Summary: Add a DB property of estimated number of live keys, by adding number of entries of all mem tables and all files, subtracted by all deletions in all files.
Test Plan: Add the case in unit tests
Reviewers: hobbymanyp, ljin
Reviewed By: ljin
Subscribers: MarkCallaghan, yoshinorim, leveldb, igor, dhruba
Differential Revision: https://reviews.facebook.net/D20631
Summary:
Use FileLevel in LevelFileNumIterator, thus use new version of findFile.
Old version of findFile function is deleted.
Write a function in version_set.cc to generate FileLevel from files_.
Add GenerateFileLevelTest in version_set_test.cc
Test Plan:
make all check
Reviewers: ljin, haobo, yhchiang, sdong
Reviewed By: sdong
Subscribers: igor, dhruba
Differential Revision: https://reviews.facebook.net/D19659
Summary:
Define CompressedFileMetaData that just contains fd, smallest_slice, largest_slice. Create compressed_levels_ in Version, the space is allocated using arena
Thus increase the file meta data locality, speed up "Get" and "FindFile"
benchmark with in-memory tmpfs, could have 4% improvement under "random read" and 2% improvement under "read while writing"
benchmark command:
./db_bench --db=/mnt/db/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --block_size=4096 --cache_size=17179869184 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --disable_wal=0 --sync=0 --disable_data_sync=1 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_grandparent_overlap_factor=10 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --perf_level=0 --benchmarks=readwhilewriting,readwhilewriting,readwhilewriting --use_existing_db=1 --num=52428800 --threads=1 —writes_per_second=81920
Read Random:
From 1.8363 ms/op, improve to 1.7587 ms/op.
Read while writing:
From 2.985 ms/op, improve to 2.924 ms/op.
Test Plan:
make all check
Reviewers: ljin, haobo, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, igor
Differential Revision: https://reviews.facebook.net/D19419
Summary:
This patch include two fixes:
1. newly created Version will now takes the aggregated stats for average-value-size from the latest Version.
2. compensated size of a file is now computed only for newly created / loaded file, this addresses the issue where files are already sorted by their compensated file size but might sometimes observe some out-of-order due to later update on compensated file size.
Test Plan:
export ROCKSDB_TESTS=CompactionDele
./db_test
Reviewers: ljin, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19557
Summary:
In this patch, we allow RocksDB to support multiple DB paths internally.
No user interface is supported yet so this patch is silent to users.
Test Plan: make all check
Reviewers: igor, haobo, ljin, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18921
Summary: files_by_size_ is sorted by time in case of universal compaction. However, Version::files_ is also sorted by time. So no need for files_by_size_
Test Plan:
1) make check with the change
2) make check with `assert(last_index == c->input_version_->files_[level].size() - 1);` in compaction picker
Reviewers: dhruba, haobo, yhchiang, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19125
Summary:
This diff allows compaction to reclaim storage more effectively.
In the current design, compactions are mainly triggered based on
the file sizes. However, since deletion entries does not have
value, files which have many deletion entries are less likely
to be compacted. As a result, it may took a while to make
deletion entries to be compacted.
This diff address issue by compensating the size of deletion
entries during compaction process: the size of each deletion
entry in the compaction process is augmented by 2x average
value size. The diff applies to both leveled and universal
compacitons.
Test Plan:
develop CompactionDeletionTrigger
make db_test
./db_test
Reviewers: haobo, igor, ljin, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19029
Summary:
As discussed in our internal group, we don't get much use of seek compaction at the moment, while it's making code more complicated and slower in some cases.
This diff removes seek compaction and (hopefully) all code that was introduced to support seek compaction.
There is one test case that relied on didIO information. I'll try to find another way to implement it.
Test Plan: make check
Reviewers: sdong, haobo, yhchiang, ljin, dhruba
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19161
Summary:
https://reviews.facebook.net/D17205 removed the logic of skipping file key range check when there are less than 3 level 0 files. This patch brings it back.
Other than that, add another small optimization to avoid to check all the levels if most higher levels don't have any file.
Test Plan: make all check
Reviewers: ljin
Reviewed By: ljin
Subscribers: yhchiang, igor, haobo, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D19035
Summary: as title
Test Plan:
db_bench
the initial result is very promising. I will post results of complete
runs
Reviewers: dhruba, haobo, sdong, igor
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D18867
Summary:
In this patch, try to allocate the whole iterator tree starting from DBIter from an arena
1. ArenaWrappedDBIter is created when serves as the entry point of an iterator tree, with an arena in it.
2. Add an option to create iterator from arena for following iterators: DBIter, MergingIterator, MemtableIterator, all mem table's iterators, all table reader's iterators and two level iterator.
