|
|
|
// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
|
|
|
|
// This source code is licensed under both the GPLv2 (found in the
|
|
|
|
// COPYING file in the root directory) and Apache 2.0 License
|
|
|
|
// (found in the LICENSE.Apache file in the root directory).
|
|
|
|
//
|
|
|
|
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
|
|
|
|
// Use of this source code is governed by a BSD-style license that can be
|
|
|
|
// found in the LICENSE file. See the AUTHORS file for names of contributors.
|
|
|
|
#include "table/block_based/block_based_table_reader.h"
|
|
|
|
|
|
|
|
#include <algorithm>
|
|
|
|
#include <array>
|
|
|
|
#include <limits>
|
|
|
|
#include <string>
|
|
|
|
#include <utility>
|
|
|
|
#include <vector>
|
|
|
|
|
|
|
|
#include "cache/sharded_cache.h"
|
|
|
|
|
|
|
|
#include "db/dbformat.h"
|
Introduce FullMergeV2 (eliminate memcpy from merge operators)
Summary:
This diff update the code to pin the merge operator operands while the merge operation is done, so that we can eliminate the memcpy cost, to do that we need a new public API for FullMerge that replace the std::deque<std::string> with std::vector<Slice>
This diff is stacked on top of D56493 and D56511
In this diff we
- Update FullMergeV2 arguments to be encapsulated in MergeOperationInput and MergeOperationOutput which will make it easier to add new arguments in the future
- Replace std::deque<std::string> with std::vector<Slice> to pass operands
- Replace MergeContext std::deque with std::vector (based on a simple benchmark I ran https://gist.github.com/IslamAbdelRahman/78fc86c9ab9f52b1df791e58943fb187)
- Allow FullMergeV2 output to be an existing operand
```
[Everything in Memtable | 10K operands | 10 KB each | 1 operand per key]
DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=10000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000
[FullMergeV2]
readseq : 0.607 micros/op 1648235 ops/sec; 16121.2 MB/s
readseq : 0.478 micros/op 2091546 ops/sec; 20457.2 MB/s
readseq : 0.252 micros/op 3972081 ops/sec; 38850.5 MB/s
readseq : 0.237 micros/op 4218328 ops/sec; 41259.0 MB/s
readseq : 0.247 micros/op 4043927 ops/sec; 39553.2 MB/s
[master]
readseq : 3.935 micros/op 254140 ops/sec; 2485.7 MB/s
readseq : 3.722 micros/op 268657 ops/sec; 2627.7 MB/s
readseq : 3.149 micros/op 317605 ops/sec; 3106.5 MB/s
readseq : 3.125 micros/op 320024 ops/sec; 3130.1 MB/s
readseq : 4.075 micros/op 245374 ops/sec; 2400.0 MB/s
```
```
[Everything in Memtable | 10K operands | 10 KB each | 10 operand per key]
DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=1000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000
[FullMergeV2]
readseq : 3.472 micros/op 288018 ops/sec; 2817.1 MB/s
readseq : 2.304 micros/op 434027 ops/sec; 4245.2 MB/s
readseq : 1.163 micros/op 859845 ops/sec; 8410.0 MB/s
readseq : 1.192 micros/op 838926 ops/sec; 8205.4 MB/s
readseq : 1.250 micros/op 800000 ops/sec; 7824.7 MB/s
[master]
readseq : 24.025 micros/op 41623 ops/sec; 407.1 MB/s
readseq : 18.489 micros/op 54086 ops/sec; 529.0 MB/s
readseq : 18.693 micros/op 53495 ops/sec; 523.2 MB/s
readseq : 23.621 micros/op 42335 ops/sec; 414.1 MB/s
readseq : 18.775 micros/op 53262 ops/sec; 521.0 MB/s
```
```
[Everything in Block cache | 10K operands | 10 KB each | 1 operand per key]
[FullMergeV2]
$ DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions
readseq : 14.741 micros/op 67837 ops/sec; 663.5 MB/s
readseq : 1.029 micros/op 971446 ops/sec; 9501.6 MB/s
readseq : 0.974 micros/op 1026229 ops/sec; 10037.4 MB/s
readseq : 0.965 micros/op 1036080 ops/sec; 10133.8 MB/s
readseq : 0.943 micros/op 1060657 ops/sec; 10374.2 MB/s
[master]
readseq : 16.735 micros/op 59755 ops/sec; 584.5 MB/s
readseq : 3.029 micros/op 330151 ops/sec; 3229.2 MB/s
readseq : 3.136 micros/op 318883 ops/sec; 3119.0 MB/s
readseq : 3.065 micros/op 326245 ops/sec; 3191.0 MB/s
readseq : 3.014 micros/op 331813 ops/sec; 3245.4 MB/s
```
```
[Everything in Block cache | 10K operands | 10 KB each | 10 operand per key]
DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10-operands-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions
[FullMergeV2]
readseq : 24.325 micros/op 41109 ops/sec; 402.1 MB/s
readseq : 1.470 micros/op 680272 ops/sec; 6653.7 MB/s
readseq : 1.231 micros/op 812347 ops/sec; 7945.5 MB/s
readseq : 1.091 micros/op 916590 ops/sec; 8965.1 MB/s
readseq : 1.109 micros/op 901713 ops/sec; 8819.6 MB/s
[master]
readseq : 27.257 micros/op 36687 ops/sec; 358.8 MB/s
readseq : 4.443 micros/op 225073 ops/sec; 2201.4 MB/s
readseq : 5.830 micros/op 171526 ops/sec; 1677.7 MB/s
readseq : 4.173 micros/op 239635 ops/sec; 2343.8 MB/s
readseq : 4.150 micros/op 240963 ops/sec; 2356.8 MB/s
```
Test Plan: COMPILE_WITH_ASAN=1 make check -j64
Reviewers: yhchiang, andrewkr, sdong
Reviewed By: sdong
Subscribers: lovro, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57075
8 years ago
|
|
|
#include "db/pinned_iterators_manager.h"
|
|
|
|
#include "file/file_prefetch_buffer.h"
|
|
|
|
#include "file/file_util.h"
|
|
|
|
#include "file/random_access_file_reader.h"
|
|
|
|
#include "monitoring/perf_context_imp.h"
|
|
|
|
#include "options/options_helper.h"
|
|
|
|
#include "rocksdb/cache.h"
|
|
|
|
#include "rocksdb/comparator.h"
|
|
|
|
#include "rocksdb/env.h"
|
Introduce a new storage specific Env API (#5761)
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
5 years ago
|
|
|
#include "rocksdb/file_system.h"
|
|
|
|
#include "rocksdb/filter_policy.h"
|
|
|
|
#include "rocksdb/iterator.h"
|
|
|
|
#include "rocksdb/options.h"
|
|
|
|
#include "rocksdb/statistics.h"
|
|
|
|
#include "rocksdb/table.h"
|
|
|
|
#include "rocksdb/table_properties.h"
|
|
|
|
#include "table/block_based/binary_search_index_reader.h"
|
|
|
|
#include "table/block_based/block.h"
|
|
|
|
#include "table/block_based/block_based_filter_block.h"
|
|
|
|
#include "table/block_based/block_based_table_factory.h"
|
|
|
|
#include "table/block_based/block_based_table_iterator.h"
|
|
|
|
#include "table/block_based/block_prefix_index.h"
|
|
|
|
#include "table/block_based/filter_block.h"
|
|
|
|
#include "table/block_based/full_filter_block.h"
|
|
|
|
#include "table/block_based/hash_index_reader.h"
|
|
|
|
#include "table/block_based/partitioned_filter_block.h"
|
|
|
|
#include "table/block_based/partitioned_index_reader.h"
|
|
|
|
#include "table/block_fetcher.h"
|
|
|
|
#include "table/format.h"
|
|
|
|
#include "table/get_context.h"
|
|
|
|
#include "table/internal_iterator.h"
|
|
|
|
#include "table/meta_blocks.h"
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
6 years ago
|
|
|
#include "table/multiget_context.h"
|
|
|
|
#include "table/persistent_cache_helper.h"
|
|
|
|
#include "table/sst_file_writer_collectors.h"
|
|
|
|
#include "table/two_level_iterator.h"
|
|
|
|
|
|
|
|
#include "monitoring/perf_context_imp.h"
|
|
|
|
#include "port/lang.h"
|
|
|
|
#include "test_util/sync_point.h"
|
|
|
|
#include "util/coding.h"
|
|
|
|
#include "util/crc32c.h"
|
|
|
|
#include "util/stop_watch.h"
|
|
|
|
#include "util/string_util.h"
|
|
|
|
|
|
|
|
namespace ROCKSDB_NAMESPACE {
|
|
|
|
|
|
|
|
extern const uint64_t kBlockBasedTableMagicNumber;
|
|
|
|
extern const std::string kHashIndexPrefixesBlock;
|
|
|
|
extern const std::string kHashIndexPrefixesMetadataBlock;
|
|
|
|
|
|
|
|
|
|
|
|
// Found that 256 KB readahead size provides the best performance, based on
|
|
|
|
// experiments, for auto readahead. Experiment data is in PR #3282.
|
|
|
|
const size_t BlockBasedTable::kMaxAutoReadaheadSize = 256 * 1024;
|
|
|
|
|
|
|
|
BlockBasedTable::~BlockBasedTable() {
|
|
|
|
delete rep_;
|
|
|
|
}
|
|
|
|
|
|
|
|
std::atomic<uint64_t> BlockBasedTable::next_cache_key_id_(0);
|
|
|
|
|
|
|
|
template <typename TBlocklike>
|
|
|
|
class BlocklikeTraits;
|
|
|
|
|
|
|
|
template <>
|
|
|
|
class BlocklikeTraits<BlockContents> {
|
|
|
|
public:
|
|
|
|
static BlockContents* Create(BlockContents&& contents,
|
|
|
|
size_t /* read_amp_bytes_per_bit */,
|
|
|
|
Statistics* /* statistics */,
|
|
|
|
bool /* using_zstd */,
|
|
|
|
const FilterPolicy* /* filter_policy */) {
|
|
|
|
return new BlockContents(std::move(contents));
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint32_t GetNumRestarts(const BlockContents& /* contents */) {
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
template <>
|
|
|
|
class BlocklikeTraits<ParsedFullFilterBlock> {
|
|
|
|
public:
|
|
|
|
static ParsedFullFilterBlock* Create(BlockContents&& contents,
|
|
|
|
size_t /* read_amp_bytes_per_bit */,
|
|
|
|
Statistics* /* statistics */,
|
|
|
|
bool /* using_zstd */,
|
|
|
|
const FilterPolicy* filter_policy) {
|
|
|
|
return new ParsedFullFilterBlock(filter_policy, std::move(contents));
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint32_t GetNumRestarts(const ParsedFullFilterBlock& /* block */) {
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
template <>
|
|
|
|
class BlocklikeTraits<Block> {
|
|
|
|
public:
|
|
|
|
static Block* Create(BlockContents&& contents, size_t read_amp_bytes_per_bit,
|
|
|
|
Statistics* statistics, bool /* using_zstd */,
|
|
|
|
const FilterPolicy* /* filter_policy */) {
|
|
|
|
return new Block(std::move(contents), read_amp_bytes_per_bit, statistics);
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint32_t GetNumRestarts(const Block& block) {
|
|
|
|
return block.NumRestarts();
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
template <>
|
|
|
|
class BlocklikeTraits<UncompressionDict> {
|
|
|
|
public:
|
|
|
|
static UncompressionDict* Create(BlockContents&& contents,
|
|
|
|
size_t /* read_amp_bytes_per_bit */,
|
|
|
|
Statistics* /* statistics */,
|
|
|
|
bool using_zstd,
|
|
|
|
const FilterPolicy* /* filter_policy */) {
|
|
|
|
return new UncompressionDict(contents.data, std::move(contents.allocation),
|
|
|
|
using_zstd);
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint32_t GetNumRestarts(const UncompressionDict& /* dict */) {
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
namespace {
|
|
|
|
// Read the block identified by "handle" from "file".
|
|
|
|
// The only relevant option is options.verify_checksums for now.
|
|
|
|
// On failure return non-OK.
|
|
|
|
// On success fill *result and return OK - caller owns *result
|
|
|
|
// @param uncompression_dict Data for presetting the compression library's
|
Shared dictionary compression using reference block
Summary:
This adds a new metablock containing a shared dictionary that is used
to compress all data blocks in the SST file. The size of the shared dictionary
is configurable in CompressionOptions and defaults to 0. It's currently only
used for zlib/lz4/lz4hc, but the block will be stored in the SST regardless of
the compression type if the user chooses a nonzero dictionary size.
During compaction, computes the dictionary by randomly sampling the first
output file in each subcompaction. It pre-computes the intervals to sample
by assuming the output file will have the maximum allowable length. In case
the file is smaller, some of the pre-computed sampling intervals can be beyond
end-of-file, in which case we skip over those samples and the dictionary will
be a bit smaller. After the dictionary is generated using the first file in a
subcompaction, it is loaded into the compression library before writing each
block in each subsequent file of that subcompaction.
On the read path, gets the dictionary from the metablock, if it exists. Then,
loads that dictionary into the compression library before reading each block.
Test Plan: new unit test
Reviewers: yhchiang, IslamAbdelRahman, cyan, sdong
Reviewed By: sdong
Subscribers: andrewkr, yoshinorim, kradhakrishnan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52287
9 years ago
|
|
|
// dictionary.
|
|
|
|
template <typename TBlocklike>
|
|
|
|
Status ReadBlockFromFile(
|
|
|
|
RandomAccessFileReader* file, FilePrefetchBuffer* prefetch_buffer,
|
|
|
|
const Footer& footer, const ReadOptions& options, const BlockHandle& handle,
|
|
|
|
std::unique_ptr<TBlocklike>* result, const ImmutableCFOptions& ioptions,
|
|
|
|
bool do_uncompress, bool maybe_compressed, BlockType block_type,
|
|
|
|
const UncompressionDict& uncompression_dict,
|
|
|
|
const PersistentCacheOptions& cache_options, size_t read_amp_bytes_per_bit,
|
|
|
|
MemoryAllocator* memory_allocator, bool for_compaction, bool using_zstd,
|
|
|
|
const FilterPolicy* filter_policy) {
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
assert(result);
|
|
|
|
|
|
|
|
BlockContents contents;
|
|
|
|
BlockFetcher block_fetcher(
|
|
|
|
file, prefetch_buffer, footer, options, handle, &contents, ioptions,
|
|
|
|
do_uncompress, maybe_compressed, block_type, uncompression_dict,
|
|
|
|
cache_options, memory_allocator, nullptr, for_compaction);
|
|
|
|
Status s = block_fetcher.ReadBlockContents();
|
|
|
|
if (s.ok()) {
|
|
|
|
result->reset(BlocklikeTraits<TBlocklike>::Create(
|
|
|
|
std::move(contents), read_amp_bytes_per_bit, ioptions.statistics,
|
|
|
|
using_zstd, filter_policy));
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
}
|
|
|
|
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Delete the entry resided in the cache.
|
|
|
|
template <class Entry>
|
|
|
|
void DeleteCachedEntry(const Slice& /*key*/, void* value) {
|
|
|
|
auto entry = reinterpret_cast<Entry*>(value);
|
|
|
|
delete entry;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Release the cached entry and decrement its ref count.
|
|
|
|
// Do not force erase
|
|
|
|
void ReleaseCachedEntry(void* arg, void* h) {
|
|
|
|
Cache* cache = reinterpret_cast<Cache*>(arg);
|
|
|
|
Cache::Handle* handle = reinterpret_cast<Cache::Handle*>(h);
|
|
|
|
cache->Release(handle, false /* force_erase */);
|
|
|
|
}
|
|
|
|
|
|
|
|
// For hash based index, return true if prefix_extractor and
|
|
|
|
// prefix_extractor_block mismatch, false otherwise. This flag will be used
|
|
|
|
// as total_order_seek via NewIndexIterator
|
|
|
|
bool PrefixExtractorChanged(const TableProperties* table_properties,
|
|
|
|
const SliceTransform* prefix_extractor) {
|
|
|
|
// BlockBasedTableOptions::kHashSearch requires prefix_extractor to be set.
|
|
|
|
// Turn off hash index in prefix_extractor is not set; if prefix_extractor
|
|
|
|
// is set but prefix_extractor_block is not set, also disable hash index
|
|
|
|
if (prefix_extractor == nullptr || table_properties == nullptr ||
|
|
|
|
table_properties->prefix_extractor_name.empty()) {
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
// prefix_extractor and prefix_extractor_block are both non-empty
|
|
|
|
if (table_properties->prefix_extractor_name.compare(
|
|
|
|
prefix_extractor->Name()) != 0) {
|
|
|
|
return true;
|
|
|
|
} else {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
CacheAllocationPtr CopyBufferToHeap(MemoryAllocator* allocator, Slice& buf) {
|
|
|
|
CacheAllocationPtr heap_buf;
|
|
|
|
heap_buf = AllocateBlock(buf.size(), allocator);
|
|
|
|
memcpy(heap_buf.get(), buf.data(), buf.size());
|
|
|
|
return heap_buf;
|
|
|
|
}
|
|
|
|
} // namespace
|
|
|
|
|
|
|
|
void BlockBasedTable::UpdateCacheHitMetrics(BlockType block_type,
|
|
|
|
GetContext* get_context,
|
|
|
|
size_t usage) const {
|
|
|
|
Statistics* const statistics = rep_->ioptions.statistics;
|
|
|
|
|
|
|
|
PERF_COUNTER_ADD(block_cache_hit_count, 1);
|
|
|
|
PERF_COUNTER_BY_LEVEL_ADD(block_cache_hit_count, 1,
|
|
|
|
static_cast<uint32_t>(rep_->level));
|
|
|
|
|
|
|
|
if (get_context) {
|
|
|
|
++get_context->get_context_stats_.num_cache_hit;
|
|
|
|
get_context->get_context_stats_.num_cache_bytes_read += usage;
|
|
|
|
} else {
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_HIT);
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_BYTES_READ, usage);
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (block_type) {
|
|
|
|
case BlockType::kFilter:
|
|
|
|
PERF_COUNTER_ADD(block_cache_filter_hit_count, 1);
|
|
|
|
|
|
|
|
if (get_context) {
|
|
|
|
++get_context->get_context_stats_.num_cache_filter_hit;
|
|
|
|
} else {
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_FILTER_HIT);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
case BlockType::kCompressionDictionary:
|
|
|
|
// TODO: introduce perf counter for compression dictionary hit count
|
|
|
|
if (get_context) {
|
|
|
|
++get_context->get_context_stats_.num_cache_compression_dict_hit;
|
|
|
|
} else {
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_COMPRESSION_DICT_HIT);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
case BlockType::kIndex:
|
|
|
|
PERF_COUNTER_ADD(block_cache_index_hit_count, 1);
|
|
|
|
|
|
|
|
if (get_context) {
|
|
|
|
++get_context->get_context_stats_.num_cache_index_hit;
|
|
|
|
} else {
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_INDEX_HIT);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
// TODO: introduce dedicated tickers/statistics/counters
|
|
|
|
// for range tombstones
|
|
|
|
if (get_context) {
|
|
|
|
++get_context->get_context_stats_.num_cache_data_hit;
|
|
|
|
} else {
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_DATA_HIT);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void BlockBasedTable::UpdateCacheMissMetrics(BlockType block_type,
|
|
|
|
GetContext* get_context) const {
|
|
|
|
Statistics* const statistics = rep_->ioptions.statistics;
|
|
|
|
|
|
|
|
// TODO: introduce aggregate (not per-level) block cache miss count
|
|
|
|
PERF_COUNTER_BY_LEVEL_ADD(block_cache_miss_count, 1,
|
|
|
|
static_cast<uint32_t>(rep_->level));
|
|
|
|
|
|
|
|
if (get_context) {
|
|
|
|
++get_context->get_context_stats_.num_cache_miss;
|
|
|
|
} else {
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_MISS);
|
|
|
|
}
|
|
|
|
|
|
|
|
// TODO: introduce perf counters for misses per block type
|
|
|
|
switch (block_type) {
|
|
|
|
case BlockType::kFilter:
|
|
|
|
if (get_context) {
|
|
|
|
++get_context->get_context_stats_.num_cache_filter_miss;
|
|
|
|
} else {
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_FILTER_MISS);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
case BlockType::kCompressionDictionary:
|
|
|
|
if (get_context) {
|
|
|
|
++get_context->get_context_stats_.num_cache_compression_dict_miss;
|
|
|
|
} else {
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_COMPRESSION_DICT_MISS);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
case BlockType::kIndex:
|
|
|
|
if (get_context) {
|
|
|
|
++get_context->get_context_stats_.num_cache_index_miss;
|
|
|
|
} else {
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_INDEX_MISS);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
// TODO: introduce dedicated tickers/statistics/counters
|
|
|
|
// for range tombstones
|
|
|
|
if (get_context) {
|
|
|
|
++get_context->get_context_stats_.num_cache_data_miss;
|
|
|
|
} else {
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_DATA_MISS);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void BlockBasedTable::UpdateCacheInsertionMetrics(BlockType block_type,
|
|
|
|
GetContext* get_context,
|
|
|
|
size_t usage,
|
|
|
|
bool redundant) const {
|
|
|
|
Statistics* const statistics = rep_->ioptions.statistics;
|
|
|
|
|
|
|
|
// TODO: introduce perf counters for block cache insertions
|
|
|
|
if (get_context) {
|
|
|
|
++get_context->get_context_stats_.num_cache_add;
|
|
|
|
if (redundant) {
|
|
|
|
++get_context->get_context_stats_.num_cache_add_redundant;
|
|
|
|
}
|
|
|
|
get_context->get_context_stats_.num_cache_bytes_write += usage;
|
|
|
|
} else {
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_ADD);
|
|
|
|
if (redundant) {
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_ADD_REDUNDANT);
|
|
|
|
}
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_BYTES_WRITE, usage);
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (block_type) {
|
|
|
|
case BlockType::kFilter:
|
|
|
|
if (get_context) {
|
|
|
|
++get_context->get_context_stats_.num_cache_filter_add;
|
|
|
|
if (redundant) {
|
|
|
|
++get_context->get_context_stats_.num_cache_filter_add_redundant;
|
|
|
|
}
|
|
|
|
get_context->get_context_stats_.num_cache_filter_bytes_insert += usage;
|
|
|
|
} else {
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_FILTER_ADD);
|
|
|
|
if (redundant) {
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_FILTER_ADD_REDUNDANT);
|
|
|
|
}
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_FILTER_BYTES_INSERT, usage);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
case BlockType::kCompressionDictionary:
|
|
|
|
if (get_context) {
|
|
|
|
++get_context->get_context_stats_.num_cache_compression_dict_add;
|
|
|
|
if (redundant) {
|
|
|
|
++get_context->get_context_stats_
|
|
|
|
.num_cache_compression_dict_add_redundant;
|
|
|
|
}
|
|
|
|
get_context->get_context_stats_
|
|
|
|
.num_cache_compression_dict_bytes_insert += usage;
|
|
|
|
} else {
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_COMPRESSION_DICT_ADD);
|
|
|
|
if (redundant) {
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_COMPRESSION_DICT_ADD_REDUNDANT);
|
|
|
|
}
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_COMPRESSION_DICT_BYTES_INSERT,
|
|
|
|
usage);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
case BlockType::kIndex:
|
|
|
|
if (get_context) {
|
|
|
|
++get_context->get_context_stats_.num_cache_index_add;
|
|
|
|
if (redundant) {
|
|
|
|
++get_context->get_context_stats_.num_cache_index_add_redundant;
|
|
|
|
}
|
|
|
|
get_context->get_context_stats_.num_cache_index_bytes_insert += usage;
|
|
|
|
} else {
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_INDEX_ADD);
|
|
|
|
if (redundant) {
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_INDEX_ADD_REDUNDANT);
|
|
|
|
}
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_INDEX_BYTES_INSERT, usage);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
// TODO: introduce dedicated tickers/statistics/counters
|
|
|
|
// for range tombstones
|
|
|
|
if (get_context) {
|
|
|
|
++get_context->get_context_stats_.num_cache_data_add;
|
|
|
|
if (redundant) {
|
|
|
|
++get_context->get_context_stats_.num_cache_data_add_redundant;
|
|
|
|
}
|
|
|
|
get_context->get_context_stats_.num_cache_data_bytes_insert += usage;
|
|
|
|
} else {
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_DATA_ADD);
|
|
|
|
if (redundant) {
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_DATA_ADD_REDUNDANT);
|
|
|
|
}
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_DATA_BYTES_INSERT, usage);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
Cache::Handle* BlockBasedTable::GetEntryFromCache(
|
|
|
|
Cache* block_cache, const Slice& key, BlockType block_type,
|
|
|
|
GetContext* get_context) const {
|
|
|
|
auto cache_handle = block_cache->Lookup(key, rep_->ioptions.statistics);
|
|
|
|
|
|
|
|
if (cache_handle != nullptr) {
|
|
|
|
UpdateCacheHitMetrics(block_type, get_context,
|
|
|
|
block_cache->GetUsage(cache_handle));
|
|
|
|
} else {
|
|
|
|
UpdateCacheMissMetrics(block_type, get_context);
|
|
|
|
}
|
|
|
|
|
|
|
|
return cache_handle;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Helper function to setup the cache key's prefix for the Table.
|
Move the index readers out of the block cache (#5298)
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
6 years ago
|
|
|
void BlockBasedTable::SetupCacheKeyPrefix(Rep* rep) {
|
|
|
|
assert(kMaxCacheKeyPrefixSize >= 10);
|
|
|
|
rep->cache_key_prefix_size = 0;
|
|
|
|
rep->compressed_cache_key_prefix_size = 0;
|
|
|
|
if (rep->table_options.block_cache != nullptr) {
|
|
|
|
GenerateCachePrefix<Cache, FSRandomAccessFile>(
|
|
|
|
rep->table_options.block_cache.get(), rep->file->file(),
|
|
|
|
&rep->cache_key_prefix[0], &rep->cache_key_prefix_size);
|
|
|
|
}
|
|
|
|
if (rep->table_options.persistent_cache != nullptr) {
|
|
|
|
GenerateCachePrefix<PersistentCache, FSRandomAccessFile>(
|
|
|
|
rep->table_options.persistent_cache.get(), rep->file->file(),
|
|
|
|
&rep->persistent_cache_key_prefix[0],
|
|
|
|
&rep->persistent_cache_key_prefix_size);
|
|
|
|
}
|
|
|
|
if (rep->table_options.block_cache_compressed != nullptr) {
|
|
|
|
GenerateCachePrefix<Cache, FSRandomAccessFile>(
|
|
|
|
rep->table_options.block_cache_compressed.get(), rep->file->file(),
|
|
|
|
&rep->compressed_cache_key_prefix[0],
|
|
|
|
&rep->compressed_cache_key_prefix_size);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
namespace {
|
|
|
|
// Return True if table_properties has `user_prop_name` has a `true` value
|
|
|
|
// or it doesn't contain this property (for backward compatible).
|
|
|
|
bool IsFeatureSupported(const TableProperties& table_properties,
|
|
|
|
const std::string& user_prop_name, Logger* info_log) {
|
|
|
|
auto& props = table_properties.user_collected_properties;
|
|
|
|
auto pos = props.find(user_prop_name);
|
|
|
|
// Older version doesn't have this value set. Skip this check.
|
|
|
|
if (pos != props.end()) {
|
|
|
|
if (pos->second == kPropFalse) {
|
|
|
|
return false;
|
|
|
|
} else if (pos->second != kPropTrue) {
|
|
|
|
ROCKS_LOG_WARN(info_log, "Property %s has invalidate value %s",
|
|
|
|
user_prop_name.c_str(), pos->second.c_str());
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Caller has to ensure seqno is not nullptr.
|
|
|
|
Status GetGlobalSequenceNumber(const TableProperties& table_properties,
|
|
|
|
SequenceNumber largest_seqno,
|
|
|
|
SequenceNumber* seqno) {
|
|
|
|
const auto& props = table_properties.user_collected_properties;
|
|
|
|
const auto version_pos = props.find(ExternalSstFilePropertyNames::kVersion);
|
|
|
|
const auto seqno_pos = props.find(ExternalSstFilePropertyNames::kGlobalSeqno);
|
|
|
|
|
|
|
|
*seqno = kDisableGlobalSequenceNumber;
|
|
|
|
if (version_pos == props.end()) {
|
|
|
|
if (seqno_pos != props.end()) {
|
|
|
|
std::array<char, 200> msg_buf;
|
|
|
|
// This is not an external sst file, global_seqno is not supported.
|
|
|
|
snprintf(
|
|
|
|
msg_buf.data(), msg_buf.max_size(),
|
|
|
|
"A non-external sst file have global seqno property with value %s",
|
|
|
|
seqno_pos->second.c_str());
|
|
|
|
return Status::Corruption(msg_buf.data());
|
|
|
|
}
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
|
|
|
uint32_t version = DecodeFixed32(version_pos->second.c_str());
|
|
|
|
if (version < 2) {
|
|
|
|
if (seqno_pos != props.end() || version != 1) {
|
|
|
|
std::array<char, 200> msg_buf;
|
|
|
|
// This is a v1 external sst file, global_seqno is not supported.
|
|
|
|
snprintf(msg_buf.data(), msg_buf.max_size(),
|
|
|
|
"An external sst file with version %u have global seqno "
|
|
|
|
"property with value %s",
|
|
|
|
version, seqno_pos->second.c_str());
|
|
|
|
return Status::Corruption(msg_buf.data());
|
|
|
|
}
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
|
|
|
// Since we have a plan to deprecate global_seqno, we do not return failure
|
|
|
|
// if seqno_pos == props.end(). We rely on version_pos to detect whether the
|
|
|
|
// SST is external.
|
|
|
|
SequenceNumber global_seqno(0);
|
|
|
|
if (seqno_pos != props.end()) {
|
|
|
|
global_seqno = DecodeFixed64(seqno_pos->second.c_str());
|
|
|
|
}
|
|
|
|
// SstTableReader open table reader with kMaxSequenceNumber as largest_seqno
|
|
|
|
// to denote it is unknown.
|
|
|
|
if (largest_seqno < kMaxSequenceNumber) {
|
|
|
|
if (global_seqno == 0) {
|
|
|
|
global_seqno = largest_seqno;
|
|
|
|
}
|
|
|
|
if (global_seqno != largest_seqno) {
|
|
|
|
std::array<char, 200> msg_buf;
|
|
|
|
snprintf(
|
|
|
|
msg_buf.data(), msg_buf.max_size(),
|
|
|
|
"An external sst file with version %u have global seqno property "
|
|
|
|
"with value %s, while largest seqno in the file is %llu",
|
|
|
|
version, seqno_pos->second.c_str(),
|
|
|
|
static_cast<unsigned long long>(largest_seqno));
|
|
|
|
return Status::Corruption(msg_buf.data());
|
|
|
|
}
|
|
|
|
}
|
|
|
|
*seqno = global_seqno;
|
|
|
|
|
|
|
|
if (global_seqno > kMaxSequenceNumber) {
|
|
|
|
std::array<char, 200> msg_buf;
|
|
|
|
snprintf(msg_buf.data(), msg_buf.max_size(),
|
|
|
|
"An external sst file with version %u have global seqno property "
|
|
|
|
"with value %llu, which is greater than kMaxSequenceNumber",
|
|
|
|
version, static_cast<unsigned long long>(global_seqno));
|
|
|
|
return Status::Corruption(msg_buf.data());
|
|
|
|
}
|
|
|
|
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
} // namespace
|
|
|
|
|
|
|
|
Slice BlockBasedTable::GetCacheKey(const char* cache_key_prefix,
|
|
|
|
size_t cache_key_prefix_size,
|
|
|
|
const BlockHandle& handle, char* cache_key) {
|
|
|
|
assert(cache_key != nullptr);
|
|
|
|
assert(cache_key_prefix_size != 0);
|
|
|
|
assert(cache_key_prefix_size <= kMaxCacheKeyPrefixSize);
|
|
|
|
memcpy(cache_key, cache_key_prefix, cache_key_prefix_size);
|
|
|
|
char* end =
|
|
|
|
EncodeVarint64(cache_key + cache_key_prefix_size, handle.offset());
|
|
|
|
return Slice(cache_key, static_cast<size_t>(end - cache_key));
|
|
|
|
}
|
|
|
|
|
|
|
|
Status BlockBasedTable::Open(
|
|
|
|
const ReadOptions& read_options, const ImmutableCFOptions& ioptions,
|
|
|
|
const EnvOptions& env_options, const BlockBasedTableOptions& table_options,
|
|
|
|
const InternalKeyComparator& internal_comparator,
|
|
|
|
std::unique_ptr<RandomAccessFileReader>&& file, uint64_t file_size,
|
|
|
|
std::unique_ptr<TableReader>* table_reader,
|
|
|
|
const SliceTransform* prefix_extractor,
|
|
|
|
const bool prefetch_index_and_filter_in_cache, const bool skip_filters,
|
|
|
|
const int level, const bool immortal_table,
|
|
|
|
const SequenceNumber largest_seqno, const bool force_direct_prefetch,
|
|
|
|
TailPrefetchStats* tail_prefetch_stats,
|
|
|
|
BlockCacheTracer* const block_cache_tracer,
|
|
|
|
size_t max_file_size_for_l0_meta_pin) {
|
|
|
|
table_reader->reset();
|
|
|
|
|
|
|
|
Status s;
|
|
|
|
Footer footer;
|
|
|
|
std::unique_ptr<FilePrefetchBuffer> prefetch_buffer;
|
|
|
|
|
|
|
|
// Only retain read_options.deadline and read_options.io_timeout.
|
|
|
|
// In future, we may retain more
|
|
|
|
// options. Specifically, w ignore verify_checksums and default to
|
|
|
|
// checksum verification anyway when creating the index and filter
|
|
|
|
// readers.
|
|
|
|
ReadOptions ro;
|
|
|
|
ro.deadline = read_options.deadline;
|
|
|
|
ro.io_timeout = read_options.io_timeout;
|
|
|
|
|
|
|
|
// prefetch both index and filters, down to all partitions
|
|
|
|
const bool prefetch_all = prefetch_index_and_filter_in_cache || level == 0;
|
|
|
|
const bool preload_all = !table_options.cache_index_and_filter_blocks;
|
|
|
|
|
|
|
|
if (!ioptions.allow_mmap_reads) {
|
|
|
|
s = PrefetchTail(ro, file.get(), file_size, force_direct_prefetch,
|
|
|
|
tail_prefetch_stats, prefetch_all, preload_all,
|
|
|
|
&prefetch_buffer);
|
|
|
|
// Return error in prefetch path to users.
|
|
|
|
if (!s.ok()) {
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
// Should not prefetch for mmap mode.
|
|
|
|
prefetch_buffer.reset(new FilePrefetchBuffer(
|
|
|
|
nullptr, 0, 0, false /* enable */, true /* track_min_offset */));
|
|
|
|
}
|
|
|
|
|
|
|
|
// Read in the following order:
|
|
|
|
// 1. Footer
|
|
|
|
// 2. [metaindex block]
|
|
|
|
// 3. [meta block: properties]
|
|
|
|
// 4. [meta block: range deletion tombstone]
|
|
|
|
// 5. [meta block: compression dictionary]
|
|
|
|
// 6. [meta block: index]
|
|
|
|
// 7. [meta block: filter]
|
|
|
|
IOOptions opts;
|
|
|
|
s = PrepareIOFromReadOptions(ro, file->env(), opts);
|
|
|
|
if (s.ok()) {
|
|
|
|
s = ReadFooterFromFile(opts, file.get(), prefetch_buffer.get(), file_size,
|
|
|
|
&footer, kBlockBasedTableMagicNumber);
|
|
|
|
}
|
|
|
|
if (!s.ok()) {
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
if (!BlockBasedTableSupportedVersion(footer.version())) {
|
|
|
|
return Status::Corruption(
|
|
|
|
"Unknown Footer version. Maybe this file was created with newer "
|
|
|
|
"version of RocksDB?");
|
|
|
|
}
|
|
|
|
|
|
|
|
// We've successfully read the footer. We are ready to serve requests.
|
|
|
|
// Better not mutate rep_ after the creation. eg. internal_prefix_transform
|
|
|
|
// raw pointer will be used to create HashIndexReader, whose reset may
|
|
|
|
// access a dangling pointer.
|
|
|
|
BlockCacheLookupContext lookup_context{TableReaderCaller::kPrefetch};
|
Skip bottom-level filter block caching when hit-optimized
Summary:
When Get() or NewIterator() trigger file loads, skip caching the filter block if
(1) optimize_filters_for_hits is set and (2) the file is on the bottommost
level. Also skip checking filters under the same conditions, which means that
for a preloaded file or a file that was trivially-moved to the bottom level, its
filter block will eventually expire from the cache.
