Summary:
Consider the following sequence of events:
1. Db flushed an SST with file number N, appended to MANIFEST, and tried to sync the MANIFEST.
2. Syncing MANIFEST failed and db crashed.
3. Db tried to recover with this MANIFEST. In the meantime, no entry about the newly-flushed SST was found in the MANIFEST. Therefore, RocksDB replayed WAL and tried to flush to an SST file reusing the same file number N. This failed because file system does not support overwrite. Then Db deleted this file.
4. Db crashed again.
5. Db tried to recover. When db read the MANIFEST, there was an entry referencing N.sst. This could happen probably because the append in step 1 finally reached the MANIFEST and became visible. Since N.sst had been deleted in step 3, recovery failed.
It is possible that N.sst created in step 1 is valid. Although step 3 would still fail since the MANIFEST was not synced properly in step 1 and 2, deleting N.sst would make it impossible for the db to recover even if the remaining part of MANIFEST was appended and visible after step 5.
After this PR, in step 3, immediately after recovering from MANIFEST, a new MANIFEST is created, then we find that N.sst is not referenced in the MANIFEST, so we delete it, and we'll not reuse N as file number. Then in step 5, since the new MANIFEST does not contain N.sst, the recovery failure situation in step 5 won't happen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7621
Test Plan:
1. some tests are updated, because these tests assume that new MANIFEST is created after WAL recovery.
2. a new unit test is added in db_basic_test to simulate step 3.
Reviewed By: riversand963
Differential Revision: D24668144
Pulled By: cheng-chang
fbshipit-source-id: 90d7487fbad2bc3714f5ede46ea949895b15ae3b
Summary:
When a WAL is synced, an edit is written to MANIFEST.
After flushing memtables, the obsoleted WALs are piggybacked to MANIFEST while writing the new L0 files to MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7601
Test Plan:
`track_and_verify_wals_in_manifest` is enabled by default for all tests extending `DBBasicTest`, and in db_stress_test.
Unit test `wal_edit_test`, `version_edit_test`, and `version_set_test` are also updated.
Watch all tests to pass.
Reviewed By: ltamasi
Differential Revision: D24553957
Pulled By: cheng-chang
fbshipit-source-id: 66a569ff1bdced38e22900bd240b73113906e040
Summary:
The old flag-based APIs (`BlockBasedTableOptions::pin_l0_filter_and_index_blocks_in_cache` and `BlockBasedTableOptions::pin_top_level_index_and_filter`) were insufficient for our needs. For example, it was impossible to pin only unpartitioned meta-blocks, which could prevent block cache contention when turning on dictionary compression or during a migration to partitioned indexes/filters. It was also impossible to pin all meta-blocks in memory while having predictable memory usage via block cache. If we had continued adding flags to address these scenarios, they would have had significant overlap causing confusion. Instead, this PR deprecates the flags and starts a new API with non-overlapping options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7520
Test Plan:
- new unit test
- added new options to stress/crash test and ran for a while: `$ python tools/db_crashtest.py blackbox --simple --max_key=1000000 -write_buffer_size=1048576 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 --interval=10 -value_size_mult=33 -column_families=1 -reopen=0`
Reviewed By: pdillinger
Differential Revision: D24200034
Pulled By: ajkr
fbshipit-source-id: 3fa7cfc71e7960f7a867511dd6ae5834dd73b13e
Summary:
It's important to make sure no false positive is reported when options.paranoid_file_checks is used. Add it to stress test and a place holder in crash test. It is disabled in crash test as there appears to be a bug causing false positive.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7473
Test Plan: Run crash test
Reviewed By: ajkr
Differential Revision: D24026939
fbshipit-source-id: 89102acb45cf041776775ce44a4eef4b0f3a380c
Summary:
This change reverts BackupEngine to 6.12 state to accommodate a
higher-priority fix that does not easily merge with this custom checksum
support. We intend to reinstate this support soon, by merging a revert
of this change.
For backupable_db_test, I've removed the tests depending on this
feature.
I've also removed relevant HISTORY.md entry.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7411
Test Plan: unit tests
Reviewed By: ajkr
Differential Revision: D23793835
Pulled By: pdillinger
fbshipit-source-id: 7e861436539584799b13d1a8ae559b81b6d08052
Summary:
Prior to 6.12, backup files using share_files_with_checksum had
the file size encoded in the file name, after the last '\_' and before
the last '.'. We considered this an implementation detail subject to
change, and indeed removed this information from the file name (with an
option to use old behavior) because it was considered
ineffective/inefficient for file name uniqueness. However, some
downstream RocksDB users were relying on this information since the file
size is not explicitly in the backup manifest file.
