new class `CompactionMergingIterator` is introduced to replace `MergingIterator` under `CompactionIterator` to enable emitting of range tombstone start keys. Further improvement after this PR include cutting compaction output at some grandparent boundary key (instead of the next output key) when cutting within a range tombstone to reduce overlap with grandparents.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11113
Test Plan:
* added unit test in db_range_del_test
* crash test with a small key range: `python3 tools/db_crashtest.py blackbox --simple --max_key=100 --interval=600 --write_buffer_size=262144 --target_file_size_base=256 --max_bytes_for_level_base=262144 --block_size=128 --value_size_mult=33 --subcompactions=10 --use_multiget=1 --delpercent=3 --delrangepercent=2 --verify_iterator_with_expected_state_one_in=2 --num_iterations=10`
Reviewed By: ajkr
Differential Revision: D42655709
Pulled By: cbi42
fbshipit-source-id: 8367e36ef5640e8f21c14a3855d4a8d6e360a34c
Summary:
The new `MultiGetEntity` API can be used to get a consistent view of
a batch of keys, with the results presented as wide-column entities.
Similarly to `GetEntity` and the iterator's `columns` API, if the entry
corresponding to the key is a wide-column entity to start with, it is
returned as-is, and if it is a plain key-value, it is wrapped into an entity
with a single default column.
Implementation-wise, the new API shares the logic of the batched `MultiGet`
API (via the `MultiGetCommon` methods). Both single-CF and multi-CF
`MultiGetEntity` APIs are provided, and blobs are also supported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11222
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D43256950
Pulled By: ltamasi
fbshipit-source-id: 47fb2cb7e2d0470e3580f43fdb2fe9e51f0e7005
Summary:
The definition of the Cache class should not be needed by the vast majority of RocksDB users, so I think it is just distracting to include it in cache.h, which is primarily needed for configuring and creating caches. This change moves the class to a new header advanced_cache.h. It is just cut-and-paste except for modifying the class API comment.
In general, operations on shared_ptr<Cache> should continue to work when only a forward declaration of Cache is available, as long as all the Cache instances provided are already shared_ptr. See https://stackoverflow.com/a/17650101/454544
Also, the most common way to customize a Cache is by wrapping an existing implementation, so it makes sense to provide CacheWrapper in the public API. This was a cut-and-paste job except removing the implementation of Name() so that derived classes must provide it.
Intended follow-up: consolidate Release() into one function to reduce customization bugs / confusion
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11192
Test Plan: `make check`
Reviewed By: anand1976
Differential Revision: D43055487
Pulled By: pdillinger
fbshipit-source-id: 7b05492df35e0f30b581b4c24c579bc275b6d110
Summary:
The patch fixes a feature interaction bug between BlobDB and the `GetEntity` API:
without the patch, `GetEntity` would return the blob reference (wrapped into a
single-column entity) instead of the actual blob value.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11162
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D42854092
Pulled By: ltamasi
fbshipit-source-id: f750d0ff57def107da16f545077ddce9860ff21a
Summary:
Use the user key on sst file for blob verification for `Get` and `MultiGet` instead of the user key passed from caller.
Add tests for `Get` and `MultiGet` operations when user defined timestamp feature is enabled in a BlobDB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11105
Test Plan:
make V=1 db_blob_basic_test
./db_blob_basic_test --gtest_filter="DBBlobTestWithTimestamp.*"
Reviewed By: ltamasi
Differential Revision: D42716487
Pulled By: jowlyzhang
fbshipit-source-id: 5987ecbb7e56ddf46d2467a3649369390789506a
Summary:
We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support.
Most of changes were done through following comments:
unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'`
by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147
Test Plan: See CI
Reviewed By: pdillinger
Differential Revision: D42796341
fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2
Summary:
This reverts commit f02c708aa3 since it introduced several bugs (see https://github.com/facebook/rocksdb/issues/11078 and https://github.com/facebook/rocksdb/issues/11067 for attempts to fix them) and that I do not have a high confidence to fix all of them and ensure no further ones before the next release branch cut. There are also come existing issue found during bug fixing. We will work on it and try to merge it to the release after.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11089
Test Plan: existing CI.
Reviewed By: ajkr
Differential Revision: D42505972
Pulled By: cbi42
fbshipit-source-id: 2f66dcde6b85dc94977b317c2ce513872cfbc153
Summary:
This is several refactorings bundled into one to avoid having to incrementally re-modify uses of Cache several times. Overall, there are breaking changes to Cache class, and it becomes more of low-level interface for implementing caches, especially block cache. New internal APIs make using Cache cleaner than before, and more insulated from block cache evolution. Hopefully, this is the last really big block cache refactoring, because of rather effectively decoupling the implementations from the uses. This change also removes the EXPERIMENTAL designation on the SecondaryCache support in Cache. It seems reasonably mature at this point but still subject to change/evolution (as I warn in the API docs for Cache).
The high-level motivation for this refactoring is to minimize code duplication / compounding complexity in adding SecondaryCache support to HyperClockCache (in a later PR). Other benefits listed below.
* static_cast lines of code +29 -35 (net removed 6)
* reinterpret_cast lines of code +6 -32 (net removed 26)
## cache.h and secondary_cache.h
* Always use CacheItemHelper with entries instead of just a Deleter. There are several motivations / justifications:
* Simpler for implementations to deal with just one Insert and one Lookup.
* Simpler and more efficient implementation because we don't have to track which entries are using helpers and which are using deleters
* Gets rid of hack to classify cache entries by their deleter. Instead, the CacheItemHelper includes a CacheEntryRole. This simplifies a lot of code (cache_entry_roles.h almost eliminated). Fixes https://github.com/facebook/rocksdb/issues/9428.
