Summary:
Resolves https://github.com/facebook/rocksdb/issues/9692
This PR adds a unit test that reproduces the race described in https://github.com/facebook/rocksdb/issues/9692 and an according fix.
The unit test does not have any assertions, because I could not find a reliable and save way to assert that the writers list does not form a cycle. So with the old (buggy) code, the test would simply hang, while with the fix the test passes successfully.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9944
Reviewed By: pdillinger
Differential Revision: D36134604
Pulled By: riversand963
fbshipit-source-id: ef636c5a79ddbef18658ab2f19ca9210a427324a
Summary:
When WriteBufferManager is shared across DBs and column families
to maintain memory usage under a limit, OOMs have been observed when flush cannot
finish but writes continuously insert to memtables.
In order to avoid OOMs, when memory usage goes beyond buffer_limit_ and DBs tries to write,
this change will stall incoming writers until flush is completed and memory_usage
drops.
Design: Stall condition: When total memory usage exceeds WriteBufferManager::buffer_size_
(memory_usage() >= buffer_size_) WriterBufferManager::ShouldStall() returns true.
DBImpl first block incoming/future writers by calling write_thread_.BeginWriteStall()
(which adds dummy stall object to the writer's queue).
Then DB is blocked on a state State::Blocked (current write doesn't go
through). WBStallInterface object maintained by every DB instance is added to the queue of
WriteBufferManager.
If multiple DBs tries to write during this stall, they will also be
blocked when check WriteBufferManager::ShouldStall() returns true.
End Stall condition: When flush is finished and memory usage goes down, stall will end only if memory
waiting to be flushed is less than buffer_size/2. This lower limit will give time for flush
to complete and avoid continous stalling if memory usage remains close to buffer_size.
WriterBufferManager::EndWriteStall() is called,
which removes all instances from its queue and signal them to continue.
Their state is changed to State::Running and they are unblocked. DBImpl
then signal all incoming writers of that DB to continue by calling
write_thread_.EndWriteStall() (which removes dummy stall object from the
queue).
DB instance creates WBMStallInterface which is an interface to block and
signal DBs during stall.
When DB needs to be blocked or signalled by WriteBufferManager,
state_for_wbm_ state is changed accordingly (RUNNING or BLOCKED).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7898
Test Plan: Added a new test db/db_write_buffer_manager_test.cc
Reviewed By: anand1976
Differential Revision: D26093227
Pulled By: akankshamahajan15
fbshipit-source-id: 2bbd982a3fb7033f6de6153aa92a221249861aae
Summary:
This PR adds the foundation classes for key-value integrity protection and the first use case: protecting live updates from the source buffers added to `WriteBatch` through the destination buffer in `MemTable`. The width of the protection info is not yet configurable -- only eight bytes per key is supported. This PR allows users to enable protection by constructing `WriteBatch` with `protection_bytes_per_key == 8`. It does not yet expose a way for users to get integrity protection via other write APIs (e.g., `Put()`, `Merge()`, `Delete()`, etc.).
The foundation classes (`ProtectionInfo.*`) embed the coverage info in their type, and provide `Protect.*()` and `Strip.*()` functions to navigate between types with different coverage. For making bytes per key configurable (for powers of two up to eight) in the future, these classes are templated on the unsigned integer type used to store the protection info. That integer contains the XOR'd result of hashes with independent seeds for all covered fields. For integer fields, the hash is computed on the raw unadjusted bytes, so the result is endian-dependent. The most significant bytes are truncated when the hash value (8 bytes) is wider than the protection integer.