This primary purpose of this change is "retrofitting" the 6.12 release
(not yet a public release) to simultaneously support the benefits of the
new naming scheme (I/O performance and data correctness at scale) and
preserve the file size information, both as default behaviors. With this
change, we are essentially making the file size information encoded in
the file name an official, though obscure, extension of the backup meta
file format.
We preserve an option (kLegacyCrc32cAndFileSize) to use the original
"legacy" naming scheme, with its caveats, and make it easy to omit the
file size information (no kFlagIncludeFileSize), for more compact file
names. But note that changing the naming scheme used on an existing db
and backup directory can lead to transient space amplification, as some
files will be stored under two names in the shared_checksum directory.
Because some backups were saved using the original 6.12 naming scheme,
we offer two ways of dealing with those files: SST files generated by
older 6.12 versions can either use the default naming scheme in effect
when the SST files were generated (kFlagMatchInterimNaming, default, no
transient space amplification) or can use a new naming scheme (no
kFlagMatchInterimNaming, potential space amplification because some
already stored files getting a new name).
We don't have a natural way to detect which files were generated by
previous 6.12 versions, but this change hacks one in by changing DB
session ids to now use a more concise encoding, reducing file name
length, saving ~dozen bytes from SST files, and making them visually
distinct from DB ids so that they are less likely to be mixed up.
Two final auxiliary notes:
Recognizing that the backup file names have become a de facto part of
the backup meta schema, this change makes them easier to parse and
extend by putting a distinct marker, 's', before DB session ids embedded
in the name. When we extend this to allow custom checksums in the name,
they can get their own marker to ensure safe parsing. For backward
compatibility, file size does not get a marker but is assumed for
`_[0-9]+[.]`
Another change from initial 6.12 default behavior is never including
file custom checksum in the file name. Looking ahead to 6.13, we do not
want the default behavior to cause backup space amplification for
someone turning on file custom checksum checking in BackupEngine; we
want that to be an easy decision. When implemented, including file
custom checksums in backup file names will be a non-default option.
Actual file name patterns and priorities, as regexes:
kLegacyCrc32cAndFileSize OR pre-6.12 SST file ->
[0-9]+_[0-9]+_[0-9]+[.]sst
kFlagMatchInterimNaming set (default) AND early 6.12 SST file ->
[0-9]+_[0-9a-fA-F-]+[.]sst
kUseDbSessionId AND NOT kFlagIncludeFileSize ->
[0-9]+_s[0-9A-Z]{20}[.]sst
kUseDbSessionId AND kFlagIncludeFileSize (default) ->
[0-9]+_s[0-9A-Z]{20}_[0-9]+[.]sst
We might add opt-in options for more '\_' separated data in the name,
but embedded file size, if present, will always be after last '\_' and
before '.sst'.
This change was originally applied to version 6.12. (See https://github.com/facebook/rocksdb/issues/7390)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7400
Test Plan:
unit tests included. Sync point callbacks are used to mimic
previous version SST files.
Reviewed By: ajkr
Differential Revision: D23759587
Pulled By: pdillinger
fbshipit-source-id: f62d8af4e0978de0a34f26288cfbe66049b70025
Summary:
This is potentially the cause of failures:
Failure in Destroy restore dir with: IO error: file rmdir: /dev/shm/rocksdb/rocksdb_crashtest_whitebox/.restore13: Directory not empty
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7384
Test Plan: smoke test blackbox_crash_test
Reviewed By: jay-zhuang
Differential Revision: D23685087
Pulled By: pdillinger
fbshipit-source-id: 55f62e9853ce84be1d5ca7d856de867f0f2596ee
Summary:
We can only check key on restored backup if in a stress test
configuration locking the key. (Fixes mismatch seen in backup/restore
with atomic flush.)
TestCheckpoint used a very ugly solution to the same problem: copy-paste
dozens of lines of code with some changes and removals. I removed the
unnecessary implementation and made the existing one simply adaptive,
like TestBackupRestore.
