Summary:
Added rate limiter and read rate-limiting support to SequentialFileReader. I've updated call sites to SequentialFileReader::Read with appropriate IO priority (or left a TODO and specified IO_TOTAL for now).
The PR is separated into four commits: the first one added the rate-limiting support, but with some fixes in the unit test since the number of request bytes from rate limiter in SequentialFileReader are not accurate (there is overcharge at EOF). The second commit fixed this by allowing SequentialFileReader to check file size and determine how many bytes are left in the file to read. The third commit added benchmark related code. The fourth commit moved the logic of using file size to avoid overcharging the rate limiter into backup engine (the main user of SequentialFileReader).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9973
Test Plan:
- `make check`, backup_engine_test covers usage of SequentialFileReader with rate limiter.
- Run db_bench to check if rate limiting is throttling as expected: Verified that reads and writes are together throttled at 2MB/s, and at 0.2MB chunks that are 100ms apart.
- Set up: `./db_bench --benchmarks=fillrandom -db=/dev/shm/test_rocksdb`
- Benchmark:
```
strace -ttfe read,write ./db_bench --benchmarks=backup -db=/dev/shm/test_rocksdb --backup_rate_limit=2097152 --use_existing_db
strace -ttfe read,write ./db_bench --benchmarks=restore -db=/dev/shm/test_rocksdb --restore_rate_limit=2097152 --use_existing_db
```
- db bench on backup and restore to ensure no performance regression.
- backup (avg over 50 runs): pre-change: 1.90443e+06 micros/op; post-change: 1.8993e+06 micros/op (improve by 0.2%)
- restore (avg over 50 runs): pre-change: 1.79105e+06 micros/op; post-change: 1.78192e+06 micros/op (improve by 0.5%)
```
# Set up
./db_bench --benchmarks=fillrandom -db=/tmp/test_rocksdb -num=10000000
# benchmark
TEST_TMPDIR=/tmp/test_rocksdb
NUM_RUN=50
for ((j=0;j<$NUM_RUN;j++))
do
./db_bench -db=$TEST_TMPDIR -num=10000000 -benchmarks=backup -use_existing_db | egrep 'backup'
# Restore
#./db_bench -db=$TEST_TMPDIR -num=10000000 -benchmarks=restore -use_existing_db
done > rate_limit.txt && awk -v NUM_RUN=$NUM_RUN '{sum+=$3;sum_sqrt+=$3^2}END{print sum/NUM_RUN, sqrt(sum_sqrt/NUM_RUN-(sum/NUM_RUN)^2)}' rate_limit.txt >> rate_limit_2.txt
```
Reviewed By: hx235
Differential Revision: D36327418
Pulled By: cbi42
fbshipit-source-id: e75d4307cff815945482df5ba630c1e88d064691
Summary:
**Context:**
`BackupEngineRateLimitingTestWithParam.RateLimiting` and `BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup` involve creating backup and restoring of a big database with rate-limiting. Using the normal env with a normal clock requires real elapse of time (13702 - 19848 ms/per test). As suggested in https://github.com/facebook/rocksdb/pull/8722#discussion_r703698603, this PR is to speed it up with SpecialEnv (`time_elapse_only_sleep=true`) where its clock accepts fake elapse of time during rate-limiting (100 - 600 ms/per test)
**Summary:**
- Added TEST_ function to set clock of the default rate limiters in backup engine
- Shrunk testdb by 10 times while keeping it big enough for testing
- Renamed some test variables and reorganized some if-else branch for clarity without changing the test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9974
Test Plan:
- Run tests pre/post PR the same time to verify the tests are sped up by 90 - 95%
`BackupEngineRateLimitingTestWithParam.RateLimiting`
Pre:
```
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/0
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/0 (11123 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/1
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/1 (9441 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/2
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/2 (11096 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/3
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/3 (9339 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/4
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/4 (11121 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/5
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/5 (9413 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/6
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/6 (11185 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/7
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/7 (9511 ms)
[----------] 8 tests from RateLimiting/BackupEngineRateLimitingTestWithParam (82230 ms total)
```
Post:
```
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/0
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/0 (395 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/1
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/1 (564 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/2
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/2 (358 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/3
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/3 (567 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/4
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/4 (173 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/5
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/5 (176 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/6
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/6 (191 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/7
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/7 (177 ms)
[----------] 8 tests from RateLimiting/BackupEngineRateLimitingTestWithParam (2601 ms total)
```
`BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup`
Pre:
```
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/0
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/0 (7275 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/1
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/1 (3961 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/2
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/2 (7117 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/3
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/3 (3921 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/4
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/4 (19862 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/5
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/5 (10231 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/6
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/6 (19848 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/7
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/7 (10372 ms)
[----------] 8 tests from RateLimiting/BackupEngineRateLimitingTestWithParam (82587 ms total)
```
Post:
```
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/0
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/0 (157 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/1
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/1 (152 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/2
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/2 (160 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/3
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/3 (158 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/4
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/4 (155 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/5
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/5 (151 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/6
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/6 (146 ms)
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/7
[ OK ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimitingVerifyBackup/7 (153 ms)
[----------] 8 tests from RateLimiting/BackupEngineRateLimitingTestWithParam (1232 ms total)
```
Reviewed By: pdillinger
Differential Revision: D36336345
Pulled By: hx235
fbshipit-source-id: 724c6ba745f95f56d4440a6d2f1e4512a2987589
Summary:
ToString() is created as some platform doesn't support std::to_string(). However, we've already used std::to_string() by mistake for 16 months (in db/db_info_dumper.cc). This commit just remove ToString().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9955
Test Plan: Watch CI tests
Reviewed By: riversand963
Differential Revision: D36176799
fbshipit-source-id: bdb6dcd0e3a3ab96a1ac810f5d0188f684064471
Summary:
Right now we still don't fully use std::numeric_limits but use a macro, mainly for supporting VS 2013. Right now we only support VS 2017 and up so it is not a problem. The code comment claims that MinGW still needs it. We don't have a CI running MinGW so it's hard to validate. since we now require C++17, it's hard to imagine MinGW would still build RocksDB but doesn't support std::numeric_limits<>.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9954
Test Plan: See CI Runs.