3. MergeIteratorBuilder is created to incrementally build the tree of internal iterators. It is passed to mem table list and version set and add iterators to it.
Limitations:
(1) Only DB::NewIterator() without tailing uses the arena. Other cases, including readonly DB and compactions are still from malloc
(2) Two level iterator itself is allocated in arena, but not iterators inside it.
Test Plan: make all check
Reviewers: ljin, haobo
Reviewed By: haobo
Subscribers: leveldb, dhruba, yhchiang, igor
Differential Revision: https://reviews.facebook.net/D18513
Summary:
Forward iterator puts everything together in a flat structure instead of
a hierarchy of nested iterators. this should simplify the code and
provide better performance. It also enables more optimization since all
information are accessiable in one place.
Init evaluation shows about 6% improvement
Test Plan: db_test and db_bench
Reviewers: dhruba, igor, tnovak, sdong, haobo
Reviewed By: haobo
Subscribers: sdong, leveldb
Differential Revision: https://reviews.facebook.net/D18795
Summary:
Introducing new compaction style -- FIFO.
FIFO compaction style has write amplification of 1 (+1 for WAL) and it deletes the oldest files when the total DB size exceeds pre-configured values.
FIFO compaction style is suited for storing high-frequency event logs.
Test Plan: Added a unit test
Reviewers: dhruba, haobo, sdong
Reviewed By: dhruba
Subscribers: alberts, leveldb
Differential Revision: https://reviews.facebook.net/D18765
Summary:
As a follow-up diff for https://reviews.facebook.net/D17805, add
optimization to check PrefixMayMatch on Seek()
Test Plan: make all check
Reviewers: igor, haobo, sdong, yhchiang, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17853
Summary:
The file tree structure in Version is prebuilt and the range of each file is known.
On the Get() code path, we do binary search in FindFile() by comparing
target key with each file's largest key and also check the range for each L0 file.
With some pre-calculated knowledge, each key comparision that has been done can serve
as a hint to narrow down further searches:
(1) If a key falls within a L0 file's range, we can safely skip the next
file if its range does not overlap with the current one.
(2) If a key falls within a file's range in level L0 - Ln-1, we should only
need to binary search in the next level for files that overlap with the current one.
(1) will be able to skip some files depending one the key distribution.
(2) can greatly reduce the range of binary search, especially for bottom
levels, given that one file most likely only overlaps with N files from
the level below (where N is max_bytes_for_level_multiplier). So on level
L, we will only look at ~N files instead of N^L files.
Some inital results: measured with 500M key DB, when write is light (10k/s = 1.2M/s), this
improves QPS ~7% on top of blocked bloom. When write is heavier (80k/s =
9.6M/s), it gives us ~13% improvement.
Test Plan: make all check
Reviewers: haobo, igor, dhruba, sdong, yhchiang
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17205
Summary:
One of our profilings shows that Version::Get() sometimes is slow when getting pointer of user comparators or other global objects. In this patch:
(1) we keep pointers of immutable objects in Version to avoid accesses them though option objects or cfd objects
(2) table_reader is directly cached in FileMetaData so that table cache don't have to go through handle first to fetch it
(3) If level 0 has less than 3 files, skip the filtering logic based on SST tables' key range. Smallest and largest key are stored in separated memory locations, which has potential cache misses
Test Plan: make all check
Reviewers: haobo, ljin
Reviewed By: haobo
CC: igor, yhchiang, nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D17739
Summary:
Introducing RocksDBLite! Removes all the non-essential features and reduces the binary size. This effort should help our adoption on mobile.
Binary size when compiling for IOS (`TARGET_OS=IOS m static_lib`) is down to 9MB from 15MB (without stripping)
Test Plan: compiles :)
Reviewers: dhruba, haobo, ljin, sdong, yhchiang
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17835
Summary: When opening DB in read-only mode, client can choose to only specify a subset of column families ("default" column family can't be omitted, though)
Test Plan: added a unit test in column_family_test
Reviewers: haobo, sdong, ljin, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17565
Summary:
As it turns out, we need the call to ComputeCompactionScore (previously: Finalize) in CompactionPicker.
The issue caused a deadlock in db_stress: http://ci-builds.fb.com/job/rocksdb_crashtest/290/console
The last two lines before a deadlock were:
2014/03/18-22:43:41.481029 7facafbee700 (Original Log Time 2014/03/18-22:43:41.480989) Compaction nothing to do
2014/03/18-22:43:41.481041 7faccf7fc700 wait for fewer level0 files...
