Summary:
The very old sst formats do not have table_properties and rep_->table_properties is thus nullptr. The recent patch in https://github.com/facebook/rocksdb/pull/3894 does not check for nullptr and hence makes it backward incompatible. This patch adds the check.
Closes https://github.com/facebook/rocksdb/pull/3918
Differential Revision: D8188638
Pulled By: maysamyabandeh
fbshipit-source-id: b1d986665ecf0b4d1c442adfa8a193b97707d47b
Summary:
Index blocks have the same format as data blocks. The keys therefore similarly to the keys in the data blocks are internal keys, which means that in addition to the user key it also has 8 bytes that encodes sequence number and value type. This extra 8 bytes however is not necessary in index blocks since the index keys act as an separator between two data blocks. The only exception is when the last key of a block and the first key of the next block share the same user key, in which the sequence number is required to act as a separator.
The patch excludes the sequence from index keys only if the above special case does not happen for any of the index keys. It then records that in the property block. The reader looks at the property block to see if it should expect sequence numbers in the keys of the index block.s
Closes https://github.com/facebook/rocksdb/pull/3894
Differential Revision: D8118775
Pulled By: maysamyabandeh
fbshipit-source-id: 915479f028b5799ca91671d67455ecdefbd873bd
Summary:
This was missed in a refactor of `ReadBlockContents` (2f1a3a4).
Closes https://github.com/facebook/rocksdb/pull/3906
Differential Revision: D8172648
Pulled By: ajkr
fbshipit-source-id: 27e453b19795fea974bfed4721105be6f3a12090
Summary:
Currently when ldb built from master tries to open a DB from version 2.2, there will be a segfault because table_properties didn't exist back then.
Closes https://github.com/facebook/rocksdb/pull/3890
Differential Revision: D8100914
Pulled By: miasantreble
fbshipit-source-id: b255e8aedc54695432be2e704839c857dabdd65a
Summary:
Currently it is not possible to change bloom filter config without restart the db, which is causing a lot of operational complexity for users.
This PR aims to make it possible to dynamically change bloom filter config.
Closes https://github.com/facebook/rocksdb/pull/3601
Differential Revision: D7253114
Pulled By: miasantreble
fbshipit-source-id: f22595437d3e0b86c95918c484502de2ceca120c
Summary:
Before this PR, Iterator/InternalIterator may simultaneously have non-ok status() and Valid() = true. That state means that the last operation failed, but the iterator is nevertheless positioned on some unspecified record. Likely intended uses of that are:
* If some sst files are corrupted, a normal iterator can be used to read the data from files that are not corrupted.
* When using read_tier = kBlockCacheTier, read the data that's in block cache, skipping over the data that is not.
However, this behavior wasn't documented well (and until recently the wiki on github had misleading incorrect information). In the code there's a lot of confusion about the relationship between status() and Valid(), and about whether Seek()/SeekToLast()/etc reset the status or not. There were a number of bugs caused by this confusion, both inside rocksdb and in the code that uses rocksdb (including ours).
This PR changes the convention to:
* If status() is not ok, Valid() always returns false.
* Any seek operation resets status. (Before the PR, it depended on iterator type and on particular error.)
This does sacrifice the two use cases listed above, but siying said it's ok.
Overview of the changes:
* A commit that adds missing status checks in MergingIterator. This fixes a bug that actually affects us, and we need it fixed. `DBIteratorTest.NonBlockingIterationBugRepro` explains the scenario.
* Changes to lots of iterator types to make all of them conform to the new convention. Some bug fixes along the way. By far the biggest changes are in DBIter, which is a big messy piece of code; I tried to make it less big and messy but mostly failed.
* A stress-test for DBIter, to gain some confidence that I didn't break it. It does a few million random operations on the iterator, while occasionally modifying the underlying data (like ForwardIterator does) and occasionally returning non-ok status from internal iterator.
To find the iterator types that needed changes I searched for "public .*Iterator" in the code. Here's an overview of all 27 iterator types:
Iterators that didn't need changes:
* status() is always ok(), or Valid() is always false: MemTableIterator, ModelIter, TestIterator, KVIter (2 classes with this name anonymous namespaces), LoggingForwardVectorIterator, VectorIterator, MockTableIterator, EmptyIterator, EmptyInternalIterator.
