Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
util/ means for lower level libraries, so it's a good idea to move the files which requires knowledge to DB out. Create a file/ and move some files there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5375
Differential Revision: D15550935
Pulled By: siying
fbshipit-source-id: 61a9715dcde5386eebfb43e93f847bba1ae0d3f2
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary: For the CURRENT file forged during checkpoint, we were forgetting to `fsync` or `fdatasync` it after its creation. This PR fixes it.
Differential Revision: D9525939
Pulled By: ajkr
fbshipit-source-id: a505483644026ee3f501cfc0dcbe74832165b2e3
Summary:
- Attempt to clean the checkpoint staging directory before starting a checkpoint. It was already cleaned up at the end of checkpoint. But it wasn't cleaned up in the edge case where the process crashed while staging checkpoint files.
- Attempt to clean the checkpoint directory before calling `Checkpoint::Create` in `db_stress`. This handles the case where checkpoint directory was created by a previous `db_stress` run but the process crashed before cleaning it up.
- Use `DestroyDB` for cleaning checkpoint directory since a checkpoint is a DB.
Closes https://github.com/facebook/rocksdb/pull/4035
Reviewed By: yiwu-arbug
Differential Revision: D8580223
Pulled By: ajkr
fbshipit-source-id: 28c667400e249fad0fdedc664b349031b7b61599
Summary:
Currently log_writer->AddRecord in WriteImpl is protected from concurrent calls via FlushWAL only if two_write_queues_ option is set. The patch fixes the problem by i) skip log_writer->AddRecord in FlushWAL if manual_wal_flush is not set, ii) protects log_writer->AddRecord in WriteImpl via log_write_mutex_ if manual_wal_flush_ is set but two_write_queues_ is not.
Fixes#3599
Closes https://github.com/facebook/rocksdb/pull/3656
Differential Revision: D7405608
Pulled By: maysamyabandeh
fbshipit-source-id: d6cc265051c77ae49c7c6df4f427350baaf46934
Summary:
`Writer::WriteBuffer` was always called at the beginning of checkpoint/backup. But that log writer has no internal synchronization, which meant the same buffer could be flushed twice in a race condition case, causing a WAL entry to be duplicated. Then subsequent WAL entries would be at unexpected offsets, causing the 32KB block boundaries to be overlapped and manifesting as a corruption.
This PR fixes the behavior to only use `WriteBuffer` (via `FlushWAL`) in checkpoint/backup when manual WAL flush is enabled. In that case, users are responsible for providing synchronization between WAL flushes. We can also consider removing the call entirely.
Closes https://github.com/facebook/rocksdb/pull/3603
Differential Revision: D7277447
Pulled By: ajkr
fbshipit-source-id: 1b15bd7fd930511222b075418c10de0aaa70a35a
Summary:
- made `CreateCheckpoint` properly return `InvalidArgument` when called with an empty directory. Previously it triggered an assertion failure due to a bug in the logic.
- made `ldb` set empty `checkpoint_dir` if that's what the user specifies, so that we can use it to properly test `CreateCheckpoint` in the future.
Differential Revision: D6874562
fbshipit-source-id: dcc1bd41768261d9338987fa7711444289707ed7
Summary:
previously if `checkpoint_dir` contained a trailing slash, we'd attempt to create the `.tmp` directory under `checkpoint_dir` due to simply concatenating `checkpoint_dir + ".tmp"`. This failed because `checkpoint_dir` hadn't been created yet and our directory creation is non-recursive. This PR fixes the issue by always creating the `.tmp` directory in the same parent as `checkpoint_dir` by stripping trailing slashes before concatenating.
Closes https://github.com/facebook/rocksdb/pull/3275
Differential Revision: D6574952
Pulled By: ajkr
fbshipit-source-id: a6daa6777a901eac2460cd0140c9515f7241aefc
Summary:
This reverts the previous commit 1d7048c598, which broke the build.
Did a `git revert 1d7048c`.
Closes https://github.com/facebook/rocksdb/pull/2627
Differential Revision: D5476473
Pulled By: sagar0
fbshipit-source-id: 4756ff5c0dfc88c17eceb00e02c36176de728d06
Summary: This uses `clang-tidy` to comment out unused parameters (in functions, methods and lambdas) in fbcode. Cases that the tool failed to handle are fixed manually.
Reviewed By: igorsugak
Differential Revision: D5454343
fbshipit-source-id: 5dee339b4334e25e963891b519a5aa81fbf627b2
Summary:
Throughput: 46k tps in our sysbench settings (filling the details later)
The idea is to have the simplest change that gives us a reasonable boost
in 2PC throughput.
Major design changes:
1. The WAL file internal buffer is not flushed after each write. Instead
it is flushed before critical operations (WAL copy via fs) or when
FlushWAL is called by MySQL. Flushing the WAL buffer is also protected
via mutex_.
2. Use two sequence numbers: last seq, and last seq for write. Last seq
is the last visible sequence number for reads. Last seq for write is the
next sequence number that should be used to write to WAL/memtable. This
allows to have a memtable write be in parallel to WAL writes.