Reviewed By: riversand963
Differential Revision: D36173954
fbshipit-source-id: a35a73af17cdcae20e258cdef57fcf29a50b49e0
Summary:
Various renaming and fixes to get rid of remaining uses of
"backupable" which is terminology leftover from the original, flawed
design of BackupableDB. Now any DB can be backed up, using BackupEngine.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9792
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D35334386
Pulled By: pdillinger
fbshipit-source-id: 2108a42b4575c8cccdfd791c549aae93ec2f3329
Summary:
The primary goal of this change is to add support for backing up and
restoring (applying on restore) file temperature metadata, without
committing to either the DB manifest or the FS reported "current"
temperatures being exclusive "source of truth".
To achieve this goal, we need to add temperature information to backup
metadata, which requires updated backup meta schema. Fortunately I
prepared for this in https://github.com/facebook/rocksdb/issues/8069, which began forward compatibility in version
6.19.0 for this kind of schema update. (Previously, backup meta schema
was not extensible! Making this schema update public will allow some
other "nice to have" features like taking backups with hard links, and
avoiding crc32c checksum computation when another checksum is already
available.) While schema version 2 is newly public, the default schema
version is still 1. Until we change the default, users will need to set
to 2 to enable features like temperature data backup+restore. New
metadata like temperature information will be ignored with a warning
in versions before this change and since 6.19.0. The metadata is
considered ignorable because a functioning DB can be restored without
it.
Some detail:
* Some renaming because "future schema" is now just public schema 2.
* Initialize some atomics in TestFs (linter reported)
* Add temperature hint support to SstFileDumper (used by BackupEngine)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9660
Test Plan:
related unit test majorly updated for the new functionality,
including some shared testing support for tracking temperatures in a FS.
Some other tests and testing hooks into production code also updated for
making the backup meta schema change public.
Reviewed By: ajkr
Differential Revision: D34686968
Pulled By: pdillinger
fbshipit-source-id: 3ac1fa3e67ee97ca8a5103d79cc87d872c1d862a
Summary:
Add Temperature hints information from RocksDB in API
`NewSequentialFile()`. backup and checkpoint operations need to open the
source files with `NewSequentialFile()`, which will have the temperature
hints. Other operations are not covered.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9499
Test Plan: Added unittest
Reviewed By: pdillinger
Differential Revision: D34006115
Pulled By: jay-zhuang
fbshipit-source-id: 568b34602b76520e53128672bd07e9d886786a2f
Summary:
This change standardizes on a new 16-byte cache key format for
block cache (incl compressed and secondary) and persistent cache (but
not table cache and row cache).
The goal is a really fast cache key with practically ideal stability and
uniqueness properties without external dependencies (e.g. from FileSystem).
A fixed key size of 16 bytes should enable future optimizations to the
concurrent hash table for block cache, which is a heavy CPU user /
bottleneck, but there appears to be measurable performance improvement
even with no changes to LRUCache.
This change replaces a lot of disjointed and ugly code handling cache
keys with calls to a simple, clean new internal API (cache_key.h).
(Preserving the old cache key logic under an option would be very ugly
and likely negate the performance gain of the new approach. Complete
replacement carries some inherent risk, but I think that's acceptable
with sufficient analysis and testing.)
The scheme for encoding new cache keys is complicated but explained
in cache_key.cc.
Also: EndianSwapValue is moved to math.h to be next to other bit
operations. (Explains some new include "math.h".) ReverseBits operation
added and unit tests added to hash_test for both.
Fixes https://github.com/facebook/rocksdb/issues/7405 (presuming a root cause)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9126
Test Plan:
### Basic correctness
Several tests needed updates to work with the new functionality, mostly
because we are no longer relying on filesystem for stable cache keys
so table builders & readers need more context info to agree on cache
keys. This functionality is so core, a huge number of existing tests
exercise the cache key functionality.
### Performance
Create db with
`TEST_TMPDIR=/dev/shm ./db_bench -bloom_bits=10 -benchmarks=fillrandom -num=3000000 -partition_index_and_filters`
And test performance with
`TEST_TMPDIR=/dev/shm ./db_bench -readonly -use_existing_db -bloom_bits=10 -benchmarks=readrandom -num=3000000 -duration=30 -cache_index_and_filter_blocks -cache_size=250000 -threads=4`
using DEBUG_LEVEL=0 and simultaneous before & after runs.
Before ops/sec, avg over 100 runs: 121924
After ops/sec, avg over 100 runs: 125385 (+2.8%)
### Collision probability
I have built a tool, ./cache_bench -stress_cache_key to broadly simulate host-wide cache activity
over many months, by making some pessimistic simplifying assumptions:
* Every generated file has a cache entry for every byte offset in the file (contiguous range of cache keys)
* All of every file is cached for its entire lifetime
We use a simple table with skewed address assignment and replacement on address collision
to simulate files coming & going, with quite a variance (super-Poisson) in ages. Some output
with `./cache_bench -stress_cache_key -sck_keep_bits=40`:
```
Total cache or DBs size: 32TiB Writing 925.926 MiB/s or 76.2939TiB/day
Multiply by 9.22337e+18 to correct for simulation losses (but still assume whole file cached)
```
These come from default settings of 2.5M files per day of 32 MB each, and
`-sck_keep_bits=40` means that to represent a single file, we are only keeping 40 bits of
the 128-bit cache key. With file size of 2\*\*25 contiguous keys (pessimistic), our simulation
is about 2\*\*(128-40-25) or about 9 billion billion times more prone to collision than reality.
More default assumptions, relatively pessimistic:
* 100 DBs in same process (doesn't matter much)
* Re-open DB in same process (new session ID related to old session ID) on average
every 100 files generated
* Restart process (all new session IDs unrelated to old) 24 times per day
After enough data, we get a result at the end:
```
(keep 40 bits) 17 collisions after 2 x 90 days, est 10.5882 days between (9.76592e+19 corrected)
```
If we believe the (pessimistic) simulation and the mathematical generalization, we would need to run a billion machines all for 97 billion days to expect a cache key collision. To help verify that our generalization ("corrected") is robust, we can make our simulation more precise with `-sck_keep_bits=41` and `42`, which takes more running time to get enough data:
```
(keep 41 bits) 16 collisions after 4 x 90 days, est 22.5 days between (1.03763e+20 corrected)
(keep 42 bits) 19 collisions after 10 x 90 days, est 47.3684 days between (1.09224e+20 corrected)
```
The generalized prediction still holds. With the `-sck_randomize` option, we can see that we are beating "random" cache keys (except offsets still non-randomized) by a modest amount (roughly 20x less collision prone than random), which should make us reasonably comfortable even in "degenerate" cases:
```
197 collisions after 1 x 90 days, est 0.456853 days between (4.21372e+18 corrected)
```
I've run other tests to validate other conditions behave as expected, never behaving "worse than random" unless we start chopping off structured data.
