Summary:
Added an option, `WriteOptions::protection_bytes_per_key`, that controls how many bytes per key we use for integrity protection in `WriteBatch`. It takes effect when `WriteBatch::GetProtectionBytesPerKey() == 0`.
Currently the only supported value is eight. Invoking a user API with it set to any other nonzero value will result in `Status::NotSupported` returned to the user.
There is also a bug fix for integrity protection with `inplace_callback`, where we forgot to take into account the possible change in varint length when calculating KV checksum for the final encoded buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10037
Test Plan:
- Manual
- Set default value of `WriteOptions::protection_bytes_per_key` to eight and ran `make check -j24`
- Enabled in MyShadow for 1+ week
- Automated
- Unit tests have a `WriteMode` that enables the integrity protection via `WriteOptions`
- Crash test - in most cases, use `WriteOptions::protection_bytes_per_key` to enable integrity protection
Reviewed By: cbi42
Differential Revision: D36614569
Pulled By: ajkr
fbshipit-source-id: 8650087ceac9b61b560f1e5fafe5e1baf9c725fb
Summary:
This PR does not affect write-committed.
Add a member, `rollback_deletion_type_callback` to TransactionDBOptions
so that a write-prepared transaction, when rolling back, can call this
callback to decide if a `Delete` or `SingleDelete` should be used to
cancel a prior `Put` written to the database during prepare phase.
The purpose of this PR is to prevent mixing `Delete` and `SingleDelete`
for the same key, causing undefined behaviors. Without this PR, the
following can happen:
```
// The application always issues SingleDelete when deleting keys.
txn1->Put('a');
txn1->Prepare(); // writes to memtable and potentially gets flushed/compacted to Lmax
txn1->Rollback(); // inserts DELETE('a')
txn2->Put('a');
txn2->Commit(); // writes to memtable and potentially gets flushed/compacted
```
In the database, we may have
```
L0: [PUT('a', s=100)]
L1: [DELETE('a', s=90)]
Lmax: [PUT('a', s=0)]
```
If a compaction compacts L0 and L1, then we have
```
L1: [PUT('a', s=100)]
Lmax: [PUT('a', s=0)]
```
If a future transaction issues a SingleDelete, we have
```
L0: [SD('a', s=110)]
L1: [PUT('a', s=100)]
Lmax: [PUT('a', s=0)]
```
Then, a compaction including L0, L1 and Lmax leads to
```
Lmax: [PUT('a', s=0)]
```
which is incorrect.
Similar bugs reported and addressed in
https://github.com/cockroachdb/pebble/issues/1255. Based on our team's
current priority, we have decided to take this approach for now. We may
come back and revisit in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9873
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D35762170
Pulled By: riversand963
fbshipit-source-id: b28d56eefc786b53c9844b9ef4a7807acdd82c8d
Summary:
For write-prepared/write-unprepared transactions,
GetCommitTimeWriteBatch() can be used only if the transaction is started
with `TransactionOptions::use_only_the_last_commit_time_batch_for_recovery` set
to true. Otherwise, it is possible that multiple uncommitted versions of the
same key exist in the database. During bottommost compaction, RocksDB may
set the sequence numbers of both to zero once they become committed, causing
output SST file to have two identical internal keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9794
Test Plan:
make check
pay special attention to the following
```
transaction_test --gtest_filter=MySQLStyleTransactionTest/MySQLStyleTransactionTest.TransactionStressTest/*
```
Reviewed By: lth
Differential Revision: D35327214
Pulled By: riversand963
fbshipit-source-id: 3bae00a28359c10e96e4c6f676d20de5610d8a0f
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9162
Existing TransactionUtil::CheckKeyForConflict() performs only seq-based
conflict checking. If user-defined timestamp is enabled, it should perform
conflict checking based on timestamps too.
Update TransactionUtil::CheckKey-related methods to verify the timestamp of the
latest version of a key is smaller than the read timestamp. Note that
CheckKeysForConflict() is not updated since it's used only by optimistic
transaction, and we do not plan to update it in this upcoming batch of diffs.
