Summary: Will use iterators to verify keys in the db for half of its keys and Gets for the other half.
Test Plan: ./db_stress --max_key=1000 --ops_per_thread=100
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13227
Summary: Using an iterator instead of the Get method, each thread goes through a portion of the database and verifies values by comparing to the shared state.
Test Plan:
./db_stress --db=/tmp/tmppp --max_key=10000 --ops_per_thread=10000
To test some basic cases, the following lines can be added (each set in turn) to the verifyDb method with the following expected results:
// Should abort with "Unexpected value found"
shared.Delete(start);
// Should abort with "Value not found"
WriteOptions write_opts;
db_->Delete(write_opts, Key(start));
// Should succeed
WriteOptions write_opts;
shared.Delete(start);
db_->Delete(write_opts, Key(start));
// Should abort with "Value not found"
WriteOptions write_opts;
db_->Delete(write_opts, Key(start + (end-start)/2));
// Should abort with "Value not found"
db_->Delete(write_opts, Key(end-1));
// Should abort with "Unexpected value"
shared.Delete(end-1);
// Should abort with "Unexpected value"
shared.Delete(start + (end-start)/2);
// Should abort with "Value not found"
db_->Delete(write_opts, Key(start));
shared.Delete(start);
db_->Delete(write_opts, Key(end-1));
db_->Delete(write_opts, Key(end-2));
To test the out of range abort, change the key in the for loop to Key(i+1), so that the key defined by the index i is now outside of the supposed range of the database.
Reviewers: emayanke
Reviewed By: emayanke
CC: dhruba, xjin
Differential Revision: https://reviews.facebook.net/D13071
Summary: Adding in the iterpercent flag to tests.
Test Plan: make crash_test
Reviewers: emayanke
Reviewed By: emayanke
Differential Revision: https://reviews.facebook.net/D13035
Summary:
Added MultiIterate() which does a seek and some Next/Prev
calls. Iterator status is checked only, no data integrity check
Test Plan:
make db_stress
./db_stress --iterpercent=<nonzero value> --readpercent=, etc.
Reviewers: emayanke, dhruba, xjin
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12915
Summary:
Added a new field called max_size_amplification_ratio in the
CompactionOptionsUniversal structure. This determines the maximum
percentage overhead of space amplification.
The size amplification is defined to be the ratio between the size of
the oldest file to the sum of the sizes of all other files. If the
size amplification exceeds the specified value, then min_merge_width
and max_merge_width are ignored and a full compaction of all files is done.
A value of 10 means that the size a database that stores 100 bytes
of user data could occupy 110 bytes of physical storage.
Test Plan: Unit test DBTest.UniversalCompactionSpaceAmplification added.
Reviewers: haobo, emayanke, xjin
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12825
Summary: Replace include/leveldb with include/rocksdb.
Test Plan:
make clean; make check
make clean; make release
Differential Revision: https://reviews.facebook.net/D12489
Summary:
This patch adds three new MemTableRep's: UnsortedRep, PrefixHashRep, and VectorRep.
UnsortedRep stores keys in an std::unordered_map of std::sets. When an iterator is requested, it dumps the keys into an std::set and iterates over that.
VectorRep stores keys in an std::vector. When an iterator is requested, it creates a copy of the vector and sorts it using std::sort. The iterator accesses that new vector.
PrefixHashRep stores keys in an unordered_map mapping prefixes to ordered sets.
I also added one API change. I added a function MemTableRep::MarkImmutable. This function is called when the rep is added to the immutable list. It doesn't do anything yet, but it seems like that could be useful. In particular, for the vectorrep, it means we could elide the extra copy and just sort in place. The only reason I haven't done that yet is because the use of the ArenaAllocator complicates things (I can elaborate on this if needed).
