Summary:
Previously, range tombstones were accumulated from every level, which
was necessary if a range tombstone in a higher level covered a key in a lower
level. However, RangeDelAggregator::AddTombstones's complexity is based on
the number of tombstones that are currently stored in it, which is wasteful in
the Get case, where we only need to know the highest sequence number of range
tombstones that cover the key from higher levels, and compute the highest covering
sequence number at the current level. This change introduces this optimization, and
removes the use of RangeDelAggregator from the Get path.
In the benchmark results, the following command was used to initialize the database:
```
./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8
```
...and the following command was used to measure read throughput:
```
./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32
```
The filluniquerandom command was only run once, and the resulting database was used
to measure read performance before and after the PR. Both binaries were compiled with
`DEBUG_LEVEL=0`.
Readrandom results before PR:
```
readrandom : 4.544 micros/op 220090 ops/sec; 16.9 MB/s (63103 of 100000 found)
```
Readrandom results after PR:
```
readrandom : 11.147 micros/op 89707 ops/sec; 6.9 MB/s (63103 of 100000 found)
```
So it's actually slower right now, but this PR paves the way for future optimizations (see #4493).
----
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449
Differential Revision: D10370575
Pulled By: abhimadan
fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
Summary:
In fbcode when we build with clang7++, although -faligned-new is available in compile phase, we link with an older version of libstdc++.a and it doesn't come with aligned-new support (e.g. `nm libstdc++.a | grep align_val_t` return empty). In this case the previous -faligned-new detection can pass but will end up with link error. Fixing it by only have the detection for non-fbcode build.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4576
Differential Revision: D10500008
Pulled By: yiwu-arbug
fbshipit-source-id: b375de4fbb61d2a08e54ab709441aa8e7b4b08cf
Summary:
Introduce `RepeatableThread` utility to run task periodically in a separate thread. It is basically the same as the the same class in fbcode, and in addition provide a helper method to let tests mock time and trigger execution one at a time.
We can use this class to replace `TimerQueue` in #4382 and `BlobDB`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4423
Differential Revision: D10020932
Pulled By: yiwu-arbug
fbshipit-source-id: 3616bef108c39a33c92eedb1256de424b7c04087
Summary:
To measure the results of upcoming DeleteRange v2 work, this commit adds
simple benchmarks for RangeDelAggregator. It measures the average time
for AddTombstones and ShouldDelete calls.
Using this to compare the results before #4014 and on the latest master (using the default arguments) produces the following results:
Before #4014:
```
=======================
Results:
=======================
AddTombstones: 1356.28 us
ShouldDelete: 0.401732 us
```
Latest master:
```
=======================
Results:
=======================
AddTombstones: 740.82 us
ShouldDelete: 0.383271 us
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4363
Differential Revision: D9881676
Pulled By: abhimadan
fbshipit-source-id: 793e7d61aa4b9d47eb917bbcc03f08695b5e5442
Summary:
Before the fix:
On a PowerPC machine, run the following
```
$ make jtest
```
The command will fail due to "undefined symbol: crc32c_ppc". It was caused by
'rocksdbjava' Makefile target not including crc32c_ppc object files when
generating the shared lib. The fix is simple.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4357
Differential Revision: D9779474
Pulled By: riversand963
fbshipit-source-id: 3c5ec9068c2b9c796e6500f71cd900267064fd51
Summary:
Currently unity-test is failing because both trace_replay.cc and trace_analyzer_tool.cc defined `DecodeCFAndKey` under anonymous namespace. It is supposed to be fine except unity test will dump all source files together and now we have a conflict.
Another issue with trace_analyzer_tool.cc is that it is using some utility functions from ldb_cmd which is not included in Makefile for unity_test, I chose to update TESTHARNESS to include LIBOBJECTS. Feel free to comment if there is a less intrusive way to solve this.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4323
Differential Revision: D9599170
Pulled By: miasantreble
fbshipit-source-id: 38765b11f8e7de92b43c63bdcf43ea914abdc029
Summary:
Since bzip.org is no longer maintained, download the bzip2 packages from a snapshot taken by the internet archive until we figure out a more credible source.
