You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
rocksdb/Makefile

1182 lines
38 KiB

# Copyright (c) 2011 The LevelDB Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file. See the AUTHORS file for names of contributors.
# Inherit some settings from environment variables, if available
#-----------------------------------------------
run 'make check's rules (and even subtests) in parallel Summary: When GNU parallel is available, "make check" tests are now run in parallel. When /dev/shm is usable, we tell those tests to create temporary files therein. Now, the longest-running single test, db_test, (which is composed of hundreds of sub-tests) is no longer run sequentially: instead, each of its sub-tests is run independently, and can be parallelized along with all other tests. To make that process easier, this change creates a temporary directory, "t/", in which it puts a small script for each of those subtests. The output from each parallel-run test is now saved in t/log-TEST_NAME. When GNU parallel is not available, we run the tests in sequence, just as before. If GNU parallel is available and you don't like the default of running one subtest per core, you can invoke "make J=1 check" to run only one test at a time. Beware: this will take a long time, and it starts with the two longest-running tests, so you will wait for a long time before seeing any results. Instead, if you want to use fewer resources but still see useful progress, try "make J=60% check". That will attempt to ensure that 60% of the cores are occupied by test runs. To watch progress of individual tests (duration, success (PASS-or-FAIL), name), run "make watch-log" in the same directory from another window. That will start with something like this: and when complete should show numbers/names like this: Every 0.1s: sort -k7,7nr -k4,4gr LOG|perl -n -e '@a=split("\t",$_,-1); $t=$a[8]; $t =~ s,^\./,,;' -e '$t =~ s, >.*,,; chomp $t;' -e '$t =~ /.*--gtest_filter=... Wed Apr 1 10:51:42 2015 152.221 PASS t/DBTest.FileCreationRandomFailure 109.280 PASS t/DBTest.EncodeDecompressedBlockSizeTest 82.315 PASS reduce_levels_test 77.812 PASS t/DBTest.CompactionFilterWithValueChange 73.236 PASS backupable_db_test 63.428 PASS deletefile_test 57.248 PASS table_test 55.665 PASS prefix_test 49.816 PASS t/DBTest.RateLimitingTest ... Test Plan: Timings (measured so as to exclude compile and link times): With this change, all tests complete in 2m40s on a system for which nproc prints 32. Prior to this this change, "make check" would take 24.5 minutes on that same system. Here are durations (in seconds) of the longest-running subtests: 152.435 PASS t/DBTest.FileCreationRandomFailure 107.070 PASS t/DBTest.EncodeDecompressedBlockSizeTest 81.391 PASS ./reduce_levels_test 71.587 PASS ./backupable_db_test 61.746 PASS ./deletefile_test 57.960 PASS ./table_test 55.230 PASS ./prefix_test 54.060 PASS t/DBTest.CompactionFilterWithValueChange 48.873 PASS t/DBTest.RateLimitingTest 47.569 PASS ./fault_injection_test 46.593 PASS t/DBTest.Randomized 42.662 PASS t/DBTest.CompactionFilter 31.793 PASS t/DBTest.SparseMerge 30.612 PASS t/DBTest.CompactionFilterV2 25.891 PASS t/DBTest.GroupCommitTest 23.863 PASS t/DBTest.DynamicLevelMaxBytesBase 22.976 PASS ./rate_limiter_test 18.942 PASS t/DBTest.OptimizeFiltersForHits 16.851 PASS ./env_test 15.399 PASS t/DBTest.CompactionFilterV2WithValueChange 14.827 PASS t/DBTest.CompactionFilterV2NULLPrefix Reviewers: igor, sdong, rven, yhchiang, igor.sugak Reviewed By: igor.sugak Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D35379
10 years ago
CLEAN_FILES = # deliberately empty, so we can append below.
CFLAGS += ${EXTRA_CFLAGS}
CXXFLAGS += ${EXTRA_CXXFLAGS}
LDFLAGS += $(EXTRA_LDFLAGS)
MACHINE ?= $(shell uname -m)
ARFLAGS = rs
run 'make check's rules (and even subtests) in parallel Summary: When GNU parallel is available, "make check" tests are now run in parallel. When /dev/shm is usable, we tell those tests to create temporary files therein. Now, the longest-running single test, db_test, (which is composed of hundreds of sub-tests) is no longer run sequentially: instead, each of its sub-tests is run independently, and can be parallelized along with all other tests. To make that process easier, this change creates a temporary directory, "t/", in which it puts a small script for each of those subtests. The output from each parallel-run test is now saved in t/log-TEST_NAME. When GNU parallel is not available, we run the tests in sequence, just as before. If GNU parallel is available and you don't like the default of running one subtest per core, you can invoke "make J=1 check" to run only one test at a time. Beware: this will take a long time, and it starts with the two longest-running tests, so you will wait for a long time before seeing any results. Instead, if you want to use fewer resources but still see useful progress, try "make J=60% check". That will attempt to ensure that 60% of the cores are occupied by test runs. To watch progress of individual tests (duration, success (PASS-or-FAIL), name), run "make watch-log" in the same directory from another window. That will start with something like this: and when complete should show numbers/names like this: Every 0.1s: sort -k7,7nr -k4,4gr LOG|perl -n -e '@a=split("\t",$_,-1); $t=$a[8]; $t =~ s,^\./,,;' -e '$t =~ s, >.*,,; chomp $t;' -e '$t =~ /.*--gtest_filter=... Wed Apr 1 10:51:42 2015 152.221 PASS t/DBTest.FileCreationRandomFailure 109.280 PASS t/DBTest.EncodeDecompressedBlockSizeTest 82.315 PASS reduce_levels_test 77.812 PASS t/DBTest.CompactionFilterWithValueChange 73.236 PASS backupable_db_test 63.428 PASS deletefile_test 57.248 PASS table_test 55.665 PASS prefix_test 49.816 PASS t/DBTest.RateLimitingTest ... Test Plan: Timings (measured so as to exclude compile and link times): With this change, all tests complete in 2m40s on a system for which nproc prints 32. Prior to this this change, "make check" would take 24.5 minutes on that same system. Here are durations (in seconds) of the longest-running subtests: 152.435 PASS t/DBTest.FileCreationRandomFailure 107.070 PASS t/DBTest.EncodeDecompressedBlockSizeTest 81.391 PASS ./reduce_levels_test 71.587 PASS ./backupable_db_test 61.746 PASS ./deletefile_test 57.960 PASS ./table_test 55.230 PASS ./prefix_test 54.060 PASS t/DBTest.CompactionFilterWithValueChange 48.873 PASS t/DBTest.RateLimitingTest 47.569 PASS ./fault_injection_test 46.593 PASS t/DBTest.Randomized 42.662 PASS t/DBTest.CompactionFilter 31.793 PASS t/DBTest.SparseMerge 30.612 PASS t/DBTest.CompactionFilterV2 25.891 PASS t/DBTest.GroupCommitTest 23.863 PASS t/DBTest.DynamicLevelMaxBytesBase 22.976 PASS ./rate_limiter_test 18.942 PASS t/DBTest.OptimizeFiltersForHits 16.851 PASS ./env_test 15.399 PASS t/DBTest.CompactionFilterV2WithValueChange 14.827 PASS t/DBTest.CompactionFilterV2NULLPrefix Reviewers: igor, sdong, rven, yhchiang, igor.sugak Reviewed By: igor.sugak Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D35379
10 years ago
# Transform parallel LOG output into something more readable.
perl_command = perl -n \
-e '@a=split("\t",$$_,-1); $$t=$$a[8]; $$t =~ s,^\./,,;' \
-e '$$t =~ s, >.*,,; chomp $$t;' \
-e '$$t =~ /.*--gtest_filter=(.*?\.[\w\/]+)/ and $$t=$$1;' \
-e 'printf "%7.3f %s %s\n", $$a[3], $$a[6] == 0 ? "PASS" : "FAIL", $$t'
run 'make check's rules (and even subtests) in parallel Summary: When GNU parallel is available, "make check" tests are now run in parallel. When /dev/shm is usable, we tell those tests to create temporary files therein. Now, the longest-running single test, db_test, (which is composed of hundreds of sub-tests) is no longer run sequentially: instead, each of its sub-tests is run independently, and can be parallelized along with all other tests. To make that process easier, this change creates a temporary directory, "t/", in which it puts a small script for each of those subtests. The output from each parallel-run test is now saved in t/log-TEST_NAME. When GNU parallel is not available, we run the tests in sequence, just as before. If GNU parallel is available and you don't like the default of running one subtest per core, you can invoke "make J=1 check" to run only one test at a time. Beware: this will take a long time, and it starts with the two longest-running tests, so you will wait for a long time before seeing any results. Instead, if you want to use fewer resources but still see useful progress, try "make J=60% check". That will attempt to ensure that 60% of the cores are occupied by test runs. To watch progress of individual tests (duration, success (PASS-or-FAIL), name), run "make watch-log" in the same directory from another window. That will start with something like this: and when complete should show numbers/names like this: Every 0.1s: sort -k7,7nr -k4,4gr LOG|perl -n -e '@a=split("\t",$_,-1); $t=$a[8]; $t =~ s,^\./,,;' -e '$t =~ s, >.*,,; chomp $t;' -e '$t =~ /.*--gtest_filter=... Wed Apr 1 10:51:42 2015 152.221 PASS t/DBTest.FileCreationRandomFailure 109.280 PASS t/DBTest.EncodeDecompressedBlockSizeTest 82.315 PASS reduce_levels_test 77.812 PASS t/DBTest.CompactionFilterWithValueChange 73.236 PASS backupable_db_test 63.428 PASS deletefile_test 57.248 PASS table_test 55.665 PASS prefix_test 49.816 PASS t/DBTest.RateLimitingTest ... Test Plan: Timings (measured so as to exclude compile and link times): With this change, all tests complete in 2m40s on a system for which nproc prints 32. Prior to this this change, "make check" would take 24.5 minutes on that same system. Here are durations (in seconds) of the longest-running subtests: 152.435 PASS t/DBTest.FileCreationRandomFailure 107.070 PASS t/DBTest.EncodeDecompressedBlockSizeTest 81.391 PASS ./reduce_levels_test 71.587 PASS ./backupable_db_test 61.746 PASS ./deletefile_test 57.960 PASS ./table_test 55.230 PASS ./prefix_test 54.060 PASS t/DBTest.CompactionFilterWithValueChange 48.873 PASS t/DBTest.RateLimitingTest 47.569 PASS ./fault_injection_test 46.593 PASS t/DBTest.Randomized 42.662 PASS t/DBTest.CompactionFilter 31.793 PASS t/DBTest.SparseMerge 30.612 PASS t/DBTest.CompactionFilterV2 25.891 PASS t/DBTest.GroupCommitTest 23.863 PASS t/DBTest.DynamicLevelMaxBytesBase 22.976 PASS ./rate_limiter_test 18.942 PASS t/DBTest.OptimizeFiltersForHits 16.851 PASS ./env_test 15.399 PASS t/DBTest.CompactionFilterV2WithValueChange 14.827 PASS t/DBTest.CompactionFilterV2NULLPrefix Reviewers: igor, sdong, rven, yhchiang, igor.sugak Reviewed By: igor.sugak Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D35379
10 years ago
quoted_perl_command = $(subst ','\'',$(perl_command))
Don't treat warnings as error when building release Summary: This will reduce errors reported by open source by 90%. Developers should have warnings break their compile. Users shouldn't. Test Plan: make dbg: g++ -g -W -Wextra -Wall -Wsign-compare -Wshadow -Wno-unused-parameter -Werror -I. -I./include -std=c++11 -DROCKSDB_PLATFORM_POSIX -DOS_LINUX -fno-builtin-memcmp -DROCKSDB_FALLOCATE_PRESENT -DSNAPPY -DGFLAGS=gflags -DZLIB -DBZIP2 -march=native -isystem ./third-party/gtest-1.7.0/fused-src -Woverloaded-virtual -Wn on-virtual-dtor -Wno-missing-field-initializers -c db/repair.cc -o db/repair.o make all: g++ -g -W -Wextra -Wall -Wsign-compare -Wshadow -Wno-unused-parameter -Werror -I. -I./include -std=c++11 -DROCKSDB_PLATFORM_POSIX -DOS_LINUX -fno-builtin-memcmp -DROCKSDB_FALLOCATE_PRESENT -DSNAPPY -DGFLAGS=gflags -DZLIB -DBZIP2 -march=native -isystem ./third-party/gtest-1.7.0/fused-src -O2 -fno-omit-frame-pointer -momit-leaf-frame-pointer -Woverloaded-virtual -Wnon-virtual-dtor -Wno-missing-field-initializers -c db/repair.cc -o db/repair.o make static_lib: g++ -g -W -Wextra -Wall -Wsign-compare -Wshadow -Wno-unused-parameter -I. -I./include -std=c++11 -DROCKSDB_PLATFORM_POSIX -DOS_LINUX -fno-builtin-memcmp -DROCKSDB_FALLOCATE_PRESENT -DSNAPPY -DGFLAGS=gflags -DZLIB -DBZIP2 -march=native -isystem ./third-party/gtest-1.7.0/fused-src -O2 -fno-omit-frame-pointer -momit-leaf-frame-pointer -DNDEBUG -Woverloaded-virtual -Wnon-virtual-dtor -Wno-missing-field-initializers -c db/repair.cc -o db/repair.o Reviewers: sdong, yhchiang, rven Reviewed By: rven Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D38031
