Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505
Reviewed By: pdillinger
Differential Revision: D29619283
Pulled By: bjlemaire
fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
Summary:
Add google benchmark for microbench.
Add ribbon_bench for benchmark ribbon filter vs. other filters.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8493
Test Plan:
added test to CI
To run the benchmark on devhost:
Install benchmark: `$ sudo dnf install google-benchmark-devel`
Build and run:
`$ ROCKSDB_NO_FBCODE=1 DEBUG_LEVEL=0 make microbench`
or with cmake:
`$ mkdir build && cd build && cmake .. -DCMAKE_BUILD_TYPE=Release -DWITH_BENCHMARK=1 && make microbench`
Reviewed By: pdillinger
Differential Revision: D29589649
Pulled By: jay-zhuang
fbshipit-source-id: 8fed13b562bef4472f161ecacec1ab6b18911dff
Summary:
… small overwritten files.
If a file is overwritten with renamed and the parent path is not synced, FaultInjectionTestFS::DeleteFilesCreatedAfterLastDirSync() will delete the file. However, RocksDB relies on file renaming to be atomic no matter whether the parent directory is synced or not, and the current behavior breaks the assumption and caused some false positive: https://github.com/facebook/rocksdb/pull/8489
Since the atomic renaming is used in CURRENT files, to fix the problem, in FaultInjectionTestFS::DeleteFilesCreatedAfterLastDirSync(), we recover the state of overwritten file if the file is small.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8501
Test Plan: Run stress test for a while and see it doesn't break.
Reviewed By: anand1976
Differential Revision: D29594384
fbshipit-source-id: 589b5c2f0a9d2aca53752d7bdb0231efa5b3ae92
Summary:
Various tests had disabled valgrind due to it slowing down and timing
out (as is the case right now) the CI runs. Where a test was disabled with no comment,
I assumed slowness was the cause. For these tests that were slow under
valgrind, as well as the ones identified in https://github.com/facebook/rocksdb/issues/8352, this PR moves them
behind the compiler flag `-DROCKSDB_FULL_VALGRIND_RUN`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8475
Test Plan: running `make full_valgrind_test`, `make valgrind_test`, `make check`; will verify they appear working correctly
Reviewed By: jay-zhuang
Differential Revision: D29504843
Pulled By: ajkr
fbshipit-source-id: 2aac90749cfbd30d5ce11cb29a07a1b9314eeea7
Summary:
Previously, the following command:
```USE_CLANG=1 TEST_TMPDIR=/dev/shm/rocksdb OPT=-g make -j$(nproc) analyze```
was raising an error/warning the new_mem could potentially be a `nullptr`. This error appeared due to code changes from https://github.com/facebook/rocksdb/issues/8454, including an if-statement containing "`... && new_mem != nullptr && ...`", which made the analyzer believe that past this `if`-statement, a `new_mem==nullptr` was a possible scenario.
This code patch simply introduces `assert`s and removes this condition in the `if`-statement.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8492
Reviewed By: jay-zhuang
Differential Revision: D29571275
Pulled By: bjlemaire
fbshipit-source-id: 75d72246b70ebbbae7dea11ccb5778686d8bcbea
Summary:
```TestFSWritableFile``` buffers data in ```Append``` in order to simulate unsynced data loss on crash. This is only required for buffered IO and should be disabled for direct IO. Otherwise, it causes crash tests to assert on the buffer address alignment - ```db_stress: env/io_posix.cc:1194: virtual rocksdb::IOStatus rocksdb::PosixWritableFile::Append(const rocksdb::Slice&, const rocksdb::IOOptions&, rocksdb::IODebugContext*): Assertion `IsSectorAligned(data.data(), GetRequiredBufferAlignment())' failed.```.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8490
Reviewed By: zhichao-cao
Differential Revision: D29565080
Pulled By: anand1976
fbshipit-source-id: 682831fd66ed3b9597caa74fc453e22dfaf9b973
Summary:
Write and metadata error injection during DB open was enabled in https://github.com/facebook/rocksdb/issues/8474. This causes crash tests to fail very frequently due to another fault injection feature that deletes files created after the last dir sync during DB open. In real life, a similar failure would happen if the FS returns error on the CURRENT file rename, but the rename actually succeeded and got partially persisted (dir entry for the old CURRENT file got removed, but the entry for the new one is not persisted). Temporarily disable the fault injection feature until we figure out the likelihood of this bug happening and the proper way to fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8489
Test Plan: Stress test can open the DB successfully
Reviewed By: siying
Differential Revision: D29564516
Pulled By: anand1976
fbshipit-source-id: ffd1650715ea3c5bf7131936b0ca6fcf66f4e14e
Summary:
Inject read failures in DB reopen, just as what we do for metadata writes and writes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8476
Test Plan: Some manual tests and make sure failures are triggered.
