Summary:
PR https://github.com/facebook/rocksdb/issues/9888 started to enforce the contract of single delete described in https://github.com/facebook/rocksdb/wiki/Single-Delete.
For some of existing use cases, it is desirable to have a transition during which compaction will not fail
if the contract is violated. Therefore, we add a temporary option `enforce_single_del_contracts` to allow
application to opt out from this new strict behavior. Once transition completes, the flag can be set to `true` again.
In a future release, the option will be removed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9983
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D36333672
Pulled By: riversand963
fbshipit-source-id: dcb703ea0ed08076a1422f1bfb9914afe3c2caa2
Summary:
In one path of BlockBasedTable::MultiGet(), Next() is directly called after calling Seek() against the index iterator. This might cause crash if an I/O error happens in Seek().
The bug is discovered in crash test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9993
Test Plan: See existing CI tests pass.
Reviewed By: anand1976
Differential Revision: D36381758
fbshipit-source-id: a11e0aa48dcee168c2554c33b532646ffdb68877
Summary:
Add methods to set the various functions (Parse, Serialize, Equals) to the OptionTypeInfo. These methods simplify the number of constructors required for OptionTypeInfo and make the code a little clearer.
Add functions to the OptionTypeInfo for Prepare and Validate. These methods allow types other than Configurable and Customizable to have Prepare and Validate logic. These methods could be used by an option to guarantee that its settings were in a range or that a value was initialized.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9411
Reviewed By: pdillinger
Differential Revision: D36174849
Pulled By: mrambacher
fbshipit-source-id: 72517d8c6bab4723788a4c1a9e16590bff870125
Summary:
PR 9929 adds a new CompactionFilter::Decision, i.e.
kRemoveWithSingleDelete so that CompactionFilter can indicate to
CompactionIterator that a PUT can only be removed with SD. However, how
CompactionIterator handles such a key is implementation detail which
should not be implied in the public API. In fact,
such a PUT can just be dropped. This is an optimization which we will apply in the near future.
Discussion thread: https://github.com/facebook/rocksdb/pull/9929#discussion_r863198964
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9951
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D36156590
Pulled By: riversand963
fbshipit-source-id: 7b7d01f47bba4cad7d9cca6ca52984f27f88b372
Summary:
If the DB path is specified, the user would expect ldb loads the
options from the path, but it's not:
```
$ ldb list_live_files_metadata --db=`pwd`
```
Default `try_load_options` to true in that case. The user can still
disable that by:
```
$ ldb list_live_files_metadata --db=`pwd` --try_load_options=false
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9937
Test Plan:
`ldb list_live_files_metadata --db=`pwd`` is able to work for
a db generated with different options.num_levels.
Reviewed By: ajkr
Differential Revision: D36106708
Pulled By: jay-zhuang
fbshipit-source-id: 2732fdc027a4d172436b2c9b6a9787b56b10c710
Summary:
When compaction filter determines that a key should be removed, it updates the internal key's type
to `Delete`. If this internal key is preserved in current compaction but seen by a later compaction
together with `SingleDelete`, it will cause compaction iterator to return Corruption.
To fix the issue, compaction filter should return more information in addition to the intention of removing
a key. Therefore, we add a new `kRemoveWithSingleDelete` to `CompactionFilter::Decision`. Seeing
`kRemoveWithSingleDelete`, compaction iterator will update the op type of the internal key to `kTypeSingleDelete`.
In addition, I updated db_stress_shared_state.[cc|h] so that `no_overwrite_ids_` becomes `const`. It is easier to
reason about thread-safety if accessed from multiple threads. This information is passed to `PrepareTxnDBOptions()`
when calling from `Open()` so that we can set up the rollback deletion type callback for transactions.
Finally, disable compaction filter for multiops_txn because the key removal logic of `DbStressCompactionFilter` does
not quite work with `MultiOpsTxnsStressTest`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9929
Test Plan:
make check
make crash_test
make crash_test_with_txn
Reviewed By: anand1976
Differential Revision: D36069678
Pulled By: riversand963
fbshipit-source-id: cedd2f1ba958af59ad3916f1ba6f424307955f92
Summary:
Enforce the contract of SingleDelete so that they are not mixed with
Delete for the same key. Otherwise, it will lead to undefined behavior.
See https://github.com/facebook/rocksdb/wiki/Single-Delete#notes.