Fixes issue: #4305
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4306
Differential Revision: D9514868
Pulled By: sagar0
fbshipit-source-id: 57c6a141a62e652f94377efc7ca9916b458e68d5
Summary:
Previously, the trace_analyzer_tool will be complied with other libobjects, which let the GFLAGS of trace_analyzer appear in other tools (e.g., db_bench, rocksdb_dump, and etc.). When using '--help', the help information of trace_analyzer will appear in other tool help information, which will cause confusion issues.
Currently, trace_analyzer_tool is built and used only by trace_analyzer and trace_analyzer_test to avoid the issues.
Tested with make asan_check.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4290
Differential Revision: D9413163
Pulled By: zhichao-cao
fbshipit-source-id: ed5d20c4575a53ca15ff62a2ffe601d5cf278cc4
Summary:
A framework of trace analyzing for RocksDB
After collecting the trace by using the tool of [PR #3837](https://github.com/facebook/rocksdb/pull/3837). User can use the Trace Analyzer to interpret, analyze, and characterize the collected workload.
**Input:**
1. trace file
2. Whole keys space file
**Statistics:**
1. Access count of each operation (Get, Put, Delete, SingleDelete, DeleteRange, Merge) in each column family.
2. Key hotness (access count) of each one
3. Key space separation based on given prefix
4. Key size distribution
5. Value size distribution if appliable
6. Top K accessed keys
7. QPS statistics including the average QPS and peak QPS
8. Top K accessed prefix
9. The query correlation analyzing, output the number of X after Y and the corresponding average time
intervals
**Output:**
1. key access heat map (either in the accessed key space or whole key space)
2. trace sequence file (interpret the raw trace file to line base text file for future use)
3. Time serial (The key space ID and its access time)
4. Key access count distritbution
5. Key size distribution
6. Value size distribution (in each intervals)
7. whole key space separation by the prefix
8. Accessed key space separation by the prefix
9. QPS of each operation and each column family
10. Top K QPS and their accessed prefix range
**Test:**
1. Added the unit test of analyzing Get, Put, Delete, SingleDelete, DeleteRange, Merge
2. Generated the trace and analyze the trace
**Implemented but not tested (due to the limitation of trace_replay):**
1. Analyzing Iterator, supporting Seek() and SeekForPrev() analyzing
2. Analyzing the number of Key found by Get
**Future Work:**
1. Support execution time analyzing of each requests
2. Support cache hit situation and block read situation of Get
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4091
Differential Revision: D9256157
Pulled By: zhichao-cao
fbshipit-source-id: f0ceacb7eedbc43a3eee6e85b76087d7832a8fe6
Summary:
Usually when using cscope, the query results contain a lot of function calls in test, making it hard to browse. So this PR aims to provide an option to exclude test source files.
Add a new PHONY target, tags0, to exclude test source files while using cscope.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4190
Differential Revision: D9015901
Pulled By: riversand963
fbshipit-source-id: ea9a45756ccff5b26344d37e9ff1c02c5d9736d6
Summary:
The first step of the `DataBlockHashIndex` implementation. A string based hash table is implemented and unit-tested.
`DataBlockHashIndexBuilder`: `Add()` takes pairs of `<key, restart_index>`, and formats it into a string when `Finish()` is called.
`DataBlockHashIndex`: initialized by the formatted string, and can interpret it as a hash table. Lookup for a key is supported by iterator operation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4139
Reviewed By: sagar0
Differential Revision: D8866764
Pulled By: fgwu
fbshipit-source-id: 7f015f0098632c65979a22898a50424384730b10
Summary:
The transactions are currently tested with and without using StackableDB. This is mostly to check that the code path is consistent with stackable db as well. Slow, stress tests however do not benefit from being run again with StackableDB. The patch excludes StackableDB from such tests.
On a single core it reduced the runtime of transaction_test from 199s to 135s.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4132
Differential Revision: D8841655
Pulled By: maysamyabandeh
fbshipit-source-id: 7b9aaba2673b542b195439dfb306cef26bd63b19
Summary:
Currently, if RocksDB encounters errors during a write operation (user requested or BG operations), it sets DBImpl::bg_error_ and fails subsequent writes. This PR allows the DB to be resumed for certain classes of errors. It consists of 3 parts -
1. Introduce Status::Severity in rocksdb::Status to indicate whether a given error can be recovered from or not
2. Refactor the error handling code so that setting bg_error_ and deciding on severity is in one place
3. Provide an API for the user to clear the error and resume the DB instance
This whole change is broken up into multiple PRs. Initially, we only allow clearing the error for Status::NoSpace() errors during background flush/compaction. Subsequent PRs will expand this to include more errors and foreground operations such as Put(), and implement a polling mechanism for out-of-space errors.