Reviewed By: anand1976
Differential Revision: D29507283
fbshipit-source-id: d04da0163973447041038bd87701686a417c4e0c
Summary:
We ended up using a different approach for tracking the amount of
garbage in blob files (see e.g. https://github.com/facebook/rocksdb/pull/8450),
so the ability to apply only a range of table property collectors is
now unnecessary. The patch reverts this part of
https://github.com/facebook/rocksdb/pull/8298 while keeping the cleanup done
in that PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8465
Test Plan: `make check`
Reviewed By: jay-zhuang
Differential Revision: D29399921
Pulled By: ltamasi
fbshipit-source-id: af64816c357d0829b9d7ba8ca1477038138f6f0a
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454
Reviewed By: anand1976
Differential Revision: D29433971
Pulled By: bjlemaire
fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
Summary:
add the injest_error_severity to control if it is a retryable IO Error or a fatal or unrecoverable error. Use a flag to indicate, if fatal error comes, the flag is set and db is stopped (but not corrupted).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8479
Test Plan: run ./db_stress --reopen=0 --read_fault_one_in=1000 --write_fault_one_in=5 --disable_wal=true --write_buffer_size=3000000 -writepercent=5 -readpercent=50 --injest_error_severity=2 --column_families=1, make check
Reviewed By: anand1976
Differential Revision: D29524271
Pulled By: zhichao-cao
fbshipit-source-id: 1aa9fb9b5655b0adba6f5ad12005ca8c074c795b
Summary:
Add a new test ```fbcode_crash_test``` to rocksdb-lego-determinator. This test allows the crash test to be run on Facebook Sandcastle infra using fbcode components. Also use the default Env in db_stress to access the expected values path as it requires a memory mapped file and may not work with custom Envs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8471
Reviewed By: ajkr
Differential Revision: D29474722
Pulled By: anand1976
fbshipit-source-id: 7d086d82dd7091ae48e08cb4ace763ce3e3b87ef
Summary:
Previously Stress can inject metadata write failures when reopening a DB. We extend it to file append too, in the same way.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8474
Test Plan: manually run crash test with various setting and make sure the failures are triggered as expected.
Reviewed By: zhichao-cao
Differential Revision: D29503116
fbshipit-source-id: e73a446e80ccbd09301a579280e56ff949381fab
Summary:
Added the Customizable::ConfigureNewObject method. The method will configure the object if options are found and invoke PrepareOptions if the flag is set properly.
Added tests to test that PrepareOptions is properly called and to test if PrepareOptions fails.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8468
Reviewed By: zhichao-cao
Differential Revision: D29494703
Pulled By: mrambacher
fbshipit-source-id: d5767dee5d7a98620ac66190262101cd0aa9d2b7
Summary:
When the secondary cache lookup fails, we may still allocate a handle and charge the cache for metadata usage. If the cache is full, this can cause the usage to go over capacity. Later, when a (unrelated) handle is released, it trips up an assertion that checks that usage is less than capacity. To prevent this assertion failure, don't charge the cache for a failed secondary cache lookup.
