Summary:
If all the keys in range [key_base, shared->GetMaxKey()) are non-overwritable `TestIngestExternalFile()` would attempt to ingest a file with zero keys, leading to the following error: "Cannot create sst file with no entries". This PR changes `TestIngestExternalFile()` to return early in that case instead of going through with the ingestion attempt.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10754
Reviewed By: hx235
Differential Revision: D39909195
Pulled By: ajkr
fbshipit-source-id: e06e6b9cc24826fbd450e5130885e6f07164badd
Summary:
The PR cleans up the logic in `NonBatchedOpsStressTest::VerifyDb` so that
the verification method is picked using a single random number generation.
It also eliminates some repeated key comparisons and makes some small
code hygiene improvements.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10740
Test Plan: Ran a simple blackbox crash test.
Reviewed By: riversand963
Differential Revision: D39828646
Pulled By: ltamasi
fbshipit-source-id: 60ee5a3bb1851278f62c7d83b0c93b902ed9702e
Summary:
One problem of the previous strategy was `NonBatchedOpsStressTest::TestIngestExternalFile()` could release the lock for `rand_keys[0]` in `rand_column_families[0]`, and then subsequent operations in the same loop iteration (e.g., `TestPut()`) would run without locking. This PR changes the strategy so each `Test*()` function is responsible for acquiring and releasing its own locks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10678
Reviewed By: hx235
Differential Revision: D39516401
Pulled By: ajkr
fbshipit-source-id: bf67f12ebbd293ba8c24fdf8754ff28737bcd758
Summary:
When verification fails for db_stress, print more information about
value read from the db and expected state.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10587
Test Plan:
make check
./db_stress
Reviewed By: akankshamahajan15, hx235
Differential Revision: D39078511
Pulled By: riversand963
fbshipit-source-id: 77ac8ffae01fc3a9b58a02c2e7bbe141e1a18f0b
Summary:
https://github.com/facebook/rocksdb/issues/10538 added `TestIterateAgainstExpected()` in `no_batched_ops_test` to verify iterator correctness against the in memory expected state. It is not compatible when run after some other stress tests, e.g. `TestPut()` in `batched_op_stress`, that either do not set expected state when writing to DB or use keys that cannot be parsed by `GetIntVal()`. The assert [here](d17be55aab/db_stress_tool/db_stress_common.h (L520)) could fail. This PR fixed this issue by setting iterator upperbound to `max_key` when `destroy_db_initially=0` to avoid the key space that `batched_op_stress` touches.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10590
Test Plan:
```
# set up DB with batched_op_stress
./db_stress --test_batches_snapshots=1 --verify_iterator_with_expected_state_one_in=1 --max_key_len=3 --max_key=100000000 --skip_verifydb=1 --continuous_verification_interval=0 --writepercent=85 --delpercent=3 --delrangepercent=0 --iterpercent=10 --nooverwritepercent=1 --prefixpercent=0 --readpercent=2 --key_len_percent_dist=1,30,69
# Before this PR, the following test will fail the asserts with error msg like the following
# Assertion failed: (size_key <= key_gen_ctx.weights.size() * sizeof(uint64_t)), function GetIntVal, file db_stress_common.h, line 524.
./db_stress --verify_iterator_with_expected_state_one_in=1 --max_key_len=3 --max_key=100000000 --skip_verifydb=1 --continuous_verification_interval=0 --writepercent=0 --delpercent=3 --delrangepercent=0 --iterpercent=95 --nooverwritepercent=1 --prefixpercent=0 --readpercent=2 --key_len_percent_dist=1,30,69 --destroy_db_initially=0
```
Reviewed By: ajkr
Differential Revision: D39085243
Pulled By: cbi42
fbshipit-source-id: a7dfee2320c330773b623b442d730fd014ec7056
Summary:
As mentioned in https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913,
`db_stress` does not have much verification for iterator correctness.
It has a `TestIterate()` function, but that is mainly for comparing results
between two iterators, one with `total_order_seek` and the other optionally
sets auto_prefix, upper/lower bounds. Commit 49a0581ad2462e31aa3f768afa769e0d33390f33
added a new `TestIterateAgainstExpected()` function that compares iterator against
expected state. It locks a range of keys, creates an iterator, does
a random sequence of `Next/Prev` and compares against expected state.