Existing GetLatestSequenceForKey() returns the sequence of the latest
version of a specific user key. Since we support user-defined timestamp, we
need to update this method to also return the timestamp (if enabled) of the
latest version of the key. This will be needed for snapshot validation.
Reviewed By: ltamasi
Differential Revision: D31567960
fbshipit-source-id: 2e4a14aed267435a9aa91bc632d2411c01946d44
Summary:
This PR tries to remove some unnecessary checks as well as unreachable code blocks to
improve readability. An obvious non-public API method naming typo is also corrected.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8565
Test Plan: make check
Reviewed By: lth
Differential Revision: D29963984
Pulled By: riversand963
fbshipit-source-id: cc96e8f09890e5cfe9b20eadb63bdca5484c150a
Summary:
When `ASSERT_STATUS_CHECKED` is enabled, `transaction_test` does not pass without this PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7572
Test Plan: `ASSERT_STATUS_CHECKED=1 make -j32 transaction_test && ./transaction_test`
Reviewed By: zhichao-cao
Differential Revision: D24404319
Pulled By: cheng-chang
fbshipit-source-id: 13689035995366ab06d8eada3ea404e45fef8bc5
Summary:
The dynamic_cast in the filter benchmark causes release mode to fail due to
no-rtti. Replace with static_cast_with_check.
Signed-off-by: Derrick Pallas <derrick@pallas.us>
Addition by peterd: Remove unnecessary 2nd template arg on all static_cast_with_check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6732
Reviewed By: ltamasi
Differential Revision: D21304260
Pulled By: pdillinger
fbshipit-source-id: 6e8eb437c4ca5a16dbbfa4053d67c4ad55f1608c
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
**NOTE**: this also needs to be back-ported to 6.4.6 and possibly older branches if further releases from them is envisaged.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6081
Differential Revision: D18710107
Pulled By: zhichao-cao
fbshipit-source-id: 03260f9316566e2bfc12c7d702d6338bb7941e01
Summary:
This is a new API added to db.h to allow for fetching all merge operands associated with a Key. The main motivation for this API is to support use cases where doing a full online merge is not necessary as it is performance sensitive. Example use-cases:
1. Update subset of columns and read subset of columns -
Imagine a SQL Table, a row is encoded as a K/V pair (as it is done in MyRocks). If there are many columns and users only updated one of them, we can use merge operator to reduce write amplification. While users only read one or two columns in the read query, this feature can avoid a full merging of the whole row, and save some CPU.
2. Updating very few attributes in a value which is a JSON-like document -
Updating one attribute can be done efficiently using merge operator, while reading back one attribute can be done more efficiently if we don't need to do a full merge.
----------------------------------------------------------------------------------------------------
API :
Status GetMergeOperands(
const ReadOptions& options, ColumnFamilyHandle* column_family,
const Slice& key, PinnableSlice* merge_operands,
GetMergeOperandsOptions* get_merge_operands_options,
int* number_of_operands)
Example usage :
int size = 100;
int number_of_operands = 0;
std::vector<PinnableSlice> values(size);
GetMergeOperandsOptions merge_operands_info;
db_->GetMergeOperands(ReadOptions(), db_->DefaultColumnFamily(), "k1", values.data(), merge_operands_info, &number_of_operands);
Description :
Returns all the merge operands corresponding to the key. If the number of merge operands in DB is greater than merge_operands_options.expected_max_number_of_operands no merge operands are returned and status is Incomplete. Merge operands returned are in the order of insertion.