10 years ago
# DEBUG_LEVEL can have three values:
# * DEBUG_LEVEL=2; this is the ultimate debug mode. It will compile rocksdb
# without any optimizations. To compile with level 2, issue `make dbg`
# * DEBUG_LEVEL=1; debug level 1 enables all assertions and debug code, but
# compiles rocksdb with -O2 optimizations. this is the default debug level.
# `make all` or `make <binary_target>` compile RocksDB with debug level 1.
# We use this debug level when developing RocksDB.
# * DEBUG_LEVEL=0; this is the debug level we use for release. If you're
# running rocksdb in production you most definitely want to compile RocksDB
# with debug level 0. To compile with level 0, run `make shared_lib`,
Don't treat warnings as error when building release Summary: This will reduce errors reported by open source by 90%. Developers should have warnings break their compile. Users shouldn't. Test Plan: make dbg: g++ -g -W -Wextra -Wall -Wsign-compare -Wshadow -Wno-unused-parameter -Werror -I. -I./include -std=c++11 -DROCKSDB_PLATFORM_POSIX -DOS_LINUX -fno-builtin-memcmp -DROCKSDB_FALLOCATE_PRESENT -DSNAPPY -DGFLAGS=gflags -DZLIB -DBZIP2 -march=native -isystem ./third-party/gtest-1.7.0/fused-src -Woverloaded-virtual -Wn on-virtual-dtor -Wno-missing-field-initializers -c db/repair.cc -o db/repair.o make all: g++ -g -W -Wextra -Wall -Wsign-compare -Wshadow -Wno-unused-parameter -Werror -I. -I./include -std=c++11 -DROCKSDB_PLATFORM_POSIX -DOS_LINUX -fno-builtin-memcmp -DROCKSDB_FALLOCATE_PRESENT -DSNAPPY -DGFLAGS=gflags -DZLIB -DBZIP2 -march=native -isystem ./third-party/gtest-1.7.0/fused-src -O2 -fno-omit-frame-pointer -momit-leaf-frame-pointer -Woverloaded-virtual -Wnon-virtual-dtor -Wno-missing-field-initializers -c db/repair.cc -o db/repair.o make static_lib: g++ -g -W -Wextra -Wall -Wsign-compare -Wshadow -Wno-unused-parameter -I. -I./include -std=c++11 -DROCKSDB_PLATFORM_POSIX -DOS_LINUX -fno-builtin-memcmp -DROCKSDB_FALLOCATE_PRESENT -DSNAPPY -DGFLAGS=gflags -DZLIB -DBZIP2 -march=native -isystem ./third-party/gtest-1.7.0/fused-src -O2 -fno-omit-frame-pointer -momit-leaf-frame-pointer -DNDEBUG -Woverloaded-virtual -Wnon-virtual-dtor -Wno-missing-field-initializers -c db/repair.cc -o db/repair.o Reviewers: sdong, yhchiang, rven Reviewed By: rven Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D38031
10 years ago
# `make install-shared`, `make static_lib`, `make install-static` or
# `make install`
DEBUG_LEVEL=1
ifeq ($(MAKECMDGOALS),dbg)
DEBUG_LEVEL=2
endif
ifeq ($(MAKECMDGOALS),shared_lib)
DEBUG_LEVEL=0
endif
ifeq ($(MAKECMDGOALS),install-shared)
DEBUG_LEVEL=0
endif
ifeq ($(MAKECMDGOALS),static_lib)
DEBUG_LEVEL=0
endif
ifeq ($(MAKECMDGOALS),install-static)
DEBUG_LEVEL=0
endif
ifeq ($(MAKECMDGOALS),install)
DEBUG_LEVEL=0
Don't treat warnings as error when building release Summary: This will reduce errors reported by open source by 90%. Developers should have warnings break their compile. Users shouldn't. Test Plan: make dbg: g++ -g -W -Wextra -Wall -Wsign-compare -Wshadow -Wno-unused-parameter -Werror -I. -I./include -std=c++11 -DROCKSDB_PLATFORM_POSIX -DOS_LINUX -fno-builtin-memcmp -DROCKSDB_FALLOCATE_PRESENT -DSNAPPY -DGFLAGS=gflags -DZLIB -DBZIP2 -march=native -isystem ./third-party/gtest-1.7.0/fused-src -Woverloaded-virtual -Wn on-virtual-dtor -Wno-missing-field-initializers -c db/repair.cc -o db/repair.o make all: g++ -g -W -Wextra -Wall -Wsign-compare -Wshadow -Wno-unused-parameter -Werror -I. -I./include -std=c++11 -DROCKSDB_PLATFORM_POSIX -DOS_LINUX -fno-builtin-memcmp -DROCKSDB_FALLOCATE_PRESENT -DSNAPPY -DGFLAGS=gflags -DZLIB -DBZIP2 -march=native -isystem ./third-party/gtest-1.7.0/fused-src -O2 -fno-omit-frame-pointer -momit-leaf-frame-pointer -Woverloaded-virtual -Wnon-virtual-dtor -Wno-missing-field-initializers -c db/repair.cc -o db/repair.o make static_lib: g++ -g -W -Wextra -Wall -Wsign-compare -Wshadow -Wno-unused-parameter -I. -I./include -std=c++11 -DROCKSDB_PLATFORM_POSIX -DOS_LINUX -fno-builtin-memcmp -DROCKSDB_FALLOCATE_PRESENT -DSNAPPY -DGFLAGS=gflags -DZLIB -DBZIP2 -march=native -isystem ./third-party/gtest-1.7.0/fused-src -O2 -fno-omit-frame-pointer -momit-leaf-frame-pointer -DNDEBUG -Woverloaded-virtual -Wnon-virtual-dtor -Wno-missing-field-initializers -c db/repair.cc -o db/repair.o Reviewers: sdong, yhchiang, rven Reviewed By: rven Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D38031
10 years ago
endif
ifeq ($(MAKECMDGOALS),rocksdbjavastatic)
DEBUG_LEVEL=0
endif
Don't treat warnings as error when building release Summary: This will reduce errors reported by open source by 90%. Developers should have warnings break their compile. Users shouldn't. Test Plan: make dbg: g++ -g -W -Wextra -Wall -Wsign-compare -Wshadow -Wno-unused-parameter -Werror -I. -I./include -std=c++11 -DROCKSDB_PLATFORM_POSIX -DOS_LINUX -fno-builtin-memcmp -DROCKSDB_FALLOCATE_PRESENT -DSNAPPY -DGFLAGS=gflags -DZLIB -DBZIP2 -march=native -isystem ./third-party/gtest-1.7.0/fused-src -Woverloaded-virtual -Wn on-virtual-dtor -Wno-missing-field-initializers -c db/repair.cc -o db/repair.o make all: g++ -g -W -Wextra -Wall -Wsign-compare -Wshadow -Wno-unused-parameter -Werror -I. -I./include -std=c++11 -DROCKSDB_PLATFORM_POSIX -DOS_LINUX -fno-builtin-memcmp -DROCKSDB_FALLOCATE_PRESENT -DSNAPPY -DGFLAGS=gflags -DZLIB -DBZIP2 -march=native -isystem ./third-party/gtest-1.7.0/fused-src -O2 -fno-omit-frame-pointer -momit-leaf-frame-pointer -Woverloaded-virtual -Wnon-virtual-dtor -Wno-missing-field-initializers -c db/repair.cc -o db/repair.o make static_lib: g++ -g -W -Wextra -Wall -Wsign-compare -Wshadow -Wno-unused-parameter -I. -I./include -std=c++11 -DROCKSDB_PLATFORM_POSIX -DOS_LINUX -fno-builtin-memcmp -DROCKSDB_FALLOCATE_PRESENT -DSNAPPY -DGFLAGS=gflags -DZLIB -DBZIP2 -march=native -isystem ./third-party/gtest-1.7.0/fused-src -O2 -fno-omit-frame-pointer -momit-leaf-frame-pointer -DNDEBUG -Woverloaded-virtual -Wnon-virtual-dtor -Wno-missing-field-initializers -c db/repair.cc -o db/repair.o Reviewers: sdong, yhchiang, rven Reviewed By: rven Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D38031
10 years ago
# compile with -O2 if debug level is not 2
ifneq ($(DEBUG_LEVEL), 2)
OPT += -O2 -fno-omit-frame-pointer
ifneq ($(MACHINE),ppc64) # ppc64 doesn't support -momit-leaf-frame-pointer
OPT += -momit-leaf-frame-pointer
endif
endif
# if we're compiling for release, compile without debug code (-DNDEBUG) and
# don't treat warnings as errors
ifeq ($(DEBUG_LEVEL),0)
OPT += -DNDEBUG
Don't treat warnings as error when building release Summary: This will reduce errors reported by open source by 90%. Developers should have warnings break their compile. Users shouldn't. Test Plan: make dbg: g++ -g -W -Wextra -Wall -Wsign-compare -Wshadow -Wno-unused-parameter -Werror -I. -I./include -std=c++11 -DROCKSDB_PLATFORM_POSIX -DOS_LINUX -fno-builtin-memcmp -DROCKSDB_FALLOCATE_PRESENT -DSNAPPY -DGFLAGS=gflags -DZLIB -DBZIP2 -march=native -isystem ./third-party/gtest-1.7.0/fused-src -Woverloaded-virtual -Wn on-virtual-dtor -Wno-missing-field-initializers -c db/repair.cc -o db/repair.o make all: g++ -g -W -Wextra -Wall -Wsign-compare -Wshadow -Wno-unused-parameter -Werror -I. -I./include -std=c++11 -DROCKSDB_PLATFORM_POSIX -DOS_LINUX -fno-builtin-memcmp -DROCKSDB_FALLOCATE_PRESENT -DSNAPPY -DGFLAGS=gflags -DZLIB -DBZIP2 -march=native -isystem ./third-party/gtest-1.7.0/fused-src -O2 -fno-omit-frame-pointer -momit-leaf-frame-pointer -Woverloaded-virtual -Wnon-virtual-dtor -Wno-missing-field-initializers -c db/repair.cc -o db/repair.o make static_lib: g++ -g -W -Wextra -Wall -Wsign-compare -Wshadow -Wno-unused-parameter -I. -I./include -std=c++11 -DROCKSDB_PLATFORM_POSIX -DOS_LINUX -fno-builtin-memcmp -DROCKSDB_FALLOCATE_PRESENT -DSNAPPY -DGFLAGS=gflags -DZLIB -DBZIP2 -march=native -isystem ./third-party/gtest-1.7.0/fused-src -O2 -fno-omit-frame-pointer -momit-leaf-frame-pointer -DNDEBUG -Woverloaded-virtual -Wnon-virtual-dtor -Wno-missing-field-initializers -c db/repair.cc -o db/repair.o Reviewers: sdong, yhchiang, rven Reviewed By: rven Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D38031
10 years ago
DISABLE_WARNING_AS_ERROR=1
else
$(warning Warning: Compiling in debug mode. Don't use the resulting binary in production)
endif
#-----------------------------------------------
build: fix missing dependency problems Summary: Any time one would modify a dependent of any *test*.cc file, "make" would fail to rebuild the affected test binaries, e.g., db_test. That was due to the fact that we deliberately excluded those test-related files from the definition of SOURCES and only $(SOURCES) was used to create the automatically-generated .d dependency files. The fix is to generate a .d file for every source file. * src.mk: New file. Defines LIB_SOURCES, MOCK_SOURCES and TEST_BENCH_SOURCES. * Makefile: Include src.mk. Reflect s/SOURCES/LIB_SOURCES/ renaming. * build_tools/build_detect_platform: Remove the code that was used to generate SOURCES= and MOCK_SOURCES= definitions in make_config.mk. Those lists of files are now hard-coded in src.mk. Hard-coding this list of sources is desirable, because without that, one risks including stray .cc files in a build. Not reproducible. Test Plan: Touch a file used by db_test's dependent .o files and ensure that they are all recompiled. Before, none would be: $ touch db/db_impl.h && make db_test CC db/db_test.o CC db/column_family.o CC db/db_filesnapshot.o CC db/db_impl.o CC db/db_impl_debug.o CC db/db_impl_readonly.o CC db/forward_iterator.o CC db/internal_stats.o CC db/managed_iterator.o CC db/repair.o CC db/write_batch.o CC utilities/compacted_db/compacted_db_impl.o CC utilities/ttl/db_ttl_impl.o CC util/ldb_cmd.o CC util/ldb_tool.o CC util/sst_dump_tool.o CC util/xfunc.o CCLD db_test Reviewers: ljin, igor.sugak, igor, rven, sdong Reviewed By: sdong Subscribers: yhchiang, adamretter, fyrz, dhruba Differential Revision: https://reviews.facebook.net/D33849
10 years ago
include src.mk
AM_DEFAULT_VERBOSITY = 0
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
am__v_at_1 =
AM_V_CC = $(am__v_CC_$(V))
am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
am__v_CC_0 = @echo " CC " $@;
am__v_CC_1 =
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_$(V))
am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
am__v_CCLD_0 = @echo " CCLD " $@;
am__v_CCLD_1 =
AM_V_AR = $(am__v_AR_$(V))
am__v_AR_ = $(am__v_AR_$(AM_DEFAULT_VERBOSITY))
am__v_AR_0 = @echo " AR " $@;
am__v_AR_1 =
AM_LINK = $(AM_V_CCLD)$(CXX) $^ $(EXEC_LDFLAGS) -o $@ $(LDFLAGS) $(COVERAGEFLAGS)
# detect what platform we're building on
dummy := $(shell (export ROCKSDB_ROOT="$(CURDIR)"; "$(CURDIR)/build_tools/build_detect_platform" "$(CURDIR)/make_config.mk"))
# this file is generated by the previous line to set build flags and sources
include make_config.mk
run 'make check's rules (and even subtests) in parallel Summary: When GNU parallel is available, "make check" tests are now run in parallel. When /dev/shm is usable, we tell those tests to create temporary files therein. Now, the longest-running single test, db_test, (which is composed of hundreds of sub-tests) is no longer run sequentially: instead, each of its sub-tests is run independently, and can be parallelized along with all other tests. To make that process easier, this change creates a temporary directory, "t/", in which it puts a small script for each of those subtests. The output from each parallel-run test is now saved in t/log-TEST_NAME. When GNU parallel is not available, we run the tests in sequence, just as before. If GNU parallel is available and you don't like the default of running one subtest per core, you can invoke "make J=1 check" to run only one test at a time. Beware: this will take a long time, and it starts with the two longest-running tests, so you will wait for a long time before seeing any results. Instead, if you want to use fewer resources but still see useful progress, try "make J=60% check". That will attempt to ensure that 60% of the cores are occupied by test runs. To watch progress of individual tests (duration, success (PASS-or-FAIL), name), run "make watch-log" in the same directory from another window. That will start with something like this: and when complete should show numbers/names like this: Every 0.1s: sort -k7,7nr -k4,4gr LOG|perl -n -e '@a=split("\t",$_,-1); $t=$a[8]; $t =~ s,^\./,,;' -e '$t =~ s, >.*,,; chomp $t;' -e '$t =~ /.*--gtest_filter=... Wed Apr 1 10:51:42 2015 152.221 PASS t/DBTest.FileCreationRandomFailure 109.280 PASS t/DBTest.EncodeDecompressedBlockSizeTest 82.315 PASS reduce_levels_test 77.812 PASS t/DBTest.CompactionFilterWithValueChange 73.236 PASS backupable_db_test 63.428 PASS deletefile_test 57.248 PASS table_test 55.665 PASS prefix_test 49.816 PASS t/DBTest.RateLimitingTest ... Test Plan: Timings (measured so as to exclude compile and link times): With this change, all tests complete in 2m40s on a system for which nproc prints 32. Prior to this this change, "make check" would take 24.5 minutes on that same system. Here are durations (in seconds) of the longest-running subtests: 152.435 PASS t/DBTest.FileCreationRandomFailure 107.070 PASS t/DBTest.EncodeDecompressedBlockSizeTest 81.391 PASS ./reduce_levels_test 71.587 PASS ./backupable_db_test 61.746 PASS ./deletefile_test 57.960 PASS ./table_test 55.230 PASS ./prefix_test 54.060 PASS t/DBTest.CompactionFilterWithValueChange 48.873 PASS t/DBTest.RateLimitingTest 47.569 PASS ./fault_injection_test 46.593 PASS t/DBTest.Randomized 42.662 PASS t/DBTest.CompactionFilter 31.793 PASS t/DBTest.SparseMerge 30.612 PASS t/DBTest.CompactionFilterV2 25.891 PASS t/DBTest.GroupCommitTest 23.863 PASS t/DBTest.DynamicLevelMaxBytesBase 22.976 PASS ./rate_limiter_test 18.942 PASS t/DBTest.OptimizeFiltersForHits 16.851 PASS ./env_test 15.399 PASS t/DBTest.CompactionFilterV2WithValueChange 14.827 PASS t/DBTest.CompactionFilterV2NULLPrefix Reviewers: igor, sdong, rven, yhchiang, igor.sugak Reviewed By: igor.sugak Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D35379
10 years ago
CLEAN_FILES += make_config.mk
ifneq ($(PLATFORM), IOS)
CFLAGS += -g
CXXFLAGS += -g
else
# no debug info for IOS, that will make our library big
OPT += -DNDEBUG
endif
ifneq ($(filter -DROCKSDB_LITE,$(OPT)),)
# found
CFLAGS += -fno-exceptions
CXXFLAGS += -fno-exceptions
endif
# ASAN doesn't work well with jemalloc. If we're compiling with ASAN, we should use regular malloc.
ifdef COMPILE_WITH_ASAN
DISABLE_JEMALLOC=1
EXEC_LDFLAGS += -fsanitize=address
PLATFORM_CCFLAGS += -fsanitize=address
PLATFORM_CXXFLAGS += -fsanitize=address
endif
# TSAN doesn't work well with jemalloc. If we're compiling with TSAN, we should use regular malloc.
ifdef COMPILE_WITH_TSAN
DISABLE_JEMALLOC=1
EXEC_LDFLAGS += -fsanitize=thread -pie
PLATFORM_CCFLAGS += -fsanitize=thread -fPIC -DROCKSDB_TSAN_RUN
PLATFORM_CXXFLAGS += -fsanitize=thread -fPIC -DROCKSDB_TSAN_RUN
# Turn off -pg when enabling TSAN testing, because that induces
# a link failure. TODO: find the root cause
pg =
else
pg = -pg
endif
ifndef DISABLE_JEMALLOC
EXEC_LDFLAGS := $(JEMALLOC_LIB) $(EXEC_LDFLAGS)
PLATFORM_CXXFLAGS += $(JEMALLOC_INCLUDE)
PLATFORM_CCFLAGS += $(JEMALLOC_INCLUDE)
endif
export GTEST_THROW_ON_FAILURE=1 GTEST_HAS_EXCEPTIONS=1
GTEST_DIR = ./third-party/gtest-1.7.0/fused-src
PLATFORM_CCFLAGS += -isystem $(GTEST_DIR)
PLATFORM_CXXFLAGS += -isystem $(GTEST_DIR)
