Summary:
We don't want two threads to clash if they concurrently call DisableFileDeletions() and EnableFileDeletions(). I'm adding a counter that will enable file deletions only after all DisableFileDeletions() calls have been negated with EnableFileDeletions().
However, we also don't want to break the old behavior, so I added a parameter force to EnableFileDeletions(). If force is true, we will still enable file deletions after every call to EnableFileDeletions(), which is what is happening now.
Test Plan: make check
Reviewers: dhruba, haobo, sanketh
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14781
Summary: I'm not sure what's the purpose of encoding file number to a new buffer for looking up the table cache. It seems to be unnecessary to me. With this patch, we point the lookup key to the address of the int64 of the file number.
Test Plan: make all check
Reviewers: dhruba, haobo, igor, kailiu
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14811
Summary:
In some places we have NotFound status created with empty message, but it doesn't avoid a malloc. With this patch, the malloc is avoided for that case.
The motivation of it is that I found in db_bench readrandom test when all keys are not existing, about 4% of the total running time is spent on malloc of Status, plus a similar amount of CPU spent on free of them, which is not necessary.
Test Plan: make all check
Reviewers: dhruba, haobo, igor
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14691
Summary:
Instead of locking and saving a DB state, we can cache a DB state and update it only when it changes. This change reduces lock contention and speeds up read operations on the DB.
Performance improvements are substantial, although there is some cost in no-read workloads. I ran the regression tests on my devserver and here are the numbers:
overwrite 56345 -> 63001
fillseq 193730 -> 185296
readrandom 771301 -> 1219803 (58% improvement!)
readrandom_smallblockcache 677609 -> 862850
readrandom_memtable_sst 710440 -> 1109223
readrandom_fillunique_random 221589 -> 247869
memtablefillrandom 105286 -> 92643
memtablereadrandom 763033 -> 1288862
Test Plan:
make asan_check
I am also running db_stress
Reviewers: dhruba, haobo, sdong, kailiu
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14679
Summary:
For some tests I want to cache the database prior to running other tests on the same invocation
of db_bench. The readtocache test ignores --threads and --reads so those can be used by other tests
and it will still do a full read of --num rows with one thread. It might be invoked like:
db_bench --benchmarks=readtocache,readrandom --reads 100 --num 10000 --threads 8
Task ID: #
Blame Rev:
Test Plan:
run db_bench
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14739
Summary: I realized that "D14409 Avoid sorting in Version::Get() by presorting them in VersionSet::Builder::SaveTo()" is not done in an optimized place. SaveTo() is usually inside mutex. Move it to Finalize(), which is called out of mutex.
Test Plan: make all check
Reviewers: dhruba, haobo, kailiu
Reviewed By: dhruba
CC: igor, leveldb
Differential Revision: https://reviews.facebook.net/D14607
Summary: It seems to be a decision tradeoff in current codes: we make a malloc for every Get() to reduce one malloc for a flush inside mutex. It takes about 5% of CPU time in readrandom tests. We might consider the tradeoff to be the other way around.
Test Plan: make all check
Reviewers: dhruba, haobo, igor
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14697
Summary: In get operations, merge_operands is only used in few cases. Lazily initialize it can reduce average latency in some cases
Test Plan: make all check
Reviewers: haobo, kailiu, dhruba
Reviewed By: haobo
CC: igor, nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D14415
Conflicts:
db/db_impl.cc
db/memtable.cc
Summary: Pre-sort files in VersionSet::Builder::SaveTo() so that when getting the value, no need to sort them. It can avoid the costs of vector operations and sorting in Version::Get().
Test Plan: make all check
Reviewers: haobo, kailiu, dhruba
Reviewed By: dhruba
CC: nkg-, igor, leveldb
Differential Revision: https://reviews.facebook.net/D14409
Summary:
creating new iterators of mem tables can be expensive. Move them out of mutex.
DBImpl::WriteLevel0Table()'s mems seems to be a local vector and is only used by flushing. memtables to flush are also immutable, so it should be safe to do so.
Test Plan: make all check
Reviewers: haobo, dhruba, kailiu
Reviewed By: dhruba
CC: igor, leveldb
Differential Revision: https://reviews.facebook.net/D14577
Conflicts:
db/db_impl.cc
Summary: So fflush() takes a lock which is heavyweight. I added flush_pending_, but more importantly, I removed LogFlush() from foreground threads.
Test Plan: ./db_test
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14535
Summary:
In this diff I present you BackupableDB v1. You can easily use it to backup your DB and it will do incremental snapshots for you.
Let's first describe how you would use BackupableDB. It's inheriting StackableDB interface so you can easily construct it with your DB object -- it will add a method RollTheSnapshot() to the DB object. When you call RollTheSnapshot(), current snapshot of the DB will be stored in the backup dir. To restore, you can just call RestoreDBFromBackup() on a BackupableDB (which is a static method) and it will restore all files from the backup dir. In the next version, it will even support automatic backuping every X minutes.
There are multiple things you can configure:
1. backup_env and db_env can be different, which is awesome because then you can easily backup to HDFS or wherever you feel like.