Closes https://github.com/facebook/rocksdb/pull/3997
Differential Revision: D8653831
Pulled By: anand1976
fbshipit-source-id: 6dc835c76122443a7668497c0226b4f072bc6afd
Summary:
Pinned the alignment of StatisticsData to the cacheline size rather than just extending its size (which could go over two cache lines)if unaligned in allocation.
Avoid compile errors in the process as per individual commit messages.
strengthen static_assert to CACHELINE rather than the highest common multiple.
Closes https://github.com/facebook/rocksdb/pull/4036
Differential Revision: D8582844
Pulled By: yiwu-arbug
fbshipit-source-id: 363c37029f28e6093e06c60b987bca9aa204bc71
Summary:
As titled.
I have not extended the Compatibility tests because the new WAL markers are still unimplemented.
Closes https://github.com/facebook/rocksdb/pull/3941
Differential Revision: D8238394
Pulled By: lth
fbshipit-source-id: 980e3d44837bbf2cfa64047f9738f559dfac4b1d
Summary:
Before this PR, Iterator/InternalIterator may simultaneously have non-ok status() and Valid() = true. That state means that the last operation failed, but the iterator is nevertheless positioned on some unspecified record. Likely intended uses of that are:
* If some sst files are corrupted, a normal iterator can be used to read the data from files that are not corrupted.
* When using read_tier = kBlockCacheTier, read the data that's in block cache, skipping over the data that is not.
However, this behavior wasn't documented well (and until recently the wiki on github had misleading incorrect information). In the code there's a lot of confusion about the relationship between status() and Valid(), and about whether Seek()/SeekToLast()/etc reset the status or not. There were a number of bugs caused by this confusion, both inside rocksdb and in the code that uses rocksdb (including ours).
This PR changes the convention to:
* If status() is not ok, Valid() always returns false.
* Any seek operation resets status. (Before the PR, it depended on iterator type and on particular error.)
This does sacrifice the two use cases listed above, but siying said it's ok.
Overview of the changes:
* A commit that adds missing status checks in MergingIterator. This fixes a bug that actually affects us, and we need it fixed. `DBIteratorTest.NonBlockingIterationBugRepro` explains the scenario.
* Changes to lots of iterator types to make all of them conform to the new convention. Some bug fixes along the way. By far the biggest changes are in DBIter, which is a big messy piece of code; I tried to make it less big and messy but mostly failed.
* A stress-test for DBIter, to gain some confidence that I didn't break it. It does a few million random operations on the iterator, while occasionally modifying the underlying data (like ForwardIterator does) and occasionally returning non-ok status from internal iterator.
To find the iterator types that needed changes I searched for "public .*Iterator" in the code. Here's an overview of all 27 iterator types:
Iterators that didn't need changes:
* status() is always ok(), or Valid() is always false: MemTableIterator, ModelIter, TestIterator, KVIter (2 classes with this name anonymous namespaces), LoggingForwardVectorIterator, VectorIterator, MockTableIterator, EmptyIterator, EmptyInternalIterator.
* Thin wrappers that always pass through Valid() and status(): ArenaWrappedDBIter, TtlIterator, InternalIteratorFromIterator.
Iterators with changes (see inline comments for details):
* DBIter - an overhaul:
- It used to silently skip corrupted keys (`FindParseableKey()`), which seems dangerous. This PR makes it just stop immediately after encountering a corrupted key, just like it would for other kinds of corruption. Let me know if there was actually some deeper meaning in this behavior and I should put it back.
- It had a few code paths silently discarding subiterator's status. The stress test caught a few.
- The backwards iteration code path was expecting the internal iterator's set of keys to be immutable. It's probably always true in practice at the moment, since ForwardIterator doesn't support backwards iteration, but this PR fixes it anyway. See added DBIteratorTest.ReverseToForwardBug for an example.