# This (the first rule) must depend on "all".
default: all
WARNING_FLAGS = -W -Wextra -Wall -Wsign-compare -Wshadow \
-Wno-unused-parameter
ifndef DISABLE_WARNING_AS_ERROR
WARNING_FLAGS += -Werror
endif
CFLAGS += $(WARNING_FLAGS) -I. -I./include $(PLATFORM_CCFLAGS) $(OPT)
CXXFLAGS += $(WARNING_FLAGS) -I. -I./include $(PLATFORM_CXXFLAGS) $(OPT) -Woverloaded-virtual -Wnon-virtual-dtor -Wno-missing-field-initializers
LDFLAGS += $(PLATFORM_LDFLAGS)
build: do not relink every single binary just for a timestamp Summary: Prior to this change, "make check" would always waste a lot of time relinking 60+ binaries. With this change, it does that only when the generated file, util/build_version.cc, changes, and that happens only when the date changes or when the current git SHA changes. This change makes some other improvements: before, there was no rule to build a deleted util/build_version.cc. If it was somehow removed, any attempt to link a program would fail. There is no longer any need for the separate file, build_tools/build_detect_version. Its functionality is now in the Makefile. * Makefile (DEPFILES): Don't filter-out util/build_version.cc. No need, and besides, removing that dependency was wrong. (date, git_sha, gen_build_version): New helper variables. (util/build_version.cc): New rule, to create this file and update it only if it would contain new information. * build_tools/build_detect_platform: Remove file. * db/db_impl.cc: Now, print only date (not the time). * util/build_version.h (rocksdb_build_compile_time): Remove declaration. No longer used. Test Plan: - Run "make check" twice, and note that the second time no linking is performed. - Remove util/build_version.cc and ensure that any "make" command regenerates it before doing anything else. - Run this: strings librocksdb.a|grep _build_. That prints output including the following: rocksdb_build_git_date:2015-02-19 rocksdb_build_git_sha:2.8.fb-1792-g3cb6cc0 Reviewers: ljin, sdong, igor Reviewed By: igor Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D33591
10 years ago
date := $(shell date +%F)
ifdef FORCE_GIT_SHA
git_sha := $(FORCE_GIT_SHA)
else
git_sha := $(shell git rev-parse HEAD 2>/dev/null)
endif
build: do not relink every single binary just for a timestamp Summary: Prior to this change, "make check" would always waste a lot of time relinking 60+ binaries. With this change, it does that only when the generated file, util/build_version.cc, changes, and that happens only when the date changes or when the current git SHA changes. This change makes some other improvements: before, there was no rule to build a deleted util/build_version.cc. If it was somehow removed, any attempt to link a program would fail. There is no longer any need for the separate file, build_tools/build_detect_version. Its functionality is now in the Makefile. * Makefile (DEPFILES): Don't filter-out util/build_version.cc. No need, and besides, removing that dependency was wrong. (date, git_sha, gen_build_version): New helper variables. (util/build_version.cc): New rule, to create this file and update it only if it would contain new information. * build_tools/build_detect_platform: Remove file. * db/db_impl.cc: Now, print only date (not the time). * util/build_version.h (rocksdb_build_compile_time): Remove declaration. No longer used. Test Plan: - Run "make check" twice, and note that the second time no linking is performed. - Remove util/build_version.cc and ensure that any "make" command regenerates it before doing anything else. - Run this: strings librocksdb.a|grep _build_. That prints output including the following: rocksdb_build_git_date:2015-02-19 rocksdb_build_git_sha:2.8.fb-1792-g3cb6cc0 Reviewers: ljin, sdong, igor Reviewed By: igor Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D33591
10 years ago
gen_build_version = \
printf '%s\n' \
'\#include "build_version.h"' \
'const char* rocksdb_build_git_sha = \
"rocksdb_build_git_sha:$(git_sha)";' \
'const char* rocksdb_build_git_date = \
"rocksdb_build_git_date:$(date)";' \
'const char* rocksdb_build_compile_date = __DATE__;'
build: do not relink every single binary just for a timestamp Summary: Prior to this change, "make check" would always waste a lot of time relinking 60+ binaries. With this change, it does that only when the generated file, util/build_version.cc, changes, and that happens only when the date changes or when the current git SHA changes. This change makes some other improvements: before, there was no rule to build a deleted util/build_version.cc. If it was somehow removed, any attempt to link a program would fail. There is no longer any need for the separate file, build_tools/build_detect_version. Its functionality is now in the Makefile. * Makefile (DEPFILES): Don't filter-out util/build_version.cc. No need, and besides, removing that dependency was wrong. (date, git_sha, gen_build_version): New helper variables. (util/build_version.cc): New rule, to create this file and update it only if it would contain new information. * build_tools/build_detect_platform: Remove file. * db/db_impl.cc: Now, print only date (not the time). * util/build_version.h (rocksdb_build_compile_time): Remove declaration. No longer used. Test Plan: - Run "make check" twice, and note that the second time no linking is performed. - Remove util/build_version.cc and ensure that any "make" command regenerates it before doing anything else. - Run this: strings librocksdb.a|grep _build_. That prints output including the following: rocksdb_build_git_date:2015-02-19 rocksdb_build_git_sha:2.8.fb-1792-g3cb6cc0 Reviewers: ljin, sdong, igor Reviewed By: igor Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D33591
10 years ago
# Record the version of the source that we are compiling.
# We keep a record of the git revision in this file. It is then built
# as a regular source file as part of the compilation process.
# One can run "strings executable_filename | grep _build_" to find
# the version of the source that we used to build the executable file.
run 'make check's rules (and even subtests) in parallel Summary: When GNU parallel is available, "make check" tests are now run in parallel. When /dev/shm is usable, we tell those tests to create temporary files therein. Now, the longest-running single test, db_test, (which is composed of hundreds of sub-tests) is no longer run sequentially: instead, each of its sub-tests is run independently, and can be parallelized along with all other tests. To make that process easier, this change creates a temporary directory, "t/", in which it puts a small script for each of those subtests. The output from each parallel-run test is now saved in t/log-TEST_NAME. When GNU parallel is not available, we run the tests in sequence, just as before. If GNU parallel is available and you don't like the default of running one subtest per core, you can invoke "make J=1 check" to run only one test at a time. Beware: this will take a long time, and it starts with the two longest-running tests, so you will wait for a long time before seeing any results. Instead, if you want to use fewer resources but still see useful progress, try "make J=60% check". That will attempt to ensure that 60% of the cores are occupied by test runs. To watch progress of individual tests (duration, success (PASS-or-FAIL), name), run "make watch-log" in the same directory from another window. That will start with something like this: and when complete should show numbers/names like this: Every 0.1s: sort -k7,7nr -k4,4gr LOG|perl -n -e '@a=split("\t",$_,-1); $t=$a[8]; $t =~ s,^\./,,;' -e '$t =~ s, >.*,,; chomp $t;' -e '$t =~ /.*--gtest_filter=... Wed Apr 1 10:51:42 2015 152.221 PASS t/DBTest.FileCreationRandomFailure 109.280 PASS t/DBTest.EncodeDecompressedBlockSizeTest 82.315 PASS reduce_levels_test 77.812 PASS t/DBTest.CompactionFilterWithValueChange 73.236 PASS backupable_db_test 63.428 PASS deletefile_test 57.248 PASS table_test 55.665 PASS prefix_test 49.816 PASS t/DBTest.RateLimitingTest ... Test Plan: Timings (measured so as to exclude compile and link times): With this change, all tests complete in 2m40s on a system for which nproc prints 32. Prior to this this change, "make check" would take 24.5 minutes on that same system. Here are durations (in seconds) of the longest-running subtests: 152.435 PASS t/DBTest.FileCreationRandomFailure 107.070 PASS t/DBTest.EncodeDecompressedBlockSizeTest 81.391 PASS ./reduce_levels_test 71.587 PASS ./backupable_db_test 61.746 PASS ./deletefile_test 57.960 PASS ./table_test 55.230 PASS ./prefix_test 54.060 PASS t/DBTest.CompactionFilterWithValueChange 48.873 PASS t/DBTest.RateLimitingTest 47.569 PASS ./fault_injection_test 46.593 PASS t/DBTest.Randomized 42.662 PASS t/DBTest.CompactionFilter 31.793 PASS t/DBTest.SparseMerge 30.612 PASS t/DBTest.CompactionFilterV2 25.891 PASS t/DBTest.GroupCommitTest 23.863 PASS t/DBTest.DynamicLevelMaxBytesBase 22.976 PASS ./rate_limiter_test 18.942 PASS t/DBTest.OptimizeFiltersForHits 16.851 PASS ./env_test 15.399 PASS t/DBTest.CompactionFilterV2WithValueChange 14.827 PASS t/DBTest.CompactionFilterV2NULLPrefix Reviewers: igor, sdong, rven, yhchiang, igor.sugak Reviewed By: igor.sugak Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D35379
10 years ago
CLEAN_FILES += util/build_version.cc:
FORCE:
util/build_version.cc: FORCE
$(AM_V_GEN)rm -f $@-t
$(AM_V_at)$(gen_build_version) > $@-t
$(AM_V_at)if test -f $@; then \
cmp -s $@-t $@ && rm -f $@-t || mv -f $@-t $@; \
else mv -f $@-t $@; fi
build: do not relink every single binary just for a timestamp Summary: Prior to this change, "make check" would always waste a lot of time relinking 60+ binaries. With this change, it does that only when the generated file, util/build_version.cc, changes, and that happens only when the date changes or when the current git SHA changes. This change makes some other improvements: before, there was no rule to build a deleted util/build_version.cc. If it was somehow removed, any attempt to link a program would fail. There is no longer any need for the separate file, build_tools/build_detect_version. Its functionality is now in the Makefile. * Makefile (DEPFILES): Don't filter-out util/build_version.cc. No need, and besides, removing that dependency was wrong. (date, git_sha, gen_build_version): New helper variables. (util/build_version.cc): New rule, to create this file and update it only if it would contain new information. * build_tools/build_detect_platform: Remove file. * db/db_impl.cc: Now, print only date (not the time). * util/build_version.h (rocksdb_build_compile_time): Remove declaration. No longer used. Test Plan: - Run "make check" twice, and note that the second time no linking is performed. - Remove util/build_version.cc and ensure that any "make" command regenerates it before doing anything else. - Run this: strings librocksdb.a|grep _build_. That prints output including the following: rocksdb_build_git_date:2015-02-19 rocksdb_build_git_sha:2.8.fb-1792-g3cb6cc0 Reviewers: ljin, sdong, igor Reviewed By: igor Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D33591
10 years ago
build: fix missing dependency problems Summary: Any time one would modify a dependent of any *test*.cc file, "make" would fail to rebuild the affected test binaries, e.g., db_test. That was due to the fact that we deliberately excluded those test-related files from the definition of SOURCES and only $(SOURCES) was used to create the automatically-generated .d dependency files. The fix is to generate a .d file for every source file. * src.mk: New file. Defines LIB_SOURCES, MOCK_SOURCES and TEST_BENCH_SOURCES. * Makefile: Include src.mk. Reflect s/SOURCES/LIB_SOURCES/ renaming. * build_tools/build_detect_platform: Remove the code that was used to generate SOURCES= and MOCK_SOURCES= definitions in make_config.mk. Those lists of files are now hard-coded in src.mk. Hard-coding this list of sources is desirable, because without that, one risks including stray .cc files in a build. Not reproducible. Test Plan: Touch a file used by db_test's dependent .o files and ensure that they are all recompiled. Before, none would be: $ touch db/db_impl.h && make db_test CC db/db_test.o CC db/column_family.o CC db/db_filesnapshot.o CC db/db_impl.o CC db/db_impl_debug.o CC db/db_impl_readonly.o CC db/forward_iterator.o CC db/internal_stats.o CC db/managed_iterator.o CC db/repair.o CC db/write_batch.o CC utilities/compacted_db/compacted_db_impl.o CC utilities/ttl/db_ttl_impl.o CC util/ldb_cmd.o CC util/ldb_tool.o CC util/sst_dump_tool.o CC util/xfunc.o CCLD db_test Reviewers: ljin, igor.sugak, igor, rven, sdong Reviewed By: sdong Subscribers: yhchiang, adamretter, fyrz, dhruba Differential Revision: https://reviews.facebook.net/D33849
10 years ago
LIBOBJECTS = $(LIB_SOURCES:.cc=.o)
LIBOBJECTS += $(TOOL_SOURCES:.cc=.o)
MOCKOBJECTS = $(MOCK_SOURCES:.cc=.o)
GTEST = $(GTEST_DIR)/gtest/gtest-all.o
TESTUTIL = ./util/testutil.o
TESTHARNESS = ./util/testharness.o $(TESTUTIL) $(MOCKOBJECTS) $(GTEST)
VALGRIND_ERROR = 2
VALGRIND_VER := $(join $(VALGRIND_VER),valgrind)
VALGRIND_OPTS = --error-exitcode=$(VALGRIND_ERROR) --leak-check=full
TESTS = \
db_test \
db_iter_test \
db_log_iter_test \
db_compaction_filter_test \
db_compaction_test \
db_dynamic_level_test \
db_inplace_update_test \
db_tailing_iter_test \
db_universal_compaction_test \
db_wal_test \
block_hash_index_test \
autovector_test \
column_family_test \
table_properties_collector_test \
arena_test \
auto_roll_logger_test \
block_test \
bloom_test \
dynamic_bloom_test \
c_test \
cache_test \
checkpoint_test \
coding_test \
corruption_test \
crc32c_test \
slice_transform_test \
dbformat_test \
env_test \
fault_injection_test \
filelock_test \
filename_test \
file_reader_writer_test \
block_based_filter_block_test \
full_filter_block_test \
histogram_test \
log_test \
manual_compaction_test \
memenv_test \
mock_env_test \
memtable_list_test \
merge_helper_test \
merge_test \
merger_test \
redis_test \
reduce_levels_test \
plain_table_db_test \
comparator_db_test \
prefix_test \
skiplist_test \
stringappend_test \
ttl_test \
backupable_db_test \
document_db_test \
json_document_test \
spatial_db_test \
version_edit_test \
version_set_test \
compaction_picker_test \
version_builder_test \
file_indexer_test \
write_batch_test \
write_batch_with_index_test \
write_controller_test\
deletefile_test \
table_test \
thread_local_test \
geodb_test \
rate_limiter_test \
delete_scheduler_test \
options_test \
event_logger_test \
cuckoo_table_builder_test \
cuckoo_table_reader_test \
cuckoo_table_db_test \
flush_job_test \
wal_manager_test \
listener_test \
Support for SingleDelete() Summary: This patch fixes #7460559. It introduces SingleDelete as a new database operation. This operation can be used to delete keys that were never overwritten (no put following another put of the same key). If an overwritten key is single deleted the behavior is undefined. Single deletion of a non-existent key has no effect but multiple consecutive single deletions are not allowed (see limitations). In contrast to the conventional Delete() operation, the deletion entry is removed along with the value when the two are lined up in a compaction. Note: The semantics are similar to @igor's prototype that allowed to have this behavior on the granularity of a column family ( https://reviews.facebook.net/D42093 ). This new patch, however, is more aggressive when it comes to removing tombstones: It removes the SingleDelete together with the value whenever there is no snapshot between them while the older patch only did this when the sequence number of the deletion was older than the earliest snapshot. Most of the complex additions are in the Compaction Iterator, all other changes should be relatively straightforward. The patch also includes basic support for single deletions in db_stress and db_bench. Limitations: - Not compatible with cuckoo hash tables - Single deletions cannot be used in combination with merges and normal deletions on the same key (other keys are not affected by this) - Consecutive single deletions are currently not allowed (and older version of this patch supported this so it could be resurrected if needed) Test Plan: make all check Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor Reviewed By: igor Subscribers: maykov, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D43179