Also made TestBackupRestore clean up dead backup/restore directories on
success.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7373
Test Plan:
blackbox_crash_test_with_atomic_flush for a while,
blackbox_crash_test for a while, with backup and checkpoint 1 in 5k and
only 1k max_keys to stress this area
Reviewed By: ajkr
Differential Revision: D23629057
Pulled By: pdillinger
fbshipit-source-id: d7fe7e2be75aaf3cf974be9540a7c5c5de8b371b
Summary:
(a) Missed a case in updating handling of rand_keys
(b) Only opening restored db with DB::Open so don't (yet)
attempt to open restored BlobDB or TransactionDB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7361
Test Plan: better than being broken
Reviewed By: ajkr
Differential Revision: D23592570
Pulled By: pdillinger
fbshipit-source-id: dd1d999bcc0c852ee77cb6041964ec4abc0fd4fd
Summary:
(1) Skip check on specific key if restoring an old backup
(small minority of cases) because it can fail in those cases. (2) Remove
an old assertion about number of column families and number of keys
passed in, which is broken by atomic flush (cf_consistency) test. Like
other code (for better or worse) assume a single key and iterate over
column families. (3) Apply mock_direct_io to NewSequentialFile so that
db_stress backup works on /dev/shm.
Also add more context to output in case of backup/restore db_stress
failure.
Also a minor fix to BackupEngine to report first failure status in
creating new backup, and drop another clue about the potential
source of a "Backup failed" status.
Reverts "Disable backup/restore stress test (https://github.com/facebook/rocksdb/issues/7350)"
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7357
Test Plan:
Using backup_one_in=10000,
"USE_CLANG=1 make crash_test_with_atomic_flush" for 30+ minutes
"USE_CLANG=1 make blackbox_crash_test" for 30+ minutes
And with use_direct_reads with TEST_TMPDIR=/dev/shm/rocksdb
Reviewed By: riversand963
Differential Revision: D23567244
Pulled By: pdillinger
fbshipit-source-id: e77171c2e8394d173917e36898c02dead1c40b77
Summary:
This change has the crash test randomly select from a few file
checksum implementations, or nullptr, for DB file_checksum_gen_factory.
For compatibility across runs on same DB, each non-null factory can
understand all the other functions, but the default changes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7343
Test Plan:
'make blackbox_crash_test' for a while, including with some
debug output to ensure code is being exercised.
Reviewed By: zhichao-cao
Differential Revision: D23494580
Pulled By: pdillinger
fbshipit-source-id: 73bbc7ca32c1adaf619134c0c830f12894880b8a
Summary:
Although added to db_stress, testing of backup/restore
was never integrated into the crash test, originally concerned about
performance. I've enabled it now and to address the peformance concern,
testing backup/restore is always skipped once the db exceeds a certain
size threshold, default 100MB. This should provide sufficient
opportunity for testing BackupEngine without bogging down everything
else with heavier and heavier operations.
Also fixed backup/restore in db_stress by making sure PurgeOldBackups
can remove manifest files, which are normally kept around for db_stress.
Added more coverage of backup options, and up to three backups being
saved in one backup directory (in some cases).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7348
Test Plan:
ran 'make blackbox_crash_test' for a while, with heightened
probabilitly of taking backups (1/10k). Also confirmed with some debug
output that the code is being covered, TestBackupRestore only takes
a few seconds to complete when triggered, and even at 1/10k and ~50MB
database, there's <,~ 1 thread testing backups at any time.
Reviewed By: ajkr
Differential Revision: D23510835
Pulled By: pdillinger
fbshipit-source-id: b6b8735591808141f81f10773ac31634cf03b6c0
Summary:
This pull request adds the parameter --fs_uri to db_bench and db_stress, creating a composite env combining the default env with a specified registered rocksdb file system.
This makes it easier to develop and test new RocksDB FileSystems.
The pull request also registers the posix file system for testing purposes.
Examples:
```
$./db_bench --fs_uri=posix:// --benchmarks=fillseq
$./db_stress --fs_uri=zenfs://nullb1
```
zenfs is a RocksDB FileSystem I'm developing to add support for zoned block devices, and in that case the zoned block device is specified in the uri (a zoned null block device in the above example).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6878
Reviewed By: siying
Differential Revision: D23023063
Pulled By: ajkr
fbshipit-source-id: 8b3fe7193ce45e683043b021779b7a4d547af247
Summary:
The mechanism to mark files for compaction is most commonly used in
delete-triggered compaction. This PR adds an option to exercise the
marking mechanism on random files created by db_stress. This PR also
enables that option in db_crashtest.py on its db_stress runs at random.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7231
Test Plan:
- ran some minified crash tests; verified they succeed and we see `"compaction_reason": "FilesMarkedForCompaction"` regularly in the logs.