- added parameters/instance variables in various places in order to propagate the config ("skip_filters") from version_set to block_based_table_reader
- in BlockBasedTable::Rep, this optimization prevents filter from being loaded when the file is opened simply by setting filter_policy = nullptr
- in BlockBasedTable::Get/BlockBasedTable::NewIterator, this optimization prevents filter from being used (even if it was loaded already) by setting filter = nullptr
Test Plan:
updated unit test:
$ ./db_test --gtest_filter=DBTest.OptimizeFiltersForHits
will also run 'make check'
Reviewers: sdong, igor, paultuckfield, anthony, rven, kradhakrishnan, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D51633
9 years ago
|
|
|
Rep* rep = new BlockBasedTable::Rep(ioptions, env_options, table_options,
|
For ApproximateSizes, pro-rate table metadata size over data blocks (#6784)
Summary:
The implementation of GetApproximateSizes was inconsistent in
its treatment of the size of non-data blocks of SST files, sometimes
including and sometimes now. This was at its worst with large portion
of table file used by filters and querying a small range that crossed
a table boundary: the size estimate would include large filter size.
It's conceivable that someone might want only to know the size in terms
of data blocks, but I believe that's unlikely enough to ignore for now.
Similarly, there's no evidence the internal function AppoximateOffsetOf
is used for anything other than a one-sided ApproximateSize, so I intend
to refactor to remove redundancy in a follow-up commit.
So to fix this, GetApproximateSizes (and implementation details
ApproximateSize and ApproximateOffsetOf) now consistently include in
their returned sizes a portion of table file metadata (incl filters
and indexes) based on the size portion of the data blocks in range. In
other words, if a key range covers data blocks that are X% by size of all
the table's data blocks, returned approximate size is X% of the total
file size. It would technically be more accurate to attribute metadata
based on number of keys, but that's not computationally efficient with
data available and rarely a meaningful difference.
Also includes miscellaneous comment improvements / clarifications.
Also included is a new approximatesizerandom benchmark for db_bench.
No significant performance difference seen with this change, whether ~700 ops/sec with cache_index_and_filter_blocks and small cache or ~150k ops/sec without cache_index_and_filter_blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6784
Test Plan:
Test added to DBTest.ApproximateSizesFilesWithErrorMargin.
Old code running new test...
[ RUN ] DBTest.ApproximateSizesFilesWithErrorMargin
db/db_test.cc:1562: Failure
Expected: (size) <= (11 * 100), actual: 9478 vs 1100
Other tests updated to reflect consistent accounting of metadata.
Reviewed By: siying
Differential Revision: D21334706
Pulled By: pdillinger
fbshipit-source-id: 6f86870e45213334fedbe9c73b4ebb1d8d611185
5 years ago
|
|
|
internal_comparator, skip_filters,
|
|
|
|
file_size, level, immortal_table);
|
|
|
|
rep->file = std::move(file);
|
|
|
|
rep->footer = footer;
|
|
|
|
rep->hash_index_allow_collision = table_options.hash_index_allow_collision;
|
|
|
|
// We need to wrap data with internal_prefix_transform to make sure it can
|
|
|
|
// handle prefix correctly.
|
|
|
|
if (prefix_extractor != nullptr) {
|
|
|
|
rep->internal_prefix_transform.reset(
|
|
|
|
new InternalKeySliceTransform(prefix_extractor));
|
|
|
|
}
|
Move the index readers out of the block cache (#5298)
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
6 years ago
|
|
|
SetupCacheKeyPrefix(rep);
|
|
|
|
std::unique_ptr<BlockBasedTable> new_table(
|
|
|
|
new BlockBasedTable(rep, block_cache_tracer));
|
|
|
|
|
|
|
|
// page cache options
|
|
|
|
rep->persistent_cache_options =
|
|
|
|
PersistentCacheOptions(rep->table_options.persistent_cache,
|
|
|
|
std::string(rep->persistent_cache_key_prefix,
|
|
|
|
rep->persistent_cache_key_prefix_size),
|
|
|
|
rep->ioptions.statistics);
|
|
|
|
|
|
|
|
// Meta-blocks are not dictionary compressed. Explicitly set the dictionary
|
|
|
|
// handle to null, otherwise it may be seen as uninitialized during the below
|
|
|
|
// meta-block reads.
|
|
|
|
rep->compression_dict_handle = BlockHandle::NullBlockHandle();
|
|
|
|
|
|
|
|
// Read metaindex
|
|
|
|
std::unique_ptr<Block> metaindex;
|
|
|
|
std::unique_ptr<InternalIterator> metaindex_iter;
|
|
|
|
s = new_table->ReadMetaIndexBlock(ro, prefetch_buffer.get(), &metaindex,
|
|
|
|
&metaindex_iter);
|
|
|
|
if (!s.ok()) {
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
// Populates table_properties and some fields that depend on it,
|
|
|
|
// such as index_type.
|
|
|
|
s = new_table->ReadPropertiesBlock(ro, prefetch_buffer.get(),
|
|
|
|
metaindex_iter.get(), largest_seqno);
|
|
|
|
if (!s.ok()) {
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
s = new_table->ReadRangeDelBlock(ro, prefetch_buffer.get(),
|
|
|
|
metaindex_iter.get(), internal_comparator,
|
|
|
|
&lookup_context);
|
|
|
|
if (!s.ok()) {
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
s = new_table->PrefetchIndexAndFilterBlocks(
|
|
|
|
ro, prefetch_buffer.get(), metaindex_iter.get(), new_table.get(),
|
|
|
|
prefetch_all, table_options, level, file_size,
|
|
|
|
max_file_size_for_l0_meta_pin, &lookup_context);
|
|
|
|
|
|
|
|
if (s.ok()) {
|
|
|
|
// Update tail prefetch stats
|
|
|
|
assert(prefetch_buffer.get() != nullptr);
|
|
|
|
if (tail_prefetch_stats != nullptr) {
|
|
|
|
assert(prefetch_buffer->min_offset_read() < file_size);
|
|
|
|
tail_prefetch_stats->RecordEffectiveSize(
|
|
|
|
static_cast<size_t>(file_size) - prefetch_buffer->min_offset_read());
|
|
|
|
}
|
|
|
|
|
|
|
|
*table_reader = std::move(new_table);
|
|
|
|
}
|
|
|
|
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
Status BlockBasedTable::PrefetchTail(
|
|
|
|
const ReadOptions& ro, RandomAccessFileReader* file, uint64_t file_size,
|
|
|
|
bool force_direct_prefetch, TailPrefetchStats* tail_prefetch_stats,
|
|
|
|
const bool prefetch_all, const bool preload_all,
|
|
|
|
std::unique_ptr<FilePrefetchBuffer>* prefetch_buffer) {
|
|
|
|
size_t tail_prefetch_size = 0;
|
|
|
|
if (tail_prefetch_stats != nullptr) {
|
|
|
|
// Multiple threads may get a 0 (no history) when running in parallel,
|
|
|
|
// but it will get cleared after the first of them finishes.
|
|
|
|
tail_prefetch_size = tail_prefetch_stats->GetSuggestedPrefetchSize();
|
|
|
|
}
|
|
|
|
if (tail_prefetch_size == 0) {
|
|
|
|
// Before read footer, readahead backwards to prefetch data. Do more
|
|
|
|
// readahead if we're going to read index/filter.
|
|
|
|
// TODO: This may incorrectly select small readahead in case partitioned
|
|
|
|
// index/filter is enabled and top-level partition pinning is enabled.
|
|
|
|
// That's because we need to issue readahead before we read the properties,
|
|
|
|
// at which point we don't yet know the index type.
|
|
|
|
tail_prefetch_size = prefetch_all || preload_all ? 512 * 1024 : 4 * 1024;
|
|
|
|
}
|
|
|
|
size_t prefetch_off;
|
|
|
|
size_t prefetch_len;
|
|
|
|
if (file_size < tail_prefetch_size) {
|
|
|
|
prefetch_off = 0;
|
|
|
|
prefetch_len = static_cast<size_t>(file_size);
|
|
|
|
} else {
|
|
|
|
prefetch_off = static_cast<size_t>(file_size - tail_prefetch_size);
|
|
|
|
prefetch_len = tail_prefetch_size;
|
|
|
|
}
|
|
|
|
TEST_SYNC_POINT_CALLBACK("BlockBasedTable::Open::TailPrefetchLen",
|
|
|
|
&tail_prefetch_size);
|
|
|
|
|
|
|
|
// Try file system prefetch
|
|
|
|
if (!file->use_direct_io() && !force_direct_prefetch) {
|
|
|
|
if (!file->Prefetch(prefetch_off, prefetch_len).IsNotSupported()) {
|
|
|
|
prefetch_buffer->reset(
|
|
|
|
new FilePrefetchBuffer(nullptr, 0, 0, false, true));
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// Use `FilePrefetchBuffer`
|
|
|
|
prefetch_buffer->reset(new FilePrefetchBuffer(nullptr, 0, 0, true, true));
|
|
|
|
IOOptions opts;
|
|
|
|
Status s = PrepareIOFromReadOptions(ro, file->env(), opts);
|
|
|
|
if (s.ok()) {
|
|
|
|
s = (*prefetch_buffer)->Prefetch(opts, file, prefetch_off, prefetch_len);
|
|
|
|
}
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
Status BlockBasedTable::TryReadPropertiesWithGlobalSeqno(
|
|
|
|
const ReadOptions& ro, FilePrefetchBuffer* prefetch_buffer,
|
|
|
|
const Slice& handle_value, TableProperties** table_properties) {
|
|
|
|
assert(table_properties != nullptr);
|
|
|
|
// If this is an external SST file ingested with write_global_seqno set to
|
|
|
|
// true, then we expect the checksum mismatch because checksum was written
|
|
|
|
// by SstFileWriter, but its global seqno in the properties block may have
|
|
|
|
// been changed during ingestion. In this case, we read the properties
|
|
|
|
// block, copy it to a memory buffer, change the global seqno to its
|
|
|
|
// original value, i.e. 0, and verify the checksum again.
|
|
|
|
BlockHandle props_block_handle;
|
|
|
|
CacheAllocationPtr tmp_buf;
|
|
|
|
Status s = ReadProperties(ro, handle_value, rep_->file.get(), prefetch_buffer,
|
|
|
|
rep_->footer, rep_->ioptions, table_properties,
|
|
|
|
false /* verify_checksum */, &props_block_handle,
|
|
|
|
&tmp_buf, false /* compression_type_missing */,
|
|
|
|
nullptr /* memory_allocator */);
|
|
|
|
if (s.ok() && tmp_buf) {
|
|
|
|
const auto seqno_pos_iter =
|
|
|
|
(*table_properties)
|
|
|
|
->properties_offsets.find(
|
|
|
|
ExternalSstFilePropertyNames::kGlobalSeqno);
|
|
|
|
size_t block_size = static_cast<size_t>(props_block_handle.size());
|
|
|
|
if (seqno_pos_iter != (*table_properties)->properties_offsets.end()) {
|
|
|
|
uint64_t global_seqno_offset = seqno_pos_iter->second;
|
|
|
|
EncodeFixed64(
|
|
|
|
tmp_buf.get() + global_seqno_offset - props_block_handle.offset(), 0);
|
|
|
|
}
|
|
|
|
s = ROCKSDB_NAMESPACE::VerifyBlockChecksum(
|
|
|
|
rep_->footer.checksum(), tmp_buf.get(), block_size,
|
|
|
|
rep_->file->file_name(), props_block_handle.offset());
|
|
|
|
}
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
Status BlockBasedTable::ReadPropertiesBlock(
|
|
|
|
const ReadOptions& ro, FilePrefetchBuffer* prefetch_buffer,
|
|
|
|
InternalIterator* meta_iter, const SequenceNumber largest_seqno) {
|
RocksDB 2.8 to be able to read files generated by 2.6
Summary:
From 2.6 to 2.7, property block name is renamed from rocksdb.stats to rocksdb.properties. Older properties were not able to be loaded. In 2.8, we seem to have added some logic that uses property block without checking null pointers, which create segment faults.
In this patch, we fix it by:
(1) try rocksdb.stats if rocksdb.properties is not found
(2) add some null checking before consuming rep->table_properties
Test Plan: make sure a file generated in 2.7 couldn't be opened now can be opened.
Reviewers: haobo, igor, yhchiang
Reviewed By: igor
CC: ljin, xjin, dhruba, kailiu, leveldb
Differential Revision: https://reviews.facebook.net/D17961
11 years ago
|
|
|
bool found_properties_block = true;
|
|
|
|
Status s;
|
|
|
|
s = SeekToPropertiesBlock(meta_iter, &found_properties_block);
|
RocksDB 2.8 to be able to read files generated by 2.6
Summary:
From 2.6 to 2.7, property block name is renamed from rocksdb.stats to rocksdb.properties. Older properties were not able to be loaded. In 2.8, we seem to have added some logic that uses property block without checking null pointers, which create segment faults.
In this patch, we fix it by:
(1) try rocksdb.stats if rocksdb.properties is not found
(2) add some null checking before consuming rep->table_properties
Test Plan: make sure a file generated in 2.7 couldn't be opened now can be opened.
Reviewers: haobo, igor, yhchiang
Reviewed By: igor
CC: ljin, xjin, dhruba, kailiu, leveldb
Differential Revision: https://reviews.facebook.net/D17961
11 years ago
|
|
|
|
|
|
|
if (!s.ok()) {
|
|
|
|
ROCKS_LOG_WARN(rep_->ioptions.info_log,
|
|
|
|
"Error when seeking to properties block from file: %s",
|
|
|
|
s.ToString().c_str());
|
|
|
|
} else if (found_properties_block) {
|
|
|
|
s = meta_iter->status();
|
|
|
|
TableProperties* table_properties = nullptr;
|
|
|
|
if (s.ok()) {
|
|
|
|
s = ReadProperties(
|
|
|
|
ro, meta_iter->value(), rep_->file.get(), prefetch_buffer,
|
|
|
|
rep_->footer, rep_->ioptions, &table_properties,
|
|
|
|
true /* verify_checksum */, nullptr /* ret_block_handle */,
|
|
|
|
nullptr /* ret_block_contents */,
|
|
|
|
false /* compression_type_missing */, nullptr /* memory_allocator */);
|
|
|
|
}
|
|
|
|
IGNORE_STATUS_IF_ERROR(s);
|
|
|
|
|
|
|
|
if (s.IsCorruption()) {
|
|
|
|
s = TryReadPropertiesWithGlobalSeqno(
|
|
|
|
ro, prefetch_buffer, meta_iter->value(), &table_properties);
|
|
|
|
IGNORE_STATUS_IF_ERROR(s);
|
|
|
|
}
|
|
|
|
std::unique_ptr<TableProperties> props_guard;
|
|
|
|
if (table_properties != nullptr) {
|
|
|
|
props_guard.reset(table_properties);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!s.ok()) {
|
|
|
|
ROCKS_LOG_WARN(rep_->ioptions.info_log,
|
|
|
|
"Encountered error while reading data from properties "
|
|
|
|
"block %s",
|
|
|
|
s.ToString().c_str());
|
|
|
|
} else {
|
|
|
|
assert(table_properties != nullptr);
|
|
|
|
rep_->table_properties.reset(props_guard.release());
|
|
|
|
rep_->blocks_maybe_compressed =
|
|
|
|
rep_->table_properties->compression_name !=
|
|
|
|
CompressionTypeToString(kNoCompression);
|
|
|
|
rep_->blocks_definitely_zstd_compressed =
|
|
|
|
(rep_->table_properties->compression_name ==
|
|
|
|
CompressionTypeToString(kZSTD) ||
|
|
|
|
rep_->table_properties->compression_name ==
|
|
|
|
CompressionTypeToString(kZSTDNotFinalCompression));
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
ROCKS_LOG_ERROR(rep_->ioptions.info_log,
|
|
|
|
"Cannot find Properties block from file.");
|
|
|
|
}
|
|
|
|
#ifndef ROCKSDB_LITE
|
|
|
|
if (rep_->table_properties) {
|
|
|
|
ParseSliceTransform(rep_->table_properties->prefix_extractor_name,
|
|
|
|
&(rep_->table_prefix_extractor));
|
|
|
|
}
|
|
|
|
#endif // ROCKSDB_LITE
|
|
|
|
|
|
|
|
// Read the table properties, if provided.
|
|
|
|
if (rep_->table_properties) {
|
|
|
|
rep_->whole_key_filtering &=
|
|
|
|
IsFeatureSupported(*(rep_->table_properties),
|
|
|
|
BlockBasedTablePropertyNames::kWholeKeyFiltering,
|
|
|
|
rep_->ioptions.info_log);
|
|
|
|
rep_->prefix_filtering &=
|
|
|
|
IsFeatureSupported(*(rep_->table_properties),
|
|
|
|
BlockBasedTablePropertyNames::kPrefixFiltering,
|
|
|
|
rep_->ioptions.info_log);
|
|
|
|
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
rep_->index_key_includes_seq =
|
|
|
|
rep_->table_properties->index_key_is_user_key == 0;
|
|
|
|
rep_->index_value_is_full =
|
|
|
|
rep_->table_properties->index_value_is_delta_encoded == 0;
|
|
|
|
|
|
|
|
// Update index_type with the true type.
|
|
|
|
// If table properties don't contain index type, we assume that the table
|
|
|
|
// is in very old format and has kBinarySearch index type.
|
|
|
|
auto& props = rep_->table_properties->user_collected_properties;
|
|
|
|
auto pos = props.find(BlockBasedTablePropertyNames::kIndexType);
|
|
|
|
if (pos != props.end()) {
|
|
|
|
rep_->index_type = static_cast<BlockBasedTableOptions::IndexType>(
|
|
|
|
DecodeFixed32(pos->second.c_str()));
|
|
|
|
}
|
|
|
|
|
|
|
|
rep_->index_has_first_key =
|
|
|
|
rep_->index_type == BlockBasedTableOptions::kBinarySearchWithFirstKey;
|
|
|
|
|
|
|
|
s = GetGlobalSequenceNumber(*(rep_->table_properties), largest_seqno,
|
|
|
|
&(rep_->global_seqno));
|
|
|
|
if (!s.ok()) {
|
|
|
|
ROCKS_LOG_ERROR(rep_->ioptions.info_log, "%s", s.ToString().c_str());
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
Status BlockBasedTable::ReadRangeDelBlock(
|
|
|
|
const ReadOptions& read_options, FilePrefetchBuffer* prefetch_buffer,
|
|
|
|
InternalIterator* meta_iter,
|
|
|
|
const InternalKeyComparator& internal_comparator,
|
|
|
|
BlockCacheLookupContext* lookup_context) {
|
|
|
|
Status s;
|
|
|
|
bool found_range_del_block;
|
|
|
|
BlockHandle range_del_handle;
|
|
|
|
s = SeekToRangeDelBlock(meta_iter, &found_range_del_block, &range_del_handle);
|
|
|
|
if (!s.ok()) {
|
|
|
|
ROCKS_LOG_WARN(
|
|
|
|
rep_->ioptions.info_log,
|
|
|
|
"Error when seeking to range delete tombstones block from file: %s",
|
|
|
|
s.ToString().c_str());
|
|
|
|
} else if (found_range_del_block && !range_del_handle.IsNull()) {
|
|
|
|
std::unique_ptr<InternalIterator> iter(NewDataBlockIterator<DataBlockIter>(
|
|
|
|
read_options, range_del_handle,
|
|
|
|
/*input_iter=*/nullptr, BlockType::kRangeDeletion,
|
|
|
|
/*get_context=*/nullptr, lookup_context, Status(), prefetch_buffer));
|
|
|
|
assert(iter != nullptr);
|
|
|
|
s = iter->status();
|
Cache fragmented range tombstones in BlockBasedTableReader (#4493)
Summary:
This allows tombstone fragmenting to only be performed when the table is opened, and cached for subsequent accesses.
On the same DB used in #4449, running `readrandom` results in the following:
```
readrandom : 0.983 micros/op 1017076 ops/sec; 78.3 MB/s (63103 of 100000 found)
```
Now that Get performance in the presence of range tombstones is reasonable, I also compared the performance between a DB with range tombstones, "expanded" range tombstones (several point tombstones that cover the same keys the equivalent range tombstone would cover, a common workaround for DeleteRange), and no range tombstones. The created DBs had 5 million keys each, and DeleteRange was called at regular intervals (depending on the total number of range tombstones being written) after 4.5 million Puts. The table below summarizes the results of a `readwhilewriting` benchmark (in order to provide somewhat more realistic results):
```
Tombstones? | avg micros/op | stddev micros/op | avg ops/s | stddev ops/s
----------------- | ------------- | ---------------- | ------------ | ------------
None | 0.6186 | 0.04637 | 1,625,252.90 | 124,679.41
500 Expanded | 0.6019 | 0.03628 | 1,666,670.40 | 101,142.65
500 Unexpanded | 0.6435 | 0.03994 | 1,559,979.40 | 104,090.52
1k Expanded | 0.6034 | 0.04349 | 1,665,128.10 | 125,144.57
1k Unexpanded | 0.6261 | 0.03093 | 1,600,457.50 | 79,024.94
5k Expanded | 0.6163 | 0.05926 | 1,636,668.80 | 154,888.85
5k Unexpanded | 0.6402 | 0.04002 | 1,567,804.70 | 100,965.55
10k Expanded | 0.6036 | 0.05105 | 1,667,237.70 | 142,830.36
10k Unexpanded | 0.6128 | 0.02598 | 1,634,633.40 | 72,161.82
25k Expanded | 0.6198 | 0.04542 | 1,620,980.50 | 116,662.93
25k Unexpanded | 0.5478 | 0.0362 | 1,833,059.10 | 121,233.81
50k Expanded | 0.5104 | 0.04347 | 1,973,107.90 | 184,073.49
50k Unexpanded | 0.4528 | 0.03387 | 2,219,034.50 | 170,984.32
```
After a large enough quantity of range tombstones are written, range tombstone Gets can become faster than reading from an equivalent DB with several point tombstones.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4493
Differential Revision: D10842844
Pulled By: abhimadan
fbshipit-source-id: a7d44534f8120e6aabb65779d26c6b9df954c509
6 years ago
|
|
|
if (!s.ok()) {
|
|
|
|
ROCKS_LOG_WARN(
|
|
|
|
rep_->ioptions.info_log,
|
Cache fragmented range tombstones in BlockBasedTableReader (#4493)
Summary:
This allows tombstone fragmenting to only be performed when the table is opened, and cached for subsequent accesses.
On the same DB used in #4449, running `readrandom` results in the following:
```
readrandom : 0.983 micros/op 1017076 ops/sec; 78.3 MB/s (63103 of 100000 found)
```
Now that Get performance in the presence of range tombstones is reasonable, I also compared the performance between a DB with range tombstones, "expanded" range tombstones (several point tombstones that cover the same keys the equivalent range tombstone would cover, a common workaround for DeleteRange), and no range tombstones. The created DBs had 5 million keys each, and DeleteRange was called at regular intervals (depending on the total number of range tombstones being written) after 4.5 million Puts. The table below summarizes the results of a `readwhilewriting` benchmark (in order to provide somewhat more realistic results):
```
Tombstones? | avg micros/op | stddev micros/op | avg ops/s | stddev ops/s
----------------- | ------------- | ---------------- | ------------ | ------------
None | 0.6186 | 0.04637 | 1,625,252.90 | 124,679.41
500 Expanded | 0.6019 | 0.03628 | 1,666,670.40 | 101,142.65
500 Unexpanded | 0.6435 | 0.03994 | 1,559,979.40 | 104,090.52
1k Expanded | 0.6034 | 0.04349 | 1,665,128.10 | 125,144.57
1k Unexpanded | 0.6261 | 0.03093 | 1,600,457.50 | 79,024.94
5k Expanded | 0.6163 | 0.05926 | 1,636,668.80 | 154,888.85
5k Unexpanded | 0.6402 | 0.04002 | 1,567,804.70 | 100,965.55
10k Expanded | 0.6036 | 0.05105 | 1,667,237.70 | 142,830.36
10k Unexpanded | 0.6128 | 0.02598 | 1,634,633.40 | 72,161.82
25k Expanded | 0.6198 | 0.04542 | 1,620,980.50 | 116,662.93
25k Unexpanded | 0.5478 | 0.0362 | 1,833,059.10 | 121,233.81
50k Expanded | 0.5104 | 0.04347 | 1,973,107.90 | 184,073.49
50k Unexpanded | 0.4528 | 0.03387 | 2,219,034.50 | 170,984.32
```
After a large enough quantity of range tombstones are written, range tombstone Gets can become faster than reading from an equivalent DB with several point tombstones.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4493
Differential Revision: D10842844
Pulled By: abhimadan
fbshipit-source-id: a7d44534f8120e6aabb65779d26c6b9df954c509
6 years ago
|
|
|
"Encountered error while reading data from range del block %s",
|
|
|
|
s.ToString().c_str());
|
|
|
|
IGNORE_STATUS_IF_ERROR(s);
|
|
|
|
} else {
|
|
|
|
rep_->fragmented_range_dels =
|
|
|
|
std::make_shared<FragmentedRangeTombstoneList>(std::move(iter),
|
|
|
|
internal_comparator);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
Status BlockBasedTable::PrefetchIndexAndFilterBlocks(
|
|
|
|
const ReadOptions& ro, FilePrefetchBuffer* prefetch_buffer,
|
|
|
|
InternalIterator* meta_iter, BlockBasedTable* new_table, bool prefetch_all,
|
|
|
|
const BlockBasedTableOptions& table_options, const int level,
|
|
|
|
size_t file_size, size_t max_file_size_for_l0_meta_pin,
|
|
|
|
BlockCacheLookupContext* lookup_context) {
|
|
|
|
Status s;
|
|
|
|
|
|
|
|
// Find filter handle and filter type
|
|
|
|
if (rep_->filter_policy) {
|
|
|
|
for (auto filter_type :
|
|
|
|
{Rep::FilterType::kFullFilter, Rep::FilterType::kPartitionedFilter,
|
|
|
|
Rep::FilterType::kBlockFilter}) {
|
|
|
|
std::string prefix;
|
|
|
|
switch (filter_type) {
|
|
|
|
case Rep::FilterType::kFullFilter:
|
|
|
|
prefix = kFullFilterBlockPrefix;
|
|
|
|
break;
|
|
|
|
case Rep::FilterType::kPartitionedFilter:
|
|
|
|
prefix = kPartitionedFilterBlockPrefix;
|
|
|
|
break;
|
|
|
|
case Rep::FilterType::kBlockFilter:
|
|
|
|
prefix = kFilterBlockPrefix;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
assert(0);
|
|
|
|
}
|
|
|
|
std::string filter_block_key = prefix;
|
|
|
|
filter_block_key.append(rep_->filter_policy->Name());
|
|
|
|
if (FindMetaBlock(meta_iter, filter_block_key, &rep_->filter_handle)
|
|
|
|
.ok()) {
|
|
|
|
rep_->filter_type = filter_type;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
// Partition filters cannot be enabled without partition indexes
|
|
|
|
assert(rep_->filter_type != Rep::FilterType::kPartitionedFilter ||
|
|
|
|
rep_->index_type == BlockBasedTableOptions::kTwoLevelIndexSearch);
|
|
|
|
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
// Find compression dictionary handle
|
|
|
|
bool found_compression_dict = false;
|
|
|
|
s = SeekToCompressionDictBlock(meta_iter, &found_compression_dict,
|
|
|
|
&rep_->compression_dict_handle);
|
|
|
|
if (!s.ok()) {
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
BlockBasedTableOptions::IndexType index_type = rep_->index_type;
|
Move the index readers out of the block cache (#5298)
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
6 years ago
|
|
|
|
|
|
|
const bool use_cache = table_options.cache_index_and_filter_blocks;
|
|
|
|
|
|
|
|
const bool maybe_flushed =
|
|
|
|
level == 0 && file_size <= max_file_size_for_l0_meta_pin;
|
|
|
|
std::function<bool(PinningTier, PinningTier)> is_pinned =
|
|
|
|
[maybe_flushed, &is_pinned](PinningTier pinning_tier,
|
|
|
|
PinningTier fallback_pinning_tier) {
|
|
|
|
// Fallback to fallback would lead to infinite recursion. Disallow it.
|
|
|
|
assert(fallback_pinning_tier != PinningTier::kFallback);
|
|
|
|
|
|
|
|
switch (pinning_tier) {
|
|
|
|
case PinningTier::kFallback:
|
|
|
|
return is_pinned(fallback_pinning_tier,
|
|
|
|
PinningTier::kNone /* fallback_pinning_tier */);
|
|
|
|
case PinningTier::kNone:
|
|
|
|
return false;
|
|
|
|
case PinningTier::kFlushedAndSimilar:
|
|
|
|
return maybe_flushed;
|
|
|
|
case PinningTier::kAll:
|
|
|
|
return true;
|
|
|
|
};
|
|
|
|
|
|
|
|
// In GCC, this is needed to suppress `control reaches end of non-void
|
|
|
|
// function [-Werror=return-type]`.