* Makes it trivial to adjust SecondaryCache behavior based on kind of block (e.g. don't re-compress filter blocks).
* It is arguably less convenient for many direct users of Cache, but direct users of Cache are now rare with introduction of typed_cache.h (below).
* I considered and rejected an alternative approach in which we reduce customizability by assuming each secondary cache compatible value starts with a Slice referencing the uncompressed block contents (already true or mostly true), but we apparently intend to stack secondary caches. Saving an entry from a compressed secondary to a lower tier requires custom handling offered by SaveToCallback, etc.
* Make CreateCallback part of the helper and introduce CreateContext to work with it (alternative to https://github.com/facebook/rocksdb/issues/10562). This cleans up the interface while still allowing context to be provided for loading/parsing values into primary cache. This model works for async lookup in BlockBasedTable reader (reader owns a CreateContext) under the assumption that it always waits on secondary cache operations to finish. (Otherwise, the CreateContext could be destroyed while async operation depending on it continues.) This likely contributes most to the observed performance improvement because it saves an std::function backed by a heap allocation.
* Use char* for serialized data, e.g. in SaveToCallback, where void* was confusingly used. (We use `char*` for serialized byte data all over RocksDB, with many advantages over `void*`. `memcpy` etc. are legacy APIs that should not be mimicked.)
* Add a type alias Cache::ObjectPtr = void*, so that we can better indicate the intent of the void* when it is to be the object associated with a Cache entry. Related: started (but did not complete) a refactoring to move away from "value" of a cache entry toward "object" or "obj". (It is confusing to call Cache a key-value store (like DB) when it is really storing arbitrary in-memory objects, not byte strings.)
* Remove unnecessary key param from DeleterFn. This is good for efficiency in HyperClockCache, which does not directly store the cache key in memory. (Alternative to https://github.com/facebook/rocksdb/issues/10774)
* Add allocator to Cache DeleterFn. This is a kind of future-proofing change in case we get more serious about using the Cache allocator for memory tracked by the Cache. Right now, only the uncompressed block contents are allocated using the allocator, and a pointer to that allocator is saved as part of the cached object so that the deleter can use it. (See CacheAllocationPtr.) If in the future we are able to "flatten out" our Cache objects some more, it would be good not to have to track the allocator as part of each object.
* Removes legacy `ApplyToAllCacheEntries` and changes `ApplyToAllEntries` signature for Deleter->CacheItemHelper change.
## typed_cache.h
Adds various "typed" interfaces to the Cache as internal APIs, so that most uses of Cache can use simple type safe code without casting and without explicit deleters, etc. Almost all of the non-test, non-glue code uses of Cache have been migrated. (Follow-up work: CompressedSecondaryCache deserves deeper attention to migrate.) This change expands RocksDB's internal usage of metaprogramming and SFINAE (https://en.cppreference.com/w/cpp/language/sfinae).
The existing usages of Cache are divided up at a high level into these new interfaces. See updated existing uses of Cache for examples of how these are used.
* PlaceholderCacheInterface - Used for making cache reservations, with entries that have a charge but no value.
* BasicTypedCacheInterface<TValue> - Used for primary cache storage of objects of type TValue, which can be cleaned up with std::default_delete<TValue>. The role is provided by TValue::kCacheEntryRole or given in an optional template parameter.
* FullTypedCacheInterface<TValue, TCreateContext> - Used for secondary cache compatible storage of objects of type TValue. In addition to BasicTypedCacheInterface constraints, we require TValue::ContentSlice() to return persistable data. This simplifies usage for the normal case of simple secondary cache compatibility (can give you a Slice to the data already in memory). In addition to TCreateContext performing the role of Cache::CreateContext, it is also expected to provide a factory function for creating TValue.
* For each of these, there's a "Shared" version (e.g. FullTypedSharedCacheInterface) that holds a shared_ptr to the Cache, rather than assuming external ownership by holding only a raw `Cache*`.
These interfaces introduce specific handle types for each interface instantiation, so that it's easy to see what kind of object is controlled by a handle. (Ultimately, this might not be worth the extra complexity, but it seems OK so far.)
Note: I attempted to make the cache 'charge' automatically inferred from the cache object type, such as by expecting an ApproximateMemoryUsage() function, but this is not so clean because there are cases where we need to compute the charge ahead of time and don't want to re-compute it.
## block_cache.h
This header is essentially the replacement for the old block_like_traits.h. It includes various things to support block cache access with typed_cache.h for block-based table.
## block_based_table_reader.cc
Before this change, accessing the block cache here was an awkward mix of static polymorphism (template TBlocklike) and switch-case on a dynamic BlockType value. This change mostly unifies on static polymorphism, relying on minor hacks in block_cache.h to distinguish variants of Block. We still check BlockType in some places (especially for stats, which could be improved in follow-up work) but at least the BlockType is a static constant from the template parameter. (No more awkward partial redundancy between static and dynamic info.) This likely contributes to the overall performance improvement, but hasn't been tested in isolation.
The other key source of simplification here is a more unified system of creating block cache objects: for directly populating from primary cache and for promotion from secondary cache. Both use BlockCreateContext, for context and for factory functions.
## block_based_table_builder.cc, cache_dump_load_impl.cc
Before this change, warming caches was super ugly code. Both of these source files had switch statements to basically transition from the dynamic BlockType world to the static TBlocklike world. None of that mess is needed anymore as there's a new, untyped WarmInCache function that handles all the details just as promotion from SecondaryCache would. (Fixes `TODO akanksha: Dedup below code` in block_based_table_builder.cc.)