Also fix unit tests and write-unprepared.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9888
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D35837817
Pulled By: riversand963
fbshipit-source-id: acd06e4dcba8cb18df92b44ed18c57e10e5a7635
Summary:
When MultiGet() determines that multiple query keys can be
served by examining the same data block in block cache (one Lookup()),
each PinnableSlice referring to data in that data block needs to hold
on to the block in cache so that they can be released at arbitrary
times by the API user. Historically this is accomplished with extra
calls to Ref() on the Handle from Lookup(), with each PinnableSlice
cleanup calling Release() on the Handle, but this creates extra
contention on the block cache for the extra Ref()s and Release()es,
especially because they hit the same cache shard repeatedly.
In the case of merge operands (possibly more cases?), the problem was
compounded by doing an extra Ref()+eventual Release() for each merge
operand for a key reusing a block (which could be the same key!), rather
than one Ref() per key. (Note: the non-shared case with `biter` was
already one per key.)
This change optimizes MultiGet not to rely on these extra, contentious
Ref()+Release() calls by instead, in the shared block case, wrapping
the cache Release() cleanup in a refcounted object referenced by the
PinnableSlices, such that after the last wrapped reference is released,
the cache entry is Release()ed. Relaxed atomic refcounts should be
much faster than mutex-guarded Ref() and Release(), and much less prone
to a performance cliff when MultiGet() does a lot of block sharing.
Note that I did not use std::shared_ptr, because that would require an
extra indirection object (shared_ptr itself new/delete) in order to
associate a ref increment/decrement with a Cleanable cleanup entry. (If
I assumed it was the size of two pointers, I could do some hackery to
make it work without the extra indirection, but that's too fragile.)
Some details:
* Fixed (removed) extra block cache tracing entries in cases of cache
entry reuse in MultiGet, but it's likely that in some other cases traces
are missing (XXX comment inserted)
* Moved existing implementations for cleanable.h from iterator.cc to
new cleanable.cc
* Improved API comments on Cleanable
* Added a public SharedCleanablePtr class to cleanable.h in case others
could benefit from the same pattern (potentially many Cleanables and/or
smart pointers referencing a shared Cleanable)
* Add a typedef for MultiGetContext::Mask
* Some variable renaming for clarity
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9899
Test Plan:
Added unit tests for SharedCleanablePtr.
Greatly enhanced ability of existing tests to detect cache use-after-free.
* Release PinnableSlices from MultiGet as they are read rather than in
bulk (in db_test_util wrapper).
* In ASAN build, default to using a trivially small LRUCache for block_cache
so that entries are immediately erased when unreferenced. (Updated two
tests that depend on caching.) New ASAN testsuite running time seems
OK to me.
If I introduce a bug into my implementation where we skip the shared
cleanups on block reuse, ASAN detects the bug in
`db_basic_test *MultiGet*`. If I remove either of the above testing
enhancements, the bug is not detected.
Consider for follow-up work: manipulate or randomize ordering of
PinnableSlice use and release from MultiGet db_test_util wrapper. But in
typical cases, natural ordering gives pretty good functional coverage.
Performance test:
In the extreme (but possible) case of MultiGetting the same or adjacent keys
in a batch, throughput can improve by an order of magnitude.
`./db_bench -benchmarks=multireadrandom -db=/dev/shm/testdb -readonly -num=5 -duration=10 -threads=20 -multiread_batched -batch_size=200`
Before ops/sec, num=5: 1,384,394
Before ops/sec, num=500: 6,423,720
After ops/sec, num=500: 10,658,794
After ops/sec, num=5: 16,027,257
Also note that previously, with high parallelism, having query keys
concentrated in a single block was worse than spreading them out a bit. Now
concentrated in a single block is faster than spread out, which is hopefully
consistent with natural expectation.
Random query performance: with num=1000000, over 999 x 10s runs running before & after simultaneously (each -threads=12):
Before: multireadrandom [AVG 999 runs] : 1088699 (± 7344) ops/sec; 120.4 (± 0.8 ) MB/sec
After: multireadrandom [AVG 999 runs] : 1090402 (± 7230) ops/sec; 120.6 (± 0.8 ) MB/sec
Possibly better, possibly in the noise.
Reviewed By: anand1976
Differential Revision: D35907003
Pulled By: pdillinger
fbshipit-source-id: bbd244d703649a8ca12d476f2d03853ed9d1a17e
Summary:
Left HISTORY.md and unit tests.
Added a new unit test to repro the corruption scenario that this PR fixes, and HISTORY.md line for that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9906
Reviewed By: riversand963
Differential Revision: D35940093
Pulled By: ajkr
fbshipit-source-id: 9816f99e1ce405ba36f316beb4f6378c37c8c86b
Summary:
Add stats PREFETCHED_BYTES_DISCARDED and POLL_WAIT_MICROS.