- Some parts of backwards iteration code path even did things like `assert(iter_->Valid())` after a seek, which is never a safe assumption.
- It used to not reset status on seek for some types of errors.
- Some simplifications and better comments.
- Some things got more complicated from the added error handling. I'm open to ideas for how to make it nicer.
* MergingIterator - check status after every operation on every subiterator, and in some places assert that valid subiterators have ok status.
* ForwardIterator - changed to the new convention, also slightly simplified.
* ForwardLevelIterator - fixed some bugs and simplified.
* LevelIterator - simplified.
* TwoLevelIterator - changed to the new convention. Also fixed a bug that would make SeekForPrev() sometimes silently ignore errors from first_level_iter_.
* BlockBasedTableIterator - minor changes.
* BlockIter - replaced `SetStatus()` with `Invalidate()` to make sure non-ok BlockIter is always invalid.
* PlainTableIterator - some seeks used to not reset status.
* CuckooTableIterator - tiny code cleanup.
* ManagedIterator - fixed some bugs.
* BaseDeltaIterator - changed to the new convention and fixed a bug.
* BlobDBIterator - seeks used to not reset status.
* KeyConvertingIterator - some small change.
Closes https://github.com/facebook/rocksdb/pull/3810
Differential Revision: D7888019
Pulled By: al13n321
fbshipit-source-id: 4aaf6d3421c545d16722a815b2fa2e7912bc851d
Summary:
We were seeing the following error: "ThreadSanitizer: DenseSlabAllocator overflow. Dying."
It is fixable by mmap'ing a smaller region for keys' expected values, which this PR achieves by reducing the number of keys.
Closes https://github.com/facebook/rocksdb/pull/3803
Differential Revision: D7874478
Pulled By: ajkr
fbshipit-source-id: 433939f5cb92410ab4777d540cb0cc2ee0fe6c2e
Summary:
This PR comments out the rest of the unused arguments which allow us to turn on the -Wunused-parameter flag. This is the second part of a codemod relating to https://github.com/facebook/rocksdb/pull/3557.
Closes https://github.com/facebook/rocksdb/pull/3662
Differential Revision: D7426121
Pulled By: Dayvedde
fbshipit-source-id: 223994923b42bd4953eb016a0129e47560f7e352
Summary:
Possible interleaved execution of background compaction thread calling `FindObsoleteFiles (no full scan) / PurgeObsoleteFiles` and user thread calling `FindObsoleteFiles (full scan) / PurgeObsoleteFiles` can lead to race condition on which RocksDB attempts to delete a file twice. The second attempt will fail and return `IO error`. This may occur to other files, but this PR targets sst.
Also add a unit test to verify that this PR fixes the issue.
The newly added unit test `obsolete_files_test` has a test case for this scenario, implemented in `ObsoleteFilesTest#RaceForObsoleteFileDeletion`. `TestSyncPoint`s are used to coordinate the interleaving the `user_thread` and background compaction thread. They execute as follows
```
timeline user_thread background_compaction thread
t1 | FindObsoleteFiles(full_scan=false)
t2 | FindObsoleteFiles(full_scan=true)
t3 | PurgeObsoleteFiles
t4 | PurgeObsoleteFiles
V
```
When `user_thread` invokes `FindObsoleteFiles` with full scan, it collects ALL files in RocksDB directory, including the ones that background compaction thread have collected in its job context. Then `user_thread` will see an IO error when trying to delete these files in `PurgeObsoleteFiles` because background compaction thread has already deleted the file in `PurgeObsoleteFiles`.
To fix this, we make RocksDB remember which (SST) files have been found by threads after calling `FindObsoleteFiles` (see `DBImpl#files_grabbed_for_purge_`). Therefore, when another thread calls `FindObsoleteFiles` with full scan, it will not collect such files.
ajkr could you take a look and comment? Thanks!
Closes https://github.com/facebook/rocksdb/pull/3638
Differential Revision: D7384372
Pulled By: riversand963
fbshipit-source-id: 01489516d60012e722ee65a80e1449e589ce26d3
Summary:
I found that each instance of MySQLStyleTransactionTest.TransactionStressTest/x is taking more than 10 hours to complete on our continuous testing environment, causing the whole valgrind run to timeout after a day. So excluding these tests.