## Everything else
Mostly just updating Cache users to use new typed APIs when reasonably possible, or changed Cache APIs when not.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10975
Test Plan:
tests updated
Performance test setup similar to https://github.com/facebook/rocksdb/issues/10626 (by cache size, LRUCache when not "hyper" for HyperClockCache):
34MB 1thread base.hyper -> kops/s: 0.745 io_bytes/op: 2.52504e+06 miss_ratio: 0.140906 max_rss_mb: 76.4844
34MB 1thread new.hyper -> kops/s: 0.751 io_bytes/op: 2.5123e+06 miss_ratio: 0.140161 max_rss_mb: 79.3594
34MB 1thread base -> kops/s: 0.254 io_bytes/op: 1.36073e+07 miss_ratio: 0.918818 max_rss_mb: 45.9297
34MB 1thread new -> kops/s: 0.252 io_bytes/op: 1.36157e+07 miss_ratio: 0.918999 max_rss_mb: 44.1523
34MB 32thread base.hyper -> kops/s: 7.272 io_bytes/op: 2.88323e+06 miss_ratio: 0.162532 max_rss_mb: 516.602
34MB 32thread new.hyper -> kops/s: 7.214 io_bytes/op: 2.99046e+06 miss_ratio: 0.168818 max_rss_mb: 518.293
34MB 32thread base -> kops/s: 3.528 io_bytes/op: 1.35722e+07 miss_ratio: 0.914691 max_rss_mb: 264.926
34MB 32thread new -> kops/s: 3.604 io_bytes/op: 1.35744e+07 miss_ratio: 0.915054 max_rss_mb: 264.488
233MB 1thread base.hyper -> kops/s: 53.909 io_bytes/op: 2552.35 miss_ratio: 0.0440566 max_rss_mb: 241.984
233MB 1thread new.hyper -> kops/s: 62.792 io_bytes/op: 2549.79 miss_ratio: 0.044043 max_rss_mb: 241.922
233MB 1thread base -> kops/s: 1.197 io_bytes/op: 2.75173e+06 miss_ratio: 0.103093 max_rss_mb: 241.559
233MB 1thread new -> kops/s: 1.199 io_bytes/op: 2.73723e+06 miss_ratio: 0.10305 max_rss_mb: 240.93
233MB 32thread base.hyper -> kops/s: 1298.69 io_bytes/op: 2539.12 miss_ratio: 0.0440307 max_rss_mb: 371.418
233MB 32thread new.hyper -> kops/s: 1421.35 io_bytes/op: 2538.75 miss_ratio: 0.0440307 max_rss_mb: 347.273
233MB 32thread base -> kops/s: 9.693 io_bytes/op: 2.77304e+06 miss_ratio: 0.103745 max_rss_mb: 569.691
233MB 32thread new -> kops/s: 9.75 io_bytes/op: 2.77559e+06 miss_ratio: 0.103798 max_rss_mb: 552.82
1597MB 1thread base.hyper -> kops/s: 58.607 io_bytes/op: 1449.14 miss_ratio: 0.0249324 max_rss_mb: 1583.55
1597MB 1thread new.hyper -> kops/s: 69.6 io_bytes/op: 1434.89 miss_ratio: 0.0247167 max_rss_mb: 1584.02
1597MB 1thread base -> kops/s: 60.478 io_bytes/op: 1421.28 miss_ratio: 0.024452 max_rss_mb: 1589.45
1597MB 1thread new -> kops/s: 63.973 io_bytes/op: 1416.07 miss_ratio: 0.0243766 max_rss_mb: 1589.24
1597MB 32thread base.hyper -> kops/s: 1436.2 io_bytes/op: 1357.93 miss_ratio: 0.0235353 max_rss_mb: 1692.92
1597MB 32thread new.hyper -> kops/s: 1605.03 io_bytes/op: 1358.04 miss_ratio: 0.023538 max_rss_mb: 1702.78
1597MB 32thread base -> kops/s: 280.059 io_bytes/op: 1350.34 miss_ratio: 0.023289 max_rss_mb: 1675.36
1597MB 32thread new -> kops/s: 283.125 io_bytes/op: 1351.05 miss_ratio: 0.0232797 max_rss_mb: 1703.83
Almost uniformly improving over base revision, especially for hot paths with HyperClockCache, up to 12% higher throughput seen (1597MB, 32thread, hyper). The improvement for that is likely coming from much simplified code for providing context for secondary cache promotion (CreateCallback/CreateContext), and possibly from less branching in block_based_table_reader. And likely a small improvement from not reconstituting key for DeleterFn.
Reviewed By: anand1976
Differential Revision: D42417818
Pulled By: pdillinger
fbshipit-source-id: f86bfdd584dce27c028b151ba56818ad14f7a432
Summary:
This PR is the first step for Issue https://github.com/facebook/rocksdb/issues/4811. Currently compaction output files are cut at point keys, and the decision is made mainly in `CompactionOutputs::ShouldStopBefore()`. This makes it possible for range tombstones to cause large compactions that does not respect `max_compaction_bytes`. For example, we can have a large range tombstone that overlaps with too many files from the next level. Another example is when there is a gap between a range tombstone and another key. The first issue may be more acceptable, as a lot of data is deleted. This PR address the second issue by calling `ShouldStopBefore()` for range tombstone start keys. The main change is for `CompactionIterator` to emit range tombstone start keys to be processed by `CompactionOutputs`. A new `CompactionMergingIterator` is introduced and only used under `CompactionIterator` for this purpose. Further improvement after this PR include 1) cut compaction output at some grandparent boundary key instead of at the next point key or range tombstone start key and 2) cut compaction output file within a large range tombstone (it may be easier and reasonable to only do it for range tombstones at the end of a compaction output).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10802
Test Plan:
- added unit tests in db_range_del_test.