merge_operands-> Points to an array of at-least merge_operands_options.expected_max_number_of_operands and the caller is responsible for allocating it. If the status returned is Incomplete then number_of_operands will contain the total number of merge operands found in DB for key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5604
Test Plan:
Added unit test and perf test in db_bench that can be run using the command:
./db_bench -benchmarks=getmergeoperands --merge_operator=sortlist
Differential Revision: D16657366
Pulled By: vjnadimpalli
fbshipit-source-id: 0faadd752351745224ee12d4ae9ef3cb529951bf
Summary:
if read_options.snapshot is not set, ::Get will take the last sequence number after taking a super-version and uses that as the sequence number. Theoretically max_eviceted_seq_ could advance this sequence number. This could lead ::IsInSnapshot that will be invoked by the ReadCallback to notice the absence of the snapshot. In this case, the ReadCallback should have passed a non-value to snap_released so that it could be set by the ::IsInSnapshot. The patch does that, and adds a unit test to verify it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5664
Differential Revision: D16614033
Pulled By: maysamyabandeh
fbshipit-source-id: 06fb3fd4aacd75806ed1a1acec7961f5d02486f2
Summary:
The `TransactionTest.MultiGetBatchedTest` were failing with unprepared batches because we were not using the correct callbacks. Override MultiGet to pass down the correct ReadCallback. A similar problem is also fixed in WritePrepared.
This PR also fixes an issue similar to (https://github.com/facebook/rocksdb/pull/5147), but for MultiGet instead of Get.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5634
Differential Revision: D16552674
Pulled By: lth
fbshipit-source-id: 736eaf8e919c6b13d5f5655b1c0d36b57ad04804
Summary:
The patch reduces the contention over prepared_mutex_ using these techniques:
1) Move ::RemovePrepared() to be called from the commit callback when we have two write queues.
2) Use two separate mutex for PreparedHeap, one prepared_mutex_ needed for ::RemovePrepared, and one ::push_pop_mutex() needed for ::AddPrepared(). Given that we call ::AddPrepared only from the first write queue and ::RemovePrepared mostly from the 2nd, this will result into each the two write queues not competing with each other over a single mutex. ::RemovePrepared might occasionally need to acquire ::push_pop_mutex() if ::erase() ends up with calling ::pop()
3) Acquire ::push_pop_mutex() on the first callback of the write queue and release it on the last.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5420
Differential Revision: D15741985
Pulled By: maysamyabandeh
fbshipit-source-id: 84ce8016007e88bb6e10da5760ba1f0d26347735
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
When ReadOption doesn't specify a snapshot, WritePrepared::Get used kMaxSequenceNumber to avoid the cost of creating a new snapshot object (that requires sync over db_mutex). This creates a race condition if it is reading from the writes of a transaction that had duplicate keys: each instance of duplicate key is inserted with a different sequence number and depending on the ordering the ::Get might skip the newer one and read the older one that is obsolete.
The patch fixes that by using last published seq as the snapshot sequence number. It also adds a check after the read is done to ensure that the max_evicted_seq has not advanced the aforementioned seq, which is a very unlikely event. If it did, then the read is not valid since the seq is not backed by an actually snapshot to let IsInSnapshot handle that properly when an overlapping commit is evicted from commit cache.
A unit test is added to reproduce the race condition with duplicate keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5147
Differential Revision: D14758815
Pulled By: maysamyabandeh
fbshipit-source-id: a56915657132cf6ba5e3f5ea1b5d78c803407719
Summary:
In prepare phase of 2PC, the db promises to remember the prepared data, for possible future commits. To fulfill the promise the prepared data must be persisted in the WAL so that they could be recovered after a crash. The log that contains a prepare batch that is not committed yet, is marked so that it is not garbage collected before the transaction commits/rollbacks. The bug was that the write to the log file and the mark of the file was not atomic, and WAL gc could have happened before the WAL log is actually marked. This patch moves the marking logic to PreReleaseCallback so that the WAL gc logic that joins both write threads would see the WAL write and WAL mark atomically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5121
Differential Revision: D14665210
Pulled By: maysamyabandeh
fbshipit-source-id: 1d66aeb1c66a296cb4899a5a20c4d40c59e4b534
Summary:
WriteUnPrepared adds a virtual function, MaxUnpreparedSequenceNumber, to ReadCallback, which returns 0 unless WriteUnPrepared is enabled and the transaction has uncommitted data written to the DB. Together with snapshot sequence number, this determines the last sequence that is visible to reads.
