Summary:
Resolves https://github.com/facebook/rocksdb/issues/9761
With this PR, applications can create an iterator with the following
```cpp
ReadOptions read_opts;
read_opts.timestamp = &ts_ub;
read_opts.iter_start_ts = &ts_lb;
auto* it = db->NewIterator(read_opts);
it->SeekToLast();
// or it->SeekForPrev("foo");
it->Prev();
...
```
The application can access different versions of the same user key via `key()`, `value()`, and `timestamp()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10200
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D37258074
Pulled By: riversand963
fbshipit-source-id: 3f0b866ade50dcff7ef60d506397a9dd6ec91565
Summary:
Most of the properties listed as required for prefix extractors
are not really required but offer some conveniences. This updates API
comments to clarify actual requirements, and adds tests to demonstrate
how previously presumed requirements can be safely violated.
This might seem like a useless exercise, but this relaxing of requirements
would be needed if we generalize prefixes to group keys not just at the
byte level but also based on bits or arbitrary value ranges. For
applications without a "natural" prefix size, having only byte-level
granularity often means one prefix size to the next differs in magnitude
by a factor of 256.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10245
Test Plan: Tests added, also covering missing Iterator cases from https://github.com/facebook/rocksdb/issues/10244
Reviewed By: bjlemaire
Differential Revision: D37371559
Pulled By: pdillinger
fbshipit-source-id: ab2dd719992eea7656e9042cf8542393e02fa244
Summary:
The `bytes_read` returned by the current BlobSource interface is ambiguous. The uncompressed blob size is returned if the cache hits. The size of the blob read from disk, presumably the compressed version, is returned if the cache misses. Two differing semantics might cause ambiguity and consistency issues. For example, this inconsistency causes the assertion failure (T124246362 and its hot fix is https://github.com/facebook/rocksdb/issues/10249).
This goal is to require that the value of `byte read` always be an on-disk blob record size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10248
Reviewed By: ltamasi
Differential Revision: D37470292
Pulled By: gangliao
fbshipit-source-id: fbca521b2791d3674dbf2484cea5fcae2fdd94d2
Summary:
The patch fixes a couple of issues related to in-place updates: 1) the value type was not passed from
`MemTableInserter::PutCFImpl` to `MemTable::Update` and 2) `MemTable::UpdateCallback` was called
for any value type (with the callee's logic assuming `kTypeValue`) even though the callback mechanism
is only safe for plain values.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10254
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D37463644
Pulled By: ltamasi
fbshipit-source-id: 33802477dac0691681f416ae84c4d9742c6fe41a
Summary:
The patch builds on https://github.com/facebook/rocksdb/pull/9915 and adds
a new API called `PutEntity` that can be used to write a wide-column entity
to the database. The new API is added to both `DB` and `WriteBatch`. Note
that currently there is no way to retrieve these entities; more precisely, all
read APIs (`Get`, `MultiGet`, and iterator) return `NotSupported` when they
encounter a wide-column entity that is required to answer a query. Read-side
support (as well as other missing functionality like `Merge`, compaction filter,
and timestamp support) will be added in later PRs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10242
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D37369748
Pulled By: ltamasi
fbshipit-source-id: 7f5e412359ed7a400fd80b897dae5599dbcd685d
Summary:
The 'PersistRoundRobinCompactCursor' unit test in `db_compaction_test` may occasionally fail due to the inconsistent LSM state. The issue is fixed by adding `Flush()` and `WaitForFlushMemTable()` to produce a more predictable and stable LSM state.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10250
Test Plan: 'PersistRoundRobinCompactCursor' unit test in `db_compaction_test`
Reviewed By: jay-zhuang, riversand963
Differential Revision: D37426091
Pulled By: littlepig2013
fbshipit-source-id: 56fbaab0384c380c1f279a16dc8732b139c9f611
Summary:
Currently SortFileByOverlappingRatio() is O(nlogn). It is usually OK but When there are a lot of files in an LSM-tree, SortFileByOverlappingRatio() can take non-trivial amount of time. The problem is severe when the user is loading keys in sorted order, where compaction is only trivial move and this operation becomes the bottleneck and limit the total throughput. This commit makes SortFileByOverlappingRatio() only find the top 50 files based on score. 50 files are usually enough for the parallel compactions needed for the level, and in case it is not enough, we would fall back to random, which should be acceptable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10161
Test Plan:
Run a fillseq that generates a lot of files, and observe throughput improved (although stall is not yet eliminated). The command ran:
TEST_TMPDIR=/dev/shm/ ./db_bench_sort --benchmarks=fillseq --compression_type=lz4 --write_buffer_size=5000000 --num=100000000 --value_size=1000
The throughput improved by 11%.