PREFETCHED_BYTES_DISCARDED records number of prefetched bytes discarded by
FilePrefetchBuffer. POLL_WAIT_MICROS records the time taken by underling
file_system Poll API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9845
Test Plan: Update existing tests
Reviewed By: anand1976
Differential Revision: D35909694
Pulled By: akankshamahajan15
fbshipit-source-id: e009ef940bb9ed72c9446f5529095caabb8a1e36
Summary:
This PR does not affect write-committed.
Add a member, `rollback_deletion_type_callback` to TransactionDBOptions
so that a write-prepared transaction, when rolling back, can call this
callback to decide if a `Delete` or `SingleDelete` should be used to
cancel a prior `Put` written to the database during prepare phase.
The purpose of this PR is to prevent mixing `Delete` and `SingleDelete`
for the same key, causing undefined behaviors. Without this PR, the
following can happen:
```
// The application always issues SingleDelete when deleting keys.
txn1->Put('a');
txn1->Prepare(); // writes to memtable and potentially gets flushed/compacted to Lmax
txn1->Rollback(); // inserts DELETE('a')
txn2->Put('a');
txn2->Commit(); // writes to memtable and potentially gets flushed/compacted
```
In the database, we may have
```
L0: [PUT('a', s=100)]
L1: [DELETE('a', s=90)]
Lmax: [PUT('a', s=0)]
```
If a compaction compacts L0 and L1, then we have
```
L1: [PUT('a', s=100)]
Lmax: [PUT('a', s=0)]
```
If a future transaction issues a SingleDelete, we have
```
L0: [SD('a', s=110)]
L1: [PUT('a', s=100)]
Lmax: [PUT('a', s=0)]
```
Then, a compaction including L0, L1 and Lmax leads to
```
Lmax: [PUT('a', s=0)]
```
which is incorrect.
Similar bugs reported and addressed in
https://github.com/cockroachdb/pebble/issues/1255. Based on our team's
current priority, we have decided to take this approach for now. We may
come back and revisit in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9873
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D35762170
Pulled By: riversand963
fbshipit-source-id: b28d56eefc786b53c9844b9ef4a7807acdd82c8d
Summary:
... by filling out remaining testing hole: handling of
db_pathsi+cf_paths. (Note that while GetLiveFilesStorageInfo works
with db_paths / cf_paths, Checkpoint and BackupEngine do not and
are marked appropriately.)
Also improved comments for "live files" APIs, and grouped them
together in db.h.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9868
Test Plan: Adding to existing unit tests
Reviewed By: jay-zhuang
Differential Revision: D35752254
Pulled By: pdillinger
fbshipit-source-id: c70eb67748fad61826e2f554b674638700abefb2
Summary:
We don't really have a mechanism for internal-only release
notes, so adding this to the standard release notes. For picking into
7.2 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9872
Test Plan: release note only
Reviewed By: jay-zhuang
Differential Revision: D35761307
Pulled By: pdillinger
fbshipit-source-id: 5d1932767fff48456323df948604dbb956ac27b2
Summary:
Add a merge operator that allows users to register specific aggregation function so that they can does aggregation based per key using different aggregation types.
See comments of function CreateAggMergeOperator() for actual usage.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9780
Test Plan: Add a unit test to coverage various cases.
Reviewed By: ltamasi
Differential Revision: D35267444
fbshipit-source-id: 5b02f31c4f3e17e96dd4025cdc49fca8c2868628
Summary:
This new options allows application to specify that files must be
ingested to bottommost level, otherwise the ingestion will fail instead
of silently ingesting to a non-bottommost level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9849
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D35680307
Pulled By: riversand963
fbshipit-source-id: 01cf54ef6c76198f7654dc06b5544631dea1be1e
Summary:
Make `DB::GetUpdatesSince` return early if told to scan WALs generated by transactions
with write-prepared or write-unprepared policies (`seq_per_batch` is true), as indicated by
API comment.
Also add checks to `TransactionLogIterator` to clarify some conditions.
