Summary: Compaction picker and internal key comparator are different for each column family (not global), so they should live in ColumnFamilyData
Test Plan: make check
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15801
Summary:
VersionSet::next_file_number_ is always assumed to be strictly greater than VersionSet::log_number_. In our new recovery code, we artificially set log_number_ to be (log_number + 1), so that once we flush, we don't recover from the same log file again (this is important because of merge operator non-idempotence)
When we set VersionSet::log_number_ to (log_number + 1), we also have to mark that file number used, such that next_file_number_ is increased to a legal level. Otherwise, VersionSet might assert.
This has not be a problem so far because here's what happens:
1. assume next_file_number is 5, we're recovering log_number 10
2. in DBImpl::Recover() we call MarkFileNumberUsed with 10. This will set VersionSet::next_file_number_ to 11.
3. If there are some updates, we will call WriteTable0ForRecovery(), which will use file number 11 as a new table file and advance VersionSet::next_file_number_ to 12.
4. When we LogAndApply() with log_number 11, assertion is true: assert(11 <= 12);
However, this was a lucky occurrence. Even though this diff doesn't cause a bug, I think the issue is important to fix.
Test Plan: In column families I have different recovery logic and this code path asserted. When adding MarkFileNumberUsed(log_number + 1) assert is gone.
Reviewers: dhruba, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15783
Summary: Removed default_cfd_ from all flush code paths. This means we can now flush memtables from arbitrary column families!
Test Plan: Added a new unit test
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15789
Summary: I didn't figure out the reason why the feature of zeroing out earlier sequence ID is disabled in universal compaction. I do see bottommost_level is set correctly. It should simply work if we remove the constraint of universal compaction.
Test Plan: make all check
Reviewers: haobo, dhruba, kailiu, igor
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15423
Summary: The default settings enable checksum verification on every read.
Test Plan: make check
Reviewers: haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15591
Summary:
Sometimes we iterate through column families, and unlock the mutex in the body of the iteration. While mutex is unlocked, some column family might be created or dropped. We need to be able to continue iterating through column families even though our current column family got dropped.
This diff implements circular linked lists that connect all column families. It then uses the link list to enable iterating through linked lists. Even if the column family is dropped, its next_ pointer still can be used to advance to another alive column family.
Test Plan: make check
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15603
Summary: Making room for write will be the hardest part of the column family implementation. For now, I just iterate through all column families and run MakeRoomForWrite() for every one.
Test Plan: make check does not complain
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15597
Summary:
In DBImpl we keep track of some statistics internally and expose them via GetProperty(). This diff encapsulates all the internal statistics into a class InternalStatisics. Most of it is copy/paste.
Apart from cleaning up db_impl.cc, this diff is also necessary for Column families, since every column family should have its own CompactionStats, MakeRoomForWrite-stall stats, etc. It's much easier to keep track of it in every column family if it's nicely encapsulated in its own class.
Test Plan: make check
Reviewers: dhruba, kailiu, haobo, sdong, emayanke
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15273
Summary: as title
Test Plan: unit test
Reviewers: haobo, igor, sdong, kailiu, dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15435
Summary: ColumnFamilyData grew a lot, there's much more data that it holds now. It makes more sense to encapsulate it better by making it a class.
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15579
Summary: When we drop the column family, we want to delete all the files from that column family.
Test Plan: make check
Reviewers: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15561
Summary: This one is big. It adds ability to write to and read from different column families (see the unit test). It also supports recovery of different column families from log, which was the hardest part to reason about. We need to make sure to never delete the log file which has unflushed data from any column family. To support that, I added another concept, which is versions_->MinLogNumber()
Test Plan: Added a unit test in column_family_test
Reviewers: dhruba, haobo, sdong, kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15537
Summary:
In new third-party release tool, `LIBNAME=<customized_library> make`
will not really change the LIBNAME.
However it's very odd that the same approach works with old third-party
release tools. I checked previous rocksdb version and both librocksdb.a
and librocksdb_debug.a were correctly generated and copied to the
right place.
Test Plan:
`LIBNAME=hello make -j32` generates hello.a
`make -j32` generates librocksdb.a
Reviewers: igor, sdong, haobo, dhruba
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15555
Summary: Change all occurrences of "rocksdb" to its canonical form "RocksDB".
Test Plan: N/A
Reviewers: igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15549
Summary:
* Add a change log for rocksdb releases.
