Summary:
This PR fixes https://github.com/facebook/rocksdb/issues/5975. In ```BlockBasedTable::RetrieveMultipleBlocks()```, we were calling ```MaybeReadBlocksAndLoadToCache()```, which is a no-op if neither uncompressed nor compressed block cache are configured.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5991
Test Plan:
1. Add unit tests that fail with the old code and pass with the new
2. make check and asan_check
Cc spetrunia
Differential Revision: D18272744
Pulled By: anand1976
fbshipit-source-id: e62fa6090d1a6adf84fcd51dfd6859b03c6aebfe
Summary:
According to
https://github.com/facebook/rocksdb/wiki/Rocksdb-BlockBasedTable-Format,
the block read by BlockBasedTable::ReadMetaBlock is actually the meta index
block. Therefore, it is better to rename the function to ReadMetaIndexBlock.
This PR also applies some format change to existing code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6009
Test Plan: make check
Differential Revision: D18333238
Pulled By: riversand963
fbshipit-source-id: 2c4340a29b3edba53d19c132cbfd04caf6242aed
Summary:
A recent change introduced readahead inside VerifyChecksum(). However it is not compatible with mmap mode and generated wrong checksum verification failure. Fix it by not enabling readahead in mmap
mode.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5945
Test Plan: Add a unit test that used to fail.
Differential Revision: D18021443
fbshipit-source-id: 6f2eb600f81b26edb02222563a4006869d576bff
Summary:
Amongst other things, PR https://github.com/facebook/rocksdb/issues/5504 refactored the filter block readers so that
only the filter block contents are stored in the block cache (as opposed to the
earlier design where the cache stored the filter block reader itself, leading to
potentially dangling pointers and concurrency bugs). However, this change
introduced a performance hit since with the new code, the metadata fields are
re-parsed upon every access. This patch reunites the block contents with the
filter bits reader to eliminate this overhead; since this is still a self-contained
pure data object, it is safe to store it in the cache. (Note: this is similar to how
the zstd digest is handled.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5936
Test Plan:
make asan_check
filter_bench results for the old code:
```
$ ./filter_bench -quick
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 26.7153
Number of filters: 16669
Total memory (MB): 200.009
Bits/key actual: 10.0647
----------------------------
Inside queries...
Dry run (46b) ns/op: 33.4258
Single filter ns/op: 42.5974
Random filter ns/op: 217.861
----------------------------
Outside queries...
Dry run (25d) ns/op: 32.4217
Single filter ns/op: 50.9855
Random filter ns/op: 219.167
Average FP rate %: 1.13993
----------------------------
Done. (For more info, run with -legend or -help.)
$ ./filter_bench -quick -use_full_block_reader
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 26.5172
Number of filters: 16669
Total memory (MB): 200.009
Bits/key actual: 10.0647
----------------------------
Inside queries...
Dry run (46b) ns/op: 32.3556
Single filter ns/op: 83.2239
Random filter ns/op: 370.676
----------------------------
Outside queries...
Dry run (25d) ns/op: 32.2265
Single filter ns/op: 93.5651
Random filter ns/op: 408.393
Average FP rate %: 1.13993
----------------------------
Done. (For more info, run with -legend or -help.)
```
With the new code:
```
$ ./filter_bench -quick
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 25.4285
Number of filters: 16669
Total memory (MB): 200.009
Bits/key actual: 10.0647
----------------------------
Inside queries...
Dry run (46b) ns/op: 31.0594
Single filter ns/op: 43.8974
Random filter ns/op: 226.075
----------------------------
Outside queries...
Dry run (25d) ns/op: 31.0295
Single filter ns/op: 50.3824
Random filter ns/op: 226.805
Average FP rate %: 1.13993
----------------------------
Done. (For more info, run with -legend or -help.)
$ ./filter_bench -quick -use_full_block_reader
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 26.5308
Number of filters: 16669
Total memory (MB): 200.009
Bits/key actual: 10.0647
----------------------------
Inside queries...