Reviewed By: zhichao-cao
Differential Revision: D33171746
Pulled By: pdillinger
fbshipit-source-id: f16a57e369ed37be5e7e33525ace848d0537c88f
Summary:
**Context:**
Some existing internal calls of `GenericRateLimiter::Request()` in backupable_db.cc and newly added internal calls in https://github.com/facebook/rocksdb/pull/8722/ do not make sure `bytes <= GetSingleBurstBytes()` as required by rate_limiter https://github.com/facebook/rocksdb/blob/master/include/rocksdb/rate_limiter.h#L47.
**Impacts of this bug include:**
(1) In debug build, when `GenericRateLimiter::Request()` requests bytes greater than `GenericRateLimiter:: kMinRefillBytesPerPeriod = 100` byte, process will crash due to assertion failure. See https://github.com/facebook/rocksdb/pull/9063#discussion_r737034133 and for possible scenario
(2) In production build, although there will not be the above crash due to disabled assertion, the bug can lead to a request of small bytes being blocked for a long time by a request of same priority with insanely large bytes from a different thread. See updated https://github.com/facebook/rocksdb/wiki/Rate-Limiter ("Notice that although....the maximum bytes that can be granted in a single request have to be bounded...") for more info.
There is an on-going effort to move rate-limiting to file wrapper level so rate limiting in `BackupEngine` and this PR might be made obsolete in the future.
**Summary:**
- Implemented loop-calling `GenericRateLimiter::Request()` with `bytes <= GetSingleBurstBytes()` as a static private helper function `BackupEngineImpl::LoopRateLimitRequestHelper`
-- Considering make this a util function in `RateLimiter` later or do something with `RateLimiter::RequestToken()`
- Replaced buggy internal callers with this helper function wherever requested byte is not pre-limited by `GetSingleBurstBytes()`
- Removed the minimum refill bytes per period enforced by `GenericRateLimiter` since it is useless and prevents testing `GenericRateLimiter` for extreme case with small refill bytes per period.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9063
Test Plan:
- Added a new test that failed the assertion before this change and now passes
- It exposed bugs in [the write during creation in `CopyOrCreateFile()`](df7cc66e17/utilities/backupable/backupable_db.cc (L2034-L2043)), [the read of table properties in `GetFileDbIdentities()`](df7cc66e17/utilities/backupable/backupable_db.cc (L2372-L2378)), [some read of metadata in `BackupMeta::LoadFromFile()`](df7cc66e17/utilities/backupable/backupable_db.cc (L2726))
- Passing Existing tests
Reviewed By: ajkr
Differential Revision: D31824535
Pulled By: hx235
fbshipit-source-id: d2b3dea7a64e2a4b1e6a59fca322f0800a4fcbcc
Summary:
Directory fsync might be expensive on btrfs and it may not be needed.
Here are 4 directory fsync cases:
1. creating a new file: dir-fsync is not needed on btrfs, as long as the
new file itself is synced.
2. renaming a file: dir-fsync is not needed if the renamed file is
synced. So an API `FsyncAfterFileRename(filename, ...)` is provided
to sync the file on btrfs. By default, it just calls dir-fsync.
3. deleting files: dir-fsync is forced by set
`IOOptions.force_dir_fsync = true`
4. renaming multiple files (like backup and checkpoint): dir-fsync is
forced, the same as above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8903
Test Plan: run tests on btrfs and non btrfs
Reviewed By: ajkr
Differential Revision: D30885059
Pulled By: jay-zhuang
fbshipit-source-id: dd2730b31580b0bcaedffc318a762d7dbf25de4a
Summary:
New classes FileStorageInfo and LiveFileStorageInfo and
'experimental' function DB::GetLiveFilesStorageInfo, which is intended
to largely replace several fragmented DB functions needed to create
checkpoints and backups.
This function is now used to create checkpoints and backups, because
it fixes many (probably not all) of the prior complexities of checkpoint
not having atomic access to DB metadata. This also ensures strong
functional test coverage of the new API. Specifically, much of the old
CheckpointImpl::CreateCustomCheckpoint has been migrated to and
updated in DBImpl::GetLiveFilesStorageInfo, with the former now
calling the latter.
Also, the class FileStorageInfo in metadata.h compatibly replaces
BackupFileInfo and serves as a new base class for SstFileMetaData.
Some old fields of SstFileMetaData are still provided (for now) but
deprecated.
Although FileStorageInfo::directory is accurate when using db_paths
and/or cf_paths, these have never been supported by Checkpoint
nor BackupEngine and still are not. This change does now detect
these cases and return NotSupported when appropriate. (More work
needed for support.)
Somehow this change broke ProgressCallbackDuringBackup, but
the progress_callback logic was dubious to begin with because it
would call the callback based on copy buffer size, not size actually
copied. Logic and test updated to track size actually copied
per-thread.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8968
Test Plan:
tests updated.
DB::GetLiveFilesStorageInfo mostly tested by use in CheckpointImpl.
DBTest.SnapshotFiles updated to also test GetLiveFilesStorageInfo,
including reading the data after DB close.
Added CheckpointTest.CheckpointWithDbPath (NotSupported).
Reviewed By: siying
Differential Revision: D31242045
Pulled By: pdillinger
fbshipit-source-id: b183d1ce9799e220daaefd6b3b5365d98de676c0
Summary:
Updates a few remaining functions that should have been updated
from Status -> IOStatus, and adds to HISTORY for the overall change
including https://github.com/facebook/rocksdb/issues/8820.
This change is for inclusion in version 6.25.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8940
Test Plan: CI
Reviewed By: zhichao-cao
Differential Revision: D31085029
Pulled By: pdillinger
fbshipit-source-id: 91557c6a39ef1d90357d4f4dcd79af0645d87c7b
Summary:
In order to populate the IOStatus up to the higher level, replace some of the Status to IOStatus.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8820
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D30967215
Pulled By: zhichao-cao
fbshipit-source-id: ccf9d5cfbd9d3de047c464aaa85f9fa43b474903
Summary:
Context:
While all the non-trivial write operations in BackupEngine go through the RateLimiter, reads currently do not. In general, this is not a huge issue because (especially since some I/O efficiency fixes) reads in BackupEngine are mostly limited by corresponding writes, for both backup and restore. But in principle we should charge the RateLimiter for reads as well.
