Summary:
For our default block cache, each additional entry has extra memory overhead. It include LRUHandle (72 bytes currently) and the cache key (two varint64, file id and offset). The usage is not negligible. For example for block_size=4k, the overhead accounts for an extra 2% memory usage for the cache. The patch charging the cache for the extra usage, reducing untracked memory usage outside block cache. The feature is enabled by default and can be disabled by passing kDontChargeCacheMetadata to the cache constructor.
This PR builds up on https://github.com/facebook/rocksdb/issues/4258
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5797
Test Plan:
- Existing tests are updated to either disable the feature when the test has too much dependency on the old way of accounting the usage or increasing the cache capacity to account for the additional charge of metadata.
- The Usage tests in cache_test.cc are augmented to test the cache usage under kFullChargeCacheMetadata.
Differential Revision: D17396833
Pulled By: maysamyabandeh
fbshipit-source-id: 7684ccb9f8a40ca595e4f5efcdb03623afea0c6f
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022
Differential Revision: D14394062
Pulled By: miasantreble
fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
Summary:
This is a new API added to db.h to allow for fetching all merge operands associated with a Key. The main motivation for this API is to support use cases where doing a full online merge is not necessary as it is performance sensitive. Example use-cases:
1. Update subset of columns and read subset of columns -
Imagine a SQL Table, a row is encoded as a K/V pair (as it is done in MyRocks). If there are many columns and users only updated one of them, we can use merge operator to reduce write amplification. While users only read one or two columns in the read query, this feature can avoid a full merging of the whole row, and save some CPU.
2. Updating very few attributes in a value which is a JSON-like document -
Updating one attribute can be done efficiently using merge operator, while reading back one attribute can be done more efficiently if we don't need to do a full merge.
----------------------------------------------------------------------------------------------------
API :
Status GetMergeOperands(
const ReadOptions& options, ColumnFamilyHandle* column_family,
const Slice& key, PinnableSlice* merge_operands,
GetMergeOperandsOptions* get_merge_operands_options,
int* number_of_operands)
Example usage :
int size = 100;
int number_of_operands = 0;
std::vector<PinnableSlice> values(size);
GetMergeOperandsOptions merge_operands_info;
db_->GetMergeOperands(ReadOptions(), db_->DefaultColumnFamily(), "k1", values.data(), merge_operands_info, &number_of_operands);
Description :
Returns all the merge operands corresponding to the key. If the number of merge operands in DB is greater than merge_operands_options.expected_max_number_of_operands no merge operands are returned and status is Incomplete. Merge operands returned are in the order of insertion.
merge_operands-> Points to an array of at-least merge_operands_options.expected_max_number_of_operands and the caller is responsible for allocating it. If the status returned is Incomplete then number_of_operands will contain the total number of merge operands found in DB for key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5604
Test Plan:
Added unit test and perf test in db_bench that can be run using the command:
./db_bench -benchmarks=getmergeoperands --merge_operator=sortlist
Differential Revision: D16657366
Pulled By: vjnadimpalli
fbshipit-source-id: 0faadd752351745224ee12d4ae9ef3cb529951bf
Summary:
RocksDB has historically stored uncompression dictionary objects in the block
cache as opposed to storing just the block contents. This neccesitated
evicting the object upon table close. With the new code, only the raw blocks
are stored in the cache, eliminating the need for eviction.
In addition, the patch makes the following improvements:
1) Compression dictionary blocks are now prefetched/pinned similarly to
index/filter blocks.
2) A copy operation got eliminated when the uncompression dictionary is
retrieved.
3) Errors related to retrieving the uncompression dictionary are propagated as
opposed to silently ignored.
Note: the patch temporarily breaks the compression dictionary evicition stats.
