Summary:
For performance purposes, the lower level routines were changed to use a SystemClock* instead of a std::shared_ptr<SystemClock>. The shared ptr has some performance degradation on certain hardware classes.
For most of the system, there is no risk of the pointer being deleted/invalid because the shared_ptr will be stored elsewhere. For example, the ImmutableDBOptions stores the Env which has a std::shared_ptr<SystemClock> in it. The SystemClock* within the ImmutableDBOptions is essentially a "short cut" to gain access to this constant resource.
There were a few classes (PeriodicWorkScheduler?) where the "short cut" property did not hold. In those cases, the shared pointer was preserved.
Using db_bench readrandom perf_level=3 on my EC2 box, this change performed as well or better than 6.17:
6.17: readrandom : 28.046 micros/op 854902 ops/sec; 61.3 MB/s (355999 of 355999 found)
6.18: readrandom : 32.615 micros/op 735306 ops/sec; 52.7 MB/s (290999 of 290999 found)
PR: readrandom : 27.500 micros/op 871909 ops/sec; 62.5 MB/s (367999 of 367999 found)
(Note that the times for 6.18 are prior to revert of the SystemClock).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8033
Reviewed By: pdillinger
Differential Revision: D27014563
Pulled By: mrambacher
fbshipit-source-id: ad0459eba03182e454391b5926bf5cdd45657b67
Summary:
Introduces and uses a SystemClock class to RocksDB. This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.
Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead. There are likely more places that can be changed, but this is a start to show what can/should be done. Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.
There are several Env classes that implement these functions. Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR. It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).
Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858
Reviewed By: pdillinger
Differential Revision: D26006406
Pulled By: mrambacher
fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
Summary:
The patch adds blob file support to the `Get` API by extending `Version` so that
whenever a blob reference is read from a file, the blob is retrieved from the corresponding
blob file and passed back to the caller. (This is assuming the blob reference is valid
and the blob file is actually part of the given `Version`.) It also introduces a cache
of `BlobFileReader`s called `BlobFileCache` that enables sharing `BlobFileReader`s
between callers. `BlobFileCache` uses the same backing cache as `TableCache`, so
`max_open_files` (if specified) limits the total number of open (table + blob) files.
TODO: proactively open/cache blob files and pin the cache handles of the readers in the
metadata objects similarly to what `VersionBuilder::LoadTableHandlers` does for
table files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7540
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D24260219
Pulled By: ltamasi
fbshipit-source-id: a8a2a4f11d3d04d6082201b52184bc4d7b0857ba
Summary:
The patch does some cleanup in and around the legacy `BlobLogReader` class:
* It renames the class to `BlobLogSequentialReader` to emphasize that it is for
sequentially iterating through blobs in a blob file, as opposed to doing random
point reads using `BlobIndex`es (which is `BlobFileReader`'s jurisdiction).
* It removes some dead code from the old BlobDB implementation that references
`BlobLogReader` (namely the method `BlobFile::OpenRandomAccessReader`).
* It cleans up some `#include`s and forward declarations.
* It fixes some incorrect/outdated comments related to the reader class.
* It adds a few assertions to the `Read` methods of the class.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7517
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D24172611
Pulled By: ltamasi
fbshipit-source-id: 43e2ae1eba5c3dd30c1070cb00f217edc45bd64f
Summary:
The patch adds a class called `BlobFileBuilder` that can be used to build
and cut blob files in background jobs (flushes/compactions). The class
enforces a value size threshold (`min_blob_size`; smaller blobs will be inlined
in the LSM tree itself), and supports specifying a blob file size limit (`blob_file_size`),
as well as compression (`blob_compression_type`) and checksums for blob files.
It also keeps track of the generated blob files and their associated `BlobFileAddition`
metadata, which can be applied as part of the background job's `VersionEdit`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7306
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23298817
Pulled By: ltamasi
fbshipit-source-id: 38f35d81dab1ba81f15236240612ec173d7f21b5
Summary:
The patch makes sure that the functionality required for the new integrated
BlobDB implementation (most importantly, the classes related to reading and
writing blob files) is also built in LITE mode by removing the corresponding
`#ifndef`s.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7272
Test Plan: Ran `make check` in both regular and LITE mode.
Reviewed By: zhichao-cao
Differential Revision: D23173280
Pulled By: ltamasi
fbshipit-source-id: 1596bd1a76409a8a6d83d8f1dbfe08bfdea7ffe6
Summary:
Calculate ```IOOptions::timeout``` using ```ReadOptions::deadline``` and pass it to ```FileSystem::Read/FileSystem::MultiRead```. This allows us to impose a tighter bound on the time taken by Get/MultiGet on FileSystem/Envs that support IO timeouts. Even on those that don't support, check in ```RandomAccessFileReader::Read``` and ```MultiRead``` and return ```Status::TimedOut()``` if the deadline is exceeded.
For now, TableReader creation, which might do file opens and reads, are not covered. It will be implemented in another PR.
Tests:
Update existing unit tests to verify the correct timeout value is being passed
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6751
Reviewed By: riversand963
Differential Revision: D21285631
Pulled By: anand1976
fbshipit-source-id: d89af843e5a91ece866e87aa29438b52a65a8567
Summary:
In direct IO mode, RandomAccessFileReader::Read allocates an internal aligned buffer, and then copies the result into the scratch buffer. If the result is only temporarily used inside a function, there is no need to do the memcpy and just let the result Slice refer to the internally allocated buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6455
Test Plan: make check
Differential Revision: D20106753
Pulled By: cheng-chang
fbshipit-source-id: 44f505843837bba47a56e3fa2c4dd3bd76486b58
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
file_reader_writer.h and .cc contain several files and helper function, and it's hard to navigate. Separate it to multiple files and put them under file/
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5803
Test Plan: Build whole project using make and cmake.