```
$ TEST_TMPDIR=/dev/shm python tools/db_crashtest.py blackbox --duration=600 --interval=30 --max_key=10000000 --write_buffer_size=1048576 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --value_size_mult=33
$ TEST_TMPDIR=/dev/shm python tools/db_crashtest.py whitebox --duration=600 --interval=30 --max_key=1000000 --write_buffer_size=1048576 --target_file_size_base=1048576 --max_bytes_for_level_base=4194304 --value_size_mult=33 --random_kill_odd=8887
```
Reviewed By: anand1976
Differential Revision: D23025156
Pulled By: ajkr
fbshipit-source-id: a404c467ebc12afa94dae35956ea9b372f592a96
Summary:
Cleans up some of the dependencies on test code in the Makefile while building tools:
- Moves the test::RandomString, DBBaseTest::RandomString into Random
- Moves the test::RandomHumanReadableString into Random
- Moves the DestroyDir method into file_utils
- Moves the SetupSyncPointsToMockDirectIO into sync_point.
- Moves the FaultInjection Env and FS classes under env
These changes allow all of the tools to build without dependencies on test_util, thereby simplifying the build dependencies. By moving the FaultInjection code, the dependency in db_stress on different libraries for debug vs release was eliminated.
Tested both release and debug builds via Make and CMake for both static and shared libraries.
More work remains to clean up how the tools are built and remove some unnecessary dependencies. There is also more work that should be done to get the Makefile and CMake to align in their builds -- what is in the libraries and the sizes of the executables are different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7097
Reviewed By: riversand963
Differential Revision: D22463160
Pulled By: pdillinger
fbshipit-source-id: e19462b53324ab3f0b7c72459dbc73165cc382b2
Summary:
Delicious copy-pasta from https://github.com/facebook/rocksdb/issues/7039
Also fixing DestroyDir to allow files to go missing while it is operating. This seems to fix failures I got with test plan reproducer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7103
Test Plan:
make blackbox_crash_test_with_atomic_flush for a while with
checkpoint_one_in=100
Reviewed By: siying
Differential Revision: D22435315
Pulled By: pdillinger
fbshipit-source-id: 0ec0538402493887aeda43ecc03f32979cb84ced
Summary:
Change the linking of tests/tools to be against a library rather than a list of objects. This change substantially reduces the size of the objects produced.
peterd clean repo size: 264M
Before this change, with make all: 40G
After this change, with make all: 28G
With make LIB_MODE=shared all: 7.0G
The list of TESTS was changed from being hard-coded to generated from the test sources variable. Note that there are some test sources that are not built as tests (though the set of tests is identical to the previous version).
Added OBJ_DIR option to Makefile to allow objects to be placed in an alternative location. By default, OBJ_DIR is the same as before ("./").
This change is a precursor to being able to build/run the tests/tools linked against static libraries. Additionally, it should be possible to clean up and merge some of the rules for building tests and the like if so desired.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6660
Reviewed By: riversand963
Differential Revision: D22244463
Pulled By: pdillinger
fbshipit-source-id: db9c6341d81ed62c2270374f4ede02fb9604c754
Summary:
There are errors like `Transaction put: Operation timed out: Timeout waiting to lock key
terminate called without an active exception`, based on experiment on devserver, increasing timeouts can resolve the issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7056
Test Plan: watch stress test with txn.
Reviewed By: anand1976
Differential Revision: D22317265
Pulled By: cheng-chang
fbshipit-source-id: 2dc3352def5e78d2c39a18d7262a3a65ca98bbba
Summary:
We see crash test occassionally fails with "A checkpoint operation failed with: Invalid argument: Directory exists". The suspicious is that the directory fails to be deleted because some trash files. Deep clean the directory after a DestroyDB() call.
Also add more debugging printf in case it fails.