They will be fixed in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5584
Test Plan: make asan_check
Differential Revision: D16344151
Pulled By: ltamasi
fbshipit-source-id: 2962b295f5b19628f9da88a3fcebbce5a5017a7b
Summary:
This PR traces the referenced key for Get for all types of blocks. This is useful when evaluating hybrid row-block caches.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5548
Test Plan: make clean && USE_CLANG=1 make check -j32
Differential Revision: D16157979
Pulled By: HaoyuHuang
fbshipit-source-id: f6327411c9deb74e35e22a35f66cdbae09ab9d87
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
Summary:
This PR associates a unique id with Get and MultiGet. This enables us to track how many blocks a Get/MultiGet request accesses. We can also measure the impact of row cache vs block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5514
Test Plan: make clean && COMPILE_WITH_ASAN=1 make check -j32
Differential Revision: D16032681
Pulled By: HaoyuHuang
fbshipit-source-id: 775b05f4440badd58de6667e3ec9f4fc87a0af4c
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
Summary:
This PR adds more callers for table readers. These information are only used for block cache analysis so that we can know which caller accesses a block.
1. It renames the BlockCacheLookupCaller to TableReaderCaller as passing the caller from upstream requires changes to table_reader.h and TableReaderCaller is a more appropriate name.
2. It adds more table reader callers in table/table_reader_caller.h, e.g., kCompactionRefill, kExternalSSTIngestion, and kBuildTable.
This PR is long as it requires modification of interfaces in table_reader.h, e.g., NewIterator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5454
Test Plan: make clean && COMPILE_WITH_ASAN=1 make check -j32.
Differential Revision: D15819451
Pulled By: HaoyuHuang
fbshipit-source-id: b6caa704c8fb96ddd15b9a934b7e7ea87f88092d
Summary:
Currently the read-ahead logic for user reads and compaction reads go through different code paths where compaction reads create new table readers and use `ReadaheadRandomAccessFile`. This change is to unify read-ahead logic to use read-ahead in BlockBasedTableReader::InitDataBlock(). As a result of the change `ReadAheadRandomAccessFile` class and `new_table_reader_for_compaction_inputs` option will no longer be used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5431
Test Plan:
make check
Here is the benchmarking - https://gist.github.com/vjnadimpalli/083cf423f7b6aa12dcdb14c858bc18a5
Differential Revision: D15772533
Pulled By: vjnadimpalli
fbshipit-source-id: b71dca710590471ede6fb37553388654e2e479b9
Summary:
The patch brings the semantics of per-block-type read performance
context counters in sync with the generic block_read_count by only
incrementing the counter if the block was actually read from the file.
It also fixes index_block_read_count, which fell victim to the
refactoring in PR https://github.com/facebook/rocksdb/issues/5298.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5484
Test Plan: Extended the unit tests.
Differential Revision: D15887431
Pulled By: ltamasi
fbshipit-source-id: a3889759d0ac5759d56625d692cd828d1b9207a6
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
https://github.com/facebook/rocksdb/pull/5256 broke it: `block_iter_.user_key()` may not be valid even if `block_iter_points_to_real_block_` is true. E.g. if there was an IO error or Status::Incomplete.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5291
Differential Revision: D15273324
Pulled By: al13n321
fbshipit-source-id: 442e5b09f9884a58f92a6ac1ca93af719c219886
Summary:
This is second attempt for #5101. Original commit message:
`BlockBasedTableIterator` avoid reading next block on `Next()` if it detects the iterator will be out of bound, by checking against index key. The optimization was added in #2239, and by the time it only check the bound per block. It seems later change make it a per-key check, which introduce unnecessary key comparisons.
This patch come with two fixes:
Fix 1: To optimize checking for bounds, we need comparing the bounds with index key as well. However BlockBasedTableIterator doesn't know whether its index iterator is internally using user keys or internal keys. The patch fixes that by extending InternalIterator with a user_key() function that is overridden by In IndexBlockIter.