Closes https://github.com/facebook/rocksdb/pull/3652
Differential Revision: D7400332
Pulled By: sagar0
fbshipit-source-id: 987810574506d01487adf7c2de84d4817ec3d22d
Summary:
I modified the Makefile so that we can compile rocksdb on OpenBSD.
The instructions for building have been added to INSTALL.md.
The whole compilation process works fine like this on OpenBSD-current
Closes https://github.com/facebook/rocksdb/pull/3617
Differential Revision: D7323754
Pulled By: siying
fbshipit-source-id: 990037d1cc69138d22f85bd77ef4dc8c1ba9edea
Summary:
In original $ROCKSDB_HOME/Makefile, the command used to generate ctags is
```
ctags * -R
```
However, this failed to generate tags for me.
I did some search on the usage of ctags command and found that it should be
```
ctags -R .
```
or
```
ctags -R *
```
After the change, I can find the tags in vim using `:ts <identifier>`.
Closes https://github.com/facebook/rocksdb/pull/3626
Reviewed By: ajkr
Differential Revision: D7320217
Pulled By: riversand963
fbshipit-source-id: e4cd8f8a67842370a2343f0213df3cbd07754111
Summary:
https://blog.github.com/2018-02-23-weak-cryptographic-standards-removed/
Github dropped supporting some weak cryptographic protocols from their website couple of weeks ago which cause our vagrant build process to fail on curl downloading step. This diff force curl use tls v1.2 protocol if it is supported so that it does not rely on the default protocol on different systems.
Closes https://github.com/facebook/rocksdb/pull/3561
Differential Revision: D7148575
Pulled By: wpc
fbshipit-source-id: b8cecfdfeb2bc8236de2d0d14f044532befec98c
Summary:
Now we suppress alignment UBSAN error as a whole. Suppressing 3-way CRC and murmurhash feels a better idea than turning off alignment check as a whole.
Closes https://github.com/facebook/rocksdb/pull/3495
Differential Revision: D6971273
Pulled By: siying
fbshipit-source-id: 080b59fed6df494b9f622ef7cb5d42d39e6a8cdf
Summary:
…db_test
options_settable_test won't pass UBSAN so disable it.
blob_db_test fails in UBSAN as SnapshotList doesn't initialize all the fields in dummy snapshot. Fix it. I don't understand why only blob_db_test fails though.
Closes https://github.com/facebook/rocksdb/pull/3477
Differential Revision: D6928681
Pulled By: siying
fbshipit-source-id: e31dd300fcdecdfd4f6af279a0987fd0cdec5122
Summary:
Disable alignment check in UBSAN for now. Now we can't get signals to meaningful failures. We can reenable it after we figure out how we can suppress failures in finer grain manner.
Closes https://github.com/facebook/rocksdb/pull/3473
Differential Revision: D6925971
Pulled By: siying
fbshipit-source-id: a0f1a242cde866abbc5c1eeee9ff8d1d7d582ac4
Summary:
By default if ubsan detects any problem, it outputs a “runtime error:” message, and in most cases continues executing the program.
In order to make test abort on errors, option `-fno-sanitize-recover` is needed. [link](https://clang.llvm.org/docs/UndefinedBehaviorSanitizer.html)
Closes https://github.com/facebook/rocksdb/pull/3447
Differential Revision: D6854654
Pulled By: miasantreble
fbshipit-source-id: c48e892b0b38307029df38a67adda0e24257e481
Summary:
Java static builds are again broken, this time due Snappy version upgrade introduced in 90c1d81975 (#3331).
This is due to two reasons:
1. The new Snappy packages should now be downloaded from https://github.com/google/snappy/archive/<pkg.tar.gz> instead of https://github.com/google/snappy/releases/download/<pkg.tar.gz> which we are using now.
1. In addition to the the above URL change, Snappy changed its build from using autotools to CMake based : e69d9f8806/README.md (L65-L72)
So more changes are needed if we are going to upgrade to 1.1.7. Hence reverting the version upgrade until we figure them out.
Closes https://github.com/facebook/rocksdb/pull/3363
Differential Revision: D6716983
Pulled By: sagar0
fbshipit-source-id: f451a1bc5eb0bb090f4da07bc3e5ba72cf89aefa
Summary:
Java build on PPC64le has been broken since a few months, due to #2716. Fixing it with the least amount of changes.
