Summary:
Add the flag --prefix to the sst_dump tool
This flag is similar to, and exclusive from, the --from flag.
--prefix=0x00FF will return all rows prefixed with 0x00FF.
The --to flag may also be specified and will work as expected.
These changes were used to help in debugging the power cycle corruption issue and theses changes were tested by scanning through a udb.
Closes https://github.com/facebook/rocksdb/pull/1984
Differential Revision: D4691814
Pulled By: reidHoruff
fbshipit-source-id: 027f261
Summary:
?tion
Add flags in db_bench to test with block cache mid-point insertion.
Also update sst_dump to dump total block sizes of each type. I find it
useful to look at these test db stats and I don't know if we have them
elsewhere.
Closes https://github.com/facebook/rocksdb/pull/1706
Differential Revision: D4355812
Pulled By: yiwu-arbug
fbshipit-source-id: 3e4a348
Summary:
Include a dump of user_collected_properties in sst_dump
Closes https://github.com/facebook/rocksdb/pull/1668
Differential Revision: D4325078
Pulled By: IslamAbdelRahman
fbshipit-source-id: 226b6d6
Summary:
enhancing sst_dump to be able to parse internal key
Closes https://github.com/facebook/rocksdb/pull/1482
Differential Revision: D4154175
Pulled By: siying
fbshipit-source-id: b0e28b1
Summary:
ZSTD 1.0.0 is coming. We can finally add a support of ZSTD without worrying about compatibility.
Still keep ZSTDNotFinal for compatibility reason.
Test Plan: Run all tests. Run db_bench with ZSTD version with RocksDB built with ZSTD 1.0 and older.
Reviewers: andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: cyan, igor, IslamAbdelRahman, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63141
Summary: There's no reference to ImmutableCFOptions elsewhere in /include/rocksdb. ImmutableCFOptions was introduced in this commit (5665e5e285) but later its reference in /include/rocksdb/table.h is removed.
Test Plan:
make all check
Reviewers: IslamAbdelRahman, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: yhchiang, andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63177
* Added new statistics and refactored to allow ioptions to be passed around as required to access environment and statistics pointers (and, as a convenient side effect, info_log pointer).
* Prevent incrementing compression counter when compression is turned off in options.
* Prevent incrementing compression counter when compression is turned off in options.
* Added two more supported compression types to test code in db_test.cc
* Prevent incrementing compression counter when compression is turned off in options.
* Added new StatsLevel that excludes compression timing.
* Fixed casting error in coding.h
* Fixed CompressionStatsTest for new StatsLevel.
* Removed unused variable that was breaking the Linux build
Summary:
A couple of notes from the diff:
- The namespace block I added at the top of table_properties_collector.cc was in reaction to an issue i was having with PutVarint64 and reusing the "val" string. I'm not sure this is the cleanest way of doing this, but abstracting this out at least results in the correct behavior.
- I chose "rocksdb.merge.operands" as the property name. I am open to suggestions for better names.
- The change to sst_dump_tool.cc seems a bit inelegant to me. Is there a better way to do the if-else block?
Test Plan:
I added a test case in table_properties_collector_test.cc. It adds two merge operands and checks to make sure that both of them are reflected by GetMergeOperands. It also checks to make sure the wasPropertyPresent bool is properly set in the method.
Running both of these tests should pass:
./table_properties_collector_test
./sst_dump_test
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58119
Summary:
This is needed so that rocksdb users can add more
commands to the included ldb tool by adding more custom
commands.
Test Plan: make -j ldb
Reviewers: sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57243
Summary:
This adds a new metablock containing a shared dictionary that is used
to compress all data blocks in the SST file. The size of the shared dictionary
is configurable in CompressionOptions and defaults to 0. It's currently only
used for zlib/lz4/lz4hc, but the block will be stored in the SST regardless of
the compression type if the user chooses a nonzero dictionary size.
During compaction, computes the dictionary by randomly sampling the first
output file in each subcompaction. It pre-computes the intervals to sample
by assuming the output file will have the maximum allowable length. In case
the file is smaller, some of the pre-computed sampling intervals can be beyond
end-of-file, in which case we skip over those samples and the dictionary will
be a bit smaller. After the dictionary is generated using the first file in a
subcompaction, it is loaded into the compression library before writing each
block in each subsequent file of that subcompaction.
On the read path, gets the dictionary from the metablock, if it exists. Then,
loads that dictionary into the compression library before reading each block.
Test Plan: new unit test
Reviewers: yhchiang, IslamAbdelRahman, cyan, sdong
Reviewed By: sdong
Subscribers: andrewkr, yoshinorim, kradhakrishnan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52287
Comparable with Snappy on comp ratio.