|
|
|
|
assert(false);
|
|
|
|
return false;
|
|
|
|
};
|
|
|
|
const bool pin_top_level_index = is_pinned(
|
|
|
|
table_options.metadata_cache_options.top_level_index_pinning,
|
|
|
|
table_options.pin_top_level_index_and_filter ? PinningTier::kAll
|
|
|
|
: PinningTier::kNone);
|
|
|
|
const bool pin_partition =
|
|
|
|
is_pinned(table_options.metadata_cache_options.partition_pinning,
|
|
|
|
table_options.pin_l0_filter_and_index_blocks_in_cache
|
|
|
|
? PinningTier::kFlushedAndSimilar
|
|
|
|
: PinningTier::kNone);
|
|
|
|
const bool pin_unpartitioned =
|
|
|
|
is_pinned(table_options.metadata_cache_options.unpartitioned_pinning,
|
|
|
|
table_options.pin_l0_filter_and_index_blocks_in_cache
|
|
|
|
? PinningTier::kFlushedAndSimilar
|
|
|
|
: PinningTier::kNone);
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
|
|
|
|
// pin the first level of index
|
|
|
|
const bool pin_index =
|
|
|
|
index_type == BlockBasedTableOptions::kTwoLevelIndexSearch
|
|
|
|
? pin_top_level_index
|
|
|
|
: pin_unpartitioned;
|
|
|
|
// prefetch the first level of index
|
|
|
|
const bool prefetch_index = prefetch_all || pin_index;
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
|
|
|
|
std::unique_ptr<IndexReader> index_reader;
|
|
|
|
s = new_table->CreateIndexReader(ro, prefetch_buffer, meta_iter, use_cache,
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
prefetch_index, pin_index, lookup_context,
|
|
|
|
&index_reader);
|
|
|
|
if (!s.ok()) {
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
rep_->index_reader = std::move(index_reader);
|
|
|
|
|
|
|
|
// The partitions of partitioned index are always stored in cache. They
|
|
|
|
// are hence follow the configuration for pin and prefetch regardless of
|
|
|
|
// the value of cache_index_and_filter_blocks
|
|
|
|
if (prefetch_all || pin_partition) {
|
|
|
|
s = rep_->index_reader->CacheDependencies(ro, pin_partition);
|
|
|
|
}
|
|
|
|
if (!s.ok()) {
|
|
|
|
return s;
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
}
|
|
|
|
|
|
|
|
// pin the first level of filter
|
|
|
|
const bool pin_filter =
|
|
|
|
rep_->filter_type == Rep::FilterType::kPartitionedFilter
|
|
|
|
? pin_top_level_index
|
|
|
|
: pin_unpartitioned;
|
|
|
|
// prefetch the first level of filter
|
|
|
|
const bool prefetch_filter = prefetch_all || pin_filter;
|
Move the index readers out of the block cache (#5298)
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
6 years ago
|
|
|
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
if (rep_->filter_policy) {
|
|
|
|
auto filter = new_table->CreateFilterBlockReader(
|
|
|
|
ro, prefetch_buffer, use_cache, prefetch_filter, pin_filter,
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
lookup_context);
|
|
|
|
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
if (filter) {
|
|
|
|
// Refer to the comment above about paritioned indexes always being cached
|
|
|
|
if (prefetch_all || pin_partition) {
|
|
|
|
s = filter->CacheDependencies(ro, pin_partition);
|
|
|
|
if (!s.ok()) {
|
|
|
|
return s;
|
|
|
|
}
|
Move the index readers out of the block cache (#5298)
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
6 years ago
|
|
|
}
|
|
|
|
rep_->filter = std::move(filter);
|
Move the index readers out of the block cache (#5298)
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
6 years ago
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!rep_->compression_dict_handle.IsNull()) {
|
|
|
|
std::unique_ptr<UncompressionDictReader> uncompression_dict_reader;
|
|
|
|
s = UncompressionDictReader::Create(
|
|
|
|
this, ro, prefetch_buffer, use_cache, prefetch_all || pin_unpartitioned,
|
|
|
|
pin_unpartitioned, lookup_context, &uncompression_dict_reader);
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
if (!s.ok()) {
|
|
|
|
return s;
|
|
|
|
}
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
|
|
|
|
rep_->uncompression_dict_reader = std::move(uncompression_dict_reader);
|
|
|
|
}
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
|
|
|
|
assert(s.ok());
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
void BlockBasedTable::SetupForCompaction() {
|
|
|
|
switch (rep_->ioptions.access_hint_on_compaction_start) {
|
|
|
|
case Options::NONE:
|
|
|
|
break;
|
|
|
|
case Options::NORMAL:
|
Introduce a new storage specific Env API (#5761)
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
5 years ago
|
|
|
rep_->file->file()->Hint(FSRandomAccessFile::kNormal);
|
|
|
|
break;
|
|
|
|
case Options::SEQUENTIAL:
|
Introduce a new storage specific Env API (#5761)
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
5 years ago
|
|
|
rep_->file->file()->Hint(FSRandomAccessFile::kSequential);
|
|
|
|
break;
|
|
|
|
case Options::WILLNEED:
|
Introduce a new storage specific Env API (#5761)
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
5 years ago
|
|
|
rep_->file->file()->Hint(FSRandomAccessFile::kWillNeed);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
assert(false);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
std::shared_ptr<const TableProperties> BlockBasedTable::GetTableProperties()
|
|
|
|
const {
|
|
|
|
return rep_->table_properties;
|
|
|
|
}
|
|
|
|
|
|
|
|
size_t BlockBasedTable::ApproximateMemoryUsage() const {
|
|
|
|
size_t usage = 0;
|
|
|
|
if (rep_->filter) {
|
|
|
|
usage += rep_->filter->ApproximateMemoryUsage();
|
|
|
|
}
|
|
|
|
if (rep_->index_reader) {
|
|
|
|
usage += rep_->index_reader->ApproximateMemoryUsage();
|
|
|
|
}
|
|
|
|
if (rep_->uncompression_dict_reader) {
|
|
|
|
usage += rep_->uncompression_dict_reader->ApproximateMemoryUsage();
|
|
|
|
}
|
|
|
|
return usage;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Load the meta-index-block from the file. On success, return the loaded
|
|
|
|
// metaindex
|
|
|
|
// block and its iterator.
|
|
|
|
Status BlockBasedTable::ReadMetaIndexBlock(
|
|
|
|
const ReadOptions& ro, FilePrefetchBuffer* prefetch_buffer,
|
|
|
|
std::unique_ptr<Block>* metaindex_block,
|
|
|
|
std::unique_ptr<InternalIterator>* iter) {
|
|
|
|
// TODO(sanjay): Skip this if footer.metaindex_handle() size indicates
|
|
|
|
// it is an empty block.
|
|
|
|
std::unique_ptr<Block> metaindex;
|
|
|
|
Status s = ReadBlockFromFile(
|
|
|
|
rep_->file.get(), prefetch_buffer, rep_->footer, ro,
|
|
|
|
rep_->footer.metaindex_handle(), &metaindex, rep_->ioptions,
|
|
|
|
true /* decompress */, true /*maybe_compressed*/, BlockType::kMetaIndex,
|
|
|
|
UncompressionDict::GetEmptyDict(), rep_->persistent_cache_options,
|
|
|
|
0 /* read_amp_bytes_per_bit */, GetMemoryAllocator(rep_->table_options),
|
|
|
|
false /* for_compaction */, rep_->blocks_definitely_zstd_compressed,
|
|
|
|
nullptr /* filter_policy */);
|
|
|
|
|
|
|
|
if (!s.ok()) {
|
|
|
|
ROCKS_LOG_ERROR(rep_->ioptions.info_log,
|
|
|
|
"Encountered error while reading data from properties"
|
|
|
|
" block %s",
|
|
|
|
s.ToString().c_str());
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
*metaindex_block = std::move(metaindex);
|
|
|
|
// meta block uses bytewise comparator.
|
|
|
|
iter->reset(metaindex_block->get()->NewDataIterator(
|
|
|
|
BytewiseComparator(), kDisableGlobalSequenceNumber));
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
template <typename TBlocklike>
|
|
|
|
Status BlockBasedTable::GetDataBlockFromCache(
|
|
|
|
const Slice& block_cache_key, const Slice& compressed_block_cache_key,
|
|
|
|
Cache* block_cache, Cache* block_cache_compressed,
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
const ReadOptions& read_options, CachableEntry<TBlocklike>* block,
|
|
|
|
const UncompressionDict& uncompression_dict, BlockType block_type,
|
|
|
|
GetContext* get_context) const {
|
|
|
|
const size_t read_amp_bytes_per_bit =
|
|
|
|
block_type == BlockType::kData
|
|
|
|
? rep_->table_options.read_amp_bytes_per_bit
|
|
|
|
: 0;
|
|
|
|
assert(block);
|
|
|
|
assert(block->IsEmpty());
|
|
|
|
|
|
|
|
Status s;
|
|
|
|
BlockContents* compressed_block = nullptr;
|
|
|
|
Cache::Handle* block_cache_compressed_handle = nullptr;
|
|
|
|
|
|
|
|
// Lookup uncompressed cache first
|
|
|
|
if (block_cache != nullptr) {
|
|
|
|
auto cache_handle = GetEntryFromCache(block_cache, block_cache_key,
|
|
|
|
block_type, get_context);
|
|
|
|
if (cache_handle != nullptr) {
|
|
|
|
block->SetCachedValue(
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
reinterpret_cast<TBlocklike*>(block_cache->Value(cache_handle)),
|
|
|
|
block_cache, cache_handle);
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// If not found, search from the compressed block cache.
|
|
|
|
assert(block->IsEmpty());
|
|
|
|
|
|
|
|
if (block_cache_compressed == nullptr) {
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
assert(!compressed_block_cache_key.empty());
|
|
|
|
block_cache_compressed_handle =
|
|
|
|
block_cache_compressed->Lookup(compressed_block_cache_key);
|
|
|
|
|
|
|
|
Statistics* statistics = rep_->ioptions.statistics;
|
|
|
|
|
|
|
|
// if we found in the compressed cache, then uncompress and insert into
|
|
|
|
// uncompressed cache
|
|
|
|
if (block_cache_compressed_handle == nullptr) {
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_COMPRESSED_MISS);
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
// found compressed block
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_COMPRESSED_HIT);
|
|
|
|
compressed_block = reinterpret_cast<BlockContents*>(
|
|
|
|
block_cache_compressed->Value(block_cache_compressed_handle));
|
|
|
|
CompressionType compression_type = compressed_block->get_compression_type();
|
|
|
|
assert(compression_type != kNoCompression);
|
|
|
|
|
|
|
|
// Retrieve the uncompressed contents into a new buffer
|
|
|
|
BlockContents contents;
|
|
|
|
UncompressionContext context(compression_type);
|
|
|
|
UncompressionInfo info(context, uncompression_dict, compression_type);
|
|
|
|
s = UncompressBlockContents(
|
|
|
|
info, compressed_block->data.data(), compressed_block->data.size(),
|
|
|
|
&contents, rep_->table_options.format_version, rep_->ioptions,
|
|
|
|
GetMemoryAllocator(rep_->table_options));
|
|
|
|
|
|
|
|
// Insert uncompressed block into block cache
|
|
|
|
if (s.ok()) {
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
std::unique_ptr<TBlocklike> block_holder(
|
|
|
|
BlocklikeTraits<TBlocklike>::Create(
|
|
|
|
std::move(contents), read_amp_bytes_per_bit, statistics,
|
|
|
|
rep_->blocks_definitely_zstd_compressed,
|
|
|
|
rep_->table_options.filter_policy.get())); // uncompressed block
|
|
|
|
|
|
|
|
if (block_cache != nullptr && block_holder->own_bytes() &&
|
|
|
|
read_options.fill_cache) {
|
|
|
|
size_t charge = block_holder->ApproximateMemoryUsage();
|
|
|
|
Cache::Handle* cache_handle = nullptr;
|
|
|
|
s = block_cache->Insert(block_cache_key, block_holder.get(), charge,
|
|
|
|
&DeleteCachedEntry<TBlocklike>, &cache_handle);
|
|
|
|
if (s.ok()) {
|
|
|
|
assert(cache_handle != nullptr);
|
|
|
|
block->SetCachedValue(block_holder.release(), block_cache,
|
|
|
|
cache_handle);
|
|
|
|
|
|
|
|
UpdateCacheInsertionMetrics(block_type, get_context, charge,
|
|
|
|
s.IsOkOverwritten());
|
|
|
|
} else {
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_ADD_FAILURES);
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
block->SetOwnedValue(block_holder.release());
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// Release hold on compressed cache entry
|
|
|
|
block_cache_compressed->Release(block_cache_compressed_handle);
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
template <typename TBlocklike>
|
|
|
|
Status BlockBasedTable::PutDataBlockToCache(
|
|
|
|
const Slice& block_cache_key, const Slice& compressed_block_cache_key,
|
|
|
|
Cache* block_cache, Cache* block_cache_compressed,
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
CachableEntry<TBlocklike>* cached_block, BlockContents* raw_block_contents,
|
|
|
|
CompressionType raw_block_comp_type,
|
|
|
|
const UncompressionDict& uncompression_dict,
|
|
|
|
MemoryAllocator* memory_allocator, BlockType block_type,
|
|
|
|
GetContext* get_context) const {
|
|
|
|
const ImmutableCFOptions& ioptions = rep_->ioptions;
|
|
|
|
const uint32_t format_version = rep_->table_options.format_version;
|
|
|
|
const size_t read_amp_bytes_per_bit =
|
|
|
|
block_type == BlockType::kData
|
|
|
|
? rep_->table_options.read_amp_bytes_per_bit
|
|
|
|
: 0;
|
|
|
|
const Cache::Priority priority =
|
|
|
|
rep_->table_options.cache_index_and_filter_blocks_with_high_priority &&
|
|
|
|
(block_type == BlockType::kFilter ||
|
|
|
|
block_type == BlockType::kCompressionDictionary ||
|
|
|
|
block_type == BlockType::kIndex)
|
|
|
|
? Cache::Priority::HIGH
|
|
|
|
: Cache::Priority::LOW;
|
|
|
|
assert(cached_block);
|
|
|
|
assert(cached_block->IsEmpty());
|
|
|
|
|
|
|
|
Status s;
|
|
|
|
Statistics* statistics = ioptions.statistics;
|
|
|
|
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
std::unique_ptr<TBlocklike> block_holder;
|
|
|
|
if (raw_block_comp_type != kNoCompression) {
|
|
|
|
// Retrieve the uncompressed contents into a new buffer
|
|
|
|
BlockContents uncompressed_block_contents;
|
|
|
|
UncompressionContext context(raw_block_comp_type);
|
|
|
|
UncompressionInfo info(context, uncompression_dict, raw_block_comp_type);
|
|
|
|
s = UncompressBlockContents(info, raw_block_contents->data.data(),
|
|
|
|
raw_block_contents->data.size(),
|
|
|
|
&uncompressed_block_contents, format_version,
|
|
|
|
ioptions, memory_allocator);
|
|
|
|
if (!s.ok()) {
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
block_holder.reset(BlocklikeTraits<TBlocklike>::Create(
|
|
|
|
std::move(uncompressed_block_contents), read_amp_bytes_per_bit,
|
|
|
|
statistics, rep_->blocks_definitely_zstd_compressed,
|
|
|
|
rep_->table_options.filter_policy.get()));
|
|
|
|
} else {
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
block_holder.reset(BlocklikeTraits<TBlocklike>::Create(
|
|
|
|
std::move(*raw_block_contents), read_amp_bytes_per_bit, statistics,
|
|
|
|
rep_->blocks_definitely_zstd_compressed,
|
|
|
|
rep_->table_options.filter_policy.get()));
|
|
|
|
}
|
|
|
|
|
|
|
|
// Insert compressed block into compressed block cache.
|
|
|
|
// Release the hold on the compressed cache entry immediately.
|
|
|
|
if (block_cache_compressed != nullptr &&
|
|
|
|
raw_block_comp_type != kNoCompression && raw_block_contents != nullptr &&
|
|
|
|
raw_block_contents->own_bytes()) {
|
|
|
|
#ifndef NDEBUG
|
|
|
|
assert(raw_block_contents->is_raw_block);
|
|
|
|
#endif // NDEBUG
|
|
|
|
|
|
|
|
// We cannot directly put raw_block_contents because this could point to
|
|
|
|
// an object in the stack.
|
|
|
|
BlockContents* block_cont_for_comp_cache =
|
|
|
|
new BlockContents(std::move(*raw_block_contents));
|
|
|
|
s = block_cache_compressed->Insert(
|
|
|
|
compressed_block_cache_key, block_cont_for_comp_cache,
|
|
|
|
block_cont_for_comp_cache->ApproximateMemoryUsage(),
|
|
|
|
&DeleteCachedEntry<BlockContents>);
|
|
|
|
if (s.ok()) {
|
|
|
|
// Avoid the following code to delete this cached block.
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_COMPRESSED_ADD);
|
|
|
|
} else {
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_COMPRESSED_ADD_FAILURES);
|
|
|
|
delete block_cont_for_comp_cache;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// insert into uncompressed block cache
|
|
|
|
if (block_cache != nullptr && block_holder->own_bytes()) {
|
|
|
|
size_t charge = block_holder->ApproximateMemoryUsage();
|
|
|
|
Cache::Handle* cache_handle = nullptr;
|
|
|
|
s = block_cache->Insert(block_cache_key, block_holder.get(), charge,
|
|
|
|
&DeleteCachedEntry<TBlocklike>, &cache_handle,
|
|
|
|
priority);
|
|
|
|
if (s.ok()) {
|
|
|
|
assert(cache_handle != nullptr);
|
|
|
|
cached_block->SetCachedValue(block_holder.release(), block_cache,
|
|
|
|
cache_handle);
|
|
|
|
|
|
|
|
UpdateCacheInsertionMetrics(block_type, get_context, charge,
|
|
|
|
s.IsOkOverwritten());
|
|
|
|
} else {
|
|
|
|
RecordTick(statistics, BLOCK_CACHE_ADD_FAILURES);
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
cached_block->SetOwnedValue(block_holder.release());
|
|
|
|
}
|
|
|
|
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
std::unique_ptr<FilterBlockReader> BlockBasedTable::CreateFilterBlockReader(
|
|
|
|
const ReadOptions& ro, FilePrefetchBuffer* prefetch_buffer, bool use_cache,
|
|
|
|
bool prefetch, bool pin, BlockCacheLookupContext* lookup_context) {
|
|
|
|
auto& rep = rep_;
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
auto filter_type = rep->filter_type;
|
|
|
|
if (filter_type == Rep::FilterType::kNoFilter) {
|
|
|
|
return std::unique_ptr<FilterBlockReader>();
|
|
|
|
}
|
|
|
|
|
|
|
|
assert(rep->filter_policy);
|
|
|
|
|
|
|
|
switch (filter_type) {
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
case Rep::FilterType::kPartitionedFilter:
|
|
|
|
return PartitionedFilterBlockReader::Create(
|
|
|
|
this, ro, prefetch_buffer, use_cache, prefetch, pin, lookup_context);
|
|
|
|
|
|
|
|
case Rep::FilterType::kBlockFilter:
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
return BlockBasedFilterBlockReader::Create(
|
|
|
|
this, ro, prefetch_buffer, use_cache, prefetch, pin, lookup_context);
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
|
|
|
|
case Rep::FilterType::kFullFilter:
|
|
|
|
return FullFilterBlockReader::Create(this, ro, prefetch_buffer, use_cache,
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
prefetch, pin, lookup_context);
|
|
|
|
|
|
|
|
default:
|
|
|
|
// filter_type is either kNoFilter (exited the function at the first if),
|
|
|
|
// or it must be covered in this switch block
|
|
|
|
assert(false);
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
return std::unique_ptr<FilterBlockReader>();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// disable_prefix_seek should be set to true when prefix_extractor found in SST
|
|
|
|
// differs from the one in mutable_cf_options and index type is HashBasedIndex
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
InternalIteratorBase<IndexValue>* BlockBasedTable::NewIndexIterator(
|
|
|
|
const ReadOptions& read_options, bool disable_prefix_seek,
|
|
|
|
IndexBlockIter* input_iter, GetContext* get_context,
|
|
|
|
BlockCacheLookupContext* lookup_context) const {
|
Move the index readers out of the block cache (#5298)
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
6 years ago
|
|
|
assert(rep_ != nullptr);
|
|
|
|
assert(rep_->index_reader != nullptr);
|
|
|
|
|
Move the index readers out of the block cache (#5298)
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
6 years ago
|
|
|
// We don't return pinned data from index blocks, so no need
|
|
|
|
// to set `block_contents_pinned`.
|
Move the index readers out of the block cache (#5298)
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
6 years ago
|
|
|
return rep_->index_reader->NewIterator(read_options, disable_prefix_seek,
|
|
|
|
input_iter, get_context,
|
|
|
|
lookup_context);
|
|
|
|
}
|
|
|
|
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
template <>
|
|
|
|
DataBlockIter* BlockBasedTable::InitBlockIterator<DataBlockIter>(
|
|
|
|
const Rep* rep, Block* block, BlockType block_type,
|
|
|
|
DataBlockIter* input_iter, bool block_contents_pinned) {
|
|
|
|
return block->NewDataIterator(rep->internal_comparator.user_comparator(),
|
|
|
|
rep->get_global_seqno(block_type), input_iter,
|
|
|
|
rep->ioptions.statistics,
|
|
|
|
block_contents_pinned);
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
}
|
|
|
|
|
|
|
|
template <>
|
|
|
|
IndexBlockIter* BlockBasedTable::InitBlockIterator<IndexBlockIter>(
|
|
|
|
const Rep* rep, Block* block, BlockType block_type,
|
|
|
|
IndexBlockIter* input_iter, bool block_contents_pinned) {
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
return block->NewIndexIterator(
|
|
|
|
rep->internal_comparator.user_comparator(),
|
|
|
|
rep->get_global_seqno(block_type), input_iter, rep->ioptions.statistics,
|
|
|
|
/* total_order_seek */ true, rep->index_has_first_key,
|
|
|
|
rep->index_key_includes_seq, rep->index_value_is_full,
|
|
|
|
block_contents_pinned);
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
}
|
|
|
|
|
|
|
|
// If contents is nullptr, this function looks up the block caches for the
|
|
|
|
// data block referenced by handle, and read the block from disk if necessary.
|
|
|
|
// If contents is non-null, it skips the cache lookup and disk read, since
|
|
|
|
// the caller has already read it. In both cases, if ro.fill_cache is true,
|
|
|
|
// it inserts the block into the block cache.
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
template <typename TBlocklike>
|
|
|
|
Status BlockBasedTable::MaybeReadBlockAndLoadToCache(
|
|
|
|
FilePrefetchBuffer* prefetch_buffer, const ReadOptions& ro,
|
|
|
|
const BlockHandle& handle, const UncompressionDict& uncompression_dict,
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
CachableEntry<TBlocklike>* block_entry, BlockType block_type,
|
|
|
|
GetContext* get_context, BlockCacheLookupContext* lookup_context,
|
|
|
|
BlockContents* contents) const {
|
|
|
|
assert(block_entry != nullptr);
|
|
|
|
const bool no_io = (ro.read_tier == kBlockCacheTier);
|
|
|
|
Cache* block_cache = rep_->table_options.block_cache.get();
|
|
|
|
Cache* block_cache_compressed =
|
|
|
|
rep_->table_options.block_cache_compressed.get();
|
|
|
|
|
|
|
|
// First, try to get the block from the cache
|
|
|
|
//
|
|
|
|
// If either block cache is enabled, we'll try to read from it.
|
|
|
|
Status s;
|
|
|
|
char cache_key[kMaxCacheKeyPrefixSize + kMaxVarint64Length];
|
|
|
|
char compressed_cache_key[kMaxCacheKeyPrefixSize + kMaxVarint64Length];
|
|
|
|
Slice key /* key to the block cache */;
|
|
|
|
Slice ckey /* key to the compressed block cache */;
|
|
|
|
bool is_cache_hit = false;
|
|
|
|
if (block_cache != nullptr || block_cache_compressed != nullptr) {
|
|
|
|
// create key for block cache
|
|
|
|
if (block_cache != nullptr) {
|
|
|
|
key = GetCacheKey(rep_->cache_key_prefix, rep_->cache_key_prefix_size,
|
|
|
|
handle, cache_key);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (block_cache_compressed != nullptr) {
|
|
|
|
ckey = GetCacheKey(rep_->compressed_cache_key_prefix,
|
|
|
|
rep_->compressed_cache_key_prefix_size, handle,
|
|
|
|
compressed_cache_key);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!contents) {
|
|
|
|
s = GetDataBlockFromCache(key, ckey, block_cache, block_cache_compressed,
|
|
|
|
ro, block_entry, uncompression_dict, block_type,
|
|
|
|
get_context);
|
|
|
|
if (block_entry->GetValue()) {
|
|
|
|
// TODO(haoyu): Differentiate cache hit on uncompressed block cache and
|
|
|
|
// compressed block cache.
|
|
|
|
is_cache_hit = true;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// Can't find the block from the cache. If I/O is allowed, read from the
|
|
|
|
// file.
|
|
|
|
if (block_entry->GetValue() == nullptr && !no_io && ro.fill_cache) {
|
|
|
|
Statistics* statistics = rep_->ioptions.statistics;
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
const bool maybe_compressed =
|
|
|
|
block_type != BlockType::kFilter &&
|
|
|
|
block_type != BlockType::kCompressionDictionary &&
|
|
|
|
rep_->blocks_maybe_compressed;
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
const bool do_uncompress = maybe_compressed && !block_cache_compressed;
|
|
|
|
CompressionType raw_block_comp_type;
|
|
|
|
BlockContents raw_block_contents;
|
|
|
|
if (!contents) {
|
|
|
|
StopWatch sw(rep_->ioptions.env, statistics, READ_BLOCK_GET_MICROS);
|
|
|
|
BlockFetcher block_fetcher(
|
|
|
|
rep_->file.get(), prefetch_buffer, rep_->footer, ro, handle,
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
&raw_block_contents, rep_->ioptions, do_uncompress,
|
|
|
|
maybe_compressed, block_type, uncompression_dict,
|
|
|
|
rep_->persistent_cache_options,
|
|
|
|
GetMemoryAllocator(rep_->table_options),
|
|
|
|
GetMemoryAllocatorForCompressedBlock(rep_->table_options));
|
|
|
|
s = block_fetcher.ReadBlockContents();
|
|
|
|
raw_block_comp_type = block_fetcher.get_compression_type();
|
|
|
|
contents = &raw_block_contents;
|
|
|
|
if (get_context) {
|
|
|
|
switch (block_type) {
|
|
|
|
case BlockType::kIndex:
|
|
|
|
++get_context->get_context_stats_.num_index_read;
|
|
|
|
break;
|
|
|
|
case BlockType::kFilter:
|
|
|
|
++get_context->get_context_stats_.num_filter_read;
|
|
|
|
break;
|
|
|
|
case BlockType::kData:
|
|
|
|
++get_context->get_context_stats_.num_data_read;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
raw_block_comp_type = contents->get_compression_type();
|
|
|
|
}
|
|
|
|
|
|
|
|
if (s.ok()) {
|
|
|
|
// If filling cache is allowed and a cache is configured, try to put the
|
|
|
|
// block to the cache.
|
|
|
|
s = PutDataBlockToCache(
|
|
|
|
key, ckey, block_cache, block_cache_compressed, block_entry,
|
|
|
|
contents, raw_block_comp_type, uncompression_dict,
|
|
|
|
GetMemoryAllocator(rep_->table_options), block_type, get_context);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// Fill lookup_context.
|
|
|
|
if (block_cache_tracer_ && block_cache_tracer_->is_tracing_enabled() &&
|
|
|
|
lookup_context) {
|
|
|
|
size_t usage = 0;
|
|
|
|
uint64_t nkeys = 0;
|
|
|
|
if (block_entry->GetValue()) {
|
|
|
|
// Approximate the number of keys in the block using restarts.
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
nkeys =
|
|
|
|
rep_->table_options.block_restart_interval *
|
|
|
|
BlocklikeTraits<TBlocklike>::GetNumRestarts(*block_entry->GetValue());
|
|
|
|
usage = block_entry->GetValue()->ApproximateMemoryUsage();
|
|
|
|
}
|
|
|
|
TraceType trace_block_type = TraceType::kTraceMax;
|
|
|
|
switch (block_type) {
|
|
|
|
case BlockType::kData:
|
|
|
|
trace_block_type = TraceType::kBlockTraceDataBlock;
|
|
|
|
break;
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
case BlockType::kFilter:
|
|
|
|
trace_block_type = TraceType::kBlockTraceFilterBlock;
|
|
|
|
break;
|
|
|
|
case BlockType::kCompressionDictionary:
|
|
|
|
trace_block_type = TraceType::kBlockTraceUncompressionDictBlock;
|
|
|
|
break;
|
|
|
|
case BlockType::kRangeDeletion:
|
|
|
|
trace_block_type = TraceType::kBlockTraceRangeDeletionBlock;
|
|
|
|
break;
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
case BlockType::kIndex:
|
|
|
|
trace_block_type = TraceType::kBlockTraceIndexBlock;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
// This cannot happen.
|
|
|
|
assert(false);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
bool no_insert = no_io || !ro.fill_cache;
|
|
|
|
if (BlockCacheTraceHelper::IsGetOrMultiGetOnDataBlock(
|
|
|
|
trace_block_type, lookup_context->caller)) {
|
|
|
|
// Defer logging the access to Get() and MultiGet() to trace additional
|
|
|
|
// information, e.g., referenced_key_exist_in_block.
|
|
|
|
|
|
|
|
// Make a copy of the block key here since it will be logged later.
|
|
|
|
lookup_context->FillLookupContext(
|
|
|
|
is_cache_hit, no_insert, trace_block_type,
|
|
|
|
/*block_size=*/usage, /*block_key=*/key.ToString(), nkeys);
|
|
|
|
} else {
|
|
|
|
// Avoid making copy of block_key and cf_name when constructing the access
|
|
|
|
// record.
|
|
|
|
BlockCacheTraceRecord access_record(
|
|
|
|
rep_->ioptions.env->NowMicros(),
|
|
|
|
/*block_key=*/"", trace_block_type,
|
|
|
|
/*block_size=*/usage, rep_->cf_id_for_tracing(),
|
|
|
|
/*cf_name=*/"", rep_->level_for_tracing(),
|
|
|
|
rep_->sst_number_for_tracing(), lookup_context->caller, is_cache_hit,
|
|
|
|
no_insert, lookup_context->get_id,
|
|
|
|
lookup_context->get_from_user_specified_snapshot,
|
|
|
|
/*referenced_key=*/"");
|
|
|
|
// TODO: Should handle this error?
|
|
|
|
block_cache_tracer_
|
|
|
|
->WriteBlockAccess(access_record, key, rep_->cf_name_for_tracing(),
|
|
|
|
lookup_context->referenced_key)
|
|
|
|
.PermitUncheckedError();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
assert(s.ok() || block_entry->GetValue() == nullptr);
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
// This function reads multiple data blocks from disk using Env::MultiRead()
|
|
|
|
// and optionally inserts them into the block cache. It uses the scratch
|
|
|
|
// buffer provided by the caller, which is contiguous. If scratch is a nullptr
|
|
|
|
// it allocates a separate buffer for each block. Typically, if the blocks
|
|
|
|
// need to be uncompressed and there is no compressed block cache, callers
|
|
|
|
// can allocate a temporary scratch buffer in order to minimize memory
|
|
|
|
// allocations.
|
|
|
|
// If options.fill_cache is true, it inserts the blocks into cache. If its
|
|
|
|
// false and scratch is non-null and the blocks are uncompressed, it copies
|
|
|
|
// the buffers to heap. In any case, the CachableEntry<Block> returned will
|
|
|
|
// own the data bytes.
|
Merge adjacent file block reads in RocksDB MultiGet() and Add uncompressed block to cache (#6089)
Summary:
In the current MultiGet, if the KV-pairs do not belong to the data blocks in the block cache, multiple blocks are read from a SST. It will trigger one block read for each block request and read them in parallel. In some cases, if some data blocks are adjacent in the SST, the reads for these blocks can be combined to a single large read, which can reduce the system calls and reduce the read latency if possible.
Considering to fill the block cache, if multiple data blocks are in the same memory buffer, we need to copy them to the heap separately. Therefore, only in the case that 1) data block compression is enabled, and 2) compressed block cache is null, we can do combined read. Otherwise, extra memory copy is needed, which may cause extra overhead. In the current case, data blocks will be uncompressed to a new memory space.