Test Plan:
make -j32 check
./db_stress --memtablerep=vector
./db_stress --memtablerep=unsorted
./db_stress --memtablerep=prefixhash --prefix_size=10
Reviewers: dhruba, haobo, emayanke
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12117
Summary:
Most code change in this diff is code cleanup/rewrite. The logic changes include:
(1) add universal compaction to db_crashtest2.py
(2) randomly set --test_batches_snapshots to be 0 or 1 in db_crashtest2.py. Old codes always use 1.
(3) use different tmp directory as db directory in different runs. I saw some intermittent errors in my local tests. Use of different tmp directory seems to be able to solve the issue.
Test Plan: Have run "make crashtest" for multiple times. Also run "make all check"
Reviewers: emayanke, dhruba, haobo
Reviewed By: emayanke
Differential Revision: https://reviews.facebook.net/D12369
Test Plan:
- make all check;
- make release;
- make stringappend_test; ./stringappend_test
Reviewers: haobo, emayanke
Reviewed By: haobo
CC: leveldb, kailiu
Differential Revision: https://reviews.facebook.net/D12381
Summary: Also expanded class LogFile to have startSequene and FileSize and exposed it publicly
Test Plan: make all check
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12087
Summary:
Updated db_bench and utilities/merge_operators.h to allow for dynamic benchmarking
of merge operators in db_bench. Added a new test (--benchmarks=mergerandom), which performs
a bunch of random Merge() operations over random keys. Also added a "--merge_operator=" flag
so that the tester can easily benchmark different merge operators. Currently supports
the PutOperator and UInt64Add operator. Support for stringappend or list append may come later.
Test Plan:
1. make db_bench
2. Test the PutOperator (simulating Put) as follows:
./db_bench --benchmarks=fillrandom,readrandom,updaterandom,readrandom,mergerandom,readrandom --merge_operator=put
--threads=2
3. Test the UInt64AddOperator (simulating numeric addition) similarly:
./db_bench --value_size=8 --benchmarks=fillrandom,readrandom,updaterandom,readrandom,mergerandom,readrandom
--merge_operator=uint64add --threads=2
Reviewers: haobo, dhruba, zshao, MarkCallaghan
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11535
Summary: I changed the db_stress configs, but forgot to update the scripts using the old configs.
Test Plan: 'make blackbox_crash_test' and 'make whitebox_crash_test' start running normally now (I haven't run them til the end, though).
Reviewers: vamsi
Reviewed By: vamsi
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D12303
Summary:
Minor fix to current codes, including: coding style, output format,
comments. No major logic change. There are only 2 real changes, please see my inline comments.
Test Plan: make all check
Reviewers: haobo, dhruba, emayanke
Differential Revision: https://reviews.facebook.net/D12297
Summary: The ability to dump internal keys associated with certain user keys, directly from sst files, is very useful for diagnosis. Will incorporate it directly into ldb later.
Test Plan: run it
Reviewers: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12075
Summary: rocksdb replicaiton will need this when writing value+TS from master to slave 'as is'
Test Plan: make
Reviewers: dhruba, vamsi, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11919
Summary: Removed KeyMayExistImpl because KeyMayExist demanded Get like semantics now. Removed no_io from memtable and imm because we need the proper value now and shouldn't just stop when we see Merge in memtable. Added checks to block_cache. Updated documentation and unit-test
Test Plan: make all check;db_stress for 1 hour
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11853
Summary: filter_deletes options introduced in db_stress makes it drop Deletes on key if KeyMayExist(key) returns false on the key. code change was simple and tested so not wasting reviewer's time.
Test Plan: maek crash_test; python tools/db_crashtest[1|2].py
CC: dhruba, vamsi
Differential Revision: https://reviews.facebook.net/D11769
Summary:
Introduced KeyMayExist checking during writebatch-delete and removed from Outer Delete API because it uses writebatch-delete.
Added code to skip getting Table from disk if not already present in table_cache.
Some renaming of variables.
Introduced KeyMayExistImpl which allows checking since specified sequence number in GetImpl useful to check partially written writebatch.