Implemented using Windows API, does not require external package.
Avaiable since Windows 8 and server 2012.
Use -DXPRESS=1 with CMake to enable.
Summary:
Current Message
```
sst_dump [--command=check|scan|none|raw] [--verify_checksum] --file=data_dir_OR_sst_file [--output_hex] [--input_key_hex] [--from=<user_key>] [--to=<user_key>] [--read_num=NUM] [--show_properties] [--show_compression_sizes] [--show_compression_sizes [--set_block_size=<block_size>]]
```
New message
```
sst_dump --file=<data_dir_OR_sst_file> [--command=check|scan|raw]
--file=<data_dir_OR_sst_file>
Path to SST file or directory containing SST files
--command=check|scan|raw
check: Iterate over entries in files but dont print anything except if an error is encounterd (default command)
scan: Iterate over entries in files and print them to screen
raw: Dump all the table contents to <file_name>_dump.txt
--output_hex
Can be combined with scan command to print the keys and values in Hex
--from=<user_key>
Key to start reading from when executing check|scan
--to=<user_key>
Key to stop reading at when executing check|scan
--read_num=<num>
Maximum number of entries to read when executing check|scan
--verify_checksum
Verify file checksum when executing check|scan
--input_key_hex
Can be combined with --from and --to to indicate that these values are encoded in Hex
--show_properties
Print table properties after iterating over the file
--show_compression_sizes
Independent command that will recreate the SST file using 16K block size with different
compressions and report the size of the file using such compression
--set_block_size=<block_size>
Can be combined with --show_compression_sizes to set the block size that will be used
when trying different compression algorithms
```
Test Plan: none
Reviewers: yhchiang, andrewkr, kradhakrishnan, yiwu, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56325
Summary:
Added the column family name to the properties block. This property
is omitted only if the property is unavailable, such as when RepairDB()
writes SST files.
In a next diff, I will change RepairDB to use this new property for
deciding to which column family an existing SST file belongs. If this
property is missing, it will add it to the "unknown" column family (same
as its existing behavior).
Test Plan:
New unit test:
$ ./db_table_properties_test --gtest_filter=DBTablePropertiesTest.GetColumnFamilyNameProperty
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55605
Summary:
Undefined Behavior Sanitizer (ubsan) is //a good thing// which will help us to find sneaky bugs with low cost. Please see http://developerblog.redhat.com/2014/10/16/gcc-undefined-behavior-sanitizer-ubsan/ for more details and official GCC documentation for more context: https://gcc.gnu.org/onlinedocs/gcc/Instrumentation-Options.html.
Changes itself are quite simple and pretty much imitating whatever is implemented for ASan.
Hooking the UBsan validation build to Sandcastle is a separate step and will be dealt as separate diff because code is in internal repository.
Test Plan: Make sure that that there no regressions when it comes to builds and test pass rate.
Reviewers: leveldb, sdong, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56049
Summary:
util/testutil.h doesn't seem to be used in tools/sst_dump_tool_imp.h. Remove it.
Also move some other include to tools/sst_dump_tool.cc instead.
Test Plan: Build with GCC, CLANG and with GCC 4.81 and 4.9.
Reviewers: yuslepukhin, yhchiang, rven, anthony, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52791
Summary:
When Get() or NewIterator() trigger file loads, skip caching the filter block if
(1) optimize_filters_for_hits is set and (2) the file is on the bottommost
level. Also skip checking filters under the same conditions, which means that
for a preloaded file or a file that was trivially-moved to the bottom level, its
filter block will eventually expire from the cache.
- added parameters/instance variables in various places in order to propagate the config ("skip_filters") from version_set to block_based_table_reader
- in BlockBasedTable::Rep, this optimization prevents filter from being loaded when the file is opened simply by setting filter_policy = nullptr
- in BlockBasedTable::Get/BlockBasedTable::NewIterator, this optimization prevents filter from being used (even if it was loaded already) by setting filter = nullptr
Test Plan:
updated unit test:
$ ./db_test --gtest_filter=DBTest.OptimizeFiltersForHits
will also run 'make check'
Reviewers: sdong, igor, paultuckfield, anthony, rven, kradhakrishnan, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D51633
Summary: As part of cleaning up dependencies for tech debt week, we are moving ldb and sst_dump tools from util to tools, since they are tools.
Test Plan: make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48747
Summary:
Separate a new class InternalIterator from class Iterator, when the look-up is done internally, which also means they operate on key with sequence ID and type.
This change will enable potential future optimizations but for now InternalIterator's functions are still the same as Iterator's.
At the same time, separate the cleanup function to a separate class and let both of InternalIterator and Iterator inherit from it.