Reviewed By: jay-zhuang
Differential Revision: D37129469
fbshipit-source-id: 492da2ef5bfc7cdd6daa3986b50d2ff91f88542d
Summary:
This task is to fix assertion failures during the crash test runs. The cache entry size might not match value size because value size can include the on-disk (possibly compressed) size. Therefore, we removed the assertions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10249
Reviewed By: ltamasi
Differential Revision: D37407576
Pulled By: gangliao
fbshipit-source-id: 577559f267c5b2437bcd0631cd0efabb6dde3b69
Summary:
Resolves https://github.com/facebook/rocksdb/issues/10129
I extracted this fix from https://github.com/facebook/rocksdb/issues/7516 since it's also already a bug in main branch, and we want to
separate it from the main part of the PR.
There can be a race condition between two threads. Thread 1 executes
`DBImpl::FindObsoleteFiles()` while thread 2 executes `GetSortedWals()`.
```
Time thread 1 thread 2
| mutex_.lock
| read disable_delete_obsolete_files_
| ...
| wait on log_sync_cv and release mutex_
| mutex_.lock
| ++disable_delete_obsolete_files_
| mutex_.unlock
| mutex_.lock
| while (pending_purge_obsolete_files > 0) { bg_cv.wait;}
| wake up with mutex_ locked
| compute WALs tracked by MANIFEST
| mutex_.unlock
| wake up with mutex_ locked
| ++pending_purge_obsolete_files_
| mutex_.unlock
|
| delete obsolete WAL
| WAL missing but tracked in MANIFEST.
V
```
The fix proposed eliminates the possibility of the above by increasing
`pending_purge_obsolete_files_` before `FindObsoleteFiles()` can possibly release the mutex.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10187
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D37214235
Pulled By: riversand963
fbshipit-source-id: 556ab1b58ae6d19150169dfac4db08195c797184
Summary:
Add suggest_compact_range() and suggest_compact_range_cf() to C API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10175
Test Plan:
As verifying the result requires SyncPoint, which is not available in the c_test.c,
the test is currently done by invoking the functions and making sure it does not crash.
Reviewed By: jay-zhuang
Differential Revision: D37305191
Pulled By: ajkr
fbshipit-source-id: 0fe257b45914f6c9aeb985d8b1820dafc57a20db
Summary:
The files behind the compaction cursor contain newer data than the files ahead of it. If a compaction writes a file that spans from before its output level’s cursor to after it, then data before the cursor will be contaminated with the old timestamp from the data after the cursor. To avoid this, we can split the output file into two – one entirely before the cursor and one entirely after the cursor. Note that, in rare cases, we **DO NOT** need to cut the file if it is a trivial move since the file will not be contaminated by older files. In such case, the compact cursor is not guaranteed to be the boundary of the file, but it does not hurt the round-robin selection process.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10227
Test Plan:
Add 'RoundRobinCutOutputAtCompactCursor' unit test in `db_compaction_test`
Task: [T122216351](https://www.internalfb.com/intern/tasks/?t=122216351)
Reviewed By: jay-zhuang
Differential Revision: D37388088
Pulled By: littlepig2013
fbshipit-source-id: 9246a6a084b6037b90d6ab3183ba4dfb75a3378d
Summary:
There is currently no caching mechanism for blobs, which is not ideal especially when the database resides on remote storage (where we cannot rely on the OS page cache). As part of this task, we would like to make it possible for the application to configure a blob cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10225
Test Plan:
Add test cases for MultiGetBlob
In this task, we added the new API MultiGetBlob() for BlobSource.
This PR is a part of https://github.com/facebook/rocksdb/issues/10156
Reviewed By: ltamasi
Differential Revision: D37358364
Pulled By: gangliao
fbshipit-source-id: aff053a37615d96d768fb9aedde17da5618c7ae6
Summary:
When a key is "out of domain" for the prefix_extractor (no
prefix assigned) then the Bloom filter is not queried. PerfContext
was counting this as a Bloom "hit" while Statistics doesn't count this
as a prefix Bloom checked. I think it's more accurate to call it neither
hit nor miss, so changing the counting to make it PerfContext coounting
more like Statistics.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10244
Test Plan:
tests updates and expanded (Get and MultiGet). Iterator test
coverage of the change will come in next PR
Reviewed By: bjlemaire
Differential Revision: D37371297
Pulled By: pdillinger
fbshipit-source-id: fed132fba6a92b2314ab898d449fce2d1586c157
Summary:
**Summary**
Make the mempurge option flag a Mutable Column Family option flag. Therefore, the mempurge feature can be dynamically toggled.
**Motivation**
RocksDB users prefer having the ability to switch features on and off without having to close and reopen the DB. This is particularly important if the feature causes issues and needs to be turned off. Dynamically changing a DB option flag does not seem currently possible.
Moreover, with this new change, the MemPurge feature can be toggled on or off independently between column families, which we see as a major improvement.
**Content of this PR**
This PR includes removal of the `experimental_mempurge_threshold` flag as a DB option flag, and its re-introduction as a `MutableCFOption` flag. I updated the code to handle dynamic changes of the flag (in particular inside the `FlushJob` file). Additionally, this PR includes a new test to demonstrate the capacity of the code to toggle the MemPurge feature on and off, as well as the addition in the `db_stress` module of 2 different mempurge threshold values (0.0 and 1.0) that can be randomly changed with the `set_option_one_in` flag. This is useful to stress test the dynamic changes.