* Thin wrappers that always pass through Valid() and status(): ArenaWrappedDBIter, TtlIterator, InternalIteratorFromIterator.
Iterators with changes (see inline comments for details):
* DBIter - an overhaul:
- It used to silently skip corrupted keys (`FindParseableKey()`), which seems dangerous. This PR makes it just stop immediately after encountering a corrupted key, just like it would for other kinds of corruption. Let me know if there was actually some deeper meaning in this behavior and I should put it back.
- It had a few code paths silently discarding subiterator's status. The stress test caught a few.
- The backwards iteration code path was expecting the internal iterator's set of keys to be immutable. It's probably always true in practice at the moment, since ForwardIterator doesn't support backwards iteration, but this PR fixes it anyway. See added DBIteratorTest.ReverseToForwardBug for an example.
- Some parts of backwards iteration code path even did things like `assert(iter_->Valid())` after a seek, which is never a safe assumption.
- It used to not reset status on seek for some types of errors.
- Some simplifications and better comments.
- Some things got more complicated from the added error handling. I'm open to ideas for how to make it nicer.
* MergingIterator - check status after every operation on every subiterator, and in some places assert that valid subiterators have ok status.
* ForwardIterator - changed to the new convention, also slightly simplified.
* ForwardLevelIterator - fixed some bugs and simplified.
* LevelIterator - simplified.
* TwoLevelIterator - changed to the new convention. Also fixed a bug that would make SeekForPrev() sometimes silently ignore errors from first_level_iter_.
* BlockBasedTableIterator - minor changes.
* BlockIter - replaced `SetStatus()` with `Invalidate()` to make sure non-ok BlockIter is always invalid.
* PlainTableIterator - some seeks used to not reset status.
* CuckooTableIterator - tiny code cleanup.
* ManagedIterator - fixed some bugs.
* BaseDeltaIterator - changed to the new convention and fixed a bug.
* BlobDBIterator - seeks used to not reset status.
* KeyConvertingIterator - some small change.
Closes https://github.com/facebook/rocksdb/pull/3810
Differential Revision: D7888019
Pulled By: al13n321
fbshipit-source-id: 4aaf6d3421c545d16722a815b2fa2e7912bc851d
Summary:
When the dummy record insertion fails, there is no need to explicitly delete the block as it will be registered for cleanup regardless.
Closes https://github.com/facebook/rocksdb/pull/3688
Differential Revision: D7537741
Pulled By: miasantreble
fbshipit-source-id: fcd3a3d3d382ee8e2c7ced0a4980e683d93a16d6
Summary:
7a6353bd1c prevents empty filter blocks from being written for SST files containing range deletions only. However the assertion this PR removes is still a problem as we could be reading from a DB generated by a RocksDB build without the 7a6353bd1c patch. So remove the assertion. We already don't do this check when `cache_index_and_filter_blocks=false`, so it should be safe.
Closes https://github.com/facebook/rocksdb/pull/3773
Differential Revision: D7769964
Pulled By: ajkr
fbshipit-source-id: 7285762446f2cd2ccf16efd7a988a106fbb0d8d3
Summary:
Currently the partitioned index iterator creates a new ReadOptions which ignores the fill_cache config set to ReadOptions passed by the user. The patch propagates fill_cache from the user's ReadOptions to that of partition index iterator.
Also it clarifies the contract of fill_cache that i) it does not apply to filters, ii) it still charges block cache for the size of the data block, it still pin the block if it is already in the block cache.
Closes https://github.com/facebook/rocksdb/pull/3739
Differential Revision: D7678308
Pulled By: maysamyabandeh
fbshipit-source-id: 53ed96424ae922e499e2d4e3580ddc3f0db893da
Summary:
this PR fixes a few failed contbuild:
1. ASAN memory leak in Block::NewIterator (table/block.cc:429). the proper destruction of first_level_iter_ and second_level_iter_ of two_level_iterator.cc is missing from the code after the refactoring in https://github.com/facebook/rocksdb/pull/3406
2. various unused param errors introduced by https://github.com/facebook/rocksdb/pull/3662
3. updated comment for `ForceReleaseCachedEntry` to emphasize the use of `force_erase` flag.