Changed KeyMayExist to not be pure virtual and provided a default implementation.
Expanded unit-tests in db_test to check appropriately.
Ran db_stress for 1 hour with ./db_stress --max_key=100000 --ops_per_thread=10000000 --delpercent=50 --filter_deletes=1 --statistics=1.
Test Plan: db_stress;make check
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb, xjin
Differential Revision: https://reviews.facebook.net/D11745
Summary:
Wrote a new function in db_impl.c-CheckKeyMayExist that calls Get but with a new parameter turned on which makes Get return false only if bloom filters can guarantee that key is not in database. Delete calls this function and if the option- deletes_use_filter is turned on and CheckKeyMayExist returns false, the delete will be dropped saving:
1. Put of delete type
2. Space in the db,and
3. Compaction time
Test Plan:
make all check;
will run db_stress and db_bench and enhance unit-test once the basic design gets approved
Reviewers: dhruba, haobo, vamsi
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11607
Summary: db_stress should alos print complete statistics like db_bench. Needed this when I wanted to measure number of delete-IOs dropped due to CheckKeyMayExist to be introduced to rocksdb codebase later- to make deltes in rocksdb faster
Test Plan: make db_stress;./db_stress --max_key=100 --ops_per_thread=1000 --statistics=1
Reviewers: sheki, dhruba, vamsi, haobo
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D11655
Summary:
There is a new option called hybrid_mode which, when switched on,
causes HBase style compactions. Files from L0 are
compacted back into L0. This meat of this compaction algorithm
is in PickCompactionHybrid().
All files reside in L0. That means all files have overlapping
keys. Each file has a time-bound, i.e. each file contains a
range of keys that were inserted around the same time. The
start-seqno and the end-seqno refers to the timeframe when
these keys were inserted. Files that have contiguous seqno
are compacted together into a larger file. All files are
ordered from most recent to the oldest.
The current compaction algorithm starts to look for
candidate files starting from the most recent file. It continues to
add more files to the same compaction run as long as the
sum of the files chosen till now is smaller than the next
candidate file size. This logic needs to be debated
and validated.
The above logic should reduce write amplification to a
large extent... will publish numbers shortly.
Test Plan: dbstress runs for 6 hours with no data corruption (tested so far).
Differential Revision: https://reviews.facebook.net/D11289
Summary:
There is a new option called hybrid_mode which, when switched on,
causes HBase style compactions. Files from L0 are
compacted back into L0. This meat of this compaction algorithm
is in PickCompactionHybrid().
All files reside in L0. That means all files have overlapping
keys. Each file has a time-bound, i.e. each file contains a
range of keys that were inserted around the same time. The
start-seqno and the end-seqno refers to the timeframe when
these keys were inserted. Files that have contiguous seqno
are compacted together into a larger file. All files are
ordered from most recent to the oldest.
The current compaction algorithm starts to look for
candidate files starting from the most recent file. It continues to
add more files to the same compaction run as long as the
sum of the files chosen till now is smaller than the next
candidate file size. This logic needs to be debated
and validated.
The above logic should reduce write amplification to a
large extent... will publish numbers shortly.
Test Plan: dbstress runs for 6 hours with no data corruption (tested so far).
Differential Revision: https://reviews.facebook.net/D11289
Summary: As title, now that db_stress supports --map_read properly
Test Plan: make crash_test
Reviewers: vamsi, emayanke, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11391
Summary: as title, also removed an incorrect assertion
Test Plan: make check; db_stress --mmap_read=1; db_stress --mmap_read=0
Reviewers: dhruba, emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11367
Summary:
Rocksdb allos specifying the number of files in L0 that triggers
compactions. Expose this api as a command line parameter for
running db_stress.
Test Plan: Run test
Reviewers: sheki, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11343
Summary:
This diff simplifies EnvOptions by treating it as POD, similar to Options.