This PR is based on that commit, the main changes include some logs
(for easier debugging if a test fails), a forward and backward scan to
cover the entire locked key range, and a flag for optionally turning on
this version of Iterator testing.
Added constraint that the checks against expected state in
`TestIterateAgainstExpected()` and in `TestGet()` are only turned on
when `--skip_verifydb` flag is not set.
Remove the change log introduced in https://github.com/facebook/rocksdb/issues/10553.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10538
Test Plan:
Run `db_stress` with `--verify_iterator_with_expected_state_one_in=1`,
and a large `--iterpercent` and `--num_iterations`. Checked `op_logs`
manually to ensure expected coverage. Tweaked part of the code in
https://github.com/facebook/rocksdb/issues/10449 and stress test was able to catch it.
- internally run various flavor of crash test
Reviewed By: ajkr
Differential Revision: D38847269
Pulled By: cbi42
fbshipit-source-id: 8b4402a9bba9f6cfa08051943cd672579d489599
Summary:
updated `TestGet()` in `no_batched_op_stress` to check the result of `Get()` operations against expected state (`expected_state_manager_`). More specifically, if `Get()` finds a key, expected state should not have `DELETION_SENTINEL` for the same key, and if `Get()` returns NotFound for a key, expected state should not have the key. One intention for this change it to verify correctness of code path change regarding range tombstones.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10553
Test Plan: run db_stress with nonzero readpercent: `./db_stress_branch --readpercent=57 --prefixpercent=4 --writepercent=25 -delpercent=5 --iterpercent=5 --delrangepercent=4`. When I initially used wrong column family in `thread->shared->Get`, the test reported inconsistencies.
Reviewed By: ajkr
Differential Revision: D38927007
Pulled By: cbi42
fbshipit-source-id: f9f61b312ad0b4c21a799329609ba8526169b048
Summary:
Before this PR, we call `now()` to get the wall time before performing point-lookup and range
scans when user-defined timestamp is enabled.
With this PR, we expand the coverage to:
- read with an older timestamp which is larger then the wall time when the process starts but potentially smaller than now()
- add coverage for `ReadOptions::iter_start_ts != nullptr`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10280
Test Plan:
```bash
make check
```
Also,
```bash
TEST_TMPDIR=/dev/shm/rocksdb make crash_test_with_ts
```
So far, we have had four successful runs of the above
In addition,
```bash
TEST_TMPDIR=/dev/shm/rocksdb make crash_test
```
Succeeded twice showing no regression.
Reviewed By: ltamasi
Differential Revision: D37539805
Pulled By: riversand963
fbshipit-source-id: f2d9887ad95245945ce17a014d55bb93f00e1cb5
Summary:
**Context/Summary:**
https://github.com/facebook/rocksdb/pull/9424 added rate-limiting support for user reads, which does not include batched `MultiGet()`s that call `RandomAccessFileReader::MultiRead()`. The reason is that it's harder (compared with RandomAccessFileReader::Read()) to implement the ideal rate-limiting where we first call `RateLimiter::RequestToken()` for allowed bytes to multi-read and then consume those bytes by satisfying as many requests in `MultiRead()` as possible. For example, it can be tricky to decide whether we want partially fulfilled requests within one `MultiRead()` or not.
However, due to a recent urgent user request, we decide to pursue an elementary (but a conditionally ineffective) solution where we accumulate enough rate limiter requests toward the total bytes needed by one `MultiRead()` before doing that `MultiRead()`. This is not ideal when the total bytes are huge as we will actually consume a huge bandwidth from rate-limiter causing a burst on disk. This is not what we ultimately want with rate limiter. Therefore a follow-up work is noted through TODO comments.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10159
Test Plan:
- Modified existing unit test `DBRateLimiterOnReadTest/DBRateLimiterOnReadTest.NewMultiGet`
- Traced the underlying system calls `io_uring_enter` and verified they are 10 seconds apart from each other correctly under the setting of `strace -ftt -e trace=io_uring_enter ./db_bench -benchmarks=multireadrandom -db=/dev/shm/testdb2 -readonly -num=50 -threads=1 -multiread_batched=1 -batch_size=100 -duration=10 -rate_limiter_bytes_per_sec=200 -rate_limiter_refill_period_us=1000000 -rate_limit_bg_reads=1 -disable_auto_compactions=1 -rate_limit_user_ops=1` where each `MultiRead()` read about 2000 bytes (inspected by debugger) and the rate limiter grants 200 bytes per seconds.