Closes https://github.com/facebook/rocksdb/pull/3718
Reviewed By: maysamyabandeh
Differential Revision: D7621192
Pulled By: miasantreble
fbshipit-source-id: 476c94264083a0730ded957c29de7807e4f5b146
Summary:
Adds two stats to allow us measuring the false positive rate of full filters:
- The total count of positives: rocksdb.bloom.filter.full.positive
- The total count of true positives: rocksdb.bloom.filter.full.true.positive
Not the term "full" in the stat name to indicate that they are meaningful in full filters. block-based filters are to be deprecated soon and supporting it is not worth the the additional cost of if-then-else branches.
Closes#3680
Tested by:
$ ./db_bench -benchmarks=fillrandom -db /dev/shm/rocksdb-tmpdb --num=1000000 -bloom_bits=10
$ ./db_bench -benchmarks="readwhilewriting" -db /dev/shm/rocksdb-tmpdb --statistics -bloom_bits=10 --duration=60 --num=2000000 --use_existing_db 2>&1 > /tmp/full.log
$ grep filter.full /tmp/full.log
rocksdb.bloom.filter.full.positive COUNT : 3628593
rocksdb.bloom.filter.full.true.positive COUNT : 3536026
which gives the false positive rate of 2.5%
Closes https://github.com/facebook/rocksdb/pull/3681
Differential Revision: D7517570
Pulled By: maysamyabandeh
fbshipit-source-id: 630ab1a473afdce404916d297035b6318de4c052
Summary:
In attempting to build a static lib for use in iOS, I ran in to lots of type errors between uint64_t and size_t. This PR contains the changes I made to get `TARGET_OS=IOS make static_lib` to succeed while also getting Xcode to build successfully with the resulting `librocksdb.a` library imported.
This also compiles for me on macOS and tests fine, but I'm really not sure if I made the correct decisions about where to `static_cast` and where to change types.
Also up for discussion: is iOS worth supporting? Getting the static lib is just part one, we aren't providing any bridging headers or wrappers like the ObjectiveRocks project, it won't be a great experience.
Closes https://github.com/facebook/rocksdb/pull/3503
Differential Revision: D7106457
Pulled By: gfosco
fbshipit-source-id: 82ac2073de7e1f09b91f6b4faea91d18bd311f8e
Summary:
Use a customzied BlockBasedTableIterator and LevelIterator to replace current implementations leveraging two-level-iterator. Hope the customized logic will make code easier to understand. As a side effect, BlockBasedTableIterator reduces the allocation for the data block iterator object, and avoid the virtual function call to it, because we can directly reference BlockIter, a final class. Similarly, LevelIterator reduces virtual function call to the dummy iterator iterating the file metadata. It also enabled further optimization.
The upper bound check is also moved from index block to data block. This implementation fits this iterator better. After the change, forwared iterator is slightly optimized to ensure we trim those iterators.
The two-level-iterator now is only used by partitioned index, so it is simplified.
Closes https://github.com/facebook/rocksdb/pull/3406
Differential Revision: D6809041
Pulled By: siying
fbshipit-source-id: 7da3b9b1d3c8e9d9405302c15920af1fcaf50ffa
Summary:
`ReadBlockFromFile` uses a stack buffer to hold small data blocks before passing them to the compression library, which outputs uncompressed data in a heap buffer. In the case of `kNoCompression` there is a `memcpy` to copy from stack buffer to heap buffer.
This PR optimizes `ReadBlockFromFile` to skip the stack buffer for files whose blocks are known to be uncompressed. We determine this using the SST file property, "compression_name", if it's available.
Closes https://github.com/facebook/rocksdb/pull/3472
Differential Revision: D6920848
Pulled By: ajkr
fbshipit-source-id: 5c753e804efc178b9229ae5dbe6a4adc32031f07
Summary:
Previously `ReadBlockFromFile` for data blocks was only measured when reading a block to populate block cache. This PR adds the corresponding measurements for users who disabled block cache.
Closes https://github.com/facebook/rocksdb/pull/3442
Differential Revision: D6848671
Pulled By: ajkr
fbshipit-source-id: bb4bbe1797fa2cc1d9a5bad44891af2b55384b41
Summary:
ReadOptions.fill_cache is set in compaction inputs and can be set by users in their queries too. It tells RocksDB not to put a data block used to block cache.