No API change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9459
Test Plan:
make check
Closing https://github.com/facebook/rocksdb/issues/1565
Reviewed By: akankshamahajan15
Differential Revision: D33821243
Pulled By: riversand963
fbshipit-source-id: c8b155d020ce0980e2d3b3b1da40b96e65b48d79
Summary:
This gives users the ability to examine the map populated by `GetMapProperty()` with property `kBlockCacheEntryStats`. It also sets us up for a possible future where cache reservations are configured according to `CacheEntryRole`s rather than flags coupled to roles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9838
Test Plan:
- migrated test DBBlockCacheTest.CacheEntryRoleStats to use this API. That test verifies some of the contents are as expected
- added a DBPropertiesTest to verify the public map keys are present, and nothing else
Reviewed By: hx235
Differential Revision: D35629493
Pulled By: ajkr
fbshipit-source-id: 5c4356b8560e85d1f881fd32c44c15960b02fc68
Summary:
This information has been already available as part of the `rocksdb.blob-stats`
string property. The patch adds a dedicated integer property to make it easier
to surface this information in monitoring systems.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9835
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D35619495
Pulled By: ltamasi
fbshipit-source-id: 03fb0b228aa27d3859a1e3783bcb7eca095607f8
Summary:
So the user is able to set event listener on the compactor
side.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9821
Test Plan: unittest added
Reviewed By: ajkr
Differential Revision: D35485388
Pulled By: jay-zhuang
fbshipit-source-id: 669d8a3aaee012b75b940470306756c03ffa09b2
Summary:
1) In case of non-TransactionDB and avoid_flush_during_recovery = true, RocksDB won't
flush the data from WAL to L0 for all column families if possible. As a
result, not all column families can increase their log_numbers, and
min_log_number_to_keep won't change.
2) For transaction DB (.allow_2pc), even with the flush, there may be old WAL files that it must not delete because they can contain data of uncommitted transactions and min_log_number_to_keep won't change.
If we persist a new MANIFEST with
advanced log_numbers for some column families, then during a second
crash after persisting the MANIFEST, RocksDB will see some column
families' log_numbers larger than the corrupted wal, and the "column family inconsistency" error will be hit, causing recovery to fail.
As a solution,
1. the corrupted WALs whose numbers are larger than the
corrupted wal and smaller than the new WAL will be moved to archive folder.
2. Currently, RocksDB DB::Open() may creates and writes to two new MANIFEST files even before recovery succeeds. This PR buffers the edits in a structure and writes to a new MANIFEST after recovery is successful
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9634
Test Plan:
1. Added new unit tests
2. make crast_test -j
Reviewed By: riversand963
Differential Revision: D34463666
Pulled By: akankshamahajan15
fbshipit-source-id: e233d3af0ed4e2028ca0cf051e5a334a0fdc9d19
Summary:
Currently async prefetching is enabled for implicit internal auto readahead in FilePrefetchBuffer if `ReadOptions.async_io` is set. This PR enables async prefetching for `ReadOptions.readahead_size` when `ReadOptions.async_io` is set true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9827
Test Plan: Update unit test
Reviewed By: anand1976
Differential Revision: D35552129
Pulled By: akankshamahajan15
fbshipit-source-id: d9f9a96672852a591375a21eef15355cf3289f5c
Summary:
Update stats in random_access_file_reader for Read and
ReadAsync API to take into account the read latency for async
prefetching.
It also fixes ERROR_HANDLER_AUTORESUME_RETRY_COUNT stat whose value was
incorrect in portal.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9810
Test Plan: Update unit test
Reviewed By: anand1976
Differential Revision: D35433081
Pulled By: akankshamahajan15
fbshipit-source-id: aeec3901270e58a003ce6b5214bd25ddcb3a12a9
Summary:
For write-prepared/write-unprepared transactions,
GetCommitTimeWriteBatch() can be used only if the transaction is started
with `TransactionOptions::use_only_the_last_commit_time_batch_for_recovery` set
to true. Otherwise, it is possible that multiple uncommitted versions of the
same key exist in the database. During bottommost compaction, RocksDB may
set the sequence numbers of both to zero once they become committed, causing
output SST file to have two identical internal keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9794
Test Plan:
make check
pay special attention to the following
```
transaction_test --gtest_filter=MySQLStyleTransactionTest/MySQLStyleTransactionTest.TransactionStressTest/*
```
Reviewed By: lth
Differential Revision: D35327214
Pulled By: riversand963
fbshipit-source-id: 3bae00a28359c10e96e4c6f676d20de5610d8a0f
Summary:
If FilePrefetchBuffer object is destroyed and then later Poll() calls callback on object which has been destroyed, it gives segfault on accessing destroyed object. It was caught after adding unit tests that tests Posix implementation of ReadAsync and Poll APIs.