9 years ago
compaction_iterator_test \
compaction_job_test \
thread_list_test \
sst_dump_test \
compact_files_test \
perf_context_test \
optimistic_transaction_test \
write_callback_test \
heap_test \
compact_on_deletion_collector_test \
compaction_job_stats_test \
transaction_test \
ldb_cmd_test
SUBSET := $(shell echo $(TESTS) |sed s/^.*$(ROCKSDBTESTS_START)/$(ROCKSDBTESTS_START)/)
Utility to dump manifest contents. Summary: ./manifest_dump --file=/tmp/dbbench/MANIFEST-000002 Output looks like manifest_file_number 30 next_file_number 31 last_sequence 388082 log_number 28 prev_log_number 0 --- level 0 --- --- level 1 --- --- level 2 --- 5:3244155['0000000000000000' @ 1 : 1 .. '0000000000028220' @ 28221 : 1] 7:3244177['0000000000028221' @ 28222 : 1 .. '0000000000056441' @ 56442 : 1] 9:3244156['0000000000056442' @ 56443 : 1 .. '0000000000084662' @ 84663 : 1] 11:3244178['0000000000084663' @ 84664 : 1 .. '0000000000112883' @ 112884 : 1] 13:3244158['0000000000112884' @ 112885 : 1 .. '0000000000141104' @ 141105 : 1] 15:3244176['0000000000141105' @ 141106 : 1 .. '0000000000169325' @ 169326 : 1] 17:3244156['0000000000169326' @ 169327 : 1 .. '0000000000197546' @ 197547 : 1] 19:3244178['0000000000197547' @ 197548 : 1 .. '0000000000225767' @ 225768 : 1] 21:3244155['0000000000225768' @ 225769 : 1 .. '0000000000253988' @ 253989 : 1] 23:3244179['0000000000253989' @ 253990 : 1 .. '0000000000282209' @ 282210 : 1] 25:3244157['0000000000282210' @ 282211 : 1 .. '0000000000310430' @ 310431 : 1] 27:3244176['0000000000310431' @ 310432 : 1 .. '0000000000338651' @ 338652 : 1] 29:3244156['0000000000338652' @ 338653 : 1 .. '0000000000366872' @ 366873 : 1] --- level 3 --- --- level 4 --- --- level 5 --- --- level 6 --- Test Plan: run on test directory created by dbbench Reviewers: heyongqiang Reviewed By: heyongqiang CC: hustliubo Differential Revision: https://reviews.facebook.net/D4743
12 years ago
TOOLS = \
sst_dump \
db_sanity_test \
db_stress \
ldb \
db_repl_stress \
rocksdb_dump \
rocksdb_undump
BENCHMARKS = db_bench table_reader_bench cache_bench memtablerep_bench
# if user didn't config LIBNAME, set the default
ifeq ($(LIBNAME),)
# we should only run rocksdb in production with DEBUG_LEVEL 0
ifeq ($(DEBUG_LEVEL),0)
LIBNAME=librocksdb
else
LIBNAME=librocksdb_debug
endif
endif
LIBRARY = ${LIBNAME}.a
ROCKSDB_MAJOR = $(shell egrep "ROCKSDB_MAJOR.[0-9]" include/rocksdb/version.h | cut -d ' ' -f 3)
ROCKSDB_MINOR = $(shell egrep "ROCKSDB_MINOR.[0-9]" include/rocksdb/version.h | cut -d ' ' -f 3)
ROCKSDB_PATCH = $(shell egrep "ROCKSDB_PATCH.[0-9]" include/rocksdb/version.h | cut -d ' ' -f 3)
Package generation for Ubuntu and CentOS Summary: I put together a script to assist in the generation of deb's and rpm's. I've tested that this works on ubuntu via vagrant. I've included the Vagrantfile here, but I can remove it if it's not useful. The package.sh script should work on any ubuntu or centos machine, I just added a bit of logic in there to allow a base Ubuntu or Centos machine to be able to build RocksDB from scratch. Example output on Ubuntu 14.04: ``` root@vagrant-ubuntu-trusty-64:/vagrant# ./tools/package.sh [+] g++-4.7 is already installed. skipping. [+] libgflags-dev is already installed. skipping. [+] ruby-all-dev is already installed. skipping. [+] fpm is already installed. skipping. Created package {:path=>"rocksdb_3.5_amd64.deb"} root@vagrant-ubuntu-trusty-64:/vagrant# dpkg --info rocksdb_3.5_amd64.deb new debian package, version 2.0. size 17392022 bytes: control archive=1518 bytes. 275 bytes, 11 lines control 2911 bytes, 38 lines md5sums Package: rocksdb Version: 3.5 License: BSD Vendor: Facebook Architecture: amd64 Maintainer: rocksdb@fb.com Installed-Size: 83358 Section: default Priority: extra Homepage: http://rocksdb.org/ Description: RocksDB is an embeddable persistent key-value store for fast storage. ``` Example output on CentOS 6.5: ``` [root@localhost vagrant]# rpm -qip rocksdb-3.5-1.x86_64.rpm Name : rocksdb Relocations: /usr Version : 3.5 Vendor: Facebook Release : 1 Build Date: Mon 29 Sep 2014 01:26:11 AM UTC Install Date: (not installed) Build Host: localhost Group : default Source RPM: rocksdb-3.5-1.src.rpm Size : 96231106 License: BSD Signature : (none) Packager : rocksdb@fb.com URL : http://rocksdb.org/ Summary : RocksDB is an embeddable persistent key-value store for fast storage. Description : RocksDB is an embeddable persistent key-value store for fast storage. ``` Test Plan: How this gets used is really up to the RocksDB core team. If you want to actually get this into mainline, you might have to change `make install` such that it install the RocksDB shared object file as well, which would require you to link against gflags (maybe?) and that would require some potential modifications to the script here (basically add a depends on that package). Currently, this will install the headers and a pre-compiled statically linked object file. If that's what you want out of life, than this requires no modifications. Reviewers: ljin, yhchiang, igor Reviewed By: igor Differential Revision: https://reviews.facebook.net/D24141
10 years ago
default: all
#-----------------------------------------------
# Create platform independent shared libraries.
#-----------------------------------------------
ifneq ($(PLATFORM_SHARED_EXT),)
ifneq ($(PLATFORM_SHARED_VERSIONED),true)
SHARED1 = ${LIBNAME}.$(PLATFORM_SHARED_EXT)
SHARED2 = $(SHARED1)
SHARED3 = $(SHARED1)
SHARED4 = $(SHARED1)
SHARED = $(SHARED1)
else
Package generation for Ubuntu and CentOS Summary: I put together a script to assist in the generation of deb's and rpm's. I've tested that this works on ubuntu via vagrant. I've included the Vagrantfile here, but I can remove it if it's not useful. The package.sh script should work on any ubuntu or centos machine, I just added a bit of logic in there to allow a base Ubuntu or Centos machine to be able to build RocksDB from scratch. Example output on Ubuntu 14.04: ``` root@vagrant-ubuntu-trusty-64:/vagrant# ./tools/package.sh [+] g++-4.7 is already installed. skipping. [+] libgflags-dev is already installed. skipping. [+] ruby-all-dev is already installed. skipping. [+] fpm is already installed. skipping. Created package {:path=>"rocksdb_3.5_amd64.deb"} root@vagrant-ubuntu-trusty-64:/vagrant# dpkg --info rocksdb_3.5_amd64.deb new debian package, version 2.0. size 17392022 bytes: control archive=1518 bytes. 275 bytes, 11 lines control 2911 bytes, 38 lines md5sums Package: rocksdb Version: 3.5 License: BSD Vendor: Facebook Architecture: amd64 Maintainer: rocksdb@fb.com Installed-Size: 83358 Section: default Priority: extra Homepage: http://rocksdb.org/ Description: RocksDB is an embeddable persistent key-value store for fast storage. ``` Example output on CentOS 6.5: ``` [root@localhost vagrant]# rpm -qip rocksdb-3.5-1.x86_64.rpm Name : rocksdb Relocations: /usr Version : 3.5 Vendor: Facebook Release : 1 Build Date: Mon 29 Sep 2014 01:26:11 AM UTC Install Date: (not installed) Build Host: localhost Group : default Source RPM: rocksdb-3.5-1.src.rpm Size : 96231106 License: BSD Signature : (none) Packager : rocksdb@fb.com URL : http://rocksdb.org/ Summary : RocksDB is an embeddable persistent key-value store for fast storage. Description : RocksDB is an embeddable persistent key-value store for fast storage. ``` Test Plan: How this gets used is really up to the RocksDB core team. If you want to actually get this into mainline, you might have to change `make install` such that it install the RocksDB shared object file as well, which would require you to link against gflags (maybe?) and that would require some potential modifications to the script here (basically add a depends on that package). Currently, this will install the headers and a pre-compiled statically linked object file. If that's what you want out of life, than this requires no modifications. Reviewers: ljin, yhchiang, igor Reviewed By: igor Differential Revision: https://reviews.facebook.net/D24141
10 years ago
SHARED_MAJOR = $(ROCKSDB_MAJOR)
SHARED_MINOR = $(ROCKSDB_MINOR)
SHARED_PATCH = $(ROCKSDB_PATCH)
SHARED1 = ${LIBNAME}.$(PLATFORM_SHARED_EXT)
ifeq ($(PLATFORM), OS_MACOSX)
SHARED_OSX = $(LIBNAME).$(SHARED_MAJOR)
SHARED2 = $(SHARED_OSX).$(PLATFORM_SHARED_EXT)
SHARED3 = $(SHARED_OSX).$(SHARED_MINOR).$(PLATFORM_SHARED_EXT)
SHARED4 = $(SHARED_OSX).$(SHARED_MINOR).$(SHARED_PATCH).$(PLATFORM_SHARED_EXT)
else
SHARED2 = $(SHARED1).$(SHARED_MAJOR)
SHARED3 = $(SHARED1).$(SHARED_MAJOR).$(SHARED_MINOR)
SHARED4 = $(SHARED1).$(SHARED_MAJOR).$(SHARED_MINOR).$(SHARED_PATCH)
endif
SHARED = $(SHARED1) $(SHARED2) $(SHARED3) $(SHARED4)
$(SHARED1): $(SHARED4)
ln -fs $(SHARED4) $(SHARED1)
$(SHARED2): $(SHARED4)
ln -fs $(SHARED4) $(SHARED2)
$(SHARED3): $(SHARED4)
ln -fs $(SHARED4) $(SHARED3)
endif
$(SHARED4):
$(CXX) $(PLATFORM_SHARED_LDFLAGS)$(SHARED3) $(CXXFLAGS) $(PLATFORM_SHARED_CFLAGS) $(LIB_SOURCES) \
$(LDFLAGS) -o $@
endif # PLATFORM_SHARED_EXT
Package generation for Ubuntu and CentOS Summary: I put together a script to assist in the generation of deb's and rpm's. I've tested that this works on ubuntu via vagrant. I've included the Vagrantfile here, but I can remove it if it's not useful. The package.sh script should work on any ubuntu or centos machine, I just added a bit of logic in there to allow a base Ubuntu or Centos machine to be able to build RocksDB from scratch. Example output on Ubuntu 14.04: ``` root@vagrant-ubuntu-trusty-64:/vagrant# ./tools/package.sh [+] g++-4.7 is already installed. skipping. [+] libgflags-dev is already installed. skipping. [+] ruby-all-dev is already installed. skipping. [+] fpm is already installed. skipping. Created package {:path=>"rocksdb_3.5_amd64.deb"} root@vagrant-ubuntu-trusty-64:/vagrant# dpkg --info rocksdb_3.5_amd64.deb new debian package, version 2.0. size 17392022 bytes: control archive=1518 bytes. 275 bytes, 11 lines control 2911 bytes, 38 lines md5sums Package: rocksdb Version: 3.5 License: BSD Vendor: Facebook Architecture: amd64 Maintainer: rocksdb@fb.com Installed-Size: 83358 Section: default Priority: extra Homepage: http://rocksdb.org/ Description: RocksDB is an embeddable persistent key-value store for fast storage. ``` Example output on CentOS 6.5: ``` [root@localhost vagrant]# rpm -qip rocksdb-3.5-1.x86_64.rpm Name : rocksdb Relocations: /usr Version : 3.5 Vendor: Facebook Release : 1 Build Date: Mon 29 Sep 2014 01:26:11 AM UTC Install Date: (not installed) Build Host: localhost Group : default Source RPM: rocksdb-3.5-1.src.rpm Size : 96231106 License: BSD Signature : (none) Packager : rocksdb@fb.com URL : http://rocksdb.org/ Summary : RocksDB is an embeddable persistent key-value store for fast storage. Description : RocksDB is an embeddable persistent key-value store for fast storage. ``` Test Plan: How this gets used is really up to the RocksDB core team. If you want to actually get this into mainline, you might have to change `make install` such that it install the RocksDB shared object file as well, which would require you to link against gflags (maybe?) and that would require some potential modifications to the script here (basically add a depends on that package). Currently, this will install the headers and a pre-compiled statically linked object file. If that's what you want out of life, than this requires no modifications. Reviewers: ljin, yhchiang, igor Reviewed By: igor Differential Revision: https://reviews.facebook.net/D24141
10 years ago
.PHONY: blackbox_crash_test check clean coverage crash_test ldb_tests package \
release tags valgrind_check whitebox_crash_test format static_lib shared_lib all \
dbg rocksdbjavastatic rocksdbjava install install-static install-shared uninstall \
analyze tools
all: $(LIBRARY) $(BENCHMARKS) tools $(TESTS)
static_lib: $(LIBRARY)
shared_lib: $(SHARED)
tools: $(TOOLS)
dbg: $(LIBRARY) $(BENCHMARKS) tools $(TESTS)
# creates static library and programs
release:
$(MAKE) clean
OPT="-DNDEBUG -O2" $(MAKE) static_lib tools db_bench
coverage:
$(MAKE) clean
COVERAGEFLAGS="-fprofile-arcs -ftest-coverage" LDFLAGS+="-lgcov" $(MAKE) J=1 all check
cd coverage && ./coverage_test.sh
# Delete intermediate files
find . -type f -regex ".*\.\(\(gcda\)\|\(gcno\)\)" -exec rm {} \;
run 'make check's rules (and even subtests) in parallel Summary: When GNU parallel is available, "make check" tests are now run in parallel. When /dev/shm is usable, we tell those tests to create temporary files therein. Now, the longest-running single test, db_test, (which is composed of hundreds of sub-tests) is no longer run sequentially: instead, each of its sub-tests is run independently, and can be parallelized along with all other tests. To make that process easier, this change creates a temporary directory, "t/", in which it puts a small script for each of those subtests. The output from each parallel-run test is now saved in t/log-TEST_NAME. When GNU parallel is not available, we run the tests in sequence, just as before. If GNU parallel is available and you don't like the default of running one subtest per core, you can invoke "make J=1 check" to run only one test at a time. Beware: this will take a long time, and it starts with the two longest-running tests, so you will wait for a long time before seeing any results. Instead, if you want to use fewer resources but still see useful progress, try "make J=60% check". That will attempt to ensure that 60% of the cores are occupied by test runs. To watch progress of individual tests (duration, success (PASS-or-FAIL), name), run "make watch-log" in the same directory from another window. That will start with something like this: and when complete should show numbers/names like this: Every 0.1s: sort -k7,7nr -k4,4gr LOG|perl -n -e '@a=split("\t",$_,-1); $t=$a[8]; $t =~ s,^\./,,;' -e '$t =~ s, >.*,,; chomp $t;' -e '$t =~ /.*--gtest_filter=... Wed Apr 1 10:51:42 2015 152.221 PASS t/DBTest.FileCreationRandomFailure 109.280 PASS t/DBTest.EncodeDecompressedBlockSizeTest 82.315 PASS reduce_levels_test 77.812 PASS t/DBTest.CompactionFilterWithValueChange 73.236 PASS backupable_db_test 63.428 PASS deletefile_test 57.248 PASS table_test 55.665 PASS prefix_test 49.816 PASS t/DBTest.RateLimitingTest ... Test Plan: Timings (measured so as to exclude compile and link times): With this change, all tests complete in 2m40s on a system for which nproc prints 32. Prior to this this change, "make check" would take 24.5 minutes on that same system. Here are durations (in seconds) of the longest-running subtests: 152.435 PASS t/DBTest.FileCreationRandomFailure 107.070 PASS t/DBTest.EncodeDecompressedBlockSizeTest 81.391 PASS ./reduce_levels_test 71.587 PASS ./backupable_db_test 61.746 PASS ./deletefile_test 57.960 PASS ./table_test 55.230 PASS ./prefix_test 54.060 PASS t/DBTest.CompactionFilterWithValueChange 48.873 PASS t/DBTest.RateLimitingTest 47.569 PASS ./fault_injection_test 46.593 PASS t/DBTest.Randomized 42.662 PASS t/DBTest.CompactionFilter 31.793 PASS t/DBTest.SparseMerge 30.612 PASS t/DBTest.CompactionFilterV2 25.891 PASS t/DBTest.GroupCommitTest 23.863 PASS t/DBTest.DynamicLevelMaxBytesBase 22.976 PASS ./rate_limiter_test 18.942 PASS t/DBTest.OptimizeFiltersForHits 16.851 PASS ./env_test 15.399 PASS t/DBTest.CompactionFilterV2WithValueChange 14.827 PASS t/DBTest.CompactionFilterV2NULLPrefix Reviewers: igor, sdong, rven, yhchiang, igor.sugak Reviewed By: igor.sugak Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D35379
10 years ago
# Extract the names of its tests by running db_test with --gtest_list_tests.
# This filter removes the "#"-introduced comments, and expands to
# fully-qualified names by changing input like this:
#
# DBTest.
# Empty
# WriteEmptyBatch
# MultiThreaded/MultiThreadedDBTest.
# MultiThreaded/0 # GetParam() = 0
# MultiThreaded/1 # GetParam() = 1
#
# into this:
#
# DBTest.Empty
# DBTest.WriteEmptyBatch
# MultiThreaded/MultiThreadedDBTest.MultiThreaded/0
# MultiThreaded/MultiThreadedDBTest.MultiThreaded/1
#
test_names = \
./db_test --gtest_list_tests \
| perl -n \
-e 's/ *\#.*//;' \
-e '/^(\s*)(\S+)/; !$$1 and do {$$p=$$2; break};' \
-e 'print qq! $$p$$2!'