Dry run (46b) ns/op: 33.2968
Single filter ns/op: 58.6163
Random filter ns/op: 291.434
----------------------------
Outside queries...
Dry run (25d) ns/op: 32.1839
Single filter ns/op: 66.9039
Random filter ns/op: 292.828
Average FP rate %: 1.13993
----------------------------
Done. (For more info, run with -legend or -help.)
```
Differential Revision: D17991712
Pulled By: ltamasi
fbshipit-source-id: 7ea205550217bfaaa1d5158ebd658e5832e60f29
Summary:
Since we do not evict a file's blocks from block cache before that file
is deleted, we require a file's cache ID prefix is both unique and
non-reusable. However, the Windows functionality we were relying on only
guaranteed uniqueness. That meant a newly created file could be assigned
the same cache ID prefix as a deleted file. If the newly created file
had block offsets matching the deleted file, full cache keys could be
exactly the same, resulting in obsolete data blocks returned from cache
when trying to read from the new file.
We noticed this when running on FAT32 where compaction was writing out
of order keys due to reading obsolete blocks from its input files. The
functionality is documented as behaving the same on NTFS, although I
wasn't able to repro it there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5844
Test Plan:
we had a reliable repro of out-of-order keys on FAT32 that
was fixed by this change
Differential Revision: D17752442
fbshipit-source-id: 95d983f9196cf415f269e19293b97341edbf7e00
Summary:
When an iterator reseek happens with the user specifying a new iterate_upper_bound in ReadOptions, and the new seek position is at the end of the same data block, the Seek() ends up using a stale value of data_block_within_upper_bound_ and may return incorrect results.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5883
Test Plan: Added a new test case DBIteratorTest.IterReseekNewUpperBound. Verified that it failed due to the assertion failure without the fix, and passes with the fix.
Differential Revision: D17752740
Pulled By: anand1976
fbshipit-source-id: f9b635ff5d6aeb0e1bef102cf8b2f900efd378e3
Summary:
Further apply formatter to more recent commits.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5830
Test Plan: Run all existing tests.
Differential Revision: D17488031
fbshipit-source-id: 137458fd94d56dd271b8b40c522b03036943a2ab
Summary:
file_reader_writer.h and .cc contain several files and helper function, and it's hard to navigate. Separate it to multiple files and put them under file/
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5803
Test Plan: Build whole project using make and cmake.
Differential Revision: D17374550
fbshipit-source-id: 10efca907721e7a78ed25bbf74dc5410dea05987
Summary:
PR https://github.com/facebook/rocksdb/issues/5584 decoupled the uncompression dictionary object from the underlying block data; however, this defeats the purpose of the digested ZSTD dictionary, since the whole point
of the digest is to create it once and reuse it over and over again. This patch goes back to
storing the uncompression dictionary itself in the cache (which should be now safe to do,
since it no longer includes a Statistics pointer), while preserving the rest of the refactoring.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5645
Test Plan: make asan_check
Differential Revision: D16551864
Pulled By: ltamasi
fbshipit-source-id: 2a7e2d34bb16e70e3c816506d5afe1d842057800
Summary:
To improve code readability, since RetrieveBlock already calls MaybeReadBlockAndLoadToCache, we avoid name similarity of the functions that call RetrieveBlock with MaybeReadBlockAndLoadToCache. The patch thus renames MaybeLoadBlocksToCache to RetrieveMultipleBlock and deletes GetDataBlockFromCache, which contains only two lines.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5726
Differential Revision: D16962535
Pulled By: maysamyabandeh
fbshipit-source-id: 99e8946808ce4eb7857592b9003812e3004f92d6
Summary:
The batched MultiGet() implementation was not correctly handling bloom filter lookups when whole_key_filtering is disabled. It was incorrectly skipping keys not in the prefix_extractor domain, and not calling transform for keys in domain. This PR fixes both problems by moving the domain check and transformation to the FilterBlockReader.