This PR also updates and fixes existing IOURing tests which were not running locally because RocksDbIOUringEnable function wasn't defined and IOUring was disabled for those tests
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9777
Test Plan: Added new unit test
Reviewed By: anand1976
Differential Revision: D35254002
Pulled By: akankshamahajan15
fbshipit-source-id: 68e80054ffb14ae25c255920ebc6548ca5f130a1
Summary:
min_log_number_to_keep denotes that the WALs whose numbers are below
this value **will** be deleted by RocksDB.
delete_wals_before will be used by RocksDB if
track_and_verify_wals_in_manifest is set to true. During recovery,
RocksDB uses the info encoded in delete_wals_before to reconstruct its
knowledge about what WALs to expect existing.
If these two tags are not encoded in the same VersionEdit, then it's
possible for min_log_number_to_keep=100 to exist, but
delete_wals_before=100 to be lost due to power failure. Subsequent
recovery will delete 99.log. If the db crashes again, the following
recovery will expect to see 99.log since there is no
delete_wals_before=100 in the MANIFEST, but the WAL is already deleted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9766
Test Plan:
First of all, make check.
Second, format compatibility.
SHORT_TEST=1 ./tools/check_format_compatible.sh
Reviewed By: ltamasi
Differential Revision: D35203623
Pulled By: riversand963
fbshipit-source-id: 45623fc4b4b50d299d5e0f9559a3a4c5e9522c8f
Summary:
In making `SstFileMetaData` inherit from `FileStorageInfo`, I
overlooked setting some `FileStorageInfo` fields when then default
`SstFileMetaData()` ctor is used. This affected `GetLiveFilesMetaData()`.
Also removed some buggy `static_cast<size_t>`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9769
Test Plan: Updated tests
Reviewed By: jay-zhuang
Differential Revision: D35220383
Pulled By: pdillinger
fbshipit-source-id: 05b4ee468258dbd3699517e1124838bf405fe7f8
Summary:
After commit [d642c60](d642c60bdc), the stats `READ_BLOCK_COMPACTION_MICROS` cannot record any compaction read duration, and it always report zero.
This PR targets to distinguish `READ_BLOCK_COMPACTION_MICROS` with `READ_BLOCK_GET_MICROS` so that `READ_BLOCK_COMPACTION_MICROS` could record the correct stats.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9722
Reviewed By: ajkr
Differential Revision: D35021870
Pulled By: jay-zhuang
fbshipit-source-id: f1a804994265e51465de64c2a08f2e0eeb6fc5a3
Summary:
Although ColumnFamilySet comments say that DB mutex can be
freed during iteration, as long as you hold a ref while releasing DB
mutex, this is not quite true because UnrefAndTryDelete might delete cfd
right before it is needed to get ->next_ for the next iteration of the
loop.
This change solves the problem by making a wrapper class that makes such
iteration easier while handling the tricky details of UnrefAndTryDelete
on the previous cfd only after getting next_ in operator++.
FreeDeadColumnFamilies should already have been obsolete; this removes
it for good. Similarly, ColumnFamilySet::iterator doesn't need to check
for cfd with 0 refs, because those are immediately deleted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9730
Test Plan:
was reported with ASAN on unit tests like
DBLogicalBlockSizeCacheTest.CreateColumnFamily (very rare); keep watching
Reviewed By: ltamasi
Differential Revision: D35038143
Pulled By: pdillinger
fbshipit-source-id: 0a5478d5be96c135343a00603711b7df43ae19c9
Summary:
This updates main branch with a HISTORY update going into
7.1.fb branch before tagging 7.1.0.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9746
Test Plan: HISTORY.md only
Reviewed By: ajkr, hx235
Differential Revision: D35099194
Pulled By: pdillinger
fbshipit-source-id: b74ea8b626118dac235e387038420829850b8da2
Summary:
There is a race condition if WAL tracking in the MANIFEST is enabled in a database that disables 2PC.
The race condition is between two background flush threads trying to install flush results to the MANIFEST.
Consider an example database with two column families: "default" (cfd0) and "cf1" (cfd1). Initially,
both column families have one mutable (active) memtable whose data backed by 6.log.
1. Trigger a manual flush for "cf1", creating a 7.log
2. Insert another key to "default", and trigger flush for "default", creating 8.log
3. BgFlushThread1 finishes writing 9.sst
4. BgFlushThread2 finishes writing 10.sst
```
Time BgFlushThread1 BgFlushThread2
| mutex_.Lock()
| precompute min_wal_to_keep as 6
| mutex_.Unlock()
| mutex_.Lock()
| precompute min_wal_to_keep as 6
| join MANIFEST write queue and mutex_.Unlock()
| write to MANIFEST
| mutex_.Lock()
| cfd1->log_number = 7
| Signal bg_flush_2 and mutex_.Unlock()
| wake up and mutex_.Lock()
| cfd0->log_number = 8
| FindObsoleteFiles() with job_context->log_number == 7
| mutex_.Unlock()
| PurgeObsoleteFiles() deletes 6.log
V
```
As shown in the above, BgFlushThread2 thinks that the min wal to keep is 6.log because "cf1" has unflushed data in 6.log (cf1.log_number=6).