3. BatchGroup is not used for writes. This means that we can have
parallel writers which changes a major assumption in the code base. To
accommodate for that i) allow only 1 WriteImpl that intends to write to
memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes
come via group commit phase which is serial anyway, ii) make all the
parts in the code base that assumed to be the only writer (via
EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are
protected via a stat_mutex_.
Note: the first commit has the approach figured out but is not clean.
Submitting the PR anyway to get the early feedback on the approach. If
we are ok with the approach I will go ahead with this updates:
0) Rebase with Yi's pipelining changes
1) Currently batching is disabled by default to make sure that it will be
consistent with all unit tests. Will make this optional via a config.
2) A couple of unit tests are disabled. They need to be updated with the
serial commit of 2PC taken into account.
3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires
releasing mutex_ beforehand (the same way EnterUnbatched does). This
needs to be cleaned up.
Closes https://github.com/facebook/rocksdb/pull/2345
Differential Revision: D5210732
Pulled By: maysamyabandeh
fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
Summary:
These code paths forked when checkpoint was introduced by copy/pasting the core backup logic. Over time they diverged and bug fixes were sometimes applied to one but not the other (like fix to include all relevant WALs for 2PC), or it required extra effort to fix both (like fix to forge CURRENT file). This diff reunites the code paths by extracting the core logic into a function, CreateCustomCheckpoint(), that is customizable via callbacks to implement both checkpoint and backup.
Related changes:
- flush_before_backup is now forcibly enabled when 2PC is enabled
- Extracted CheckpointImpl class definition into a header file. This is so the function, CreateCustomCheckpoint(), can be called by internal rocksdb code but not exposed to users.
- Implemented more functions in DummyDB/DummyLogFile (in backupable_db_test.cc) that are used by CreateCustomCheckpoint().
Closes https://github.com/facebook/rocksdb/pull/1932
Differential Revision: D4622986
Pulled By: ajkr
fbshipit-source-id: 157723884236ee3999a682673b64f7457a7a0d87
Summary:
It is confusing to have auto_roll_logger to stay under db/, which has nothing to do with database. Move filename together as it is a dependency.
Closes https://github.com/facebook/rocksdb/pull/2080
Differential Revision: D4821141
Pulled By: siying
fbshipit-source-id: ca7d768
Summary:
Add a parameter to Checkpoint::CreateCheckpoint() so that flush can be skipped if total log file size is within a threshold.
Closes https://github.com/facebook/rocksdb/pull/1993
Differential Revision: D4719842
Pulled By: siying
fbshipit-source-id: 4f9d9e1
Summary:
File copying happens when creating checkpoints and bulkloading files from different FS partition. We should fsync the files when copying them to guarantee durability. A side effect will be that the dirty pages in file system buffers won't grow too large.
Closes https://github.com/facebook/rocksdb/pull/1728
Differential Revision: D4371083
Pulled By: siying
fbshipit-source-id: 579e14c
Summary:
If 2PC is enabled, checkpoint may not copy previous log files that contain uncommitted prepare records. In this diff we keep those files.
Closes https://github.com/facebook/rocksdb/pull/1724
Differential Revision: D4368319
Pulled By: siying
fbshipit-source-id: cc2c746
Summary: Backup options file to private directory
Test Plan:
backupable_db_test.cc, BackupOptions
Modify DB options by calling OpenDB for 3 times. Check the latest options file is in the right place. Also check no redundent files are backuped.
Reviewers: andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D59373
Summary:
This fixes a similar issue as D54711: "CURRENT" file can mutate between
GetLiveFiles() and copy to the tmp directory, in which case it would reference
the wrong manifest filename. To fix this, I forge the "CURRENT" file such that
it simply contains the filename for the manifest returned by GetLiveFiles().
- Changed CreateCheckpoint() to forge current file
- Added CreateFile() utility function
- Added test case that rolls manifest during checkpoint creation
Test Plan:
$ ./checkpoint_test
Reviewers: sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55065
Summary: Add new CheckFileExists method. Considered changing the FileExists api but didn't want to break anyone's builds.
Test Plan: unit tests
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42003
Summary:
When there are multiple column families, the flush in
GetLiveFiles is not atomic, so that there are entries in the wal files
which are needed to get a consisten RocksDB. We now add the log files to
the checkpoint.
Test Plan:
CheckpointCF - This test forces more data to be written to
the other column families after the flush of the first column family but
before the second.
Reviewers: igor, yhchiang, IslamAbdelRahman, anthony, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40323
Summary:
When using latest clang (3.6 or 3.7/trunck) rocksdb is failing with many errors. Almost all of them are missing override errors. This diff adds missing override keyword. No manual changes.
Prerequisites: bear and clang 3.5 build with extra tools
```lang=bash
% USE_CLANG=1 bear make all # generate a compilation database http://clang.llvm.org/docs/JSONCompilationDatabase.html
% clang-modernize -p . -include . -add-override
% make format
```
Test Plan:
Make sure all tests are passing.
```lang=bash
% #Use default fb code clang.
% make check
```
Verify less error and no missing override errors.
```lang=bash
% # Have trunk clang present in path.
% ROCKSDB_NO_FBCODE=1 CC=clang CXX=clang++ make
```
Reviewers: igor, kradhakrishnan, rven, meyering, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34077
Zhongyi Xie