**Benchmarking**
I will add numbers to prove that there is no performance impact within the next 12 hours.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10011
Reviewed By: pdillinger
Differential Revision: D36462357
Pulled By: bjlemaire
fbshipit-source-id: 5e3d63bdadf085c0572ecc2349e7dd9729ce1802
Summary:
* Add metadata related structs and functions in C API, including
- `rocksdb_get_column_family_metadata()` and `rocksdb_get_column_family_metadata_cf()`
that returns `rocksdb_column_family_metadata_t`.
- `rocksdb_column_family_metadata_t` and its get functions & destroy function.
- `rocksdb_level_metadata_t` and its and its get functions & destroy function.
- `rocksdb_file_metadata_t` and its and get functions & destroy functions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10207
Test Plan:
Extend the existing c_test.c to include additional checks for column_family_metadata
inside CheckCompaction.
Reviewed By: riversand963
Differential Revision: D37305209
Pulled By: ajkr
fbshipit-source-id: 0a5183206353acde145f5f9b632c3bace670aa6e
Summary:
https://github.com/facebook/rocksdb/issues/9984 changes the behavior of RocksDB: if logger creation failed during `SanitizeOptions()`,
`DB::Open()` will fail. However, since `SanitizeOptions()` is called in `DBImpl::DBImpl()`, we cannot
directly expose the error to caller without some additional work.
This is a first version proposal which:
- Adds a new member `init_logger_creation_s` to `DBImpl` to store the result of init logger creation
- Checks the error during `DB::Open()` and return it to caller if non-ok
This is not very ideal. We can alternatively move the logger creation logic out of the `SanitizeOptions()`.
Since `SanitizeOptions()` is used in other places, we need to check whether this change breaks anything
in case other callers of `SanitizeOptions()` assumes that a logger should be created.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10223
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D37321717
Pulled By: riversand963
fbshipit-source-id: 58042358a86369d606549dd9938933dd47591c4b
Summary:
So that DBImpl::RecoverLogFiles do not have to deal with implementation
details of WalFilter.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10214
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D37299122
Pulled By: riversand963
fbshipit-source-id: acf1a80f1ef75da393d375f55968b2f3ac189816
Summary:
Add `kRoundRobin` as a compaction priority. The implementation is as follows.
- Define a cursor as the smallest Internal key in the successor of the selected file. Add `vector<InternalKey> compact_cursor_` into `VersionStorageInfo` where each element (`InternalKey`) in `compact_cursor_` represents a cursor. In round-robin compaction policy, we just need to select the first file (assuming files are sorted) and also has the smallest InternalKey larger than/equal to the cursor. After a file is chosen, we create a new `Fsize` vector which puts the selected file is placed at the first position in `temp`, the next cursor is then updated as the smallest InternalKey in successor of the selected file (the above logic is implemented in `SortFileByRoundRobin`).
- After a compaction succeeds, typically `InstallCompactionResults()`, we choose the next cursor for the input level and save it to `edit`. When calling `LogAndApply`, we save the next cursor with its level into some local variable and finally apply the change to `vstorage` in `SaveTo` function.
- Cursors are persist pair by pair (<level, InternalKey>) in `EncodeTo` so that they can be reconstructed when reopening. An empty cursor will not be encoded to MANIFEST
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10107
Test Plan: add unit test (`CompactionPriRoundRobin`) in `compaction_picker_test`, add `kRoundRobin` priority in `CompactionPriTest` from `db_compaction_test`, and add `PersistRoundRobinCompactCursor` in `db_compaction_test`
Reviewed By: ajkr
Differential Revision: D37316037
Pulled By: littlepig2013
fbshipit-source-id: 9f481748190ace416079139044e00df2968fb1ee
Summary:
There is currently no caching mechanism for blobs, which is not ideal especially when the database resides on remote storage (where we cannot rely on the OS page cache). As part of this task, we would like to make it possible for the application to configure a blob cache.
In this task, we formally introduced the blob source to RocksDB. BlobSource is a new abstraction layer that provides universal access to blobs, regardless of whether they are in the blob cache, secondary cache, or (remote) storage. Depending on user settings, it always fetch blobs from multi-tier cache and storage with minimal cost.
Note: The new `MultiGetBlob()` implementation is not included in the current PR. To go faster, we aim to create a separate PR for it in parallel!
This PR is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10198
Reviewed By: ltamasi
Differential Revision: D37294735
Pulled By: gangliao
fbshipit-source-id: 9cb50422d9dd1bc03798501c2778b6c7520c7a1e
Summary:
One consistency check in SaveTo() is dupilcated with the one within Apply(). Remove one of then in release mode to reduce time spent in DB mutex.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10169
Test Plan: Run existing tests and see nothing breaks.