- stress test: `python3 tools/db_crashtest.py whitebox --[simple|enable_ts] --verify_iterator_with_expected_state_one_in=5 --delrangepercent=5 --prefixpercent=2 --writepercent=58 --readpercen=21 --duration=36000 --range_deletion_width=1000000`
Reviewed By: ajkr, jay-zhuang
Differential Revision: D40308827
Pulled By: cbi42
fbshipit-source-id: a8fd6f70a3f09d0ef7a40e006f6c964bba8c00df
Summary:
Apply the formatting changes suggested by `clang-format`, except
where they would ruin the ASCII art in `blob_log_format.h`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10856
Test Plan: `make check`
Reviewed By: siying
Differential Revision: D40652224
Pulled By: ltamasi
fbshipit-source-id: 8c1f5757b758474ea3e8102a7c5a1cf9e6dc1402
Summary:
Instead of existing calls to ps from gnu_parallel, call a new wrapper that does ps, looks for unit test like processes, and uses pstack or gdb to print thread stack traces. Also, using `ps -wwf` instead of `ps -wf` ensures output is not cut off.
For security, CircleCI runs with security restrictions on ptrace (/proc/sys/kernel/yama/ptrace_scope = 1), and this change adds a work-around to `InstallStackTraceHandler()` (only used by testing tools) to allow any process from the same user to debug it. (I've also touched >100 files to ensure all the unit tests call this function.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10828
Test Plan: local manual + temporary infinite loop in a unit test to observe in CircleCI
Reviewed By: hx235
Differential Revision: D40447634
Pulled By: pdillinger
fbshipit-source-id: 718a4c4a5b54fa0f9af2d01a446162b45e5e84e1
Summary:
This is intended as a step toward possibly separating secondary cache integration from the
Cache implementation as much as possible, to (hopefully) minimize code duplication in
adding secondary cache support to HyperClockCache.
* Major clarifications to API docs of secondary cache compatible parts of Cache. For example, previously the docs seemed to suggest that Wait() was not needed if IsReady()==true. And it wasn't clear what operations were actually supported on pending handles.
* Add some assertions related to these requirements, such as that we don't Release() before Wait() (which would leak a secondary cache handle).
* Fix a leaky abstraction with dummy handles, which are supposed to be internal to the Cache. Previously, these just used value=nullptr to indicate dummy handle, which meant that they could be confused with legitimate value=nullptr cases like cache reservations. Also fixed blob_source_test which was relying on this leaky abstraction.
* Drop "incomplete" terminology, which was another name for "pending".
* Split handle flags into "mutable" ones requiring mutex and "immutable" ones which do not. Because of single-threaded access to pending handles, the "Is Pending" flag can be in the "immutable" set. This allows removal of a TSAN work-around and removing a mutex acquire-release in IsReady().
* Remove some unnecessary handling of charges on handles of failed lookups. Keeping total_charge=0 means no special handling needed. (Removed one unnecessary mutex acquire/release.)
* Simplify handling of dummy handle in Lookup(). There is no need to explicitly Ref & Release w/Erase if we generally overwrite the dummy anyway. (Removed one mutex acquire/release, a call to Release().)
Intended follow-up:
* Clarify APIs in secondary_cache.h
* Doesn't SecondaryCacheResultHandle transfer ownership of the Value() on success (implementations should not release the value in destructor)?
* Does Wait() need to be called if IsReady() == true? (This would be different from Cache.)
* Do Value() and Size() have undefined behavior if IsReady() == false?
* Why have a custom API for what is essentially a std::future<std::pair<void*, size_t>>?
* Improve unit testing of standalone handle case
* Apparent null `e` bug in `free_standalone_handle` case
* Clean up secondary cache testing in lru_cache_test
* Why does TestSecondaryCacheResultHandle hold on to a Cache::Handle?
* Why does TestSecondaryCacheResultHandle::Wait() do nothing? Shouldn't it establish the post-condition IsReady() == true?
* (Assuming that is sorted out...) Shouldn't TestSecondaryCache::WaitAll simply wait on each handle in order (no casting required)? How about making that the default implementation?
* Why does TestSecondaryCacheResultHandle::Size() check Value() first? If the API is intended to be returning 0 before IsReady(), then that is weird but should at least be documented. Otherwise, if it's intended to be undefined behavior, we should assert IsReady().
* Consider replacing "standalone" and "dummy" entries with a single kind of "weak" entry that deletes its value when it reaches zero refs. Suppose you are using compressed secondary cache and have two iterators at similar places. It will probably common for one iterator to have standalone results pinned (out of cache) when the second iterator needs those same blocks and has to re-load them from secondary cache and duplicate the memory. Combining the dummy and the standalone should fix this.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10730
Test Plan:
existing tests (minor update), and crash test with sanitizers and secondary cache
Performance test for any regressions in LRUCache (primary only):
Create DB with
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=30000000 -disable_wal=1 -bloom_bits=16
```
Test before & after (run at same time) with
```
TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=readrandom[-X100] -readonly -num=30000000 -bloom_bits=16 -cache_index_and_filter_blocks=1 -cache_size=233000000 -duration 30 -threads=16
```
Before: readrandom [AVG 100 runs] : 22234 (± 63) ops/sec; 1.6 (± 0.0) MB/sec
After: readrandom [AVG 100 runs] : 22197 (± 64) ops/sec; 1.6 (± 0.0) MB/sec
That's within 0.2%, which is not significant by the confidence intervals.