The patch clarifies the guarantees of the GetIterator API in WriteUnPrepared transactions and make use of that to statically initialize the read callback and thus avoid the virtual call.
Furthermore it increases the minimum value for min_uncommitted from 0 to 1 as seq 0 is used only for last level keys that are committed in all snapshots.
The following benchmark shows +0.26% higher throughput in seekrandom benchmark.
Benchmark:
./db_bench --benchmarks=fillrandom --use_existing_db=0 --num=1000000 --db=/dev/shm/dbbench
./db_bench --benchmarks=seekrandom[X10] --use_existing_db=1 --db=/dev/shm/dbbench --num=1000000 --duration=60 --seek_nexts=100
seekrandom [AVG 10 runs] : 20355 ops/sec; 225.2 MB/sec
seekrandom [MEDIAN 10 runs] : 20425 ops/sec; 225.9 MB/sec
./db_bench_lessvirtual3 --benchmarks=seekrandom[X10] --use_existing_db=1 --db=/dev/shm/dbbench --num=1000000 --duration=60 --seek_nexts=100
seekrandom [AVG 10 runs] : 20409 ops/sec; 225.8 MB/sec
seekrandom [MEDIAN 10 runs] : 20487 ops/sec; 226.6 MB/sec
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5049
Differential Revision: D14366459
Pulled By: maysamyabandeh
fbshipit-source-id: ebaff8908332a5ae9af7defeadabcb624be660ef
Summary:
The patch adds the sequence number of the rollback patch to the PrepareHeap when two_write_queues is enabled. Although the current behavior is still correct, the change simplifies reasoning about the code, by having all uncommitted batches registered with the PreparedHeap.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5026
Differential Revision: D14249401
Pulled By: maysamyabandeh
fbshipit-source-id: 1e3424edee5cd14e56ee35931ad3c93ed997cd5a
Summary:
When two_write_queues is enabled we call ::AddPrepared only from the main queue, which writes to both WAL and memtable, and call ::AddCommitted from the 2nd queue, which writes only to WAL. This simplifies the logic by avoiding concurrency between AddPrepared and also between AddCommitted. The patch fixes one case that did not conform with the rule above. This would allow future refactoring. For example AdvaneMaxEvictedSeq, which is invoked by AddCommitted, can be simplified by assuming lack of concurrent calls to it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5014
Differential Revision: D14210493
Pulled By: maysamyabandeh
fbshipit-source-id: 6db5ba372a294a568a14caa010576460917a4eab
Summary:
ValidateSnapshot checks if another txn has committed a value to about-to-be-locked key since a particular snapshot. It applies an optimization of looking into only the memtable if snapshot seq is larger than the earliest seq in the memtables. With a long-running txn in WritePrepared, the prepared value might be flushed out to the disk and yet it commits after the snapshot, which breaks this optimization. The patch fixes that by disabling this optimization when the min_uncomitted seq at the time the snapshot was taken is lower than earliest seq in the memtables.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4961
Differential Revision: D14009947
Pulled By: maysamyabandeh
fbshipit-source-id: 1d11679950326f7c4094b433e6b821b729f08850
Summary:
Fix how CompactionIterator::findEarliestVisibleSnapshots handles released snapshot. It fixing the two scenarios:
Scenario 1:
key1 has two values v1 and v2. There're two snapshots s1 and s2 taken after v1 and v2 are committed. Right after compaction output v2, s1 is released. Now findEarliestVisibleSnapshot may see s1 being released, and return the next snapshot, which is s2. That's larger than v2's earliest visible snapshot, which was s1.
The fix: the only place we check against last snapshot and current key snapshot is when we decide whether to compact out a value if it is hidden by a later value. In the check if we see current snapshot is even larger than last snapshot, we know last snapshot is released, and we are safe to compact out current key.