- virtual functions are removed and member fields are accessed directly.
- StorageOptions is removed.
- Options.allow_readahead and Options.allow_readahead_compactions are deprecated.
- Unused global variables are removed: useOsBuffer, useFsReadAhead, useMmapRead, useMmapWrite
Test Plan: make check; db_stress
Reviewers: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11175
Summary: These extra options caught some bugs. Will be run via Jenkins now with the crash_test
Test Plan: ./make crashtest
Reviewers: dhruba, vamsi
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11151
Summary:
I think the check for "error" that I added had caused
false alarm. Fixed that.
Test Plan:
Revert Plan: OK
Task ID: #
Reviewers: emayanke, dhruba
Reviewed By: emayanke
Differential Revision: https://reviews.facebook.net/D11139
Summary: Make Statistics usable by client
Test Plan: make check; db_bench
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D10899
Summary:
This is initial version. A few ways in which this could
be extended in the future are:
(a) Killing from more places in source code
(b) Hashing stack and using that hash in determining whether to crash.
This is to avoid crashing more often at source lines that are executed
more often.
(c) Raising exceptions or returning errors instead of killing
Test Plan:
This whole thing is for testing.
Here is part of output:
python2.7 tools/db_crashtest2.py -d 600
Running db_stress
db_stress retncode -15 output LevelDB version : 1.5
Number of threads : 32
Ops per thread : 10000000
Read percentage : 50
Write-buffer-size : 4194304
Delete percentage : 30
Max key : 1000
Ratio #ops/#keys : 320000
Num times DB reopens: 0
Batches/snapshots : 1
Purge redundant % : 50
Num keys per lock : 4
Compression : snappy
------------------------------------------------
No lock creation because test_batches_snapshots set
2013/04/26-17:55:17 Starting database operations
Created bg thread 0x7fc1f07ff700
... finished 60000 ops
Running db_stress
db_stress retncode -15 output LevelDB version : 1.5
Number of threads : 32
Ops per thread : 10000000
Read percentage : 50
Write-buffer-size : 4194304
Delete percentage : 30
Max key : 1000
Ratio #ops/#keys : 320000
Num times DB reopens: 0
Batches/snapshots : 1
Purge redundant % : 50
Num keys per lock : 4
Compression : snappy
------------------------------------------------
Created bg thread 0x7ff0137ff700
No lock creation because test_batches_snapshots set
2013/04/26-17:56:15 Starting database operations
... finished 90000 ops
Revert Plan: OK
Task ID: #2252691
Reviewers: dhruba, emayanke
Reviewed By: emayanke
CC: leveldb, haobo
Differential Revision: https://reviews.facebook.net/D10581
Summary: db can't reopen safely with disable_wal set!
Test Plan: make db_stress; run db_stress with disable_wal and reopens set and see error
Reviewers: dhruba, vamsi
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10857
Summary: Will help while debugging if the generated value is truncated at proper length.
Test Plan: make db_stress;/db_stress --max_key=10000 --db=/tmp/mcr --threads=1 --ops_per_thread=10000
Reviewers: dhruba, vamsi
Reviewed By: vamsi
Differential Revision: https://reviews.facebook.net/D10845
Summary: ldb works with raw data from the database and needs to be aware of ttl-database to work with it meaningfully. '-ttl' option now tells it that. Also added onto the ldb_test.py test. This option may be specified alongwith put, get, scan or dump. There is no support to provide a ttl-value and it uses default forever because there is no use-case for this currently.
Test Plan: make ldb_test; python tools/ldb_test.py
Reviewers: dhruba, sheki, haobo, vamsi
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10797
Summary:
When opened with DBTimestamp::Open call, timestamps are prepended to and stripped from the value during subsequent Put and Get calls respectively. The Timestamp is used to discard values in Get and custom compaction filter which have exceeded their TTL which is specified during Open.