Also, in the case that 1) data block compression is enabled, and 2) compressed block cache is null, it is possible the data block is actually not compressed. In the current logic, these data blocks will not be added to the uncompressed_cache. So if memory buffer is shared and the data block is not compressed, the data block are copied to the head and fill the cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6089
Test Plan: Added test case to ParallelIO.MultiGet. Pass make asan_check
Differential Revision: D18734668
Pulled By: zhichao-cao
fbshipit-source-id: 67c5615ed373e51e42635fd74b36f8f3a66d5da4
5 years ago
|
|
|
// If compression is enabled and also there is no compressed block cache,
|
|
|
|
// the adjacent blocks are read out in one IO (combined read)
|
|
|
|
// batch - A MultiGetRange with only those keys with unique data blocks not
|
|
|
|
// found in cache
|
|
|
|
// handles - A vector of block handles. Some of them me be NULL handles
|
|
|
|
// scratch - An optional contiguous buffer to read compressed blocks into
|
|
|
|
void BlockBasedTable::RetrieveMultipleBlocks(
|
|
|
|
const ReadOptions& options, const MultiGetRange* batch,
|
|
|
|
const autovector<BlockHandle, MultiGetContext::MAX_BATCH_SIZE>* handles,
|
|
|
|
autovector<Status, MultiGetContext::MAX_BATCH_SIZE>* statuses,
|
|
|
|
autovector<CachableEntry<Block>, MultiGetContext::MAX_BATCH_SIZE>* results,
|
|
|
|
char* scratch, const UncompressionDict& uncompression_dict) const {
|
|
|
|
RandomAccessFileReader* file = rep_->file.get();
|
|
|
|
const Footer& footer = rep_->footer;
|
|
|
|
const ImmutableCFOptions& ioptions = rep_->ioptions;
|
|
|
|
size_t read_amp_bytes_per_bit = rep_->table_options.read_amp_bytes_per_bit;
|
|
|
|
MemoryAllocator* memory_allocator = GetMemoryAllocator(rep_->table_options);
|
|
|
|
|
|
|
|
if (ioptions.allow_mmap_reads) {
|
|
|
|
size_t idx_in_batch = 0;
|
|
|
|
for (auto mget_iter = batch->begin(); mget_iter != batch->end();
|
|
|
|
++mget_iter, ++idx_in_batch) {
|
|
|
|
BlockCacheLookupContext lookup_data_block_context(
|
|
|
|
TableReaderCaller::kUserMultiGet);
|
|
|
|
const BlockHandle& handle = (*handles)[idx_in_batch];
|
|
|
|
if (handle.IsNull()) {
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
(*statuses)[idx_in_batch] =
|
|
|
|
RetrieveBlock(nullptr, options, handle, uncompression_dict,
|
|
|
|
&(*results)[idx_in_batch], BlockType::kData,
|
|
|
|
mget_iter->get_context, &lookup_data_block_context,
|
|
|
|
/* for_compaction */ false, /* use_cache */ true);
|
|
|
|
}
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
// In direct IO mode, blocks share the direct io buffer.
|
|
|
|
// Otherwise, blocks share the scratch buffer.
|
|
|
|
const bool use_shared_buffer = file->use_direct_io() || scratch != nullptr;
|
|
|
|
|
Introduce a new storage specific Env API (#5761)
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
5 years ago
|
|
|
autovector<FSReadRequest, MultiGetContext::MAX_BATCH_SIZE> read_reqs;
|
|
|
|
size_t buf_offset = 0;
|
|
|
|
size_t idx_in_batch = 0;
|
Merge adjacent file block reads in RocksDB MultiGet() and Add uncompressed block to cache (#6089)
Summary:
In the current MultiGet, if the KV-pairs do not belong to the data blocks in the block cache, multiple blocks are read from a SST. It will trigger one block read for each block request and read them in parallel. In some cases, if some data blocks are adjacent in the SST, the reads for these blocks can be combined to a single large read, which can reduce the system calls and reduce the read latency if possible.
Considering to fill the block cache, if multiple data blocks are in the same memory buffer, we need to copy them to the heap separately. Therefore, only in the case that 1) data block compression is enabled, and 2) compressed block cache is null, we can do combined read. Otherwise, extra memory copy is needed, which may cause extra overhead. In the current case, data blocks will be uncompressed to a new memory space.
Also, in the case that 1) data block compression is enabled, and 2) compressed block cache is null, it is possible the data block is actually not compressed. In the current logic, these data blocks will not be added to the uncompressed_cache. So if memory buffer is shared and the data block is not compressed, the data block are copied to the head and fill the cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6089
Test Plan: Added test case to ParallelIO.MultiGet. Pass make asan_check
Differential Revision: D18734668
Pulled By: zhichao-cao
fbshipit-source-id: 67c5615ed373e51e42635fd74b36f8f3a66d5da4
5 years ago
|
|
|
|
|
|
|
uint64_t prev_offset = 0;
|
|
|
|
size_t prev_len = 0;
|
|
|
|
autovector<size_t, MultiGetContext::MAX_BATCH_SIZE> req_idx_for_block;
|
|
|
|
autovector<size_t, MultiGetContext::MAX_BATCH_SIZE> req_offset_for_block;
|
|
|
|
for (auto mget_iter = batch->begin(); mget_iter != batch->end();
|
|
|
|
++mget_iter, ++idx_in_batch) {
|
|
|
|
const BlockHandle& handle = (*handles)[idx_in_batch];
|
|
|
|
if (handle.IsNull()) {
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
Merge adjacent file block reads in RocksDB MultiGet() and Add uncompressed block to cache (#6089)
Summary:
In the current MultiGet, if the KV-pairs do not belong to the data blocks in the block cache, multiple blocks are read from a SST. It will trigger one block read for each block request and read them in parallel. In some cases, if some data blocks are adjacent in the SST, the reads for these blocks can be combined to a single large read, which can reduce the system calls and reduce the read latency if possible.
Considering to fill the block cache, if multiple data blocks are in the same memory buffer, we need to copy them to the heap separately. Therefore, only in the case that 1) data block compression is enabled, and 2) compressed block cache is null, we can do combined read. Otherwise, extra memory copy is needed, which may cause extra overhead. In the current case, data blocks will be uncompressed to a new memory space.
Also, in the case that 1) data block compression is enabled, and 2) compressed block cache is null, it is possible the data block is actually not compressed. In the current logic, these data blocks will not be added to the uncompressed_cache. So if memory buffer is shared and the data block is not compressed, the data block are copied to the head and fill the cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6089
Test Plan: Added test case to ParallelIO.MultiGet. Pass make asan_check
Differential Revision: D18734668
Pulled By: zhichao-cao
fbshipit-source-id: 67c5615ed373e51e42635fd74b36f8f3a66d5da4
5 years ago
|
|
|
size_t prev_end = static_cast<size_t>(prev_offset) + prev_len;
|
|
|
|
|
|
|
|
// If current block is adjacent to the previous one, at the same time,
|
|
|
|
// compression is enabled and there is no compressed cache, we combine
|
|
|
|
// the two block read as one.
|
|
|
|
// We don't combine block reads here in direct IO mode, because when doing
|
|
|
|
// direct IO read, the block requests will be realigned and merged when
|
|
|
|
// necessary.
|
|
|
|
if (use_shared_buffer && !file->use_direct_io() &&
|
|
|
|
prev_end == handle.offset()) {
|
Merge adjacent file block reads in RocksDB MultiGet() and Add uncompressed block to cache (#6089)
Summary:
In the current MultiGet, if the KV-pairs do not belong to the data blocks in the block cache, multiple blocks are read from a SST. It will trigger one block read for each block request and read them in parallel. In some cases, if some data blocks are adjacent in the SST, the reads for these blocks can be combined to a single large read, which can reduce the system calls and reduce the read latency if possible.
Considering to fill the block cache, if multiple data blocks are in the same memory buffer, we need to copy them to the heap separately. Therefore, only in the case that 1) data block compression is enabled, and 2) compressed block cache is null, we can do combined read. Otherwise, extra memory copy is needed, which may cause extra overhead. In the current case, data blocks will be uncompressed to a new memory space.
Also, in the case that 1) data block compression is enabled, and 2) compressed block cache is null, it is possible the data block is actually not compressed. In the current logic, these data blocks will not be added to the uncompressed_cache. So if memory buffer is shared and the data block is not compressed, the data block are copied to the head and fill the cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6089
Test Plan: Added test case to ParallelIO.MultiGet. Pass make asan_check
Differential Revision: D18734668
Pulled By: zhichao-cao
fbshipit-source-id: 67c5615ed373e51e42635fd74b36f8f3a66d5da4
5 years ago
|
|
|
req_offset_for_block.emplace_back(prev_len);
|
|
|
|
prev_len += block_size(handle);
|
|
|
|
} else {
|
|
|
|
// No compression or current block and previous one is not adjacent:
|
|
|
|
// Step 1, create a new request for previous blocks
|
|
|
|
if (prev_len != 0) {
|
|
|
|
FSReadRequest req;
|
|
|
|
req.offset = prev_offset;
|
|
|
|
req.len = prev_len;
|
|
|
|
if (file->use_direct_io()) {
|
|
|
|
req.scratch = nullptr;
|
|
|
|
} else if (use_shared_buffer) {
|
Merge adjacent file block reads in RocksDB MultiGet() and Add uncompressed block to cache (#6089)
Summary:
In the current MultiGet, if the KV-pairs do not belong to the data blocks in the block cache, multiple blocks are read from a SST. It will trigger one block read for each block request and read them in parallel. In some cases, if some data blocks are adjacent in the SST, the reads for these blocks can be combined to a single large read, which can reduce the system calls and reduce the read latency if possible.
Considering to fill the block cache, if multiple data blocks are in the same memory buffer, we need to copy them to the heap separately. Therefore, only in the case that 1) data block compression is enabled, and 2) compressed block cache is null, we can do combined read. Otherwise, extra memory copy is needed, which may cause extra overhead. In the current case, data blocks will be uncompressed to a new memory space.
Also, in the case that 1) data block compression is enabled, and 2) compressed block cache is null, it is possible the data block is actually not compressed. In the current logic, these data blocks will not be added to the uncompressed_cache. So if memory buffer is shared and the data block is not compressed, the data block are copied to the head and fill the cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6089
Test Plan: Added test case to ParallelIO.MultiGet. Pass make asan_check
Differential Revision: D18734668
Pulled By: zhichao-cao
fbshipit-source-id: 67c5615ed373e51e42635fd74b36f8f3a66d5da4
5 years ago
|
|
|
req.scratch = scratch + buf_offset;
|
|
|
|
buf_offset += req.len;
|
|
|
|
} else {
|
|
|
|
req.scratch = new char[req.len];
|
Merge adjacent file block reads in RocksDB MultiGet() and Add uncompressed block to cache (#6089)
Summary:
In the current MultiGet, if the KV-pairs do not belong to the data blocks in the block cache, multiple blocks are read from a SST. It will trigger one block read for each block request and read them in parallel. In some cases, if some data blocks are adjacent in the SST, the reads for these blocks can be combined to a single large read, which can reduce the system calls and reduce the read latency if possible.
Considering to fill the block cache, if multiple data blocks are in the same memory buffer, we need to copy them to the heap separately. Therefore, only in the case that 1) data block compression is enabled, and 2) compressed block cache is null, we can do combined read. Otherwise, extra memory copy is needed, which may cause extra overhead. In the current case, data blocks will be uncompressed to a new memory space.
Also, in the case that 1) data block compression is enabled, and 2) compressed block cache is null, it is possible the data block is actually not compressed. In the current logic, these data blocks will not be added to the uncompressed_cache. So if memory buffer is shared and the data block is not compressed, the data block are copied to the head and fill the cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6089
Test Plan: Added test case to ParallelIO.MultiGet. Pass make asan_check
Differential Revision: D18734668
Pulled By: zhichao-cao
fbshipit-source-id: 67c5615ed373e51e42635fd74b36f8f3a66d5da4
5 years ago
|
|
|
}
|
|
|
|
read_reqs.emplace_back(req);
|
|
|
|
}
|
|
|
|
|
|
|
|
// Step 2, remeber the previous block info
|
|
|
|
prev_offset = handle.offset();
|
|
|
|
prev_len = block_size(handle);
|
|
|
|
req_offset_for_block.emplace_back(0);
|
|
|
|
}
|
|
|
|
req_idx_for_block.emplace_back(read_reqs.size());
|
|
|
|
}
|
|
|
|
// Handle the last block and process the pending last request
|
|
|
|
if (prev_len != 0) {
|
Introduce a new storage specific Env API (#5761)
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
5 years ago
|
|
|
FSReadRequest req;
|
Merge adjacent file block reads in RocksDB MultiGet() and Add uncompressed block to cache (#6089)
Summary:
In the current MultiGet, if the KV-pairs do not belong to the data blocks in the block cache, multiple blocks are read from a SST. It will trigger one block read for each block request and read them in parallel. In some cases, if some data blocks are adjacent in the SST, the reads for these blocks can be combined to a single large read, which can reduce the system calls and reduce the read latency if possible.
Considering to fill the block cache, if multiple data blocks are in the same memory buffer, we need to copy them to the heap separately. Therefore, only in the case that 1) data block compression is enabled, and 2) compressed block cache is null, we can do combined read. Otherwise, extra memory copy is needed, which may cause extra overhead. In the current case, data blocks will be uncompressed to a new memory space.
Also, in the case that 1) data block compression is enabled, and 2) compressed block cache is null, it is possible the data block is actually not compressed. In the current logic, these data blocks will not be added to the uncompressed_cache. So if memory buffer is shared and the data block is not compressed, the data block are copied to the head and fill the cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6089
Test Plan: Added test case to ParallelIO.MultiGet. Pass make asan_check
Differential Revision: D18734668
Pulled By: zhichao-cao
fbshipit-source-id: 67c5615ed373e51e42635fd74b36f8f3a66d5da4
5 years ago
|
|
|
req.offset = prev_offset;
|
|
|
|
req.len = prev_len;
|
|
|
|
if (file->use_direct_io()) {
|
|
|
|
req.scratch = nullptr;
|
|
|
|
} else if (use_shared_buffer) {
|
|
|
|
req.scratch = scratch + buf_offset;
|
|
|
|
} else {
|
|
|
|
req.scratch = new char[req.len];
|
|
|
|
}
|
|
|
|
read_reqs.emplace_back(req);
|
|
|
|
}
|
|
|
|
|
|
|
|
AlignedBuf direct_io_buf;
|
|
|
|
{
|
|
|
|
IOOptions opts;
|
|
|
|
IOStatus s = PrepareIOFromReadOptions(options, file->env(), opts);
|
|
|
|
if (s.IsTimedOut()) {
|
|
|
|
for (FSReadRequest& req : read_reqs) {
|
|
|
|
req.status = s;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
// How to handle this status code?
|
|
|
|
file->MultiRead(opts, &read_reqs[0], read_reqs.size(), &direct_io_buf)
|
|
|
|
.PermitUncheckedError();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
idx_in_batch = 0;
|
Merge adjacent file block reads in RocksDB MultiGet() and Add uncompressed block to cache (#6089)
Summary:
In the current MultiGet, if the KV-pairs do not belong to the data blocks in the block cache, multiple blocks are read from a SST. It will trigger one block read for each block request and read them in parallel. In some cases, if some data blocks are adjacent in the SST, the reads for these blocks can be combined to a single large read, which can reduce the system calls and reduce the read latency if possible.
Considering to fill the block cache, if multiple data blocks are in the same memory buffer, we need to copy them to the heap separately. Therefore, only in the case that 1) data block compression is enabled, and 2) compressed block cache is null, we can do combined read. Otherwise, extra memory copy is needed, which may cause extra overhead. In the current case, data blocks will be uncompressed to a new memory space.
Also, in the case that 1) data block compression is enabled, and 2) compressed block cache is null, it is possible the data block is actually not compressed. In the current logic, these data blocks will not be added to the uncompressed_cache. So if memory buffer is shared and the data block is not compressed, the data block are copied to the head and fill the cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6089
Test Plan: Added test case to ParallelIO.MultiGet. Pass make asan_check
Differential Revision: D18734668
Pulled By: zhichao-cao
fbshipit-source-id: 67c5615ed373e51e42635fd74b36f8f3a66d5da4
5 years ago
|
|
|
size_t valid_batch_idx = 0;
|
|
|
|
for (auto mget_iter = batch->begin(); mget_iter != batch->end();
|
|
|
|
++mget_iter, ++idx_in_batch) {
|
|
|
|
const BlockHandle& handle = (*handles)[idx_in_batch];
|
|
|
|
|
|
|
|
if (handle.IsNull()) {
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
Merge adjacent file block reads in RocksDB MultiGet() and Add uncompressed block to cache (#6089)
Summary:
In the current MultiGet, if the KV-pairs do not belong to the data blocks in the block cache, multiple blocks are read from a SST. It will trigger one block read for each block request and read them in parallel. In some cases, if some data blocks are adjacent in the SST, the reads for these blocks can be combined to a single large read, which can reduce the system calls and reduce the read latency if possible.
Considering to fill the block cache, if multiple data blocks are in the same memory buffer, we need to copy them to the heap separately. Therefore, only in the case that 1) data block compression is enabled, and 2) compressed block cache is null, we can do combined read. Otherwise, extra memory copy is needed, which may cause extra overhead. In the current case, data blocks will be uncompressed to a new memory space.
Also, in the case that 1) data block compression is enabled, and 2) compressed block cache is null, it is possible the data block is actually not compressed. In the current logic, these data blocks will not be added to the uncompressed_cache. So if memory buffer is shared and the data block is not compressed, the data block are copied to the head and fill the cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6089
Test Plan: Added test case to ParallelIO.MultiGet. Pass make asan_check
Differential Revision: D18734668
Pulled By: zhichao-cao
fbshipit-source-id: 67c5615ed373e51e42635fd74b36f8f3a66d5da4
5 years ago
|
|
|
assert(valid_batch_idx < req_idx_for_block.size());
|
|
|
|
assert(valid_batch_idx < req_offset_for_block.size());
|
|
|
|
assert(req_idx_for_block[valid_batch_idx] < read_reqs.size());
|
|
|
|
size_t& req_idx = req_idx_for_block[valid_batch_idx];
|
|
|
|
size_t& req_offset = req_offset_for_block[valid_batch_idx];
|
|
|
|
valid_batch_idx++;
|
|
|
|
FSReadRequest& req = read_reqs[req_idx];
|
|
|
|
Status s = req.status;
|
|
|
|
if (s.ok()) {
|
|
|
|
if ((req.result.size() != req.len) ||
|
|
|
|
(req_offset + block_size(handle) > req.result.size())) {
|
Merge adjacent file block reads in RocksDB MultiGet() and Add uncompressed block to cache (#6089)
Summary:
In the current MultiGet, if the KV-pairs do not belong to the data blocks in the block cache, multiple blocks are read from a SST. It will trigger one block read for each block request and read them in parallel. In some cases, if some data blocks are adjacent in the SST, the reads for these blocks can be combined to a single large read, which can reduce the system calls and reduce the read latency if possible.
Considering to fill the block cache, if multiple data blocks are in the same memory buffer, we need to copy them to the heap separately. Therefore, only in the case that 1) data block compression is enabled, and 2) compressed block cache is null, we can do combined read. Otherwise, extra memory copy is needed, which may cause extra overhead. In the current case, data blocks will be uncompressed to a new memory space.
Also, in the case that 1) data block compression is enabled, and 2) compressed block cache is null, it is possible the data block is actually not compressed. In the current logic, these data blocks will not be added to the uncompressed_cache. So if memory buffer is shared and the data block is not compressed, the data block are copied to the head and fill the cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6089
Test Plan: Added test case to ParallelIO.MultiGet. Pass make asan_check
Differential Revision: D18734668
Pulled By: zhichao-cao
fbshipit-source-id: 67c5615ed373e51e42635fd74b36f8f3a66d5da4
5 years ago
|
|
|
s = Status::Corruption(
|
|
|
|
"truncated block read from " + rep_->file->file_name() +
|
|
|
|
" offset " + ToString(handle.offset()) + ", expected " +
|
|
|
|
ToString(req.len) + " bytes, got " + ToString(req.result.size()));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
BlockContents raw_block_contents;
|
|
|
|
if (s.ok()) {
|
|
|
|
if (!use_shared_buffer) {
|
|
|
|
// We allocated a buffer for this block. Give ownership of it to
|
|
|
|
// BlockContents so it can free the memory
|
|
|
|
assert(req.result.data() == req.scratch);
|
|
|
|
assert(req.result.size() == block_size(handle));
|
|
|
|
assert(req_offset == 0);
|
|
|
|
std::unique_ptr<char[]> raw_block(req.scratch);
|
|
|
|
raw_block_contents = BlockContents(std::move(raw_block), handle.size());
|
|
|
|
} else {
|
|
|
|
// We used the scratch buffer or direct io buffer
|
|
|
|
// which are shared by the blocks.
|
|
|
|
// raw_block_contents does not have the ownership.
|
|
|
|
raw_block_contents =
|
|
|
|
BlockContents(Slice(req.result.data() + req_offset, handle.size()));
|
|
|
|
}
|
|
|
|
#ifndef NDEBUG
|
|
|
|
raw_block_contents.is_raw_block = true;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
if (options.verify_checksums) {
|
|
|
|
PERF_TIMER_GUARD(block_checksum_time);
|
|
|
|
const char* data = req.result.data();
|
|
|
|
// Since the scratch might be shared, the offset of the data block in
|
|
|
|
// the buffer might not be 0. req.result.data() only point to the
|
|
|
|
// begin address of each read request, we need to add the offset
|
|
|
|
// in each read request. Checksum is stored in the block trailer,
|
|
|
|
// beyond the payload size.
|
|
|
|
s = ROCKSDB_NAMESPACE::VerifyBlockChecksum(
|
|
|
|
footer.checksum(), data + req_offset, handle.size(),
|
|
|
|
rep_->file->file_name(), handle.offset());
|
|
|
|
TEST_SYNC_POINT_CALLBACK("RetrieveMultipleBlocks:VerifyChecksum", &s);
|
|
|
|
}
|
|
|
|
} else if (!use_shared_buffer) {
|
|
|
|
// Free the allocated scratch buffer.
|
|
|
|
delete[] req.scratch;
|
|
|
|
}
|
Merge adjacent file block reads in RocksDB MultiGet() and Add uncompressed block to cache (#6089)
Summary:
In the current MultiGet, if the KV-pairs do not belong to the data blocks in the block cache, multiple blocks are read from a SST. It will trigger one block read for each block request and read them in parallel. In some cases, if some data blocks are adjacent in the SST, the reads for these blocks can be combined to a single large read, which can reduce the system calls and reduce the read latency if possible.
Considering to fill the block cache, if multiple data blocks are in the same memory buffer, we need to copy them to the heap separately. Therefore, only in the case that 1) data block compression is enabled, and 2) compressed block cache is null, we can do combined read. Otherwise, extra memory copy is needed, which may cause extra overhead. In the current case, data blocks will be uncompressed to a new memory space.
Also, in the case that 1) data block compression is enabled, and 2) compressed block cache is null, it is possible the data block is actually not compressed. In the current logic, these data blocks will not be added to the uncompressed_cache. So if memory buffer is shared and the data block is not compressed, the data block are copied to the head and fill the cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6089
Test Plan: Added test case to ParallelIO.MultiGet. Pass make asan_check
Differential Revision: D18734668
Pulled By: zhichao-cao
fbshipit-source-id: 67c5615ed373e51e42635fd74b36f8f3a66d5da4
5 years ago
|
|
|
|
|
|
|
if (s.ok()) {
|
|
|
|
// When the blocks share the same underlying buffer (scratch or direct io
|
|
|
|
// buffer), we may need to manually copy the block into heap if the raw
|
|
|
|
// block has to be inserted into a cache. That falls into th following
|
|
|
|
// cases -
|
|
|
|
// 1. Raw block is not compressed, it needs to be inserted into the
|
|
|
|
// uncompressed block cache if there is one
|
|
|
|
// 2. If the raw block is compressed, it needs to be inserted into the
|
|
|
|
// compressed block cache if there is one
|
|
|
|
//
|
|
|
|
// In all other cases, the raw block is either uncompressed into a heap
|
|
|
|
// buffer or there is no cache at all.
|
Merge adjacent file block reads in RocksDB MultiGet() and Add uncompressed block to cache (#6089)
Summary:
In the current MultiGet, if the KV-pairs do not belong to the data blocks in the block cache, multiple blocks are read from a SST. It will trigger one block read for each block request and read them in parallel. In some cases, if some data blocks are adjacent in the SST, the reads for these blocks can be combined to a single large read, which can reduce the system calls and reduce the read latency if possible.
Considering to fill the block cache, if multiple data blocks are in the same memory buffer, we need to copy them to the heap separately. Therefore, only in the case that 1) data block compression is enabled, and 2) compressed block cache is null, we can do combined read. Otherwise, extra memory copy is needed, which may cause extra overhead. In the current case, data blocks will be uncompressed to a new memory space.
Also, in the case that 1) data block compression is enabled, and 2) compressed block cache is null, it is possible the data block is actually not compressed. In the current logic, these data blocks will not be added to the uncompressed_cache. So if memory buffer is shared and the data block is not compressed, the data block are copied to the head and fill the cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6089
Test Plan: Added test case to ParallelIO.MultiGet. Pass make asan_check
Differential Revision: D18734668
Pulled By: zhichao-cao
fbshipit-source-id: 67c5615ed373e51e42635fd74b36f8f3a66d5da4
5 years ago
|
|
|
CompressionType compression_type =
|
|
|
|
raw_block_contents.get_compression_type();
|
|
|
|
if (use_shared_buffer && (compression_type == kNoCompression ||
|
|
|
|
(compression_type != kNoCompression &&
|
|
|
|
rep_->table_options.block_cache_compressed))) {
|
|
|
|
Slice raw = Slice(req.result.data() + req_offset, block_size(handle));
|
Merge adjacent file block reads in RocksDB MultiGet() and Add uncompressed block to cache (#6089)
Summary:
In the current MultiGet, if the KV-pairs do not belong to the data blocks in the block cache, multiple blocks are read from a SST. It will trigger one block read for each block request and read them in parallel. In some cases, if some data blocks are adjacent in the SST, the reads for these blocks can be combined to a single large read, which can reduce the system calls and reduce the read latency if possible.
Considering to fill the block cache, if multiple data blocks are in the same memory buffer, we need to copy them to the heap separately. Therefore, only in the case that 1) data block compression is enabled, and 2) compressed block cache is null, we can do combined read. Otherwise, extra memory copy is needed, which may cause extra overhead. In the current case, data blocks will be uncompressed to a new memory space.
Also, in the case that 1) data block compression is enabled, and 2) compressed block cache is null, it is possible the data block is actually not compressed. In the current logic, these data blocks will not be added to the uncompressed_cache. So if memory buffer is shared and the data block is not compressed, the data block are copied to the head and fill the cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6089
Test Plan: Added test case to ParallelIO.MultiGet. Pass make asan_check
Differential Revision: D18734668
Pulled By: zhichao-cao
fbshipit-source-id: 67c5615ed373e51e42635fd74b36f8f3a66d5da4
5 years ago
|
|
|
raw_block_contents = BlockContents(
|
|
|
|
CopyBufferToHeap(GetMemoryAllocator(rep_->table_options), raw),
|
|
|
|
handle.size());
|
|
|
|
#ifndef NDEBUG
|
|
|
|
raw_block_contents.is_raw_block = true;
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (s.ok()) {
|
|
|
|
if (options.fill_cache) {
|
|
|
|
BlockCacheLookupContext lookup_data_block_context(
|
|
|
|
TableReaderCaller::kUserMultiGet);
|
|
|
|
CachableEntry<Block>* block_entry = &(*results)[idx_in_batch];
|
|
|
|
// MaybeReadBlockAndLoadToCache will insert into the block caches if
|
|
|
|
// necessary. Since we're passing the raw block contents, it will
|
|
|
|
// avoid looking up the block cache
|
|
|
|
s = MaybeReadBlockAndLoadToCache(
|
|
|
|
nullptr, options, handle, uncompression_dict, block_entry,
|
|
|
|
BlockType::kData, mget_iter->get_context,
|
|
|
|
&lookup_data_block_context, &raw_block_contents);
|
|
|
|
|
|
|
|
// block_entry value could be null if no block cache is present, i.e
|
|
|
|
// BlockBasedTableOptions::no_block_cache is true and no compressed
|
|
|
|
// block cache is configured. In that case, fall
|
|
|
|
// through and set up the block explicitly
|
|
|
|
if (block_entry->GetValue() != nullptr) {
|
|
|
|
s.PermitUncheckedError();
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
CompressionType compression_type =
|
|
|
|
raw_block_contents.get_compression_type();
|
|
|
|
BlockContents contents;
|
|
|
|
if (compression_type != kNoCompression) {
|
|
|
|
UncompressionContext context(compression_type);
|
|
|
|
UncompressionInfo info(context, uncompression_dict, compression_type);
|
Merge adjacent file block reads in RocksDB MultiGet() and Add uncompressed block to cache (#6089)
Summary:
In the current MultiGet, if the KV-pairs do not belong to the data blocks in the block cache, multiple blocks are read from a SST. It will trigger one block read for each block request and read them in parallel. In some cases, if some data blocks are adjacent in the SST, the reads for these blocks can be combined to a single large read, which can reduce the system calls and reduce the read latency if possible.
Considering to fill the block cache, if multiple data blocks are in the same memory buffer, we need to copy them to the heap separately. Therefore, only in the case that 1) data block compression is enabled, and 2) compressed block cache is null, we can do combined read. Otherwise, extra memory copy is needed, which may cause extra overhead. In the current case, data blocks will be uncompressed to a new memory space.
Also, in the case that 1) data block compression is enabled, and 2) compressed block cache is null, it is possible the data block is actually not compressed. In the current logic, these data blocks will not be added to the uncompressed_cache. So if memory buffer is shared and the data block is not compressed, the data block are copied to the head and fill the cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6089
Test Plan: Added test case to ParallelIO.MultiGet. Pass make asan_check
Differential Revision: D18734668
Pulled By: zhichao-cao
fbshipit-source-id: 67c5615ed373e51e42635fd74b36f8f3a66d5da4
5 years ago
|
|
|
s = UncompressBlockContents(info, req.result.data() + req_offset,
|
|
|
|
handle.size(), &contents, footer.version(),
|
|
|
|
rep_->ioptions, memory_allocator);
|
|
|
|
} else {
|
|
|
|
// There are two cases here:
|
|
|
|
// 1) caller uses the shared buffer (scratch or direct io buffer);
|
|
|
|
// 2) we use the requst buffer.
|
|
|
|
// If scratch buffer or direct io buffer is used, we ensure that
|
Merge adjacent file block reads in RocksDB MultiGet() and Add uncompressed block to cache (#6089)
Summary:
In the current MultiGet, if the KV-pairs do not belong to the data blocks in the block cache, multiple blocks are read from a SST. It will trigger one block read for each block request and read them in parallel. In some cases, if some data blocks are adjacent in the SST, the reads for these blocks can be combined to a single large read, which can reduce the system calls and reduce the read latency if possible.
Considering to fill the block cache, if multiple data blocks are in the same memory buffer, we need to copy them to the heap separately. Therefore, only in the case that 1) data block compression is enabled, and 2) compressed block cache is null, we can do combined read. Otherwise, extra memory copy is needed, which may cause extra overhead. In the current case, data blocks will be uncompressed to a new memory space.