Scenario 2:
key1 has two values v1 and v2. there are two snapshots s1 and s2 taken after v1 and v2 are committed. During compaction before we process the key, s1 is released. When compaction process v2, snapshot checker may return kSnapshotReleased, and the earliest visible snapshot for v2 become s2. When compaction process v1, snapshot checker may return kIsInSnapshot (for WritePrepared transaction, it could be because v1 is still in commit cache). The result will become inconsistent here.
The fix: remember the set of released snapshots ever reported by snapshot checker, and ignore them when finding result for findEarliestVisibleSnapshot.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4890
Differential Revision: D13705538
Pulled By: maysamyabandeh
fbshipit-source-id: e577f0d9ee1ff5a6035f26859e56902ecc85a5a4
Summary:
The AdvanceMaxEvictedSeq algorithm assumes that new snapshots always have sequence number larger than the last max_evicted_seq_. To enforce this assumption we make two changes:
i) max is not advanced beyond the last published seq, with the exception that the evicted commit entry itself is not published yet, which is quite rare.
ii) When obtaining the snapshot if the max_evicted_seq_ is not published yet, commit a dummy entry so that it waits for it to be published and also increased the latest published seq by one above the max.
To test these non-realistic corner cases we create a commit cache with size 1 so that every single commit results into eviction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4886
Differential Revision: D13685270
Pulled By: maysamyabandeh
fbshipit-source-id: 5461bc09c2a9b75798bfcb9853a256c81cdac0b0
Summary:
The rollback algorithm in WritePrepared transactions requires reading the values before the transaction start. Currently it uses the prepare_seq -1 as the snapshot sequence number for the read. This is not correct since the passed sequence number must be for a valid snapshot. The patch fixes it by passing kMaxSequenceNumber instead. This is fine since all the writes done by the aborted transaction will be skipped during the read anyway.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4851
Differential Revision: D13592773
Pulled By: maysamyabandeh
fbshipit-source-id: ff1bf92ea9909d4cccb173bdff49febc0e9eb7a2
Summary:
Current implementation of `current_over_upper_bound_` fails to take into consideration that keys might be invalid in either base iterator or delta iterator. Calling key() in such scenario will lead to assertion failure and runtime errors.
This PR addresses the bug by adding check for valid keys before calling `IsOverUpperBound()`, also added test coverage for iterate_upper_bound usage in BaseDeltaIterator
Also recommit https://github.com/facebook/rocksdb/pull/4656 (It was reverted earlier due to bugs)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4702
Differential Revision: D13146643
Pulled By: miasantreble
fbshipit-source-id: 6d136929da12d0f2e2a5cea474a8038ec5cdf1d0
Summary:
Currently transaction iterator does not apply `ReadOptions.iterate_upper_bound` when iterating. This PR attempts to fix the problem by having `BaseDeltaIterator` enforcing the upper bound check when iterator state is changed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4656
Differential Revision: D13039257
Pulled By: miasantreble
fbshipit-source-id: 909eb9f6b4597a4d80418fb139f32ec82c6ec1d1
Summary:
This adds support for writing unprepared batches based on size defined in `TransactionOptions::max_write_batch_size`. This is done by overriding methods that modify data (Put/Delete/SingleDelete/Merge) and checking first if write batch size has exceeded threshold. If so, the write batch is written to DB as an unprepared batch.
Support for Commit/Rollback for unprepared batch is added as well. This has been done by simply extending the WritePrepared Commit/Rollback logic to take care of all unprep_seq numbers either when updating prepare heap, or adding to commit map. For updating the commit map, this logic exists inside `WriteUnpreparedCommitEntryPreReleaseCallback`.
A test change was also made to have transactions unregister themselves when committing without prepare. This is because with write unprepared, there may be unprepared entries (which act similarly to prepared entries) already when a commit is done without prepare.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4104
Differential Revision: D8785717
Pulled By: lth
fbshipit-source-id: c02006e281ec1ce00f628e2a7beec0ee73096a91
Summary:
This adds support for recovering WriteUnprepared transactions through the following changes:
- The information in `RecoveredTransaction` is extended so that it can reference multiple batches.
