Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
Summary:
This PR adds more callers for table readers. These information are only used for block cache analysis so that we can know which caller accesses a block.
1. It renames the BlockCacheLookupCaller to TableReaderCaller as passing the caller from upstream requires changes to table_reader.h and TableReaderCaller is a more appropriate name.
2. It adds more table reader callers in table/table_reader_caller.h, e.g., kCompactionRefill, kExternalSSTIngestion, and kBuildTable.
This PR is long as it requires modification of interfaces in table_reader.h, e.g., NewIterator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5454
Test Plan: make clean && COMPILE_WITH_ASAN=1 make check -j32.
Differential Revision: D15819451
Pulled By: HaoyuHuang
fbshipit-source-id: b6caa704c8fb96ddd15b9a934b7e7ea87f88092d
Summary:
`Block::restart_index_`, `Block::restarts_`, and `Block::current_` are defined as uint32_t but `BlockBasedTableOptions::block_size` is defined as a size_t so user might see corruption as in https://github.com/facebook/rocksdb/issues/5486.
This PR adds a check in `BlockBasedTableFactory::SanitizeOptions` to disallow such configurations.
yiwu-arbug
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5492
Differential Revision: D15914047
Pulled By: miasantreble
fbshipit-source-id: c943f153d967e15aee7f2795730ab8259e2be201
Summary:
Currently the read-ahead logic for user reads and compaction reads go through different code paths where compaction reads create new table readers and use `ReadaheadRandomAccessFile`. This change is to unify read-ahead logic to use read-ahead in BlockBasedTableReader::InitDataBlock(). As a result of the change `ReadAheadRandomAccessFile` class and `new_table_reader_for_compaction_inputs` option will no longer be used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5431
Test Plan:
make check
Here is the benchmarking - https://gist.github.com/vjnadimpalli/083cf423f7b6aa12dcdb14c858bc18a5
Differential Revision: D15772533
Pulled By: vjnadimpalli
fbshipit-source-id: b71dca710590471ede6fb37553388654e2e479b9
Summary:
The patch brings the semantics of per-block-type read performance
context counters in sync with the generic block_read_count by only
incrementing the counter if the block was actually read from the file.
It also fixes index_block_read_count, which fell victim to the
refactoring in PR https://github.com/facebook/rocksdb/issues/5298.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5484
Test Plan: Extended the unit tests.
Differential Revision: D15887431
Pulled By: ltamasi
fbshipit-source-id: a3889759d0ac5759d56625d692cd828d1b9207a6
Summary:
PR https://github.com/facebook/rocksdb/issues/5298 subtly changed how read options are applied to the index block
during a Get, MultiGet, or iteration. Earlier, only the read_tier option
applied to the index block read; since PR https://github.com/facebook/rocksdb/issues/5298, fill_cache and
verify_checksums also have an effect. This patch restores the earlier
behavior to prevent surprise memory increases for clients due to the
index block not being cached.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5481
Test Plan: make check
Differential Revision: D15883082
Pulled By: ltamasi
fbshipit-source-id: 9a065ec3a6db5a365cf6dd5e95190a20c5756356
Summary:
This PR integrates the block cache tracer into block based table reader. The tracer will write the block cache accesses using the trace_writer. The tracer is null in this PR so that nothing will be logged.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5441
Differential Revision: D15772029
Pulled By: HaoyuHuang
fbshipit-source-id: a64adb92642cd23222e0ba8b10d86bf522b42f9b
Summary:
This PR integrates the block cache tracer class into db_impl.cc.
db_impl.cc contains a member variable of AtomicBlockCacheTraceWriter class and passes its reference to the block_based_table_reader.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5433
Differential Revision: D15728016
Pulled By: HaoyuHuang
fbshipit-source-id: 23d5659e8c82d556833dcc1a5558aac8c1f7db71
Summary:
BlockCacheLookupContext only contains the caller for now.
We will trace block accesses at five places:
1. BlockBasedTable::GetFilter.
2. BlockBasedTable::GetUncompressedDict.
3. BlockBasedTable::MaybeReadAndLoadToCache. (To trace access on data, index, and range deletion block.)
4. BlockBasedTable::Get. (To trace the referenced key and whether the referenced key exists in a fetched data block.)
5. BlockBasedTable::MultiGet. (To trace the referenced key and whether the referenced key exists in a fetched data block.)
We create the context at:
1. BlockBasedTable::Get. (kUserGet)
2. BlockBasedTable::MultiGet. (kUserMGet)
3. BlockBasedTable::NewIterator. (either kUserIterator, kCompaction, or external SST ingestion calls this function.)
4. BlockBasedTable::Open. (kPrefetch)
5. Index/Filter::CacheDependencies. (kPrefetch)
6. BlockBasedTable::ApproximateOffsetOf. (kCompaction or kUserApproximateSize).
I loaded 1 million key-value pairs into the database and ran the readrandom benchmark with a single thread. I gave the block cache 10 GB to make sure all reads hit the block cache after warmup. The throughput is comparable.
Throughput of this PR: 231334 ops/s.
Throughput of the master branch: 238428 ops/s.