Fix 2: In #5101 we return `IsOutOfBound()=true` when block index key is out of bound. But the index key can be larger than smallest key of the next file on the level. That file can be within upper bound and should not be filtered out.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5142
Differential Revision: D14907113
Pulled By: siying
fbshipit-source-id: ac95775c5b4e7b700f76ab43e39f45402c98fbfb
Summary:
The uncompression dictionary object has a Statistics pointer that might
dangle if the database closed. This patch evicts the dictionary from the
block cache when a table is closed, similarly to how index and filter
readers are handled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5150
Differential Revision: D14782422
Pulled By: ltamasi
fbshipit-source-id: 0cec9336c742c479aa92206e04521767f1aa9622
Summary:
This reverts commit f29dc1b906.
In BlockBasedTableIterator, index_iter_->key() is sometimes a user key, so it is wrong to call ExtractUserKey() against it. This is a bug introduced by #5101.
Temporarily revert the diff to keep the branch clean.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5132
Differential Revision: D14718584
Pulled By: siying
fbshipit-source-id: 0ac55dc9b5dbc18c7809092146bdf7eb9364b9ad
Summary:
`BlockBasedTableIterator` avoid reading next block on `Next()` if it detects the iterator will be out of bound, by checking against index key. The optimization was added in #2239, and by the time it only check the bound per block. It seems later change make it a per-key check, which introduce unnecessary key comparisons.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5101
Differential Revision: D14678707
Pulled By: siying
fbshipit-source-id: 2372446116753c7892ea4cec7b4b49ef87ba463e
Summary:
This is a feature to sample data-block compressibility and and report them as stats. 1 in N (tunable) blocks is sampled for compressibility using two algorithms:
1. lz4 or snappy for fast compression
2. zstd or zlib for slow but higher compression.
The stats are reported to the caller as raw-bytes and compressed-bytes. The block continues to be compressed for storage using the specified CompressionType.
The db_bench_tool how has a command line option for specifying the sampling rate. It's default value is 0 (no sampling). To test the overhead for a certain value, users can compare the performance of db_bench_tool, varying the sampling rate. It is unlikely to have a noticeable impact for high values like 20.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4842
Differential Revision: D13629011
Pulled By: shobhitdayal
fbshipit-source-id: 14ca668bcab6499b2a1734edf848eb62a4f4fafa
Summary:
Right now, users can change statistics.stats_level while DB is running, but TSAN may report
data race. We make stats_level_ to be atomic, and access them using accessors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5030
Differential Revision: D14267519
Pulled By: siying
fbshipit-source-id: 37d7ebeff7a43a406230143422a16af899163f73
Summary:
Our previous approach was to train one compression dictionary per compaction, using the first output SST to train a dictionary, and then applying it on subsequent SSTs in the same compaction. While this was great for minimizing CPU/memory/I/O overhead, it did not achieve good compression ratios in practice. In our most promising potential use case, moderate reductions in a dictionary's scope make a major difference on compression ratio.
So, this PR changes compression dictionary to be scoped per-SST. It accepts the tradeoff during table building to use more memory and CPU. Important changes include:
- The `BlockBasedTableBuilder` has a new state when dictionary compression is in-use: `kBuffered`. In that state it accumulates uncompressed data in-memory whenever `Add` is called.
- After accumulating target file size bytes or calling `BlockBasedTableBuilder::Finish`, a `BlockBasedTableBuilder` moves to the `kUnbuffered` state. The transition (`EnterUnbuffered()`) involves sampling the buffered data, training a dictionary, and compressing/writing out all buffered data. In the `kUnbuffered` state, a `BlockBasedTableBuilder` behaves the same as before -- blocks are compressed/written out as soon as they fill up.
- Samples are now whole uncompressed data blocks, except the final sample may be a partial data block so we don't breach the user's configured `max_dict_bytes` or `zstd_max_train_bytes`. The dictionary trainer is supposed to work better when we pass it real units of compression. Previously we were passing 64-byte KV samples which was not realistic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4952
Differential Revision: D13967980
Pulled By: ajkr
fbshipit-source-id: 82bea6f7537e1529c7a1a4cdee84585f5949300f
Summary:
- If block cache disabled or not used for meta-blocks, `BlockBasedTableReader::Rep::uncompression_dict` owns the `UncompressionDict`. It is preloaded during `PrefetchIndexAndFilterBlocks`.