Tests:
Unit test (confirmed failed before the fix)
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5665
Differential Revision: D16902380
Pulled By: anand1976
fbshipit-source-id: a6be81ad68a6e37134a65246aec7a2c590eccf00
Summary:
Right now VerifyChecksum() doesn't do read-ahead. In some use cases, users won't be able to achieve good performance. With this change, by default, RocksDB will do a default readahead, and users will be able to overwrite the readahead size by passing in a ReadOptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5713
Test Plan: Add a new unit test.
Differential Revision: D16860874
fbshipit-source-id: 0cff0fe79ac855d3d068e6ccd770770854a68413
Summary:
Previous PR https://github.com/facebook/rocksdb/pull/3601 added support for making prefix_extractor dynamically mutable. However, there was a missing check for hash index when creating new BlockBasedTableIterator. While the check may be redundant because no other types of IndexReader makes uses of the flag, it is less error-prone to add the missing check so that future index reader implementation will not worry about violating the contract.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5712
Differential Revision: D16842052
Pulled By: miasantreble
fbshipit-source-id: aef11c0ff7a690ed248f5b8fe23481cac486b381
Summary:
VersionSet::ApproximateSize doesn't need to create two separate index iterators and do binary search for each in BlockBasedTable. So BlockBasedTable::ApproximateSize was added that creates the iterator once and uses it to calculate the data size between start and end keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5693
Differential Revision: D16774056
Pulled By: elipoz
fbshipit-source-id: 53ce262e1a057788243bf30cd9b8aa6581df1a18
Summary:
PR https://github.com/facebook/rocksdb/issues/5298 (and subsequent related patches) unintentionally changed the
semantics of cache_index_and_filter_blocks: historically, this option
only affected the main index/filter block; with the changes, it affects
index/filter partitions as well. This can cause performance issues when
cache_index_and_filter_blocks is false since in this case, partitions are
neither cached nor preloaded (i.e. they are loaded on demand upon each
access). The patch reverts to the earlier behavior, that is, partitions
are cached similarly to data blocks regardless of the value of the above
option.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5705
Test Plan:
make check
./db_bench -benchmarks=fillrandom --statistics --stats_interval_seconds=1 --duration=30 --num=500000000 --bloom_bits=20 --partition_index_and_filters=true --cache_index_and_filter_blocks=false
./db_bench -benchmarks=readrandom --use_existing_db --statistics --stats_interval_seconds=1 --duration=10 --num=500000000 --bloom_bits=20 --partition_index_and_filters=true --cache_index_and_filter_blocks=false --cache_size=8000000000
Relevant statistics from the readrandom benchmark with the old code:
rocksdb.block.cache.index.miss COUNT : 0
rocksdb.block.cache.index.hit COUNT : 0
rocksdb.block.cache.index.add COUNT : 0
rocksdb.block.cache.index.bytes.insert COUNT : 0
rocksdb.block.cache.index.bytes.evict COUNT : 0
rocksdb.block.cache.filter.miss COUNT : 0
rocksdb.block.cache.filter.hit COUNT : 0
rocksdb.block.cache.filter.add COUNT : 0
rocksdb.block.cache.filter.bytes.insert COUNT : 0
rocksdb.block.cache.filter.bytes.evict COUNT : 0
With the new code:
rocksdb.block.cache.index.miss COUNT : 2500
rocksdb.block.cache.index.hit COUNT : 42696
rocksdb.block.cache.index.add COUNT : 2500
rocksdb.block.cache.index.bytes.insert COUNT : 4050048
rocksdb.block.cache.index.bytes.evict COUNT : 0
rocksdb.block.cache.filter.miss COUNT : 2500
rocksdb.block.cache.filter.hit COUNT : 4550493
rocksdb.block.cache.filter.add COUNT : 2500
rocksdb.block.cache.filter.bytes.insert COUNT : 10331040
rocksdb.block.cache.filter.bytes.evict COUNT : 0
Differential Revision: D16817382
Pulled By: ltamasi
fbshipit-source-id: 28a516b0da1f041a03313e0b70b28cf5cf205d00
Summary:
RocksDB has historically stored uncompression dictionary objects in the block
cache as opposed to storing just the block contents. This neccesitated
evicting the object upon table close. With the new code, only the raw blocks
are stored in the cache, eliminating the need for eviction.