- Stress test:
- Verified `./db_stress (-test_cf_consistency=1/test_batches_snapshots=1) -use_multiget=1 -cache_size=1048576 -rate_limiter_bytes_per_sec=10241024 -rate_limit_bg_reads=1 -rate_limit_user_ops=1` work
Reviewed By: ajkr, anand1976
Differential Revision: D37135172
Pulled By: hx235
fbshipit-source-id: 73b8e8f14761e5d4b77235dfe5d41f4eea968bcd
Summary:
In RocksDB, keys are associated with (internal) sequence numbers which denote when the keys are written
to the database. Sequence numbers in different RocksDB instances are unrelated, thus not comparable.
It is nice if we can associate sequence numbers with their corresponding actual timestamps. One thing we can
do is to support user-defined timestamp, which allows the applications to specify the format of custom timestamps
and encode a timestamp with each key. More details can be found at https://github.com/facebook/rocksdb/wiki/User-defined-Timestamp-%28Experimental%29.
This PR provides a different but complementary approach. We can associate rocksdb snapshots (defined in
https://github.com/facebook/rocksdb/blob/7.2.fb/include/rocksdb/snapshot.h#L20) with **user-specified** timestamps.
Since a snapshot is essentially an object representing a sequence number, this PR establishes a bi-directional mapping between sequence numbers and timestamps.
In the past, snapshots are usually taken by readers. The current super-version is grabbed, and a `rocksdb::Snapshot`
object is created with the last published sequence number of the super-version. You can see that the reader actually
has no good idea of what timestamp to assign to this snapshot, because by the time the `GetSnapshot()` is called,
an arbitrarily long period of time may have already elapsed since the last write, which is when the last published
sequence number is written.
This observation motivates the creation of "timestamped" snapshots on the write path. Currently, this functionality is
exposed only to the layer of `TransactionDB`. Application can tell RocksDB to create a snapshot when a transaction
commits, effectively associating the last sequence number with a timestamp. It is also assumed that application will
ensure any two snapshots with timestamps should satisfy the following:
```
snapshot1.seq < snapshot2.seq iff. snapshot1.ts < snapshot2.ts
```
If the application can guarantee that when a reader takes a timestamped snapshot, there is no active writes going on
in the database, then we also allow the user to use a new API `TransactionDB::CreateTimestampedSnapshot()` to create
a snapshot with associated timestamp.
Code example
```cpp
// Create a timestamped snapshot when committing transaction.
txn->SetCommitTimestamp(100);
txn->SetSnapshotOnNextOperation();
txn->Commit();
// A wrapper API for convenience
Status Transaction::CommitAndTryCreateSnapshot(
std::shared_ptr<TransactionNotifier> notifier,
TxnTimestamp ts,
std::shared_ptr<const Snapshot>* ret);
// Create a timestamped snapshot if caller guarantees no concurrent writes
std::pair<Status, std::shared_ptr<const Snapshot>> snapshot = txn_db->CreateTimestampedSnapshot(100);
```
The snapshots created in this way will be managed by RocksDB with ref-counting and potentially shared with
other readers. We provide the following APIs for readers to retrieve a snapshot given a timestamp.
```cpp
// Return the timestamped snapshot correponding to given timestamp. If ts is
// kMaxTxnTimestamp, then we return the latest timestamped snapshot if present.
// Othersise, we return the snapshot whose timestamp is equal to `ts`. If no
// such snapshot exists, then we return null.
std::shared_ptr<const Snapshot> TransactionDB::GetTimestampedSnapshot(TxnTimestamp ts) const;
// Return the latest timestamped snapshot if present.
std::shared_ptr<const Snapshot> TransactionDB::GetLatestTimestampedSnapshot() const;
```
We also provide two additional APIs for stats collection and reporting purposes.