- If block cache is enabled and used for meta-blocks, block cache owns the `UncompressionDict`, which holds dictionary and digested dictionary when needed. It is never prefetched though there is a TODO for this in the code. The cache key is simply the compression dictionary block handle.
- New stats for compression dictionary accesses in block cache: "BLOCK_CACHE_COMPRESSION_DICT_*" and "compression_dict_block_read_count"
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4881
Differential Revision: D13663801
Pulled By: ajkr
fbshipit-source-id: bdcc54044e180855cdcc57639b493b0e016c9a3f
Summary:
Fix block based table reader not using memory_allocator when allocating index blocks and compression dictionary blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4678
Differential Revision: D13054594
Pulled By: yiwu-arbug
fbshipit-source-id: 379f25bcc665395662511c4f873f4b7b55104ce2
Summary:
Removed `one_time_use` flag, which removed the need for some
tests, and changed all `NewRangeTombstoneIterator` methods to return
`FragmentedRangeTombstoneIterators`.
These changes also led to removing `RangeDelAggregatorV2::AddUnfragmentedTombstones`
and one of the `MemTableListVersion::AddRangeTombstoneIterators` methods.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4692
Differential Revision: D13106570
Pulled By: abhimadan
fbshipit-source-id: cbab5432d7fc2d9cdfd8d9d40361a1bffaa8f845
Summary:
…ons (#4676)"
This reverts commit b32d087dbb.
`MemoryAllocator` needs to be with `Cache`, since cache entry can
outlive DB and block based table. The cache needs to hold reference to
memory allocator when deleting cache entry.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4697
Differential Revision: D13133490
Pulled By: yiwu-arbug
fbshipit-source-id: 8ef7e8a51263bfd929f892fd062665ff4ce9ce5a
Summary:
We carry compression type and "cachable" variables for every block in the block cache, while they take well-known values. 8-byte is wasted for each block (2-byte for useful information but it takes 8 bytes because of padding). With this change, these two variables are removed.
The cachable information is only useful in the process of reading the block. We use other information to infer from it. For compressed blocks, the compression type is a part of the block content itself so we can get it from there.
Some code is slightly refactored so that the cachable information can flow better.
Another change is to only use class BlockContents for compressed block, and narrow the class Block to only be used for uncompressed blocks, including blocks in compressed block cache. This can make the Block class less confusing. It also saves tens of bytes for each block in compressed block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4650
Differential Revision: D12969070
Pulled By: siying
fbshipit-source-id: 548b62724e9eb66993026429fd9c7c3acd1f95ed
Summary:
Per offline discussion with siying, `MemoryAllocator` and `Cache` should be decouple. The idea is that memory allocator handles memory allocation, while cache handle cache policy.
It is normal that external cache libraries pack couple the two components for better optimization. If we want to integrate with such library in the future, we can make a wrapper of the library implementing both `Cache` and `MemoryAllocator` interface.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4676
Differential Revision: D13047662
Pulled By: yiwu-arbug
fbshipit-source-id: cd42e246d80ab600b4de47d073f7d2db308ce6dd
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
valgrind tests with 1 thread run too long. To make it shorter, black list some long tests. These are already blacklisted in parallel valgrind tests, but they are not in non-parallel mode
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4642
Differential Revision: D12945237
Pulled By: siying
fbshipit-source-id: 04cf977d435996480fe87aa09f14b17975b74f7d
Summary:
Rename the interface, as it is mean to be a generic interface for memory allocation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4590
Differential Revision: D10866340
Pulled By: yiwu-arbug
fbshipit-source-id: 85cb753351a40cb856c046aeaa3f3b369eef3d16
Summary:
This allows tombstone fragmenting to only be performed when the table is opened, and cached for subsequent accesses.