Also, preserve the DB if verification fails.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7039
Test Plan: Run db_stress with low --checkpoint_one_in value
Reviewed By: riversand963
Differential Revision: D22271694
fbshipit-source-id: 6a9b2abb664fc69a4dc666741df4f6b23703cd6d
Summary:
New experimental option BBTO::optimize_filters_for_memory builds
filters that maximize their use of "usable size" from malloc_usable_size,
which is also used to compute block cache charges.
Rather than always "rounding up," we track state in the
BloomFilterPolicy object to mix essentially "rounding down" and
"rounding up" so that the average FP rate of all generated filters is
the same as without the option. (YMMV as heavily accessed filters might
be unluckily lower accuracy.)
Thus, the option near-minimizes what the block cache considers as
"memory used" for a given target Bloom filter false positive rate and
Bloom filter implementation. There are no forward or backward
compatibility issues with this change, though it only works on the
format_version=5 Bloom filter.
With Jemalloc, we see about 10% reduction in memory footprint (and block
cache charge) for Bloom filters, but 1-2% increase in storage footprint,
due to encoding efficiency losses (FP rate is non-linear with bits/key).
Why not weighted random round up/down rather than state tracking? By
only requiring malloc_usable_size, we don't actually know what the next
larger and next smaller usable sizes for the allocator are. We pick a
requested size, accept and use whatever usable size it has, and use the
difference to inform our next choice. This allows us to narrow in on the
right balance without tracking/predicting usable sizes.
Why not weight history of generated filter false positive rates by
number of keys? This could lead to excess skew in small filters after
generating a large filter.
Results from filter_bench with jemalloc (irrelevant details omitted):
(normal keys/filter, but high variance)
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9
Build avg ns/key: 29.6278
Number of filters: 5516
Total size (MB): 200.046
Reported total allocated memory (MB): 220.597
Reported internal fragmentation: 10.2732%
Bits/key stored: 10.0097
Average FP rate %: 0.965228
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory
Build avg ns/key: 30.5104
Number of filters: 5464
Total size (MB): 200.015
Reported total allocated memory (MB): 200.322
Reported internal fragmentation: 0.153709%
Bits/key stored: 10.1011
Average FP rate %: 0.966313
(very few keys / filter, optimization not as effective due to ~59 byte
internal fragmentation in blocked Bloom filter representation)
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9
Build avg ns/key: 29.5649
Number of filters: 162950
Total size (MB): 200.001
Reported total allocated memory (MB): 224.624
Reported internal fragmentation: 12.3117%
Bits/key stored: 10.2951
Average FP rate %: 0.821534
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory
Build avg ns/key: 31.8057
Number of filters: 159849
Total size (MB): 200
Reported total allocated memory (MB): 208.846
Reported internal fragmentation: 4.42297%
Bits/key stored: 10.4948
Average FP rate %: 0.811006
(high keys/filter)
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9
Build avg ns/key: 29.7017
Number of filters: 164
Total size (MB): 200.352
Reported total allocated memory (MB): 221.5
Reported internal fragmentation: 10.5552%
Bits/key stored: 10.0003
Average FP rate %: 0.969358
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory
Build avg ns/key: 30.7131
Number of filters: 160
Total size (MB): 200.928
Reported total allocated memory (MB): 200.938
Reported internal fragmentation: 0.00448054%
Bits/key stored: 10.1852
Average FP rate %: 0.963387
And from db_bench (block cache) with jemalloc:
$ ./db_bench -db=/dev/shm/dbbench.no_optimize -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false
$ ./db_bench -db=/dev/shm/dbbench -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -optimize_filters_for_memory -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false
$ (for FILE in /dev/shm/dbbench.no_optimize/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }'
17063835
$ (for FILE in /dev/shm/dbbench/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }'
17430747
$ #^ 2.1% additional filter storage
$ ./db_bench -db=/dev/shm/dbbench.no_optimize -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000
rocksdb.block.cache.index.add COUNT : 33
rocksdb.block.cache.index.bytes.insert COUNT : 8440400
rocksdb.block.cache.filter.add COUNT : 33
rocksdb.block.cache.filter.bytes.insert COUNT : 21087528
rocksdb.bloom.filter.useful COUNT : 4963889
rocksdb.bloom.filter.full.positive COUNT : 1214081
rocksdb.bloom.filter.full.true.positive COUNT : 1161999
$ #^ 1.04 % observed FP rate
$ ./db_bench -db=/dev/shm/dbbench -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -optimize_filters_for_memory -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000
rocksdb.block.cache.index.add COUNT : 33
rocksdb.block.cache.index.bytes.insert COUNT : 8448592
rocksdb.block.cache.filter.add COUNT : 33
rocksdb.block.cache.filter.bytes.insert COUNT : 18220328
rocksdb.bloom.filter.useful COUNT : 5360933
rocksdb.bloom.filter.full.positive COUNT : 1321315
rocksdb.bloom.filter.full.true.positive COUNT : 1262999
$ #^ 1.08 % observed FP rate, 13.6% less memory usage for filters
(Due to specific key density, this example tends to generate filters that are "worse than average" for internal fragmentation. "Better than average" cases can show little or no improvement.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6427
Test Plan: unit test added, 'make check' with gcc, clang and valgrind
Reviewed By: siying
Differential Revision: D22124374
Pulled By: pdillinger
fbshipit-source-id: f3e3aa152f9043ddf4fae25799e76341d0d8714e
Summary:
Avoid using `cf_consistency` together with `enable_compaction_filter` as
the former heavily uses snapshots while the latter is incompatible with
snapshots.