In addition, the patch makes the following improvements:
1) Compression dictionary blocks are now prefetched/pinned similarly to
index/filter blocks.
2) A copy operation got eliminated when the uncompression dictionary is
retrieved.
3) Errors related to retrieving the uncompression dictionary are propagated as
opposed to silently ignored.
Note: the patch temporarily breaks the compression dictionary evicition stats.
They will be fixed in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5584
Test Plan: make asan_check
Differential Revision: D16344151
Pulled By: ltamasi
fbshipit-source-id: 2962b295f5b19628f9da88a3fcebbce5a5017a7b
Summary:
1. Avoid creating the iterator in order to call BlockBasedTable::ApproximateOffsetOf(). Instead, directly call into it.
2. Optimize BlockBasedTable::ApproximateOffsetOf() keeps the index block iterator in stack.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5613
Differential Revision: D16442660
Pulled By: elipoz
fbshipit-source-id: 9320be3e918c139b10e758cbbb684706d172e516
Summary:
This PR traces the referenced key for Get for all types of blocks. This is useful when evaluating hybrid row-block caches.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5548
Test Plan: make clean && USE_CLANG=1 make check -j32
Differential Revision: D16157979
Pulled By: HaoyuHuang
fbshipit-source-id: f6327411c9deb74e35e22a35f66cdbae09ab9d87
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
Summary:
clang analyze fails after https://github.com/facebook/rocksdb/pull/5514 for this failure:
table/block_based/block_based_table_reader.cc:3450:16: warning: Called C++ object pointer is null
if (!get_context->SaveValue(
^~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
The reaon is that a branching is added earlier in the function on get_context is null or not, CLANG analyze thinks that it can be null and we make the function call withou the null checking.
Fix the issue by removing the branch and add an assert.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5542
Test Plan: "make all check" passes and CLANG analyze failure goes away.
Differential Revision: D16133988
fbshipit-source-id: d4627d03c4746254cc11926c523931086ccebcda
Summary:
This PR associates a unique id with Get and MultiGet. This enables us to track how many blocks a Get/MultiGet request accesses. We can also measure the impact of row cache vs block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5514
Test Plan: make clean && COMPILE_WITH_ASAN=1 make check -j32
Differential Revision: D16032681
Pulled By: HaoyuHuang
fbshipit-source-id: 775b05f4440badd58de6667e3ec9f4fc87a0af4c
Summary:
Enhancement to MultiGet batching to read data blocks required for keys in a batch in parallel from disk. It uses Env::MultiRead() API to read multiple blocks and reduce latency.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5464
Test Plan:
1. make check
2. make asan_check
3. make asan_crash
Differential Revision: D15911771
Pulled By: anand1976
fbshipit-source-id: 605036b9af0f90ca0020dc87c3a86b4da6e83394
Summary:
Mid-point insertion is a useful feature and is mature now. Make it default. Also changed cache_index_and_filter_blocks_with_high_priority=true as default accordingly, so that we won't evict index and filter blocks easier after the change, to avoid too many surprises to users.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5508
Test Plan: Run all existing tests.
Differential Revision: D16021179
fbshipit-source-id: ce8456e8d43b3bfb48df6c304b5290a9d19817eb
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
Summary:
This PR adds more callers for table readers. These information are only used for block cache analysis so that we can know which caller accesses a block.
1. It renames the BlockCacheLookupCaller to TableReaderCaller as passing the caller from upstream requires changes to table_reader.h and TableReaderCaller is a more appropriate name.
2. It adds more table reader callers in table/table_reader_caller.h, e.g., kCompactionRefill, kExternalSSTIngestion, and kBuildTable.