run 'make check's rules (and even subtests) in parallel Summary: When GNU parallel is available, "make check" tests are now run in parallel. When /dev/shm is usable, we tell those tests to create temporary files therein. Now, the longest-running single test, db_test, (which is composed of hundreds of sub-tests) is no longer run sequentially: instead, each of its sub-tests is run independently, and can be parallelized along with all other tests. To make that process easier, this change creates a temporary directory, "t/", in which it puts a small script for each of those subtests. The output from each parallel-run test is now saved in t/log-TEST_NAME. When GNU parallel is not available, we run the tests in sequence, just as before. If GNU parallel is available and you don't like the default of running one subtest per core, you can invoke "make J=1 check" to run only one test at a time. Beware: this will take a long time, and it starts with the two longest-running tests, so you will wait for a long time before seeing any results. Instead, if you want to use fewer resources but still see useful progress, try "make J=60% check". That will attempt to ensure that 60% of the cores are occupied by test runs. To watch progress of individual tests (duration, success (PASS-or-FAIL), name), run "make watch-log" in the same directory from another window. That will start with something like this: and when complete should show numbers/names like this: Every 0.1s: sort -k7,7nr -k4,4gr LOG|perl -n -e '@a=split("\t",$_,-1); $t=$a[8]; $t =~ s,^\./,,;' -e '$t =~ s, >.*,,; chomp $t;' -e '$t =~ /.*--gtest_filter=... Wed Apr 1 10:51:42 2015 152.221 PASS t/DBTest.FileCreationRandomFailure 109.280 PASS t/DBTest.EncodeDecompressedBlockSizeTest 82.315 PASS reduce_levels_test 77.812 PASS t/DBTest.CompactionFilterWithValueChange 73.236 PASS backupable_db_test 63.428 PASS deletefile_test 57.248 PASS table_test 55.665 PASS prefix_test 49.816 PASS t/DBTest.RateLimitingTest ... Test Plan: Timings (measured so as to exclude compile and link times): With this change, all tests complete in 2m40s on a system for which nproc prints 32. Prior to this this change, "make check" would take 24.5 minutes on that same system. Here are durations (in seconds) of the longest-running subtests: 152.435 PASS t/DBTest.FileCreationRandomFailure 107.070 PASS t/DBTest.EncodeDecompressedBlockSizeTest 81.391 PASS ./reduce_levels_test 71.587 PASS ./backupable_db_test 61.746 PASS ./deletefile_test 57.960 PASS ./table_test 55.230 PASS ./prefix_test 54.060 PASS t/DBTest.CompactionFilterWithValueChange 48.873 PASS t/DBTest.RateLimitingTest 47.569 PASS ./fault_injection_test 46.593 PASS t/DBTest.Randomized 42.662 PASS t/DBTest.CompactionFilter 31.793 PASS t/DBTest.SparseMerge 30.612 PASS t/DBTest.CompactionFilterV2 25.891 PASS t/DBTest.GroupCommitTest 23.863 PASS t/DBTest.DynamicLevelMaxBytesBase 22.976 PASS ./rate_limiter_test 18.942 PASS t/DBTest.OptimizeFiltersForHits 16.851 PASS ./env_test 15.399 PASS t/DBTest.CompactionFilterV2WithValueChange 14.827 PASS t/DBTest.CompactionFilterV2NULLPrefix Reviewers: igor, sdong, rven, yhchiang, igor.sugak Reviewed By: igor.sugak Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D35379
10 years ago
ifeq ($(MAKECMDGOALS),check)
# Use /dev/shm if it has the sticky bit set (otherwise, /tmp),
# and create a randomly-named rocksdb.XXXX directory therein.
# We'll use that directory in the "make check" rules.
ifeq ($(TMPD),)
TMPD := $(shell f=/dev/shm; test -k $$f || f=/tmp; \
perl -le 'use File::Temp "tempdir";' \
-e 'print tempdir("'$$f'/rocksdb.XXXX", CLEANUP => 0)')
run 'make check's rules (and even subtests) in parallel Summary: When GNU parallel is available, "make check" tests are now run in parallel. When /dev/shm is usable, we tell those tests to create temporary files therein. Now, the longest-running single test, db_test, (which is composed of hundreds of sub-tests) is no longer run sequentially: instead, each of its sub-tests is run independently, and can be parallelized along with all other tests. To make that process easier, this change creates a temporary directory, "t/", in which it puts a small script for each of those subtests. The output from each parallel-run test is now saved in t/log-TEST_NAME. When GNU parallel is not available, we run the tests in sequence, just as before. If GNU parallel is available and you don't like the default of running one subtest per core, you can invoke "make J=1 check" to run only one test at a time. Beware: this will take a long time, and it starts with the two longest-running tests, so you will wait for a long time before seeing any results. Instead, if you want to use fewer resources but still see useful progress, try "make J=60% check". That will attempt to ensure that 60% of the cores are occupied by test runs. To watch progress of individual tests (duration, success (PASS-or-FAIL), name), run "make watch-log" in the same directory from another window. That will start with something like this: and when complete should show numbers/names like this: Every 0.1s: sort -k7,7nr -k4,4gr LOG|perl -n -e '@a=split("\t",$_,-1); $t=$a[8]; $t =~ s,^\./,,;' -e '$t =~ s, >.*,,; chomp $t;' -e '$t =~ /.*--gtest_filter=... Wed Apr 1 10:51:42 2015 152.221 PASS t/DBTest.FileCreationRandomFailure 109.280 PASS t/DBTest.EncodeDecompressedBlockSizeTest 82.315 PASS reduce_levels_test 77.812 PASS t/DBTest.CompactionFilterWithValueChange 73.236 PASS backupable_db_test 63.428 PASS deletefile_test 57.248 PASS table_test 55.665 PASS prefix_test 49.816 PASS t/DBTest.RateLimitingTest ... Test Plan: Timings (measured so as to exclude compile and link times): With this change, all tests complete in 2m40s on a system for which nproc prints 32. Prior to this this change, "make check" would take 24.5 minutes on that same system. Here are durations (in seconds) of the longest-running subtests: 152.435 PASS t/DBTest.FileCreationRandomFailure 107.070 PASS t/DBTest.EncodeDecompressedBlockSizeTest 81.391 PASS ./reduce_levels_test 71.587 PASS ./backupable_db_test 61.746 PASS ./deletefile_test 57.960 PASS ./table_test 55.230 PASS ./prefix_test 54.060 PASS t/DBTest.CompactionFilterWithValueChange 48.873 PASS t/DBTest.RateLimitingTest 47.569 PASS ./fault_injection_test 46.593 PASS t/DBTest.Randomized 42.662 PASS t/DBTest.CompactionFilter 31.793 PASS t/DBTest.SparseMerge 30.612 PASS t/DBTest.CompactionFilterV2 25.891 PASS t/DBTest.GroupCommitTest 23.863 PASS t/DBTest.DynamicLevelMaxBytesBase 22.976 PASS ./rate_limiter_test 18.942 PASS t/DBTest.OptimizeFiltersForHits 16.851 PASS ./env_test 15.399 PASS t/DBTest.CompactionFilterV2WithValueChange 14.827 PASS t/DBTest.CompactionFilterV2NULLPrefix Reviewers: igor, sdong, rven, yhchiang, igor.sugak Reviewed By: igor.sugak Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D35379
10 years ago
endif
endif
run 'make check's rules (and even subtests) in parallel Summary: When GNU parallel is available, "make check" tests are now run in parallel. When /dev/shm is usable, we tell those tests to create temporary files therein. Now, the longest-running single test, db_test, (which is composed of hundreds of sub-tests) is no longer run sequentially: instead, each of its sub-tests is run independently, and can be parallelized along with all other tests. To make that process easier, this change creates a temporary directory, "t/", in which it puts a small script for each of those subtests. The output from each parallel-run test is now saved in t/log-TEST_NAME. When GNU parallel is not available, we run the tests in sequence, just as before. If GNU parallel is available and you don't like the default of running one subtest per core, you can invoke "make J=1 check" to run only one test at a time. Beware: this will take a long time, and it starts with the two longest-running tests, so you will wait for a long time before seeing any results. Instead, if you want to use fewer resources but still see useful progress, try "make J=60% check". That will attempt to ensure that 60% of the cores are occupied by test runs. To watch progress of individual tests (duration, success (PASS-or-FAIL), name), run "make watch-log" in the same directory from another window. That will start with something like this: and when complete should show numbers/names like this: Every 0.1s: sort -k7,7nr -k4,4gr LOG|perl -n -e '@a=split("\t",$_,-1); $t=$a[8]; $t =~ s,^\./,,;' -e '$t =~ s, >.*,,; chomp $t;' -e '$t =~ /.*--gtest_filter=... Wed Apr 1 10:51:42 2015 152.221 PASS t/DBTest.FileCreationRandomFailure 109.280 PASS t/DBTest.EncodeDecompressedBlockSizeTest 82.315 PASS reduce_levels_test 77.812 PASS t/DBTest.CompactionFilterWithValueChange 73.236 PASS backupable_db_test 63.428 PASS deletefile_test 57.248 PASS table_test 55.665 PASS prefix_test 49.816 PASS t/DBTest.RateLimitingTest ... Test Plan: Timings (measured so as to exclude compile and link times): With this change, all tests complete in 2m40s on a system for which nproc prints 32. Prior to this this change, "make check" would take 24.5 minutes on that same system. Here are durations (in seconds) of the longest-running subtests: 152.435 PASS t/DBTest.FileCreationRandomFailure 107.070 PASS t/DBTest.EncodeDecompressedBlockSizeTest 81.391 PASS ./reduce_levels_test 71.587 PASS ./backupable_db_test 61.746 PASS ./deletefile_test 57.960 PASS ./table_test 55.230 PASS ./prefix_test 54.060 PASS t/DBTest.CompactionFilterWithValueChange 48.873 PASS t/DBTest.RateLimitingTest 47.569 PASS ./fault_injection_test 46.593 PASS t/DBTest.Randomized 42.662 PASS t/DBTest.CompactionFilter 31.793 PASS t/DBTest.SparseMerge 30.612 PASS t/DBTest.CompactionFilterV2 25.891 PASS t/DBTest.GroupCommitTest 23.863 PASS t/DBTest.DynamicLevelMaxBytesBase 22.976 PASS ./rate_limiter_test 18.942 PASS t/DBTest.OptimizeFiltersForHits 16.851 PASS ./env_test 15.399 PASS t/DBTest.CompactionFilterV2WithValueChange 14.827 PASS t/DBTest.CompactionFilterV2NULLPrefix Reviewers: igor, sdong, rven, yhchiang, igor.sugak Reviewed By: igor.sugak Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D35379
10 years ago
ifneq ($(T),)
# Run all tests in parallel, accumulating per-test logs in t/log-*.
# t_sanitized is each $(T) with "-" in place of each "/".
t_sanitized = $(subst /,-,$(T))
# t_run is each sanitized name with a leading "t/".
t_run = $(patsubst %,t/%,$(t_sanitized))
# Each t_run file is a tiny generated bourne shell script
# that invokes one of db_tests's sub-tests. Why use a file
# for this? Because that makes the invocation of parallel
# below simpler, which in turn makes the parsing of parallel's
# LOG simpler (the latter is for live monitoring as parallel
# tests run).
filter = --gtest_filter=$(subst -,/,$(@F))
$(t_run): Makefile db_test
$(AM_V_GEN)mkdir -p t
$(AM_V_at)rm -f $@ $@-t
$(AM_V_at)printf '%s\n' \
'#!/bin/sh' \
'd=$(TMPD)/$(@F)' \
'mkdir -p $$d' \
'TEST_TMPDIR=$$d ./db_test $(filter)' \
> $@-t
$(AM_V_at)chmod a=rx $@-t
$(AM_V_at)mv $@-t $@
run 'make check's rules (and even subtests) in parallel Summary: When GNU parallel is available, "make check" tests are now run in parallel. When /dev/shm is usable, we tell those tests to create temporary files therein. Now, the longest-running single test, db_test, (which is composed of hundreds of sub-tests) is no longer run sequentially: instead, each of its sub-tests is run independently, and can be parallelized along with all other tests. To make that process easier, this change creates a temporary directory, "t/", in which it puts a small script for each of those subtests. The output from each parallel-run test is now saved in t/log-TEST_NAME. When GNU parallel is not available, we run the tests in sequence, just as before. If GNU parallel is available and you don't like the default of running one subtest per core, you can invoke "make J=1 check" to run only one test at a time. Beware: this will take a long time, and it starts with the two longest-running tests, so you will wait for a long time before seeing any results. Instead, if you want to use fewer resources but still see useful progress, try "make J=60% check". That will attempt to ensure that 60% of the cores are occupied by test runs. To watch progress of individual tests (duration, success (PASS-or-FAIL), name), run "make watch-log" in the same directory from another window. That will start with something like this: and when complete should show numbers/names like this: Every 0.1s: sort -k7,7nr -k4,4gr LOG|perl -n -e '@a=split("\t",$_,-1); $t=$a[8]; $t =~ s,^\./,,;' -e '$t =~ s, >.*,,; chomp $t;' -e '$t =~ /.*--gtest_filter=... Wed Apr 1 10:51:42 2015 152.221 PASS t/DBTest.FileCreationRandomFailure 109.280 PASS t/DBTest.EncodeDecompressedBlockSizeTest 82.315 PASS reduce_levels_test 77.812 PASS t/DBTest.CompactionFilterWithValueChange 73.236 PASS backupable_db_test 63.428 PASS deletefile_test 57.248 PASS table_test 55.665 PASS prefix_test 49.816 PASS t/DBTest.RateLimitingTest ... Test Plan: Timings (measured so as to exclude compile and link times): With this change, all tests complete in 2m40s on a system for which nproc prints 32. Prior to this this change, "make check" would take 24.5 minutes on that same system. Here are durations (in seconds) of the longest-running subtests: 152.435 PASS t/DBTest.FileCreationRandomFailure 107.070 PASS t/DBTest.EncodeDecompressedBlockSizeTest 81.391 PASS ./reduce_levels_test 71.587 PASS ./backupable_db_test 61.746 PASS ./deletefile_test 57.960 PASS ./table_test 55.230 PASS ./prefix_test 54.060 PASS t/DBTest.CompactionFilterWithValueChange 48.873 PASS t/DBTest.RateLimitingTest 47.569 PASS ./fault_injection_test 46.593 PASS t/DBTest.Randomized 42.662 PASS t/DBTest.CompactionFilter 31.793 PASS t/DBTest.SparseMerge 30.612 PASS t/DBTest.CompactionFilterV2 25.891 PASS t/DBTest.GroupCommitTest 23.863 PASS t/DBTest.DynamicLevelMaxBytesBase 22.976 PASS ./rate_limiter_test 18.942 PASS t/DBTest.OptimizeFiltersForHits 16.851 PASS ./env_test 15.399 PASS t/DBTest.CompactionFilterV2WithValueChange 14.827 PASS t/DBTest.CompactionFilterV2NULLPrefix Reviewers: igor, sdong, rven, yhchiang, igor.sugak Reviewed By: igor.sugak Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D35379