On the same DB used in #4449, running `readrandom` results in the following:
```
readrandom : 0.983 micros/op 1017076 ops/sec; 78.3 MB/s (63103 of 100000 found)
```
Now that Get performance in the presence of range tombstones is reasonable, I also compared the performance between a DB with range tombstones, "expanded" range tombstones (several point tombstones that cover the same keys the equivalent range tombstone would cover, a common workaround for DeleteRange), and no range tombstones. The created DBs had 5 million keys each, and DeleteRange was called at regular intervals (depending on the total number of range tombstones being written) after 4.5 million Puts. The table below summarizes the results of a `readwhilewriting` benchmark (in order to provide somewhat more realistic results):
```
Tombstones? | avg micros/op | stddev micros/op | avg ops/s | stddev ops/s
----------------- | ------------- | ---------------- | ------------ | ------------
None | 0.6186 | 0.04637 | 1,625,252.90 | 124,679.41
500 Expanded | 0.6019 | 0.03628 | 1,666,670.40 | 101,142.65
500 Unexpanded | 0.6435 | 0.03994 | 1,559,979.40 | 104,090.52
1k Expanded | 0.6034 | 0.04349 | 1,665,128.10 | 125,144.57
1k Unexpanded | 0.6261 | 0.03093 | 1,600,457.50 | 79,024.94
5k Expanded | 0.6163 | 0.05926 | 1,636,668.80 | 154,888.85
5k Unexpanded | 0.6402 | 0.04002 | 1,567,804.70 | 100,965.55
10k Expanded | 0.6036 | 0.05105 | 1,667,237.70 | 142,830.36
10k Unexpanded | 0.6128 | 0.02598 | 1,634,633.40 | 72,161.82
25k Expanded | 0.6198 | 0.04542 | 1,620,980.50 | 116,662.93
25k Unexpanded | 0.5478 | 0.0362 | 1,833,059.10 | 121,233.81
50k Expanded | 0.5104 | 0.04347 | 1,973,107.90 | 184,073.49
50k Unexpanded | 0.4528 | 0.03387 | 2,219,034.50 | 170,984.32
```
After a large enough quantity of range tombstones are written, range tombstone Gets can become faster than reading from an equivalent DB with several point tombstones.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4493
Differential Revision: D10842844
Pulled By: abhimadan
fbshipit-source-id: a7d44534f8120e6aabb65779d26c6b9df954c509
Summary:
This fixes three tests that fail with relatively recent tools and libraries:
The tests are:
* `spatial_db_test`
* `table_test`
* `db_universal_compaction_test`
I'm using:
* `gcc` 7.3.0
* `glibc` 2.27
* `snappy` 1.1.7
* `gflags` 2.2.1
* `zlib` 1.2.11
* `bzip2` 1.0.6.0.1
* `lz4` 1.8.2
* `jemalloc` 5.0.1
The versions used in the Travis environment (which is two Ubuntu LTS versions behind the current one and doesn't use `lz4` or `jemalloc`) don't seem to have a problem. However, to be safe, I verified that these tests pass with and without my changes in a trusty Docker container without `lz4` and `jemalloc`.