2. sync - if true, it *guarantees* backup consistency on machine reboot
3. number of snapshots to keep - this will keep last N snapshots around if you want, for some reason, be able to restore from an earlier snapshot. All the backuping is done in incremental fashion - if we already have 00010.sst, we will not copy it again. *IMPORTANT* -- This is based on assumption that 00010.sst never changes - two files named 00010.sst from the same DB will always be exactly the same. Is this true? I always copy manifest, current and log files.
4. You can decide if you want to flush the memtables before you backup, or you're fine with backing up the log files -- either way, you get a complete and consistent view of the database at a time of backup.
5. More things you can find in BackupableDBOptions
Here is the directory structure I use:
backup_dir/CURRENT_SNAPSHOT - just 4 bytes holding the latest snapshot
0, 1, 2, ... - files containing serialized version of each snapshot - containing a list of files
files/*.sst - sst files shared between snapshots - if one snapshot references 00010.sst and another one needs to backup it from the DB, it will just reference the same file
files/ 0/, 1/, 2/, ... - snapshot directories containing private snapshot files - current, manifest and log files
All the files are ref counted and deleted immediatelly when they get out of scope.
Some other stuff in this diff:
1. Added GetEnv() method to the DB. Discussed with @haobo and we agreed that it seems right thing to do.
2. Fixed StackableDB interface. The way it was set up before, I was not able to implement BackupableDB.
Test Plan:
I have a unittest, but please don't look at this yet. I just hacked it up to help me with debugging. I will write a lot of good tests and update the diff.
Also, `make asan_check`
Reviewers: dhruba, haobo, emayanke
Reviewed By: dhruba
CC: leveldb, haobo
Differential Revision: https://reviews.facebook.net/D14295
Summary: As title
Test Plan: make clean and make
Reviewers: igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14469
Summary: This would enable rocksdb users to get the db identity without depending on implementation details(storing that in IDENTITY file)
Test Plan: db/db_test (has identity checks)
Reviewers: dhruba, haobo, igor, kailiu
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14463
Summary:
This adds 2 options for compression to db_bench:
* universal_compression_size_percent
* compression_level - to set zlib compression level
It also logs compression_size_percent at startup in LOG
Task ID: #
Blame Rev:
Test Plan:
make check, run db_bench
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14439
Summary:
Let's get rid of TransformRep and it's children. We have confirmed that HashSkipListRep works better with multifeed, so there is no benefit to keeping this around.
This diff is mostly just deleting references to obsoleted functions. I also have a diff for fbcode that we'll need to push when we switch to new release.
I had to expose HashSkipListRepFactory in the client header files because db_impl.cc needs access to GetTransform() function for SanitizeOptions.
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14397
Summary:
I went through all remaining shared_ptrs and removed the ones that I found not-necessary. Only GenerateCachePrefix() is called fairly often, so don't expect much perf wins.
The ones that are left are accessed infrequently and I think we're fine with keeping them.
Test Plan: make asan_check
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14427
Summary:
The commit at 27bbef1180 had a memory leak
that was detected by valgrind. The memtable that has a refcount decrement
in MemTableList::InstallMemtableFlushResults was not freed.
Test Plan: valgrind ./db_test --leak-check=full
Reviewers: igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14391
Summary: These tests fail if compression libraries are not installed.
Test Plan: Manually disabled snappy, observed tests not ran.
Reviewers: dhruba, kailiu
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14379
Summary:
This code path can potentially accumulate multiple important_files for level 0.
But for other levels, it should have only one file in the
important_files, so it is ok not to reserve excessive space, is it not?
Test Plan: make check
Reviewers: haobo
Reviewed By: haobo
CC: reconnect.grayhat, leveldb
Differential Revision: https://reviews.facebook.net/D14349
Summary:
Large memory allocations and frees are costly and best done outside the
db-mutex. The memtables are already allocated outside the db-mutex but
they were being freed while holding the db-mutex.
This patch frees obsolete memtables outside the db-mutex.
Test Plan:
make check
db_stress
Unit tests pass, I am in the process of running stress tests.
Reviewers: haobo, igor, emayanke
Reviewed By: haobo
CC: reconnect.grayhat, leveldb
Differential Revision: https://reviews.facebook.net/D14319
Summary: We need access to options for BackupableDB
Test Plan: make check
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb, reconnect.grayhat
Differential Revision: https://reviews.facebook.net/D14331
Summary: This is part of https://reviews.facebook.net/D14295 -- smaller diff that is easier to review
Test Plan: make asan_check
Reviewers: dhruba, haobo, emayanke
Reviewed By: emayanke
CC: leveldb, kailiu, reconnect.grayhat
Differential Revision: https://reviews.facebook.net/D14301
Summary:
All filesystem Io should be done outside the dbmutex. There was one place
when we have to roll the transaction log that we were creating the new log file
while holding the dbmutex.
I rearranged this code so that the act of creating the new transaction log
file is done without holding the dbmutex. I also allocate the new memtable
outside the dbmutex, this is important because creating the memtable
could be heavyweight.