Also, in the case that 1) data block compression is enabled, and 2) compressed block cache is null, it is possible the data block is actually not compressed. In the current logic, these data blocks will not be added to the uncompressed_cache. So if memory buffer is shared and the data block is not compressed, the data block are copied to the head and fill the cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6089
Test Plan: Added test case to ParallelIO.MultiGet. Pass make asan_check
Differential Revision: D18734668
Pulled By: zhichao-cao
fbshipit-source-id: 67c5615ed373e51e42635fd74b36f8f3a66d5da4
5 years ago
|
|
|
// all raw blocks are copyed to the heap as single blocks. If scratch
|
|
|
|
// buffer is not used, we also have no combined read, so the raw
|
|
|
|
// block can be used directly.
|
|
|
|
contents = std::move(raw_block_contents);
|
|
|
|
}
|
|
|
|
if (s.ok()) {
|
|
|
|
(*results)[idx_in_batch].SetOwnedValue(new Block(
|
|
|
|
std::move(contents), read_amp_bytes_per_bit, ioptions.statistics));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
(*statuses)[idx_in_batch] = s;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
template <typename TBlocklike>
|
Move the index readers out of the block cache (#5298)
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
6 years ago
|
|
|
Status BlockBasedTable::RetrieveBlock(
|
|
|
|
FilePrefetchBuffer* prefetch_buffer, const ReadOptions& ro,
|
Move the index readers out of the block cache (#5298)
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
6 years ago
|
|
|
const BlockHandle& handle, const UncompressionDict& uncompression_dict,
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
CachableEntry<TBlocklike>* block_entry, BlockType block_type,
|
|
|
|
GetContext* get_context, BlockCacheLookupContext* lookup_context,
|
|
|
|
bool for_compaction, bool use_cache) const {
|
Move the index readers out of the block cache (#5298)
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
6 years ago
|
|
|
assert(block_entry);
|
|
|
|
assert(block_entry->IsEmpty());
|
|
|
|
|
|
|
|
Status s;
|
|
|
|
if (use_cache) {
|
|
|
|
s = MaybeReadBlockAndLoadToCache(prefetch_buffer, ro, handle,
|
|
|
|
uncompression_dict, block_entry,
|
|
|
|
block_type, get_context, lookup_context,
|
|
|
|
/*contents=*/nullptr);
|
Move the index readers out of the block cache (#5298)
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
6 years ago
|
|
|
|
|
|
|
if (!s.ok()) {
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (block_entry->GetValue() != nullptr) {
|
|
|
|
assert(s.ok());
|
Move the index readers out of the block cache (#5298)
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
6 years ago
|
|
|
return s;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
assert(block_entry->IsEmpty());
|
|
|
|
|
|
|
|
const bool no_io = ro.read_tier == kBlockCacheTier;
|
|
|
|
if (no_io) {
|
|
|
|
return Status::Incomplete("no blocking io");
|
|
|
|
}
|
|
|
|
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
const bool maybe_compressed =
|
|
|
|
block_type != BlockType::kFilter &&
|
|
|
|
block_type != BlockType::kCompressionDictionary &&
|
|
|
|
rep_->blocks_maybe_compressed;
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
const bool do_uncompress = maybe_compressed;
|
|
|
|
std::unique_ptr<TBlocklike> block;
|
Move the index readers out of the block cache (#5298)
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
6 years ago
|
|
|
|
|
|
|
{
|
|
|
|
StopWatch sw(rep_->ioptions.env, rep_->ioptions.statistics,
|
|
|
|
READ_BLOCK_GET_MICROS);
|
|
|
|
s = ReadBlockFromFile(
|
|
|
|
rep_->file.get(), prefetch_buffer, rep_->footer, ro, handle, &block,
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
rep_->ioptions, do_uncompress, maybe_compressed, block_type,
|
|
|
|
uncompression_dict, rep_->persistent_cache_options,
|
|
|
|
block_type == BlockType::kData
|
|
|
|
? rep_->table_options.read_amp_bytes_per_bit
|
|
|
|
: 0,
|
|
|
|
GetMemoryAllocator(rep_->table_options), for_compaction,
|
|
|
|
rep_->blocks_definitely_zstd_compressed,
|
|
|
|
rep_->table_options.filter_policy.get());
|
|
|
|
|
|
|
|
if (get_context) {
|
|
|
|
switch (block_type) {
|
|
|
|
case BlockType::kIndex:
|
|
|
|
++(get_context->get_context_stats_.num_index_read);
|
|
|
|
break;
|
|
|
|
case BlockType::kFilter:
|
|
|
|
++(get_context->get_context_stats_.num_filter_read);
|
|
|
|
break;
|
|
|
|
case BlockType::kData:
|
|
|
|
++(get_context->get_context_stats_.num_data_read);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
Move the index readers out of the block cache (#5298)
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
6 years ago
|
|
|
}
|
|
|
|
|
|
|
|
if (!s.ok()) {
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
block_entry->SetOwnedValue(block.release());
|
|
|
|
|
|
|
|
assert(s.ok());
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
// Explicitly instantiate templates for both "blocklike" types we use.
|
|
|
|
// This makes it possible to keep the template definitions in the .cc file.
|
|
|
|
template Status BlockBasedTable::RetrieveBlock<BlockContents>(
|
|
|
|
FilePrefetchBuffer* prefetch_buffer, const ReadOptions& ro,
|
|
|
|
const BlockHandle& handle, const UncompressionDict& uncompression_dict,
|
|
|
|
CachableEntry<BlockContents>* block_entry, BlockType block_type,
|
|
|
|
GetContext* get_context, BlockCacheLookupContext* lookup_context,
|
|
|
|
bool for_compaction, bool use_cache) const;
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
|
|
|
|
template Status BlockBasedTable::RetrieveBlock<ParsedFullFilterBlock>(
|
|
|
|
FilePrefetchBuffer* prefetch_buffer, const ReadOptions& ro,
|
|
|
|
const BlockHandle& handle, const UncompressionDict& uncompression_dict,
|
|
|
|
CachableEntry<ParsedFullFilterBlock>* block_entry, BlockType block_type,
|
|
|
|
GetContext* get_context, BlockCacheLookupContext* lookup_context,
|
|
|
|
bool for_compaction, bool use_cache) const;
|
|
|
|
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
template Status BlockBasedTable::RetrieveBlock<Block>(
|
|
|
|
FilePrefetchBuffer* prefetch_buffer, const ReadOptions& ro,
|
|
|
|
const BlockHandle& handle, const UncompressionDict& uncompression_dict,
|
|
|
|
CachableEntry<Block>* block_entry, BlockType block_type,
|
|
|
|
GetContext* get_context, BlockCacheLookupContext* lookup_context,
|
|
|
|
bool for_compaction, bool use_cache) const;
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
|
|
|
|
template Status BlockBasedTable::RetrieveBlock<UncompressionDict>(
|
|
|
|
FilePrefetchBuffer* prefetch_buffer, const ReadOptions& ro,
|
|
|
|
const BlockHandle& handle, const UncompressionDict& uncompression_dict,
|
|
|
|
CachableEntry<UncompressionDict>* block_entry, BlockType block_type,
|
|
|
|
GetContext* get_context, BlockCacheLookupContext* lookup_context,
|
|
|
|
bool for_compaction, bool use_cache) const;
|
|
|
|
|
|
|
|
BlockBasedTable::PartitionedIndexIteratorState::PartitionedIndexIteratorState(
|
|
|
|
const BlockBasedTable* table,
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
std::unordered_map<uint64_t, CachableEntry<Block>>* block_map)
|
|
|
|
: table_(table), block_map_(block_map) {}
|
|
|
|
|
|
|
|
InternalIteratorBase<IndexValue>*
|
|
|
|
BlockBasedTable::PartitionedIndexIteratorState::NewSecondaryIterator(
|
|
|
|
const BlockHandle& handle) {
|
|
|
|
// Return a block iterator on the index partition
|
|
|
|
auto block = block_map_->find(handle.offset());
|
|
|
|
// This is a possible scenario since block cache might not have had space
|
|
|
|
// for the partition
|
|
|
|
if (block != block_map_->end()) {
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
const Rep* rep = table_->get_rep();
|
|
|
|
assert(rep);
|
|
|
|
|
|
|
|
Statistics* kNullStats = nullptr;
|
Move the index readers out of the block cache (#5298)
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
6 years ago
|
|
|
// We don't return pinned data from index blocks, so no need
|
|
|
|
// to set `block_contents_pinned`.
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
return block->second.GetValue()->NewIndexIterator(
|
|
|
|
rep->internal_comparator.user_comparator(),
|
|
|
|
rep->get_global_seqno(BlockType::kIndex), nullptr, kNullStats, true,
|
|
|
|
rep->index_has_first_key, rep->index_key_includes_seq,
|
|
|
|
rep->index_value_is_full);
|
|
|
|
}
|
|
|
|
// Create an empty iterator
|
|
|
|
// TODO(ajkr): this is not the right way to handle an unpinned partition.
|
|
|
|
return new IndexBlockIter();
|
|
|
|
}
|
|
|
|
|
|
|
|
// This will be broken if the user specifies an unusual implementation
|
|
|
|
// of Options.comparator, or if the user specifies an unusual
|
|
|
|
// definition of prefixes in BlockBasedTableOptions.filter_policy.
|
|
|
|
// In particular, we require the following three properties:
|
|
|
|
//
|
|
|
|
// 1) key.starts_with(prefix(key))
|
|
|
|
// 2) Compare(prefix(key), key) <= 0.
|
|
|
|
// 3) If Compare(key1, key2) <= 0, then Compare(prefix(key1), prefix(key2)) <= 0
|
|
|
|
//
|
Fix iterator reading filter block despite read_tier == kBlockCacheTier (#6562)
Summary:
We're seeing iterators with `ReadOptions::read_tier == kBlockCacheTier` sometimes doing file reads. Stack trace:
```
rocksdb::RandomAccessFileReader::Read(unsigned long, unsigned long, rocksdb::Slice*, char*, bool) const
rocksdb::BlockFetcher::ReadBlockContents()
rocksdb::Status rocksdb::BlockBasedTable::MaybeReadBlockAndLoadToCache<rocksdb::ParsedFullFilterBlock>(rocksdb::FilePrefetchBuffer*, rocksdb::ReadOptions const&, rocksdb::BlockHandle const&, rocksdb::UncompressionDict const&, rocksdb::CachableEntry<rocksdb::ParsedFullFilterBlock>*, rocksdb::BlockType, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, rocksdb::BlockContents*) const
rocksdb::Status rocksdb::BlockBasedTable::RetrieveBlock<rocksdb::ParsedFullFilterBlock>(rocksdb::FilePrefetchBuffer*, rocksdb::ReadOptions const&, rocksdb::BlockHandle const&, rocksdb::UncompressionDict const&, rocksdb::CachableEntry<rocksdb::ParsedFullFilterBlock>*, rocksdb::BlockType, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, bool, bool) const
rocksdb::FilterBlockReaderCommon<rocksdb::ParsedFullFilterBlock>::ReadFilterBlock(rocksdb::BlockBasedTable const*, rocksdb::FilePrefetchBuffer*, rocksdb::ReadOptions const&, bool, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, rocksdb::CachableEntry<rocksdb::ParsedFullFilterBlock>*)
rocksdb::FilterBlockReaderCommon<rocksdb::ParsedFullFilterBlock>::GetOrReadFilterBlock(bool, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, rocksdb::CachableEntry<rocksdb::ParsedFullFilterBlock>*) const
rocksdb::FullFilterBlockReader::MayMatch(rocksdb::Slice const&, bool, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*) const
rocksdb::FullFilterBlockReader::RangeMayExist(rocksdb::Slice const*, rocksdb::Slice const&, rocksdb::SliceTransform const*, rocksdb::Comparator const*, rocksdb::Slice const*, bool*, bool, rocksdb::BlockCacheLookupContext*)
rocksdb::BlockBasedTable::PrefixMayMatch(rocksdb::Slice const&, rocksdb::ReadOptions const&, rocksdb::SliceTransform const*, bool, rocksdb::BlockCacheLookupContext*) const
rocksdb::BlockBasedTableIterator<rocksdb::DataBlockIter, rocksdb::Slice>::SeekImpl(rocksdb::Slice const*)
rocksdb::ForwardIterator::SeekInternal(rocksdb::Slice const&, bool)
rocksdb::DBIter::Seek(rocksdb::Slice const&)
```
`BlockBasedTableIterator::CheckPrefixMayMatch` was missing a check for `kBlockCacheTier`. This PR adds it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6562
Test Plan: deployed it to a logdevice test cluster and looked at logdevice's IO tracing.
Reviewed By: siying
Differential Revision: D20529368
Pulled By: al13n321
fbshipit-source-id: 65bf33964b1951464415c900336635fb20919611
5 years ago
|
|
|
// If read_options.read_tier == kBlockCacheTier, this method will do no I/O and
|
|
|
|
// will return true if the filter block is not in memory and not found in block
|
|
|
|
// cache.
|
|
|
|
//
|
|
|
|
// REQUIRES: this method shouldn't be called while the DB lock is held.
|
|
|
|
bool BlockBasedTable::PrefixMayMatch(
|
|
|
|
const Slice& internal_key, const ReadOptions& read_options,
|
|
|
|
const SliceTransform* options_prefix_extractor,
|
|
|
|
const bool need_upper_bound_check,
|
|
|
|
BlockCacheLookupContext* lookup_context) const {
|
|
|
|
if (!rep_->filter_policy) {
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
const SliceTransform* prefix_extractor;
|
|
|
|
|
|
|
|
if (rep_->table_prefix_extractor == nullptr) {
|
|
|
|
if (need_upper_bound_check) {
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
prefix_extractor = options_prefix_extractor;
|
|
|
|
} else {
|
|
|
|
prefix_extractor = rep_->table_prefix_extractor.get();
|
|
|
|
}
|
|
|
|
auto ts_sz = rep_->internal_comparator.user_comparator()->timestamp_size();
|
|
|
|
auto user_key_without_ts =
|
|
|
|
ExtractUserKeyAndStripTimestamp(internal_key, ts_sz);
|
|
|
|
if (!prefix_extractor->InDomain(user_key_without_ts)) {
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool may_match = true;
|
|
|
|
|
|
|
|
// First, try check with full filter
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
FilterBlockReader* const filter = rep_->filter.get();
|
|
|
|
bool filter_checked = true;
|
|
|
|
if (filter != nullptr) {
|
Fix iterator reading filter block despite read_tier == kBlockCacheTier (#6562)
Summary:
We're seeing iterators with `ReadOptions::read_tier == kBlockCacheTier` sometimes doing file reads. Stack trace:
```
rocksdb::RandomAccessFileReader::Read(unsigned long, unsigned long, rocksdb::Slice*, char*, bool) const
rocksdb::BlockFetcher::ReadBlockContents()
rocksdb::Status rocksdb::BlockBasedTable::MaybeReadBlockAndLoadToCache<rocksdb::ParsedFullFilterBlock>(rocksdb::FilePrefetchBuffer*, rocksdb::ReadOptions const&, rocksdb::BlockHandle const&, rocksdb::UncompressionDict const&, rocksdb::CachableEntry<rocksdb::ParsedFullFilterBlock>*, rocksdb::BlockType, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, rocksdb::BlockContents*) const
rocksdb::Status rocksdb::BlockBasedTable::RetrieveBlock<rocksdb::ParsedFullFilterBlock>(rocksdb::FilePrefetchBuffer*, rocksdb::ReadOptions const&, rocksdb::BlockHandle const&, rocksdb::UncompressionDict const&, rocksdb::CachableEntry<rocksdb::ParsedFullFilterBlock>*, rocksdb::BlockType, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, bool, bool) const
rocksdb::FilterBlockReaderCommon<rocksdb::ParsedFullFilterBlock>::ReadFilterBlock(rocksdb::BlockBasedTable const*, rocksdb::FilePrefetchBuffer*, rocksdb::ReadOptions const&, bool, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, rocksdb::CachableEntry<rocksdb::ParsedFullFilterBlock>*)
rocksdb::FilterBlockReaderCommon<rocksdb::ParsedFullFilterBlock>::GetOrReadFilterBlock(bool, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, rocksdb::CachableEntry<rocksdb::ParsedFullFilterBlock>*) const
rocksdb::FullFilterBlockReader::MayMatch(rocksdb::Slice const&, bool, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*) const
rocksdb::FullFilterBlockReader::RangeMayExist(rocksdb::Slice const*, rocksdb::Slice const&, rocksdb::SliceTransform const*, rocksdb::Comparator const*, rocksdb::Slice const*, bool*, bool, rocksdb::BlockCacheLookupContext*)
rocksdb::BlockBasedTable::PrefixMayMatch(rocksdb::Slice const&, rocksdb::ReadOptions const&, rocksdb::SliceTransform const*, bool, rocksdb::BlockCacheLookupContext*) const
rocksdb::BlockBasedTableIterator<rocksdb::DataBlockIter, rocksdb::Slice>::SeekImpl(rocksdb::Slice const*)
rocksdb::ForwardIterator::SeekInternal(rocksdb::Slice const&, bool)
rocksdb::DBIter::Seek(rocksdb::Slice const&)
```
`BlockBasedTableIterator::CheckPrefixMayMatch` was missing a check for `kBlockCacheTier`. This PR adds it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6562
Test Plan: deployed it to a logdevice test cluster and looked at logdevice's IO tracing.
Reviewed By: siying
Differential Revision: D20529368
Pulled By: al13n321
fbshipit-source-id: 65bf33964b1951464415c900336635fb20919611
5 years ago
|
|
|
const bool no_io = read_options.read_tier == kBlockCacheTier;
|
|
|
|
|
|
|
|
if (!filter->IsBlockBased()) {
|
|
|
|
const Slice* const const_ikey_ptr = &internal_key;
|
|
|
|
may_match = filter->RangeMayExist(
|
|
|
|
read_options.iterate_upper_bound, user_key_without_ts,
|
|
|
|
prefix_extractor, rep_->internal_comparator.user_comparator(),
|
|
|
|
const_ikey_ptr, &filter_checked, need_upper_bound_check, no_io,
|
|
|
|
lookup_context);
|
|
|
|
} else {
|
|
|
|
// if prefix_extractor changed for block based filter, skip filter
|
|
|
|
if (need_upper_bound_check) {
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
auto prefix = prefix_extractor->Transform(user_key_without_ts);
|
|
|
|
InternalKey internal_key_prefix(prefix, kMaxSequenceNumber, kTypeValue);
|
|
|
|
auto internal_prefix = internal_key_prefix.Encode();
|
|
|
|
|
|
|
|
// To prevent any io operation in this method, we set `read_tier` to make
|
|
|
|
// sure we always read index or filter only when they have already been
|
|
|
|
// loaded to memory.
|
|
|
|
ReadOptions no_io_read_options;
|
|
|
|
no_io_read_options.read_tier = kBlockCacheTier;
|
|
|
|
|
|
|
|
// Then, try find it within each block
|
|
|
|
// we already know prefix_extractor and prefix_extractor_name must match
|
|
|
|
// because `CheckPrefixMayMatch` first checks `check_filter_ == true`
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
std::unique_ptr<InternalIteratorBase<IndexValue>> iiter(NewIndexIterator(
|
|
|
|
no_io_read_options,
|
|
|
|
/*need_upper_bound_check=*/false, /*input_iter=*/nullptr,
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
/*get_context=*/nullptr, lookup_context));
|
|
|
|
iiter->Seek(internal_prefix);
|
|
|
|
|
|
|
|
if (!iiter->Valid()) {
|
|
|
|
// we're past end of file
|
|
|
|
// if it's incomplete, it means that we avoided I/O
|
|
|
|
// and we're not really sure that we're past the end
|
|
|
|
// of the file
|
|
|
|
may_match = iiter->status().IsIncomplete();
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
} else if ((rep_->index_key_includes_seq ? ExtractUserKey(iiter->key())
|
|
|
|
: iiter->key())
|
|
|
|
.starts_with(ExtractUserKey(internal_prefix))) {
|
|
|
|
// we need to check for this subtle case because our only
|
|
|
|
// guarantee is that "the key is a string >= last key in that data
|
|
|
|
// block" according to the doc/table_format.txt spec.
|
|
|
|
//
|
|
|
|
// Suppose iiter->key() starts with the desired prefix; it is not
|
|
|
|
// necessarily the case that the corresponding data block will
|
|
|
|
// contain the prefix, since iiter->key() need not be in the
|
|
|
|
// block. However, the next data block may contain the prefix, so
|
|
|
|
// we return true to play it safe.
|
|
|
|
may_match = true;
|
|
|
|
} else if (filter->IsBlockBased()) {
|
|
|
|
// iiter->key() does NOT start with the desired prefix. Because
|
|
|
|
// Seek() finds the first key that is >= the seek target, this
|
|
|
|
// means that iiter->key() > prefix. Thus, any data blocks coming
|
|
|
|
// after the data block corresponding to iiter->key() cannot
|
|
|
|
// possibly contain the key. Thus, the corresponding data block
|
|
|
|
// is the only on could potentially contain the prefix.
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
BlockHandle handle = iiter->value().handle;
|
|
|
|
may_match = filter->PrefixMayMatch(
|
Fix iterator reading filter block despite read_tier == kBlockCacheTier (#6562)
Summary:
We're seeing iterators with `ReadOptions::read_tier == kBlockCacheTier` sometimes doing file reads. Stack trace:
```
rocksdb::RandomAccessFileReader::Read(unsigned long, unsigned long, rocksdb::Slice*, char*, bool) const
rocksdb::BlockFetcher::ReadBlockContents()
rocksdb::Status rocksdb::BlockBasedTable::MaybeReadBlockAndLoadToCache<rocksdb::ParsedFullFilterBlock>(rocksdb::FilePrefetchBuffer*, rocksdb::ReadOptions const&, rocksdb::BlockHandle const&, rocksdb::UncompressionDict const&, rocksdb::CachableEntry<rocksdb::ParsedFullFilterBlock>*, rocksdb::BlockType, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, rocksdb::BlockContents*) const
rocksdb::Status rocksdb::BlockBasedTable::RetrieveBlock<rocksdb::ParsedFullFilterBlock>(rocksdb::FilePrefetchBuffer*, rocksdb::ReadOptions const&, rocksdb::BlockHandle const&, rocksdb::UncompressionDict const&, rocksdb::CachableEntry<rocksdb::ParsedFullFilterBlock>*, rocksdb::BlockType, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, bool, bool) const
rocksdb::FilterBlockReaderCommon<rocksdb::ParsedFullFilterBlock>::ReadFilterBlock(rocksdb::BlockBasedTable const*, rocksdb::FilePrefetchBuffer*, rocksdb::ReadOptions const&, bool, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, rocksdb::CachableEntry<rocksdb::ParsedFullFilterBlock>*)
rocksdb::FilterBlockReaderCommon<rocksdb::ParsedFullFilterBlock>::GetOrReadFilterBlock(bool, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*, rocksdb::CachableEntry<rocksdb::ParsedFullFilterBlock>*) const
rocksdb::FullFilterBlockReader::MayMatch(rocksdb::Slice const&, bool, rocksdb::GetContext*, rocksdb::BlockCacheLookupContext*) const
rocksdb::FullFilterBlockReader::RangeMayExist(rocksdb::Slice const*, rocksdb::Slice const&, rocksdb::SliceTransform const*, rocksdb::Comparator const*, rocksdb::Slice const*, bool*, bool, rocksdb::BlockCacheLookupContext*)
rocksdb::BlockBasedTable::PrefixMayMatch(rocksdb::Slice const&, rocksdb::ReadOptions const&, rocksdb::SliceTransform const*, bool, rocksdb::BlockCacheLookupContext*) const
rocksdb::BlockBasedTableIterator<rocksdb::DataBlockIter, rocksdb::Slice>::SeekImpl(rocksdb::Slice const*)
rocksdb::ForwardIterator::SeekInternal(rocksdb::Slice const&, bool)
rocksdb::DBIter::Seek(rocksdb::Slice const&)
```
`BlockBasedTableIterator::CheckPrefixMayMatch` was missing a check for `kBlockCacheTier`. This PR adds it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6562
Test Plan: deployed it to a logdevice test cluster and looked at logdevice's IO tracing.
Reviewed By: siying
Differential Revision: D20529368
Pulled By: al13n321
fbshipit-source-id: 65bf33964b1951464415c900336635fb20919611
5 years ago
|
|
|
prefix, prefix_extractor, handle.offset(), no_io,
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
/*const_key_ptr=*/nullptr, /*get_context=*/nullptr, lookup_context);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (filter_checked) {
|
|
|
|
Statistics* statistics = rep_->ioptions.statistics;
|
|
|
|
RecordTick(statistics, BLOOM_FILTER_PREFIX_CHECKED);
|
|
|
|
if (!may_match) {
|
|
|
|
RecordTick(statistics, BLOOM_FILTER_PREFIX_USEFUL);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return may_match;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
InternalIterator* BlockBasedTable::NewIterator(
|
|
|
|
const ReadOptions& read_options, const SliceTransform* prefix_extractor,
|
|
|
|
Arena* arena, bool skip_filters, TableReaderCaller caller,
|
Properly report IO errors when IndexType::kBinarySearchWithFirstKey is used (#6621)
Summary:
Context: Index type `kBinarySearchWithFirstKey` added the ability for sst file iterator to sometimes report a key from index without reading the corresponding data block. This is useful when sst blocks are cut at some meaningful boundaries (e.g. one block per key prefix), and many seeks land between blocks (e.g. for each prefix, the ranges of keys in different sst files are nearly disjoint, so a typical seek needs to read a data block from only one file even if all files have the prefix). But this added a new error condition, which rocksdb code was really not equipped to deal with: `InternalIterator::value()` may fail with an IO error or Status::Incomplete, but it's just a method returning a Slice, with no way to report error instead. Before this PR, this type of error wasn't handled at all (an empty slice was returned), and kBinarySearchWithFirstKey implementation was considered a prototype.
Now that we (LogDevice) have experimented with kBinarySearchWithFirstKey for a while and confirmed that it's really useful, this PR is adding the missing error handling.
It's a pretty inconvenient situation implementation-wise. The error needs to be reported from InternalIterator when trying to access value. But there are ~700 call sites of `InternalIterator::value()`, most of which either can't hit the error condition (because the iterator is reading from memtable or from index or something) or wouldn't benefit from the deferred loading of the value (e.g. compaction iterator that reads all values anyway). Adding error handling to all these call sites would needlessly bloat the code. So instead I made the deferred value loading optional: only the call sites that may use deferred loading have to call the new method `PrepareValue()` before calling `value()`. The feature is enabled with a new bool argument `allow_unprepared_value` to a bunch of methods that create iterators (it wouldn't make sense to put it in ReadOptions because it's completely internal to iterators, with virtually no user-visible effect). Lmk if you have better ideas.
Note that the deferred value loading only happens for *internal* iterators. The user-visible iterator (DBIter) always prepares the value before returning from Seek/Next/etc. We could go further and add an API to defer that value loading too, but that's most likely not useful for LogDevice, so it doesn't seem worth the complexity for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6621
Test Plan: make -j5 check . Will also deploy to some logdevice test clusters and look at stats.
Reviewed By: siying
Differential Revision: D20786930
Pulled By: al13n321
fbshipit-source-id: 6da77d918bad3780522e918f17f4d5513d3e99ee
5 years ago
|
|
|
size_t compaction_readahead_size, bool allow_unprepared_value) {
|
|
|
|
BlockCacheLookupContext lookup_context{caller};
|
|
|
|
bool need_upper_bound_check =
|
|
|
|
read_options.auto_prefix_mode ||
|
|
|
|
PrefixExtractorChanged(rep_->table_properties.get(), prefix_extractor);
|
De-template block based table iterator (#6531)
Summary:
Right now block based table iterator is used as both of iterating data for block based table, and for the index iterator for partitioend index. This was initially convenient for introducing a new iterator and block type for new index format, while reducing code change. However, these two usage doesn't go with each other very well. For example, Prev() is never called for partitioned index iterator, and some other complexity is maintained in block based iterators, which is not needed for index iterator but maintainers will always need to reason about it. Furthermore, the template usage is not following Google C++ Style which we are following, and makes a large chunk of code tangled together. This commit separate the two iterators. Right now, here is what it is done:
1. Copy the block based iterator code into partitioned index iterator, and de-template them.
2. Remove some code not needed for partitioned index. The upper bound check and tricks are removed. We never tested performance for those tricks when partitioned index is enabled in the first place. It's unlikelyl to generate performance regression, as creating new partitioned index block is much rarer than data blocks.
3. Separate out the prefetch logic to a helper class and both classes call them.
This commit will enable future follow-ups. One direction is that we might separate index iterator interface for data blocks and index blocks, as they are quite different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6531
Test Plan: build using make and cmake. And build release
Differential Revision: D20473108
fbshipit-source-id: e48011783b339a4257c204cc07507b171b834b0f
5 years ago
|
|
|
std::unique_ptr<InternalIteratorBase<IndexValue>> index_iter(NewIndexIterator(
|
|
|
|
read_options,
|
|
|
|
need_upper_bound_check &&
|
|
|
|
rep_->index_type == BlockBasedTableOptions::kHashSearch,
|
|
|
|
/*input_iter=*/nullptr, /*get_context=*/nullptr, &lookup_context));
|
|
|
|
if (arena == nullptr) {
|
De-template block based table iterator (#6531)
Summary:
Right now block based table iterator is used as both of iterating data for block based table, and for the index iterator for partitioend index. This was initially convenient for introducing a new iterator and block type for new index format, while reducing code change. However, these two usage doesn't go with each other very well. For example, Prev() is never called for partitioned index iterator, and some other complexity is maintained in block based iterators, which is not needed for index iterator but maintainers will always need to reason about it. Furthermore, the template usage is not following Google C++ Style which we are following, and makes a large chunk of code tangled together. This commit separate the two iterators. Right now, here is what it is done:
1. Copy the block based iterator code into partitioned index iterator, and de-template them.
2. Remove some code not needed for partitioned index. The upper bound check and tricks are removed. We never tested performance for those tricks when partitioned index is enabled in the first place. It's unlikelyl to generate performance regression, as creating new partitioned index block is much rarer than data blocks.
3. Separate out the prefetch logic to a helper class and both classes call them.
This commit will enable future follow-ups. One direction is that we might separate index iterator interface for data blocks and index blocks, as they are quite different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6531
Test Plan: build using make and cmake. And build release
Differential Revision: D20473108
fbshipit-source-id: e48011783b339a4257c204cc07507b171b834b0f
5 years ago
|
|
|
return new BlockBasedTableIterator(
|
|
|
|
this, read_options, rep_->internal_comparator, std::move(index_iter),
|
|
|
|
!skip_filters && !read_options.total_order_seek &&
|
|
|
|
prefix_extractor != nullptr,
|
De-template block based table iterator (#6531)
Summary:
Right now block based table iterator is used as both of iterating data for block based table, and for the index iterator for partitioend index. This was initially convenient for introducing a new iterator and block type for new index format, while reducing code change. However, these two usage doesn't go with each other very well. For example, Prev() is never called for partitioned index iterator, and some other complexity is maintained in block based iterators, which is not needed for index iterator but maintainers will always need to reason about it. Furthermore, the template usage is not following Google C++ Style which we are following, and makes a large chunk of code tangled together. This commit separate the two iterators. Right now, here is what it is done:
1. Copy the block based iterator code into partitioned index iterator, and de-template them.
2. Remove some code not needed for partitioned index. The upper bound check and tricks are removed. We never tested performance for those tricks when partitioned index is enabled in the first place. It's unlikelyl to generate performance regression, as creating new partitioned index block is much rarer than data blocks.
3. Separate out the prefetch logic to a helper class and both classes call them.
This commit will enable future follow-ups. One direction is that we might separate index iterator interface for data blocks and index blocks, as they are quite different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6531
Test Plan: build using make and cmake. And build release
Differential Revision: D20473108
fbshipit-source-id: e48011783b339a4257c204cc07507b171b834b0f
5 years ago
|
|
|
need_upper_bound_check, prefix_extractor, caller,
|
Properly report IO errors when IndexType::kBinarySearchWithFirstKey is used (#6621)
Summary:
Context: Index type `kBinarySearchWithFirstKey` added the ability for sst file iterator to sometimes report a key from index without reading the corresponding data block. This is useful when sst blocks are cut at some meaningful boundaries (e.g. one block per key prefix), and many seeks land between blocks (e.g. for each prefix, the ranges of keys in different sst files are nearly disjoint, so a typical seek needs to read a data block from only one file even if all files have the prefix). But this added a new error condition, which rocksdb code was really not equipped to deal with: `InternalIterator::value()` may fail with an IO error or Status::Incomplete, but it's just a method returning a Slice, with no way to report error instead. Before this PR, this type of error wasn't handled at all (an empty slice was returned), and kBinarySearchWithFirstKey implementation was considered a prototype.
Now that we (LogDevice) have experimented with kBinarySearchWithFirstKey for a while and confirmed that it's really useful, this PR is adding the missing error handling.
It's a pretty inconvenient situation implementation-wise. The error needs to be reported from InternalIterator when trying to access value. But there are ~700 call sites of `InternalIterator::value()`, most of which either can't hit the error condition (because the iterator is reading from memtable or from index or something) or wouldn't benefit from the deferred loading of the value (e.g. compaction iterator that reads all values anyway). Adding error handling to all these call sites would needlessly bloat the code. So instead I made the deferred value loading optional: only the call sites that may use deferred loading have to call the new method `PrepareValue()` before calling `value()`. The feature is enabled with a new bool argument `allow_unprepared_value` to a bunch of methods that create iterators (it wouldn't make sense to put it in ReadOptions because it's completely internal to iterators, with virtually no user-visible effect). Lmk if you have better ideas.
Note that the deferred value loading only happens for *internal* iterators. The user-visible iterator (DBIter) always prepares the value before returning from Seek/Next/etc. We could go further and add an API to defer that value loading too, but that's most likely not useful for LogDevice, so it doesn't seem worth the complexity for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6621
Test Plan: make -j5 check . Will also deploy to some logdevice test clusters and look at stats.
Reviewed By: siying
Differential Revision: D20786930
Pulled By: al13n321
fbshipit-source-id: 6da77d918bad3780522e918f17f4d5513d3e99ee
5 years ago
|
|
|
compaction_readahead_size, allow_unprepared_value);
|
|
|
|
} else {
|
De-template block based table iterator (#6531)
Summary:
Right now block based table iterator is used as both of iterating data for block based table, and for the index iterator for partitioend index. This was initially convenient for introducing a new iterator and block type for new index format, while reducing code change. However, these two usage doesn't go with each other very well. For example, Prev() is never called for partitioned index iterator, and some other complexity is maintained in block based iterators, which is not needed for index iterator but maintainers will always need to reason about it. Furthermore, the template usage is not following Google C++ Style which we are following, and makes a large chunk of code tangled together. This commit separate the two iterators. Right now, here is what it is done:
1. Copy the block based iterator code into partitioned index iterator, and de-template them.
2. Remove some code not needed for partitioned index. The upper bound check and tricks are removed. We never tested performance for those tricks when partitioned index is enabled in the first place. It's unlikelyl to generate performance regression, as creating new partitioned index block is much rarer than data blocks.
3. Separate out the prefetch logic to a helper class and both classes call them.
This commit will enable future follow-ups. One direction is that we might separate index iterator interface for data blocks and index blocks, as they are quite different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6531
Test Plan: build using make and cmake. And build release
Differential Revision: D20473108
fbshipit-source-id: e48011783b339a4257c204cc07507b171b834b0f
5 years ago
|
|
|
auto* mem = arena->AllocateAligned(sizeof(BlockBasedTableIterator));
|
|
|
|
return new (mem) BlockBasedTableIterator(
|
|
|
|
this, read_options, rep_->internal_comparator, std::move(index_iter),
|
|
|
|
!skip_filters && !read_options.total_order_seek &&
|
|
|
|
prefix_extractor != nullptr,
|
De-template block based table iterator (#6531)
Summary:
Right now block based table iterator is used as both of iterating data for block based table, and for the index iterator for partitioend index. This was initially convenient for introducing a new iterator and block type for new index format, while reducing code change. However, these two usage doesn't go with each other very well. For example, Prev() is never called for partitioned index iterator, and some other complexity is maintained in block based iterators, which is not needed for index iterator but maintainers will always need to reason about it. Furthermore, the template usage is not following Google C++ Style which we are following, and makes a large chunk of code tangled together. This commit separate the two iterators. Right now, here is what it is done:
1. Copy the block based iterator code into partitioned index iterator, and de-template them.
2. Remove some code not needed for partitioned index. The upper bound check and tricks are removed. We never tested performance for those tricks when partitioned index is enabled in the first place. It's unlikelyl to generate performance regression, as creating new partitioned index block is much rarer than data blocks.