However, I do get an unrelated set of other failures when using a trusty Docker container that uses `lz4` and `jemalloc`:
```
db/db_universal_compaction_test.cc:506: Failure
Value of: num + 1
Actual: 3
Expected: NumSortedRuns(1)
Which is: 4
[ FAILED ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/0, where GetParam() = (1, false) (1189 ms)
[ RUN ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/1
db/db_universal_compaction_test.cc:506: Failure
Value of: num + 1
Actual: 3
Expected: NumSortedRuns(1)
Which is: 4
[ FAILED ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/1, where GetParam() = (1, true) (1246 ms)
[ RUN ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/2
db/db_universal_compaction_test.cc:506: Failure
Value of: num + 1
Actual: 3
Expected: NumSortedRuns(1)
Which is: 4
[ FAILED ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/2, where GetParam() = (3, false) (1237 ms)
[ RUN ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/3
db/db_universal_compaction_test.cc:506: Failure
Value of: num + 1
Actual: 3
Expected: NumSortedRuns(1)
Which is: 4
[ FAILED ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/3, where GetParam() = (3, true) (1195 ms)
[ RUN ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/4
db/db_universal_compaction_test.cc:506: Failure
Value of: num + 1
Actual: 3
Expected: NumSortedRuns(1)
Which is: 4
[ FAILED ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/4, where GetParam() = (5, false) (1161 ms)
[ RUN ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/5
db/db_universal_compaction_test.cc:506: Failure
Value of: num + 1
Actual: 3
Expected: NumSortedRuns(1)
Which is: 4
[ FAILED ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/5, where GetParam() = (5, true) (1229 ms)
```
I haven't attempted to fix these since I'm not using trusty and Travis doesn't use `lz4` and `jemalloc`. However, the final commit in this PR does at least fix the compilation errors that occur when using trusty's version of `lz4`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4562
Differential Revision: D10510917
Pulled By: maysamyabandeh
fbshipit-source-id: 59534042015ec339270e5fc2f6ac4d859370d189
Summary:
This is a conceptually simple change, but it touches many files to
pass the allocator through function calls.
We introduce CacheAllocator, which can be used by clients to configure
custom allocator for cache blocks. Our motivation is to hook this up
with folly's `JemallocNodumpAllocator`
(f43ce6d686/folly/experimental/JemallocNodumpAllocator.h),
but there are many other possible use cases.
Additionally, this commit cleans up memory allocation in
`util/compression.h`, making sure that all allocations are wrapped in a
unique_ptr as soon as possible.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4437
Differential Revision: D10132814
Pulled By: yiwu-arbug
fbshipit-source-id: be1343a4b69f6048df127939fea9bbc96969f564
Summary:
We want to sample the file I/O issued by RocksDB and report the function calls. This requires us to include the file paths otherwise it's hard to tell what has been going on.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4039
Differential Revision: D8670178
Pulled By: riversand963
fbshipit-source-id: 97ee806d1c583a2983e28e213ee764dc6ac28f7a
Summary:
Add `--data_block_index_type` and `--data_block_hash_table_util_ratio` option to `db_bench`.
`--data_block_index_type` can be either of `binary` (default) or `binary_and_hash`;
`--data_block_hash_table_util_ratio` will be a double. The default value is `0.75`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4281
Differential Revision: D9361476
Pulled By: fgwu
fbshipit-source-id: dc53e01acef9db81b9eec5e8a96f3bc8ed718c10
Summary:
Add hash index support to data blocks, which helps to reduce the CPU utilization of point-lookup operations. This feature is backward compatible with the data block created without the hash index. It is disabled by default unless `BlockBasedTableOptions::data_block_index_type` is set to `data_block_index_type = kDataBlockBinaryAndHash.`
The DB size would be bigger with the hash index option as a hash table is added at the end of each data block. If the hash utilization ratio is 1:1, the space overhead is one byte per key. The hash table utilization ratio is adjustable using `BlockBasedTableOptions::data_block_hash_table_util_ratio`. A lower utilization ratio will improve more on the point-lookup efficiency, but take more space too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4174
Differential Revision: D8965914
Pulled By: fgwu
fbshipit-source-id: 1c6bae5d1fc39c80282d8890a72e9e67bc247198
Summary:
Given that index value is a BlockHandle, which is basically an <offset, size> pair we can apply delta encoding on the values. The first value at each index restart interval encoded the full BlockHandle but the rest encode only the size. Refer to IndexBlockIter::DecodeCurrentValue for the detail of the encoding. This reduces the index size which helps using the block cache more efficiently. The feature is enabled with using format_version 4.
The feature comes with a bit of cpu overhead which should be paid back by the higher cache hits due to smaller index block size.