Reviewed By: anand1976
Differential Revision: D39826010
Pulled By: anand1976
fbshipit-source-id: 3202b4a91f673231c97648ae070e502ae16b0f44
Summary:
Historically, `BlobFileReader` has returned the blob(s) read from the file
in the `PinnableSlice` provided by the client. This interface was
preserved when caching was implemented for blobs, which meant that
the blob data was copied multiple times when caching was in use: first,
into the client-provided `PinnableSlice` (by `BlobFileReader::SaveValue`),
and then, into the object stored in the cache (by `BlobSource::PutBlobIntoCache`).
The patch eliminates these copies and the related allocations by changing
`BlobFileReader` so it returns its results in the form of heap-allocated `BlobContents`
objects that can be directly inserted into the cache. The allocations backing
these `BlobContents` objects are made using the blob cache's allocator if the
blobs are to be inserted into the cache (i.e. if a cache is configured and the
`fill_cache` read option is set). Note: this PR focuses on the common case when
blobs are compressed; some further small optimizations are possible for uncompressed
blobs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10647
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D39335185
Pulled By: ltamasi
fbshipit-source-id: 464503d60a5520d654c8273ffb8efd5d1bcd7b36
Summary:
**Summary:**
When a block is firstly `Lookup` from the secondary cache, we just insert a dummy block in the primary cache (charging the actual size of the block) and don’t erase the block from the secondary cache. A standalone handle is returned from `Lookup`. Only if the block is hit again, we erase it from the secondary cache and add it into the primary cache.
When a block is firstly evicted from the primary cache to the secondary cache, we just insert a dummy block (size 0) in the secondary cache. When the block is evicted again, it is treated as a hot block and is inserted into the secondary cache.
**Implementation Details**
Add a new state of LRUHandle: The handle is never inserted into the LRUCache (both hash table and LRU list) and it doesn't experience the above three states. The entry can be freed when refs becomes 0. (refs >= 1 && in_cache == false && IS_STANDALONE == true)
The behaviors of `LRUCacheShard::Lookup()` are updated if the secondary_cache is CompressedSecondaryCache:
1. If a handle is found in primary cache:
1.1. If the handle's value is not nullptr, it is returned immediately.
1.2. If the handle's value is nullptr, this means the handle is a dummy one. For a dummy handle, if it was retrieved from secondary cache, it may still exist in secondary cache.
- 1.2.1. If no valid handle can be `Lookup` from secondary cache, return nullptr.
- 1.2.2. If the handle from secondary cache is valid, erase it from the secondary cache and add it into the primary cache.
2. If a handle is not found in primary cache:
2.1. If no valid handle can be `Lookup` from secondary cache, return nullptr.
2.2. If the handle from secondary cache is valid, insert a dummy block in the primary cache (charging the actual size of the block) and return a standalone handle.
The behaviors of `LRUCacheShard::Promote()` are updated as follows:
1. If `e->sec_handle` has value, one of the following steps can happen:
1.1. Insert a dummy handle and return a standalone handle to caller when `secondary_cache_` is `CompressedSecondaryCache` and e is a standalone handle.
1.2. Insert the item into the primary cache and return the handle to caller.
1.3. Exception handling.
3. If `e->sec_handle` has no value, mark the item as not in cache and charge the cache as its only metadata that'll shortly be released.
The behavior of `CompressedSecondaryCache::Insert()` is updated:
1. If a block is evicted from the primary cache for the first time, a dummy item is inserted.
4. If a dummy item is found for a block, the block is inserted into the secondary cache.
The behavior of `CompressedSecondaryCache:::Lookup()` is updated:
1. If a handle is not found or it is a dummy item, a nullptr is returned.
2. If `erase_handle` is true, the handle is erased.
The behaviors of `LRUCacheShard::Release()` are adjusted for the standalone handles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10527
Test Plan:
1. stress tests.
5. unit tests.
6. CPU profiling for db_bench.
Reviewed By: siying
Differential Revision: D38747613
Pulled By: gitbw95
fbshipit-source-id: 74a1eba7e1957c9affb2bd2ae3e0194584fa6eca
Summary:
Example failure:
```
db/blob/db_blob_basic_test.cc:226: Failure
Expected equality of these values:
i
Which is: 1
num_blobs
Which is: 5
```
I can't repro locally, but it looks like the 2KB cache is too small to guarantee no eviction happens between loading all the data into cache and reading from `kBlockCacheTier`. This 2KB setting appears to have come from a test where the cached entries are pinned, where it makes sense to have a small setting. However, such a small setting makes less sense when the blocks are evictable but must remain cached per the test's expectation. This PR increases the capacity setting to 2MB for those cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10636
Reviewed By: cbi42
Differential Revision: D39250976
Pulled By: ajkr
fbshipit-source-id: 769309f9a19cfac20b67b927805c8df5c1d2d1f5
Summary:
With the current code, when a blob isn't found in the cache and gets read
from the blob file and then inserted into the cache, the application gets
passed the self-contained `PinnableSlice` resulting from the blob file read.
The patch changes this so that the `PinnableSlice` pins the cache entry
instead in this case.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10625
Test Plan: `make check`
Reviewed By: pdillinger
Differential Revision: D39220904
Pulled By: ltamasi
fbshipit-source-id: cb9c62881e3523b1e9f614e00bf503bac2fe3b0a
Summary:
The patch adds a dedicated cache entry role for blob values and switches
to a registered deleter so that blobs show up as a separate bucket
(as opposed to "Misc") in the cache occupancy statistics, e.g.