- Charged read operations in `BackupEngineImpl::CopyOrCreateFile`, `BackupEngineImpl::ReadFileAndComputeChecksum`, `BackupEngineImpl::BackupMeta::LoadFromFile` and `BackupEngineImpl::GetFileDbIdentities`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8722
Test Plan:
- Passed existing tests
- Passed added unit tests
Reviewed By: pdillinger
Differential Revision: D30610464
Pulled By: hx235
fbshipit-source-id: 9b08c9387159a5385c8d390d6666377a0d0117e5
Summary:
Gets `Statistics` from the options associated with the `DB` undergoing backup, and populates new ticker stats with the thread-local `IOContext` read/write counters for the threads doing backup work.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8819
Reviewed By: pdillinger
Differential Revision: D30779238
Pulled By: ajkr
fbshipit-source-id: 75ccafc355f90906df5cf80367f7245b985772d8
Summary:
If RateLimiter burst bytes changes during concurrent Restore
operations
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8732
Test Plan: updated unit test fails with TSAN before change, passes after
Reviewed By: ajkr
Differential Revision: D30683879
Pulled By: pdillinger
fbshipit-source-id: d0ddb3587ade91ee2a4d926b475acf7781b03086
Summary:
Guarantees that if a restore is interrupted, DB::Open will fail. This works by
restoring CURRENT first to CURRENT.tmp then as a final step renaming to CURRENT.
Also makes restore respect BackupEngineOptions::sync (default true). When set,
the restore is guaranteed persisted by the time it returns OK. Also makes the above
atomicity guarantee work in case the interruption is power loss or OS crash (not just
process interruption or crash).
Fixes https://github.com/facebook/rocksdb/issues/8500
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8568
Test Plan:
added to backup mini-stress unit test. Passes with
gtest_repeat=100 (whereas fails 7 times without the CURRENT.tmp)
Reviewed By: akankshamahajan15
Differential Revision: D29812605
Pulled By: pdillinger
fbshipit-source-id: 24e9a993b305b1835ca95558fa7a7152e54cda8e
Summary:
An early design of BackupEngine used stackable DB, so I guess a
DB had to opt-in to being backupable. Unfortunately the naming of that
obsolete design still infects our public API and implementation.
This change fixes the public API, with a deprecated
backward-compatibility header. `BackupableDBOptions` is renamed to
`BackupEngineOptions` (copy-replace in the public header) and
backup_engine.h replaces backupable_db.h (present for backward
compatibility). The only other change in backupable_db.h ->
backup_engine.h is cleaning up headers.
Later changes will fix the internal implementation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8274
Test Plan:
The internal implementation of BackupEngine uses the name
BackupEngineOptions, while the unit tests use the old name
BackupableDBOptions. This gives me confidence that both still work.
Reviewed By: mrambacher
Differential Revision: D28259471
Pulled By: pdillinger
fbshipit-source-id: a25dbe327b9772143488e7bb0ec7139ee42d0613
Summary:
* CreateNewBackup(WithMetadata) returning the BackupID of new backup
through optional new output param. This is especially useful with the
new mutithreading support, so that you can transactionally determine the
ID of a backup you create.
* GetBackupInfo / GetLatestBackupInfo for individual backups, so that
you don't have to comb through a vector of backups if you don't want to.
Updated HISTORY.md (including re: BlobDB support as new feature)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8170
Test Plan:
Added test logic to existing tests, to minimize increase in
cost of running tests
Reviewed By: zhichao-cao
Differential Revision: D27680410
Pulled By: pdillinger
fbshipit-source-id: 1fc45b73d81aae293ccd4a43d9583d7fd915d3eb
Summary:
Add support for blob files for backup/restore like table files.
Since DB session ID is currently not supported for blob files (there is no place to store it in
the header), so for blob files uses the
kLegacyCrc32cAndFileSize naming scheme even if
share_files_with_checksum_naming is set to kUseDbSessionId.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8129
Test Plan: Add new test units
Reviewed By: ltamasi
Differential Revision: D27408510
Pulled By: akankshamahajan15
fbshipit-source-id: b27434d189a639ef3e6ad165c61a143a2daaf06e
Summary:
A current limitation of backups is that you don't know the
exact database state of when the backup was taken. With this new
feature, you can at least inspect the backup's DB state without
restoring it by opening it as a read-only DB.
Rather than add something like OpenAsReadOnlyDB to the BackupEngine API,
which would inhibit opening stackable DB implementations read-only
(if/when their APIs support it), we instead provide a DB name and Env
that can be used to open as a read-only DB.
Possible follow-up work:
* Add a version of GetBackupInfo for a single backup.
* Let CreateNewBackup return the BackupID of the newly-created backup.
Implementation details:
Refactored ChrootFileSystem to split off new base class RemapFileSystem,
which allows more general remapping of files. We use this base class to
implement BackupEngineImpl::RemapSharedFileSystem.
To minimize API impact, I decided to just add these fields `name_for_open`
and `env_for_open` to those set by GetBackupInfo when
include_file_details=true. Creating the RemapSharedFileSystem adds a bit
to the memory consumption, perhaps unnecessarily in some cases, but this
has been mitigated by (a) only initialize the RemapSharedFileSystem
lazily when GetBackupInfo with include_file_details=true is called, and
(b) using the existing `shared_ptr<FileInfo>` objects to hold most of the
mapping data.
To enhance API safety, RemapSharedFileSystem is wrapped by new
ReadOnlyFileSystem which rejects any attempts to write. This uncovered a
couple of places in which DB::OpenForReadOnly would write to the
filesystem, so I fixed these. Added a release note because this affects
logging.
Additional minor refactoring in backupable_db.cc to support the new
functionality.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8142
Test Plan:
new test (run with ASAN and UBSAN), added to stress test and
ran it for a while with amplified backup_one_in
Reviewed By: ajkr
Differential Revision: D27535408
Pulled By: pdillinger
fbshipit-source-id: 04666d310aa0261ef6b2385c43ca793ce1dfd148
Summary:
BackupEngine previously had unclear but strict concurrency
requirements that the API user must follow for safe use. Now we make
that clear, by separating operations into "Read," "Append," and "Write"
operations, and specifying which combinations are safe across threads on
the same BackupEngine object (previously none; now all, using a
read-write lock), and which are safe across different BackupEngine
instances open on the same backup_dir.
The changes to backupable_db.h should be backward compatible. It is
mostly about eliminating copies of what should be the same function and
(unsurprisingly) useful documentation comments were often placed on
only one of the two copies. With the re-organization, we are also
grouping different categories of operations. In the future we might add
BackupEngineReadAppendOnly, but that didn't seem necessary.