Reviewed By: ltamasi
Differential Revision: D37157821
fbshipit-source-id: 73b89443a20b43362ff66d10b9212022034a8234
Summary:
include "include/rocksdb/blah.h" is messing up some internal
builds vs. include "rocksdb/blah." This fixes the bad case and adds a
check for future instances.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10213
Test Plan: back-port to 7.4 release candidate and watch internal build
Reviewed By: hx235
Differential Revision: D37296202
Pulled By: pdillinger
fbshipit-source-id: d7cc6b2c57d858dff0444f19320d83c8b4f9b185
Summary:
This bug was discovered after write batch checksum verification before WAL is added (https://github.com/facebook/rocksdb/issues/10114) and stress test with write batch checksum protection is turned on (https://github.com/facebook/rocksdb/issues/10037). In this [line](d5d8920f2c/db/write_batch.cc (L2887)), the number of checksums may not be consistent with `batch->Count()`. This PR fixes this issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10201
Test Plan:
```
./db_stress --batch_protection_bytes_per_key=8 --destroy_db_initially=1 --max_key=100000 --use_txn=1
```
Reviewed By: ajkr
Differential Revision: D37260799
Pulled By: cbi42
fbshipit-source-id: ff8dce7dcce295d689333bc9d892d17a843bf0ea
Summary:
`FlushWAL(true /* sync */)` is used internally and for manual WAL sync. It had a bug when used together with `track_and_verify_wals_in_manifest` where the synced size tracked in MANIFEST was larger than the number of bytes actually synced.
The bug could be repro'd almost immediately with the following crash test command: `python3 tools/db_crashtest.py blackbox --simple --write_buffer_size=524288 --max_bytes_for_level_base=2097152 --target_file_size_base=524288 --duration=3600 --interval=10 --sync_fault_injection=1 --disable_wal=0 --checkpoint_one_in=1000 --max_key=10000 --value_size_mult=33`.
An example error message produced by the above command is shown below. The error sometimes arose from the checkpoint and other times arose from the main stress test DB.
```
Corruption: Size mismatch: WAL (log number: 119) in MANIFEST is 27938 bytes , but actually is 27859 bytes on disk.
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10185
Test Plan:
- repro unit test
- the above crash test command no longer finds the error. It does find a different error after a while longer such as "Corruption: WAL file 481 required by manifest but not in directory list"
Reviewed By: riversand963
Differential Revision: D37200993
Pulled By: ajkr
fbshipit-source-id: 98e0071c1a89f4d009888512ed89f9219779ae5f
Summary:
**Context/Summary:**
https://github.com/facebook/rocksdb/pull/9424 added rate-limiting support for user reads, which does not include batched `MultiGet()`s that call `RandomAccessFileReader::MultiRead()`. The reason is that it's harder (compared with RandomAccessFileReader::Read()) to implement the ideal rate-limiting where we first call `RateLimiter::RequestToken()` for allowed bytes to multi-read and then consume those bytes by satisfying as many requests in `MultiRead()` as possible. For example, it can be tricky to decide whether we want partially fulfilled requests within one `MultiRead()` or not.
However, due to a recent urgent user request, we decide to pursue an elementary (but a conditionally ineffective) solution where we accumulate enough rate limiter requests toward the total bytes needed by one `MultiRead()` before doing that `MultiRead()`. This is not ideal when the total bytes are huge as we will actually consume a huge bandwidth from rate-limiter causing a burst on disk. This is not what we ultimately want with rate limiter. Therefore a follow-up work is noted through TODO comments.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10159
Test Plan:
- Modified existing unit test `DBRateLimiterOnReadTest/DBRateLimiterOnReadTest.NewMultiGet`
- Traced the underlying system calls `io_uring_enter` and verified they are 10 seconds apart from each other correctly under the setting of `strace -ftt -e trace=io_uring_enter ./db_bench -benchmarks=multireadrandom -db=/dev/shm/testdb2 -readonly -num=50 -threads=1 -multiread_batched=1 -batch_size=100 -duration=10 -rate_limiter_bytes_per_sec=200 -rate_limiter_refill_period_us=1000000 -rate_limit_bg_reads=1 -disable_auto_compactions=1 -rate_limit_user_ops=1` where each `MultiRead()` read about 2000 bytes (inspected by debugger) and the rate limiter grants 200 bytes per seconds.
- Stress test:
- Verified `./db_stress (-test_cf_consistency=1/test_batches_snapshots=1) -use_multiget=1 -cache_size=1048576 -rate_limiter_bytes_per_sec=10241024 -rate_limit_bg_reads=1 -rate_limit_user_ops=1` work
Reviewed By: ajkr, anand1976
Differential Revision: D37135172
Pulled By: hx235
fbshipit-source-id: 73b8e8f14761e5d4b77235dfe5d41f4eea968bcd
Summary:
There is currently no caching mechanism for blobs, which is not ideal especially when the database resides on remote storage (where we cannot rely on the OS page cache). As part of this task, we would like to make it possible for the application to configure a blob cache.
In this task, we added a new abstraction layer `BlobSource` to retrieve blobs from either blob cache or raw blob file. Note: For simplicity, the current PR only includes `GetBlob()`. `MultiGetBlob()` will be included in the next PR.