10 years ago
# Reorder input lines (which are one per test) so that the
# longest-running tests appear first in the output.
# Do this by prefixing each selected name with its duration,
# sort the resulting names, and remove the leading numbers.
# FIXME: the "100" we prepend is a fake time, for now.
# FIXME: squirrel away timings from each run and use them
# (when present) on subsequent runs to order these tests.
#
# Without this reordering, these two tests would happen to start only
# after almost all other tests had completed, thus adding 100 seconds
# to the duration of parallel "make check". That's the difference
# between 4 minutes (old) and 2m20s (new).
#
# 152.120 PASS t/DBTest.FileCreationRandomFailure
# 107.816 PASS t/DBTest.EncodeDecompressedBlockSizeTest
#
slow_test_regexp = \
^t/DBTest\.(?:FileCreationRandomFailure|EncodeDecompressedBlockSizeTest)$$
run 'make check's rules (and even subtests) in parallel Summary: When GNU parallel is available, "make check" tests are now run in parallel. When /dev/shm is usable, we tell those tests to create temporary files therein. Now, the longest-running single test, db_test, (which is composed of hundreds of sub-tests) is no longer run sequentially: instead, each of its sub-tests is run independently, and can be parallelized along with all other tests. To make that process easier, this change creates a temporary directory, "t/", in which it puts a small script for each of those subtests. The output from each parallel-run test is now saved in t/log-TEST_NAME. When GNU parallel is not available, we run the tests in sequence, just as before. If GNU parallel is available and you don't like the default of running one subtest per core, you can invoke "make J=1 check" to run only one test at a time. Beware: this will take a long time, and it starts with the two longest-running tests, so you will wait for a long time before seeing any results. Instead, if you want to use fewer resources but still see useful progress, try "make J=60% check". That will attempt to ensure that 60% of the cores are occupied by test runs. To watch progress of individual tests (duration, success (PASS-or-FAIL), name), run "make watch-log" in the same directory from another window. That will start with something like this: and when complete should show numbers/names like this: Every 0.1s: sort -k7,7nr -k4,4gr LOG|perl -n -e '@a=split("\t",$_,-1); $t=$a[8]; $t =~ s,^\./,,;' -e '$t =~ s, >.*,,; chomp $t;' -e '$t =~ /.*--gtest_filter=... Wed Apr 1 10:51:42 2015 152.221 PASS t/DBTest.FileCreationRandomFailure 109.280 PASS t/DBTest.EncodeDecompressedBlockSizeTest 82.315 PASS reduce_levels_test 77.812 PASS t/DBTest.CompactionFilterWithValueChange 73.236 PASS backupable_db_test 63.428 PASS deletefile_test 57.248 PASS table_test 55.665 PASS prefix_test 49.816 PASS t/DBTest.RateLimitingTest ... Test Plan: Timings (measured so as to exclude compile and link times): With this change, all tests complete in 2m40s on a system for which nproc prints 32. Prior to this this change, "make check" would take 24.5 minutes on that same system. Here are durations (in seconds) of the longest-running subtests: 152.435 PASS t/DBTest.FileCreationRandomFailure 107.070 PASS t/DBTest.EncodeDecompressedBlockSizeTest 81.391 PASS ./reduce_levels_test 71.587 PASS ./backupable_db_test 61.746 PASS ./deletefile_test 57.960 PASS ./table_test 55.230 PASS ./prefix_test 54.060 PASS t/DBTest.CompactionFilterWithValueChange 48.873 PASS t/DBTest.RateLimitingTest 47.569 PASS ./fault_injection_test 46.593 PASS t/DBTest.Randomized 42.662 PASS t/DBTest.CompactionFilter 31.793 PASS t/DBTest.SparseMerge 30.612 PASS t/DBTest.CompactionFilterV2 25.891 PASS t/DBTest.GroupCommitTest 23.863 PASS t/DBTest.DynamicLevelMaxBytesBase 22.976 PASS ./rate_limiter_test 18.942 PASS t/DBTest.OptimizeFiltersForHits 16.851 PASS ./env_test 15.399 PASS t/DBTest.CompactionFilterV2WithValueChange 14.827 PASS t/DBTest.CompactionFilterV2NULLPrefix Reviewers: igor, sdong, rven, yhchiang, igor.sugak Reviewed By: igor.sugak Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D35379
10 years ago
prioritize_long_running_tests = \
perl -pe 's,($(slow_test_regexp)),100 $$1,' \
| sort -k1,1gr \
| sed 's/^[.0-9]* //'
run 'make check's rules (and even subtests) in parallel Summary: When GNU parallel is available, "make check" tests are now run in parallel. When /dev/shm is usable, we tell those tests to create temporary files therein. Now, the longest-running single test, db_test, (which is composed of hundreds of sub-tests) is no longer run sequentially: instead, each of its sub-tests is run independently, and can be parallelized along with all other tests. To make that process easier, this change creates a temporary directory, "t/", in which it puts a small script for each of those subtests. The output from each parallel-run test is now saved in t/log-TEST_NAME. When GNU parallel is not available, we run the tests in sequence, just as before. If GNU parallel is available and you don't like the default of running one subtest per core, you can invoke "make J=1 check" to run only one test at a time. Beware: this will take a long time, and it starts with the two longest-running tests, so you will wait for a long time before seeing any results. Instead, if you want to use fewer resources but still see useful progress, try "make J=60% check". That will attempt to ensure that 60% of the cores are occupied by test runs. To watch progress of individual tests (duration, success (PASS-or-FAIL), name), run "make watch-log" in the same directory from another window. That will start with something like this: and when complete should show numbers/names like this: Every 0.1s: sort -k7,7nr -k4,4gr LOG|perl -n -e '@a=split("\t",$_,-1); $t=$a[8]; $t =~ s,^\./,,;' -e '$t =~ s, >.*,,; chomp $t;' -e '$t =~ /.*--gtest_filter=... Wed Apr 1 10:51:42 2015 152.221 PASS t/DBTest.FileCreationRandomFailure 109.280 PASS t/DBTest.EncodeDecompressedBlockSizeTest 82.315 PASS reduce_levels_test 77.812 PASS t/DBTest.CompactionFilterWithValueChange 73.236 PASS backupable_db_test 63.428 PASS deletefile_test 57.248 PASS table_test 55.665 PASS prefix_test 49.816 PASS t/DBTest.RateLimitingTest ... Test Plan: Timings (measured so as to exclude compile and link times): With this change, all tests complete in 2m40s on a system for which nproc prints 32. Prior to this this change, "make check" would take 24.5 minutes on that same system. Here are durations (in seconds) of the longest-running subtests: 152.435 PASS t/DBTest.FileCreationRandomFailure 107.070 PASS t/DBTest.EncodeDecompressedBlockSizeTest 81.391 PASS ./reduce_levels_test 71.587 PASS ./backupable_db_test 61.746 PASS ./deletefile_test 57.960 PASS ./table_test 55.230 PASS ./prefix_test 54.060 PASS t/DBTest.CompactionFilterWithValueChange 48.873 PASS t/DBTest.RateLimitingTest 47.569 PASS ./fault_injection_test 46.593 PASS t/DBTest.Randomized 42.662 PASS t/DBTest.CompactionFilter 31.793 PASS t/DBTest.SparseMerge 30.612 PASS t/DBTest.CompactionFilterV2 25.891 PASS t/DBTest.GroupCommitTest 23.863 PASS t/DBTest.DynamicLevelMaxBytesBase 22.976 PASS ./rate_limiter_test 18.942 PASS t/DBTest.OptimizeFiltersForHits 16.851 PASS ./env_test 15.399 PASS t/DBTest.CompactionFilterV2WithValueChange 14.827 PASS t/DBTest.CompactionFilterV2NULLPrefix Reviewers: igor, sdong, rven, yhchiang, igor.sugak Reviewed By: igor.sugak Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D35379
10 years ago
# "make check" uses
# Run with "make J=1 check" to disable parallelism in "make check".
# Run with "make J=200% check" to run two parallel jobs per core.
# The default is to run one job per core (J=100%).
# See "man parallel" for its "-j ..." option.
J = 100%
# Use this regexp to select the subset of tests whose names match.
tests-regexp = .
run 'make check's rules (and even subtests) in parallel Summary: When GNU parallel is available, "make check" tests are now run in parallel. When /dev/shm is usable, we tell those tests to create temporary files therein. Now, the longest-running single test, db_test, (which is composed of hundreds of sub-tests) is no longer run sequentially: instead, each of its sub-tests is run independently, and can be parallelized along with all other tests. To make that process easier, this change creates a temporary directory, "t/", in which it puts a small script for each of those subtests. The output from each parallel-run test is now saved in t/log-TEST_NAME. When GNU parallel is not available, we run the tests in sequence, just as before. If GNU parallel is available and you don't like the default of running one subtest per core, you can invoke "make J=1 check" to run only one test at a time. Beware: this will take a long time, and it starts with the two longest-running tests, so you will wait for a long time before seeing any results. Instead, if you want to use fewer resources but still see useful progress, try "make J=60% check". That will attempt to ensure that 60% of the cores are occupied by test runs. To watch progress of individual tests (duration, success (PASS-or-FAIL), name), run "make watch-log" in the same directory from another window. That will start with something like this: and when complete should show numbers/names like this: Every 0.1s: sort -k7,7nr -k4,4gr LOG|perl -n -e '@a=split("\t",$_,-1); $t=$a[8]; $t =~ s,^\./,,;' -e '$t =~ s, >.*,,; chomp $t;' -e '$t =~ /.*--gtest_filter=... Wed Apr 1 10:51:42 2015 152.221 PASS t/DBTest.FileCreationRandomFailure 109.280 PASS t/DBTest.EncodeDecompressedBlockSizeTest 82.315 PASS reduce_levels_test 77.812 PASS t/DBTest.CompactionFilterWithValueChange 73.236 PASS backupable_db_test 63.428 PASS deletefile_test 57.248 PASS table_test 55.665 PASS prefix_test 49.816 PASS t/DBTest.RateLimitingTest ... Test Plan: Timings (measured so as to exclude compile and link times): With this change, all tests complete in 2m40s on a system for which nproc prints 32. Prior to this this change, "make check" would take 24.5 minutes on that same system. Here are durations (in seconds) of the longest-running subtests: 152.435 PASS t/DBTest.FileCreationRandomFailure 107.070 PASS t/DBTest.EncodeDecompressedBlockSizeTest 81.391 PASS ./reduce_levels_test 71.587 PASS ./backupable_db_test 61.746 PASS ./deletefile_test 57.960 PASS ./table_test 55.230 PASS ./prefix_test 54.060 PASS t/DBTest.CompactionFilterWithValueChange 48.873 PASS t/DBTest.RateLimitingTest 47.569 PASS ./fault_injection_test 46.593 PASS t/DBTest.Randomized 42.662 PASS t/DBTest.CompactionFilter 31.793 PASS t/DBTest.SparseMerge 30.612 PASS t/DBTest.CompactionFilterV2 25.891 PASS t/DBTest.GroupCommitTest 23.863 PASS t/DBTest.DynamicLevelMaxBytesBase 22.976 PASS ./rate_limiter_test 18.942 PASS t/DBTest.OptimizeFiltersForHits 16.851 PASS ./env_test 15.399 PASS t/DBTest.CompactionFilterV2WithValueChange 14.827 PASS t/DBTest.CompactionFilterV2NULLPrefix Reviewers: igor, sdong, rven, yhchiang, igor.sugak Reviewed By: igor.sugak Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D35379
10 years ago
.PHONY: check_0
check_0: $(t_run)
$(AM_V_GEN)export TEST_TMPDIR=$(TMPD); \
printf '%s\n' '' \
'To monitor subtest <duration,pass/fail,name>,' \
' run "make watch-log" in a separate window' ''; \
test -t 1 && eta=--eta || eta=; \
{ \
printf './%s\n' $(filter-out db_test, $(TESTS)); \
printf '%s\n' $(t_run); \
} \
| $(prioritize_long_running_tests) \
| grep -E '$(tests-regexp)' \
| parallel -j$(J) --joblog=LOG $$eta --gnu '{} >& t/log-{/}'
run 'make check's rules (and even subtests) in parallel Summary: When GNU parallel is available, "make check" tests are now run in parallel. When /dev/shm is usable, we tell those tests to create temporary files therein. Now, the longest-running single test, db_test, (which is composed of hundreds of sub-tests) is no longer run sequentially: instead, each of its sub-tests is run independently, and can be parallelized along with all other tests. To make that process easier, this change creates a temporary directory, "t/", in which it puts a small script for each of those subtests. The output from each parallel-run test is now saved in t/log-TEST_NAME. When GNU parallel is not available, we run the tests in sequence, just as before. If GNU parallel is available and you don't like the default of running one subtest per core, you can invoke "make J=1 check" to run only one test at a time. Beware: this will take a long time, and it starts with the two longest-running tests, so you will wait for a long time before seeing any results. Instead, if you want to use fewer resources but still see useful progress, try "make J=60% check". That will attempt to ensure that 60% of the cores are occupied by test runs. To watch progress of individual tests (duration, success (PASS-or-FAIL), name), run "make watch-log" in the same directory from another window. That will start with something like this: and when complete should show numbers/names like this: Every 0.1s: sort -k7,7nr -k4,4gr LOG|perl -n -e '@a=split("\t",$_,-1); $t=$a[8]; $t =~ s,^\./,,;' -e '$t =~ s, >.*,,; chomp $t;' -e '$t =~ /.*--gtest_filter=... Wed Apr 1 10:51:42 2015 152.221 PASS t/DBTest.FileCreationRandomFailure 109.280 PASS t/DBTest.EncodeDecompressedBlockSizeTest 82.315 PASS reduce_levels_test 77.812 PASS t/DBTest.CompactionFilterWithValueChange 73.236 PASS backupable_db_test 63.428 PASS deletefile_test 57.248 PASS table_test 55.665 PASS prefix_test 49.816 PASS t/DBTest.RateLimitingTest ... Test Plan: Timings (measured so as to exclude compile and link times): With this change, all tests complete in 2m40s on a system for which nproc prints 32. Prior to this this change, "make check" would take 24.5 minutes on that same system. Here are durations (in seconds) of the longest-running subtests: 152.435 PASS t/DBTest.FileCreationRandomFailure 107.070 PASS t/DBTest.EncodeDecompressedBlockSizeTest 81.391 PASS ./reduce_levels_test 71.587 PASS ./backupable_db_test 61.746 PASS ./deletefile_test 57.960 PASS ./table_test 55.230 PASS ./prefix_test 54.060 PASS t/DBTest.CompactionFilterWithValueChange 48.873 PASS t/DBTest.RateLimitingTest 47.569 PASS ./fault_injection_test 46.593 PASS t/DBTest.Randomized 42.662 PASS t/DBTest.CompactionFilter 31.793 PASS t/DBTest.SparseMerge 30.612 PASS t/DBTest.CompactionFilterV2 25.891 PASS t/DBTest.GroupCommitTest 23.863 PASS t/DBTest.DynamicLevelMaxBytesBase 22.976 PASS ./rate_limiter_test 18.942 PASS t/DBTest.OptimizeFiltersForHits 16.851 PASS ./env_test 15.399 PASS t/DBTest.CompactionFilterV2WithValueChange 14.827 PASS t/DBTest.CompactionFilterV2NULLPrefix Reviewers: igor, sdong, rven, yhchiang, igor.sugak Reviewed By: igor.sugak Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D35379
10 years ago
endif
CLEAN_FILES += t LOG $(TMPD)
run 'make check's rules (and even subtests) in parallel Summary: When GNU parallel is available, "make check" tests are now run in parallel. When /dev/shm is usable, we tell those tests to create temporary files therein. Now, the longest-running single test, db_test, (which is composed of hundreds of sub-tests) is no longer run sequentially: instead, each of its sub-tests is run independently, and can be parallelized along with all other tests. To make that process easier, this change creates a temporary directory, "t/", in which it puts a small script for each of those subtests. The output from each parallel-run test is now saved in t/log-TEST_NAME. When GNU parallel is not available, we run the tests in sequence, just as before. If GNU parallel is available and you don't like the default of running one subtest per core, you can invoke "make J=1 check" to run only one test at a time. Beware: this will take a long time, and it starts with the two longest-running tests, so you will wait for a long time before seeing any results. Instead, if you want to use fewer resources but still see useful progress, try "make J=60% check". That will attempt to ensure that 60% of the cores are occupied by test runs. To watch progress of individual tests (duration, success (PASS-or-FAIL), name), run "make watch-log" in the same directory from another window. That will start with something like this: and when complete should show numbers/names like this: Every 0.1s: sort -k7,7nr -k4,4gr LOG|perl -n -e '@a=split("\t",$_,-1); $t=$a[8]; $t =~ s,^\./,,;' -e '$t =~ s, >.*,,; chomp $t;' -e '$t =~ /.*--gtest_filter=... Wed Apr 1 10:51:42 2015 152.221 PASS t/DBTest.FileCreationRandomFailure 109.280 PASS t/DBTest.EncodeDecompressedBlockSizeTest 82.315 PASS reduce_levels_test 77.812 PASS t/DBTest.CompactionFilterWithValueChange 73.236 PASS backupable_db_test 63.428 PASS deletefile_test 57.248 PASS table_test 55.665 PASS prefix_test 49.816 PASS t/DBTest.RateLimitingTest ... Test Plan: Timings (measured so as to exclude compile and link times): With this change, all tests complete in 2m40s on a system for which nproc prints 32. Prior to this this change, "make check" would take 24.5 minutes on that same system. Here are durations (in seconds) of the longest-running subtests: 152.435 PASS t/DBTest.FileCreationRandomFailure 107.070 PASS t/DBTest.EncodeDecompressedBlockSizeTest 81.391 PASS ./reduce_levels_test 71.587 PASS ./backupable_db_test 61.746 PASS ./deletefile_test 57.960 PASS ./table_test 55.230 PASS ./prefix_test 54.060 PASS t/DBTest.CompactionFilterWithValueChange 48.873 PASS t/DBTest.RateLimitingTest 47.569 PASS ./fault_injection_test 46.593 PASS t/DBTest.Randomized 42.662 PASS t/DBTest.CompactionFilter 31.793 PASS t/DBTest.SparseMerge 30.612 PASS t/DBTest.CompactionFilterV2 25.891 PASS t/DBTest.GroupCommitTest 23.863 PASS t/DBTest.DynamicLevelMaxBytesBase 22.976 PASS ./rate_limiter_test 18.942 PASS t/DBTest.OptimizeFiltersForHits 16.851 PASS ./env_test 15.399 PASS t/DBTest.CompactionFilterV2WithValueChange 14.827 PASS t/DBTest.CompactionFilterV2NULLPrefix Reviewers: igor, sdong, rven, yhchiang, igor.sugak Reviewed By: igor.sugak Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D35379