(We should cleanup a little around this code when time permits).
This should fix the build failures seen in http://140.211.168.68:8080/job/Rocksdb/ .
Closes https://github.com/facebook/rocksdb/pull/3359
Differential Revision: D6712938
Pulled By: sagar0
fbshipit-source-id: 3046e8f072180693de2af4762934ec1ace309ca4
Summary:
With the ZSTD dictionary generator support added in #3057
`PORTABLE=1 ROCKSDB_NO_FBCODE=1 make rocksdbjavastatic` fails as it can't find zdict.h. Specifically due to:
e3a06f12d2/util/compression.h (L39)
In java static builds zstd code gets directly downloaded from https://github.com/facebook/zstd , and in there zdict.h is under dictBuilder directory. So, I modified libzstd.a target to use `make install` to collect all the header files into a single location and used that as the zstd's include path.
Closes https://github.com/facebook/rocksdb/pull/3260
Differential Revision: D6669850
Pulled By: sagar0
fbshipit-source-id: f8a7562a670e5aed4c4fb6034a921697590d7285
Summary:
added support for C and asm files as required for e612e31740.
Closes https://github.com/facebook/rocksdb/pull/3299
Differential Revision: D6612479
Pulled By: ajkr
fbshipit-source-id: 6263ed7c1602f249460421825c76b5721f396163
Summary:
**# Summary**
RocksDB uses SSE crc32 intrinsics to calculate the crc32 values but it does it in single way fashion (not pipelined on single CPU core). Intel's whitepaper () published an algorithm that uses 3-way pipelining for the crc32 intrinsics, then use pclmulqdq intrinsic to combine the values. Because pclmulqdq has overhead on its own, this algorithm will show perf gains on buffers larger than 216 bytes, which makes RocksDB a perfect user, since most of the buffers RocksDB call crc32c on is over 4KB. Initial db_bench show tremendous CPU gain.
This change uses the 3-way SSE algorithm by default. The old SSE algorithm is now behind a compiler tag NO_THREEWAY_CRC32C. If user compiles the code with NO_THREEWAY_CRC32C=1 then the old SSE Crc32c algorithm would be used. If the server does not have SSE4.2 at the run time the slow way (Non SSE) will be used.
**# Performance Test Results**
We ran the FillRandom and ReadRandom benchmarks in db_bench. ReadRandom is the point of interest here since it calculates the CRC32 for the in-mem buffers. We did 3 runs for each algorithm.
Before this change the CRC32 value computation takes about 11.5% of total CPU cost, and with the new 3-way algorithm it reduced to around 4.5%. The overall throughput also improved from 25.53MB/s to 27.63MB/s.
1) ReadRandom in db_bench overall metrics
PER RUN
Algorithm | run | micros/op | ops/sec |Throughput (MB/s)
3-way | 1 | 4.143 | 241387 | 26.7
3-way | 2 | 3.775 | 264872 | 29.3
3-way | 3 | 4.116 | 242929 | 26.9
FastCrc32c|1 | 4.037 | 247727 | 27.4
FastCrc32c|2 | 4.648 | 215166 | 23.8
FastCrc32c|3 | 4.352 | 229799 | 25.4
AVG
Algorithm | Average of micros/op | Average of ops/sec | Average of Throughput (MB/s)
3-way | 4.01 | 249,729 | 27.63
FastCrc32c | 4.35 | 230,897 | 25.53
2) Crc32c computation CPU cost (inclusive samples percentage)
PER RUN
Implementation | run | TotalSamples | Crc32c percentage
3-way | 1 | 4,572,250,000 | 4.37%
3-way | 2 | 3,779,250,000 | 4.62%
3-way | 3 | 4,129,500,000 | 4.48%
FastCrc32c | 1 | 4,663,500,000 | 11.24%
FastCrc32c | 2 | 4,047,500,000 | 12.34%
FastCrc32c | 3 | 4,366,750,000 | 11.68%
**# Test Plan**
make -j64 corruption_test && ./corruption_test
By default it uses 3-way SSE algorithm
NO_THREEWAY_CRC32C=1 make -j64 corruption_test && ./corruption_test
make clean && DEBUG_LEVEL=0 make -j64 db_bench
make clean && DEBUG_LEVEL=0 NO_THREEWAY_CRC32C=1 make -j64 db_bench
Closes https://github.com/facebook/rocksdb/pull/3173
Differential Revision: D6330882
Pulled By: yingsu00
fbshipit-source-id: 8ec3d89719533b63b536a736663ca6f0dd4482e9
Summary:
The TSAN version of tests could take quite long. Make the buck tests parallel to avoid timeouts.