This PR is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10178
Reviewed By: ltamasi
Differential Revision: D37250507
Pulled By: gangliao
fbshipit-source-id: 3fc4a55a0cea955a3147bdc7dba06430e377259b
Summary:
folly DistributedMutex is faster than standard mutexes though
imposes some static obligations on usage. See
https://github.com/facebook/folly/blob/main/folly/synchronization/DistributedMutex.h
for details. Here we use this alternative for our Cache implementations
(especially LRUCache) for better locking performance, when RocksDB is
compiled with folly.
Also added information about which distributed mutex implementation is
being used to cache_bench output and to DB LOG.
Intended follow-up:
* Use DMutex in more places, perhaps improving API to support non-scoped
locking
* Fix linking with fbcode compiler (needs ROCKSDB_NO_FBCODE=1 currently)
Credit: Thanks Siying for reminding me about this line of work that was previously
left unfinished.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10179
Test Plan:
for correctness, existing tests. CircleCI config updated.
Also Meta-internal buck build updated.
For performance, ran simultaneous before & after cache_bench. Out of three
comparison runs, the middle improvement to ops/sec was +21%:
Baseline: USE_CLANG=1 DEBUG_LEVEL=0 make -j24 cache_bench (fbcode
compiler)
```
Complete in 20.201 s; Rough parallel ops/sec = 1584062
Thread ops/sec = 107176
Operation latency (ns):
Count: 32000000 Average: 9257.9421 StdDev: 122412.04
Min: 134 Median: 3623.0493 Max: 56918500
Percentiles: P50: 3623.05 P75: 10288.02 P99: 30219.35 P99.9: 683522.04 P99.99: 7302791.63
```
New: (add USE_FOLLY=1)
```
Complete in 16.674 s; Rough parallel ops/sec = 1919135 (+21%)
Thread ops/sec = 135487
Operation latency (ns):
Count: 32000000 Average: 7304.9294 StdDev: 108530.28
Min: 132 Median: 3777.6012 Max: 91030902
Percentiles: P50: 3777.60 P75: 10169.89 P99: 24504.51 P99.9: 59721.59 P99.99: 1861151.83
```
Reviewed By: anand1976
Differential Revision: D37182983
Pulled By: pdillinger
fbshipit-source-id: a17eb05f25b832b6a2c1356f5c657e831a5af8d1
Summary:
Added an option, `WriteOptions::protection_bytes_per_key`, that controls how many bytes per key we use for integrity protection in `WriteBatch`. It takes effect when `WriteBatch::GetProtectionBytesPerKey() == 0`.
Currently the only supported value is eight. Invoking a user API with it set to any other nonzero value will result in `Status::NotSupported` returned to the user.
There is also a bug fix for integrity protection with `inplace_callback`, where we forgot to take into account the possible change in varint length when calculating KV checksum for the final encoded buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10037
Test Plan:
- Manual
- Set default value of `WriteOptions::protection_bytes_per_key` to eight and ran `make check -j24`
- Enabled in MyShadow for 1+ week
- Automated
- Unit tests have a `WriteMode` that enables the integrity protection via `WriteOptions`
- Crash test - in most cases, use `WriteOptions::protection_bytes_per_key` to enable integrity protection
Reviewed By: cbi42
Differential Revision: D36614569
Pulled By: ajkr
fbshipit-source-id: 8650087ceac9b61b560f1e5fafe5e1baf9c725fb
Summary:
There was an interesting code path not covered by testing that
is difficult to replicate in a unit test, which is now covered using a
sync point. Specifically, the case of table_prefix_extractor == null and
!need_upper_bound_check in `BlockBasedTable::PrefixMayMatch`, which
can happen if table reader is open before extractor is registered with global
object registry, but is later registered and re-set with SetOptions. (We
don't have sufficient testing control over object registry to set that up
repeatedly.)
Also, this function has been renamed to `PrefixRangeMayMatch` for clarity
vs. other functions that are not the same.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10122
Test Plan: unit tests expanded
Reviewed By: siying
Differential Revision: D36944834
Pulled By: pdillinger
fbshipit-source-id: 9e52d9da1929a3e42bbc230fcdc3599949de7bdb
Summary:
In https://github.com/facebook/rocksdb/issues/9535, release 7.0, we hid the old block-based filter from being created using
the public API, because of its inefficiency. Although we normally maintain read compatibility
on old DBs forever, filters are not required for reading a DB, only for optimizing read
performance. Thus, it should be acceptable to remove this code and the substantial
maintenance burden it carries as useful features are developed and validated (such
as user timestamp).
This change completely removes the code for reading and writing the old block-based
filters, net removing about 1370 lines of code no longer needed. Options removed from
testing / benchmarking tools. The prior existence is only evident in a couple of places:
* `CacheEntryRole::kDeprecatedFilterBlock` - We can update this public API enum in
a major release to minimize source code incompatibilities.
* A warning is logged when an old table file is opened that used the old block-based
filter. This is provided as a courtesy, and would be a pain to unit test, so manual testing
should suffice. Unfortunately, sst_dump does not tell you whether a file uses
block-based filter, and the structure of the code makes it very difficult to fix.
* To detect that case, `kObsoleteFilterBlockPrefix` (renamed from `kFilterBlockPrefix`)
for metaindex is maintained (for now).