Differential Revision: D17374550
fbshipit-source-id: 10efca907721e7a78ed25bbf74dc5410dea05987
Summary:
The code convention we are following, Google C++ Style, discourage
alias in header files, especially public headers:
https://google.github.io/styleguide/cppguide.html#Aliases
Remove some of them. Might removed some from .cc files as well to be consistent.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5113
Differential Revision: D14633030
Pulled By: siying
fbshipit-source-id: b990edc919d5de60295992284f980195e501d424
Summary:
As pointed out in #4059, we miss use string as buffer for file read. Changing to use char array instead.
Closing #4059
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4662
Differential Revision: D13012998
Pulled By: yiwu-arbug
fbshipit-source-id: 41234ba17c0bccea65bd647e362a0e979152bd1e
Summary:
As you know, almost all compilers support "pragma once" keyword instead of using include guards. To be keep consistency between header files, all header files are edited.
Besides this, try to fix some warnings about loss of data.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4339
Differential Revision: D9654990
Pulled By: ajkr
fbshipit-source-id: c2cf3d2d03a599847684bed81378c401920ca848
Summary:
Enable readahead for blob DB garbage collection, which should improve GC performance a little bit.
Closes https://github.com/facebook/rocksdb/pull/3648
Differential Revision: D7383791
Pulled By: yiwu-arbug
fbshipit-source-id: 642b3327f7105eca85986d3fb2d8f960a3d83cf1
Summary:
Adding a list of blob db counters.
Also remove WaStats() which doesn't expose the stats and can be substitute by (BLOB_DB_BYTES_WRITTEN / BLOB_DB_BLOB_FILE_BYTES_WRITTEN).
Closes https://github.com/facebook/rocksdb/pull/3193
Differential Revision: D6394216
Pulled By: yiwu-arbug
fbshipit-source-id: 017508c8ff3fcd7ea7403c64d0f9834b24816803
Summary:
Changing blob file format and some code cleanup around the change. The change with blob log format are:
* Remove timestamp field in blob file header, blob file footer and blob records. The field is not being use and often confuse with expiration field.
* Blob file header now come with column family id, which always equal to default column family id. It leaves room for future support of column family.
* Compression field in blob file header now is a standalone byte (instead of compact encode with flags field)
* Blob file footer now come with its own crc.
* Key length now being uint64_t instead of uint32_t
* Blob CRC now checksum both key and value (instead of value only).
* Some reordering of the fields.
The list of cleanups:
* Better inline comments in blob_log_format.h
* rename ttlrange_t and snrange_t to ExpirationRange and SequenceRange respectively.
* simplify blob_db::Reader
* Move crc checking logic to inside blob_log_format.cc
Closes https://github.com/facebook/rocksdb/pull/3081
Differential Revision: D6171304
Pulled By: yiwu-arbug
fbshipit-source-id: e4373e0d39264441b7e2fbd0caba93ddd99ea2af
Summary:
Previously each time we write a blob we write blog_record_header + key + value + blob_record_footer to blob log. The footer only contains a sequence and a crc for the sequence number. The sequence number was used in garbage collection to verify the value is recent. After #2703 we moved to use optimistic transaction and no longer use sequence number from the footer. Remove the footer altogether.
There's another usage of sequence number and we are keeping it: Each blob log file keep track of sequence number range of keys in it, and use it to check if it is reference by a snapshot, before being deleted.
Closes https://github.com/facebook/rocksdb/pull/3005
Differential Revision: D6057585
Pulled By: yiwu-arbug
fbshipit-source-id: d6da53c457a316e9723f359a1b47facfc3ffe090
Summary:
While GC, blob DB use optimistic transaction to delete or replace the index entry in LSM, to guarantee correctness if there's a normal write writing to the same key. However, the previous implementation doesn't call SetSnapshot() nor use GetForUpdate() of transaction API, instead it do its own sequence number checking before beginning the transaction. A normal write can sneak in after the sequence number check and overwrite the key, and the GC will delete or relocate the old version of the key by mistake. Update the code to property use GetForUpdate() to check the existing index entry.
After the patch the sequence number store with each blob record is useless, So I'm considering remove the sequence number from blob record, in another patch.
Closes https://github.com/facebook/rocksdb/pull/2703
Differential Revision: D5589178
Pulled By: yiwu-arbug
fbshipit-source-id: 8dc960cd5f4e61b36024ba7c32d05584ce149c24
Summary:
This reverts the previous commit 1d7048c598, which broke the build.
Did a `git revert 1d7048c`.
Closes https://github.com/facebook/rocksdb/pull/2627
Differential Revision: D5476473
Pulled By: sagar0
fbshipit-source-id: 4756ff5c0dfc88c17eceb00e02c36176de728d06
Summary: This uses `clang-tidy` to comment out unused parameters (in functions, methods and lambdas) in fbcode. Cases that the tool failed to handle are fixed manually.
Reviewed By: igorsugak
Differential Revision: D5454343
fbshipit-source-id: 5dee339b4334e25e963891b519a5aa81fbf627b2
mrambacher