"Compaction nothing to do" and other thread waiting for fewer level0 files. Hm hm.
I moved the pre-sorting to SaveTo, which should fix both the original and the new issue.
Test Plan: make check for now, will run db_stress in jenkins
Reviewers: dhruba, haobo, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17037
Summary:
Finalize re-sorts (read: mutates) the files_ in Version* and it is called by CompactionPicker during normal runtime. At the same time, this same Version* lives in the SuperVersion* and is accessed without the mutex in GetImpl() code path.
Mutating the files_ in one thread and reading the same files_ in another thread is a bad idea. It caused this issue: http://ci-builds.fb.com/job/rocksdb_crashtest/285/console
Long-term, we need to be more careful with method contracts and clearly document what state can be mutated when. Now that we are much faster because we don't lock in GetImpl(), we keep running into data races that were not a problem before when we were slower. db_stress has been very helpful in detecting those.
Short-term, I removed Finalize() from CompactionPicker.
Note: I believe this is an issue in current 2.7 version running in production.
Test Plan:
make check
Will also run db_stress to see if issue is gone
Reviewers: sdong, ljin, dhruba, haobo
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16983
Summary:
When the manifest is getting rolled the following happens:
1) manifest_file_number_ is assigned to a new manifest number (even though the old one is still current)
2) mutex is unlocked
3) SetCurrentFile() creates temporary file manifest_file_number_.dbtmp
4) SetCurrentFile() renames manifest_file_number_.dbtmp to CURRENT
5) mutex is locked
If FindObsoleteFiles happens between (3) and (4) it will:
1) Delete manifest_file_number_.dbtmp (because it's not in pending_outputs_)
2) Delete old manifest (because the manifest_file_number_ already points to a new one)
I introduce the concept of prev_manifest_file_number_ that will avoid the race condition.
However, we should discuss the future of MANIFEST file rolling. We found some race conditions with it last week and who knows how many more are there. Nobody is using it in production because we don't trust the implementation. Should we even support it?
Test Plan: make check
Reviewers: ljin, dhruba, haobo, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16929
Summary: Moved LogBuffer class to an internal header. Removed some unneccesary indirection. Enabled log buffer for BackgroundCallFlush. Forced log buffer flush right after Unlock to improve time ordering of info log.
Test Plan: make check; db_bench compare LOG output
Reviewers: sdong
Reviewed By: sdong
CC: leveldb, igor
Differential Revision: https://reviews.facebook.net/D16707
Summary: Now while the background thread is picking compactions, it writes out multiple info_logs, especially for universal compaction, which introduces a chance of waiting log writing in mutex, which is bad. To remove this risk, write all those info logs to a buffer and flush it after releasing the mutex.
Test Plan:
make all check
check the log lines while running some tests that trigger compactions.
Reviewers: haobo, igor, dhruba
Reviewed By: dhruba
CC: i.am.jin.lei, dhruba, yhchiang, leveldb, nkg-
Differential Revision: https://reviews.facebook.net/D16515
Summary:
I though I might get away with as little changes to LogAndApply() as possible. It turns out this is not the case.
This diff introduces different behavior of LogAndApply() for three cases:
1. column family add
2. column family drop
3. no-column family manipulation
(1) and (2) don't support group commit yet.
There were a lot of problems with old version od LogAndApply, detected by db_stress. The biggest was non-atomicity of manifest writes and metadata changes (i.e. if column family add is in manifest, it also has to be in in-memory data structure).
Test Plan: db_stress
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16491
Summary: New unit tests for column families
Test Plan: this is a test
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16359
Summary:
* Added unit test that verifies that obsolete files are deleted.
* Advance log number for empty column family when cutting log file.
* MinLogNumber() bug fix! (caught by the new unit test)
Test Plan: unit test
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16311
Summary: Provide a public API for users to access the table properties for each SSTable.
Test Plan: Added a unit tests to test the function correctness under differnet conditions.
Reviewers: haobo, dhruba, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16083
Summary:
The change to the public behavior:
* When opening a DB or creating new column family client gets a ColumnFamilyHandle.