The memory used by the data block is, however, not trackable by users.
To make the system more manageable, we can cost the block to block cache while using it, and then release it after using.
Closes https://github.com/facebook/rocksdb/pull/3333
Differential Revision: D6670230
Pulled By: miasantreble
fbshipit-source-id: ab848d3ed286bd081a13ee1903de357b56cbc308
Summary:
This change improves the performance of iterators doing long range scans (e.g. big/full table scans in MyRocks) by using readahead and prefetching additional data on each disk IO. This prefetching is automatically enabled on noticing more than 2 IOs for the same table file during iteration. The readahead size starts with 8KB and is exponentially increased on each additional sequential IO, up to a max of 256 KB. This helps in cutting down the number of IOs needed to complete the range scan.
Constraints:
- The prefetched data is stored by the OS in page cache. So this currently works only for non direct-reads use-cases i.e applications which use page cache. (Direct-I/O support will be enabled in a later PR).
- This gets currently enabled only when ReadOptions.readahead_size = 0 (which is the default value).
Thanks to siying for the original idea and implementation.
**Benchmarks:**
Data fill:
```
TEST_TMPDIR=/data/users/$USER/benchmarks/iter ./db_bench -benchmarks=fillrandom -num=1000000000 -compression_type="none" -level_compaction_dynamic_level_bytes
```
Do a long range scan: Seekrandom with large number of nexts
```
TEST_TMPDIR=/data/users/$USER/benchmarks/iter ./db_bench -benchmarks=seekrandom -duration=60 -num=1000000000 -use_existing_db -seek_nexts=10000 -statistics -histogram
```
Page cache was cleared before each experiment with the command:
```
sudo sh -c "echo 3 > /proc/sys/vm/drop_caches"
```
```
Before:
seekrandom : 34020.945 micros/op 29 ops/sec; 32.5 MB/s (1636 of 1999 found)
With this change:
seekrandom : 8726.912 micros/op 114 ops/sec; 126.8 MB/s (5702 of 6999 found)
```
~3.9X performance improvement.
Also verified with strace and gdb that the readahead size is increasing as expected.
```
strace -e readahead -f -T -t -p <db_bench process pid>
```
Closes https://github.com/facebook/rocksdb/pull/3282
Differential Revision: D6586477
Pulled By: sagar0
fbshipit-source-id: 8a118a0ed4594fbb7f5b1cafb242d7a4033cb58c
Summary:
This is a pre-cleaning up before a major block based table iterator refactoring. BlockBasedTable::NewDataBlockIterator() will always return BlockIter. This simplifies the logic and code and enable further refactoring and optimization.
Closes https://github.com/facebook/rocksdb/pull/3398
Differential Revision: D6780165
Pulled By: siying
fbshipit-source-id: 273f7dc896724f682c0118fb69a359d9cc4418b4
Summary:
Re-use metadata for reading Compression Dictionary on BlockBased
table open, this saves two reads from disk.
This helps to our 999 percentile in 5.6.1 where prefetch buffer is not present.
Closes https://github.com/facebook/rocksdb/pull/3354
Differential Revision: D6695753
Pulled By: ajkr
fbshipit-source-id: bb8acd9e9e66e65b89c548ab8940570ae360333c
Summary:
Divide ReadBlockContents() to multiple sub-functions. Maintaining the input and intermediate data in a new class BlockFetcher.
I hope in general it makes the code easier to maintain.
Another motivation to do it is to clearly divide the logic before file reading and after file reading. The refactor will help us evaluate how can we make I/O async in the future.
Closes https://github.com/facebook/rocksdb/pull/3244
Differential Revision: D6520983
Pulled By: siying
fbshipit-source-id: 338d90bc0338472d46be7a7682028dc9114b12e9
Summary:
The ASCII output is almost always useless to me as the first '\0' byte in the key or value causes it to stop printing. Since all characters are already surrounded by spaces, "\ 0" (how we display a backslash followed by a zero) and "\0" (how this PR displays a null terminator) are distinguishable. My assumption is the value of seeing all the bytes outweighs the value of the alignment we had before, where we always had one character followed by one space.
Closes https://github.com/facebook/rocksdb/pull/3203
Differential Revision: D6428651
Pulled By: ajkr
fbshipit-source-id: aafc978a51e9ea029cfe3e763e2bb0e1751b9ccf
Summary:
When using with compressed cache it is possible that the status is ok but the block is not actually added to the block cache. The patch takes this case into account.