10 years ago
# When running parallel "make check", you can monitor its progress
# from another window.
# Run "make watch_LOG" to show the duration,PASS/FAIL,name of parallel
# tests as they are being run. We sort them so that longer-running ones
# appear at the top of the list and any failing tests remain at the top
# regardless of their duration. As with any use of "watch", hit ^C to
# interrupt.
watch-log:
watch --interval=0 'sort -k7,7nr -k4,4gr LOG|$(quoted_perl_command)'
run 'make check's rules (and even subtests) in parallel Summary: When GNU parallel is available, "make check" tests are now run in parallel. When /dev/shm is usable, we tell those tests to create temporary files therein. Now, the longest-running single test, db_test, (which is composed of hundreds of sub-tests) is no longer run sequentially: instead, each of its sub-tests is run independently, and can be parallelized along with all other tests. To make that process easier, this change creates a temporary directory, "t/", in which it puts a small script for each of those subtests. The output from each parallel-run test is now saved in t/log-TEST_NAME. When GNU parallel is not available, we run the tests in sequence, just as before. If GNU parallel is available and you don't like the default of running one subtest per core, you can invoke "make J=1 check" to run only one test at a time. Beware: this will take a long time, and it starts with the two longest-running tests, so you will wait for a long time before seeing any results. Instead, if you want to use fewer resources but still see useful progress, try "make J=60% check". That will attempt to ensure that 60% of the cores are occupied by test runs. To watch progress of individual tests (duration, success (PASS-or-FAIL), name), run "make watch-log" in the same directory from another window. That will start with something like this: and when complete should show numbers/names like this: Every 0.1s: sort -k7,7nr -k4,4gr LOG|perl -n -e '@a=split("\t",$_,-1); $t=$a[8]; $t =~ s,^\./,,;' -e '$t =~ s, >.*,,; chomp $t;' -e '$t =~ /.*--gtest_filter=... Wed Apr 1 10:51:42 2015 152.221 PASS t/DBTest.FileCreationRandomFailure 109.280 PASS t/DBTest.EncodeDecompressedBlockSizeTest 82.315 PASS reduce_levels_test 77.812 PASS t/DBTest.CompactionFilterWithValueChange 73.236 PASS backupable_db_test 63.428 PASS deletefile_test 57.248 PASS table_test 55.665 PASS prefix_test 49.816 PASS t/DBTest.RateLimitingTest ... Test Plan: Timings (measured so as to exclude compile and link times): With this change, all tests complete in 2m40s on a system for which nproc prints 32. Prior to this this change, "make check" would take 24.5 minutes on that same system. Here are durations (in seconds) of the longest-running subtests: 152.435 PASS t/DBTest.FileCreationRandomFailure 107.070 PASS t/DBTest.EncodeDecompressedBlockSizeTest 81.391 PASS ./reduce_levels_test 71.587 PASS ./backupable_db_test 61.746 PASS ./deletefile_test 57.960 PASS ./table_test 55.230 PASS ./prefix_test 54.060 PASS t/DBTest.CompactionFilterWithValueChange 48.873 PASS t/DBTest.RateLimitingTest 47.569 PASS ./fault_injection_test 46.593 PASS t/DBTest.Randomized 42.662 PASS t/DBTest.CompactionFilter 31.793 PASS t/DBTest.SparseMerge 30.612 PASS t/DBTest.CompactionFilterV2 25.891 PASS t/DBTest.GroupCommitTest 23.863 PASS t/DBTest.DynamicLevelMaxBytesBase 22.976 PASS ./rate_limiter_test 18.942 PASS t/DBTest.OptimizeFiltersForHits 16.851 PASS ./env_test 15.399 PASS t/DBTest.CompactionFilterV2WithValueChange 14.827 PASS t/DBTest.CompactionFilterV2NULLPrefix Reviewers: igor, sdong, rven, yhchiang, igor.sugak Reviewed By: igor.sugak Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D35379
10 years ago
# If J != 1 and GNU parallel is installed, run the tests in parallel,
run 'make check's rules (and even subtests) in parallel Summary: When GNU parallel is available, "make check" tests are now run in parallel. When /dev/shm is usable, we tell those tests to create temporary files therein. Now, the longest-running single test, db_test, (which is composed of hundreds of sub-tests) is no longer run sequentially: instead, each of its sub-tests is run independently, and can be parallelized along with all other tests. To make that process easier, this change creates a temporary directory, "t/", in which it puts a small script for each of those subtests. The output from each parallel-run test is now saved in t/log-TEST_NAME. When GNU parallel is not available, we run the tests in sequence, just as before. If GNU parallel is available and you don't like the default of running one subtest per core, you can invoke "make J=1 check" to run only one test at a time. Beware: this will take a long time, and it starts with the two longest-running tests, so you will wait for a long time before seeing any results. Instead, if you want to use fewer resources but still see useful progress, try "make J=60% check". That will attempt to ensure that 60% of the cores are occupied by test runs. To watch progress of individual tests (duration, success (PASS-or-FAIL), name), run "make watch-log" in the same directory from another window. That will start with something like this: and when complete should show numbers/names like this: Every 0.1s: sort -k7,7nr -k4,4gr LOG|perl -n -e '@a=split("\t",$_,-1); $t=$a[8]; $t =~ s,^\./,,;' -e '$t =~ s, >.*,,; chomp $t;' -e '$t =~ /.*--gtest_filter=... Wed Apr 1 10:51:42 2015 152.221 PASS t/DBTest.FileCreationRandomFailure 109.280 PASS t/DBTest.EncodeDecompressedBlockSizeTest 82.315 PASS reduce_levels_test 77.812 PASS t/DBTest.CompactionFilterWithValueChange 73.236 PASS backupable_db_test 63.428 PASS deletefile_test 57.248 PASS table_test 55.665 PASS prefix_test 49.816 PASS t/DBTest.RateLimitingTest ... Test Plan: Timings (measured so as to exclude compile and link times): With this change, all tests complete in 2m40s on a system for which nproc prints 32. Prior to this this change, "make check" would take 24.5 minutes on that same system. Here are durations (in seconds) of the longest-running subtests: 152.435 PASS t/DBTest.FileCreationRandomFailure 107.070 PASS t/DBTest.EncodeDecompressedBlockSizeTest 81.391 PASS ./reduce_levels_test 71.587 PASS ./backupable_db_test 61.746 PASS ./deletefile_test 57.960 PASS ./table_test 55.230 PASS ./prefix_test 54.060 PASS t/DBTest.CompactionFilterWithValueChange 48.873 PASS t/DBTest.RateLimitingTest 47.569 PASS ./fault_injection_test 46.593 PASS t/DBTest.Randomized 42.662 PASS t/DBTest.CompactionFilter 31.793 PASS t/DBTest.SparseMerge 30.612 PASS t/DBTest.CompactionFilterV2 25.891 PASS t/DBTest.GroupCommitTest 23.863 PASS t/DBTest.DynamicLevelMaxBytesBase 22.976 PASS ./rate_limiter_test 18.942 PASS t/DBTest.OptimizeFiltersForHits 16.851 PASS ./env_test 15.399 PASS t/DBTest.CompactionFilterV2WithValueChange 14.827 PASS t/DBTest.CompactionFilterV2NULLPrefix Reviewers: igor, sdong, rven, yhchiang, igor.sugak Reviewed By: igor.sugak Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D35379
10 years ago
# via the check_0 rule above. Otherwise, run them sequentially.
check: all
$(AM_V_GEN)if test "$(J)" != 1 \
&& (parallel --gnu --help 2>/dev/null) | \
grep -q 'GNU Parallel'; \
then \
t=$$($(test_names)); \
$(MAKE) T="$$t" TMPD=$(TMPD) check_0; \
else \
for t in $(TESTS); do \
echo "===== Running $$t"; ./$$t || exit 1; done; \
fi
rm -rf $(TMPD)
python tools/ldb_test.py
sh tools/rocksdb_dump_test.sh
run 'make check's rules (and even subtests) in parallel Summary: When GNU parallel is available, "make check" tests are now run in parallel. When /dev/shm is usable, we tell those tests to create temporary files therein. Now, the longest-running single test, db_test, (which is composed of hundreds of sub-tests) is no longer run sequentially: instead, each of its sub-tests is run independently, and can be parallelized along with all other tests. To make that process easier, this change creates a temporary directory, "t/", in which it puts a small script for each of those subtests. The output from each parallel-run test is now saved in t/log-TEST_NAME. When GNU parallel is not available, we run the tests in sequence, just as before. If GNU parallel is available and you don't like the default of running one subtest per core, you can invoke "make J=1 check" to run only one test at a time. Beware: this will take a long time, and it starts with the two longest-running tests, so you will wait for a long time before seeing any results. Instead, if you want to use fewer resources but still see useful progress, try "make J=60% check". That will attempt to ensure that 60% of the cores are occupied by test runs. To watch progress of individual tests (duration, success (PASS-or-FAIL), name), run "make watch-log" in the same directory from another window. That will start with something like this: and when complete should show numbers/names like this: Every 0.1s: sort -k7,7nr -k4,4gr LOG|perl -n -e '@a=split("\t",$_,-1); $t=$a[8]; $t =~ s,^\./,,;' -e '$t =~ s, >.*,,; chomp $t;' -e '$t =~ /.*--gtest_filter=... Wed Apr 1 10:51:42 2015 152.221 PASS t/DBTest.FileCreationRandomFailure 109.280 PASS t/DBTest.EncodeDecompressedBlockSizeTest 82.315 PASS reduce_levels_test 77.812 PASS t/DBTest.CompactionFilterWithValueChange 73.236 PASS backupable_db_test 63.428 PASS deletefile_test 57.248 PASS table_test 55.665 PASS prefix_test 49.816 PASS t/DBTest.RateLimitingTest ... Test Plan: Timings (measured so as to exclude compile and link times): With this change, all tests complete in 2m40s on a system for which nproc prints 32. Prior to this this change, "make check" would take 24.5 minutes on that same system. Here are durations (in seconds) of the longest-running subtests: 152.435 PASS t/DBTest.FileCreationRandomFailure 107.070 PASS t/DBTest.EncodeDecompressedBlockSizeTest 81.391 PASS ./reduce_levels_test 71.587 PASS ./backupable_db_test 61.746 PASS ./deletefile_test 57.960 PASS ./table_test 55.230 PASS ./prefix_test 54.060 PASS t/DBTest.CompactionFilterWithValueChange 48.873 PASS t/DBTest.RateLimitingTest 47.569 PASS ./fault_injection_test 46.593 PASS t/DBTest.Randomized 42.662 PASS t/DBTest.CompactionFilter 31.793 PASS t/DBTest.SparseMerge 30.612 PASS t/DBTest.CompactionFilterV2 25.891 PASS t/DBTest.GroupCommitTest 23.863 PASS t/DBTest.DynamicLevelMaxBytesBase 22.976 PASS ./rate_limiter_test 18.942 PASS t/DBTest.OptimizeFiltersForHits 16.851 PASS ./env_test 15.399 PASS t/DBTest.CompactionFilterV2WithValueChange 14.827 PASS t/DBTest.CompactionFilterV2NULLPrefix Reviewers: igor, sdong, rven, yhchiang, igor.sugak Reviewed By: igor.sugak Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D35379
10 years ago
check_some: $(SUBSET) ldb_tests
for t in $(SUBSET); do echo "===== Running $$t"; ./$$t || exit 1; done
run 'make check's rules (and even subtests) in parallel Summary: When GNU parallel is available, "make check" tests are now run in parallel. When /dev/shm is usable, we tell those tests to create temporary files therein. Now, the longest-running single test, db_test, (which is composed of hundreds of sub-tests) is no longer run sequentially: instead, each of its sub-tests is run independently, and can be parallelized along with all other tests. To make that process easier, this change creates a temporary directory, "t/", in which it puts a small script for each of those subtests. The output from each parallel-run test is now saved in t/log-TEST_NAME. When GNU parallel is not available, we run the tests in sequence, just as before. If GNU parallel is available and you don't like the default of running one subtest per core, you can invoke "make J=1 check" to run only one test at a time. Beware: this will take a long time, and it starts with the two longest-running tests, so you will wait for a long time before seeing any results. Instead, if you want to use fewer resources but still see useful progress, try "make J=60% check". That will attempt to ensure that 60% of the cores are occupied by test runs. To watch progress of individual tests (duration, success (PASS-or-FAIL), name), run "make watch-log" in the same directory from another window. That will start with something like this: and when complete should show numbers/names like this: Every 0.1s: sort -k7,7nr -k4,4gr LOG|perl -n -e '@a=split("\t",$_,-1); $t=$a[8]; $t =~ s,^\./,,;' -e '$t =~ s, >.*,,; chomp $t;' -e '$t =~ /.*--gtest_filter=... Wed Apr 1 10:51:42 2015 152.221 PASS t/DBTest.FileCreationRandomFailure 109.280 PASS t/DBTest.EncodeDecompressedBlockSizeTest 82.315 PASS reduce_levels_test 77.812 PASS t/DBTest.CompactionFilterWithValueChange 73.236 PASS backupable_db_test 63.428 PASS deletefile_test 57.248 PASS table_test 55.665 PASS prefix_test 49.816 PASS t/DBTest.RateLimitingTest ... Test Plan: Timings (measured so as to exclude compile and link times): With this change, all tests complete in 2m40s on a system for which nproc prints 32. Prior to this this change, "make check" would take 24.5 minutes on that same system. Here are durations (in seconds) of the longest-running subtests: 152.435 PASS t/DBTest.FileCreationRandomFailure 107.070 PASS t/DBTest.EncodeDecompressedBlockSizeTest 81.391 PASS ./reduce_levels_test 71.587 PASS ./backupable_db_test 61.746 PASS ./deletefile_test 57.960 PASS ./table_test 55.230 PASS ./prefix_test 54.060 PASS t/DBTest.CompactionFilterWithValueChange 48.873 PASS t/DBTest.RateLimitingTest 47.569 PASS ./fault_injection_test 46.593 PASS t/DBTest.Randomized 42.662 PASS t/DBTest.CompactionFilter 31.793 PASS t/DBTest.SparseMerge 30.612 PASS t/DBTest.CompactionFilterV2 25.891 PASS t/DBTest.GroupCommitTest 23.863 PASS t/DBTest.DynamicLevelMaxBytesBase 22.976 PASS ./rate_limiter_test 18.942 PASS t/DBTest.OptimizeFiltersForHits 16.851 PASS ./env_test 15.399 PASS t/DBTest.CompactionFilterV2WithValueChange 14.827 PASS t/DBTest.CompactionFilterV2NULLPrefix Reviewers: igor, sdong, rven, yhchiang, igor.sugak Reviewed By: igor.sugak Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D35379
10 years ago
.PHONY: ldb_tests