Tests:
Run crash_test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8470
Reviewed By: zhichao-cao
Differential Revision: D29474713
Pulled By: anand1976
fbshipit-source-id: 27191969c95470a7b070d292b458efce71395bf2
Summary:
Change the job_id for remote compaction interface, which will include
both internal compaction job_id, also a sub_compaction_job_id. It is not
a backward compatible change. The user needs to update interface during
upgrade. (We will avoid backward incompatible change after the feature is
not experimental.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8364
Reviewed By: ajkr
Differential Revision: D28917301
Pulled By: jay-zhuang
fbshipit-source-id: 6d72a21f652bb517ad6954d0387b496797fc4e11
Summary:
Original author: kraj (https://github.com/facebook/rocksdb/issues/8413)
We have a hack to ensure clang's `posix_memalign()` hack works to be
compatible with glibc's `posix_memalign()` declaration. Our side of the
hack is irrelevant and should be omitted when not using glibc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8425
Reviewed By: mrambacher
Differential Revision: D29239029
Pulled By: ajkr
fbshipit-source-id: 12b900f50a4823b880a6558f25d8590dbfc0aa26
Summary:
Allow using WindowsThread with Mingw
Most Mingw builds require Posix threads in order to use std::thread.
As per https://github.com/facebook/rocksdb/issues/7764, this is not always the case.
That being considered, we're going to improve the Mingw thread model
checks.
Closes: https://github.com/facebook/rocksdb/issues/7764
Signed-off-by: Lucian Petrut <lpetrut@cloudbasesolutions.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8108
Reviewed By: jay-zhuang
Differential Revision: D27365778
Pulled By: mrambacher
fbshipit-source-id: 2c15b1f04ae90e1e3a25a33e86ceb779224a9529
Summary:
If a Customizable option was not mutable, it would still appear in the list of mutable options when serialized. This meant that when the immutable options were used to configure another immutable object, an "option not changeable" status would be returned.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8457
Reviewed By: zhichao-cao
Differential Revision: D29428298
Pulled By: mrambacher
fbshipit-source-id: 3945b0b822f8e5955a7c5590fe64dfd5bc1fe6a0
Summary:
Added BlobMetaData to ColumnFamilyMetaData and LiveBlobMetaData and DB API GetLiveBlobMetaData to retrieve it.
First pass at struct. More tests and maybe fields to come...
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8273
Reviewed By: ltamasi
Differential Revision: D29102400
Pulled By: mrambacher
fbshipit-source-id: 8a2383a4446328be6b91dced9841fdd3dfc80b73
Summary:
Add a ```-secondary_cache_uri``` to db_stress to allow the user to specify a custom ```SecondaryCache``` object from the object registry. Also allow db_crashtest.py to be run with an alternate db_stress location. Together, these changes will allow us to run db_stress using FB internal components.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8455
Reviewed By: zhichao-cao
Differential Revision: D29371972
Pulled By: anand1976
fbshipit-source-id: dd1b1fd80ebbedc11aa63d9246ea6ae49edb77c4
Summary:
In PR https://github.com/facebook/rocksdb/issues/7523 , checksum handoff is introduced in RocksDB for WAL, Manifest, and SST files. When user enable checksum handoff for a certain type of file, before the data is written to the lower layer storage system, we calculate the checksum (crc32c) of each piece of data and pass the checksum down with the data, such that data verification can be down by the lower layer storage system if it has the capability. However, it cannot cover the whole lifetime of the data in the memory and also it potentially introduces extra checksum calculation overhead.
In this PR, we introduce a new interface in WritableFileWriter::Append, which allows the caller be able to pass the data and the checksum (crc32c) together. In this way, WritableFileWriter can directly use the pass-in checksum (crc32c) to generate the checksum of data being passed down to the storage system. It saves the calculation overhead and achieves higher protection coverage. When a new checksum is added with the data, we use Crc32cCombine https://github.com/facebook/rocksdb/issues/8305 to combine the existing checksum and the new checksum. To avoid the segmenting of data by rate-limiter before it is stored, rate-limiter is called enough times to accumulate enough credits for a certain write. This design only support Manifest and WAL which use log_writer in the current stage.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8412
Test Plan: make check, add new testing cases.