Other notes:
* In some cases where numbers are associated with filter configurations, we have had to
update the assigned numbers so that they all correspond to something that exists.
* Fixed potential stat counting bug by assuming `filter_checked = false` for cases
like `filter == nullptr` rather than assuming `filter_checked = true`
* Removed obsolete `block_offset` and `prefix_extractor` parameters from several
functions.
* Removed some unnecessary checks `if (!table_prefix_extractor() && !prefix_extractor)`
because the caller guarantees the prefix extractor exists and is compatible
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10184
Test Plan:
tests updated, manually test new warning in LOG using base version to
generate a DB
Reviewed By: riversand963
Differential Revision: D37212647
Pulled By: pdillinger
fbshipit-source-id: 06ee020d8de3b81260ffc36ad0c1202cbf463a80
Summary:
Add a couple of stats to help users estimate the impact of potential MultiGet perf improvements -
1. NUM_LEVEL_READ_PER_MULTIGET - A histogram stat for number of levels that required MultiGet to read from a file
2. MULTIGET_COROUTINE_COUNT - A ticker stat to count the number of times the coroutine version of MultiGetFromSST was used
The NUM_DATA_BLOCKS_READ_PER_LEVEL stat is obsoleted as it doesn't provide useful information for MultiGet optimization.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10182
Reviewed By: akankshamahajan15
Differential Revision: D37213296
Pulled By: anand1976
fbshipit-source-id: 5d2b7708017c0e278578ae4bffac3926f6530efb
Summary:
In CompactionIterator code, there are multiple places where the process
will abort in dbg mode before logging the error message describing the
cause. This PR changes only the logging behavior for compaction iterator so
that error message is written to LOG before the process aborts in debug
mode.
Also updated the triggering condition for an assertion for single delete with
user-defined timestamp.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10183
Test Plan: make check
Reviewed By: akankshamahajan15
Differential Revision: D37190218
Pulled By: riversand963
fbshipit-source-id: 741bb007067be7cfbe94ac9e530ad4b2b339c009
Summary:
A consequence of https://github.com/facebook/rocksdb/issues/9990 was requiring a non-empty DB ID to generate
new SST files. But if the DB ID is not tracked in the manifest and the IDENTITY file
is somehow truncated to 0 bytes, then an empty DB ID would be assigned, leading
to crash. This change ensures a non-empty DB ID is assigned and set in the
IDENTITY file.
Also,
* Some light refactoring to clean up the logic
* (I/O efficiency) If the ID is tracked in the manifest and already matches the
IDENTITY file, don't needlessly overwrite the file.
* (Debugging) Log the DB ID to info log on open, because sometimes IDENTITY
can change if DB is moved around (though it would be unusual for info log to
be copied/moved without IDENTITY file)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10173
Test Plan: unit tests expanded/updated
Reviewed By: ajkr
Differential Revision: D37176545
Pulled By: pdillinger
fbshipit-source-id: a9b414cd35bfa33de48af322a36c24538d50bef1
Summary:
This code is unreachable when `ROCKSDB_LITE` not defined. And it cause build fail on my environment VS2019 16.11.15.
```
-- Selecting Windows SDK version 10.0.19041.0 to target Windows 10.0.19044.
-- The CXX compiler identification is MSVC 19.29.30145.0
-- The C compiler identification is MSVC 19.29.30145.0
-- The ASM compiler identification is MSVC
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10146
Reviewed By: akankshamahajan15
Differential Revision: D37112916
Pulled By: ajkr
fbshipit-source-id: e0b2bf3055d6fac1b3fb40b9f02c4cbae3f82757
Summary:
`PinnableSlice` may hold a handle to a cache value which must be released to correctly decrement the ref-counter. However, when `PinnableSlice` variables are reused, e.g. like this:
```
PinnableSlice pin_slice;
db.Get("foo", &pin_slice);
db.Get("foo", &pin_slice);
```
then the second `Get` simply overwrites the old value in `pin_slice` and the handle returned by the first `Get` is _not_ released.
This PR adds `Reset` calls to the `Get`/`MultiGet` calls that accept `PinnableSlice` arguments to ensure proper cleanup of old values.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10166
Reviewed By: hx235
Differential Revision: D37151632
Pulled By: ajkr
fbshipit-source-id: 9dd3c3288300f560531b843f67db11aeb569a9ff
Summary:
There is currently no caching mechanism for blobs, which is not ideal especially when the database resides on remote storage (where we cannot rely on the OS page cache). As part of this task, we would like to make it possible for the application to configure a blob cache.
This PR is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10155
Reviewed By: ltamasi
Differential Revision: D37150819
Pulled By: gangliao
fbshipit-source-id: b807c7916ea5d411588128f8e22a49f171388fe2
Summary:
We make the size of the per-shard hash table fixed. The base level of the hash table is now preallocated with the required capacity. The user must provide an estimate of the size of the values.