* As long as column family handle is alive, client can do whatever he wants with it, even drop it
* Dropped column family can still be read from (using the column family handle)
* Added a new call CloseColumnFamily(). Client has to close all column families that he has opened before deleting the DB
* As soon as column family is closed, any calls to DB using that column family handle will fail (also any outstanding calls)
Internally:
* Ref-counting ColumnFamilyData
* New thread-safety for ColumnFamilySet
* Dropped column families are now completely dropped and their memory cleaned-up
Test Plan: added some tests to column_family_test
Reviewers: dhruba, haobo, kailiu, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16101
Summary:
This patch optimized Get() code paths by avoiding malloc of iterators. Iterator creation is moved to mem table rep implementations, where a callback is called when any key is found. This is the same practice as what we do in (SST) table readers.
db_bench result for readrandom following a writeseq, with no compression, single thread and tmpfs, we see throughput improved to 144958 from 139027, about 3%.
Test Plan: make all check
Reviewers: dhruba, haobo, igor
Reviewed By: haobo
CC: leveldb, yhchiang
Differential Revision: https://reviews.facebook.net/D14685
Summary: Replaced most of occurrences of Options with more specific DBOptions. This brings us very close to supporting different configuration options for each column family.
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15933
Summary:
Adapting table cache to column families is interesting. We want table cache to be global LRU, so if some column families are use not as often as others, we want them to be evicted from cache. However, current TableCache object also constructs tables on its own. If table is not found in the cache, TableCache automatically creates new table. We want each column family to be able to specify different table factory.
To solve the problem, we still have a single LRU, but we provide the LRUCache object to TableCache on construction. We have one TableCache per column family, but the underyling cache is shared by all TableCache objects.
This allows us to have a global LRU, but still be able to support different table factories for different column families. Also, in the future it will also be able to support different directories for different column families.
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15915
Summary: Compaction picker and internal key comparator are different for each column family (not global), so they should live in ColumnFamilyData
Test Plan: make check
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15801
Summary: Removed default_cfd_ from all flush code paths. This means we can now flush memtables from arbitrary column families!
Test Plan: Added a new unit test
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15789
Summary: Making room for write will be the hardest part of the column family implementation. For now, I just iterate through all column families and run MakeRoomForWrite() for every one.
Test Plan: make check does not complain
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15597
Summary: ColumnFamilyData grew a lot, there's much more data that it holds now. It makes more sense to encapsulate it better by making it a class.
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15579
Summary: This one is big. It adds ability to write to and read from different column families (see the unit test). It also supports recovery of different column families from log, which was the hardest part to reason about. We need to make sure to never delete the log file which has unflushed data from any column family. To support that, I added another concept, which is versions_->MinLogNumber()
Test Plan: Added a unit test in column_family_test
Reviewers: dhruba, haobo, sdong, kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15537
Summary: This removes the default implementation of LogAndApply that applied the changed to the default column family by default. It is mostly simple reformatting.
Test Plan: make check
Reviewers: dhruba, kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15465
Summary: All memtables and immutable memtables are moved from DBImpl to ColumnFamilyData. For now, they are all referenced from default column family in DBImpl. It shouldn't be hard to get them from custom column family.
Test Plan: make check
Reviewers: dhruba, kailiu, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15459
Summary:
@dhruba, I'm not sure where we need to sync the directory. I implemented the function in Env() and added the dir sync just after we close the newly created file in the builder.
Should I also add FsyncDir() to new files that get created by a compaction?
Test Plan: Confirmed that FsyncDir is returning Status::OK()
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D14751
Summary: There is no reason to have functions NeedCompaction(), MaxCompactionScore() and MaxCompactionScoreLevel() in VersionSet, since they don't access any data in VersionSet.
Test Plan: make check
Reviewers: kailiu, haobo, sdong
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15333
Summary:
A lot of our code implicitly assumes number_levels to be static. ReduceNumberOfLevels() breaks that assumption. For example, after calling ReduceNumberOfLevels(), DBImpl::NumberLevels() will be different from VersionSet::NumberLevels(). This is dangerous. Thankfully, it's not in public headers and is only used from LDB cmd tool. LDB tool is only using it statically, i.e. it never calls it with running DB instance. With this diff, we make it explicitly static. This way, we can assume number_levels to be immutable and not break assumption that lot of our code is relying upon. LDB tool can still use the method.
Also, I removed the method from a separate file since it breaks filename completition. version_se<TAB> now completes to "version_set." instead of "version_set" (without the dot). I don't see a big reason that the function should be in a different file.
Test Plan: reduce_levels_test
Reviewers: dhruba, haobo, kailiu, sdong
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15303
Summary:
I created a separate class ColumnFamilySet to keep track of column families. Before we did this in VersionSet and I believe this approach is cleaner.
Let me know if you have any comments. I will commit tomorrow.
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15357
Summary: The only thing we do with compaction pointers is set them to some values, we never actually read them. I don't know what we used them for, but it doesn't look like we use them anymore.
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15225
sdong