This PR is long as it requires modification of interfaces in table_reader.h, e.g., NewIterator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5454
Test Plan: make clean && COMPILE_WITH_ASAN=1 make check -j32.
Differential Revision: D15819451
Pulled By: HaoyuHuang
fbshipit-source-id: b6caa704c8fb96ddd15b9a934b7e7ea87f88092d
Summary:
Currently the read-ahead logic for user reads and compaction reads go through different code paths where compaction reads create new table readers and use `ReadaheadRandomAccessFile`. This change is to unify read-ahead logic to use read-ahead in BlockBasedTableReader::InitDataBlock(). As a result of the change `ReadAheadRandomAccessFile` class and `new_table_reader_for_compaction_inputs` option will no longer be used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5431
Test Plan:
make check
Here is the benchmarking - https://gist.github.com/vjnadimpalli/083cf423f7b6aa12dcdb14c858bc18a5
Differential Revision: D15772533
Pulled By: vjnadimpalli
fbshipit-source-id: b71dca710590471ede6fb37553388654e2e479b9
Summary:
The patch brings the semantics of per-block-type read performance
context counters in sync with the generic block_read_count by only
incrementing the counter if the block was actually read from the file.
It also fixes index_block_read_count, which fell victim to the
refactoring in PR https://github.com/facebook/rocksdb/issues/5298.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5484
Test Plan: Extended the unit tests.
Differential Revision: D15887431
Pulled By: ltamasi
fbshipit-source-id: a3889759d0ac5759d56625d692cd828d1b9207a6
Summary:
PR https://github.com/facebook/rocksdb/issues/5298 subtly changed how read options are applied to the index block
during a Get, MultiGet, or iteration. Earlier, only the read_tier option
applied to the index block read; since PR https://github.com/facebook/rocksdb/issues/5298, fill_cache and
verify_checksums also have an effect. This patch restores the earlier
behavior to prevent surprise memory increases for clients due to the
index block not being cached.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5481
Test Plan: make check
Differential Revision: D15883082
Pulled By: ltamasi
fbshipit-source-id: 9a065ec3a6db5a365cf6dd5e95190a20c5756356
Summary:
This PR integrates the block cache tracer into block based table reader. The tracer will write the block cache accesses using the trace_writer. The tracer is null in this PR so that nothing will be logged.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5441
Differential Revision: D15772029
Pulled By: HaoyuHuang
fbshipit-source-id: a64adb92642cd23222e0ba8b10d86bf522b42f9b
Summary:
This PR integrates the block cache tracer class into db_impl.cc.
db_impl.cc contains a member variable of AtomicBlockCacheTraceWriter class and passes its reference to the block_based_table_reader.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5433
Differential Revision: D15728016
Pulled By: HaoyuHuang
fbshipit-source-id: 23d5659e8c82d556833dcc1a5558aac8c1f7db71
Summary:
BlockCacheLookupContext only contains the caller for now.
We will trace block accesses at five places:
1. BlockBasedTable::GetFilter.
2. BlockBasedTable::GetUncompressedDict.
3. BlockBasedTable::MaybeReadAndLoadToCache. (To trace access on data, index, and range deletion block.)
4. BlockBasedTable::Get. (To trace the referenced key and whether the referenced key exists in a fetched data block.)
5. BlockBasedTable::MultiGet. (To trace the referenced key and whether the referenced key exists in a fetched data block.)
We create the context at:
1. BlockBasedTable::Get. (kUserGet)
2. BlockBasedTable::MultiGet. (kUserMGet)
3. BlockBasedTable::NewIterator. (either kUserIterator, kCompaction, or external SST ingestion calls this function.)
4. BlockBasedTable::Open. (kPrefetch)
5. Index/Filter::CacheDependencies. (kPrefetch)
6. BlockBasedTable::ApproximateOffsetOf. (kCompaction or kUserApproximateSize).
I loaded 1 million key-value pairs into the database and ran the readrandom benchmark with a single thread. I gave the block cache 10 GB to make sure all reads hit the block cache after warmup. The throughput is comparable.