Reviewed By: anand1976
Differential Revision: D29151545
Pulled By: zhichao-cao
fbshipit-source-id: 75e2278c5126cfd58393c67b1efd18dcc7a30772
Summary:
Provide support for Merge operation with base values during
Compaction in IntegratedBlobDB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8445
Test Plan: Add new unit test
Reviewed By: ltamasi
Differential Revision: D29343949
Pulled By: akankshamahajan15
fbshipit-source-id: 844f6f02f93388a11e6e08bda7bb3a2a28e47c70
Summary:
The patch builds on `BlobGarbageMeter` and `BlobCountingIterator`
(introduced in https://github.com/facebook/rocksdb/issues/8426 and
https://github.com/facebook/rocksdb/issues/8443 respectively)
and ties it all together. It measures the amount of garbage
generated by a compaction and logs the corresponding `BlobFileGarbage`
records as part of the compaction job's `VersionEdit`. Note: in order
to have accurate results, `kRemoveAndSkipUntil` for compaction filters
is implemented using iteration.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8450
Test Plan: Ran `make check` and the crash test script.
Reviewed By: jay-zhuang
Differential Revision: D29338207
Pulled By: ltamasi
fbshipit-source-id: 4381c432ac215139439f6d6fb801a6c0e4d8c128
Summary:
Hello and thanks for RocksDB,
Here is a PR to add file deletes, renames and ```Flush()```, ```Sync()```, ```Fsync()``` and ```Close()``` to file ops report.
The reason is to help tune RocksDB options when using an env/filesystem with high latencies for file level ("metadata") operations, typically seen during ```DB::Open``` (```db_bench -num 0``` also see https://github.com/facebook/rocksdb/pull/7203 where IOTracing does not trace ```DB::Open```).
Before:
```
> db_bench -benchmarks updaterandom -num 0 -report_file_operations true
...
Entries: 0
...
Num files opened: 12
Num Read(): 6
Num Append(): 8
Num bytes read: 6216
Num bytes written: 6289
```
After:
```
> db_bench -benchmarks updaterandom -num 0 -report_file_operations true
...
Entries: 0
...
Num files opened: 12
Num files deleted: 3
Num files renamed: 4
Num Flush(): 10
Num Sync(): 5
Num Fsync(): 1
Num Close(): 2
Num Read(): 6
Num Append(): 8
Num bytes read: 6216
Num bytes written: 6289
```
Before:
```
> db_bench -benchmarks updaterandom -report_file_operations true
...
Entries: 1000000
...
Num files opened: 18
Num Read(): 396339
Num Append(): 1000058
Num bytes read: 892030224
Num bytes written: 187569238
```
After:
```
> db_bench -benchmarks updaterandom -report_file_operations true
...
Entries: 1000000
...
Num files opened: 18
Num files deleted: 5
Num files renamed: 4
Num Flush(): 1000068
Num Sync(): 9
Num Fsync(): 1
Num Close(): 6
Num Read(): 396339
Num Append(): 1000058
Num bytes read: 892030224
Num bytes written: 187569238
```
Another example showing how using ```DB::OpenForReadOnly``` reduces file operations compared to ```((Optimistic)Transaction)DB::Open```:
```
> db_bench -benchmarks updaterandom -num 1
> db_bench -benchmarks updaterandom -num 0 -use_existing_db true -readonly true -report_file_operations true
...
Entries: 0
...
Num files opened: 8
Num files deleted: 0
Num files renamed: 0
Num Flush(): 0
Num Sync(): 0
Num Fsync(): 0
Num Close(): 0
Num Read(): 13
Num Append(): 0
Num bytes read: 374
Num bytes written: 0
```
```
> db_bench -benchmarks updaterandom -num 1
> db_bench -benchmarks updaterandom -num 0 -use_existing_db true -report_file_operations true
...
Entries: 0
...