```
Block cache entry stats(count,size,portion): DataBlock(133515,531.73 MB,13.6866%) BlobValue(1824855,3.10 GB,81.7071%) Misc(1,0.00 KB,0%)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10601
Test Plan: Ran `make check` and tested the cache occupancy statistics using `db_bench`.
Reviewed By: riversand963
Differential Revision: D39107915
Pulled By: ltamasi
fbshipit-source-id: 8446c3b190a41a144030df73f318eeda4398c125
Summary:
The patch improves the bookkeeping around the memory usage of
cached blobs in two ways: 1) it uses `malloc_usable_size`, which accounts
for allocator bin sizes etc., and 2) it also considers the memory usage
of the `BlobContents` object in addition to the blob itself. Note: some unit
tests had been relying on the cache charge being equal to the size of the
cached blob; these were updated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10583
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D39060680
Pulled By: ltamasi
fbshipit-source-id: 3583adce2b4ce6e84861f3fadccbfd2e5a3cc482
Summary:
The patch introduces a new class called `BlobContents`, which represents
a single uncompressed blob value. We currently use `std::string` for this
purpose; `BlobContents` is somewhat smaller but the primary reason for a
dedicated class is that it enables certain improvements and optimizations
like eliding a copy when inserting a blob into the cache, using custom
allocators, or more control over and better accounting of the memory usage
of cached blobs (see https://github.com/facebook/rocksdb/issues/10484).
(We plan to implement these in subsequent PRs.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10571
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D39000965
Pulled By: ltamasi
fbshipit-source-id: f296eddf9dec4fc3e11cad525b462bdf63c78f96
Summary:
RocksDB's `Cache` abstraction currently supports two priority levels for items: high (used for frequently accessed/highly valuable SST metablocks like index/filter blocks) and low (used for SST data blocks). Blobs are typically lower-value targets for caching than data blocks, since 1) with BlobDB, data blocks containing blob references conceptually form an index structure which has to be consulted before we can read the blob value, and 2) cached blobs represent only a single key-value, while cached data blocks generally contain multiple KVs. Since we would like to make it possible to use the same backing cache for the block cache and the blob cache, it would make sense to add a new, lower-than-low cache priority level (bottom level) for blobs so data blocks are prioritized over them.
This task is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10461
Reviewed By: siying
Differential Revision: D38672823
Pulled By: ltamasi
fbshipit-source-id: 90cf7362036563d79891f47be2cc24b827482743
Summary:
... so that cache keys can be derived from DB manifest data
before reading the file from storage--so that every part of the file
can potentially go in a persistent cache.
See updated comments in cache_key.cc for technical details. Importantly,
the new cache key encoding uses some fancy but efficient math to pack
data into the cache key without depending on the sizes of the various
pieces. This simplifies some existing code creating cache keys, like
cache warming before the file size is known.
This should provide us an essentially permanent mapping between SST
unique IDs and base cache keys, with the ability to "upgrade" SST
unique IDs (and thus cache keys) with new SST format_versions.
These cache keys are of similar, perhaps indistinguishable quality to
the previous generation. Before this change (see "corrected" days
between collision):
```
./cache_bench -stress_cache_key -sck_keep_bits=43
18 collisions after 2 x 90 days, est 10 days between (1.15292e+19 corrected)
```
After this change (keep 43 bits, up through 50, to validate "trajectory"
is ok on "corrected" days between collision):
```
19 collisions after 3 x 90 days, est 14.2105 days between (1.63836e+19 corrected)
16 collisions after 5 x 90 days, est 28.125 days between (1.6213e+19 corrected)
15 collisions after 7 x 90 days, est 42 days between (1.21057e+19 corrected)
15 collisions after 17 x 90 days, est 102 days between (1.46997e+19 corrected)
15 collisions after 49 x 90 days, est 294 days between (2.11849e+19 corrected)
15 collisions after 62 x 90 days, est 372 days between (1.34027e+19 corrected)
15 collisions after 53 x 90 days, est 318 days between (5.72858e+18 corrected)
15 collisions after 309 x 90 days, est 1854 days between (1.66994e+19 corrected)
```
However, the change does modify (probably weaken) the "guaranteed unique" promise from this
> SST files generated in a single process are guaranteed to have unique cache keys, unless/until number session ids * max file number = 2**86
to this (see https://github.com/facebook/rocksdb/issues/10388)
> With the DB id limitation, we only have nice guaranteed unique cache keys for files generated in a single process until biggest session_id_counter and offset_in_file reach combined 64 bits
I don't think this is a practical concern, though.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10394
Test Plan: unit tests updated, see simulation results above
Reviewed By: jay-zhuang
Differential Revision: D38667529
Pulled By: pdillinger
fbshipit-source-id: 49af3fe7f47e5b61162809a78b76c769fd519fba
Summary:
New blobdb has a bug in compaction filter, where `blob_value_` is not reset for next iterated key. This will cause blob_value_ not empty and previous value read from blob is passed into the filter function for next key, even if its value is not in blob. Fixed by reseting regardless of key type.
Test Case:
Add `FilterByValueLength` test case in `DBBlobCompactionTest`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10391
Reviewed By: riversand963
Differential Revision: D38629900
Pulled By: ltamasi
fbshipit-source-id: 47d23ff2e5ec697958a210db9e6ceeb8b2fc49fa
Summary:
A flag in WritableFileWriter is introduced to remember error has happened. Subsequent operations will fail with an assertion. Those operations, except Close() are not supposed to be called anyway. This change will help catch bug in tests and stress tests and limit damage of a potential bug of continue writing to a file after a failure.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10489
Test Plan: Fix existing unit tests and watch crash tests for a while.