Notice that even though the base level becomes fixed, the chains are still dynamic. Overall, the shard capacity mechanisms haven't changed, so we don't need to test this.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10154
Test Plan: `make -j24 check`
Reviewed By: pdillinger
Differential Revision: D37124451
Pulled By: guidotag
fbshipit-source-id: cba6ac76052fe0ec60b8ff4211b3de7650e80d0c
Summary:
auto_prefix_mode is designed to use prefix filtering in a
particular "safe" set of cases where the upper bound and the seek key
have different prefixes: where the upper bound is the "same length
immediate successor". These conditions are not sufficient to guarantee
the same iteration results as total_order_seek if the DB contains
"short" keys, less than the "full" (maximum) prefix length.
We are not simply disabling the optimization in these successor cases
because it is likely that users are essentially getting what they want
out of existing usage. Especially if users are constructing successor
bounds with the intention of doing a prefix-bounded seek, the existing
behavior is more expected than the total_order_seek behavior.
Consequently, for now we reconcile the bad specification of behavior by
documenting the existing mismatch with total_order_seek.
A closely related issue affects hypothetical comparators like
ReverseBytewiseComparator: if they "correctly" implement
IsSameLengthImmediateSuccessor, auto_prefix_mode could omit more
entries (other than "short" keys noted above). Luckily, the built-in
ReverseBytewiseComparator has an "incorrect" implementation of
IsSameLengthImmediateSuccessor that effectively prevents prefix
optimization and, thus, the bug. This is now documented as a new
constraint on IsSameLengthImmediateSuccessor, and the implementation
tweaked to be simply "safe" rather than "incorrect".
This change also includes unit test updates to demonstrate the above
issues. (Test was cleaned up for readability and simplicity.)
Intended follow-up:
* Tweak documented axioms for prefix_extractor (more details then)
* Consider some sort of fix for this case. I don't know what that would
look like without breaking the performance of existing code. Perhaps
if all keys in an SST file have prefixes that are "full length," we can track
that fact and use it to allow optimization with the "same length
immediate successor", but that would only apply to new files.
* Consider a better system of specifying prefix bounds
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10144
Test Plan: test updates included
Reviewed By: siying
Differential Revision: D37052710
Pulled By: pdillinger
fbshipit-source-id: 5f63b7d65f3f214e4b143e0f9aa1749527c587db
Summary:
FastLRUCache now only supports 16B keys. The tests have changed to reflect this.
Because the unit tests were designed for caches that accept any string as keys, some tests are no longer compatible with FastLRUCache. We have disabled those for runs with FastLRUCache. (We could potentially change all tests to use 16B keys, but we don't because the cache public API does not require this.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10137
Test Plan: make -j24 check
Reviewed By: gitbw95
Differential Revision: D37083934
Pulled By: guidotag
fbshipit-source-id: be1719cf5f8364a9a32bc4555bce1a0de3833b0d
Summary:
In RocksDB, keys are associated with (internal) sequence numbers which denote when the keys are written
to the database. Sequence numbers in different RocksDB instances are unrelated, thus not comparable.
It is nice if we can associate sequence numbers with their corresponding actual timestamps. One thing we can
do is to support user-defined timestamp, which allows the applications to specify the format of custom timestamps
and encode a timestamp with each key. More details can be found at https://github.com/facebook/rocksdb/wiki/User-defined-Timestamp-%28Experimental%29.
This PR provides a different but complementary approach. We can associate rocksdb snapshots (defined in
https://github.com/facebook/rocksdb/blob/7.2.fb/include/rocksdb/snapshot.h#L20) with **user-specified** timestamps.
Since a snapshot is essentially an object representing a sequence number, this PR establishes a bi-directional mapping between sequence numbers and timestamps.
In the past, snapshots are usually taken by readers. The current super-version is grabbed, and a `rocksdb::Snapshot`
object is created with the last published sequence number of the super-version. You can see that the reader actually
has no good idea of what timestamp to assign to this snapshot, because by the time the `GetSnapshot()` is called,
an arbitrarily long period of time may have already elapsed since the last write, which is when the last published
sequence number is written.
This observation motivates the creation of "timestamped" snapshots on the write path. Currently, this functionality is
exposed only to the layer of `TransactionDB`. Application can tell RocksDB to create a snapshot when a transaction
commits, effectively associating the last sequence number with a timestamp. It is also assumed that application will
ensure any two snapshots with timestamps should satisfy the following:
```
snapshot1.seq < snapshot2.seq iff. snapshot1.ts < snapshot2.ts
```
If the application can guarantee that when a reader takes a timestamped snapshot, there is no active writes going on
in the database, then we also allow the user to use a new API `TransactionDB::CreateTimestampedSnapshot()` to create
a snapshot with associated timestamp.
Code example
```cpp
// Create a timestamped snapshot when committing transaction.
txn->SetCommitTimestamp(100);
txn->SetSnapshotOnNextOperation();
txn->Commit();
// A wrapper API for convenience
Status Transaction::CommitAndTryCreateSnapshot(
std::shared_ptr<TransactionNotifier> notifier,
TxnTimestamp ts,
std::shared_ptr<const Snapshot>* ret);
// Create a timestamped snapshot if caller guarantees no concurrent writes
std::pair<Status, std::shared_ptr<const Snapshot>> snapshot = txn_db->CreateTimestampedSnapshot(100);
```
The snapshots created in this way will be managed by RocksDB with ref-counting and potentially shared with
other readers. We provide the following APIs for readers to retrieve a snapshot given a timestamp.