When `WriteBatch` is constructed with `protection_bytes_per_key == 8`, we hold a `ProtectionInfoKVOTC` (i.e., one that covers key, value, optype aka `ValueType`, timestamp, and CF ID) for each entry added to the batch. The protection info is generated from the original buffers passed by the user, as well as the original metadata generated internally. When writing to memtable, each entry is transformed to a `ProtectionInfoKVOTS` (i.e., dropping coverage of CF ID and adding coverage of sequence number), since at that point we know the sequence number, and have already selected a memtable corresponding to a particular CF. This protection info is verified once the entry is encoded in the `MemTable` buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7748
Test Plan:
- an integration test to verify a wide variety of single-byte changes to the encoded `MemTable` buffer are caught
- add to stress/crash test to verify it works in variety of configs/operations without intentional corruption
- [deferred] unit tests for `ProtectionInfo.*` classes for edge cases like KV swap, `SliceParts` and `Slice` APIs are interchangeable, etc.
Reviewed By: pdillinger
Differential Revision: D25754492
Pulled By: ajkr
fbshipit-source-id: e481bac6c03c2ab268be41359730f1ceb9964866
Summary:
`BeginWriteStall()` removes no_slowdown write from the write
list and updates `link_newer`, which makes `CreateMissingNewerLinks()`
thought all write list has valid `link_newer` and failed to create link
for all writers.
It caused flaky test and SegFault for release build.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7508
Test Plan: Add unittest to reproduce the issue.
Reviewed By: anand1976
Differential Revision: D24126601
Pulled By: jay-zhuang
fbshipit-source-id: f8ac5dba653f7ee1b0950296427d4f5f8ee34a06
Summary:
We've seen some segfaults in db_write_test, with at least one
suggesting corruption of a write group linked list. Adding an assertion
to have this fail in a more specific way if that is the broken
invariant.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7375
Test Plan: make check
Reviewed By: jay-zhuang
Differential Revision: D23638477
Pulled By: pdillinger
fbshipit-source-id: a76fd677cad60a3a516bd363947bfd9ce418edc1
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
Fixed an error when compiled with -Og:
db/write_thread.cc:183:14: error: 'state' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6275
Differential Revision: D19381755
fbshipit-source-id: a90bf3cd4a7248d9d71219e918fc6253deb97e3c
Summary:
When there is a write stall, the active write group leader calls ```BeginWriteStall()``` to walk the queue of writers and remove any with the ```no_slowdown``` option set. There was a bug in the code which updated the back pointer but not the forward pointer (```link_newer```), corrupting the list and causing some threads to wait forever. This PR fixes it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6322
Test Plan: Add a unit test in db_write_test
Differential Revision: D19538313
Pulled By: anand1976
fbshipit-source-id: 6fbed819e594913f435886606f5d36f74f235c3a
Summary:
When we do concurrently writes, and different write operations will have WAL enable or disable.
But the data from write operation with WAL disabled will still be logged into log files, which will lead to extra disk write/sync since we do not want any guarantee for these part of data.
Detail can be found in https://github.com/facebook/rocksdb/issues/6280. This PR avoid mixing the two types in a write group. The advantage is simpler reasoning about the write group content
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6290
Differential Revision: D19448598
Pulled By: maysamyabandeh
fbshipit-source-id: 3d990a0f79a78ea1bfc90773f6ebafc1884c20de
Summary:
The max batch size that we can write to the WAL is controlled by a static manner. So if the leader write is less than 128 KB we will have the batch size as leader write size + 128 KB else the limit will be 1 MB. Both of them are statically defined.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5759
Differential Revision: D17329298
fbshipit-source-id: a3d910629d8d8ca84ea39ad89c2b2d284571ded5
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
There is a bug when the write queue leader is blocked on a write
delay/stop, and the queue has writers with WriteOptions::no_slowdown set
to true. They are not woken up until the write stall is cleared.
The fix introduces a dummy writer inserted at the tail to indicate a
write stall and prevent further inserts into the queue, and a condition
variable that writers who can tolerate slowdown wait on before adding
themselves to the queue. The leader calls WriteThread::BeginWriteStall()
to add the dummy writer and then walk the queue to fail any writers with
no_slowdown set. Once the stall clears, the leader calls
WriteThread::EndWriteStall() to remove the dummy writer and signal the
condition variable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4475
Differential Revision: D10285827
Pulled By: anand1976
fbshipit-source-id: 747465e5e7f07a829b1fb0bc1afcd7b93f4ab1a9
Summary:
Fix the issue when pipelined write is enabled, writers can get stuck indefinitely and not able to finish the write. It can show with the following example: Assume there are 4 writers W1, W2, W3, W4 (W1 is the first, W4 is the last).