```cpp
Status TransactionDB::GetAllTimestampedSnapshots(
std::vector<std::shared_ptr<const Snapshot>>& snapshots) const;
// Return timestamped snapshots whose timestamps fall in [ts_lb, ts_ub) and store them in `snapshots`.
Status TransactionDB::GetTimestampedSnapshots(
TxnTimestamp ts_lb,
TxnTimestamp ts_ub,
std::vector<std::shared_ptr<const Snapshot>>& snapshots) const;
```
To prevent the number of timestamped snapshots from growing infinitely, we provide the following API to release
timestamped snapshots whose timestamps are older than or equal to a given threshold.
```cpp
void TransactionDB::ReleaseTimestampedSnapshotsOlderThan(TxnTimestamp ts);
```
Before shutdown, RocksDB will release all timestamped snapshots.
Comparison with user-defined timestamp and how they can be combined:
User-defined timestamp persists every key with a timestamp, while timestamped snapshots maintain a volatile
mapping between snapshots (sequence numbers) and timestamps.
Different internal keys with the same user key but different timestamps will be treated as different by compaction,
thus a newer version will not hide older versions (with smaller timestamps) unless they are eligible for garbage collection.
In contrast, taking a timestamped snapshot at a certain sequence number and timestamp prevents all the keys visible in
this snapshot from been dropped by compaction. Here, visible means (seq < snapshot and most recent).
The timestamped snapshot supports the semantics of reading at an exact point in time.
Timestamped snapshots can also be used with user-defined timestamp.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9879
Test Plan:
```
make check
TEST_TMPDIR=/dev/shm make crash_test_with_txn
```
Reviewed By: siying
Differential Revision: D35783919
Pulled By: riversand963
fbshipit-source-id: 586ad905e169189e19d3bfc0cb0177a7239d1bd4
Summary:
This PR updates secondary instance testing in stress test by default.
A background thread will be started (disabled by default), running a secondary instance tailing the logs of the primary.
Periodically (every 1 sec), this thread calls `TryCatchUpWithPrimary()` and uses point lookup or range scan
to read some random keys with only very basic verification to make sure no assertion failure is triggered.
Thanks to https://github.com/facebook/rocksdb/issues/10061 , we can enable secondary instance when user-defined timestamp is enabled.
Also removed a less useful test configuration, `secondary_catch_up_one_in`. This is very similar to the periodic
catch-up.
In the last commit, I decided not to enable it now, but just update the tests, since secondary instance does not
work well when the underlying file is renamed by primary, e.g. SstFileManager.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10121
Test Plan:
```
TEST_TMPDIR=/dev/shm/rocksdb make crash_test
TEST_TMPDIR=/dev/shm/rocksdb make crash_test_with_ts
TEST_TMPDIR=/dev/shm/rocksdb make crash_test_with_atomic_flush
```
Reviewed By: ajkr
Differential Revision: D36939458
Pulled By: riversand963
fbshipit-source-id: 1c065b7efc3690fc341569b9d369a5cbd8ef6b3e
Summary:
Thanks to https://github.com/facebook/rocksdb/issues/9919 and https://github.com/facebook/rocksdb/issues/10051 the known bugs in file ingestion (besides mmap read + file checksum) are fixed. Now we can try again to enable file ingestion in crash test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9357
Test Plan: stress file ingestion heavily for an hour: `$ TEST_TMPDIR=/dev/shm python3 tools/db_crashtest.py blackbox --max_key=1000000 --ingest_external_file_one_in=100 --duration=3600 --interval=20 --write_buffer_size=524288 --target_file_size_base=524288 --max_bytes_for_level_base=2097152`
Reviewed By: riversand963
Differential Revision: D33410746
Pulled By: ajkr
fbshipit-source-id: d276431390995a67f68390d61c06a40945fdd280
Summary:
ToString() is created as some platform doesn't support std::to_string(). However, we've already used std::to_string() by mistake for 16 months (in db/db_info_dumper.cc). This commit just remove ToString().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9955
Test Plan: Watch CI tests
Reviewed By: riversand963
Differential Revision: D36176799
fbshipit-source-id: bdb6dcd0e3a3ab96a1ac810f5d0188f684064471
Summary:
Previously all fault injection was ignored in release mode. This PR adds it back except for read fault injection (`--read_fault_one_in > 0`) since its dependency (`IGNORE_STATUS_IF_ERROR`) is unavailable in release mode.