Results with sysbench read-only using 4k blocks and using 16 index restart interval:
Format 2:
19585 rocksdb read-only range=100
Format 3:
19569 rocksdb read-only range=100
Format 4:
19352 rocksdb read-only range=100
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3983
Differential Revision: D8361343
Pulled By: maysamyabandeh
fbshipit-source-id: f882ee082322acac32b0072e2bdbb0b5f854e651
Summary:
RocksDB used to store global_seqno in external SST files written by
SstFileWriter. During file ingestion, RocksDB uses `pwrite` to update the
`global_seqno`. Since random write is not supported in some non-POSIX compliant
file systems, external SST file ingestion is not supported on these file
systems. To address this limitation, we no longer update `global_seqno` during
file ingestion. Later RocksDB uses the MANIFEST and other information in table
properties to deduce global seqno for externally-ingested SST files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4172
Differential Revision: D8961465
Pulled By: riversand963
fbshipit-source-id: 4382ec85270a96be5bc0cf33758ca2b167b05071
Summary:
Lint is not happy with some new code recently committed. Format them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4161
Differential Revision: D8940582
Pulled By: siying
fbshipit-source-id: c9b43b1ef8c88b5e923911058b44eb77234b36b7
Summary:
Right now we use one hard-coded prefetch size to prefetch data from the tail of the SST files. However, this may introduce a waste for some use cases, while not efficient for others.
Introduce a way to adjust this prefetch size by tracking 32 recent times, and pick a value with which the wasted read is less than 10%
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4156
Differential Revision: D8916847
Pulled By: siying
fbshipit-source-id: 8413f9eb3987e0033ed0bd910f83fc2eeaaf5758
Summary:
The properties meta-block should come at the end since we always need to
read it when opening a file, unlike index/filter/other meta-blocks, which
are sometimes read depending on the user's configuration. This ordering
will allow us to (in a future PR) do a small readahead on the end of the file
to read properties and meta-index blocks with one I/O.
The bulk of this PR is a refactoring of the `BlockBasedTableBuilder::Finish`
function. It was previously too large with inconsistent error handling, which
made it difficult to change. So I broke it up into one function per meta-block
write, and tried to make error handling consistent within those functions.
Then reordering the metablocks was trivial -- just reorder the calls to these
helper functions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4158
Differential Revision: D8921705
Pulled By: ajkr
fbshipit-source-id: 96c9cc3182eb1adf11af46adab79dbeba7b12fcc
Summary:
Some logic only related to IndexBlockIter is separated from BlockIter to IndexBlockIter. This is done by writing an exclusive Seek() and SeekForPrev() for DataBlockIter, and all metadata block iter and tombstone block iter now use data block iter. Dealing with the BinarySeek() sharing problem by passing in the comparator to use.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4136
Reviewed By: maysamyabandeh
Differential Revision: D8859673
Pulled By: siying
fbshipit-source-id: 703e5e6824b82b7cbf4721f3594b94127797ca9e
Summary:
The patch makes sure that two parallel test threads will operate on different db paths. This enables using open source tools such as gtest-parallel to run the tests of a file in parallel.
Example: ``` ~/gtest-parallel/gtest-parallel ./table_test```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4135
Differential Revision: D8846653
Pulled By: maysamyabandeh
fbshipit-source-id: 799bad1abb260e3d346bcb680d2ae207a852ba84
Summary:
- Avoid `strdup` to use jemalloc on Windows
- Use `size_t` for consistency
- Add GCC 8 to Travis
- Add CMAKE_BUILD_TYPE=Release to Travis
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3433
Differential Revision: D6837948
Pulled By: sagar0
fbshipit-source-id: b8543c3a4da9cd07ee9a33f9f4623188e233261f
Summary:
BlockIter is getting crowded including details that specific only to either index or data blocks. The patch moves down such details to DataBlockIter and IndexBlockIter, both inheriting from BlockIter.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4121
Differential Revision: D8816832
Pulled By: maysamyabandeh
fbshipit-source-id: d492e74155c11d8a0c1c85cd7ee33d24c7456197
Maysam Yabandeh