Have made a temporary change to Makefile to let us test with the temporary file TestTime.cc. Have also changed the private members of db_impl.h to protected to let them be inherited by the new class DBTimestamp
Test Plan: make db_timestamp; TestTime.cc(will not check it in) shows how to use the apis currently, but I will write unit-tests shortly
Reviewers: dhruba, vamsi, haobo, sheki, heyongqiang, vkrest
Reviewed By: vamsi
CC: zshao, xjin, vkrest, MarkCallaghan
Differential Revision: https://reviews.facebook.net/D10311
Summary:
- don't see a point exposing table.h to the public.
- fixed make clean to remove also *.d files.
Test Plan: make check; db_stress
Reviewers: dhruba, heyongqiang
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10479
Summary: Primarily a refactor. Introduced LDBTool interface to which customers can plug in their options and this will create their own version of ldb tool.
Test Plan: made ldb tool and tried it.
Reviewers: dhruba, heyongqiang
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10191
Summary: To know which options the crashtest was run with. Also changed print to sys.stdout.write which is more standard.
Test Plan: python tools/db_crashtest.py
Reviewers: vamsi, akushner, dhruba
Reviewed By: akushner
Differential Revision: https://reviews.facebook.net/D10119
Summary: make crash_test will now invoke the crash_test. Also some cleanup in the db_crashtest.py file
Test Plan: make crash_test
Reviewers: akushner, vamsi, sheki, dhruba
Reviewed By: vamsi
Differential Revision: https://reviews.facebook.net/D9987
Summary: The crash_test depends on db_stress to work with pre-existing dir
Test Plan: make db_stress; Run db_stress with 'destroy_db_initially=0'
Reviewers: vamsi, dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10041
Summary: For sanity w.r.t. the way we split up the reopens equally among the ops/thread
Test Plan: make db_stress; db_stress --ops_per_thread=10 --reopens=10 => error
Reviewers: vamsi, dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10023
Summary:
When I run db_crashtest, I am seeing lot of warnings that say db_stress completed
before it was killed. To fix that I made ops per thread a very large value so that it keeps
running until it is killed.
I also set #reopens to 0. Since we are killing the process anyway, the 'simulated crash'
that happens during reopen may not add additional value.
I usually see 10-25K ops happening before the kill. So I increased max_key from 100 to
1000 so that we use more distinct keys.
Test Plan:
Ran a few times.
Revert Plan: OK
Task ID: #
Reviewers: emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9909
Summary: The script runs and kills the stress test periodically. Default values have been used in the script now. Should I make this a part of the Makefile or automated rocksdb build? The values can be easily changed in the script right now, but should I add some support for variable values or input to the script? I believe the script achieves its objective of unsafe crashes and reopening to expect sanity in the database.
Test Plan: python tools/db_crashtest.py
Reviewers: dhruba, vamsi, MarkCallaghan
Reviewed By: vamsi
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9369
Summary:
Earlier Statistics object was a raw pointer. This meant the user had to clear up
the Statistics object after creating the database. In most use cases the database is created in a function and the statistics pointer is out of scope. Hence the statistics object would never be deleted.
Now Using a shared_ptr to manage this.
Want this in before the next release.
Test Plan: make all check.
Reviewers: dhruba, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9735
Summary: simple sed command to replace NULL in tools directory. Was missed by the previous codemod.
Test Plan: it compiles
Reviewers: emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9621
Summary:
This patch allows an application to specify whether to use bufferedio,
reads-via-mmaps and writes-via-mmaps per database. Earlier, there
was a global static variable that was used to configure this functionality.
The default setting remains the same (and is backward compatible):
1. use bufferedio
2. do not use mmaps for reads
3. use mmap for writes
4. use readaheads for reads needed for compaction
I also added a parameter to db_bench to be able to explicitly specify
whether to do readaheads for compactions or not.
Test Plan: make check
Reviewers: sheki, heyongqiang, MarkCallaghan
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9429
Mayank Agarwal