Similarly, BgThread1 thinks that min wal to keep is also 6.log because "default" has unflushed data (default.log_number=6).
No WAL deletion will be written to MANIFEST because 6 is equal to `versions_->wals_.min_wal_number_to_keep`,
due to https://github.com/facebook/rocksdb/blob/7.1.fb/db/memtable_list.cc#L513:L514.
The bg flush thread that finishes last will perform file purging. `job_context.log_number` will be evaluated as 7, i.e.
the min wal that contains unflushed data, causing 6.log to be deleted. However, MANIFEST thinks 6.log should still exist.
If you close the db at this point, you won't be able to re-open it if `track_and_verify_wal_in_manifest` is true.
We must handle the case of multiple bg flush threads, and it is difficult for one bg flush thread to know
the correct min wal number until the other bg flush threads have finished committing to the manifest and updated
the `cfd::log_number`.
To fix this issue, we rename an existing variable `min_log_number_to_keep_2pc` to `min_log_number_to_keep`,
and use it to track WAL file deletion in non-2pc mode as well.
This variable is updated only 1) during recovery with mutex held, or 2) in the MANIFEST write thread.
`min_log_number_to_keep` means RocksDB will delete WALs below it, although there may be WALs
above it which are also obsolete. Formally, we will have [min_wal_to_keep, max_obsolete_wal]. During recovery, we
make sure that only WALs above max_obsolete_wal are checked and added back to `alive_log_files_`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9715
Test Plan:
```
make check
```
Also ran stress test below (with asan) to make sure it completes successfully.
```
TEST_TMPDIR=/dev/shm/rocksdb OPT=-g ASAN_OPTIONS=disable_coredump=0 \
CRASH_TEST_EXT_ARGS=--compression_type=zstd SKIP_FORMAT_BUCK_CHECKS=1 \
make J=52 -j52 blackbox_asan_crash_test
```
Reviewed By: ltamasi
Differential Revision: D34984412
Pulled By: riversand963
fbshipit-source-id: c7b21a8d84751bb55ea79c9f387103d21b231005
Summary:
Bloom filters generated by pre-7.0 releases are not read by
7.0.x releases (and vice-versa) due to changes to FilterPolicy::Name()
in https://github.com/facebook/rocksdb/issues/9590. This can severely impact read performance and read I/O on
upgrade or downgrade with existing DB, but not data correctness.
To fix, we go back using the old, unified name in SST metadata but (for
a while anyway) recognize the aliases that could be generated by early
7.0.x releases. This unfortunately requires a public API change to avoid
interfering with all the good changes from https://github.com/facebook/rocksdb/issues/9590, but the API change
only affects users with custom FilterPolicy, which should be very few.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9736
Test Plan:
manual
Generate DBs with
```
./db_bench.7.0 -db=/dev/shm/rocksdb.7.0 -bloom_bits=10 -cache_index_and_filter_blocks=1 -benchmarks=fillrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0
```
and similar. Compare with
```
for IMPL in 6.29 7.0 fixed; do for DB in 6.29 7.0 fixed; do echo "Testing $IMPL on $DB:"; ./db_bench.$IMPL -db=/dev/shm/rocksdb.$DB -use_existing_db -readonly -bloom_bits=10 -benchmarks=readrandom -num=10000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -duration=10 2>&1 | grep micros/op; done; done
```
Results:
```
Testing 6.29 on 6.29:
readrandom : 34.381 micros/op 29085 ops/sec; 3.2 MB/s (291999 of 291999 found)
Testing 6.29 on 7.0:
readrandom : 190.443 micros/op 5249 ops/sec; 0.6 MB/s (52999 of 52999 found)
Testing 6.29 on fixed:
readrandom : 40.148 micros/op 24907 ops/sec; 2.8 MB/s (249999 of 249999 found)
Testing 7.0 on 6.29:
readrandom : 229.430 micros/op 4357 ops/sec; 0.5 MB/s (43999 of 43999 found)
Testing 7.0 on 7.0:
readrandom : 33.348 micros/op 29986 ops/sec; 3.3 MB/s (299999 of 299999 found)
Testing 7.0 on fixed:
readrandom : 152.734 micros/op 6546 ops/sec; 0.7 MB/s (65999 of 65999 found)
Testing fixed on 6.29:
readrandom : 32.024 micros/op 31224 ops/sec; 3.5 MB/s (312999 of 312999 found)
Testing fixed on 7.0:
readrandom : 33.990 micros/op 29390 ops/sec; 3.3 MB/s (294999 of 294999 found)
Testing fixed on fixed:
readrandom : 28.714 micros/op 34825 ops/sec; 3.9 MB/s (348999 of 348999 found)
```
Just paying attention to order of magnitude of ops/sec (short test
durations, lots of noise), it's clear that with the fix we can read <= 6.29
& >= 7.0 at full speed, where neither 6.29 nor 7.0 can on both. And 6.29
release can properly read fixed DB at full speed.