Num files opened: 14
Num files deleted: 3
Num files renamed: 4
Num Flush(): 14
Num Sync(): 5
Num Fsync(): 1
Num Close(): 3
Num Read(): 11
Num Append(): 10
Num bytes read: 7291
Num bytes written: 7357
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8448
Reviewed By: anand1976
Differential Revision: D29333818
Pulled By: zhichao-cao
fbshipit-source-id: a06a8c87f799806462319115195b3e94faf5f542
Summary:
`VersionSet::VerifyCompactionFileConsistency` was superseded by the LSM tree
consistency checks introduced in https://github.com/facebook/rocksdb/pull/6901,
which are more comprehensive, more efficient, and are performed unconditionally
even in release builds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8449
Test Plan: `make check`
Reviewed By: ajkr
Differential Revision: D29337441
Pulled By: ltamasi
fbshipit-source-id: a05324f88e3400e27e6a00406c878a6276e0c9cc
Summary:
Follow-up to https://github.com/facebook/rocksdb/issues/8426 .
The patch adds a new kind of `InternalIterator` that wraps another one and
passes each key-value encountered to `BlobGarbageMeter` as inflow.
This iterator will be used as an input iterator for compactions when the input
SSTs reference blob files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8443
Test Plan: `make check`
Reviewed By: jay-zhuang
Differential Revision: D29311987
Pulled By: ltamasi
fbshipit-source-id: b4493b4c0c0c2e3c2ecc33c8969a5ef02de5d9d8
Summary:
Add an argument to ldb to dump live file names, column families, and levels, `list_live_files_metadata`. The output shows all active SST file names, sorted first by column family and then by level. For each level the SST files are sorted alphabetically.
Typically, the output looks like this:
```
./ldb --db=/tmp/test_db list_live_files_metadata
Live SST Files:
===== Column Family: default =====
---------- level 0 ----------
/tmp/test_db/000069.sst
---------- level 1 ----------
/tmp/test_db/000064.sst
/tmp/test_db/000065.sst
/tmp/test_db/000066.sst
/tmp/test_db/000071.sst
---------- level 2 ----------
/tmp/test_db/000038.sst
/tmp/test_db/000039.sst
/tmp/test_db/000052.sst
/tmp/test_db/000067.sst
/tmp/test_db/000070.sst
------------------------------
```
Second, a flag was added `--sort_by_filename`, to change the layout of the output. When this flag is added to the command, the output shows all active SST files sorted by name, in front of which the LSM level and the column family are mentioned. With the same example, the following command would return:
```
./ldb --db=/tmp/test_db list_live_files_metadata --sort_by_filename
Live SST Files:
/tmp/test_db/000038.sst : level 2, column family 'default'
/tmp/test_db/000039.sst : level 2, column family 'default'
/tmp/test_db/000052.sst : level 2, column family 'default'
/tmp/test_db/000064.sst : level 1, column family 'default'
/tmp/test_db/000065.sst : level 1, column family 'default'
/tmp/test_db/000066.sst : level 1, column family 'default'
/tmp/test_db/000067.sst : level 2, column family 'default'
/tmp/test_db/000069.sst : level 0, column family 'default'
/tmp/test_db/000070.sst : level 2, column family 'default'
/tmp/test_db/000071.sst : level 1, column family 'default'
------------------------------
```
Thus, the user can either request to show the files by levels, or sorted by filenames.
This PR includes a simple Python unit test that makes sure the file name and level printed out by this new feature matches the one found with an existing feature, `dump_live_file`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8446
Reviewed By: akankshamahajan15
Differential Revision: D29320080
Pulled By: bjlemaire
fbshipit-source-id: 01fb7b5637c59010d74c80730a28d815994e7009
Summary:
This test case has been failing occasionally due to automatic
compactions kicking in, resulting in GC generating additional
blob files that the test did not expect. Disabling automatic
compactions to get rid of this flakiness.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8444
Test Plan: `gtest-parallel --repeat=1000 ./blob_db_test --gtest_filter="BlobDBTest.SnapshotAndGarbageCollection"`
Reviewed By: jay-zhuang
Differential Revision: D29316987
Pulled By: ltamasi
fbshipit-source-id: 9815d189ed7d63890622768675a01990e3680221
Summary:
At the moment, the following command : "`./ --db=mypath/ dump_file_files`" returns a series of erronous names with double slashes, ie: "`mypath//000xxx.sst`", including manifest file names with double slashes "`mypath//MANIFEST-00XXX`", whereas "`./ --db=mypath dump_file_files`" correctly returns "`mypath/000xxx.sst`" and "`mypath/MANIFEST-00XXX`".