- `MarkBeginPrepare` is extended with a bool indicating whether it is an unprepared begin, and this is passed down to `InsertRecoveredTransaction` to indicate whether the current transaction is prepared or not.
- `WriteUnpreparedTxnDB::Initialize` is overridden so that it will rollback unprepared transactions from the recovered transactions. This can be done without updating the prepare heap/commit map, because this is before the DB has finished initializing, and after writing the rollback batch, those data structures should not contain information about the rolled back transaction anyway.
Commit/Rollback of live transactions is still unimplemented and will come later.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4078
Differential Revision: D8703382
Pulled By: lth
fbshipit-source-id: 7e0aada6c23bd39299f1f20d6c060492e0e6b60a
Summary:
Rollback was disabled in stress test since there was a concurrency issue in WritePrepared rollback algorithm. The issue is fixed by caching the column family handles in WritePrepared to skip getting them from the db when needed for rollback.
Tested by running transaction stress test under tsan.
Closes https://github.com/facebook/rocksdb/pull/3785
Differential Revision: D7793727
Pulled By: maysamyabandeh
fbshipit-source-id: d81ab6fda0e53186ca69944cfe0712ce4869451e
Summary:
Currently WritePrepared rolls back a transaction with prepare sequence number prepare_seq by i) write a single rollback batch with rollback_seq, ii) add <rollback_seq, rollback_seq> to commit cache, iii) remove prepare_seq from PrepareHeap.
This is correct assuming that there is no snapshot taken when a transaction is rolled back. This is the case the way MySQL does rollback which is after recovery. Otherwise if max_evicted_seq advances the prepare_seq, the live snapshot might assume data as committed since it does not find them in CommitCache.
The change is to simply add <prepare_seq. rollback_seq> to commit cache before removing prepare_seq from PrepareHeap. In this way if max_evicted_seq advances prpeare_seq, the existing mechanism that we have to check evicted entries against live snapshots will make sure that the live snapshot will not see the data of rolled back transaction.
Closes https://github.com/facebook/rocksdb/pull/3745
Differential Revision: D7696193
Pulled By: maysamyabandeh
fbshipit-source-id: c9a2d46341ddc03554dded1303520a1cab74ef9c
Summary:
This PR comments out the rest of the unused arguments which allow us to turn on the -Wunused-parameter flag. This is the second part of a codemod relating to https://github.com/facebook/rocksdb/pull/3557.
Closes https://github.com/facebook/rocksdb/pull/3662
Differential Revision: D7426121
Pulled By: Dayvedde
fbshipit-source-id: 223994923b42bd4953eb016a0129e47560f7e352
Summary:
This is a hack as temporary fix of MyRocks with rollbacking the merge operands. The way MyRocks uses merge operands is without protection of locks, which violates the assumption behind the rollback algorithm. They are ok with not being rolled back as it would just create a gap in the autoincrement column. The hack add an option to disable the rollback of merge operands by default and only enables it to let the unit test pass.
Closes https://github.com/facebook/rocksdb/pull/3711
Differential Revision: D7597177
Pulled By: maysamyabandeh
fbshipit-source-id: 544be0f666c7e7abb7f651ec8b23124e05056728
Summary:
We introduced smallest_prep optimization in this commit b225de7e10, which enables storing the smallest uncommitted sequence number along with the snapshot. This enables the readers that read from the snapshot to skip further checks and safely assumed the data is committed if its sequence number is less than smallest uncommitted when the snapshot was taken. The problem was that smallest uncommitted and the snapshot must be taken atomically, and the lack of atomicity had led to readers using a smallest uncommitted after the snapshot was taken and hence mistakenly skipping some data.