```cpp
// Return the timestamped snapshot correponding to given timestamp. If ts is
// kMaxTxnTimestamp, then we return the latest timestamped snapshot if present.
// Othersise, we return the snapshot whose timestamp is equal to `ts`. If no
// such snapshot exists, then we return null.
std::shared_ptr<const Snapshot> TransactionDB::GetTimestampedSnapshot(TxnTimestamp ts) const;
// Return the latest timestamped snapshot if present.
std::shared_ptr<const Snapshot> TransactionDB::GetLatestTimestampedSnapshot() const;
```
We also provide two additional APIs for stats collection and reporting purposes.
```cpp
Status TransactionDB::GetAllTimestampedSnapshots(
std::vector<std::shared_ptr<const Snapshot>>& snapshots) const;
// Return timestamped snapshots whose timestamps fall in [ts_lb, ts_ub) and store them in `snapshots`.
Status TransactionDB::GetTimestampedSnapshots(
TxnTimestamp ts_lb,
TxnTimestamp ts_ub,
std::vector<std::shared_ptr<const Snapshot>>& snapshots) const;
```
To prevent the number of timestamped snapshots from growing infinitely, we provide the following API to release
timestamped snapshots whose timestamps are older than or equal to a given threshold.
```cpp
void TransactionDB::ReleaseTimestampedSnapshotsOlderThan(TxnTimestamp ts);
```
Before shutdown, RocksDB will release all timestamped snapshots.
Comparison with user-defined timestamp and how they can be combined:
User-defined timestamp persists every key with a timestamp, while timestamped snapshots maintain a volatile
mapping between snapshots (sequence numbers) and timestamps.
Different internal keys with the same user key but different timestamps will be treated as different by compaction,
thus a newer version will not hide older versions (with smaller timestamps) unless they are eligible for garbage collection.
In contrast, taking a timestamped snapshot at a certain sequence number and timestamp prevents all the keys visible in
this snapshot from been dropped by compaction. Here, visible means (seq < snapshot and most recent).
The timestamped snapshot supports the semantics of reading at an exact point in time.
Timestamped snapshots can also be used with user-defined timestamp.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9879
Test Plan:
```
make check
TEST_TMPDIR=/dev/shm make crash_test_with_txn
```
Reviewed By: siying
Differential Revision: D35783919
Pulled By: riversand963
fbshipit-source-id: 586ad905e169189e19d3bfc0cb0177a7239d1bd4
Summary:
When opening an SST file created using index_type=kHashSearch,
the *current* prefix_extractor would be saved, and used with hash index
if the *new current* prefix_extractor at query time is compatible with
the SST file. This is a problem if the prefix_extractor at SST open time
is not compatible but SetOptions later changes (back) to one that is
compatible.
This change fixes that by using the known compatible (or missing) prefix
extractor we save for use with prefix filtering. Detail: I have moved the
InternalKeySliceTransform wrapper to avoid some indirection and remove
unnecessary fields.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10128
Test Plan:
expanded unit test (using some logic from https://github.com/facebook/rocksdb/issues/10122) that fails
before fix and probably covers some other previously uncovered cases.
Reviewed By: siying
Differential Revision: D36955738
Pulled By: pdillinger
fbshipit-source-id: 0c78a6b0d24054ef2f3cb237bf010c1c5589fb10
Summary:
This PR helps handle the race condition mentioned in this comment thread: https://github.com/facebook/rocksdb/pull/7884#discussion_r572402281 In case where actual full_history_ts_low is higher than the user's requested ts, return a try again message so they don't have the misconception that data between [ts, full_history_ts_low) is kept.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10126
Test Plan:
```
$COMPILE_WITH_ASAN=1 make -j24 all
$./db_with_timestamp_basic_test --gtest_filter=UpdateFullHistoryTsLowTest.ConcurrentUpdate
$ make -j24 check
```
Reviewed By: riversand963
Differential Revision: D37055368
Pulled By: jowlyzhang
fbshipit-source-id: 787fd0984a246540fa03ac227b1d232590d27828
Summary:
RocksDB uses WalManager to manage WAL files. In WalManager::ReadFirstLine(), the assumption is that reading the first record of a valid WAL file will return OK status and set the output sequence to non-zero value.
This assumption has been broken by WAL compression which writes a `kSetCompressionType` record which is not associated with any sequence number.
Consequently, WalManager::GetSortedWalsOfType() will skip these WALs and not return them to caller, e.g. Checkpoint, Backup, causing the operations to fail.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10130
Test Plan: - Newly Added test
Reviewed By: riversand963
Differential Revision: D36985744
Pulled By: akankshamahajan15
fbshipit-source-id: dfde7b3be68b6a30b75b49479779748eedf29f7f
Yanqin Jin