To mark API Read operations 'const', I had to mark some implementation
functions 'const' and some fields mutable.
Functional changes:
* Added RWMutex locking around public API functions to implement thread
safety on a single object. To avoid future bugs, this is another
internal class layered on top (removing many "override" in
BackupEngineImpl). It would be possible to allow more concurrency
between operations, rather than mutual exclusion, but IMHO not worth the
work.
* Fixed a race between Open() (Initialize()) and CreateNewBackup() for
different objects on the same backup_dir, where Initialize() could
delete the temporary meta file created during CreateNewBackup().
(This was found by the new test.)
Also cleaned up a couple of "status checked" TODOs, and improved a
checksum mismatch error message to include involved files.
Potential follow-up work:
* CreateNewBackup has an API wart because it doesn't tell you the
BackupID it just created, which makes it of limited use in a multithreaded
setting.
* We could also consider a Refresh() function to catch up to
changes made from another BackupEngine object to the same dir.
* Use a lock file to prevent multiple writer BackupEngines, but this
won't work on remote filesystems not supporting lock files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8115
Test Plan:
new mini-stress test in backup unit tests, run with gcc,
clang, ASC, TSAN, and UBSAN, 100 iterations each.
Reviewed By: ajkr
Differential Revision: D27347589
Pulled By: pdillinger
fbshipit-source-id: 28d82ed2ac672e44085a739ddb19d297dad14b15
Summary:
This does not add any new public APIs or published
functionality, but adds the ability to read and use (and in tests,
write) backups with a new meta file schema, based on the old schema
but not forward-compatible (before this change). The new schema enables
some capabilities not in the old:
* Explicit versioning, so that users get clean error messages the next
time we want to break forward compatibility.
* Ignoring unrecognized fields (with warning), so that new non-critical
features can be added without breaking forward compatibility.
* Rejecting future "non-ignorable" fields, so that new features critical
to some use-cases could potentially be added outside of linear schema
versions, with broken forward compatibility.
* Fields at the end of the meta file, such as for checksum of the meta
file's contents (up to that point)
* New optional 'size' field for each file, which is checked when present
* Optionally omitting 'crc32' field, so that we aren't required to have
a crc32c checksum for files to take a backup. (E.g. to support backup
via hard links and to better support file custom checksums.)
Because we do not have a JSON parser and to share code, the new schema
is simply derived from the old schema.
BackupEngine code is updated to allow missing checksums in some places,
and to make that easier, `has_checksum` and `verify_checksum_after_work`
are eliminated. Empty `checksum_hex` indicates checksum is unknown. I'm
not too afraid of regressing on data integrity, because
(a) we have pretty good test coverage of corruption detection in backups, and
(b) we are increasingly relying on the DB itself for data integrity rather than
it being an exclusive feature of backups.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8069
Test Plan:
new unit tests, added to crash test (some local run with
boosted backup probability)
Reviewed By: ajkr
Differential Revision: D27139824
Pulled By: pdillinger
fbshipit-source-id: 9e0e4decfb42bb84783d64d2d246456d97e8e8c5
Summary:
This API can be used for things like determining how much space
can be freed up by deleting a particular backup, etc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8042
Test Plan:
validation of the API added to many existing backup unit
tests
Reviewed By: mrambacher
Differential Revision: D26936577
Pulled By: pdillinger
fbshipit-source-id: f0bbd90f0917b9781a6837652fb4616d9247816a
Summary:
Removed confusing, awkward, and undocumented internal API
ReadOneLine and replaced with very simple LineFileReader.
In refactoring backupable_db.cc, this has the side benefit of
removing the arbitrary cap on the size of backup metadata files.
Also added Status::MustCheck to make it easy to mark a Status as
"must check." Using this, I can ensure that after
LineFileReader::ReadLine returns false the caller checks GetStatus().
Also removed some excessive conditional compilation in status.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8026
Test Plan: added unit test, and running tests with ASSERT_STATUS_CHECKED
Reviewed By: mrambacher
Differential Revision: D26831687
Pulled By: pdillinger
fbshipit-source-id: ef749c265a7a26bb13cd44f6f0f97db2955f6f0f
Summary:
New comment for share_files_with_checksum:
// Only used if share_table_files is set to true. Setting to false is
// DEPRECATED and potentially dangerous because in that case BackupEngine
// can lose data if backing up databases with distinct or divergent
// history, for example if restoring from a backup other than the latest,
// writing to the DB, and creating another backup. Setting to true (default)
// prevents these issues by ensuring that different table files (SSTs) with
// the same number are treated as distinct. See
// share_files_with_checksum_naming and ShareFilesNaming.
I have also removed interim option kFlagMatchInterimNaming, which is no
longer needed and was never needed for correct+compatible operation
(just performance).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8020
Test Plan:
tests updated. Backward+forward compatibility verified with
SHORT_TEST=1 check_format_compatible.sh. ldb uses default backup
options, and I manually verified shared_checksum in
/tmp/rocksdb_format_compatible_peterd/bak/current/ after run.
Reviewed By: ajkr
Differential Revision: D26786331
Pulled By: pdillinger
fbshipit-source-id: 36f968dfef1f5cacbd65154abe1d846151a55130
Summary:
Removed the uses of the Legacy FileWrapper classes from the source code. The wrappers were creating an additional layer of indirection/wrapping, as the Env already has a FileSystem.
Moved the Custom FileWrapper classes into the CustomEnv, as these classes are really for the private use the the CustomEnv class.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7851
Reviewed By: anand1976
Differential Revision: D26114816
Pulled By: mrambacher
fbshipit-source-id: db32840e58d969d3a0fa6c25aaf13d6dcdc74150
Summary:
The main improvement here is to not include `.` or `..` in the results of `Env::GetChildren`. The occurrence of `.` or `..`; it is non-portable, dependent on the Operating System and the File System. See: https://www.gnu.org/software/libc/manual/html_node/Reading_002fClosing-Directory.html
There were lots of duplicate checks spread through the RocksDB codebase previously to skip `.` and `..`. This new removes the need for those at the source.