Other notable changes include:
- Moved `EnableWriteErrorInjection()` for `--write_fault_one_in > 0` so it's after `DB::Open()` without depending on `SyncPoint`
- Made `--read_fault_one_in > 0` return an error in release mode
- Updated `db_crashtest.py` to always set `--read_fault_one_in=0` in release mode
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9957
Test Plan:
```
$ DEBUG_LEVEL=0 make -j24 db_stress
$ DEBUG_LEVEL=0 TEST_TMPDIR=/dev/shm python3 tools/db_crashtest.py blackbox
```
Reviewed By: anand1976
Differential Revision: D36193830
Pulled By: ajkr
fbshipit-source-id: 0b97946b4e3f06e3e0f6e7833c2763da08ec5321
Summary:
When compaction filter determines that a key should be removed, it updates the internal key's type
to `Delete`. If this internal key is preserved in current compaction but seen by a later compaction
together with `SingleDelete`, it will cause compaction iterator to return Corruption.
To fix the issue, compaction filter should return more information in addition to the intention of removing
a key. Therefore, we add a new `kRemoveWithSingleDelete` to `CompactionFilter::Decision`. Seeing
`kRemoveWithSingleDelete`, compaction iterator will update the op type of the internal key to `kTypeSingleDelete`.
In addition, I updated db_stress_shared_state.[cc|h] so that `no_overwrite_ids_` becomes `const`. It is easier to
reason about thread-safety if accessed from multiple threads. This information is passed to `PrepareTxnDBOptions()`
when calling from `Open()` so that we can set up the rollback deletion type callback for transactions.
Finally, disable compaction filter for multiops_txn because the key removal logic of `DbStressCompactionFilter` does
not quite work with `MultiOpsTxnsStressTest`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9929
Test Plan:
make check
make crash_test
make crash_test_with_txn
Reviewed By: anand1976
Differential Revision: D36069678
Pulled By: riversand963
fbshipit-source-id: cedd2f1ba958af59ad3916f1ba6f424307955f92
Summary:
Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working.
`RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`.
There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads).
The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424
Test Plan:
- new unit tests
- new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart.
- setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true`
- benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true`
- crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10`
Reviewed By: hx235
Differential Revision: D33747386
Pulled By: ajkr
fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c
Summary:
ajkr reminded me that we have a rule of not including per-kv related data in `WriteOptions`.
Namely, `WriteOptions` should not include information about "what-to-write", but should just
include information about "how-to-write".
According to this rule, `WriteOptions::timestamp` (experimental) is clearly a violation. Therefore,
this PR removes `WriteOptions::timestamp` for compliance.
After the removal, we need to pass timestamp info via another set of APIs. This PR proposes a set
of overloaded functions `Put(write_opts, key, value, ts)`, `Delete(write_opts, key, ts)`, and
`SingleDelete(write_opts, key, ts)`. Planned to add `Write(write_opts, batch, ts)`, but its complexity
made me reconsider doing it in another PR (maybe).
For better checking and returning error early, we also add a new set of APIs to `WriteBatch` that take
extra `timestamp` information when writing to `WriteBatch`es.
These set of APIs in `WriteBatchWithIndex` are currently not supported, and are on our TODO list.
Removed `WriteBatch::AssignTimestamps()` and renamed `WriteBatch::AssignTimestamp()` to
`WriteBatch::UpdateTimestamps()` since this method require that all keys have space for timestamps
allocated already and multiple timestamps can be updated.
The constructor of `WriteBatch` now takes a fourth argument `default_cf_ts_sz` which is the timestamp
size of the default column family. This will be used to allocate space when calling APIs that do not
specify a column family handle.