Reviewed By: siying, ajkr
Differential Revision: D35057844
Pulled By: pdillinger
fbshipit-source-id: a46893a6af4bf084375ebe4728066d00eb08f050
Summary:
In FilePrefetchBuffer if reads are sequential, after prefetching call ReadAsync API to prefetch data asynchronously so that in next prefetching data will be available. Data prefetched asynchronously will be readahead_size/2. It uses two buffers, one for synchronous prefetching and one for asynchronous. In case, the data is overlapping, the data is copied from both buffers to third buffer to make it continuous.
This feature is under ReadOptions::async_io and is under experimental.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9674
Test Plan:
1. Add new unit tests
2. Run **db_stress** to make sure nothing crashes.
- Normal prefetch without `async_io` ran successfully:
```
export CRASH_TEST_EXT_ARGS=" --async_io=0"
make crash_test -j
```
3. **Run Regressions**.
i) Main branch without any change for normal prefetching with async_io disabled:
```
./db_bench -db=/tmp/prefix_scan_prefetch_main -benchmarks="fillseq" -key_size=32 -value_size=512 -num=5000000 -
use_direct_io_for_flush_and_compaction=true -target_file_size_base=16777216
```
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_main -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.0
Date: Thu Mar 17 13:11:34 2022
CPU: 24 * Intel Core Processor (Broadwell)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_main]
seekrandom : 483618.390 micros/op 2 ops/sec; 338.9 MB/s (249 of 249 found)
```
ii) normal prefetching after changes with async_io disable:
```
./db_bench -use_existing_db=true -db=/tmp/prefix_scan_prefetch_withchange -benchmarks="seekrandom" -key_size=32 -value_size=512 -num=5000000 -use_direct_reads=true -seek_nexts=327680 -duration=120 -ops_between_duration_checks=1
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB: version 7.0
Date: Thu Mar 17 14:11:31 2022
CPU: 24 * Intel Core Processor (Broadwell)
CPUCache: 16384 KB
Keys: 32 bytes each (+ 0 bytes user-defined timestamp)
Values: 512 bytes each (256 bytes after compression)
Entries: 5000000
Prefix: 0 bytes
Keys per prefix: 0
RawSize: 2594.0 MB (estimated)
FileSize: 1373.3 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: Snappy
Compression sampling rate: 0
Memtablerep: SkipListFactory
Perf Level: 1
------------------------------------------------
DB path: [/tmp/prefix_scan_prefetch_withchange]
seekrandom : 471347.227 micros/op 2 ops/sec; 348.1 MB/s (255 of 255 found)
```
Reviewed By: anand1976
Differential Revision: D34731543
Pulled By: akankshamahajan15
fbshipit-source-id: 8e23aa93453d5fe3c672b9231ad582f60207937f
Summary:
The goal of this change is to allow changes to the "current" (in
FileSystem) file temperatures to feed back into DB metadata, so that
they can inform decisions and stats reporting. In part because of
modular code factoring, it doesn't seem easy to do this automagically,
where opening an SST file and observing current Temperature different
from expected would trigger a change in metadata and DB manifest write
(essentially giving the deep read path access to the write path). It is also
difficult to do this while the DB is open because of the limitations of
LogAndApply.
This change allows updating file temperature metadata on a closed DB
using an experimental utility function UpdateManifestForFilesState()
or `ldb update_manifest --update_temperatures`. This should suffice for
"migration" scenarios where outside tooling has placed or re-arranged DB
files into a (different) tiered configuration without going through
RocksDB itself (currently, only compaction can change temperature
metadata).
Some details:
* Refactored and added unit test for `ldb unsafe_remove_sst_file` because
of shared functionality
* Pulled in autovector.h changes from https://github.com/facebook/rocksdb/issues/9546 to fix SuperVersionContext
move constructor (related to an older draft of this change)
Possible follow-up work:
* Support updating manifest with file checksums, such as when a
new checksum function is used and want existing DB metadata updated
for it.