T1: all writers pending in WAL writer queue:
WAL writer queue: W1, W2, W3, W4
memtable writer queue: empty
T2. W1 finish WAL writer and move to memtable writer queue:
WAL writer queue: W2, W3, W4,
memtable writer queue: W1
T3. W2 and W3 finish WAL write as a batch group. W2 enter ExitAsBatchGroupLeader and move the group to memtable writer queue, but before wake up next leader.
WAL writer queue: W4
memtable writer queue: W1, W2, W3
T4. W1, W2, W3 finish memtable write as a batch group. Note that W2 still in the previous ExitAsBatchGroupLeader, although W1 have done memtable write for W2.
WAL writer queue: W4
memtable writer queue: empty
T5. The thread corresponding to W3 create another writer W3' with the same address as W3.
WAL writer queue: W4, W3'
memtable writer queue: empty
T6. W2 continue with ExitAsBatchGroupLeader. Because the address of W3' is the same as W3, the last writer in its group, it thinks there are no pending writers, so it reset newest_writer_ to null, emptying the queue. W4 and W3' are deleted from the queue and will never be wake up.
The issue exists since pipelined write was introduced in 5.5.0.
Closes#3704
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4143
Differential Revision: D8871599
Pulled By: yiwu-arbug
fbshipit-source-id: 3502674e51066a954a0660257e24ac588f815e2a
Summary:
DBTest.GroupCommitTest would often fail when run under valgrind because its sleeps were insufficient to guarantee a group commit had multiple entries. Instead we can use sync point to force a leader to wait until a non-leader thread has enqueued its work, thus guaranteeing a leader can do group commit work for multiple threads.
Closes https://github.com/facebook/rocksdb/pull/3883
Differential Revision: D8079429
Pulled By: ajkr
fbshipit-source-id: 61dc50fad29d2c85547842f681288de60fa29049
Summary:
There's a group of stats in PerfContext for profiling the write path. They break down the write time into WAL write, memtable insert, throttling, and everything else. We use these stats a lot for figuring out the cause of slow writes.
These stats got a bit out of date and are now categorizing some interesting things as "everything else", and also do some double counting. This PR fixes it and adds two new stats: time spent waiting for other threads of the batch group, and time spent waiting for scheduling flushes/compactions. Probably these will be enough to explain all the occasional abnormally slow (multiple seconds) writes that we're seeing.
Closes https://github.com/facebook/rocksdb/pull/3602
Differential Revision: D7251562
Pulled By: al13n321
fbshipit-source-id: 0a2d0f5a4fa5677455e1f566da931cb46efe2a0d
Summary:
This is a simpler version of #3097 by removing all unrelated changes.
Fixing the bug where concurrent writes may get Status::OK while it actually gets IOError on WAL write. This happens when multiple writes form a write batch group, and the leader get an IOError while writing to WAL. The leader failed to pass the error to followers in the group, and the followers end up returning Status::OK() while actually writing nothing. The bug only affect writes in a batch group. Future writes after the batch group will correctly return immediately with the IOError.
Closes https://github.com/facebook/rocksdb/pull/3201
Differential Revision: D6421644
Pulled By: yiwu-arbug
fbshipit-source-id: 1c2a455c5b73f6842423785eb8a9dbfbb191dc0e
Summary:
Recover txns from the WAL. Also added some unit tests.