Also fix a clang-analyze error for a write to a variable that is never
read.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7006
Reviewed By: zhichao-cao
Differential Revision: D22141679
Pulled By: ajkr
fbshipit-source-id: 1840ae238168818a9ab5973f90fd78c067399447
Summary:
Added a `CompactionFilter` that is aware of the stress test's expected state. It only drops key versions that are already covered according to the expected state. It is incompatible with snapshots (same as all `CompactionFilter`s), so disables all snapshot-related features when used in the crash test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6988
Test Plan:
running a minified blackbox crash test
```
$ TEST_TMPDIR=/dev/shm python tools/db_crashtest.py blackbox --max_key=1000000 -write_buffer_size=1048576 -max_bytes_for_level_base=4194304 -target_file_size_base=1048576 -value_size_mult=33 --interval=10 --duration=3600
```
Reviewed By: anand1976
Differential Revision: D22072888
Pulled By: ajkr
fbshipit-source-id: 727b9d7a90d5eab18be0ec6cd5a810712ac13320
Summary:
Add crash test for the case of best-efforts recovery.
After a certain amount of time, we kill the db_stress process, randomly delete some certain table files and restart db_stress. Given the randomness of file deletion, it is difficult to verify against a reference for data correctness. Therefore, we just check that the db can restart successfully.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6819
Test Plan:
```
./db_stress -best_efforts_recovery=true -disable_wal=1 -reopen=0
./db_stress -best_efforts_recovery=true -disable_wal=0 -skip_verifydb=1 -verify_db_one_in=0 -continuous_verification_interval=0
make crash_test_with_best_efforts_recovery
```
Reviewed By: anand1976
Differential Revision: D21436753
Pulled By: riversand963
fbshipit-source-id: 0b3605c922a16c37ed17d5ab6682ca4240e47926
Summary:
x.size() -1 or y - 1 can overflow to an extremely large value when x.size() pr y is 0 when they are unsigned type. The end condition of i in the for loop will be extremely large, potentially causes segment fault. Fix them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6902
Test Plan: pass make asan_check
Reviewed By: ajkr
Differential Revision: D21843767
Pulled By: zhichao-cao
fbshipit-source-id: 5b8b88155ac5a93d86246d832e89905a783bb5a1
Summary:
In NoBatchedOpsStress::TestMultiGet, call txn->Get() when transactions
are in use.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6860
Test Plan: make crash_test_with_txn
Reviewed By: pdillinger
Differential Revision: D21667249
Pulled By: anand1976
fbshipit-source-id: 194bd7b9630a8efc3ae29d85422a61214e9e200e
Summary:
Add MultiGet to VerifyDb and check consistency with Get in TestMultiGet.
Test plan -
make crash_test
ASAN crash test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6849
Reviewed By: pdillinger
Differential Revision: D21635011
Pulled By: anand1976
fbshipit-source-id: deb5a79d08fefd8d8010204f1f20b83adc92310e
Summary:
This commit adds an `compression_parallel_threads` option in
db_stress. It also fixes the naming of parallel compression
option in db_bench to keep it aligned with others.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6722
Reviewed By: pdillinger
Differential Revision: D21091385
fbshipit-source-id: c9ba8c4e5cc327ff9e6094a6dc6a15fcff70f100
Summary:
In crash test, the db directory might be set to /dev/shm or /tmp, in certain environments such as internal testing infrastructure, neither of these directories support direct IO, so direct IO is never enabled in crash test.