Also, updated `DB::Get()`, `DB::MultiGet()`, `DB::NewIterator()`, `DB::NewIterators()` methods, replacing
some assertions about timestamp to returning Status code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8946
Test Plan:
make check
./db_bench -benchmarks=fillseq,fillrandom,readrandom,readseq,deleterandom -user_timestamp_size=8
./db_stress --user_timestamp_size=8 -nooverwritepercent=0 -test_secondary=0 -secondary_catch_up_one_in=0 -continuous_verification_interval=0
Make sure there is no perf regression by running the following
```
./db_bench_opt -db=/dev/shm/rocksdb -use_existing_db=0 -level0_stop_writes_trigger=256 -level0_slowdown_writes_trigger=256 -level0_file_num_compaction_trigger=256 -disable_wal=1 -duration=10 -benchmarks=fillrandom
```
Before this PR
```
DB path: [/dev/shm/rocksdb]
fillrandom : 1.831 micros/op 546235 ops/sec; 60.4 MB/s
```
After this PR
```
DB path: [/dev/shm/rocksdb]
fillrandom : 1.820 micros/op 549404 ops/sec; 60.8 MB/s
```
Reviewed By: ltamasi
Differential Revision: D33721359
Pulled By: riversand963
fbshipit-source-id: c131561534272c120ffb80711d42748d21badf09
Summary:
When `--sync_fault_injection` is set, this PR takes a snapshot of the expected values and starts an operation trace when the DB is opened. These files are stored in `--expected_values_dir`. They will be used for recovering the expected state of the DB following a crash where a suffix of unsynced operations are allowed to be lost.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8960
Test Plan: injected crashed at various points in `FileExpectedStateManager` and verified the next run recovers the state/trace file with highest seqno and removes all older/temporary files. Note we don't use sync_fault_injection in CI crash tests yet.
Reviewed By: pdillinger
Differential Revision: D31194941
Pulled By: ajkr
fbshipit-source-id: b0f935a529a0186c5a9c7709fcaa8829de8a84cf
Summary:
Several improvements to MultiRead:
1. Fix a bug in stress test which causes false positive when both MultiRead() return and individual read request have failure injected.
2. Add two more types of fault that should be handled: empty read results and checksum mismatch
3. Add a message indicating which type of fault is injected
4. Increase the failure rate
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8937
Reviewed By: anand1976
Differential Revision: D31085930
fbshipit-source-id: 3a04994a3cadebf9a64d25e1fe12b14b7a272fba
Summary:
add the injest_error_severity to control if it is a retryable IO Error or a fatal or unrecoverable error. Use a flag to indicate, if fatal error comes, the flag is set and db is stopped (but not corrupted).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8479
Test Plan: run ./db_stress --reopen=0 --read_fault_one_in=1000 --write_fault_one_in=5 --disable_wal=true --write_buffer_size=3000000 -writepercent=5 -readpercent=50 --injest_error_severity=2 --column_families=1, make check
Reviewed By: anand1976
Differential Revision: D29524271
Pulled By: zhichao-cao
fbshipit-source-id: 1aa9fb9b5655b0adba6f5ad12005ca8c074c795b
Summary:
Add some basic test for user-defined timestamp to db_stress. Currently,
read with timestamp always tries to read using the current timestamp.
Due to the per-key timestamp-sequence ordering constraint, we only add timestamp-
related tests to the `NonBatchedOpsStressTest` since this test serializes accesses
to the same key and uses a file to cross-check data correctness.
The timestamp feature is not supported in a number of components, e.g. Merge, SingleDelete,
DeleteRange, CompactionFilter, Readonly instance, secondary instance, SST file ingestion, transaction,
etc. Therefore, db_stress should exit if user enables both timestamp and these features at the same
time. The (currently) incompatible features can be found in
`CheckAndSetOptionsForUserTimestamp`.
This PR also fixes a bug triggered when timestamp is enabled together with
`index_type=kBinarySearchWithFirstKey`. This bug fix will also be in another separate PR
with more unit tests coverage. Fixing it here because I do not want to exclude the index type
from crash test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8061
Test Plan: make crash_test_with_ts
Reviewed By: jay-zhuang
Differential Revision: D27056282
Pulled By: riversand963
fbshipit-source-id: c3e00ad1023fdb9ebbdf9601ec18270c5e2925a9
Summary:
Cleans up some of the dependencies on test code in the Makefile while building tools:
- Moves the test::RandomString, DBBaseTest::RandomString into Random
- Moves the test::RandomHumanReadableString into Random
- Moves the DestroyDir method into file_utils
- Moves the SetupSyncPointsToMockDirectIO into sync_point.