3. Separate out the prefetch logic to a helper class and both classes call them.
This commit will enable future follow-ups. One direction is that we might separate index iterator interface for data blocks and index blocks, as they are quite different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6531
Test Plan: build using make and cmake. And build release
Differential Revision: D20473108
fbshipit-source-id: e48011783b339a4257c204cc07507b171b834b0f
5 years ago
|
|
|
need_upper_bound_check, prefix_extractor, caller,
|
Properly report IO errors when IndexType::kBinarySearchWithFirstKey is used (#6621)
Summary:
Context: Index type `kBinarySearchWithFirstKey` added the ability for sst file iterator to sometimes report a key from index without reading the corresponding data block. This is useful when sst blocks are cut at some meaningful boundaries (e.g. one block per key prefix), and many seeks land between blocks (e.g. for each prefix, the ranges of keys in different sst files are nearly disjoint, so a typical seek needs to read a data block from only one file even if all files have the prefix). But this added a new error condition, which rocksdb code was really not equipped to deal with: `InternalIterator::value()` may fail with an IO error or Status::Incomplete, but it's just a method returning a Slice, with no way to report error instead. Before this PR, this type of error wasn't handled at all (an empty slice was returned), and kBinarySearchWithFirstKey implementation was considered a prototype.
Now that we (LogDevice) have experimented with kBinarySearchWithFirstKey for a while and confirmed that it's really useful, this PR is adding the missing error handling.
It's a pretty inconvenient situation implementation-wise. The error needs to be reported from InternalIterator when trying to access value. But there are ~700 call sites of `InternalIterator::value()`, most of which either can't hit the error condition (because the iterator is reading from memtable or from index or something) or wouldn't benefit from the deferred loading of the value (e.g. compaction iterator that reads all values anyway). Adding error handling to all these call sites would needlessly bloat the code. So instead I made the deferred value loading optional: only the call sites that may use deferred loading have to call the new method `PrepareValue()` before calling `value()`. The feature is enabled with a new bool argument `allow_unprepared_value` to a bunch of methods that create iterators (it wouldn't make sense to put it in ReadOptions because it's completely internal to iterators, with virtually no user-visible effect). Lmk if you have better ideas.
Note that the deferred value loading only happens for *internal* iterators. The user-visible iterator (DBIter) always prepares the value before returning from Seek/Next/etc. We could go further and add an API to defer that value loading too, but that's most likely not useful for LogDevice, so it doesn't seem worth the complexity for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6621
Test Plan: make -j5 check . Will also deploy to some logdevice test clusters and look at stats.
Reviewed By: siying
Differential Revision: D20786930
Pulled By: al13n321
fbshipit-source-id: 6da77d918bad3780522e918f17f4d5513d3e99ee
5 years ago
|
|
|
compaction_readahead_size, allow_unprepared_value);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
FragmentedRangeTombstoneIterator* BlockBasedTable::NewRangeTombstoneIterator(
|
|
|
|
const ReadOptions& read_options) {
|
Cache fragmented range tombstones in BlockBasedTableReader (#4493)
Summary:
This allows tombstone fragmenting to only be performed when the table is opened, and cached for subsequent accesses.
On the same DB used in #4449, running `readrandom` results in the following:
```
readrandom : 0.983 micros/op 1017076 ops/sec; 78.3 MB/s (63103 of 100000 found)
```
Now that Get performance in the presence of range tombstones is reasonable, I also compared the performance between a DB with range tombstones, "expanded" range tombstones (several point tombstones that cover the same keys the equivalent range tombstone would cover, a common workaround for DeleteRange), and no range tombstones. The created DBs had 5 million keys each, and DeleteRange was called at regular intervals (depending on the total number of range tombstones being written) after 4.5 million Puts. The table below summarizes the results of a `readwhilewriting` benchmark (in order to provide somewhat more realistic results):
```
Tombstones? | avg micros/op | stddev micros/op | avg ops/s | stddev ops/s
----------------- | ------------- | ---------------- | ------------ | ------------
None | 0.6186 | 0.04637 | 1,625,252.90 | 124,679.41
500 Expanded | 0.6019 | 0.03628 | 1,666,670.40 | 101,142.65
500 Unexpanded | 0.6435 | 0.03994 | 1,559,979.40 | 104,090.52
1k Expanded | 0.6034 | 0.04349 | 1,665,128.10 | 125,144.57
1k Unexpanded | 0.6261 | 0.03093 | 1,600,457.50 | 79,024.94
5k Expanded | 0.6163 | 0.05926 | 1,636,668.80 | 154,888.85
5k Unexpanded | 0.6402 | 0.04002 | 1,567,804.70 | 100,965.55
10k Expanded | 0.6036 | 0.05105 | 1,667,237.70 | 142,830.36
10k Unexpanded | 0.6128 | 0.02598 | 1,634,633.40 | 72,161.82
25k Expanded | 0.6198 | 0.04542 | 1,620,980.50 | 116,662.93
25k Unexpanded | 0.5478 | 0.0362 | 1,833,059.10 | 121,233.81
50k Expanded | 0.5104 | 0.04347 | 1,973,107.90 | 184,073.49
50k Unexpanded | 0.4528 | 0.03387 | 2,219,034.50 | 170,984.32
```
After a large enough quantity of range tombstones are written, range tombstone Gets can become faster than reading from an equivalent DB with several point tombstones.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4493
Differential Revision: D10842844
Pulled By: abhimadan
fbshipit-source-id: a7d44534f8120e6aabb65779d26c6b9df954c509
6 years ago
|
|
|
if (rep_->fragmented_range_dels == nullptr) {
|
|
|
|
return nullptr;
|
|
|
|
}
|
|
|
|
SequenceNumber snapshot = kMaxSequenceNumber;
|
|
|
|
if (read_options.snapshot != nullptr) {
|
|
|
|
snapshot = read_options.snapshot->GetSequenceNumber();
|
|
|
|
}
|
|
|
|
return new FragmentedRangeTombstoneIterator(
|
|
|
|
rep_->fragmented_range_dels, rep_->internal_comparator, snapshot);
|
Cache fragmented range tombstones in BlockBasedTableReader (#4493)
Summary:
This allows tombstone fragmenting to only be performed when the table is opened, and cached for subsequent accesses.
On the same DB used in #4449, running `readrandom` results in the following:
```
readrandom : 0.983 micros/op 1017076 ops/sec; 78.3 MB/s (63103 of 100000 found)
```
Now that Get performance in the presence of range tombstones is reasonable, I also compared the performance between a DB with range tombstones, "expanded" range tombstones (several point tombstones that cover the same keys the equivalent range tombstone would cover, a common workaround for DeleteRange), and no range tombstones. The created DBs had 5 million keys each, and DeleteRange was called at regular intervals (depending on the total number of range tombstones being written) after 4.5 million Puts. The table below summarizes the results of a `readwhilewriting` benchmark (in order to provide somewhat more realistic results):
```
Tombstones? | avg micros/op | stddev micros/op | avg ops/s | stddev ops/s
----------------- | ------------- | ---------------- | ------------ | ------------
None | 0.6186 | 0.04637 | 1,625,252.90 | 124,679.41
500 Expanded | 0.6019 | 0.03628 | 1,666,670.40 | 101,142.65
500 Unexpanded | 0.6435 | 0.03994 | 1,559,979.40 | 104,090.52
1k Expanded | 0.6034 | 0.04349 | 1,665,128.10 | 125,144.57
1k Unexpanded | 0.6261 | 0.03093 | 1,600,457.50 | 79,024.94
5k Expanded | 0.6163 | 0.05926 | 1,636,668.80 | 154,888.85
5k Unexpanded | 0.6402 | 0.04002 | 1,567,804.70 | 100,965.55
10k Expanded | 0.6036 | 0.05105 | 1,667,237.70 | 142,830.36
10k Unexpanded | 0.6128 | 0.02598 | 1,634,633.40 | 72,161.82
25k Expanded | 0.6198 | 0.04542 | 1,620,980.50 | 116,662.93
25k Unexpanded | 0.5478 | 0.0362 | 1,833,059.10 | 121,233.81
50k Expanded | 0.5104 | 0.04347 | 1,973,107.90 | 184,073.49
50k Unexpanded | 0.4528 | 0.03387 | 2,219,034.50 | 170,984.32
```
After a large enough quantity of range tombstones are written, range tombstone Gets can become faster than reading from an equivalent DB with several point tombstones.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4493
Differential Revision: D10842844
Pulled By: abhimadan
fbshipit-source-id: a7d44534f8120e6aabb65779d26c6b9df954c509
6 years ago
|
|
|
}
|
|
|
|
|
|
|
|
bool BlockBasedTable::FullFilterKeyMayMatch(
|
|
|
|
const ReadOptions& read_options, FilterBlockReader* filter,
|
|
|
|
const Slice& internal_key, const bool no_io,
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
const SliceTransform* prefix_extractor, GetContext* get_context,
|
|
|
|
BlockCacheLookupContext* lookup_context) const {
|
|
|
|
if (filter == nullptr || filter->IsBlockBased()) {
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
Slice user_key = ExtractUserKey(internal_key);
|
|
|
|
const Slice* const const_ikey_ptr = &internal_key;
|
|
|
|
bool may_match = true;
|
|
|
|
size_t ts_sz = rep_->internal_comparator.user_comparator()->timestamp_size();
|
|
|
|
Slice user_key_without_ts = StripTimestampFromUserKey(user_key, ts_sz);
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
if (rep_->whole_key_filtering) {
|
|
|
|
may_match =
|
|
|
|
filter->KeyMayMatch(user_key_without_ts, prefix_extractor, kNotValid,
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
no_io, const_ikey_ptr, get_context, lookup_context);
|
|
|
|
} else if (!read_options.total_order_seek && prefix_extractor &&
|
|
|
|
rep_->table_properties->prefix_extractor_name.compare(
|
|
|
|
prefix_extractor->Name()) == 0 &&
|
|
|
|
prefix_extractor->InDomain(user_key_without_ts) &&
|
|
|
|
!filter->PrefixMayMatch(
|
|
|
|
prefix_extractor->Transform(user_key_without_ts),
|
|
|
|
prefix_extractor, kNotValid, no_io, const_ikey_ptr,
|
|
|
|
get_context, lookup_context)) {
|
|
|
|
may_match = false;
|
|
|
|
}
|
|
|
|
if (may_match) {
|
|
|
|
RecordTick(rep_->ioptions.statistics, BLOOM_FILTER_FULL_POSITIVE);
|
|
|
|
PERF_COUNTER_BY_LEVEL_ADD(bloom_filter_full_positive, 1, rep_->level);
|
|
|
|
}
|
|
|
|
return may_match;
|
|
|
|
}
|
|
|
|
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
6 years ago
|
|
|
void BlockBasedTable::FullFilterKeysMayMatch(
|
|
|
|
const ReadOptions& read_options, FilterBlockReader* filter,
|
|
|
|
MultiGetRange* range, const bool no_io,
|
|
|
|
const SliceTransform* prefix_extractor,
|
|
|
|
BlockCacheLookupContext* lookup_context) const {
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
6 years ago
|
|
|
if (filter == nullptr || filter->IsBlockBased()) {
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
uint64_t before_keys = range->KeysLeft();
|
|
|
|
assert(before_keys > 0); // Caller should ensure
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
if (rep_->whole_key_filtering) {
|
|
|
|
filter->KeysMayMatch(range, prefix_extractor, kNotValid, no_io,
|
|
|
|
lookup_context);
|
|
|
|
uint64_t after_keys = range->KeysLeft();
|
|
|
|
if (after_keys) {
|
|
|
|
RecordTick(rep_->ioptions.statistics, BLOOM_FILTER_FULL_POSITIVE,
|
|
|
|
after_keys);
|
|
|
|
PERF_COUNTER_BY_LEVEL_ADD(bloom_filter_full_positive, after_keys,
|
|
|
|
rep_->level);
|
|
|
|
}
|
|
|
|
uint64_t filtered_keys = before_keys - after_keys;
|
|
|
|
if (filtered_keys) {
|
|
|
|
RecordTick(rep_->ioptions.statistics, BLOOM_FILTER_USEFUL, filtered_keys);
|
|
|
|
PERF_COUNTER_BY_LEVEL_ADD(bloom_filter_useful, filtered_keys,
|
|
|
|
rep_->level);
|
|
|
|
}
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
6 years ago
|
|
|
} else if (!read_options.total_order_seek && prefix_extractor &&
|
|
|
|
rep_->table_properties->prefix_extractor_name.compare(
|
|
|
|
prefix_extractor->Name()) == 0) {
|
|
|
|
filter->PrefixesMayMatch(range, prefix_extractor, kNotValid, false,
|
|
|
|
lookup_context);
|
|
|
|
RecordTick(rep_->ioptions.statistics, BLOOM_FILTER_PREFIX_CHECKED,
|
|
|
|
before_keys);
|
|
|
|
uint64_t after_keys = range->KeysLeft();
|
|
|
|
uint64_t filtered_keys = before_keys - after_keys;
|
|
|
|
if (filtered_keys) {
|
|
|
|
RecordTick(rep_->ioptions.statistics, BLOOM_FILTER_PREFIX_USEFUL,
|
|
|
|
filtered_keys);
|
|
|
|
}
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
6 years ago
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Skip bottom-level filter block caching when hit-optimized
Summary:
When Get() or NewIterator() trigger file loads, skip caching the filter block if
(1) optimize_filters_for_hits is set and (2) the file is on the bottommost
level. Also skip checking filters under the same conditions, which means that
for a preloaded file or a file that was trivially-moved to the bottom level, its
filter block will eventually expire from the cache.
- added parameters/instance variables in various places in order to propagate the config ("skip_filters") from version_set to block_based_table_reader
- in BlockBasedTable::Rep, this optimization prevents filter from being loaded when the file is opened simply by setting filter_policy = nullptr
- in BlockBasedTable::Get/BlockBasedTable::NewIterator, this optimization prevents filter from being used (even if it was loaded already) by setting filter = nullptr
Test Plan:
updated unit test:
$ ./db_test --gtest_filter=DBTest.OptimizeFiltersForHits
will also run 'make check'
Reviewers: sdong, igor, paultuckfield, anthony, rven, kradhakrishnan, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D51633
9 years ago
|
|
|
Status BlockBasedTable::Get(const ReadOptions& read_options, const Slice& key,
|
|
|
|
GetContext* get_context,
|
|
|
|
const SliceTransform* prefix_extractor,
|
|
|
|
bool skip_filters) {
|
|
|
|
assert(key.size() >= 8); // key must be internal key
|
|
|
|
assert(get_context != nullptr);
|
|
|
|
Status s;
|
|
|
|
const bool no_io = read_options.read_tier == kBlockCacheTier;
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
|
|
|
|
FilterBlockReader* const filter =
|
|
|
|
!skip_filters ? rep_->filter.get() : nullptr;
|
|
|
|
|
|
|
|
// First check the full filter
|
|
|
|
// If full filter not useful, Then go into each block
|
|
|
|
uint64_t tracing_get_id = get_context->get_tracing_get_id();
|
|
|
|
BlockCacheLookupContext lookup_context{
|
|
|
|
TableReaderCaller::kUserGet, tracing_get_id,
|
|
|
|
/*get_from_user_specified_snapshot=*/read_options.snapshot != nullptr};
|
|
|
|
if (block_cache_tracer_ && block_cache_tracer_->is_tracing_enabled()) {
|
|
|
|
// Trace the key since it contains both user key and sequence number.
|
|
|
|
lookup_context.referenced_key = key.ToString();
|
|
|
|
lookup_context.get_from_user_specified_snapshot =
|
|
|
|
read_options.snapshot != nullptr;
|
|
|
|
}
|
|
|
|
TEST_SYNC_POINT("BlockBasedTable::Get:BeforeFilterMatch");
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
const bool may_match =
|
|
|
|
FullFilterKeyMayMatch(read_options, filter, key, no_io, prefix_extractor,
|
|
|
|
get_context, &lookup_context);
|
|
|
|
TEST_SYNC_POINT("BlockBasedTable::Get:AfterFilterMatch");
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
6 years ago
|
|
|
if (!may_match) {
|
|
|
|
RecordTick(rep_->ioptions.statistics, BLOOM_FILTER_USEFUL);
|
|
|
|
PERF_COUNTER_BY_LEVEL_ADD(bloom_filter_useful, 1, rep_->level);
|
|
|
|
} else {
|
|
|
|
IndexBlockIter iiter_on_stack;
|
|
|
|
// if prefix_extractor found in block differs from options, disable
|
|
|
|
// BlockPrefixIndex. Only do this check when index_type is kHashSearch.
|
|
|
|
bool need_upper_bound_check = false;
|
|
|
|
if (rep_->index_type == BlockBasedTableOptions::kHashSearch) {
|
|
|
|
need_upper_bound_check = PrefixExtractorChanged(
|
|
|
|
rep_->table_properties.get(), prefix_extractor);
|
|
|
|
}
|
|
|
|
auto iiter =
|
|
|
|
NewIndexIterator(read_options, need_upper_bound_check, &iiter_on_stack,
|
|
|
|
get_context, &lookup_context);
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
std::unique_ptr<InternalIteratorBase<IndexValue>> iiter_unique_ptr;
|
|
|
|
if (iiter != &iiter_on_stack) {
|
|
|
|
iiter_unique_ptr.reset(iiter);
|
|
|
|
}
|
|
|
|
|
|
|
|
size_t ts_sz =
|
|
|
|
rep_->internal_comparator.user_comparator()->timestamp_size();
|
|
|
|
bool matched = false; // if such user key matched a key in SST
|
|
|
|
bool done = false;
|
|
|
|
for (iiter->Seek(key); iiter->Valid() && !done; iiter->Next()) {
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
IndexValue v = iiter->value();
|
|
|
|
|
|
|
|
bool not_exist_in_filter =
|
|
|
|
filter != nullptr && filter->IsBlockBased() == true &&
|
|
|
|
!filter->KeyMayMatch(ExtractUserKeyAndStripTimestamp(key, ts_sz),
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
prefix_extractor, v.handle.offset(), no_io,
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
/*const_ikey_ptr=*/nullptr, get_context,
|
|
|
|
&lookup_context);
|
|
|
|
|
|
|
|
if (not_exist_in_filter) {
|
|
|
|
// Not found
|
|
|
|
// TODO: think about interaction with Merge. If a user key cannot
|
|
|
|
// cross one data block, we should be fine.
|
|
|
|
RecordTick(rep_->ioptions.statistics, BLOOM_FILTER_USEFUL);
|
|
|
|
PERF_COUNTER_BY_LEVEL_ADD(bloom_filter_useful, 1, rep_->level);
|
|
|
|
break;
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
}
|
|
|
|
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
if (!v.first_internal_key.empty() && !skip_filters &&
|
|
|
|
UserComparatorWrapper(rep_->internal_comparator.user_comparator())
|
|
|
|
.Compare(ExtractUserKey(key),
|
|
|
|
ExtractUserKey(v.first_internal_key)) < 0) {
|
|
|
|
// The requested key falls between highest key in previous block and
|
|
|
|
// lowest key in current block.
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
BlockCacheLookupContext lookup_data_block_context{
|
|
|
|
TableReaderCaller::kUserGet, tracing_get_id,
|
|
|
|
/*get_from_user_specified_snapshot=*/read_options.snapshot !=
|
|
|
|
nullptr};
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
bool does_referenced_key_exist = false;
|
|
|
|
DataBlockIter biter;
|
|
|
|
uint64_t referenced_data_size = 0;
|
|
|
|
NewDataBlockIterator<DataBlockIter>(
|
|
|
|
read_options, v.handle, &biter, BlockType::kData, get_context,
|
|
|
|
&lookup_data_block_context,
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
/*s=*/Status(), /*prefetch_buffer*/ nullptr);
|
|
|
|
|
|
|
|
if (no_io && biter.status().IsIncomplete()) {
|
|
|
|
// couldn't get block from block_cache
|
|
|
|
// Update Saver.state to Found because we are only looking for
|
|
|
|
// whether we can guarantee the key is not there when "no_io" is set
|
|
|
|
get_context->MarkKeyMayExist();
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (!biter.status().ok()) {
|
|
|
|
s = biter.status();
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
bool may_exist = biter.SeekForGet(key);
|
|
|
|
// If user-specified timestamp is supported, we cannot end the search
|
|
|
|
// just because hash index lookup indicates the key+ts does not exist.
|
|
|
|
if (!may_exist && ts_sz == 0) {
|
|
|
|
// HashSeek cannot find the key this block and the the iter is not
|
|
|
|
// the end of the block, i.e. cannot be in the following blocks
|
|
|
|
// either. In this case, the seek_key cannot be found, so we break
|
|
|
|
// from the top level for-loop.
|
|
|
|
done = true;
|
|
|
|
} else {
|
|
|
|
// Call the *saver function on each entry/block until it returns false
|
|
|
|
for (; biter.Valid(); biter.Next()) {
|
|
|
|
ParsedInternalKey parsed_key;
|
|
|
|
Status pik_status = ParseInternalKey(
|
|
|
|
biter.key(), &parsed_key, false /* log_err_key */); // TODO
|
|
|
|
if (!pik_status.ok()) {
|
|
|
|
s = pik_status;
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
}
|
|
|
|
|
|
|
|
if (!get_context->SaveValue(
|
|
|
|
parsed_key, biter.value(), &matched,
|
|
|
|
biter.IsValuePinned() ? &biter : nullptr)) {
|
|
|
|
if (get_context->State() == GetContext::GetState::kFound) {
|
|
|
|
does_referenced_key_exist = true;
|
|
|
|
referenced_data_size = biter.key().size() + biter.value().size();
|
|
|
|
}
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
done = true;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
s = biter.status();
|
|
|
|
}
|
|
|
|
// Write the block cache access record.
|
|
|
|
if (block_cache_tracer_ && block_cache_tracer_->is_tracing_enabled()) {
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
// Avoid making copy of block_key, cf_name, and referenced_key when
|
|
|
|
// constructing the access record.
|
|
|
|
Slice referenced_key;
|
|
|
|
if (does_referenced_key_exist) {
|
|
|
|
referenced_key = biter.key();
|
|
|
|
} else {
|
|
|
|
referenced_key = key;
|
|
|
|
}
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
BlockCacheTraceRecord access_record(
|
|
|
|
rep_->ioptions.env->NowMicros(),
|
|
|
|
/*block_key=*/"", lookup_data_block_context.block_type,
|
|
|
|
lookup_data_block_context.block_size, rep_->cf_id_for_tracing(),
|
|
|
|
/*cf_name=*/"", rep_->level_for_tracing(),
|
|
|
|
rep_->sst_number_for_tracing(), lookup_data_block_context.caller,
|
|
|
|
lookup_data_block_context.is_cache_hit,
|
|
|
|
lookup_data_block_context.no_insert,
|
|
|
|
lookup_data_block_context.get_id,
|
|
|
|
lookup_data_block_context.get_from_user_specified_snapshot,
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
/*referenced_key=*/"", referenced_data_size,
|
|
|
|
lookup_data_block_context.num_keys_in_block,
|
|
|
|
does_referenced_key_exist);
|
|
|
|
// TODO: Should handle status here?
|
|
|
|
block_cache_tracer_
|
|
|
|
->WriteBlockAccess(access_record,
|
|
|
|
lookup_data_block_context.block_key,
|
|
|
|
rep_->cf_name_for_tracing(), referenced_key)
|
|
|
|
.PermitUncheckedError();
|
|
|
|
}
|
|
|
|
|
|
|
|
if (done) {
|
|
|
|
// Avoid the extra Next which is expensive in two-level indexes
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (matched && filter != nullptr && !filter->IsBlockBased()) {
|
|
|
|
RecordTick(rep_->ioptions.statistics, BLOOM_FILTER_FULL_TRUE_POSITIVE);
|
|
|
|
PERF_COUNTER_BY_LEVEL_ADD(bloom_filter_full_true_positive, 1,
|
|
|
|
rep_->level);
|
|
|
|
}
|
|
|
|
if (s.ok() && !iiter->status().IsNotFound()) {
|
|
|
|
s = iiter->status();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
6 years ago
|
|
|
using MultiGetRange = MultiGetContext::Range;
|
|
|
|
void BlockBasedTable::MultiGet(const ReadOptions& read_options,
|
|
|
|
const MultiGetRange* mget_range,
|
|
|
|
const SliceTransform* prefix_extractor,
|
|
|
|
bool skip_filters) {
|
|
|
|
if (mget_range->empty()) {
|
|
|
|
// Caller should ensure non-empty (performance bug)
|
|
|
|
assert(false);
|
|
|
|
return; // Nothing to do
|
|
|
|
}
|
|
|
|
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
FilterBlockReader* const filter =
|
|
|
|
!skip_filters ? rep_->filter.get() : nullptr;
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
6 years ago
|
|
|
MultiGetRange sst_file_range(*mget_range, mget_range->begin(),
|
|
|
|
mget_range->end());
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
|
|
|
|
// First check the full filter
|
|
|
|
// If full filter not useful, Then go into each block
|
|
|
|
const bool no_io = read_options.read_tier == kBlockCacheTier;
|
|
|
|
uint64_t tracing_mget_id = BlockCacheTraceHelper::kReservedGetId;
|
|
|
|
if (sst_file_range.begin()->get_context) {
|
|
|
|
tracing_mget_id = sst_file_range.begin()->get_context->get_tracing_get_id();
|
|
|
|
}
|
|
|
|
BlockCacheLookupContext lookup_context{
|
|
|
|
TableReaderCaller::kUserMultiGet, tracing_mget_id,
|
|
|
|
/*get_from_user_specified_snapshot=*/read_options.snapshot != nullptr};
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
FullFilterKeysMayMatch(read_options, filter, &sst_file_range, no_io,
|
|
|
|
prefix_extractor, &lookup_context);
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
6 years ago
|
|
|
|
|
|
|
if (!sst_file_range.empty()) {
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
6 years ago
|
|
|
IndexBlockIter iiter_on_stack;
|
|
|
|
// if prefix_extractor found in block differs from options, disable
|
|
|
|
// BlockPrefixIndex. Only do this check when index_type is kHashSearch.
|
|
|
|
bool need_upper_bound_check = false;
|
|
|
|
if (rep_->index_type == BlockBasedTableOptions::kHashSearch) {
|
|
|
|
need_upper_bound_check = PrefixExtractorChanged(
|
|
|
|
rep_->table_properties.get(), prefix_extractor);
|
|
|
|
}
|
|
|
|
auto iiter =
|
|
|
|
NewIndexIterator(read_options, need_upper_bound_check, &iiter_on_stack,
|
|
|
|
sst_file_range.begin()->get_context, &lookup_context);
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
std::unique_ptr<InternalIteratorBase<IndexValue>> iiter_unique_ptr;
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
6 years ago
|
|
|
if (iiter != &iiter_on_stack) {
|
|
|
|
iiter_unique_ptr.reset(iiter);
|
|
|
|
}
|
|
|
|
|
|
|
|
uint64_t offset = std::numeric_limits<uint64_t>::max();
|
|
|
|
autovector<BlockHandle, MultiGetContext::MAX_BATCH_SIZE> block_handles;
|
|
|
|
autovector<CachableEntry<Block>, MultiGetContext::MAX_BATCH_SIZE> results;
|
|
|
|
autovector<Status, MultiGetContext::MAX_BATCH_SIZE> statuses;
|
|
|
|
char stack_buf[kMultiGetReadStackBufSize];
|
|
|
|
std::unique_ptr<char[]> block_buf;
|
|
|
|
{
|
|
|
|
MultiGetRange data_block_range(sst_file_range, sst_file_range.begin(),
|
|
|
|
sst_file_range.end());
|
|
|
|
|
|
|
|
CachableEntry<UncompressionDict> uncompression_dict;
|
|
|
|
Status uncompression_dict_status;
|
|
|
|
uncompression_dict_status.PermitUncheckedError();
|
|
|
|
bool uncompression_dict_inited = false;
|
|
|
|
size_t total_len = 0;
|
|
|
|
ReadOptions ro = read_options;
|
|
|
|
ro.read_tier = kBlockCacheTier;
|
|
|
|
|
|
|
|
for (auto miter = data_block_range.begin();
|
|
|
|
miter != data_block_range.end(); ++miter) {
|
|
|
|
const Slice& key = miter->ikey;
|
|
|
|
iiter->Seek(miter->ikey);
|
|
|
|
|
|
|
|
IndexValue v;
|
|
|
|
if (iiter->Valid()) {
|
|
|
|
v = iiter->value();
|
|
|
|
}
|
|
|
|
if (!iiter->Valid() ||
|
|
|
|
(!v.first_internal_key.empty() && !skip_filters &&
|
|
|
|
UserComparatorWrapper(rep_->internal_comparator.user_comparator())
|
|
|
|
.Compare(ExtractUserKey(key),
|
|
|
|
ExtractUserKey(v.first_internal_key)) < 0)) {
|
|
|
|
// The requested key falls between highest key in previous block and
|
|
|
|
// lowest key in current block.
|
|
|
|
if (!iiter->status().IsNotFound()) {
|
|
|
|
*(miter->s) = iiter->status();
|
|
|
|
}
|
|
|
|
data_block_range.SkipKey(miter);
|
|
|
|
sst_file_range.SkipKey(miter);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!uncompression_dict_inited && rep_->uncompression_dict_reader) {
|
|
|
|
uncompression_dict_status =
|
|
|
|
rep_->uncompression_dict_reader->GetOrReadUncompressionDictionary(
|
|
|
|
nullptr /* prefetch_buffer */, no_io,
|
|
|
|
sst_file_range.begin()->get_context, &lookup_context,
|
|
|
|
&uncompression_dict);
|
|
|
|
uncompression_dict_inited = true;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!uncompression_dict_status.ok()) {
|
|
|
|
assert(!uncompression_dict_status.IsNotFound());
|
|
|
|
*(miter->s) = uncompression_dict_status;
|
|
|
|
data_block_range.SkipKey(miter);
|
|
|
|
sst_file_range.SkipKey(miter);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
statuses.emplace_back();
|
|
|
|
results.emplace_back();
|
|
|
|
if (v.handle.offset() == offset) {
|
|
|
|
// We're going to reuse the block for this key later on. No need to
|
|
|
|
// look it up now. Place a null handle
|
|
|
|
block_handles.emplace_back(BlockHandle::NullBlockHandle());
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
// Lookup the cache for the given data block referenced by an index
|
|
|
|
// iterator value (i.e BlockHandle). If it exists in the cache,
|
|
|
|
// initialize block to the contents of the data block.
|
|
|
|
offset = v.handle.offset();
|
|
|
|
BlockHandle handle = v.handle;
|
|
|
|
BlockCacheLookupContext lookup_data_block_context(
|
|
|
|
TableReaderCaller::kUserMultiGet);
|
|
|
|
const UncompressionDict& dict = uncompression_dict.GetValue()
|
|
|
|
? *uncompression_dict.GetValue()
|
|
|
|
: UncompressionDict::GetEmptyDict();
|
|
|
|
Status s = RetrieveBlock(
|
|
|
|
nullptr, ro, handle, dict, &(results.back()), BlockType::kData,
|
|
|
|
miter->get_context, &lookup_data_block_context,
|
|
|
|
/* for_compaction */ false, /* use_cache */ true);
|
|
|
|
if (s.IsIncomplete()) {
|
|
|
|
s = Status::OK();
|
|
|
|
}
|
|
|
|
if (s.ok() && !results.back().IsEmpty()) {
|
|
|
|
// Found it in the cache. Add NULL handle to indicate there is
|
|
|
|
// nothing to read from disk
|
|
|
|
block_handles.emplace_back(BlockHandle::NullBlockHandle());
|
|
|
|
} else {
|
|
|
|
block_handles.emplace_back(handle);
|
|
|
|
total_len += block_size(handle);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (total_len) {
|
|
|
|
char* scratch = nullptr;
|
|
|
|
const UncompressionDict& dict = uncompression_dict.GetValue()
|
|
|
|
? *uncompression_dict.GetValue()
|
|
|
|
: UncompressionDict::GetEmptyDict();
|
|
|
|
assert(uncompression_dict_inited || !rep_->uncompression_dict_reader);
|
|
|
|
assert(uncompression_dict_status.ok());
|
|
|
|
// If using direct IO, then scratch is not used, so keep it nullptr.
|
|
|
|
// If the blocks need to be uncompressed and we don't need the
|
|
|
|
// compressed blocks, then we can use a contiguous block of
|
|
|
|
// memory to read in all the blocks as it will be temporary
|
|
|
|
// storage
|
|
|
|
// 1. If blocks are compressed and compressed block cache is there,
|
|
|
|
// alloc heap bufs
|
|
|
|
// 2. If blocks are uncompressed, alloc heap bufs
|
|
|
|
// 3. If blocks are compressed and no compressed block cache, use
|
|
|
|
// stack buf
|
|
|
|
if (!rep_->file->use_direct_io() &&
|
|
|
|
rep_->table_options.block_cache_compressed == nullptr &&
|
|
|
|
rep_->blocks_maybe_compressed) {
|
|
|
|
if (total_len <= kMultiGetReadStackBufSize) {
|
|
|
|
scratch = stack_buf;
|
|
|
|
} else {
|
|
|
|
scratch = new char[total_len];
|
|
|
|
block_buf.reset(scratch);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
RetrieveMultipleBlocks(read_options, &data_block_range, &block_handles,
|
|
|
|
&statuses, &results, scratch, dict);
|
|
|
|
if (sst_file_range.begin()->get_context) {
|
|
|
|
++(sst_file_range.begin()
|
|
|
|
->get_context->get_context_stats_.num_sst_read);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
DataBlockIter first_biter;
|
|
|
|
DataBlockIter next_biter;
|
|
|
|
size_t idx_in_batch = 0;
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
6 years ago
|
|
|
for (auto miter = sst_file_range.begin(); miter != sst_file_range.end();
|
|
|
|
++miter) {
|
|
|
|
Status s;
|
|
|
|
GetContext* get_context = miter->get_context;
|
|
|
|
const Slice& key = miter->ikey;
|
|
|
|
bool matched = false; // if such user key matched a key in SST
|
|
|
|
bool done = false;
|
|
|
|
bool first_block = true;
|
|
|
|
do {
|
|
|
|
DataBlockIter* biter = nullptr;
|
|
|
|
bool reusing_block = true;
|
|
|
|
uint64_t referenced_data_size = 0;
|
|
|
|
bool does_referenced_key_exist = false;
|
|
|
|
BlockCacheLookupContext lookup_data_block_context(
|
|
|
|
TableReaderCaller::kUserMultiGet, tracing_mget_id,
|
|
|
|
/*get_from_user_specified_snapshot=*/read_options.snapshot !=
|
|
|
|
nullptr);
|
|
|
|
if (first_block) {
|
|
|
|
if (!block_handles[idx_in_batch].IsNull() ||
|
|
|
|
!results[idx_in_batch].IsEmpty()) {
|
|
|
|
first_biter.Invalidate(Status::OK());
|
|
|
|
NewDataBlockIterator<DataBlockIter>(
|
|
|
|
read_options, results[idx_in_batch], &first_biter,
|
|
|
|
statuses[idx_in_batch]);
|
|
|
|
reusing_block = false;
|
|
|
|
} else {
|
|
|
|
// If handler is null and result is empty, then the status is never
|
|
|
|
// set, which should be the initial value: ok().
|
|
|
|
assert(statuses[idx_in_batch].ok());
|
|
|
|
}
|
|
|
|
biter = &first_biter;
|
|
|
|
idx_in_batch++;
|
|
|
|
} else {
|
|
|
|
IndexValue v = iiter->value();
|
|
|
|
if (!v.first_internal_key.empty() && !skip_filters &&
|
|
|
|
UserComparatorWrapper(rep_->internal_comparator.user_comparator())
|
|
|
|
.Compare(ExtractUserKey(key),
|
|
|
|
ExtractUserKey(v.first_internal_key)) < 0) {
|
|
|
|
// The requested key falls between highest key in previous block and
|
|
|
|
// lowest key in current block.