This (very short) PR simply checks if there is a need to add or remove any '`/`' character when the `db_path` and `manifest_filename`/sst `filenames` are concatenated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8439
Reviewed By: akankshamahajan15
Differential Revision: D29301349
Pulled By: bjlemaire
fbshipit-source-id: 3e9e58f9749d278b654ae838fcee13ad698705a8
Summary:
This reverts commit 25be1ed66a.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8438
Test Plan: Run the impacted mysql test 40 times
Reviewed By: ajkr
Differential Revision: D29286247
Pulled By: jay-zhuang
fbshipit-source-id: d3bd056971a19a8b012d5d0295fa045c012b3c04
Summary:
`git diff origin/6.21.fb origin/6.22.fb -- HISTORY.md` looked odd.
This PR fixes it up by moving items from 6.21.0 to 6.22.0 that were
never in any 6.21 release. Also mentioned the background stat collection
fix under 6.22 (previously it was mentioned under 6.21 patch releases
only).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8441
Reviewed By: jay-zhuang
Differential Revision: D29304812
Pulled By: ajkr
fbshipit-source-id: 2a928a9518a1d6615321d5c2d1e22b17cbb59093
Summary:
Currently, blob file checksums are incorrectly dumped as raw bytes
in the `ldb manifest_dump` output (i.e. they are not printed as hex).
The patch fixes this and also updates some test cases to reflect that
the checksum value field in `BlobFileAddition` and `SharedBlobFileMetaData`
contains the raw checksum and not a hex string.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8437
Test Plan:
`make check`
Tested using `ldb manifest_dump`
Reviewed By: akankshamahajan15
Differential Revision: D29284170
Pulled By: ltamasi
fbshipit-source-id: d11cfb3435b14cd73c8a3d3eb14fa0f9fa1d2228
Summary:
`DeleteFilesInRange()` marks deleting files to `being_compacted`
before deleting, which may cause ongoing compactions report corruption
exception or ASSERT for debug build.
Adding the missing `ComputeCompactionScore()` when `being_compacted` is set.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8434
Test Plan: Unittest
Reviewed By: ajkr
Differential Revision: D29276127
Pulled By: jay-zhuang
fbshipit-source-id: f5b223e3c1fc6d821e100e3f3442bc70c1d50cf7
Summary:
This is part of an alternative approach to https://github.com/facebook/rocksdb/issues/8316.
Unlike that approach, this one relies on key-values getting processed one by one
during compaction, and does not involve persistence.
Specifically, the patch adds a class `BlobGarbageMeter` that can track the number
and total size of blobs in a (sub)compaction's input and output on a per-blob file
basis. This information can then be used to compute the amount of additional
garbage generated by the compaction for any given blob file by subtracting the
"outflow" from the "inflow."
Note: this patch only adds `BlobGarbageMeter` and associated unit tests. I plan to
hook up this class to the input and output of `CompactionIterator` in a subsequent PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8426
Test Plan: `make check`
Reviewed By: jay-zhuang
Differential Revision: D29242250
Pulled By: ltamasi
fbshipit-source-id: 597e50ad556540e413a50e804ba15bc044d809bb
Summary:
Tsan complains due to a perceived race condition in accessing LRUHandle flags. One thread calls ```LRUHandle::SetHit()``` from ```LRUCacheShard::Lookup()```, while another thread calls ```LRUHandle::IsPending()``` from ```LRUCacheShard::IsReady()```. The latter call is from ```MultiGet```. It doesn't actually have to call ```IsReady``` since a null value indicates the cache handle is not ready, so its sufficient to check for a null value.
Also modify ```IsReady``` to acquire the LRU shard mutex.
Tests:
1. make check
2. Run tsan_crash
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8433
Reviewed By: zhichao-cao
Differential Revision: D29278030
Pulled By: anand1976
fbshipit-source-id: 0c9fed56d12eda853e72dadebe75038361bd257f
Baptiste Lemaire