- Moves the FaultInjection Env and FS classes under env
These changes allow all of the tools to build without dependencies on test_util, thereby simplifying the build dependencies. By moving the FaultInjection code, the dependency in db_stress on different libraries for debug vs release was eliminated.
Tested both release and debug builds via Make and CMake for both static and shared libraries.
More work remains to clean up how the tools are built and remove some unnecessary dependencies. There is also more work that should be done to get the Makefile and CMake to align in their builds -- what is in the libraries and the sizes of the executables are different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7097
Reviewed By: riversand963
Differential Revision: D22463160
Pulled By: pdillinger
fbshipit-source-id: e19462b53324ab3f0b7c72459dbc73165cc382b2
Summary:
In NoBatchedOpsStress::TestMultiGet, call txn->Get() when transactions
are in use.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6860
Test Plan: make crash_test_with_txn
Reviewed By: pdillinger
Differential Revision: D21667249
Pulled By: anand1976
fbshipit-source-id: 194bd7b9630a8efc3ae29d85422a61214e9e200e
Summary:
Add MultiGet to VerifyDb and check consistency with Get in TestMultiGet.
Test plan -
make crash_test
ASAN crash test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6849
Reviewed By: pdillinger
Differential Revision: D21635011
Pulled By: anand1976
fbshipit-source-id: deb5a79d08fefd8d8010204f1f20b83adc92310e
Summary:
1. Fix a memory leak in FaultInjectionTestFS in the stack trace related
code
2. Check status of all MultiGet keys before deciding whether an error
was swallowed, instead of assuming an ok status for any key means an
undetected error
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6700
Test Plan: Run db_stress with asan and fault injection
Reviewed By: cheng-chang
Differential Revision: D21021498
Pulled By: anand1976
fbshipit-source-id: 489191efd1ab0fa834923a1e1d57253a7a315465
Summary:
This PR implements a fault injection mechanism for injecting errors in reads in db_stress. The FaultInjectionTestFS is used for this purpose. A thread local structure is used to track the errors, so that each db_stress thread can independently enable/disable error injection and verify observed errors against expected errors. This is initially enabled only for Get and MultiGet, but can be extended to iterator as well once its proven stable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6538
Test Plan:
crash_test
make check
Reviewed By: riversand963
Differential Revision: D20714347
Pulled By: anand1976
fbshipit-source-id: d7598321d4a2d72bda0ced57411a337a91d87dc7
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
When called on transactions, MultiGet could return a legit MergeInProgress status. The patch excludes this case from errors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6257
Differential Revision: D19275787
Pulled By: maysamyabandeh
fbshipit-source-id: f7158229422af015947e592ae066b4273c9fb9a4
Summary:
Stress tests count number of errors and report them at the end. Not all the cases are accompanied with a log line which makes debugging difficult. The patch adds a log line to the remaining cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6256
Differential Revision: D19268785
Pulled By: maysamyabandeh
fbshipit-source-id: bdabcaa5c5c7edcb4ce4f25e38fd8a3fd9c7700b
Summary:
Clang analyzer was falsely reporting on use of txn=nullptr.
Added a new const variable so that it can properly prune impossible
control flows.