Experiment setup:
RocksDB: version 6.2
Date: Mon Jun 10 10:42:51 2019
CPU: 24 * Intel Core Processor (Skylake)
CPUCache: 16384 KB
Keys: 20 bytes each
Values: 100 bytes each (100 bytes after compression)
Entries: 1000000
Prefix: 20 bytes
Keys per prefix: 0
RawSize: 114.4 MB (estimated)
FileSize: 114.4 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: NoCompression
Compression sampling rate: 0
Memtablerep: skip_list
Perf Level: 1
Load command: ./db_bench --benchmarks="fillseq" --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --statistics --cache_index_and_filter_blocks --cache_size=10737418240 --disable_auto_compactions=1 --disable_wal=1 --compression_type=none --min_level_to_compress=-1 --compression_ratio=1 --num=1000000
Run command: ./db_bench --benchmarks="readrandom,stats" --use_existing_db --threads=1 --duration=120 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --statistics --cache_index_and_filter_blocks --cache_size=10737418240 --disable_auto_compactions=1 --disable_wal=1 --compression_type=none --min_level_to_compress=-1 --compression_ratio=1 --num=1000000 --duration=120
TODOs:
1. Create a caller for external SST file ingestion and differentiate the callers for iterator.
2. Integrate tracer to trace block cache accesses.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5421
Differential Revision: D15704258
Pulled By: HaoyuHuang
fbshipit-source-id: 4aa8a55f8cb1576ffb367bfa3186a91d8f06d93a
Summary:
Instead of creating a new DataBlockIterator for every key in a MultiGet batch, reuse it if the next key is in the same block. This results in a small 1-2% cpu improvement.
TEST_TMPDIR=/dev/shm/multiget numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Without the change -
multireadrandom : 3.066 micros/op 326122 ops/sec; (29375968 of 29375968 found)
With the change -
multireadrandom : 3.003 micros/op 332945 ops/sec; (29983968 of 29983968 found)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5314
Differential Revision: D15742108
Pulled By: anand1976
fbshipit-source-id: 220fb0b8eea9a0d602ddeb371528f7af7936d771
Summary:
PR #5111 reduced the number of key comparisons when iterating with
upper/lower bounds; however, this caused a regression for MyRocks.
Reverting to the previous behavior in BlockBasedTableIterator as a hotfix.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5428
Differential Revision: D15721038
Pulled By: ltamasi
fbshipit-source-id: 5450106442f1763bccd17f6cfd648697f2ae8b6c
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
The patch cleans up the handling of cache hit/miss/insertion related
performance counters, get context counters, and statistics by
eliminating some code duplication and factoring out the affected logic
into separate methods. In addition, it makes the semantics of cache hit
metrics more consistent by changing the code so that accessing a
partition of partitioned indexes/filters through a pinned reference no
longer counts as a cache hit.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5408
Differential Revision: D15610883
Pulled By: ltamasi
fbshipit-source-id: ee749c18965077aca971d8f8bee8b24ed8fa76f1
Summary:
It's useful to be able to (optionally) associate key-value pairs with user-provided timestamps. This PR is an early effort towards this goal and continues the work of facebook#4942. A suite of new unit tests exist in DBBasicTestWithTimestampWithParam. Support for timestamp requires the user to provide timestamp as a slice in `ReadOptions` and `WriteOptions`. All timestamps of the same database must share the same length, format, etc. The format of the timestamp is the same throughout the same database, and the user is responsible for providing a comparator function (Comparator) to order the <key, timestamp> tuples. Once created, the format and length of the timestamp cannot change (at least for now).
Test plan (on devserver):
```
$COMPILE_WITH_ASAN=1 make -j32 all
$./db_basic_test --gtest_filter=Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/*
$make check
```
All tests must pass.
We also run the following db_bench tests to verify whether there is regression on Get/Put while timestamp is not enabled.
```
$TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillseq,readrandom -num=1000000
$TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=1000000
```
Repeat for 6 times for both versions.
Results are as follows:
```
| | readrandom | fillrandom |
| master | 16.77 MB/s | 47.05 MB/s |
| PR5079 | 16.44 MB/s | 47.03 MB/s |
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5079
Differential Revision: D15132946
Pulled By: riversand963
fbshipit-source-id: 833a0d657eac21182f0f206c910a6438154c742c
Summary:
The commit makes GetEntryFromCache become a member function. It also makes all its callers become member functions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5394
Differential Revision: D15579222
Pulled By: HaoyuHuang
fbshipit-source-id: 07509c42ee9022dcded54950012bd3bd562aa1ae
Summary:
Many logging related source files are under util/. It will be more structured if they are together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5387
Differential Revision: D15579036
Pulled By: siying
fbshipit-source-id: 3850134ed50b8c0bb40a0c8ae1f184fa4081303f
Summary:
Many methods are passing around pointers to non-const objects when in fact
they do not/should not modify said objects. The patch makes the semantics
clearer and also helps from a thread safety point-of-view by changing some
pointers to pointers-to-const and marking some instance methods as const.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5383
Differential Revision: D15562770
Pulled By: ltamasi
fbshipit-source-id: 89361dadbb8b25bbe54d17e8da28fee24a2419af
Mike Kolupaev