Reviewed By: anand1976
Differential Revision: D38473277
fbshipit-source-id: 09aafb971e56cfd7f9ef92ad15b883f54acf1366
Summary:
We have recently added caching support to BlobDB, and separately,
implemented an optimization where reading blobs from the cache
results in the cache handle being transferred to the target `PinnableSlice`
(as opposed to the contents getting copied). With these changes,
it makes sense to reset the `PinnableSlice` storing the blob value in
`DBIter` as soon as we move to a different iterator position to prevent
us from holding on to the cache handle any longer than necessary.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10490
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D38473630
Pulled By: ltamasi
fbshipit-source-id: 84c045ffac76436c6152fd0f5775b007f4051386
Summary:
Similarly to https://github.com/facebook/rocksdb/pull/10457, we now have
to explicitly set the `fill_cache` read option when reading blobs in
`DBIter` to prevent the cache from getting polluted by queries with
`fill_cache` set to false. (Before we added support for a blob cache,
the setting had not made any difference either way.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10492
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D38476121
Pulled By: ltamasi
fbshipit-source-id: ea5c5e252f83e4a4e2c74156b37d40308d7e0c80
Summary:
Local static string is not friendly to Jemalloc arena aware implementation, as it will be allocated on the arena of the first caller, which causes crash if the allocated arena gets refunded earlier.
P.S. A Jemalloc arena aware implementation is each rocksdb instance only use certain Jemalloc arenas, and arena will be refunded after associated DB instance is destroyed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8103
Reviewed By: ajkr
Differential Revision: D38477235
Pulled By: ltamasi
fbshipit-source-id: a58d32cb647ed64c144b4736fb2d5db27c2c28f9
Summary:
During compaction, blobs are currently read using the default
`ReadOptions`, which has the `fill_cache` flag set to true. Earlier,
this didn't make any difference since we didn't have a blob cache;
however, now we have to explicitly set this flag to false to avoid
polluting the cache during compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10457
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D38333528
Pulled By: ltamasi
fbshipit-source-id: 5b4d49a1e39543bee73c7df2aa9194fb101875e2
Summary:
RocksDB's `Cache` abstraction currently supports two priority levels for items: high (used for frequently accessed/highly valuable SST metablocks like index/filter blocks) and low (used for SST data blocks). Blobs are typically lower-value targets for caching than data blocks, since 1) with BlobDB, data blocks containing blob references conceptually form an index structure which has to be consulted before we can read the blob value, and 2) cached blobs represent only a single key-value, while cached data blocks generally contain multiple KVs. Since we would like to make it possible to use the same backing cache for the block cache and the blob cache, it would make sense to add a new, lower-than-low cache priority level (bottom level) for blobs so data blocks are prioritized over them.
This task is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10309
Reviewed By: ltamasi
Differential Revision: D38211655
Pulled By: gangliao
fbshipit-source-id: 65ef33337db4d85277cc6f9782d67c421ad71dd5
Summary:
GCC-12 has strick check on variables, and thus
build fails when it finds read_req is not properly
initialized (-Werror=maybe-uninitialized). Add
default value to fix this.
Change-Id: Ib8a9085e2d613ee7b943b58a6a58e1bc351725d7
Signed-off-by: Jun He <jun.he@arm.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10312
Reviewed By: riversand963
Differential Revision: D37656997
Pulled By: ajkr
fbshipit-source-id: fe47492c913b34b3a03c04beeec9ec57831dcaff
Summary:
To help service owners to manage their memory budget effectively, we have been working towards counting all major memory users inside RocksDB towards a single global memory limit (see e.g. https://github.com/facebook/rocksdb/wiki/Write-Buffer-Manager#cost-memory-used-in-memtable-to-block-cache). The global limit is specified by the capacity of the block-based table's block cache, and is technically implemented by inserting dummy entries ("reservations") into the block cache. The goal of this task is to support charging the memory usage of the new blob cache against this global memory limit when the backing cache of the blob cache and the block cache are different.
This PR is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10321
Reviewed By: ltamasi
Differential Revision: D37913590
Pulled By: gangliao
fbshipit-source-id: eaacf23907f82dc7d18964a3f24d7039a2937a72
Summary:
Many workloads have temporal locality, where recently written items are read back in a short period of time. When using remote file systems, this is inefficient since it involves network traffic and higher latencies. Because of this, we would like to support prepopulating the blob cache during flush.
This task is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10298
Reviewed By: ltamasi
Differential Revision: D37908743
Pulled By: gangliao
fbshipit-source-id: 9feaed234bc719d38f0c02975c1ad19fa4bb37d1
Summary:
RocksDB supports a two-level cache hierarchy (see https://rocksdb.org/blog/2021/05/27/rocksdb-secondary-cache.html), where items evicted from the primary cache can be spilled over to the secondary cache, or items from the secondary cache can be promoted to the primary one. We have a CacheLib-based non-volatile secondary cache implementation that can be used to improve read latencies and reduce the amount of network bandwidth when using distributed file systems. In addition, we have recently implemented a compressed secondary cache that can be used as a replacement for the OS page cache when e.g. direct I/O is used. The goals of this task are to add support for using a secondary cache with the blob cache and to measure the potential performance gains using `db_bench`.