Test Plan: make check and dbstress
Reviewers: haobo, igor
Reviewed By: haobo
CC: leveldb, reconnect.grayhat
Differential Revision: https://reviews.facebook.net/D14283
Summary: liveness of the statistics object is already ensured by the shared pointer in DB options. There's no reason to pass again shared pointer among internal functions. Raw pointer is sufficient and efficient.
Test Plan: make check
Reviewers: dhruba, MarkCallaghan, igor
Reviewed By: dhruba
CC: leveldb, reconnect.grayhat
Differential Revision: https://reviews.facebook.net/D14289
Summary:
Provide a framework to profile a query in detail to figure out latency bottleneck. Currently, in Get(), Put() and iterators, 2-3 simple timing is used. We can easily add more profile counters to the framework later.
Test Plan: Enable this profiling in seveal existing tests.
Reviewers: haobo, dhruba, kailiu, emayanke, vamsi, igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14001
Summary: user comparator needs to work if either input is prefix only.
Test Plan: ./prefix_test --write_buffer_size=100000 --total_prefixes=10000 --items_per_prefix=10
Reviewers: dhruba, igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14241
Summary:
Previously we introduce a `flush_block_policy_factory` in Options, however, that options is strongly releated to Table based tables.
It will make more sense to move it to block based table's own factory class.
Test Plan: make check to pass existing tests
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14211
Summary:
The primary motivation of the changes is to make it easier to figure out the inside of the tables.
* rename "table stats" to "table properties" since now we have more than "integers" to store in the property block.
* Add filter block size to the basic table properties.
* Whenever a table is built, we'll log the table properties (the sample output is in Test Plan).
* Make an api to expose deleted keys.
Test Plan:
Passed all existing test. and the sample output of table stats:
==================================================================
Basic Properties
------------------------------------------------------------------
# data blocks: 1
# entries: 1
raw key size: 9
raw average key size: 9
raw value size: 9
raw average value size: 0
data block size: 25
index block size: 27
filter block size: 18
(estimated) table size: 70
filter policy: rocksdb.BuiltinBloomFilter
==================================================================
User collected properties: InternalKeyPropertiesCollector
------------------------------------------------------------------
kDeletedKeys: 1
==================================================================
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14187
Summary: This is the only compile issue in Ubuntu. It might be better to include <unistd.h> only in env_posix and add Truncate function to Env, but since we use truncate only in db_test, I don't think it makes much sense.
Test Plan: Rocksdb now compiles on Ubuntu!
Reviewers: dhruba, kailiu
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14127
Summary:
Finally did it - the trick was in using --dynamic-linker option. This is first step to running ASAN.
All of our code seems to compile just fine on 4.8.1. However, I still left fbcode.471.sh in the 'build_tools/' just in case.
Test Plan: make clean; make
Reviewers: dhruba, haobo, kailiu, emayanke, sdong
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14109
Summary:
Previously in KeyMayExist(), if DB::Get() returns non-Status::OK(), we assumes key may not exist.
However, as if index block is not in block cache, Status::Incomplete() will return. Worse still, if
options::filter_delete is enabled, we may falsely ignore the "delete" operation:
https://github.com/facebook/rocksdb/blob/master/db/write_batch.cc#L217-L220
This diff fixes this bug and will let crash-test pass.
Test Plan:
Ran:
./db_stress --test_batches_snapshots=1 --ops_per_thread=1000000 --threads=32 --write_buffer_size=4194304 --destroy_db_initially=1 --reopen=0 --readpercent=5 --prefixpercent=45 --writepercent=35 --delpercent=5 --iterpercent=10 --db=/home/kailiu/local/newer --max_key=100000000 --disable_seek_compaction=0 --mmap_read=0 --block_size=16384 --cache_size=1048576 --open_files=500000 --verify_checksum=1 --sync=0 --disable_wal=0 --disable_data_sync=0 --target_file_size_base=2097152
--target_file_size_multiplier=2 --max_write_buffer_number=3 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --filter_deletes=1
Previously we'll see crash happens very soon.
Reviewers: igor, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14115
Summary: This diff invoves some more complicated issues in the posix environment.
Test Plan: works under mac os. will need to verify dev box.
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14061
Summary:
Remove all the files from the test dir before the test. The test failed when there were some old files still in the directory, since it checks the file counts.
This is what caused jenkins' test failures. It was running fine on my machine so it was hard to repro.
Test Plan:
1. create an extra 000001.log file in the test directory
2. run a ./deletefile_test - test failes
3. patch ./deletefile_test with this
4. test succeeds
Reviewers: haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14097
Summary:
Created a unittest that verifies that automatic deletion performed by PurgeObsoleteFiles() works correctly.
Also, few small fixes on the logic part -- call version_set_->GetObsoleteFiles() in FindObsoleteFiles() instead of on some arbitrary positions.
Test Plan: Created a unit test
Reviewers: dhruba, haobo, nkg-
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14079
Summary:
We iterate until we find a different key than original key.
ikey is pointing to next key when we break out of loop.
After the loop we apply all merge operands meant for original key
on the next key!
Test Plan:
Need to give a build to Marcin to test out.
Revert Plan: OK
Task ID: #3181932
Reviewers: haobo, emayanke, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14073
kailiu