* It's possible that for some repair scenarios, lighter weight than
full repair, we might want to support UpdateManifestForFilesState() to
modify critical file details like size or checksum using same
algorithm. But let's make sure these are differentiated from modifying
file details in ways that don't suspect corruption (or require extreme
trust).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9683
Test Plan: unit tests added
Reviewed By: jay-zhuang
Differential Revision: D34798828
Pulled By: pdillinger
fbshipit-source-id: cfd83e8fb10761d8c9e7f9c020d68c9106a95554
Summary:
Fix and enhance the background error recovery logic to handle the
following situations -
1. Background read errors during flush/compaction (previously was
resulting in unrecoverable state)
2. Fix auto recovery failure on read/write errors during atomic flush.
It was failing due to a bug in setting the resuming_from_bg_err variable
in AtomicFlushMemTablesToOutputFiles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9679
Test Plan: Add new unit tests in error_handler_fs_test
Reviewed By: riversand963
Differential Revision: D34770097
Pulled By: anand1976
fbshipit-source-id: 136da973a28d684b9c74bdf668519b0cbbbe1742
Summary:
In https://github.com/facebook/rocksdb/issues/9659, when `DisableManualCompaction()` is issued, the foreground
manual compaction thread does not have to wait background compaction
thread to finish. Which could be a problem that the user re-enable
manual compaction with `EnableManualCompaction()`, it may re-enable the
BG compaction which supposed be cancelled.
This patch makes the FG compaction wait on
`manual_compaction_state.done`, which either be set by BG compaction or
Unschedule callback. Then when FG manual compaction thread returns, it
should not have BG compaction running. So shared_ptr is no longer needed
for `manual_compaction_state`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9694
Test Plan: a StressTest and unittest
Reviewed By: ajkr
Differential Revision: D34885472
Pulled By: jay-zhuang
fbshipit-source-id: e6476175b43e8c59cd49f5c09241036a0716c274
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9686
According to https://www.cplusplus.com/reference/deque/deque/back/,
"
The container is accessed (neither the const nor the non-const versions modify the container).
The last element is potentially accessed or modified by the caller. Concurrently accessing or modifying other elements is safe.
"
Also according to https://www.cplusplus.com/reference/deque/deque/pop_front/,
"
The container is modified.
The first element is modified. Concurrently accessing or modifying other elements is safe (although see iterator validity above).
"
In RocksDB, we never pop the last element of `DBImpl::alive_log_files_`. We have been
exploiting this fact and the above two properties when ensuring correctness when
`DBImpl::alive_log_files_` may be accessed concurrently. Specifically, it can be accessed
in the write path when db mutex is released. Sometimes, the log_mute_ is held. It can also be accessed in `FindObsoleteFiles()`
when db mutex is always held. It can also be accessed
during recovery when db mutex is also held.
Given the fact that we never pop the last element of alive_log_files_, we currently do not
acquire additional locks when accessing it in `WriteToWAL()` as follows
```
alive_log_files_.back().AddSize(log_entry.size());
```
This is problematic.
Check source code of deque.h
```
back() _GLIBCXX_NOEXCEPT
{
__glibcxx_requires_nonempty();
...
}
pop_front() _GLIBCXX_NOEXCEPT
{
...
if (this->_M_impl._M_start._M_cur
!= this->_M_impl._M_start._M_last - 1)
{
...
++this->_M_impl._M_start._M_cur;
}
...
}
```
`back()` will actually call `__glibcxx_requires_nonempty()` first.
If `__glibcxx_requires_nonempty()` is enabled and not an empty macro,
it will call `empty()`
```
bool empty() {
return this->_M_impl._M_finish == this->_M_impl._M_start;
}
```
You can see that it will access `this->_M_impl._M_start`, racing with `pop_front()`.
Therefore, TSAN will actually catch the bug in this case.
To be able to use TSAN on our library and unit tests, we should always coordinate
concurrent accesses to STL containers properly.
We need to pass information about db mutex and log mutex into `WriteToWAL()`, otherwise
it's impossible to know which mutex to acquire inside the function.
To fix this, we can catch the tail of `alive_log_files_` by reference, so that we do not have to call `back()` in `WriteToWAL()`.
Reviewed By: pdillinger
Differential Revision: D34780309
fbshipit-source-id: 1def9821f0c437f2736c6a26445d75890377889b
Yanqin Jin