Tag:
Branch:
Tree:
b360d25deb
main
oxigraph-8.1.1
oxigraph-8.3.2
oxigraph-main
${ noResults }
7 Commits (b360d25debe2485fd3187f865f5a48f5b618015f)
| Author | SHA1 | Message | Date |
|---|---|---|---|
Akanksha Mahajan
|
49a10feb21 |
Provide implementation to prefetch data asynchronously in FilePrefetchBuffer (#9674)
Summary: In FilePrefetchBuffer if reads are sequential, after prefetching call ReadAsync API to prefetch data asynchronously so that in next prefetching data will be available. Data prefetched asynchronously will be readahead_size/2. It uses two buffers, one for synchronous prefetching and one for asynchronous. In case, the data is overlapping, the data is copied from both buffers to third buffer to make it continuous. This feature is under ReadOptions::async_io and is under experimental. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9674 Test Plan: 1. Add new unit tests 2. Run **db_stress** to make sure nothing crashes. - Normal prefetch without `async_io` ran successfully: ``` export CRASH_TEST_EXT_ARGS=" --async_io=0" make crash_test -j ``` 3. **Run Regressions**. i) Main branch without any change for normal prefetching with async_io disabled: ``` ./db_bench -db=/tmp/prefix_scan_prefetch_main -benchmarks="fillseq" -key_size=32 -value_size=512 -num=5000000 - use_direct_io_for_flush_and_compaction=true -target_file_size_base=16777216 ``` ``` ./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1 Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags RocksDB: version 7.0 Date: Thu Mar 17 13:11:34 2022 CPU: 24 * Intel Core Processor (Broadwell) CPUCache: 16384 KB Keys: 32 bytes each (+ 0 bytes user-defined timestamp) Values: 512 bytes each (256 bytes after compression) Entries: 5000000 Prefix: 0 bytes Keys per prefix: 0 RawSize: 2594.0 MB (estimated) FileSize: 1373.3 MB (estimated) Write rate: 0 bytes/second Read rate: 0 ops/second Compression: Snappy Compression sampling rate: 0 Memtablerep: SkipListFactory Perf Level: 1 ------------------------------------------------ DB path: [/tmp/prefix_scan_prefetch_main] seekrandom : 483618.390 micros/op 2 ops/sec; 338.9 MB/s (249 of 249 found) ``` ii) normal prefetching after changes with async_io disable: ``` ./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_withchange -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1 Initializing RocksDB Options from the specified file Initializing RocksDB Options from command-line flags RocksDB: version 7.0 Date: Thu Mar 17 14:11:31 2022 CPU: 24 * Intel Core Processor (Broadwell) CPUCache: 16384 KB Keys: 32 bytes each (+ 0 bytes user-defined timestamp) Values: 512 bytes each (256 bytes after compression) Entries: 5000000 Prefix: 0 bytes Keys per prefix: 0 RawSize: 2594.0 MB (estimated) FileSize: 1373.3 MB (estimated) Write rate: 0 bytes/second Read rate: 0 ops/second Compression: Snappy Compression sampling rate: 0 Memtablerep: SkipListFactory Perf Level: 1 ------------------------------------------------ DB path: [/tmp/prefix_scan_prefetch_withchange] seekrandom : 471347.227 micros/op 2 ops/sec; 348.1 MB/s (255 of 255 found) ``` Reviewed By: anand1976 Differential Revision: D34731543 Pulled By: akankshamahajan15 fbshipit-source-id: 8e23aa93453d5fe3c672b9231ad582f60207937f |
3 years ago |
|
Peter Dillinger
|
230660be73 |
Improve / clean up meta block code & integrity (#9163)
Summary:
* Checksums are now checked on meta blocks unless specifically
suppressed or not applicable (e.g. plain table). (Was other way around.)
This means a number of cases that were not checking checksums now are,
including direct read TableProperties in Version::GetTableProperties
(fixed in meta_blocks ReadTableProperties), reading any block from
PersistentCache (fixed in BlockFetcher), read TableProperties in
SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open,
maybe more.
* For that to work, I moved the global_seqno+TableProperties checksum
logic to the shared table/ code, because that is used by many utilies
such as SstFileDumper.
* Also for that to work, we have to know when we're dealing with a block
that has a checksum (trailer), so added that capability to Footer based
on magic number, and from there BlockFetcher.
* Knowledge of trailer presence has also fixed a problem where other
table formats were reading blocks including bytes for a non-existant
trailer--and awkwardly kind-of not using them, e.g. no shared code
checking checksums. (BlockFetcher compression type was populated
incorrectly.) Now we only read what is needed.
* Minimized code duplication and differing/incompatible/awkward
abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block
without parsing block handle)
* Moved some meta block handling code from table_properties*.*
* Moved some code specific to block-based table from shared table/ code
to BlockBasedTable class. The checksum stuff means we can't completely
separate it, but things that don't need to be in shared table/ code
should not be.
* Use unique_ptr rather than raw ptr in more places. (Note: you can
std::move from unique_ptr to shared_ptr.)
Without enhancements to GetPropertiesOfAllTablesTest (see below),
net reduction of roughly 100 lines of code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163
Test Plan:
existing tests and
* Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that
checksums are now checked on direct read of table properties by TableCache
(new test would fail before this change)
* Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test
putting table properties under old meta name
* Also generally enhanced that same test to actually test what it was
supposed to be testing already, by kicking things out of table cache when
we don't want them there.