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
next_biter.Invalidate(Status::OK());
|
|
|
|
NewDataBlockIterator<DataBlockIter>(
|
|
|
|
read_options, iiter->value().handle, &next_biter,
|
|
|
|
BlockType::kData, get_context, &lookup_data_block_context,
|
|
|
|
Status(), nullptr);
|
|
|
|
biter = &next_biter;
|
|
|
|
reusing_block = false;
|
|
|
|
}
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
6 years ago
|
|
|
if (read_options.read_tier == kBlockCacheTier &&
|
|
|
|
biter->status().IsIncomplete()) {
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
6 years ago
|
|
|
// couldn't get block from block_cache
|
|
|
|
// Update Saver.state to Found because we are only looking for
|
|
|
|
// whether we can guarantee the key is not there when "no_io" is set
|
|
|
|
get_context->MarkKeyMayExist();
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (!biter->status().ok()) {
|
|
|
|
s = biter->status();
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
6 years ago
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool may_exist = biter->SeekForGet(key);
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
6 years ago
|
|
|
if (!may_exist) {
|
|
|
|
// HashSeek cannot find the key this block and the the iter is not
|
|
|
|
// the end of the block, i.e. cannot be in the following blocks
|
|
|
|
// either. In this case, the seek_key cannot be found, so we break
|
|
|
|
// from the top level for-loop.
|
|
|
|
break;
|
|
|
|
}
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
6 years ago
|
|
|
|
|
|
|
// Call the *saver function on each entry/block until it returns false
|
|
|
|
for (; biter->Valid(); biter->Next()) {
|
|
|
|
ParsedInternalKey parsed_key;
|
|
|
|
Cleanable dummy;
|
|
|
|
Cleanable* value_pinner = nullptr;
|
|
|
|
Status pik_status = ParseInternalKey(
|
|
|
|
biter->key(), &parsed_key, false /* log_err_key */); // TODO
|
|
|
|
if (!pik_status.ok()) {
|
|
|
|
s = pik_status;
|
|
|
|
}
|
|
|
|
if (biter->IsValuePinned()) {
|
|
|
|
if (reusing_block) {
|
|
|
|
Cache* block_cache = rep_->table_options.block_cache.get();
|
|
|
|
assert(biter->cache_handle() != nullptr);
|
|
|
|
block_cache->Ref(biter->cache_handle());
|
|
|
|
dummy.RegisterCleanup(&ReleaseCachedEntry, block_cache,
|
|
|
|
biter->cache_handle());
|
|
|
|
value_pinner = &dummy;
|
|
|
|
} else {
|
|
|
|
value_pinner = biter;
|
|
|
|
}
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
6 years ago
|
|
|
}
|
|
|
|
if (!get_context->SaveValue(parsed_key, biter->value(), &matched,
|
|
|
|
value_pinner)) {
|
|
|
|
if (get_context->State() == GetContext::GetState::kFound) {
|
|
|
|
does_referenced_key_exist = true;
|
|
|
|
referenced_data_size =
|
|
|
|
biter->key().size() + biter->value().size();
|
|
|
|
}
|
|
|
|
done = true;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
s = biter->status();
|
|
|
|
}
|
|
|
|
// Write the block cache access.
|
|
|
|
if (block_cache_tracer_ && block_cache_tracer_->is_tracing_enabled()) {
|
|
|
|
// Avoid making copy of block_key, cf_name, and referenced_key when
|
|
|
|
// constructing the access record.
|
|
|
|
Slice referenced_key;
|
|
|
|
if (does_referenced_key_exist) {
|
|
|
|
referenced_key = biter->key();
|
|
|
|
} else {
|
|
|
|
referenced_key = key;
|
|
|
|
}
|
|
|
|
BlockCacheTraceRecord access_record(
|
|
|
|
rep_->ioptions.env->NowMicros(),
|
|
|
|
/*block_key=*/"", lookup_data_block_context.block_type,
|
|
|
|
lookup_data_block_context.block_size, rep_->cf_id_for_tracing(),
|
|
|
|
/*cf_name=*/"", rep_->level_for_tracing(),
|
|
|
|
rep_->sst_number_for_tracing(), lookup_data_block_context.caller,
|
|
|
|
lookup_data_block_context.is_cache_hit,
|
|
|
|
lookup_data_block_context.no_insert,
|
|
|
|
lookup_data_block_context.get_id,
|
|
|
|
lookup_data_block_context.get_from_user_specified_snapshot,
|
|
|
|
/*referenced_key=*/"", referenced_data_size,
|
|
|
|
lookup_data_block_context.num_keys_in_block,
|
|
|
|
does_referenced_key_exist);
|
|
|
|
// TODO: Should handle status here?
|
|
|
|
block_cache_tracer_
|
|
|
|
->WriteBlockAccess(access_record,
|
|
|
|
lookup_data_block_context.block_key,
|
|
|
|
rep_->cf_name_for_tracing(), referenced_key)
|
|
|
|
.PermitUncheckedError();
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
6 years ago
|
|
|
}
|
|
|
|
s = biter->status();
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
6 years ago
|
|
|
if (done) {
|
|
|
|
// Avoid the extra Next which is expensive in two-level indexes
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (first_block) {
|
|
|
|
iiter->Seek(key);
|
|
|
|
}
|
|
|
|
first_block = false;
|
|
|
|
iiter->Next();
|
|
|
|
} while (iiter->Valid());
|
|
|
|
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
6 years ago
|
|
|
if (matched && filter != nullptr && !filter->IsBlockBased()) {
|
|
|
|
RecordTick(rep_->ioptions.statistics, BLOOM_FILTER_FULL_TRUE_POSITIVE);
|
|
|
|
PERF_COUNTER_BY_LEVEL_ADD(bloom_filter_full_true_positive, 1,
|
|
|
|
rep_->level);
|
|
|
|
}
|
|
|
|
if (s.ok() && !iiter->status().IsNotFound()) {
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
6 years ago
|
|
|
s = iiter->status();
|
|
|
|
}
|
|
|
|
*(miter->s) = s;
|
|
|
|
}
|
|
|
|
#ifdef ROCKSDB_ASSERT_STATUS_CHECKED
|
|
|
|
// Not sure why we need to do it. Should investigate more.
|
|
|
|
for (auto& st : statuses) {
|
|
|
|
st.PermitUncheckedError();
|
|
|
|
}
|
|
|
|
#endif // ROCKSDB_ASSERT_STATUS_CHECKED
|
Introduce a new MultiGet batching implementation (#5011)
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
6 years ago
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
Status BlockBasedTable::Prefetch(const Slice* const begin,
|
|
|
|
const Slice* const end) {
|
|
|
|
auto& comparator = rep_->internal_comparator;
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
UserComparatorWrapper user_comparator(comparator.user_comparator());
|
|
|
|
// pre-condition
|
|
|
|
if (begin && end && comparator.Compare(*begin, *end) > 0) {
|
|
|
|
return Status::InvalidArgument(*begin, *end);
|
|
|
|
}
|
|
|
|
BlockCacheLookupContext lookup_context{TableReaderCaller::kPrefetch};
|
|
|
|
IndexBlockIter iiter_on_stack;
|
|
|
|
auto iiter = NewIndexIterator(ReadOptions(), /*need_upper_bound_check=*/false,
|
|
|
|
&iiter_on_stack, /*get_context=*/nullptr,
|
|
|
|
&lookup_context);
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
std::unique_ptr<InternalIteratorBase<IndexValue>> iiter_unique_ptr;
|
|
|
|
if (iiter != &iiter_on_stack) {
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
iiter_unique_ptr = std::unique_ptr<InternalIteratorBase<IndexValue>>(iiter);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!iiter->status().ok()) {
|
|
|
|
// error opening index iterator
|
|
|
|
return iiter->status();
|
|
|
|
}
|
|
|
|
|
|
|
|
// indicates if we are on the last page that need to be pre-fetched
|
|
|
|
bool prefetching_boundary_page = false;
|
|
|
|
|
|
|
|
for (begin ? iiter->Seek(*begin) : iiter->SeekToFirst(); iiter->Valid();
|
|
|
|
iiter->Next()) {
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
BlockHandle block_handle = iiter->value().handle;
|
|
|
|
const bool is_user_key = !rep_->index_key_includes_seq;
|
|
|
|
if (end &&
|
|
|
|
((!is_user_key && comparator.Compare(iiter->key(), *end) >= 0) ||
|
|
|
|
(is_user_key &&
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
user_comparator.Compare(iiter->key(), ExtractUserKey(*end)) >= 0))) {
|
|
|
|
if (prefetching_boundary_page) {
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
// The index entry represents the last key in the data block.
|
|
|
|
// We should load this page into memory as well, but no more
|
|
|
|
prefetching_boundary_page = true;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Load the block specified by the block_handle into the block cache
|
|
|
|
DataBlockIter biter;
|
|
|
|
|
|
|
|
NewDataBlockIterator<DataBlockIter>(
|
|
|
|
ReadOptions(), block_handle, &biter, /*type=*/BlockType::kData,
|
|
|
|
/*get_context=*/nullptr, &lookup_context, Status(),
|
|
|
|
/*prefetch_buffer=*/nullptr);
|
|
|
|
|
|
|
|
if (!biter.status().ok()) {
|
|
|
|
// there was an unexpected error while pre-fetching
|
|
|
|
return biter.status();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
|
|
|
Status BlockBasedTable::VerifyChecksum(const ReadOptions& read_options,
|
|
|
|
TableReaderCaller caller) {
|
|
|
|
Status s;
|
|
|
|
// Check Meta blocks
|
|
|
|
std::unique_ptr<Block> metaindex;
|
|
|
|
std::unique_ptr<InternalIterator> metaindex_iter;
|
|
|
|
ReadOptions ro;
|
|
|
|
s = ReadMetaIndexBlock(ro, nullptr /* prefetch buffer */, &metaindex,
|
|
|
|
&metaindex_iter);
|
|
|
|
if (s.ok()) {
|
|
|
|
s = VerifyChecksumInMetaBlocks(metaindex_iter.get());
|
|
|
|
if (!s.ok()) {
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
// Check Data blocks
|
|
|
|
IndexBlockIter iiter_on_stack;
|
|
|
|
BlockCacheLookupContext context{caller};
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
InternalIteratorBase<IndexValue>* iiter = NewIndexIterator(
|
|
|
|
read_options, /*disable_prefix_seek=*/false, &iiter_on_stack,
|
|
|
|
/*get_context=*/nullptr, &context);
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
std::unique_ptr<InternalIteratorBase<IndexValue>> iiter_unique_ptr;
|
|
|
|
if (iiter != &iiter_on_stack) {
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
iiter_unique_ptr = std::unique_ptr<InternalIteratorBase<IndexValue>>(iiter);
|
|
|
|
}
|
|
|
|
if (!iiter->status().ok()) {
|
|
|
|
// error opening index iterator
|
|
|
|
return iiter->status();
|
|
|
|
}
|
|
|
|
s = VerifyChecksumInBlocks(read_options, iiter);
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
Status BlockBasedTable::VerifyChecksumInBlocks(
|
|
|
|
const ReadOptions& read_options,
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
InternalIteratorBase<IndexValue>* index_iter) {
|
|
|
|
Status s;
|
|
|
|
// We are scanning the whole file, so no need to do exponential
|
|
|
|
// increasing of the buffer size.
|
|
|
|
size_t readahead_size = (read_options.readahead_size != 0)
|
|
|
|
? read_options.readahead_size
|
|
|
|
: kMaxAutoReadaheadSize;
|
|
|
|
// FilePrefetchBuffer doesn't work in mmap mode and readahead is not
|
|
|
|
// needed there.
|
|
|
|
FilePrefetchBuffer prefetch_buffer(
|
|
|
|
rep_->file.get(), readahead_size /* readadhead_size */,
|
|
|
|
readahead_size /* max_readahead_size */,
|
|
|
|
!rep_->ioptions.allow_mmap_reads /* enable */);
|
|
|
|
|
|
|
|
for (index_iter->SeekToFirst(); index_iter->Valid(); index_iter->Next()) {
|
|
|
|
s = index_iter->status();
|
|
|
|
if (!s.ok()) {
|
|
|
|
break;
|
|
|
|
}
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
BlockHandle handle = index_iter->value().handle;
|
|
|
|
BlockContents contents;
|
|
|
|
BlockFetcher block_fetcher(
|
|
|
|
rep_->file.get(), &prefetch_buffer, rep_->footer, ReadOptions(), handle,
|
|
|
|
&contents, rep_->ioptions, false /* decompress */,
|
|
|
|
false /*maybe_compressed*/, BlockType::kData,
|
|
|
|
UncompressionDict::GetEmptyDict(), rep_->persistent_cache_options);
|
|
|
|
s = block_fetcher.ReadBlockContents();
|
|
|
|
if (!s.ok()) {
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (s.ok()) {
|
|
|
|
// In the case of two level indexes, we would have exited the above loop
|
|
|
|
// by checking index_iter->Valid(), but Valid() might have returned false
|
|
|
|
// due to an IO error. So check the index_iter status
|
|
|
|
s = index_iter->status();
|
|
|
|
}
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
BlockType BlockBasedTable::GetBlockTypeForMetaBlockByName(
|
|
|
|
const Slice& meta_block_name) {
|
|
|
|
if (meta_block_name.starts_with(kFilterBlockPrefix) ||
|
|
|
|
meta_block_name.starts_with(kFullFilterBlockPrefix) ||
|
|
|
|
meta_block_name.starts_with(kPartitionedFilterBlockPrefix)) {
|
|
|
|
return BlockType::kFilter;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (meta_block_name == kPropertiesBlock) {
|
|
|
|
return BlockType::kProperties;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (meta_block_name == kCompressionDictBlock) {
|
|
|
|
return BlockType::kCompressionDictionary;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (meta_block_name == kRangeDelBlock) {
|
|
|
|
return BlockType::kRangeDeletion;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (meta_block_name == kHashIndexPrefixesBlock) {
|
|
|
|
return BlockType::kHashIndexPrefixes;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (meta_block_name == kHashIndexPrefixesMetadataBlock) {
|
|
|
|
return BlockType::kHashIndexMetadata;
|
|
|
|
}
|
|
|
|
|
|
|
|
assert(false);
|
|
|
|
return BlockType::kInvalid;
|
|
|
|
}
|
|
|
|
|
|
|
|
Status BlockBasedTable::VerifyChecksumInMetaBlocks(
|
|
|
|
InternalIteratorBase<Slice>* index_iter) {
|
|
|
|
Status s;
|
|
|
|
for (index_iter->SeekToFirst(); index_iter->Valid(); index_iter->Next()) {
|
|
|
|
s = index_iter->status();
|
|
|
|
if (!s.ok()) {
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
BlockHandle handle;
|
|
|
|
Slice input = index_iter->value();
|
|
|
|
s = handle.DecodeFrom(&input);
|
|
|
|
BlockContents contents;
|
|
|
|
const Slice meta_block_name = index_iter->key();
|
|
|
|
BlockFetcher block_fetcher(
|
|
|
|
rep_->file.get(), nullptr /* prefetch buffer */, rep_->footer,
|
|
|
|
ReadOptions(), handle, &contents, rep_->ioptions,
|
|
|
|
false /* decompress */, false /*maybe_compressed*/,
|
|
|
|
GetBlockTypeForMetaBlockByName(meta_block_name),
|
|
|
|
UncompressionDict::GetEmptyDict(), rep_->persistent_cache_options);
|
|
|
|
s = block_fetcher.ReadBlockContents();
|
|
|
|
if (s.IsCorruption() && meta_block_name == kPropertiesBlock) {
|
|
|
|
TableProperties* table_properties;
|
|
|
|
ReadOptions ro;
|
|
|
|
s = TryReadPropertiesWithGlobalSeqno(ro, nullptr /* prefetch_buffer */,
|
|
|
|
index_iter->value(),
|
|
|
|
&table_properties);
|
|
|
|
delete table_properties;
|
|
|
|
}
|
|
|
|
if (!s.ok()) {
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
Move the index readers out of the block cache (#5298)
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
6 years ago
|
|
|
bool BlockBasedTable::TEST_BlockInCache(const BlockHandle& handle) const {
|
|
|
|
assert(rep_ != nullptr);
|
|
|
|
|
|
|
|
Cache* const cache = rep_->table_options.block_cache.get();
|
|
|
|
if (cache == nullptr) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
char cache_key_storage[kMaxCacheKeyPrefixSize + kMaxVarint64Length];
|
|
|
|
Slice cache_key =
|
|
|
|
GetCacheKey(rep_->cache_key_prefix, rep_->cache_key_prefix_size, handle,
|
|
|
|
cache_key_storage);
|
Move the index readers out of the block cache (#5298)
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
6 years ago
|
|
|
|
|
|
|
Cache::Handle* const cache_handle = cache->Lookup(cache_key);
|
|
|
|
if (cache_handle == nullptr) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
cache->Release(cache_handle);
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool BlockBasedTable::TEST_KeyInCache(const ReadOptions& options,
|
|
|
|
const Slice& key) {
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
std::unique_ptr<InternalIteratorBase<IndexValue>> iiter(NewIndexIterator(
|
|
|
|
options, /*need_upper_bound_check=*/false, /*input_iter=*/nullptr,
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
/*get_context=*/nullptr, /*lookup_context=*/nullptr));
|
|
|
|
iiter->Seek(key);
|
|
|
|
assert(iiter->Valid());
|
|
|
|
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
return TEST_BlockInCache(iiter->value().handle);
|
|
|
|
}
|
|
|
|
|
|
|
|
// REQUIRES: The following fields of rep_ should have already been populated:
|
|
|
|
// 1. file
|
|
|
|
// 2. index_handle,
|
|
|
|
// 3. options
|
|
|
|
// 4. internal_comparator
|
|
|
|
// 5. index_type
|
|
|
|
Status BlockBasedTable::CreateIndexReader(
|
|
|
|
const ReadOptions& ro, FilePrefetchBuffer* prefetch_buffer,
|
Move the index readers out of the block cache (#5298)
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
6 years ago
|
|
|
InternalIterator* preloaded_meta_index_iter, bool use_cache, bool prefetch,
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
bool pin, BlockCacheLookupContext* lookup_context,
|
|
|
|
std::unique_ptr<IndexReader>* index_reader) {
|
|
|
|
// kHashSearch requires non-empty prefix_extractor but bypass checking
|
|
|
|
// prefix_extractor here since we have no access to MutableCFOptions.
|
|
|
|
// Add need_upper_bound_check flag in BlockBasedTable::NewIndexIterator.
|
|
|
|
// If prefix_extractor does not match prefix_extractor_name from table
|
|
|
|
// properties, turn off Hash Index by setting total_order_seek to true
|
|
|
|
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
switch (rep_->index_type) {
|
|
|
|
case BlockBasedTableOptions::kTwoLevelIndexSearch: {
|
|
|
|
return PartitionIndexReader::Create(this, ro, prefetch_buffer, use_cache,
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
prefetch, pin, lookup_context,
|
|
|
|
index_reader);
|
|
|
|
}
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
case BlockBasedTableOptions::kBinarySearch:
|
|
|
|
FALLTHROUGH_INTENDED;
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
case BlockBasedTableOptions::kBinarySearchWithFirstKey: {
|
|
|
|
return BinarySearchIndexReader::Create(this, ro, prefetch_buffer,
|
|
|
|
use_cache, prefetch, pin,
|
|
|
|
lookup_context, index_reader);
|
|
|
|
}
|
|
|
|
case BlockBasedTableOptions::kHashSearch: {
|
|
|
|
std::unique_ptr<Block> metaindex_guard;
|
|
|
|
std::unique_ptr<InternalIterator> metaindex_iter_guard;
|
|
|
|
auto meta_index_iter = preloaded_meta_index_iter;
|
|
|
|
bool should_fallback = false;
|
|
|
|
if (rep_->internal_prefix_transform.get() == nullptr) {
|
|
|
|
ROCKS_LOG_WARN(rep_->ioptions.info_log,
|
|
|
|
"No prefix extractor passed in. Fall back to binary"
|
|
|
|
" search index.");
|
|
|
|
should_fallback = true;
|
|
|
|
} else if (meta_index_iter == nullptr) {
|
|
|
|
auto s = ReadMetaIndexBlock(ro, prefetch_buffer, &metaindex_guard,
|
|
|
|
&metaindex_iter_guard);
|
|
|
|
if (!s.ok()) {
|
|
|
|
// we simply fall back to binary search in case there is any
|
|
|
|
// problem with prefix hash index loading.
|
|
|
|
ROCKS_LOG_WARN(rep_->ioptions.info_log,
|
|
|
|
"Unable to read the metaindex block."
|
|
|
|
" Fall back to binary search index.");
|
|
|
|
should_fallback = true;
|
|
|
|
}
|
|
|
|
meta_index_iter = metaindex_iter_guard.get();
|
|
|
|
}
|
|
|
|
|
|
|
|
if (should_fallback) {
|
|
|
|
return BinarySearchIndexReader::Create(this, ro, prefetch_buffer,
|
|
|
|
use_cache, prefetch, pin,
|
|
|
|
lookup_context, index_reader);
|
|
|
|
} else {
|
|
|
|
return HashIndexReader::Create(this, ro, prefetch_buffer,
|
|
|
|
meta_index_iter, use_cache, prefetch,
|
|
|
|
pin, lookup_context, index_reader);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
default: {
|
|
|
|
std::string error_message =
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
"Unrecognized index type: " + ToString(rep_->index_type);
|
|
|
|
return Status::InvalidArgument(error_message.c_str());
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
For ApproximateSizes, pro-rate table metadata size over data blocks (#6784)
Summary:
The implementation of GetApproximateSizes was inconsistent in
its treatment of the size of non-data blocks of SST files, sometimes
including and sometimes now. This was at its worst with large portion
of table file used by filters and querying a small range that crossed
a table boundary: the size estimate would include large filter size.
It's conceivable that someone might want only to know the size in terms
of data blocks, but I believe that's unlikely enough to ignore for now.
Similarly, there's no evidence the internal function AppoximateOffsetOf
is used for anything other than a one-sided ApproximateSize, so I intend
to refactor to remove redundancy in a follow-up commit.
So to fix this, GetApproximateSizes (and implementation details
ApproximateSize and ApproximateOffsetOf) now consistently include in
their returned sizes a portion of table file metadata (incl filters
and indexes) based on the size portion of the data blocks in range. In
other words, if a key range covers data blocks that are X% by size of all
the table's data blocks, returned approximate size is X% of the total
file size. It would technically be more accurate to attribute metadata
based on number of keys, but that's not computationally efficient with
data available and rarely a meaningful difference.
Also includes miscellaneous comment improvements / clarifications.
Also included is a new approximatesizerandom benchmark for db_bench.
No significant performance difference seen with this change, whether ~700 ops/sec with cache_index_and_filter_blocks and small cache or ~150k ops/sec without cache_index_and_filter_blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6784
Test Plan:
Test added to DBTest.ApproximateSizesFilesWithErrorMargin.
Old code running new test...
[ RUN ] DBTest.ApproximateSizesFilesWithErrorMargin
db/db_test.cc:1562: Failure
Expected: (size) <= (11 * 100), actual: 9478 vs 1100
Other tests updated to reflect consistent accounting of metadata.
Reviewed By: siying
Differential Revision: D21334706
Pulled By: pdillinger
fbshipit-source-id: 6f86870e45213334fedbe9c73b4ebb1d8d611185
5 years ago
|
|
|
uint64_t BlockBasedTable::ApproximateDataOffsetOf(
|
|
|
|
const InternalIteratorBase<IndexValue>& index_iter,
|
|
|
|
uint64_t data_size) const {
|
|
|
|
if (index_iter.Valid()) {
|
|
|
|
BlockHandle handle = index_iter.value().handle;
|
For ApproximateSizes, pro-rate table metadata size over data blocks (#6784)
Summary:
The implementation of GetApproximateSizes was inconsistent in
its treatment of the size of non-data blocks of SST files, sometimes
including and sometimes now. This was at its worst with large portion
of table file used by filters and querying a small range that crossed
a table boundary: the size estimate would include large filter size.
It's conceivable that someone might want only to know the size in terms
of data blocks, but I believe that's unlikely enough to ignore for now.
Similarly, there's no evidence the internal function AppoximateOffsetOf
is used for anything other than a one-sided ApproximateSize, so I intend
to refactor to remove redundancy in a follow-up commit.
So to fix this, GetApproximateSizes (and implementation details
ApproximateSize and ApproximateOffsetOf) now consistently include in
their returned sizes a portion of table file metadata (incl filters
and indexes) based on the size portion of the data blocks in range. In
other words, if a key range covers data blocks that are X% by size of all
the table's data blocks, returned approximate size is X% of the total
file size. It would technically be more accurate to attribute metadata
based on number of keys, but that's not computationally efficient with
data available and rarely a meaningful difference.
Also includes miscellaneous comment improvements / clarifications.
Also included is a new approximatesizerandom benchmark for db_bench.
No significant performance difference seen with this change, whether ~700 ops/sec with cache_index_and_filter_blocks and small cache or ~150k ops/sec without cache_index_and_filter_blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6784
Test Plan:
Test added to DBTest.ApproximateSizesFilesWithErrorMargin.
Old code running new test...
[ RUN ] DBTest.ApproximateSizesFilesWithErrorMargin
db/db_test.cc:1562: Failure
Expected: (size) <= (11 * 100), actual: 9478 vs 1100
Other tests updated to reflect consistent accounting of metadata.
Reviewed By: siying
Differential Revision: D21334706
Pulled By: pdillinger
fbshipit-source-id: 6f86870e45213334fedbe9c73b4ebb1d8d611185
5 years ago
|
|
|
return handle.offset();
|
|
|
|
} else {
|
For ApproximateSizes, pro-rate table metadata size over data blocks (#6784)
Summary:
The implementation of GetApproximateSizes was inconsistent in
its treatment of the size of non-data blocks of SST files, sometimes
including and sometimes now. This was at its worst with large portion
of table file used by filters and querying a small range that crossed
a table boundary: the size estimate would include large filter size.
It's conceivable that someone might want only to know the size in terms
of data blocks, but I believe that's unlikely enough to ignore for now.
Similarly, there's no evidence the internal function AppoximateOffsetOf
is used for anything other than a one-sided ApproximateSize, so I intend
to refactor to remove redundancy in a follow-up commit.
So to fix this, GetApproximateSizes (and implementation details
ApproximateSize and ApproximateOffsetOf) now consistently include in
their returned sizes a portion of table file metadata (incl filters
and indexes) based on the size portion of the data blocks in range. In
other words, if a key range covers data blocks that are X% by size of all
the table's data blocks, returned approximate size is X% of the total
file size. It would technically be more accurate to attribute metadata
based on number of keys, but that's not computationally efficient with
data available and rarely a meaningful difference.
Also includes miscellaneous comment improvements / clarifications.
Also included is a new approximatesizerandom benchmark for db_bench.
No significant performance difference seen with this change, whether ~700 ops/sec with cache_index_and_filter_blocks and small cache or ~150k ops/sec without cache_index_and_filter_blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6784
Test Plan:
Test added to DBTest.ApproximateSizesFilesWithErrorMargin.
Old code running new test...
[ RUN ] DBTest.ApproximateSizesFilesWithErrorMargin
db/db_test.cc:1562: Failure
Expected: (size) <= (11 * 100), actual: 9478 vs 1100
Other tests updated to reflect consistent accounting of metadata.
Reviewed By: siying
Differential Revision: D21334706
Pulled By: pdillinger
fbshipit-source-id: 6f86870e45213334fedbe9c73b4ebb1d8d611185
5 years ago
|
|
|
// The iterator is past the last key in the file.
|
|
|
|
return data_size;
|
|
|
|
}
|
For ApproximateSizes, pro-rate table metadata size over data blocks (#6784)
Summary:
The implementation of GetApproximateSizes was inconsistent in
its treatment of the size of non-data blocks of SST files, sometimes
including and sometimes now. This was at its worst with large portion
of table file used by filters and querying a small range that crossed
a table boundary: the size estimate would include large filter size.
It's conceivable that someone might want only to know the size in terms
of data blocks, but I believe that's unlikely enough to ignore for now.
Similarly, there's no evidence the internal function AppoximateOffsetOf
is used for anything other than a one-sided ApproximateSize, so I intend
to refactor to remove redundancy in a follow-up commit.
So to fix this, GetApproximateSizes (and implementation details
ApproximateSize and ApproximateOffsetOf) now consistently include in
their returned sizes a portion of table file metadata (incl filters
and indexes) based on the size portion of the data blocks in range. In
other words, if a key range covers data blocks that are X% by size of all
the table's data blocks, returned approximate size is X% of the total
file size. It would technically be more accurate to attribute metadata
based on number of keys, but that's not computationally efficient with
data available and rarely a meaningful difference.
Also includes miscellaneous comment improvements / clarifications.
Also included is a new approximatesizerandom benchmark for db_bench.
No significant performance difference seen with this change, whether ~700 ops/sec with cache_index_and_filter_blocks and small cache or ~150k ops/sec without cache_index_and_filter_blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6784
Test Plan:
Test added to DBTest.ApproximateSizesFilesWithErrorMargin.
Old code running new test...
[ RUN ] DBTest.ApproximateSizesFilesWithErrorMargin
db/db_test.cc:1562: Failure
Expected: (size) <= (11 * 100), actual: 9478 vs 1100
Other tests updated to reflect consistent accounting of metadata.
Reviewed By: siying
Differential Revision: D21334706
Pulled By: pdillinger
fbshipit-source-id: 6f86870e45213334fedbe9c73b4ebb1d8d611185
5 years ago
|
|
|
}
|
|
|
|
|
For ApproximateSizes, pro-rate table metadata size over data blocks (#6784)
Summary:
The implementation of GetApproximateSizes was inconsistent in
its treatment of the size of non-data blocks of SST files, sometimes
including and sometimes now. This was at its worst with large portion
of table file used by filters and querying a small range that crossed
a table boundary: the size estimate would include large filter size.
It's conceivable that someone might want only to know the size in terms
of data blocks, but I believe that's unlikely enough to ignore for now.
Similarly, there's no evidence the internal function AppoximateOffsetOf
is used for anything other than a one-sided ApproximateSize, so I intend
to refactor to remove redundancy in a follow-up commit.