Test Plan: Run all existing tests.
Reviewers: igor, yhchiang, anthony, kradhakrishnan, IslamAbdelRahman, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48549
Summary: Pass column family ID through TablePropertiesCollectorFactory::CreateTablePropertiesCollector() so that users can identify which column family this file is for and handle it differently.
Test Plan: Add unit test scenarios in tests related to table properties collectors to verify the information passed in is correct.
Reviewers: rven, yhchiang, anthony, kradhakrishnan, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48411
Summary:
Fix hex2String performance issues by removing sscanf dependency.
Also fixed some edge case handling (odd length, bad input).
Test Plan: Created a test file which called old and new implementation, and validated results are the same. I'll paste results in the phabricator diff.
Reviewers: igor, rven, anthony, IslamAbdelRahman, kradhakrishnan, yhchiang, sdong
Reviewed By: sdong
Subscribers: thatsafunnyname, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D46785
Summary:
Refactoring NewTableReader to accept TableReaderOptions
This will make it easier to add new options in the future, for example in this diff https://reviews.facebook.net/D46071
Test Plan: run existing tests
Reviewers: igor, yhchiang, anthony, rven, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D46179
Summary:
Fixed the following compile warning in linux32 environment.
==> linux32: util/sst_dump_tool.cc: In member function ‘int
rocksdb::SstFileReader::ShowAllCompressionSizes(size_t)’:
==> linux32: util/sst_dump_tool.cc:167:50: warning: format ‘%lu’ expects
argument of type ‘long unsigned int’, but argument 3 has type
‘size_t {aka unsigned int}’ [-Wformat=]
==> linux32: fprintf(stdout, "Block Size: %lu\n", block_size);
Test Plan: make sst_dump
Reviewers: anthony, IslamAbdelRahman, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45885
Summary: Add ZSTD compression type. The same way as adding LZ4.
Test Plan: run all tests. Generate files in db_bench. Make sure reads succeed. But the SST files cannot be opened in older versions. Also some other adhoc tests.
Reviewers: rven, anthony, IslamAbdelRahman, kradhakrishnan, igor
Reviewed By: igor
Subscribers: MarkCallaghan, maykov, yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D45747
Summary: So I took a look and I used a pointer to TableBuilder. Changed it to a unique_ptr. I think this should work, but I cannot run valgrind correctly on my local machine to test it.
Test Plan: Run valgrind, but it's not working locally. It says I'm executing an unrecognized instruction.
Reviewers: yhchiang
Subscribers: dhruba, sdong
Differential Revision: https://reviews.facebook.net/D43485
Summary: In "sst_dump --show_compression_sizes", a reference of CompressionOptions is kept in TableBuilderOptions, which is destroyed later, causing a memory issue.
Test Plan: Run valgrind against SSTDumpToolTest.CompressedSizes and make sure it is fixed
Reviewers: IslamAbdelRahman, yhchiang, kradhakrishnan, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43497
Summary:
sst_dump_tool contains two instances of `fprintf`s where the `format` argument is not
a string literal. This prevents the code from compiling with some compilers/compiler
options because of the potential security risks associated with printing non-literals.
Test Plan: make all
Reviewers: rven, igor, yhchiang, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43305
Summary:
Added a new feature to sst_dump_tool.cc to allow a user to see the sizes of the different compression algorithms on an .sst file.
Usage:
./sst_dump --file=<filename> --show_compression_sizes
./sst_dump --file=<filename> --show_compression_sizes --set_block_size=<block_size>
Note: If you do not set a block size, it will default to 16kb
Test Plan: manual test and the write a unit test
Reviewers: IslamAbdelRahman, anthony, yhchiang, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D42963
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.
Test Plan: Run all existing unit tests.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42321
Summary:
Based on feedback from D37083.
Are all of these correct? In some spaces it seems like we're doing SetMaxPossibleForUserKey() although we want the smallest possible internal key for user key.
Test Plan: make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37341
Summary:
Limiting verbose printing to "command=scan"
Test Plan:
Run make check and manual testing of sst_dump_test
Reviewers: sdong
CC: leveldb
Task ID: #6575982
Blame Rev:
Summary:
BlockBasedTable pre-fetches the filter and index blocks on Open call.