Throughput of this PR: 231334 ops/s.
Throughput of the master branch: 238428 ops/s.
Experiment setup:
RocksDB: version 6.2
Date: Mon Jun 10 10:42:51 2019
CPU: 24 * Intel Core Processor (Skylake)
CPUCache: 16384 KB
Keys: 20 bytes each
Values: 100 bytes each (100 bytes after compression)
Entries: 1000000
Prefix: 20 bytes
Keys per prefix: 0
RawSize: 114.4 MB (estimated)
FileSize: 114.4 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: NoCompression
Compression sampling rate: 0
Memtablerep: skip_list
Perf Level: 1
Load command: ./db_bench --benchmarks="fillseq" --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --statistics --cache_index_and_filter_blocks --cache_size=10737418240 --disable_auto_compactions=1 --disable_wal=1 --compression_type=none --min_level_to_compress=-1 --compression_ratio=1 --num=1000000
Run command: ./db_bench --benchmarks="readrandom,stats" --use_existing_db --threads=1 --duration=120 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --statistics --cache_index_and_filter_blocks --cache_size=10737418240 --disable_auto_compactions=1 --disable_wal=1 --compression_type=none --min_level_to_compress=-1 --compression_ratio=1 --num=1000000 --duration=120
TODOs:
1. Create a caller for external SST file ingestion and differentiate the callers for iterator.
2. Integrate tracer to trace block cache accesses.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5421
Differential Revision: D15704258
Pulled By: HaoyuHuang
fbshipit-source-id: 4aa8a55f8cb1576ffb367bfa3186a91d8f06d93a
Summary:
Instead of creating a new DataBlockIterator for every key in a MultiGet batch, reuse it if the next key is in the same block. This results in a small 1-2% cpu improvement.
TEST_TMPDIR=/dev/shm/multiget numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Without the change -
multireadrandom : 3.066 micros/op 326122 ops/sec; (29375968 of 29375968 found)
With the change -
multireadrandom : 3.003 micros/op 332945 ops/sec; (29983968 of 29983968 found)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5314
Differential Revision: D15742108
Pulled By: anand1976
fbshipit-source-id: 220fb0b8eea9a0d602ddeb371528f7af7936d771
Summary:
PR #5111 reduced the number of key comparisons when iterating with
upper/lower bounds; however, this caused a regression for MyRocks.
Reverting to the previous behavior in BlockBasedTableIterator as a hotfix.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5428
Differential Revision: D15721038
Pulled By: ltamasi
fbshipit-source-id: 5450106442f1763bccd17f6cfd648697f2ae8b6c
Summary:
The patch cleans up the handling of cache hit/miss/insertion related
performance counters, get context counters, and statistics by
eliminating some code duplication and factoring out the affected logic
into separate methods. In addition, it makes the semantics of cache hit
metrics more consistent by changing the code so that accessing a
partition of partitioned indexes/filters through a pinned reference no
longer counts as a cache hit.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5408
Differential Revision: D15610883
Pulled By: ltamasi
fbshipit-source-id: ee749c18965077aca971d8f8bee8b24ed8fa76f1
Summary:
It's useful to be able to (optionally) associate key-value pairs with user-provided timestamps. This PR is an early effort towards this goal and continues the work of facebook#4942. A suite of new unit tests exist in DBBasicTestWithTimestampWithParam. Support for timestamp requires the user to provide timestamp as a slice in `ReadOptions` and `WriteOptions`. All timestamps of the same database must share the same length, format, etc. The format of the timestamp is the same throughout the same database, and the user is responsible for providing a comparator function (Comparator) to order the <key, timestamp> tuples. Once created, the format and length of the timestamp cannot change (at least for now).
Test plan (on devserver):
```
$COMPILE_WITH_ASAN=1 make -j32 all
$./db_basic_test --gtest_filter=Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/*
$make check
```
All tests must pass.
We also run the following db_bench tests to verify whether there is regression on Get/Put while timestamp is not enabled.