This task is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10349
Reviewed By: ltamasi
Differential Revision: D37896773
Pulled By: gangliao
fbshipit-source-id: 7804619ce4a44b73d9e11ad606640f9385969c84
Summary:
The blob cache enables an optimization on the read path: when a blob is found in the cache, we can avoid copying it into the buffer provided by the application. Instead, we can simply transfer ownership of the cache handle to the target `PinnableSlice`. (Note: this relies on the `Cleanable` interface, which is implemented by `PinnableSlice`.)
This has the potential to save a lot of CPU, especially with large blob values.
This task is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10297
Reviewed By: riversand963
Differential Revision: D37640311
Pulled By: gangliao
fbshipit-source-id: 92de0e35cc703d06c87c5c1861cc2899ec52234a
Summary:
I noticed it would clean up some things to have Cache::Insert()
return our MemoryLimit Status instead of Incomplete for the case in
which the capacity limit is reached. I suspect this fixes some existing but
unknown bugs where this Incomplete could be confused with other uses
of Incomplete, especially no_io cases. This is the most suspicious case I
noticed, but was not able to reproduce a bug, in part because the existing
code is not covered by unit tests (FIXME added): 57adbf0e91/table/get_context.cc (L397)
I audited all the existing uses of IsIncomplete and updated those that
seemed relevant.
HISTORY updated with a clear warning to users of strict_capacity_limit=true
to update uses of `IsIncomplete()`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10262
Test Plan: updated unit tests
Reviewed By: hx235
Differential Revision: D37473155
Pulled By: pdillinger
fbshipit-source-id: 4bd9d9353ccddfe286b03ebd0652df8ce20f99cb
Summary:
- [x] Enabled blob caching for MultiGetBlob in RocksDB
- [x] Refactored MultiGetBlob logic and interface in RocksDB
- [x] Cleaned up Version::MultiGetBlob() and moved 'blob'-related code snippets into BlobSource
- [x] Add End-to-end test cases in db_blob_basic_test and also add unit tests in blob_source_test
This task is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10272
Reviewed By: ltamasi
Differential Revision: D37558112
Pulled By: gangliao
fbshipit-source-id: a73a6a94ffdee0024d5b2a39e6d1c1a7d38664db
Summary:
The `bytes_read` returned by the current BlobSource interface is ambiguous. The uncompressed blob size is returned if the cache hits. The size of the blob read from disk, presumably the compressed version, is returned if the cache misses. Two differing semantics might cause ambiguity and consistency issues. For example, this inconsistency causes the assertion failure (T124246362 and its hot fix is https://github.com/facebook/rocksdb/issues/10249).
This goal is to require that the value of `byte read` always be an on-disk blob record size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10248
Reviewed By: ltamasi
Differential Revision: D37470292
Pulled By: gangliao
fbshipit-source-id: fbca521b2791d3674dbf2484cea5fcae2fdd94d2
Summary:
This task is to fix assertion failures during the crash test runs. The cache entry size might not match value size because value size can include the on-disk (possibly compressed) size. Therefore, we removed the assertions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10249
Reviewed By: ltamasi
Differential Revision: D37407576
Pulled By: gangliao
fbshipit-source-id: 577559f267c5b2437bcd0631cd0efabb6dde3b69
Summary:
There is currently no caching mechanism for blobs, which is not ideal especially when the database resides on remote storage (where we cannot rely on the OS page cache). As part of this task, we would like to make it possible for the application to configure a blob cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10225
Test Plan:
Add test cases for MultiGetBlob
In this task, we added the new API MultiGetBlob() for BlobSource.
This PR is a part of https://github.com/facebook/rocksdb/issues/10156
Reviewed By: ltamasi
Differential Revision: D37358364
Pulled By: gangliao
fbshipit-source-id: aff053a37615d96d768fb9aedde17da5618c7ae6
Summary:
There is currently no caching mechanism for blobs, which is not ideal especially when the database resides on remote storage (where we cannot rely on the OS page cache). As part of this task, we would like to make it possible for the application to configure a blob cache.
In this task, we formally introduced the blob source to RocksDB. BlobSource is a new abstraction layer that provides universal access to blobs, regardless of whether they are in the blob cache, secondary cache, or (remote) storage. Depending on user settings, it always fetch blobs from multi-tier cache and storage with minimal cost.
Note: The new `MultiGetBlob()` implementation is not included in the current PR. To go faster, we aim to create a separate PR for it in parallel!
This PR is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10198
Reviewed By: ltamasi
Differential Revision: D37294735
Pulled By: gangliao
fbshipit-source-id: 9cb50422d9dd1bc03798501c2778b6c7520c7a1e
Summary:
include "include/rocksdb/blah.h" is messing up some internal
builds vs. include "rocksdb/blah." This fixes the bad case and adds a
check for future instances.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10213
Test Plan: back-port to 7.4 release candidate and watch internal build
Reviewed By: hx235
Differential Revision: D37296202
Pulled By: pdillinger
fbshipit-source-id: d7cc6b2c57d858dff0444f19320d83c8b4f9b185
Summary:
There is currently no caching mechanism for blobs, which is not ideal especially when the database resides on remote storage (where we cannot rely on the OS page cache). As part of this task, we would like to make it possible for the application to configure a blob cache.
In this task, we added a new abstraction layer `BlobSource` to retrieve blobs from either blob cache or raw blob file. Note: For simplicity, the current PR only includes `GetBlob()`. `MultiGetBlob()` will be included in the next PR.
This PR is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10178
Reviewed By: ltamasi
Differential Revision: D37250507
Pulled By: gangliao
fbshipit-source-id: 3fc4a55a0cea955a3147bdc7dba06430e377259b
Peter Dillinger