Also some minor fixes to `Env::GetChildren`:
* Improve error handling in POSIX implementation
* Remove unnecessary array allocation on Windows
* Fix struct name for Windows Non-UTF-8 API
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7819
Reviewed By: ajkr
Differential Revision: D25837394
Pulled By: jay-zhuang
fbshipit-source-id: 1e137e7218d38b450af9c083f73d5357abcbba2e
Summary:
Handle misuse of snprintf return value to avoid Out of bound
read/write.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7686
Test Plan: make check -j64
Reviewed By: riversand963
Differential Revision: D25030831
Pulled By: akankshamahajan15
fbshipit-source-id: 1a1d181c067c78b94d720323ae00b79566b57cfa
Summary:
As suggested by pdillinger ,The name of kLogFile is misleading, in some tests, kLogFile is defined as info log. Replace it with kWalFile and move it to public, which will be used in https://github.com/facebook/rocksdb/issues/7523
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7580
Test Plan: make check
Reviewed By: riversand963
Differential Revision: D24485420
Pulled By: zhichao-cao
fbshipit-source-id: 955e3dacc1021bb590fde93b0a568ffe9ad80799
Summary:
Two relatively simple functional changes to incremental backup
behavior, integrated with a minor refactoring to reduce code redundancy and
improve error/log message. There are nuances to the impact of these changes,
but I believe they are fundamentally good and generally safe. Those functional
changes:
* Incremental backups no longer read DB table files that are already saved to a
shared part of the backup directory, unless `share_files_with_checksum` is used
with `kLegacyCrc32cAndFileSize` naming (discouraged) where crc32c full file
checksums are needed to determine file naming.
* Justification: incremental backups should not need to read the whole DB,
especially without rate limiting. (Although other BackupEngine reads are not
rate limited either, other non-trivial reads are generally limited by a
corresponding write, as in copying files.) Also, the fact that this is not
already fixed was arguably a bug/oversight in the implementation of https://github.com/facebook/rocksdb/issues/7110.
* When considering whether a table file is already backed up in a shared part
of backup directory, BackupEngine would already query the sizes of source (DB)
and pre-existing destination (backup) files. BackupEngine now uses these file
sizes to detect corruption, as at least one of (a) old backup, (b) backup in
progress, or (c) current DB is corrupt if there's a size mismatch.
* Justification: a random related fix that also helps to cover a small hole
in corruption checking uncovered by the other functional change:
* For `share_table_files` without "checksum" (not recommended), the other
change regresses in detecting fundamentally unsafe use of this option
combination: when you might generate different versions of same SST file
number. As demonstrated by `BackupableDBTest.FailOverwritingBackups,` this
regression is greatly mitigated by the new file size checking. Nevertheless,
almost no reason to use `share_files_with_checksum=false` should remain, and
comments are updated appropriately.
Also, this change renames internal function `CalculateChecksum` to
`ReadFileAndComputeChecksum` to make the performance impact of this function
clear in code reviews.
It is not clear what 'same_path' is for in backupable_db.cc, and I suspect it
cannot be true for a DB with unique file names (like DBImpl). Nevertheless,
I've tried to keep its functionality intact when `true` to minimize risk for
now, despite having no unit tests for which it is true.
Select impact details (much more in unit tests): For
`share_files_with_checksum`, I am confident there is no regression (vs.
pre-6.12) in detecting DB or backup corruption at backup creation time, mostly
because the old design did not leverage this extra checksum computation for
detecting inconsistencies at backup creation time. (With computed checksums in
names, a recently corrupted file just looked like a different file vs. what was
already backed up.)
Even in the hypothetical case of DB session id collision (~100 bits entropy
collision), file size in name and/or our file size check add an extra layer of
protection against false success in creating an accurate new backup. (Unit test
included.)
`DB::VerifyChecksum` and `BackupEngine::VerifyBackup` with checksum checking
are still able to catch corruptions that `CreateNewBackup` does not. Note that
when custom file checksum support is added to BackupEngine, that will
essentially give the same power as `DB::VerifyChecksum` into `CreateNewBackup`.
We could add options for `CreateNewBackup` to cover some of what would be
caught by `VerifyBackup` with checksum checking.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7413
Test Plan:
Two new unit tests included, both of which fail without these
changes. Although we don't test the I/O improvement directly, we test it
indirectly in DB corruption detection power that was inadvertently unlocked
with new backup file naming PLUS computing current content checksums (now
removed). (I don't think that case of DB corruption detection justifies reading
the whole DB on incremental backup.)
Reviewed By: zhichao-cao
Differential Revision: D23818480
Pulled By: pdillinger
fbshipit-source-id: 148aff16f001af5b9fd4b22f155311c2461f1bac
Summary:
This change reverts BackupEngine to 6.12 state to accommodate a
higher-priority fix that does not easily merge with this custom checksum
support. We intend to reinstate this support soon, by merging a revert
of this change.
For backupable_db_test, I've removed the tests depending on this
feature.
I've also removed relevant HISTORY.md entry.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7411
Test Plan: unit tests
Reviewed By: ajkr
Differential Revision: D23793835
Pulled By: pdillinger
fbshipit-source-id: 7e861436539584799b13d1a8ae559b81b6d08052
Summary:
Prior to 6.12, backup files using share_files_with_checksum had
the file size encoded in the file name, after the last '\_' and before
the last '.'. We considered this an implementation detail subject to
change, and indeed removed this information from the file name (with an
option to use old behavior) because it was considered
ineffective/inefficient for file name uniqueness. However, some
downstream RocksDB users were relying on this information since the file
size is not explicitly in the backup manifest file.
This primary purpose of this change is "retrofitting" the 6.12 release
(not yet a public release) to simultaneously support the benefits of the
new naming scheme (I/O performance and data correctness at scale) and
preserve the file size information, both as default behaviors. With this
change, we are essentially making the file size information encoded in
the file name an official, though obscure, extension of the backup meta
file format.
We preserve an option (kLegacyCrc32cAndFileSize) to use the original
"legacy" naming scheme, with its caveats, and make it easy to omit the
file size information (no kFlagIncludeFileSize), for more compact file
names. But note that changing the naming scheme used on an existing db
and backup directory can lead to transient space amplification, as some
files will be stored under two names in the shared_checksum directory.
Because some backups were saved using the original 6.12 naming scheme,
we offer two ways of dealing with those files: SST files generated by
older 6.12 versions can either use the default naming scheme in effect
when the SST files were generated (kFlagMatchInterimNaming, default, no
transient space amplification) or can use a new naming scheme (no
kFlagMatchInterimNaming, potential space amplification because some
already stored files getting a new name).
We don't have a natural way to detect which files were generated by
previous 6.12 versions, but this change hacks one in by changing DB
session ids to now use a more concise encoding, reducing file name
length, saving ~dozen bytes from SST files, and making them visually
distinct from DB ids so that they are less likely to be mixed up.