```
$TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillseq,readrandom -num=1000000
$TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=1000000
```
Repeat for 6 times for both versions.
Results are as follows:
```
| | readrandom | fillrandom |
| master | 16.77 MB/s | 47.05 MB/s |
| PR5079 | 16.44 MB/s | 47.03 MB/s |
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5079
Differential Revision: D15132946
Pulled By: riversand963
fbshipit-source-id: 833a0d657eac21182f0f206c910a6438154c742c
Summary:
The commit makes GetEntryFromCache become a member function. It also makes all its callers become member functions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5394
Differential Revision: D15579222
Pulled By: HaoyuHuang
fbshipit-source-id: 07509c42ee9022dcded54950012bd3bd562aa1ae
Summary:
Many methods are passing around pointers to non-const objects when in fact
they do not/should not modify said objects. The patch makes the semantics
clearer and also helps from a thread safety point-of-view by changing some
pointers to pointers-to-const and marking some instance methods as const.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5383
Differential Revision: D15562770
Pulled By: ltamasi
fbshipit-source-id: 89361dadbb8b25bbe54d17e8da28fee24a2419af
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
Previously if iterator upper/lower bound presents, `DBIter` will check the bound for every key. This patch turns the check into per-file or per-data block check when applicable, by checking against either file largest/smallest key or block index key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5111
Differential Revision: D15330061
Pulled By: siying
fbshipit-source-id: 8a653fe3cd50d94d81eb2d13b087326c58ee2024
Summary:
https://github.com/facebook/rocksdb/pull/5256 broke it: `block_iter_.user_key()` may not be valid even if `block_iter_points_to_real_block_` is true. E.g. if there was an IO error or Status::Incomplete.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5291
Differential Revision: D15273324
Pulled By: al13n321
fbshipit-source-id: 442e5b09f9884a58f92a6ac1ca93af719c219886
Summary:
CachableEntry is used in a variety of contexts: it may refer to a cached
object (i.e. an object in the block cache), an owned object, or an
unowned object; also, in some cases (most notably with iterators), the
responsibility of managing the pointed-to object gets handed off to
another object. Each of the above scenarios have different implications
for the lifecycle of the referenced object. For the most part, the patch
does not change the lifecycle of managed objects; however, it makes
these relationships explicit, and it also enables us to eliminate some
hacks and accident-prone code around releasing cache handles and
deleting/cleaning up objects. (The only places where the patch changes
how an objects are managed are the partitions of partitioned indexes and
filters.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5252
Differential Revision: D15101358
Pulled By: ltamasi
fbshipit-source-id: 9eb59e9ae5a7230e3345789762d0ba1f189485be
Summary:
Right now there is a potential race condition where two threads are created to iterate through the DB (https://gist.github.com/miasantreble/88f5798a397ee7cb8e7baff9db2d9e85). The problem is that in `BlockBasedTable::NewIndexIterator`, if both threads failed to find index_reader from block cache, they will call `CreateIndexReader->UpdateIndexType()` which creates a race to update `index_type` in the shared rep_ object. By checking the code, we realize the index type is always populated by `PrefetchIndexAndFilterBlocks` during the table `Open` call, so there is no need to update index type every time during iterator creation. This PR attempts to fix the race condition by removing the unnecessary call to `UpdateIndexType`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5288
Differential Revision: D15252509
Pulled By: miasantreble
fbshipit-source-id: 6e3258652121d5c76d267f7ac457e15c5e84756e
Summary:
Right now, when Seek() is called again, RocksDB always does a binary search against the files and index blocks, even if they end up with the same file/block. Improve it as following:
1. in LevelIterator, reseek first try to check the boundary of the current file. If it falls into the same file, skip the binary search to find the file
2. in block based table iterator, reseek skip to reseek the iterator block if the seek key is larger than the current key and lower than the index key (boundary of the current block and the next block).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5256
Differential Revision: D15105072
Pulled By: siying
fbshipit-source-id: 39634bdb4a881082451fa39cecd7ecf12160bf80
anand76