Also, 'make analyze' previously required setting USE_CLANG=1 as an
environment variable, not a make variable, or else compilation errors
like
g++: error: unrecognized command line option ‘-Wshorten-64-to-32’
Now USE_CLANG is not required for 'make analyze' (it's implied) and you
can do an incremental analysis (recompile what has changed) with
'USE_CLANG=1 make analyze_incremental'
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6244
Test Plan: 'make -j24 analyze', 'make crash_test'
Differential Revision: D19225950
Pulled By: pdillinger
fbshipit-source-id: 14f4039aa552228826a2de62b2671450e0fed3cb
Summary:
This commit is suspected in some crash test failures such as
Verification failed for column family 0 key 78438077: Value not found: NotFound:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6243
Test Plan: 'make check' and start 'make crash_test'
Differential Revision: D19220495
Pulled By: pdillinger
fbshipit-source-id: 6c4709cee80ab4344e06ce360f51e947d79fb3fa
Summary:
Call Transaction::MultiGet from TestMultiGet() in db_stress. We add some Puts/Merges/Deletes into the transaction in order to exercise MultiGetFromBatchAndDB. There is no data verification on read, just check status. There is currently no read data verification in db_stress as it requires synchronization with writes. It needs to be tackled separately.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6227
Test Plan: make crash_test_with_txn
Differential Revision: D19204611
Pulled By: anand1976
fbshipit-source-id: 770d0e30d002e88626c264c58103f1d709bb060c
Summary:
Currently, db_stress generates fixed length keys of 8 bytes. This patch adds the ability to generate variable length keys. Most of the db_stress code continues to work with a numeric key randomly generated, and the numeric key also acts as an index into the values_ array. The numeric key is mapped to a variable length string key in a deterministic way. Furthermore, the ordering is preserved.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6165
Test Plan: run make crash_test
Differential Revision: D19204646
Pulled By: anand1976
fbshipit-source-id: d2d46a96615b4832a8be2a981f5913905f0e1ca7
Summary:
Several improvements to crash_test/stress_test:
(1) Stress_test to support an parameter of bottommost compression
(2) Rename those FLAGS_* variables that are not gflags to avoid confusion
(3) Crash_test to randomly generate compression type for bottommost compression with half the chance.
(4) Stress_test to sanitize unsupported compression type to snappy, so that crash_test to cover all possible compression types and people don't need to worry about they don't support all comrpession types in their environment.
(5) In crash_test, when generating db_stress command, sort arguments in alphabeta order, so that it is easier to find value for a specific argument.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6215
Test Plan: Run "make crash_test" for a while and see the botommost option shown in LOG files.
Differential Revision: D19171255
fbshipit-source-id: d7001e246c4ff9ee5760776eea0be97738650735
Summary:
Currently, db_stress performs verification by calling `VerifyDb()` at the end of test and optionally before tests start. In case of corruption or incorrect result, it will be too late. This PR adds more verification in two ways.
1. For cf consistency test, each test thread takes a snapshot and verifies every N ops. N is configurable via `-verify_db_one_in`. This option is not supported in other stress tests.
2. For cf consistency test, we use another background thread in which a secondary instance periodically tails the primary (interval is configurable). We verify the secondary. Once an error is detected, we terminate the test and report. This does not affect other stress tests.
Test plan (devserver)
```
$./db_stress -test_cf_consistency -verify_db_one_in=0 -ops_per_thread=100000 -continuous_verification_interval=100
$./db_stress -test_cf_consistency -verify_db_one_in=1000 -ops_per_thread=10000 -continuous_verification_interval=0
$make crash_test
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6173
Differential Revision: D19047367
Pulled By: riversand963
fbshipit-source-id: aeed584ad71f9310c111445f34975e5ab47a0615
Summary:
And clean up related code, especially in stress test.
(More clean up of db_stress_test_base.cc coming after this.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6154
Test Plan: make check, make blackbox_crash_test for a bit
Differential Revision: D18938180
Pulled By: pdillinger
fbshipit-source-id: 524d27621b8dbb25f6dff40f1081e7c00630357e
Summary:
Two changes:
1. Prevent static variables in a header file
2. Add "override" keyword when virtual functions are overridden.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6137
Test Plan: Build db_stress with or without LITE.
Differential Revision: D18892007
fbshipit-source-id: 295356427a34473b23ed36d6ed4ef3ae35a32db0
Summary:
db_stress_tool.cc now is a giant file. In order to main it easier to improve and maintain, break it down to multiple source files.
Most classes are turned into their own files. Separate .h and .cc files are created for gflag definiations. Another .h and .cc files are created for some common functions. Some test execution logic that is only loosely related to class StressTest is moved to db_stress_driver.h and db_stress_driver.cc. All the files are located under db_stress_tool/. The directory name is created as such because if we end it with either stress or test, .gitignore will ignore any file under it and makes it prone to issues in developements.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6134
Test Plan: Build under GCC7 with and without LITE on using GNU Make. Build with GCC 4.8. Build with cmake with -DWITH_TOOL=1
Differential Revision: D18876064
fbshipit-source-id: b25d0a7451840f31ac0f5ebb0068785f783fdf7d
Andrew Kryczka