Closes https://github.com/facebook/rocksdb/pull/2901
Differential Revision: D5859596
Pulled By: maysamyabandeh
fbshipit-source-id: 6424967b231388093b4effffe0a3b1b7ec8caeb0
Summary:
The test is failing occasionally on the assert: `ASSERT_TRUE(writer->state == WriteThread::State::STATE_INIT)`. This is because the test don't make the leader wait for long enough before updating state for its followers. The patch move the update to `threads_waiting` to the end of `WriteThread::JoinBatchGroup:Wait` callback to avoid this happening.
Also adding `WriteThread::JoinBatchGroup:Start` and have each thread wait there while another thread is linking to the linked-list. This is to make the check of `is_leader` more deterministic.
Also changing two while-loops of `compare_exchange_strong` to plain `fetch_add`, to make it look cleaner.
Closes https://github.com/facebook/rocksdb/pull/2640
Differential Revision: D5491525
Pulled By: yiwu-arbug
fbshipit-source-id: 6e897f122082bd6f98e6d51b31a25e5fd0a3fb82
Summary:
This reverts the previous commit 1d7048c598, which broke the build.
Did a `git revert 1d7048c`.
Closes https://github.com/facebook/rocksdb/pull/2627
Differential Revision: D5476473
Pulled By: sagar0
fbshipit-source-id: 4756ff5c0dfc88c17eceb00e02c36176de728d06
Summary: This uses `clang-tidy` to comment out unused parameters (in functions, methods and lambdas) in fbcode. Cases that the tool failed to handle are fixed manually.
Reviewed By: igorsugak
Differential Revision: D5454343
fbshipit-source-id: 5dee339b4334e25e963891b519a5aa81fbf627b2
Summary:
PipelineWriteImpl is an alternative approach to WriteImpl. In WriteImpl, only one thread is allow to write at the same time. This thread will do both WAL and memtable writes for all write threads in the write group. Pending writers wait in queue until the current writer finishes. In the pipeline write approach, two queue is maintained: one WAL writer queue and one memtable writer queue. All writers (regardless of whether they need to write WAL) will still need to first join the WAL writer queue, and after the house keeping work and WAL writing, they will need to join memtable writer queue if needed. The benefit of this approach is that
1. Writers without memtable writes (e.g. the prepare phase of two phase commit) can exit write thread once WAL write is finish. They don't need to wait for memtable writes in case of group commit.
2. Pending writers only need to wait for previous WAL writer finish to be able to join the write thread, instead of wait also for previous memtable writes.
Merging #2056 and #2058 into this PR.
Closes https://github.com/facebook/rocksdb/pull/2286
Differential Revision: D5054606
Pulled By: yiwu-arbug
fbshipit-source-id: ee5b11efd19d3e39d6b7210937b11cefdd4d1c8d
Summary:
The concept about early exit in write thread implementation is a confusing one. It means that if early exit is allowed, batch group leader will not responsible to exit the batch group, but the last finished writer do. In case we need to mark log synced, or encounter memtable insert error, early exit is disallowed.
This patch remove such a concept by:
* In all cases, the last finished writer (not necessary leader) is responsible to exit batch group.
* In case of parallel memtable write, leader will also mark log synced after memtable insert and before signal finish (call `CompleteParallelWorker()`). The purpose is to allow mark log synced (which require locking mutex) can run in parallel to memtable insert in other writers.
* The last finish writer should handle memtable insert error (update bg_error_) before exiting batch group.
Closes https://github.com/facebook/rocksdb/pull/2134
Differential Revision: D4869667
Pulled By: yiwu-arbug
fbshipit-source-id: aec170847c85b90f4179d6a4608a4fe1361544e3
Summary:
also did minor refactoring
Closes https://github.com/facebook/rocksdb/pull/2115
Differential Revision: D4855818
Pulled By: maysamyabandeh
fbshipit-source-id: fbca6ac57e5c6677fffe8354f7291e596a50cb77
Summary:
Refactor WriteImpl() so when I plug-in the pipeline write code (which is
an alternative approach for WriteThread), some of the logic can be
reuse. I split out the following methods from WriteImpl():
* PreprocessWrite()
* HandleWALFull() (previous MaybeFlushColumnFamilies())
* HandleWriteBufferFull()
* WriteToWAL()
Also adding a constructor to WriteThread::Writer, and move WriteContext into db_impl.h.