This PR sets up SyncPoints in direct IO related code paths to disable O_DIRECT flag in calls to `open`, so the direct IO code paths will be executed, all direct IO related assertions will be checked, but no real direct IO request will be issued to the file system.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6727
Test Plan:
export CRASH_TEST_EXT_ARGS="--use_direct_reads=1 --mmap_read=0"
make -j24 crash_test
Reviewed By: zhichao-cao
Differential Revision: D21139250
Pulled By: cheng-chang
fbshipit-source-id: db9adfe78d91aa4759835b1af91c5db7b27b62ee
Summary:
Options.avoid_flush_during_recovery is uncovered in crash_test. Add the coverage with a chance of 1/8, as it is a less frequently used options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6712
Test Plan: Run crash_test and see the option can be used or not used by chance.
Reviewed By: ltamasi
Differential Revision: D21056566
fbshipit-source-id: c3b1521517cfc204786e6ef8c6acd7fffda64793
Summary:
Add env_fault_injection argument to db_stress. When enabled,
FaultInjectionTestEnv will be used instead. Currently this
option does not support running with other env setting.
This will allow
us to later manually produce error when running db_crashtest.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6687
Test Plan:
make db_stress -j32
./db_stress --env_fault_injection
./db_stress --env_fault_injection --hdfs // expect error message
Reviewed By: ajkr
Differential Revision: D21014683
Pulled By: yhchiang
fbshipit-source-id: 0724aeac37efd57adb72a37defe6dbd3bfa8106a
Summary:
This was causing db_crashtest.py to wrongly assume an error by parsing the output. Hopefully this will stabilize the crash tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6705
Test Plan: make blackbox_crash_test
Reviewed By: ltamasi
Differential Revision: D21043335
Pulled By: anand1976
fbshipit-source-id: 5cddd112b124d4e2ebd11724a17d4ef0f50c1cf8
Summary:
1. Fix a memory leak in FaultInjectionTestFS in the stack trace related
code
2. Check status of all MultiGet keys before deciding whether an error
was swallowed, instead of assuming an ok status for any key means an
undetected error
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6700
Test Plan: Run db_stress with asan and fault injection
Reviewed By: cheng-chang
Differential Revision: D21021498
Pulled By: anand1976
fbshipit-source-id: 489191efd1ab0fa834923a1e1d57253a7a315465
Summary:
This PR implements a fault injection mechanism for injecting errors in reads in db_stress. The FaultInjectionTestFS is used for this purpose. A thread local structure is used to track the errors, so that each db_stress thread can independently enable/disable error injection and verify observed errors against expected errors. This is initially enabled only for Get and MultiGet, but can be extended to iterator as well once its proven stable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6538
Test Plan:
crash_test
make check
Reviewed By: riversand963
Differential Revision: D20714347
Pulled By: anand1976
fbshipit-source-id: d7598321d4a2d72bda0ced57411a337a91d87dc7
Summary:
Currently, `db_stress` tests a randomly picked one of `GetLiveFiles`,
`GetSortedWalFiles`, and `GetCurrentWalFile` with a 1/N chance when the
command line parameter `get_live_files_and_wal_files_one_in` is specified.
The problem is that `GetSortedWalFiles` and `GetCurrentWalFile` are unreliable
in the sense that they can return errors if another thread removes a WAL file
while they are executing (which is a perfectly plausible and legitimate scenario).
The patch splits this command line parameter into three (one for each API),
and changes the crash test script so that only `GetLiveFiles` is tested during
our continuous crash test runs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6491
Test Plan:
```
make check
python tools/db_crashtest.py whitebox
```
Reviewed By: siying
Differential Revision: D20312200
Pulled By: ltamasi
fbshipit-source-id: e7c3481eddfe3bd3d5349476e34abc9eee5b7dc8
Summary:
When using custom Env, trying to call DestroyDB() with default Options will
fail.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6539
Test Plan: ./db_stress
Differential Revision: D20476204
Pulled By: riversand963
fbshipit-source-id: 612c6754660cc9b5bb3e9c2dbb2f6ecd7f648797
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Cheng Chang