Reviewed By: ajkr, mrambacher
Differential Revision: D32514757
Pulled By: pdillinger
fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9
|
3 years ago |
|
Akanksha Mahajan
|
17ce1ca48b |
Reuse internal auto readhead_size at each Level (expect L0) for Iterations (#9056)
Summary: RocksDB does auto-readahead for iterators on noticing more than two sequential reads for a table file if user doesn't provide readahead_size. The readahead starts at 8KB and doubles on every additional read up to max_auto_readahead_size. However at each level, if iterator moves over next file, readahead_size starts again from 8KB. This PR introduces a new ReadOption "adaptive_readahead" which when set true will maintain readahead_size at each level. So when iterator moves from one file to another, new file's readahead_size will continue from previous file's readahead_size instead of scratch. However if reads are not sequential it will fall back to 8KB (default) with no prefetching for that block. 1. If block is found in cache but it was eligible for prefetch (block wasn't in Rocksdb's prefetch buffer), readahead_size will decrease by 8KB. 2. It maintains readahead_size for L1 - Ln levels. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9056 Test Plan: Added new unit tests Ran db_bench for "readseq, seekrandom, seekrandomwhilewriting, readrandom" with --adaptive_readahead=true and there was no regression if new feature is enabled. Reviewed By: anand1976 Differential Revision: D31773640 Pulled By: akankshamahajan15 fbshipit-source-id: 7332d16258b846ae5cea773009195a5af58f8f98 |
3 years ago |
|
Akanksha Mahajan
|
a0e0feca62 |
Improve BlockPrefetcher to prefetch only for sequential scans (#7394)
Summary: BlockPrefetcher is used by iterators to prefetch data if they anticipate more data to be used in future and this is valid for forward sequential scans. But BlockPrefetcher tracks only num_file_reads_ and not if reads are sequential. This presents problem for MultiGet with large number of keys when it reseeks index iterator and data block. FilePrefetchBuffer can end up doing large readahead for reseeks as readahead size increases exponentially once readahead is enabled. Same issue is with BlockBasedTableIterator. Add previous length and offset read as well in BlockPrefetcher (creates FilePrefetchBuffer) and FilePrefetchBuffer (does prefetching of data) to determine if reads are sequential and then prefetch. Update the last block read after cache hit to take reads from cache also in account. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7394 Test Plan: Add new unit test case Reviewed By: anand1976 Differential Revision: D23737617 Pulled By: akankshamahajan15 fbshipit-source-id: 8e6917c25ed87b285ee495d1b68dc623d71205a3 |
3 years ago |
|
Akanksha Mahajan
|
cd79a00903 |
Make BlockBasedTable::kMaxAutoReadAheadSize configurable (#7951)
Summary: RocksDB does auto-readahead for iterators on noticing more than two reads for a table file. The readahead starts at 8KB and doubles on every additional read upto BlockBasedTable::kMaxAutoReadAheadSize which is 256*1024. This PR adds a new option BlockBasedTableOptions::max_auto_readahead_size which replaces BlockBasedTable::kMaxAutoReadAheadSize and the new option can be configured. If max_auto_readahead_size is set 0 then no implicit auto prefetching will be done. If max_auto_readahead_size provided is less than 8KB (which is initial readahead size used by rocksdb in case of auto-readahead), readahead size will remain same as max_auto_readahead_size. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7951 Test Plan: Add new unit test case. Reviewed By: anand1976 Differential Revision: D26568085 Pulled By: akankshamahajan15 fbshipit-source-id: b6543520fc74e97d859f2002328d4c5254d417af |
4 years ago |
|
Jay Zhuang
|
c2485f2d81 |
Add buffer prefetch support for non directIO usecase (#7312)
Summary: A new file interface `SupportPrefetch()` is added. When the user overrides it to `false`, an internal prefetch buffer will be used for readahead. Useful for non-directIO but FS doesn't have readahead support. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7312 Reviewed By: anand1976 Differential Revision: D23329847 Pulled By: jay-zhuang fbshipit-source-id: 71cd4ce6f4a820840294e4e6aec111ab76175527 |
4 years ago |
|
sdong
|
d66908091d |
De-template block based table iterator (#6531)
Summary: Right now block based table iterator is used as both of iterating data for block based table, and for the index iterator for partitioend index. This was initially convenient for introducing a new iterator and block type for new index format, while reducing code change. However, these two usage doesn't go with each other very well. For example, Prev() is never called for partitioned index iterator, and some other complexity is maintained in block based iterators, which is not needed for index iterator but maintainers will always need to reason about it. Furthermore, the template usage is not following Google C++ Style which we are following, and makes a large chunk of code tangled together. This commit separate the two iterators. Right now, here is what it is done: 1. Copy the block based iterator code into partitioned index iterator, and de-template them. 2. Remove some code not needed for partitioned index. The upper bound check and tricks are removed. We never tested performance for those tricks when partitioned index is enabled in the first place. It's unlikelyl to generate performance regression, as creating new partitioned index block is much rarer than data blocks. 3. Separate out the prefetch logic to a helper class and both classes call them. This commit will enable future follow-ups. One direction is that we might separate index iterator interface for data blocks and index blocks, as they are quite different. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6531 Test Plan: build using make and cmake. And build release Differential Revision: D20473108 fbshipit-source-id: e48011783b339a4257c204cc07507b171b834b0f |
5 years ago |