Two final auxiliary notes:
Recognizing that the backup file names have become a de facto part of
the backup meta schema, this change makes them easier to parse and
extend by putting a distinct marker, 's', before DB session ids embedded
in the name. When we extend this to allow custom checksums in the name,
they can get their own marker to ensure safe parsing. For backward
compatibility, file size does not get a marker but is assumed for
`_[0-9]+[.]`
Another change from initial 6.12 default behavior is never including
file custom checksum in the file name. Looking ahead to 6.13, we do not
want the default behavior to cause backup space amplification for
someone turning on file custom checksum checking in BackupEngine; we
want that to be an easy decision. When implemented, including file
custom checksums in backup file names will be a non-default option.
Actual file name patterns and priorities, as regexes:
kLegacyCrc32cAndFileSize OR pre-6.12 SST file ->
[0-9]+_[0-9]+_[0-9]+[.]sst
kFlagMatchInterimNaming set (default) AND early 6.12 SST file ->
[0-9]+_[0-9a-fA-F-]+[.]sst
kUseDbSessionId AND NOT kFlagIncludeFileSize ->
[0-9]+_s[0-9A-Z]{20}[.]sst
kUseDbSessionId AND kFlagIncludeFileSize (default) ->
[0-9]+_s[0-9A-Z]{20}_[0-9]+[.]sst
We might add opt-in options for more '\_' separated data in the name,
but embedded file size, if present, will always be after last '\_' and
before '.sst'.
This change was originally applied to version 6.12. (See https://github.com/facebook/rocksdb/issues/7390)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7400
Test Plan:
unit tests included. Sync point callbacks are used to mimic
previous version SST files.
Reviewed By: ajkr
Differential Revision: D23759587
Pulled By: pdillinger
fbshipit-source-id: f62d8af4e0978de0a34f26288cfbe66049b70025
Summary:
(1) Skip check on specific key if restoring an old backup
(small minority of cases) because it can fail in those cases. (2) Remove
an old assertion about number of column families and number of keys
passed in, which is broken by atomic flush (cf_consistency) test. Like
other code (for better or worse) assume a single key and iterate over
column families. (3) Apply mock_direct_io to NewSequentialFile so that
db_stress backup works on /dev/shm.
Also add more context to output in case of backup/restore db_stress
failure.
Also a minor fix to BackupEngine to report first failure status in
creating new backup, and drop another clue about the potential
source of a "Backup failed" status.
Reverts "Disable backup/restore stress test (https://github.com/facebook/rocksdb/issues/7350)"
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7357
Test Plan:
Using backup_one_in=10000,
"USE_CLANG=1 make crash_test_with_atomic_flush" for 30+ minutes
"USE_CLANG=1 make blackbox_crash_test" for 30+ minutes
And with use_direct_reads with TEST_TMPDIR=/dev/shm/rocksdb
Reviewed By: riversand963
Differential Revision: D23567244
Pulled By: pdillinger
fbshipit-source-id: e77171c2e8394d173917e36898c02dead1c40b77
Summary:
This is a "real" fix for the issue worked around in https://github.com/facebook/rocksdb/issues/7294.
To get DB checksum info for live files, we now read the manifest file
that will become part of the checkpoint/backup. This requires a little
extra handling in taking a custom checkpoint, including only reading the
manifest file up to the size prescribed by the checkpoint.
This moves GetFileChecksumsFromManifest from backup code to
file_checksum_helper.{h,cc} and removes apparently unnecessary checking
related to column families.
Updated HISTORY.md and warned potential future users of
DB::GetLiveFilesChecksumInfo()
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7309
Test Plan: updated unit test, before and after
Reviewed By: ajkr
Differential Revision: D23311994
Pulled By: pdillinger
fbshipit-source-id: 741e30a2dc1830e8208f7648fcc8c5f000d4e2d5
Summary:
The flaky test in the title is caused by two problems. First, there is a bug in the BackupEngine that results in skipping computing the default crc32 checksum when `share_table_files` is enabled and the table is already backed up. Second, when `RestoreDBFromBackup` fails and the backup was being restored to the DB directory, it is likely that `RestoreDBFromBackup` has cleaned up the DB directory before it fails, and therefore, files in old backups may collide with files to be backed up if `share_files_with_checksum` is not enabled.
New tests that cover the above problems are added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7254
Test Plan: `./backupable_db_test`
Reviewed By: pdillinger
Differential Revision: D23118715
Pulled By: gg814
fbshipit-source-id: 7be8de912808944be59e93d602c7431a54c079eb
Summary:
A new option `std::shared_ptr<FileChecksumGenFactory> backup_checksum_gen_factory` is added to `BackupableDBOptions`. This allows custom checksum functions to be used for creating, verifying, or restoring backups.
Tests are added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7085
Test Plan: Passed make check
Reviewed By: pdillinger
Differential Revision: D22390756
Pulled By: gg814
fbshipit-source-id: 3b7756ca444c2129844536b91c3ca09f53b6248f
Summary:
BackupEngine requires computing table checksums twice when backing up table files to the `shared_checksum` directory.
The repeated computation can be avoided by utilizing the db session id stored as a part of the table properties.
Filenames of table files in the `shared_checksum` directory depend on the following conditions:
1. the naming scheme is `kOptionalChecksumAndDbSessionId`,
2. `db_session_id` is not empty,
3. checksum is available in the DB manifest.
If 1,2,3 are satisfied, then the filenames will be of the form `<file_number>_<checksum>_<db_session_id>.sst`.
If 1,2 are satisfied, then the filenames will be of the form `<file_number>_<db_session_id>.sst`.
In all other cases, the filenames are of the form `<file_number>_<checksum>_<size>.sst`.
Additionally, if `kOptionalChecksumAndDbSessionId` is used (and not falling back to `kChecksumAndFileSize`), the `<checksum>` appeared in the filenames is hexadecimally encoded, instead of being plain `uint32_t` value.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7110
Test Plan: backupable_db_test and manual tests.
Reviewed By: ajkr
Differential Revision: D22508992
Pulled By: gg814
fbshipit-source-id: 5669f0ea9ad5a097f69f6d87aca4abba15032389
Summary:
Although PR https://github.com/facebook/rocksdb/issues/7032 fixes the construction of the `SstFileDumper` in `GetFileDbIdentities` by setting a proper `Env` of the `Options` passed in the constructor, the file path was not corrected accordingly. This actually disables backup engine to use db session ids in the file names since the `db_session_id` is always empty.