So to fix this, GetApproximateSizes (and implementation details
ApproximateSize and ApproximateOffsetOf) now consistently include in
their returned sizes a portion of table file metadata (incl filters
and indexes) based on the size portion of the data blocks in range. In
other words, if a key range covers data blocks that are X% by size of all
the table's data blocks, returned approximate size is X% of the total
file size. It would technically be more accurate to attribute metadata
based on number of keys, but that's not computationally efficient with
data available and rarely a meaningful difference.
Also includes miscellaneous comment improvements / clarifications.
Also included is a new approximatesizerandom benchmark for db_bench.
No significant performance difference seen with this change, whether ~700 ops/sec with cache_index_and_filter_blocks and small cache or ~150k ops/sec without cache_index_and_filter_blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6784
Test Plan:
Test added to DBTest.ApproximateSizesFilesWithErrorMargin.
Old code running new test...
[ RUN ] DBTest.ApproximateSizesFilesWithErrorMargin
db/db_test.cc:1562: Failure
Expected: (size) <= (11 * 100), actual: 9478 vs 1100
Other tests updated to reflect consistent accounting of metadata.
Reviewed By: siying
Differential Revision: D21334706
Pulled By: pdillinger
fbshipit-source-id: 6f86870e45213334fedbe9c73b4ebb1d8d611185
5 years ago
|
|
|
uint64_t BlockBasedTable::GetApproximateDataSize() {
|
|
|
|
// Should be in table properties unless super old version
|
|
|
|
if (rep_->table_properties) {
|
|
|
|
return rep_->table_properties->data_size;
|
|
|
|
}
|
|
|
|
// Fall back to rough estimate from footer
|
|
|
|
return rep_->footer.metaindex_handle().offset();
|
|
|
|
}
|
|
|
|
|
|
|
|
uint64_t BlockBasedTable::ApproximateOffsetOf(const Slice& key,
|
|
|
|
TableReaderCaller caller) {
|
For ApproximateSizes, pro-rate table metadata size over data blocks (#6784)
Summary:
The implementation of GetApproximateSizes was inconsistent in
its treatment of the size of non-data blocks of SST files, sometimes
including and sometimes now. This was at its worst with large portion
of table file used by filters and querying a small range that crossed
a table boundary: the size estimate would include large filter size.
It's conceivable that someone might want only to know the size in terms
of data blocks, but I believe that's unlikely enough to ignore for now.
Similarly, there's no evidence the internal function AppoximateOffsetOf
is used for anything other than a one-sided ApproximateSize, so I intend
to refactor to remove redundancy in a follow-up commit.
So to fix this, GetApproximateSizes (and implementation details
ApproximateSize and ApproximateOffsetOf) now consistently include in
their returned sizes a portion of table file metadata (incl filters
and indexes) based on the size portion of the data blocks in range. In
other words, if a key range covers data blocks that are X% by size of all
the table's data blocks, returned approximate size is X% of the total
file size. It would technically be more accurate to attribute metadata
based on number of keys, but that's not computationally efficient with
data available and rarely a meaningful difference.
Also includes miscellaneous comment improvements / clarifications.
Also included is a new approximatesizerandom benchmark for db_bench.
No significant performance difference seen with this change, whether ~700 ops/sec with cache_index_and_filter_blocks and small cache or ~150k ops/sec without cache_index_and_filter_blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6784
Test Plan:
Test added to DBTest.ApproximateSizesFilesWithErrorMargin.
Old code running new test...
[ RUN ] DBTest.ApproximateSizesFilesWithErrorMargin
db/db_test.cc:1562: Failure
Expected: (size) <= (11 * 100), actual: 9478 vs 1100
Other tests updated to reflect consistent accounting of metadata.
Reviewed By: siying
Differential Revision: D21334706
Pulled By: pdillinger
fbshipit-source-id: 6f86870e45213334fedbe9c73b4ebb1d8d611185
5 years ago
|
|
|
uint64_t data_size = GetApproximateDataSize();
|
|
|
|
if (UNLIKELY(data_size == 0)) {
|
|
|
|
// Hmm. Let's just split in half to avoid skewing one way or another,
|
|
|
|
// since we don't know whether we're operating on lower bound or
|
|
|
|
// upper bound.
|
|
|
|
return rep_->file_size / 2;
|
|
|
|
}
|
|
|
|
|
|
|
|
BlockCacheLookupContext context(caller);
|
|
|
|
IndexBlockIter iiter_on_stack;
|
|
|
|
ReadOptions ro;
|
|
|
|
ro.total_order_seek = true;
|
|
|
|
auto index_iter =
|
|
|
|
NewIndexIterator(ro, /*disable_prefix_seek=*/true,
|
|
|
|
/*input_iter=*/&iiter_on_stack, /*get_context=*/nullptr,
|
|
|
|
/*lookup_context=*/&context);
|
|
|
|
std::unique_ptr<InternalIteratorBase<IndexValue>> iiter_unique_ptr;
|
|
|
|
if (index_iter != &iiter_on_stack) {
|
|
|
|
iiter_unique_ptr.reset(index_iter);
|
|
|
|
}
|
|
|
|
|
|
|
|
index_iter->Seek(key);
|
For ApproximateSizes, pro-rate table metadata size over data blocks (#6784)
Summary:
The implementation of GetApproximateSizes was inconsistent in
its treatment of the size of non-data blocks of SST files, sometimes
including and sometimes now. This was at its worst with large portion
of table file used by filters and querying a small range that crossed
a table boundary: the size estimate would include large filter size.
It's conceivable that someone might want only to know the size in terms
of data blocks, but I believe that's unlikely enough to ignore for now.
Similarly, there's no evidence the internal function AppoximateOffsetOf
is used for anything other than a one-sided ApproximateSize, so I intend
to refactor to remove redundancy in a follow-up commit.
So to fix this, GetApproximateSizes (and implementation details
ApproximateSize and ApproximateOffsetOf) now consistently include in
their returned sizes a portion of table file metadata (incl filters
and indexes) based on the size portion of the data blocks in range. In
other words, if a key range covers data blocks that are X% by size of all
the table's data blocks, returned approximate size is X% of the total
file size. It would technically be more accurate to attribute metadata
based on number of keys, but that's not computationally efficient with
data available and rarely a meaningful difference.
Also includes miscellaneous comment improvements / clarifications.
Also included is a new approximatesizerandom benchmark for db_bench.
No significant performance difference seen with this change, whether ~700 ops/sec with cache_index_and_filter_blocks and small cache or ~150k ops/sec without cache_index_and_filter_blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6784
Test Plan:
Test added to DBTest.ApproximateSizesFilesWithErrorMargin.
Old code running new test...
[ RUN ] DBTest.ApproximateSizesFilesWithErrorMargin
db/db_test.cc:1562: Failure
Expected: (size) <= (11 * 100), actual: 9478 vs 1100
Other tests updated to reflect consistent accounting of metadata.
Reviewed By: siying
Differential Revision: D21334706
Pulled By: pdillinger
fbshipit-source-id: 6f86870e45213334fedbe9c73b4ebb1d8d611185
5 years ago
|
|
|
|
|
|
|
uint64_t offset = ApproximateDataOffsetOf(*index_iter, data_size);
|
|
|
|
// Pro-rate file metadata (incl filters) size-proportionally across data
|
|
|
|
// blocks.
|
|
|
|
double size_ratio =
|
|
|
|
static_cast<double>(offset) / static_cast<double>(data_size);
|
|
|
|
return static_cast<uint64_t>(size_ratio *
|
|
|
|
static_cast<double>(rep_->file_size));
|
|
|
|
}
|
|
|
|
|
|
|
|
uint64_t BlockBasedTable::ApproximateSize(const Slice& start, const Slice& end,
|
|
|
|
TableReaderCaller caller) {
|
|
|
|
assert(rep_->internal_comparator.Compare(start, end) <= 0);
|
|
|
|
|
For ApproximateSizes, pro-rate table metadata size over data blocks (#6784)
Summary:
The implementation of GetApproximateSizes was inconsistent in
its treatment of the size of non-data blocks of SST files, sometimes
including and sometimes now. This was at its worst with large portion
of table file used by filters and querying a small range that crossed
a table boundary: the size estimate would include large filter size.
It's conceivable that someone might want only to know the size in terms
of data blocks, but I believe that's unlikely enough to ignore for now.
Similarly, there's no evidence the internal function AppoximateOffsetOf
is used for anything other than a one-sided ApproximateSize, so I intend
to refactor to remove redundancy in a follow-up commit.
So to fix this, GetApproximateSizes (and implementation details
ApproximateSize and ApproximateOffsetOf) now consistently include in
their returned sizes a portion of table file metadata (incl filters
and indexes) based on the size portion of the data blocks in range. In
other words, if a key range covers data blocks that are X% by size of all
the table's data blocks, returned approximate size is X% of the total
file size. It would technically be more accurate to attribute metadata
based on number of keys, but that's not computationally efficient with
data available and rarely a meaningful difference.
Also includes miscellaneous comment improvements / clarifications.
Also included is a new approximatesizerandom benchmark for db_bench.
No significant performance difference seen with this change, whether ~700 ops/sec with cache_index_and_filter_blocks and small cache or ~150k ops/sec without cache_index_and_filter_blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6784
Test Plan:
Test added to DBTest.ApproximateSizesFilesWithErrorMargin.
Old code running new test...
[ RUN ] DBTest.ApproximateSizesFilesWithErrorMargin
db/db_test.cc:1562: Failure
Expected: (size) <= (11 * 100), actual: 9478 vs 1100
Other tests updated to reflect consistent accounting of metadata.
Reviewed By: siying
Differential Revision: D21334706
Pulled By: pdillinger
fbshipit-source-id: 6f86870e45213334fedbe9c73b4ebb1d8d611185
5 years ago
|
|
|
uint64_t data_size = GetApproximateDataSize();
|
|
|
|
if (UNLIKELY(data_size == 0)) {
|
|
|
|
// Hmm. Assume whole file is involved, since we have lower and upper
|
|
|
|
// bound.
|
|
|
|
return rep_->file_size;
|
|
|
|
}
|
|
|
|
|
|
|
|
BlockCacheLookupContext context(caller);
|
|
|
|
IndexBlockIter iiter_on_stack;
|
|
|
|
ReadOptions ro;
|
|
|
|
ro.total_order_seek = true;
|
|
|
|
auto index_iter =
|
|
|
|
NewIndexIterator(ro, /*disable_prefix_seek=*/true,
|
|
|
|
/*input_iter=*/&iiter_on_stack, /*get_context=*/nullptr,
|
|
|
|
/*lookup_context=*/&context);
|
|
|
|
std::unique_ptr<InternalIteratorBase<IndexValue>> iiter_unique_ptr;
|
|
|
|
if (index_iter != &iiter_on_stack) {
|
|
|
|
iiter_unique_ptr.reset(index_iter);
|
|
|
|
}
|
|
|
|
|
|
|
|
index_iter->Seek(start);
|
For ApproximateSizes, pro-rate table metadata size over data blocks (#6784)
Summary:
The implementation of GetApproximateSizes was inconsistent in
its treatment of the size of non-data blocks of SST files, sometimes
including and sometimes now. This was at its worst with large portion
of table file used by filters and querying a small range that crossed
a table boundary: the size estimate would include large filter size.
It's conceivable that someone might want only to know the size in terms
of data blocks, but I believe that's unlikely enough to ignore for now.
Similarly, there's no evidence the internal function AppoximateOffsetOf
is used for anything other than a one-sided ApproximateSize, so I intend
to refactor to remove redundancy in a follow-up commit.
So to fix this, GetApproximateSizes (and implementation details
ApproximateSize and ApproximateOffsetOf) now consistently include in
their returned sizes a portion of table file metadata (incl filters
and indexes) based on the size portion of the data blocks in range. In
other words, if a key range covers data blocks that are X% by size of all
the table's data blocks, returned approximate size is X% of the total
file size. It would technically be more accurate to attribute metadata
based on number of keys, but that's not computationally efficient with
data available and rarely a meaningful difference.
Also includes miscellaneous comment improvements / clarifications.
Also included is a new approximatesizerandom benchmark for db_bench.
No significant performance difference seen with this change, whether ~700 ops/sec with cache_index_and_filter_blocks and small cache or ~150k ops/sec without cache_index_and_filter_blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6784
Test Plan:
Test added to DBTest.ApproximateSizesFilesWithErrorMargin.
Old code running new test...
[ RUN ] DBTest.ApproximateSizesFilesWithErrorMargin
db/db_test.cc:1562: Failure
Expected: (size) <= (11 * 100), actual: 9478 vs 1100
Other tests updated to reflect consistent accounting of metadata.
Reviewed By: siying
Differential Revision: D21334706
Pulled By: pdillinger
fbshipit-source-id: 6f86870e45213334fedbe9c73b4ebb1d8d611185
5 years ago
|
|
|
uint64_t start_offset = ApproximateDataOffsetOf(*index_iter, data_size);
|
|
|
|
index_iter->Seek(end);
|
For ApproximateSizes, pro-rate table metadata size over data blocks (#6784)
Summary:
The implementation of GetApproximateSizes was inconsistent in
its treatment of the size of non-data blocks of SST files, sometimes
including and sometimes now. This was at its worst with large portion
of table file used by filters and querying a small range that crossed
a table boundary: the size estimate would include large filter size.
It's conceivable that someone might want only to know the size in terms
of data blocks, but I believe that's unlikely enough to ignore for now.
Similarly, there's no evidence the internal function AppoximateOffsetOf
is used for anything other than a one-sided ApproximateSize, so I intend
to refactor to remove redundancy in a follow-up commit.
So to fix this, GetApproximateSizes (and implementation details
ApproximateSize and ApproximateOffsetOf) now consistently include in
their returned sizes a portion of table file metadata (incl filters
and indexes) based on the size portion of the data blocks in range. In
other words, if a key range covers data blocks that are X% by size of all
the table's data blocks, returned approximate size is X% of the total
file size. It would technically be more accurate to attribute metadata
based on number of keys, but that's not computationally efficient with
data available and rarely a meaningful difference.
Also includes miscellaneous comment improvements / clarifications.
Also included is a new approximatesizerandom benchmark for db_bench.
No significant performance difference seen with this change, whether ~700 ops/sec with cache_index_and_filter_blocks and small cache or ~150k ops/sec without cache_index_and_filter_blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6784
Test Plan:
Test added to DBTest.ApproximateSizesFilesWithErrorMargin.
Old code running new test...
[ RUN ] DBTest.ApproximateSizesFilesWithErrorMargin
db/db_test.cc:1562: Failure
Expected: (size) <= (11 * 100), actual: 9478 vs 1100
Other tests updated to reflect consistent accounting of metadata.
Reviewed By: siying
Differential Revision: D21334706
Pulled By: pdillinger
fbshipit-source-id: 6f86870e45213334fedbe9c73b4ebb1d8d611185
5 years ago
|
|
|
uint64_t end_offset = ApproximateDataOffsetOf(*index_iter, data_size);
|
|
|
|
|
|
|
|
assert(end_offset >= start_offset);
|
For ApproximateSizes, pro-rate table metadata size over data blocks (#6784)
Summary:
The implementation of GetApproximateSizes was inconsistent in
its treatment of the size of non-data blocks of SST files, sometimes
including and sometimes now. This was at its worst with large portion
of table file used by filters and querying a small range that crossed
a table boundary: the size estimate would include large filter size.
It's conceivable that someone might want only to know the size in terms
of data blocks, but I believe that's unlikely enough to ignore for now.
Similarly, there's no evidence the internal function AppoximateOffsetOf
is used for anything other than a one-sided ApproximateSize, so I intend
to refactor to remove redundancy in a follow-up commit.
So to fix this, GetApproximateSizes (and implementation details
ApproximateSize and ApproximateOffsetOf) now consistently include in
their returned sizes a portion of table file metadata (incl filters
and indexes) based on the size portion of the data blocks in range. In
other words, if a key range covers data blocks that are X% by size of all
the table's data blocks, returned approximate size is X% of the total
file size. It would technically be more accurate to attribute metadata
based on number of keys, but that's not computationally efficient with
data available and rarely a meaningful difference.
Also includes miscellaneous comment improvements / clarifications.
Also included is a new approximatesizerandom benchmark for db_bench.
No significant performance difference seen with this change, whether ~700 ops/sec with cache_index_and_filter_blocks and small cache or ~150k ops/sec without cache_index_and_filter_blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6784
Test Plan:
Test added to DBTest.ApproximateSizesFilesWithErrorMargin.
Old code running new test...
[ RUN ] DBTest.ApproximateSizesFilesWithErrorMargin
db/db_test.cc:1562: Failure
Expected: (size) <= (11 * 100), actual: 9478 vs 1100
Other tests updated to reflect consistent accounting of metadata.
Reviewed By: siying
Differential Revision: D21334706
Pulled By: pdillinger
fbshipit-source-id: 6f86870e45213334fedbe9c73b4ebb1d8d611185
5 years ago
|
|
|
// Pro-rate file metadata (incl filters) size-proportionally across data
|
|
|
|
// blocks.
|
|
|
|
double size_ratio = static_cast<double>(end_offset - start_offset) /
|
|
|
|
static_cast<double>(data_size);
|
|
|
|
return static_cast<uint64_t>(size_ratio *
|
|
|
|
static_cast<double>(rep_->file_size));
|
|
|
|
}
|
|
|
|
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
bool BlockBasedTable::TEST_FilterBlockInCache() const {
|
|
|
|
assert(rep_ != nullptr);
|
|
|
|
return TEST_BlockInCache(rep_->filter_handle);
|
|
|
|
}
|
|
|
|
|
Move the index readers out of the block cache (#5298)
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
6 years ago
|
|
|
bool BlockBasedTable::TEST_IndexBlockInCache() const {
|
|
|
|
assert(rep_ != nullptr);
|
|
|
|
|
|
|
|
return TEST_BlockInCache(rep_->footer.index_handle());
|
|
|
|
}
|
|
|
|
|
|
|
|
Status BlockBasedTable::GetKVPairsFromDataBlocks(
|
|
|
|
std::vector<KVPairBlock>* kv_pair_blocks) {
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
std::unique_ptr<InternalIteratorBase<IndexValue>> blockhandles_iter(
|
|
|
|
NewIndexIterator(ReadOptions(), /*need_upper_bound_check=*/false,
|
|
|
|
/*input_iter=*/nullptr, /*get_context=*/nullptr,
|
|
|
|
/*lookup_contex=*/nullptr));
|
|
|
|
|
|
|
|
Status s = blockhandles_iter->status();
|
|
|
|
if (!s.ok()) {
|
|
|
|
// Cannot read Index Block
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (blockhandles_iter->SeekToFirst(); blockhandles_iter->Valid();
|
|
|
|
blockhandles_iter->Next()) {
|
|
|
|
s = blockhandles_iter->status();
|
|
|
|
|
|
|
|
if (!s.ok()) {
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
std::unique_ptr<InternalIterator> datablock_iter;
|
|
|
|
datablock_iter.reset(NewDataBlockIterator<DataBlockIter>(
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
ReadOptions(), blockhandles_iter->value().handle,
|
|
|
|
/*input_iter=*/nullptr, /*type=*/BlockType::kData,
|
|
|
|
/*get_context=*/nullptr, /*lookup_context=*/nullptr, Status(),
|
|
|
|
/*prefetch_buffer=*/nullptr));
|
|
|
|
s = datablock_iter->status();
|
|
|
|
|
|
|
|
if (!s.ok()) {
|
|
|
|
// Error reading the block - Skipped
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
KVPairBlock kv_pair_block;
|
|
|
|
for (datablock_iter->SeekToFirst(); datablock_iter->Valid();
|
|
|
|
datablock_iter->Next()) {
|
|
|
|
s = datablock_iter->status();
|
|
|
|
if (!s.ok()) {
|
|
|
|
// Error reading the block - Skipped
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
const Slice& key = datablock_iter->key();
|
|
|
|
const Slice& value = datablock_iter->value();
|
|
|
|
std::string key_copy = std::string(key.data(), key.size());
|
|
|
|
std::string value_copy = std::string(value.data(), value.size());
|
|
|
|
|
|
|
|
kv_pair_block.push_back(
|
|
|
|
std::make_pair(std::move(key_copy), std::move(value_copy)));
|
|
|
|
}
|
|
|
|
kv_pair_blocks->push_back(std::move(kv_pair_block));
|
|
|
|
}
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
Status BlockBasedTable::DumpTable(WritableFile* out_file) {
|
|
|
|
WritableFileStringStreamAdapter out_file_wrapper(out_file);
|
|
|
|
std::ostream out_stream(&out_file_wrapper);
|
|
|
|
// Output Footer
|
|
|
|
out_stream << "Footer Details:\n"
|
|
|
|
"--------------------------------------\n";
|
|
|
|
out_stream << " " << rep_->footer.ToString() << "\n";
|
|
|
|
|
|
|
|
// Output MetaIndex
|
|
|
|
out_stream << "Metaindex Details:\n"
|
|
|
|
"--------------------------------------\n";
|
|
|
|
std::unique_ptr<Block> metaindex;
|
|
|
|
std::unique_ptr<InternalIterator> metaindex_iter;
|
|
|
|
ReadOptions ro;
|
|
|
|
Status s = ReadMetaIndexBlock(ro, nullptr /* prefetch_buffer */, &metaindex,
|
|
|
|
&metaindex_iter);
|
|
|
|
if (s.ok()) {
|
|
|
|
for (metaindex_iter->SeekToFirst(); metaindex_iter->Valid();
|
|
|
|
metaindex_iter->Next()) {
|
|
|
|
s = metaindex_iter->status();
|
|
|
|
if (!s.ok()) {
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
if (metaindex_iter->key() == kPropertiesBlock) {
|
|
|
|
out_stream << " Properties block handle: "
|
|
|
|
<< metaindex_iter->value().ToString(true) << "\n";
|
|
|
|
} else if (metaindex_iter->key() == kCompressionDictBlock) {
|
|
|
|
out_stream << " Compression dictionary block handle: "
|
|
|
|
<< metaindex_iter->value().ToString(true) << "\n";
|
|
|
|
} else if (strstr(metaindex_iter->key().ToString().c_str(),
|
|
|
|
"filter.rocksdb.") != nullptr) {
|
|
|
|
out_stream << " Filter block handle: "
|
|
|
|
<< metaindex_iter->value().ToString(true) << "\n";
|
|
|
|
} else if (metaindex_iter->key() == kRangeDelBlock) {
|
|
|
|
out_stream << " Range deletion block handle: "
|
|
|
|
<< metaindex_iter->value().ToString(true) << "\n";
|
|
|
|
}
|
|
|
|
}
|
|
|
|
out_stream << "\n";
|
|
|
|
} else {
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Output TableProperties
|
|
|
|
const ROCKSDB_NAMESPACE::TableProperties* table_properties;
|
|
|
|
table_properties = rep_->table_properties.get();
|
|
|
|
|
|
|
|
if (table_properties != nullptr) {
|
|
|
|
out_stream << "Table Properties:\n"
|
|
|
|
"--------------------------------------\n";
|
|
|
|
out_stream << " " << table_properties->ToString("\n ", ": ") << "\n";
|
|
|
|
}
|
Move the filter readers out of the block cache (#5504)
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
5 years ago
|
|
|
|
|
|
|
if (rep_->filter) {
|
|
|
|
out_stream << "Filter Details:\n"
|
|
|
|
"--------------------------------------\n";
|
|
|
|
out_stream << " " << rep_->filter->ToString() << "\n";
|
|
|
|
}
|
|
|
|
|
|
|
|
// Output Index block
|
|
|
|
s = DumpIndexBlock(out_stream);
|
|
|
|
if (!s.ok()) {
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Output compression dictionary
|
|
|
|
if (rep_->uncompression_dict_reader) {
|
|
|
|
CachableEntry<UncompressionDict> uncompression_dict;
|
|
|
|
s = rep_->uncompression_dict_reader->GetOrReadUncompressionDictionary(
|
|
|
|
nullptr /* prefetch_buffer */, false /* no_io */,
|
|
|
|
nullptr /* get_context */, nullptr /* lookup_context */,
|
|
|
|
&uncompression_dict);
|
|
|
|
if (!s.ok()) {
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
assert(uncompression_dict.GetValue());
|
|
|
|
|
|
|
|
const Slice& raw_dict = uncompression_dict.GetValue()->GetRawDict();
|
|
|
|
out_stream << "Compression Dictionary:\n"
|
|
|
|
"--------------------------------------\n";
|
|
|
|
out_stream << " size (bytes): " << raw_dict.size() << "\n\n";
|
|
|
|
out_stream << " HEX " << raw_dict.ToString(true) << "\n\n";
|
|
|
|
}
|
|
|
|
|
|
|
|
// Output range deletions block
|
|
|
|
auto* range_del_iter = NewRangeTombstoneIterator(ReadOptions());
|
|
|
|
if (range_del_iter != nullptr) {
|
|
|
|
range_del_iter->SeekToFirst();
|
|
|
|
if (range_del_iter->Valid()) {
|
|
|
|
out_stream << "Range deletions:\n"
|
|
|
|
"--------------------------------------\n";
|
|
|
|
for (; range_del_iter->Valid(); range_del_iter->Next()) {
|
|
|
|
DumpKeyValue(range_del_iter->key(), range_del_iter->value(),
|
|
|
|
out_stream);
|
|
|
|
}
|
|
|
|
out_stream << "\n";
|
|
|
|
}
|
|
|
|
delete range_del_iter;
|
|
|
|
}
|
|
|
|
// Output Data blocks
|
|
|
|
s = DumpDataBlocks(out_stream);
|
|
|
|
|
|
|
|
if (!s.ok()) {
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!out_stream.good()) {
|
|
|
|
return Status::IOError("Failed to write to output file");
|
|
|
|
}
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
|
|
|
Status BlockBasedTable::DumpIndexBlock(std::ostream& out_stream) {
|
|
|
|
out_stream << "Index Details:\n"
|
|
|
|
"--------------------------------------\n";
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
std::unique_ptr<InternalIteratorBase<IndexValue>> blockhandles_iter(
|
|
|
|
NewIndexIterator(ReadOptions(), /*need_upper_bound_check=*/false,
|
|
|
|
/*input_iter=*/nullptr, /*get_context=*/nullptr,
|
|
|
|
/*lookup_contex=*/nullptr));
|
|
|
|
Status s = blockhandles_iter->status();
|
|
|
|
if (!s.ok()) {
|
|
|
|
out_stream << "Can not read Index Block \n\n";
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
out_stream << " Block key hex dump: Data block handle\n";
|
|
|
|
out_stream << " Block key ascii\n\n";
|
|
|
|
for (blockhandles_iter->SeekToFirst(); blockhandles_iter->Valid();
|
|
|
|
blockhandles_iter->Next()) {
|
|
|
|
s = blockhandles_iter->status();
|
|
|
|
if (!s.ok()) {
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
Slice key = blockhandles_iter->key();
|
|
|
|
Slice user_key;
|
|
|
|
InternalKey ikey;
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
if (!rep_->index_key_includes_seq) {
|
|
|
|
user_key = key;
|
|
|
|
} else {
|
|
|
|
ikey.DecodeFrom(key);
|
|
|
|
user_key = ikey.user_key();
|
|
|
|
}
|
|
|
|
|
|
|
|
out_stream << " HEX " << user_key.ToString(true) << ": "
|
|
|
|
<< blockhandles_iter->value().ToString(true,
|
|
|
|
rep_->index_has_first_key)
|
|
|
|
<< "\n";
|
|
|
|
|
|
|
|
std::string str_key = user_key.ToString();
|
|
|
|
std::string res_key("");
|
|
|
|
char cspace = ' ';
|
|
|
|
for (size_t i = 0; i < str_key.size(); i++) {
|
|
|
|
res_key.append(&str_key[i], 1);
|
|
|
|
res_key.append(1, cspace);
|
|
|
|
}
|
|
|
|
out_stream << " ASCII " << res_key << "\n";
|
|
|
|
out_stream << " ------\n";
|
|
|
|
}
|
|
|
|
out_stream << "\n";
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
|
|
|
Status BlockBasedTable::DumpDataBlocks(std::ostream& out_stream) {
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
std::unique_ptr<InternalIteratorBase<IndexValue>> blockhandles_iter(
|
|
|
|
NewIndexIterator(ReadOptions(), /*need_upper_bound_check=*/false,
|
|
|
|
/*input_iter=*/nullptr, /*get_context=*/nullptr,
|
|
|
|
/*lookup_contex=*/nullptr));
|
|
|
|
Status s = blockhandles_iter->status();
|
|
|
|
if (!s.ok()) {
|
|
|
|
out_stream << "Can not read Index Block \n\n";
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
uint64_t datablock_size_min = std::numeric_limits<uint64_t>::max();
|
|
|
|
uint64_t datablock_size_max = 0;
|
|
|
|
uint64_t datablock_size_sum = 0;
|
|
|
|
|
|
|
|
size_t block_id = 1;
|
|
|
|
for (blockhandles_iter->SeekToFirst(); blockhandles_iter->Valid();
|
|
|
|
block_id++, blockhandles_iter->Next()) {
|
|
|
|
s = blockhandles_iter->status();
|
|
|
|
if (!s.ok()) {
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
BlockHandle bh = blockhandles_iter->value().handle;
|
|
|
|
uint64_t datablock_size = bh.size();
|
|
|
|
datablock_size_min = std::min(datablock_size_min, datablock_size);
|
|
|
|
datablock_size_max = std::max(datablock_size_max, datablock_size);
|
|
|
|
datablock_size_sum += datablock_size;
|
|
|
|
|
|
|
|
out_stream << "Data Block # " << block_id << " @ "
|
|
|
|
<< blockhandles_iter->value().handle.ToString(true) << "\n";
|
|
|
|
out_stream << "--------------------------------------\n";
|
|
|
|
|
|
|
|
std::unique_ptr<InternalIterator> datablock_iter;
|
|
|
|
datablock_iter.reset(NewDataBlockIterator<DataBlockIter>(
|
Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
5 years ago
|
|
|
ReadOptions(), blockhandles_iter->value().handle,
|
|
|
|
/*input_iter=*/nullptr, /*type=*/BlockType::kData,
|
|
|
|
/*get_context=*/nullptr, /*lookup_context=*/nullptr, Status(),
|
|
|
|
/*prefetch_buffer=*/nullptr));
|
|
|
|
s = datablock_iter->status();
|
|
|
|
|
|
|
|
if (!s.ok()) {
|
|
|
|
out_stream << "Error reading the block - Skipped \n\n";
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (datablock_iter->SeekToFirst(); datablock_iter->Valid();
|
|
|
|
datablock_iter->Next()) {
|
|
|
|
s = datablock_iter->status();
|
|
|
|
if (!s.ok()) {
|
|
|
|
out_stream << "Error reading the block - Skipped \n";
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
DumpKeyValue(datablock_iter->key(), datablock_iter->value(), out_stream);
|
|
|
|
}
|
|
|
|
out_stream << "\n";
|
|
|
|
}
|
|
|
|
|
|
|
|
uint64_t num_datablocks = block_id - 1;
|
|
|
|
if (num_datablocks) {
|
|
|
|
double datablock_size_avg =
|
|
|
|
static_cast<double>(datablock_size_sum) / num_datablocks;
|
|
|
|
out_stream << "Data Block Summary:\n";
|
|
|
|
out_stream << "--------------------------------------\n";
|
|
|
|
out_stream << " # data blocks: " << num_datablocks << "\n";
|
|
|
|
out_stream << " min data block size: " << datablock_size_min << "\n";
|
|
|
|
out_stream << " max data block size: " << datablock_size_max << "\n";
|
|
|
|
out_stream << " avg data block size: " << ToString(datablock_size_avg)
|
|
|
|
<< "\n";
|
|
|
|
}
|
|
|
|
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
|
|
|
void BlockBasedTable::DumpKeyValue(const Slice& key, const Slice& value,
|
|
|
|
std::ostream& out_stream) {
|
|
|
|
InternalKey ikey;
|
|
|
|
ikey.DecodeFrom(key);
|
|
|
|
|
|
|
|
out_stream << " HEX " << ikey.user_key().ToString(true) << ": "
|
|
|
|
<< value.ToString(true) << "\n";
|
|
|
|
|
|
|
|
std::string str_key = ikey.user_key().ToString();
|
|
|
|
std::string str_value = value.ToString();
|
|
|
|
std::string res_key(""), res_value("");
|
|
|
|
char cspace = ' ';
|
|
|
|
for (size_t i = 0; i < str_key.size(); i++) {
|
|
|
|
if (str_key[i] == '\0') {
|
|
|
|
res_key.append("\\0", 2);
|
|
|
|
} else {
|
|
|
|
res_key.append(&str_key[i], 1);
|
|
|
|
}
|
|
|
|
res_key.append(1, cspace);
|
|
|
|
}
|
|
|
|
for (size_t i = 0; i < str_value.size(); i++) {
|
|
|
|
if (str_value[i] == '\0') {
|
|
|
|
res_value.append("\\0", 2);
|
|
|
|
} else {
|
|
|
|
res_value.append(&str_value[i], 1);
|
|
|
|
}
|
|
|
|
res_value.append(1, cspace);
|
|
|
|
}
|
|
|
|
|
|
|
|
out_stream << " ASCII " << res_key << ": " << res_value << "\n";
|
|
|
|
out_stream << " ------\n";
|
|
|
|
}
|
|
|
|
|
|
|
|
} // namespace ROCKSDB_NAMESPACE
|