This is an optimistic optimization targeted for runtime scenario. The
optimization is unnecessary for sst_dump_tool
- Added a provision to disable pre-fetching of index and filter blocks
in BlockBasedTable
- Disabled pre-fetching for the sst_dump tool
Stack for reference :
#01 0x00000000005ed944 in snappy::InternalUncompress<snappy::SnappyArrayWriter> () from /home/engshare/third-party2/snappy/1.0.3/src/snappy-1.0.3/snappy.cc:148
#02 0x00000000005edeee in snappy::RawUncompress () from /home/engshare/third-party2/snappy/1.0.3/src/snappy-1.0.3/snappy.cc:947
#03 0x00000000004e0b4d in rocksdb::UncompressBlockContents () from /data/users/paultuckfield/rocksdb/./util/compression.h:69
#04 0x00000000004e145c in rocksdb::ReadBlockContents () from /data/users/paultuckfield/rocksdb/table/format.cc:334
#05 0x00000000004ca424 in rocksdb::(anonymous namespace)::ReadBlockFromFile () from /data/users/paultuckfield/rocksdb/table/block_based_table_reader.cc:70
#06 0x00000000004cccad in rocksdb::BlockBasedTable::CreateIndexReader () from /data/users/paultuckfield/rocksdb/table/block_based_table_reader.cc:173
#07 0x00000000004d17e5 in rocksdb::BlockBasedTable::Open () from /data/users/paultuckfield/rocksdb/table/block_based_table_reader.cc:553
#08 0x00000000004c8184 in rocksdb::BlockBasedTableFactory::NewTableReader () from /data/users/paultuckfield/rocksdb/table/block_based_table_factory.cc:51
#09 0x0000000000598463 in rocksdb::SstFileReader::NewTableReader () from /data/users/paultuckfield/rocksdb/util/sst_dump_tool.cc:69
#10 0x00000000005986c2 in rocksdb::SstFileReader::SstFileReader () from /data/users/paultuckfield/rocksdb/util/sst_dump_tool.cc:26
#11 0x0000000000599047 in rocksdb::SSTDumpTool::Run () from /data/users/paultuckfield/rocksdb/util/sst_dump_tool.cc:332
#12 0x0000000000409b06 in main () from /data/users/paultuckfield/rocksdb/tools/sst_dump.cc:12
Test Plan:
- Added a unit test to trigger the code.
- Also did some manual verification.
- Passed all unit tests
task #6296048
Reviewers: igor, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34041
Summary:
Priliminary diff to solicit comments.
Given DB path, dump all SST files (key/value and properties), WAL file and manifest
files. What command options do we need to support for this command? Maybe
output_hex for keys?
Test Plan: Create additional ldb unit tests.
Reviewers: sdong, rven
Reviewed By: rven
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D29547
Summary:
Make db_stress built for ROCKSDB_LITE.
The test doesn't pass tough. It seg fault quickly. But I took a look and it doesn't seem to be related to lite version. Likely to be a bug inside RocksDB.
Test Plan: make db_stress
Reviewers: yhchiang, rven, ljin, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D28797
Summary: So iOS size_t is 32-bit, so we need to static_cast<size_t> any uint64_t :(
Test Plan: TARGET_OS=IOS make static_lib
Reviewers: dhruba, ljin, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28743
Summary:
Refactor sst_dump to follow the same structure as ldb. Introduce a
SSTDump interface.
Test Plan: built sst_dump and tried it manually.
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28485
Summary: Previously I made `make check` work with -Wshadow, but there are some tools that are not compiled using `make check`.
Test Plan: make all
Reviewers: yhchiang, rven, ljin, sdong
Reviewed By: ljin, sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28497
Summary: Fix lint errors and coding style of ldb related codes.
Test Plan: ./ldb
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28125
Summary:
As a preparation to support updating some options dynamically, I'd like
to first introduce ImmutableOptions, which is a subset of Options that
cannot be changed during the course of a DB lifetime without restart.
ColumnFamily will keep both Options and ImmutableOptions. Any component
below ColumnFamily should only take ImmutableOptions in their
constructor. Other options should be taken from APIs, which will be
allowed to adjust dynamically.
I am yet to make changes to memtable and other related classes to take
ImmutableOptions in their ctor. That can be done in a seprate diff as
this one is already pretty big.
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D22545
Summary:
1. fix segment error when dumping old sst format (no properties nor stats)
2. Enable dumpping old sst format
Test Plan:
Generate block based sst file with "properties", and one with "stats" and one without neither.
Read it using sst_dump
Reviewers: ljin, igor, yhchiang, dhruba, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21837
Summary:
Since we have a lot of options for PlainTable, add a struct PlainTableOptions
to manage them
Test Plan: make all check
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20175
Summary:
Seems like NewTotalOrderPlainTableFactory is useless and is semantically incorrect.
Total order mode indicator is prefix_extractor == nullptr,
but NewTotalOrderPlainTableFactory doesn't set it to be nullptr. That's why some tests
in plain_table_db_tests is incorrect.
Test Plan: make all check
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19587
Reid Horuff