This patch fixes the problem by i) separating the process of removing of prepare entries from the AddCommitted function, ii) removing the prepare entires AFTER the committed sequence number is published, iii) getting smallest uncommitted (from the prepare list) BEFORE taking a snapshot. This guarantees that the smallest uncommitted that is accompanied with a snapshot is less than or equal of such number if it was obtained atomically.
Tested by running MySQLStyleTransactionTest/MySQLStyleTransactionTest.TransactionStressTest that was failing sporadically.
Closes https://github.com/facebook/rocksdb/pull/3703
Differential Revision: D7581934
Pulled By: maysamyabandeh
fbshipit-source-id: dc9d6f4fb477eba75d4d5927326905b548a96a32
Summary:
The is an optimization to reduce lookup in the CommitCache when querying IsInSnapshot. The optimization takes the smallest uncommitted data at the time that the snapshot was taken and if the sequence number of the read data is lower than that number it assumes the data as committed.
To implement this optimization two changes are required: i) The AddPrepared function must be called sequentially to avoid out of order insertion in the PrepareHeap (otherwise the top of the heap does not indicate the smallest prepare in future too), ii) non-2PC transactions also call AddPrepared if they do not commit in one step.
Closes https://github.com/facebook/rocksdb/pull/3649
Differential Revision: D7388630
Pulled By: maysamyabandeh
fbshipit-source-id: b79506238c17467d590763582960d4d90181c600
Summary:
Currently AddPrepared is performed only on the first sub-batch if there are duplicate keys in the write batch. This could cause a problem if the transaction takes too long to commit and the seq number of the first sub-patch moved to old_prepared_ but not the seq of the later ones. The patch fixes this by calling AddPrepared for all sub-patches.
Closes https://github.com/facebook/rocksdb/pull/3651
Differential Revision: D7388635
Pulled By: maysamyabandeh
fbshipit-source-id: 0ccd80c150d9bc42fe955e49ddb9d7ca353067b4
Summary:
This commit fixes a race condition on calling SetLastPublishedSequence. The function must be called only from the 2nd write queue when two_write_queues is enabled. However there was a bug that would also call it from the main write queue if CommitTimeWriteBatch is provided to the commit request and yet use_only_the_last_commit_time_batch_for_recovery optimization is not enabled. To fix that we penalize the commit request in such cases by doing an additional write solely to publish the seq number from the 2nd queue.
Closes https://github.com/facebook/rocksdb/pull/3641
Differential Revision: D7361508
Pulled By: maysamyabandeh
fbshipit-source-id: bf8f7a27e5cccf5425dccbce25eb0032e8e5a4d7
Summary:
Make use of the index in WriteBatchWithIndex to also count the number of sub-batches. This eliminates the need to separately scan the batch to count the number of sub-batches once a duplicate key is detected.
Closes https://github.com/facebook/rocksdb/pull/3529
Differential Revision: D7049947
Pulled By: maysamyabandeh
fbshipit-source-id: 81cbf12c4e662541c772c7265a8f91631e25c7cd
Summary:
Under a certain sequence of accessing PreparedHeap, there was a bug that would not successfully empty the heap. This would result in performance issues when the heap content is moved to old_prepared_ after max_evicted_seq_ advances the orphan prepared sequence numbers. The patch fixed the bug and add more unit tests. It also does more logging when the unlikely scenarios are faced
Closes https://github.com/facebook/rocksdb/pull/3526
Differential Revision: D7038486
Pulled By: maysamyabandeh
fbshipit-source-id: f1e40bea558f67b03d2a29131fcb8734c65fce97
Summary:
These are optimization that we applied to improve sysbech's update_noindex performance.
1. Make use of LIKELY compiler hint
2. Move std::atomic so the subclass
3. Make use of skip_prepared in non-2pc transactions.
Closes https://github.com/facebook/rocksdb/pull/3512
Differential Revision: D7000075
Pulled By: maysamyabandeh
fbshipit-source-id: 1ab8292584df1f6305a4992973fb1b7933632181
Yanqin Jin