Closes https://github.com/facebook/rocksdb/pull/3280
Differential Revision: D6581594
Pulled By: maysamyabandeh
fbshipit-source-id: 3f8476d8c69f0183e394fa8a2089dd8d4e90c90c
Summary:
Add ROCKSDB_VALGRIND_RUN macro and suppress false-positive "unimplemented functionality" throw by valgrind for steam hints.
Another approach would be add a valgrind suppress file. Valgrind is suppose to print the suppression when given "--gen-suppressions=all" param, which is suppose to be the content for the suppression file. But it doesn't print.
Closes https://github.com/facebook/rocksdb/pull/3174
Differential Revision: D6338786
Pulled By: yiwu-arbug
fbshipit-source-id: 3559efa5f3b92d40d09ad6ac82bc7b59f86c75aa
Summary:
The current implementation of PinnableSlice move assignment have an issue #3163. We are moving away from it instead of try to get the move assignment right, since it is too tricky.
Closes https://github.com/facebook/rocksdb/pull/3164
Differential Revision: D6319201
Pulled By: yiwu-arbug
fbshipit-source-id: 8f3279021f3710da4a4caa14fd238ed2df902c48
Summary:
Dynamic adjustment of rate limit according to demand for background I/O. It increases by a factor when limiter is drained too frequently, and decreases by the same factor when limiter is not drained frequently enough. The parameters for this behavior are fixed in `GenericRateLimiter::Tune`. Other changes:
- make rate limiter's `Env*` configurable for testing
- track num drain intervals in RateLimiter so we don't have to rely on stats, which may be shared across different DB instances from the ones that share the RateLimiter.
Closes https://github.com/facebook/rocksdb/pull/2899
Differential Revision: D5858704
Pulled By: ajkr
fbshipit-source-id: cc2bac30f85e7f6fd63655d0a6732ef9ed7403b1
Summary:
Make SnapshotConcurrentAccessTest run in the beginning of the queue.
Test Plan
`make all check -j64` on devserver
Closes https://github.com/facebook/rocksdb/pull/2962
Differential Revision: D5965871
Pulled By: yiwu-arbug
fbshipit-source-id: 8cb5a47c2468be0fbbb929226a143ec5848bfaa9
Summary:
Add kTypeBlobIndex value type, which will be used by blob db only, to insert a (key, blob_offset) KV pair. The purpose is to
1. Make it possible to open existing rocksdb instance as blob db. Existing value will be of kTypeIndex type, while value inserted by blob db will be of kTypeBlobIndex.
2. Make rocksdb able to detect if the db contains value written by blob db, if so return error.
3. Make it possible to have blob db optionally store value in SST file (with kTypeValue type) or as a blob value (with kTypeBlobIndex type).
The root db (DBImpl) basically pretended kTypeBlobIndex are normal value on write. On Get if is_blob is provided, return whether the value read is of kTypeBlobIndex type, or return Status::NotSupported() status if is_blob is not provided. On scan allow_blob flag is pass and if the flag is true, return wether the value is of kTypeBlobIndex type via iter->IsBlob().
Changes on blob db side will be in a separate patch.
Closes https://github.com/facebook/rocksdb/pull/2886
Differential Revision: D5838431
Pulled By: yiwu-arbug
fbshipit-source-id: 3c5306c62bc13bb11abc03422ec5cbcea1203cca
Summary:
This enables us to crossbuild pcc64le RocksJava binaries with a suitably old version of glibc (2.17) on CentOS 7.
Closes https://github.com/facebook/rocksdb/pull/2491
Differential Revision: D5955301
Pulled By: sagar0
fbshipit-source-id: 69ef9746f1dc30ffde4063dc764583d8c7ae937e
Abhishek Madan