No real logic change in this patch.
Closes https://github.com/facebook/rocksdb/pull/2042
Differential Revision: D4781014
Pulled By: yiwu-arbug
fbshipit-source-id: d45ca18
Summary:
If concurrent memtable insert is enabled, and one prepare command and a normal command are grouped into a commit group, the sequence ID will be calculated incorrectly.
Closes https://github.com/facebook/rocksdb/pull/1730
Differential Revision: D4371081
Pulled By: siying
fbshipit-source-id: cd40c6d
Summary:
Multi-write thread may update the status of the parallel_group in
WriteThread::CompleteParallelWorker if the status of Writer is not ok!
When copy write status to the paralle_group, the write thread just hold the
mutex of the the writer processed by itself. it is useless. The thread
should held the the leader of the parallel_group instead.
Closes https://github.com/facebook/rocksdb/pull/1598
Differential Revision: D4252335
Pulled By: siying
fbshipit-source-id: 3864cf7
Summary:
If the WriteOptions.no_slowdown flag is set AND we need to wait or sleep for
the write request, then fail immediately with Status::Incomplete().
Closes https://github.com/facebook/rocksdb/pull/1527
Differential Revision: D4191405
Pulled By: maysamyabandeh
fbshipit-source-id: 7f3ce3f
Summary:
Add API to WriteBatch to store range deletions in its buffer
which are later added to memtable. In the WriteBatch buffer, a range
deletion is encoded as "<optype><CF ID (optional)><begin key><end key>".
With this diff, the range tombstones are stored inline with the data in
the memtable. It's useful for now because the test cases rely on the
data being accessible via memtable. My next step is to store range
tombstones in a separate area in the memtable.
Test Plan: unit tests
Reviewers: IslamAbdelRahman, sdong, wanning
Reviewed By: wanning
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61401
Summary:
copy from task 8196669:
1) Optimistic transactions do not support batching writes from different threads.
2) Pessimistic transactions do not support batching writes if an expiration time is set.
In these 2 cases, we currently do not do any write batching in DBImpl::WriteImpl() because there is a WriteCallback that could decide at the last minute to abort the write. But we could support batching write operations with callbacks if we make sure to process the callbacks correctly.
To do this, we would first need to modify write_thread.cc to stop preventing writes with callbacks from being batched together. Then we would need to change DBImpl::WriteImpl() to call all WriteCallback's in a batch, only write the batches that succeed, and correctly set the state of each batch's WriteThread::Writer.
Test Plan: Added test WriteWithCallbackTest to write_callback_test.cc which creates multiple client threads and verifies that writes are batched and executed properly.
Reviewers: hermanlee4, anthony, ngbronson
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52863
Summary:
myrocks seems to build rocksdb using
-Wmissing-field-initializers (and treats warnings as errors). This diff
adds that flag to the rocksdb build, and fixes the compilation failures
that result. I have not checked for any other differences in the build
flags for rocksdb build as part of myrocks.
Test Plan: make check
Reviewers: sdong, rven
Reviewed By: rven
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D52443
Summary: Fix some CLANG errors introduced in 7d87f02799
Test Plan: Build with both of CLANG and gcc
Reviewers: rven, yhchiang, kradhakrishnan, anthony, IslamAbdelRahman, ngbronson
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52329
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
Summary:
This patch fix a race condition in persisting options which will cause a crash when:
* Thread A obtain cf options and start to persist options based on that cf options.
* Thread B kicks in and finish DropColumnFamily and delete cf_handle.
* Thread A wakes up and tries to finish the persisting options and crashes.
Test Plan: Add a test in column_family_test that can reproduce the crash
Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51717
mpoeter