Closes https://github.com/facebook/rocksdb/pull/2945
Differential Revision: D5937613
Pulled By: maysamyabandeh
fbshipit-source-id: 5428cf1115e5046b3d01ab78d26cb181122af4c6
Summary:
A user encountered segfault on the call to `CacheDependencies()`, probably because `NewIndexIterator()` failed before populating `*index_entry`. Let's avoid the call in that case.
Closes https://github.com/facebook/rocksdb/pull/2939
Differential Revision: D5928611
Pulled By: ajkr
fbshipit-source-id: 484be453dbb00e5e160e9c6a1bc933df7d80f574
Summary:
This is the warning that clang considers a bug and has been causing it to fail:
```
table/block_based_table_reader.cc:240:27: warning: Potential leak of memory pointed to by 'block.value'
for (; biter.Valid(); biter.Next()) {
^~~~~
```
Actually clang just doesn't have enough knowledge to statically determine it's safe. We can teach it using an assert.
Closes https://github.com/facebook/rocksdb/pull/2779
Differential Revision: D5691225
Pulled By: ajkr
fbshipit-source-id: 3f0d545bf44636953b30ee5243c63239e8f16d8e
Summary:
This is the continuation of https://github.com/facebook/rocksdb/pull/2661 for filter partitions. When pin_l0 is set (along with cache_xxx), then open table open the filter partitions are loaded into the cache and pinned there.
Closes https://github.com/facebook/rocksdb/pull/2766
Differential Revision: D5671098
Pulled By: maysamyabandeh
fbshipit-source-id: 174f24018f1d7f1129621e7380287b65b67d2115
Summary:
This fixes the existing logic for pinning l0 index partitions. The patch preloads the partitions into block cache and pin them if they belong to level 0 and pin_l0 is set.
The drawback is that it does many small IOs when preloading all the partitions into the cache is direct io is enabled. Working for a solution for that.
Closes https://github.com/facebook/rocksdb/pull/2661
Differential Revision: D5554010
Pulled By: maysamyabandeh
fbshipit-source-id: 1e6f32a3524d71355c77d4138516dcfb601ca7b2
Summary:
Right now, if direct I/O is enabled, prefetching the last 512KB cannot be applied, except compaction inputs or readahead is enabled for iterators. This can create a lot of I/O for HDD cases. To solve the problem, the 512KB is prefetched in block based table if direct I/O is enabled. The prefetched buffer is passed in totegher with random access file reader, so that we try to read from the buffer before reading from the file. This can be extended in the future to support flexible user iterator readahead too.
Closes https://github.com/facebook/rocksdb/pull/2708
Differential Revision: D5593091
Pulled By: siying
fbshipit-source-id: ee36ff6d8af11c312a2622272b21957a7b5c81e7
Summary:
We need a tool to check any sst file corruption in the db.
It will check all the sst files in current version and read all the blocks (data, meta, index) with checksum verification. If any verification fails, the function will return non-OK status.
Closes https://github.com/facebook/rocksdb/pull/2498
Differential Revision: D5324269
Pulled By: lightmark
fbshipit-source-id: 6f8a272008b722402a772acfc804524c9d1a483b
Summary:
Breaking commit: d12691b86f
In the above commit, I moved the `TableCache` cleanup logic from `Version` destructor into `PurgeObsoleteFiles`. I missed cleaning up `TableCache` entries for the current `Version` during DB destruction.
This PR adds that logic to `VersionSet` destructor. One unfortunate side effect is now we're potentially deleting `TableReader`s after `column_family_set_.reset()`, which means we can't call `BlockBasedTableReader::Close` a second time as the block cache might already be destroyed.
Closes https://github.com/facebook/rocksdb/pull/2662
Differential Revision: D5515108
Pulled By: ajkr
fbshipit-source-id: 2cb820e19aa813e0d258d17f76b2d7b6b7ee0b18
Summary:
This reverts the previous commit 1d7048c598, which broke the build.
Did a `git revert 1d7048c`.