Now it is fixed by setting the correct path in the construction of `SstFileDumper`. Furthermore, to preserve the Direct IO property that backup engine already has, parameter `EnvOptions` is added to `GetFileDbIdentities` and `SstFileDumper`.
The `BackupUsingDirectIO` test is updated accordingly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7104
Test Plan: backupable_db_test and some manual tests.
Reviewed By: ajkr
Differential Revision: D22443245
Pulled By: gg814
fbshipit-source-id: 056a9bb8b82947c5e73d7c3fbb62bfe23af5e562
Summary:
If the corruption of a table file is done before flushing, then db manifest may record the checksum for the corrupted table, which results in "matching checksums" when backup engine tries to verfiy the checksum, and causes a flaky test.
Fix the issue by adding `Flush()` before trying to corrupt a table file in *db*.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7082
Test Plan:
`buck test`
Without the fix, failed 5 of 100 tests.
Suspected whether the pseudo randomness causes the issue: doubling `keys_iteration` resulted in 2 of 100 tests failed; deterministically corrupting tables file also caused 2 of 100 tests to fail.
With the fix, passed 200 of 200 tests.
Reviewed By: pdillinger
Differential Revision: D22375421
Pulled By: gg814
fbshipit-source-id: 7304618e7520684b6087e42d0b58329c5ad18329
Summary:
When table file checksums are enabled and stored in the DB manifest by using the RocksDB default crc32c checksum function, BackupEngine will calculate the crc32c checksum of the file to be copied and compare the calculated result with the one stored in the DB manifest before copying the file to the backup directory.
After copying to the backup directory, BackupEngine will verify the checksum of the copied file with the one calculated before copying. This helps detect some rare corruption events such as bit-flips during the copying process.
No verification with checksums in DB manifest will be performed if the table file checksum function is not the RocksDB default crc32c checksum function.
In addition, If `share_table_files` and `share_files_with_checksum` are true, BackupEngine will compare the checksums computed before and after copying of the table files.
Corresponding tests are added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7015
Test Plan: Passed make check
Reviewed By: pdillinger
Differential Revision: D22165732
Pulled By: gg814
fbshipit-source-id: ee0e8cc397c455eba64545c29380b9d9853588ec
Summary:
GetFileDbIdentities requires either db_id non-null or db_session_id non-null.
Passing nullptr for db_id or db_session_id in CopyOrCreateFile indicates the caller does not want to obtain the value for db_id or db_session_id.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7063
Test Plan:
USE_CLANG=1 make analyze
backupable_db_test
Reviewed By: pdillinger
Differential Revision: D22338497
Pulled By: gg814
fbshipit-source-id: 2aa2dcc14d156b0f99b07d6cf3c731ee088272cd
Summary:
`bool BackupableDBOptions::new_naming_for_backup_files` is updated to `BackupTableNameOption BackupableDBOptions::share_files_with_checksum_naming`, where `BackupTableNameOption` is an `enum` type with two enumerators `kChecksumAndFileSize` and `kChecksumAndFileSize`. This opens up possibilities of extenting the current naming scheme for backup table files. By default, `BackupTableNameOption BackupableDBOptions::share_files_with_checksum_naming` is set to `kChecksumAndDbSessionId`.
Revert `BackupEngine::VerifyBackup` to only check file sizes by default.
Also fix the construction of the `SstFileDumper` in `GetFileDbIdentities` by setting a proper `Env` of the `Options` passed in the constructor.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7032
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D22237763
Pulled By: gg814
fbshipit-source-id: 466902a4e731babd64e30f0e82ca1aa82962e52e
Summary:
A parameter `verify_with_checksum` is added to `BackupEngine::VerifyBackup`, which is true by default. So now `BackupEngine::VerifyBackup` verifies backup files with checksum AND file size by default. When `verify_with_checksum` is false, `BackupEngine::VerifyBackup` only compares file sizes to verify backup files.
Also add a test for the case when corruption does not change the file size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7014
Test Plan: Passed backupable_db_test
Reviewed By: zhichao-cao
Differential Revision: D22165590
Pulled By: gg814
fbshipit-source-id: 606a7450714e868bceb38598c89fd356c6004f4f
Summary:
`BackupableDBOptions::new_naming_for_backup_files` is added. This option is false by default. When it is true, backup table filenames under directory shared_checksum are of the form `<file_number>_<crc32c>_<db_session_id>.sst`.
Note that when this option is true, it comes into effect only when both `share_files_with_checksum` and `share_table_files` are true.
Three new test cases are added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6997
Test Plan: Passed make check.
Reviewed By: ajkr
Differential Revision: D22098895
Pulled By: gg814
fbshipit-source-id: a1d9145e7fe562d71cde7ac995e17cb24fd42e76
Summary:
Mostly uninitialized values: some probably written before use, but some seem like bugs. Also, destructor needs to be virtual, and possible use-after-free in test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6935
Test Plan: make check
Reviewed By: siying
Differential Revision: D21885484
Pulled By: pdillinger
fbshipit-source-id: e2e7cb0a0cf196f2b55edd16f0634e81f6cc8e08
Summary:
* Add missing unit test for schema stability of FileChecksumGenCrc32c
(previously was only comparing to itself)
* A lot of clarifying comments
* Add some assertions for preconditions
* Rename WritableFileWriter::CalculateFileChecksum -> UpdateFileChecksum
* Simplify FileChecksumGenCrc32c with shared functions
* Implement EndianSwapValue to replace unused EndianTransform
And incidentally since I had trouble with 'make check-format' GitHub action disagreeing with local run,
* Output full diagnostic information when 'make check-format' fails in CI
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6861
Test Plan: new unit test passes before & after other changes
Reviewed By: zhichao-cao
Differential Revision: D21667115
Pulled By: pdillinger
fbshipit-source-id: 6a99970f87605aa024fa540c78cd519ff322c3e6
Summary:
When creating a database backup, the background threads will not only consume IO resources by copying files, but also consuming CPU such as by computing checksums. During peak times, the CPU consumption by the background threads might affect online queries.
This PR makes it possible to decrease CPU priority of these threads when creating a new backup.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6602
Test Plan: make check
Reviewed By: siying, zhichao-cao
Differential Revision: D20683216
Pulled By: cheng-chang
fbshipit-source-id: 9978b9ed9488e8ce135e90ca083e5b4b7221fd84
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Changyu Bi