* Remove the hacky parts of make_new_version.sh, which are either
no longer useful or will be done in our dedicated 3rd-party release
tool.
Test Plan: N/A
Reviewers: igor, haobo, sdong, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15543
Summary:
if it happens (randomly) to corrupt shared file in the test, then the
checksum will be inconsistent between meta files from different backup.
BackupEngine will then detect this issue and fail. But in reality, this
does not happen since the checksum is checked on every backup. So here,
only corrupt checksum of private file to let BackupEngine to construct
properly (but fail during restore).
Test Plan: run test with valgrind
Reviewers: igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15531
Summary:
I came across this while working on column families. CorruptionTest::RecoverWriteError threw a SIGSEG because the descriptor_log_->file() was nullptr. I'm not sure why it doesn't happen in master, but better safe than sorry.
@kailiu, can we get this in release, too?
Test Plan: make check
Reviewers: kailiu, dhruba, haobo
Reviewed By: haobo
CC: leveldb, kailiu
Differential Revision: https://reviews.facebook.net/D15513
Summary: I think it looks nicer. In RocksDB we have both styles, but I think that static method is the more common version.
Test Plan: backupable_db_test
Reviewers: ljin, benj, swk
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15519
Summary:
Lots of clients have problems with using StackableDB interface. It's nice to have BackupableDB as a layer on top of DB, but not necessary.
This diff exports BackupEngine, which can be used to create backups without forcing clients to use StackableDB interface.
Test Plan: backupable_db_test
Reviewers: dhruba, ljin, swk
Reviewed By: ljin
CC: leveldb, benj
Differential Revision: https://reviews.facebook.net/D15477
Summary: Keep checksum of each backuped file in meta file. When it restores these files, compute their checksum on the fly and compare against what is in the meta file. Fail the restore process if checksum mismatch.
Test Plan: unit test
Reviewers: haobo, igor, sdong, kailiu
Reviewed By: igor
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D15381
Summary:
Blocks in the transaction log are a fixed size, but the last block in the transaction log file is usually a partial block. When a new record is added after the reader hit the end of the file, a new physical record will be appended to the last block. ReadPhysicalRecord can only read full blocks and assumes that the file position indicator is aligned to the start of a block. If the reader is forced to read further by simply clearing the EOF flag, ReadPhysicalRecord will read a full block starting from somewhere in the middle of a real block, causing it to lose alignment and to have a partial physical record at the end of the read buffer. This will result in length mismatches and checksum failures. When the log file is tailed for replication this will cause the log iterator to become invalid, necessitating the creation of a new iterator which will have to read the log file from scratch.
This diff fixes this issue by reading the remaining portion of the last block we read from. This is done when the reader is forced to read further (UnmarkEOF is called).
Test Plan:
- Added unit tests
- Stress test (with replication). Check dbdir/LOG file for corruptions.
- Test on test tier
Reviewers: emayanke, haobo, dhruba
Reviewed By: haobo
CC: vamsi, sheki, dhruba, kailiu, igor
Differential Revision: https://reviews.facebook.net/D15249
Summary: This removes the default implementation of LogAndApply that applied the changed to the default column family by default. It is mostly simple reformatting.
Test Plan: make check
Reviewers: dhruba, kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15465
Summary: All memtables and immutable memtables are moved from DBImpl to ColumnFamilyData. For now, they are all referenced from default column family in DBImpl. It shouldn't be hard to get them from custom column family.
Test Plan: make check
Reviewers: dhruba, kailiu, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15459
Summary:
@dhruba, I'm not sure where we need to sync the directory. I implemented the function in Env() and added the dir sync just after we close the newly created file in the builder.
Should I also add FsyncDir() to new files that get created by a compaction?
Test Plan: Confirmed that FsyncDir is returning Status::OK()
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D14751
Summary: There is no reason to have functions NeedCompaction(), MaxCompactionScore() and MaxCompactionScoreLevel() in VersionSet, since they don't access any data in VersionSet.
Test Plan: make check
Reviewers: kailiu, haobo, sdong
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15333
ReduceNumberOfLevels had segmentation fault in WriteSnapshot() since we
didn't change the number of levels in VersionSet (we consider them
immutable from now on). This fixes the problem.
Summary: By removing some includes form options.h and reply on forward declaration, we can more easily reason the dependencies.
Test Plan: make all check
Reviewers: kailiu, haobo, igor, dhruba
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15411
Igor Canadi