Closes https://github.com/facebook/rocksdb/pull/2627
Differential Revision: D5476473
Pulled By: sagar0
fbshipit-source-id: 4756ff5c0dfc88c17eceb00e02c36176de728d06
Summary: This uses `clang-tidy` to comment out unused parameters (in functions, methods and lambdas) in fbcode. Cases that the tool failed to handle are fixed manually.
Reviewed By: igorsugak
Differential Revision: D5454343
fbshipit-source-id: 5dee339b4334e25e963891b519a5aa81fbf627b2
Summary:
When Partitioning index/filter is enabled the user might need to check the index block size as well as the top-level index size via sst_dump. This patch records i) number of partitions, ii) top-level index size and make it accessible through sst_dump. The number of partitions for filters is the same as that of indexes. The top-level index for filters has a similar size to top-level index for indexes, so it is not repeated.
Closes https://github.com/facebook/rocksdb/pull/2437
Differential Revision: D5224225
Pulled By: maysamyabandeh
fbshipit-source-id: 5324598c75793523aef1bb7ee225a5475e95a9cb
Summary:
BlockBasedTable::compaction_optimized_ is never used but can cause TSAN warning. Remove it.
Closes https://github.com/facebook/rocksdb/pull/2324
Differential Revision: D5085533
Pulled By: siying
fbshipit-source-id: 2feefce6806d559dfb4ab2989aa3db36752fe25d
Summary:
Based on my experience with linkbench, We should not skip loading bloom filter blocks when they are not available in block cache when using Iterator::Seek
Actually I am not sure why this behavior existed in the first place
Closes https://github.com/facebook/rocksdb/pull/2255
Differential Revision: D5010721
Pulled By: maysamyabandeh
fbshipit-source-id: 0af545a06ac4baeecb248706ec34d009c2480ca4
Summary:
Any non-raw-data dependent object must be destructed before the table
closes. There was a bug of not doing that for filter object. This patch
fixes the bug and adds a unit test to prevent such bugs in future.
Closes https://github.com/facebook/rocksdb/pull/2246
Differential Revision: D5001318
Pulled By: maysamyabandeh
fbshipit-source-id: 6d8772e58765485868094b92964da82ef9730b6d
Summary:
Now if we have iterate_upper_bound set, we continue read until get a key >= upper_bound. For a lot of cases that neighboring data blocks have a user key gap between them, our index key will be a user key in the middle to get a shorter size. For example, if we have blocks:
[a b c d][f g h]
Then the index key for the first block will be 'e'.
then if upper bound is any key between 'd' and 'e', for example, d1, d2, ..., d99999999999, we don't have to read the second block and also know that we have done our iteration by reaching the last key that smaller the upper bound already.
This diff can reduce RA in most cases.
Closes https://github.com/facebook/rocksdb/pull/2239
Differential Revision: D4990693
Pulled By: lightmark
fbshipit-source-id: ab30ea2e3c6edf3fddd5efed3c34fcf7739827ff
Summary:
Some filters such as partitioned filter have pointers to the table for which they are created. Therefore is they are stored in the block cache, the should be forcibly erased from block cache before closing the table, which would result into deleting the object. Otherwise the destructor will be called later when the cache is lazily erasing the object, which having the parent table no longer existent it could result into undefined behavior.
Update: there will be still cases the filter is not removed from the cache since the table has not kept a pointer to the cache handle to be able to forcibly release it later. We make sure that the filter destructor does not access the table pointer to get around such cases.
Closes https://github.com/facebook/rocksdb/pull/2207
Differential Revision: D4941591
Pulled By: maysamyabandeh
fbshipit-source-id: 56fbab2a11cf447e1aa67caa30b58d7bd7ce5bbd
Summary:
prefetch some data from the end of the file for each compaction to reduce IO.
Closes https://github.com/facebook/rocksdb/pull/2149
Differential Revision: D4880576
Pulled By: lightmark
fbshipit-source-id: aa767cd1afc84c541837fbf1ad6c0d45b34d3932
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
Summary:
Fixes#1961 which causes a segfault when filter_policy is nullptr and both
pin_l0_filter_and_index_blocks_in_cache/cache_index_and_filter_blocks
are set.
Closes https://github.com/facebook/rocksdb/pull/2029
Differential Revision: D4764862
Pulled By: maysamyabandeh
fbshipit-source-id: 05bd695
Maysam Yabandeh