ldb_tests: ldb
python tools/ldb_test.py
crash_test: whitebox_crash_test blackbox_crash_test
blackbox_crash_test: db_stress
python -u tools/db_crashtest.py -s
python -u tools/db_crashtest.py
whitebox_crash_test: db_stress
python -u tools/db_crashtest2.py -s
python -u tools/db_crashtest2.py
asan_check:
$(MAKE) clean
COMPILE_WITH_ASAN=1 $(MAKE) check -j32
$(MAKE) clean
asan_crash_test:
$(MAKE) clean
COMPILE_WITH_ASAN=1 $(MAKE) crash_test
$(MAKE) clean
valgrind_check: $(TESTS)
for t in $(filter-out skiplist_test,$(TESTS)); do \
$(VALGRIND_VER) $(VALGRIND_OPTS) ./$$t; \
ret_code=$$?; \
if [ $$ret_code -ne 0 ]; then \
exit $$ret_code; \
fi; \
done
analyze: clean
$(CLANG_SCAN_BUILD) --use-analyzer=$(CLANG_ANALYZER) \
--use-c++=$(CXX) --use-cc=$(CC) --status-bugs \
-o $(CURDIR)/scan_build_report \
$(MAKE) dbg
run 'make check's rules (and even subtests) in parallel Summary: When GNU parallel is available, "make check" tests are now run in parallel. When /dev/shm is usable, we tell those tests to create temporary files therein. Now, the longest-running single test, db_test, (which is composed of hundreds of sub-tests) is no longer run sequentially: instead, each of its sub-tests is run independently, and can be parallelized along with all other tests. To make that process easier, this change creates a temporary directory, "t/", in which it puts a small script for each of those subtests. The output from each parallel-run test is now saved in t/log-TEST_NAME. When GNU parallel is not available, we run the tests in sequence, just as before. If GNU parallel is available and you don't like the default of running one subtest per core, you can invoke "make J=1 check" to run only one test at a time. Beware: this will take a long time, and it starts with the two longest-running tests, so you will wait for a long time before seeing any results. Instead, if you want to use fewer resources but still see useful progress, try "make J=60% check". That will attempt to ensure that 60% of the cores are occupied by test runs. To watch progress of individual tests (duration, success (PASS-or-FAIL), name), run "make watch-log" in the same directory from another window. That will start with something like this: and when complete should show numbers/names like this: Every 0.1s: sort -k7,7nr -k4,4gr LOG|perl -n -e '@a=split("\t",$_,-1); $t=$a[8]; $t =~ s,^\./,,;' -e '$t =~ s, >.*,,; chomp $t;' -e '$t =~ /.*--gtest_filter=... Wed Apr 1 10:51:42 2015 152.221 PASS t/DBTest.FileCreationRandomFailure 109.280 PASS t/DBTest.EncodeDecompressedBlockSizeTest 82.315 PASS reduce_levels_test 77.812 PASS t/DBTest.CompactionFilterWithValueChange 73.236 PASS backupable_db_test 63.428 PASS deletefile_test 57.248 PASS table_test 55.665 PASS prefix_test 49.816 PASS t/DBTest.RateLimitingTest ... Test Plan: Timings (measured so as to exclude compile and link times): With this change, all tests complete in 2m40s on a system for which nproc prints 32. Prior to this this change, "make check" would take 24.5 minutes on that same system. Here are durations (in seconds) of the longest-running subtests: 152.435 PASS t/DBTest.FileCreationRandomFailure 107.070 PASS t/DBTest.EncodeDecompressedBlockSizeTest 81.391 PASS ./reduce_levels_test 71.587 PASS ./backupable_db_test 61.746 PASS ./deletefile_test 57.960 PASS ./table_test 55.230 PASS ./prefix_test 54.060 PASS t/DBTest.CompactionFilterWithValueChange 48.873 PASS t/DBTest.RateLimitingTest 47.569 PASS ./fault_injection_test 46.593 PASS t/DBTest.Randomized 42.662 PASS t/DBTest.CompactionFilter 31.793 PASS t/DBTest.SparseMerge 30.612 PASS t/DBTest.CompactionFilterV2 25.891 PASS t/DBTest.GroupCommitTest 23.863 PASS t/DBTest.DynamicLevelMaxBytesBase 22.976 PASS ./rate_limiter_test 18.942 PASS t/DBTest.OptimizeFiltersForHits 16.851 PASS ./env_test 15.399 PASS t/DBTest.CompactionFilterV2WithValueChange 14.827 PASS t/DBTest.CompactionFilterV2NULLPrefix Reviewers: igor, sdong, rven, yhchiang, igor.sugak Reviewed By: igor.sugak Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D35379
10 years ago
CLEAN_FILES += unity.cc
unity.cc: Makefile
rm -f $@ $@-t
for source_file in $(LIB_SOURCES); do \
echo "#include \"$$source_file\"" >> $@-t; \
done
chmod a=r $@-t
mv $@-t $@
unity.a: unity.o
$(AM_V_AR)rm -f $@
$(AM_V_at)$(AR) $(ARFLAGS) $@ unity.o
# try compiling db_test with unity
unity_test: db/db_test.o db/db_test_util.o $(TESTHARNESS) unity.a
$(AM_LINK)
./unity_test
rocksdb.h rocksdb.cc: build_tools/amalgamate.py Makefile $(LIB_SOURCES) unity.cc
build_tools/amalgamate.py -I. -i./include unity.cc -x include/rocksdb/c.h -H rocksdb.h -o rocksdb.cc
clean:
rm -f $(BENCHMARKS) $(TOOLS) $(TESTS) $(LIBRARY) $(SHARED)
rm -rf $(CLEAN_FILES) ios-x86 ios-arm scan_build_report
find . -name "*.[oda]" -exec rm -f {} \;
find . -type f -regex ".*\.\(\(gcda\)\|\(gcno\)\)" -exec rm {} \;
rm -rf bzip2* snappy* zlib* lz4*
tags:
ctags * -R
cscope -b `find . -name '*.cc'` `find . -name '*.h'`
format:
build_tools/format-diff.sh
Package generation for Ubuntu and CentOS Summary: I put together a script to assist in the generation of deb's and rpm's. I've tested that this works on ubuntu via vagrant. I've included the Vagrantfile here, but I can remove it if it's not useful. The package.sh script should work on any ubuntu or centos machine, I just added a bit of logic in there to allow a base Ubuntu or Centos machine to be able to build RocksDB from scratch. Example output on Ubuntu 14.04: ``` root@vagrant-ubuntu-trusty-64:/vagrant# ./tools/package.sh [+] g++-4.7 is already installed. skipping. [+] libgflags-dev is already installed. skipping. [+] ruby-all-dev is already installed. skipping. [+] fpm is already installed. skipping. Created package {:path=>"rocksdb_3.5_amd64.deb"} root@vagrant-ubuntu-trusty-64:/vagrant# dpkg --info rocksdb_3.5_amd64.deb new debian package, version 2.0. size 17392022 bytes: control archive=1518 bytes. 275 bytes, 11 lines control 2911 bytes, 38 lines md5sums Package: rocksdb Version: 3.5 License: BSD Vendor: Facebook Architecture: amd64 Maintainer: rocksdb@fb.com Installed-Size: 83358 Section: default Priority: extra Homepage: http://rocksdb.org/ Description: RocksDB is an embeddable persistent key-value store for fast storage. ``` Example output on CentOS 6.5: ``` [root@localhost vagrant]# rpm -qip rocksdb-3.5-1.x86_64.rpm Name : rocksdb Relocations: /usr Version : 3.5 Vendor: Facebook Release : 1 Build Date: Mon 29 Sep 2014 01:26:11 AM UTC Install Date: (not installed) Build Host: localhost Group : default Source RPM: rocksdb-3.5-1.src.rpm Size : 96231106 License: BSD Signature : (none) Packager : rocksdb@fb.com URL : http://rocksdb.org/ Summary : RocksDB is an embeddable persistent key-value store for fast storage. Description : RocksDB is an embeddable persistent key-value store for fast storage. ``` Test Plan: How this gets used is really up to the RocksDB core team. If you want to actually get this into mainline, you might have to change `make install` such that it install the RocksDB shared object file as well, which would require you to link against gflags (maybe?) and that would require some potential modifications to the script here (basically add a depends on that package). Currently, this will install the headers and a pre-compiled statically linked object file. If that's what you want out of life, than this requires no modifications. Reviewers: ljin, yhchiang, igor Reviewed By: igor Differential Revision: https://reviews.facebook.net/D24141
10 years ago
package:
bash build_tools/make_package.sh $(SHARED_MAJOR).$(SHARED_MINOR)
Package generation for Ubuntu and CentOS Summary: I put together a script to assist in the generation of deb's and rpm's. I've tested that this works on ubuntu via vagrant. I've included the Vagrantfile here, but I can remove it if it's not useful. The package.sh script should work on any ubuntu or centos machine, I just added a bit of logic in there to allow a base Ubuntu or Centos machine to be able to build RocksDB from scratch. Example output on Ubuntu 14.04: ``` root@vagrant-ubuntu-trusty-64:/vagrant# ./tools/package.sh [+] g++-4.7 is already installed. skipping. [+] libgflags-dev is already installed. skipping. [+] ruby-all-dev is already installed. skipping. [+] fpm is already installed. skipping. Created package {:path=>"rocksdb_3.5_amd64.deb"} root@vagrant-ubuntu-trusty-64:/vagrant# dpkg --info rocksdb_3.5_amd64.deb new debian package, version 2.0. size 17392022 bytes: control archive=1518 bytes. 275 bytes, 11 lines control 2911 bytes, 38 lines md5sums Package: rocksdb Version: 3.5 License: BSD Vendor: Facebook Architecture: amd64 Maintainer: rocksdb@fb.com Installed-Size: 83358 Section: default Priority: extra Homepage: http://rocksdb.org/ Description: RocksDB is an embeddable persistent key-value store for fast storage. ``` Example output on CentOS 6.5: ``` [root@localhost vagrant]# rpm -qip rocksdb-3.5-1.x86_64.rpm Name : rocksdb Relocations: /usr Version : 3.5 Vendor: Facebook Release : 1 Build Date: Mon 29 Sep 2014 01:26:11 AM UTC Install Date: (not installed) Build Host: localhost Group : default Source RPM: rocksdb-3.5-1.src.rpm Size : 96231106 License: BSD Signature : (none) Packager : rocksdb@fb.com URL : http://rocksdb.org/ Summary : RocksDB is an embeddable persistent key-value store for fast storage. Description : RocksDB is an embeddable persistent key-value store for fast storage. ``` Test Plan: How this gets used is really up to the RocksDB core team. If you want to actually get this into mainline, you might have to change `make install` such that it install the RocksDB shared object file as well, which would require you to link against gflags (maybe?) and that would require some potential modifications to the script here (basically add a depends on that package). Currently, this will install the headers and a pre-compiled statically linked object file. If that's what you want out of life, than this requires no modifications. Reviewers: ljin, yhchiang, igor Reviewed By: igor Differential Revision: https://reviews.facebook.net/D24141
10 years ago
# ---------------------------------------------------------------------------
# Unit tests and tools
# ---------------------------------------------------------------------------
$(LIBRARY): $(LIBOBJECTS)
$(AM_V_AR)rm -f $@
$(AM_V_at)$(AR) $(ARFLAGS) $@ $(LIBOBJECTS)
db_bench: db/db_bench.o $(LIBOBJECTS) $(TESTUTIL)
$(AM_LINK)
cache_bench: util/cache_bench.o $(LIBOBJECTS) $(TESTUTIL)
$(AM_LINK)
memtablerep_bench: db/memtablerep_bench.o $(LIBOBJECTS) $(TESTUTIL)
$(AM_LINK)
block_hash_index_test: table/block_hash_index_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
db_stress: tools/db_stress.o $(LIBOBJECTS) $(TESTUTIL)
$(AM_LINK)
db_sanity_test: tools/db_sanity_test.o $(LIBOBJECTS) $(TESTUTIL)
$(AM_LINK)
db_repl_stress: tools/db_repl_stress.o $(LIBOBJECTS) $(TESTUTIL)
$(AM_LINK)
arena_test: util/arena_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
Implement autovector Summary: A vector that leverages pre-allocated stack-based array to achieve better performance for array with small amount of items. Test Plan: Added tests for both correctness and performance Here is the performance benchmark between vector and autovector Please note that in the test "Creation and Insertion Test", the test case were designed with the motivation described below: * no element inserted: internal array of std::vector may not really get initialize. * one element inserted: internal array of std::vector must have initialized. * kSize elements inserted. This shows the most time we'll spend if we keep everything in stack. * 2 * kSize elements inserted. The internal vector of autovector must have been initialized. Note: kSize is the capacity of autovector ===================================================== Creation and Insertion Test ===================================================== created 100000 vectors: each was inserted with 0 elements total time elapsed: 128000 (ns) created 100000 autovectors: each was inserted with 0 elements total time elapsed: 3641000 (ns) created 100000 VectorWithReserveSizes: each was inserted with 0 elements total time elapsed: 9896000 (ns) ----------------------------------- created 100000 vectors: each was inserted with 1 elements total time elapsed: 11089000 (ns) created 100000 autovectors: each was inserted with 1 elements total time elapsed: 5008000 (ns) created 100000 VectorWithReserveSizes: each was inserted with 1 elements total time elapsed: 24271000 (ns) ----------------------------------- created 100000 vectors: each was inserted with 4 elements total time elapsed: 39369000 (ns) created 100000 autovectors: each was inserted with 4 elements total time elapsed: 10121000 (ns) created 100000 VectorWithReserveSizes: each was inserted with 4 elements total time elapsed: 28473000 (ns) ----------------------------------- created 100000 vectors: each was inserted with 8 elements total time elapsed: 75013000 (ns) created 100000 autovectors: each was inserted with 8 elements total time elapsed: 18237000 (ns) created 100000 VectorWithReserveSizes: each was inserted with 8 elements total time elapsed: 42464000 (ns) ----------------------------------- created 100000 vectors: each was inserted with 16 elements total time elapsed: 102319000 (ns) created 100000 autovectors: each was inserted with 16 elements total time elapsed: 76724000 (ns) created 100000 VectorWithReserveSizes: each was inserted with 16 elements total time elapsed: 68285000 (ns) ----------------------------------- ===================================================== Sequence Access Test ===================================================== performed 100000 sequence access against vector size: 4 total time elapsed: 198000 (ns) performed 100000 sequence access against autovector size: 4 total time elapsed: 306000 (ns) ----------------------------------- performed 100000 sequence access against vector size: 8 total time elapsed: 565000 (ns) performed 100000 sequence access against autovector size: 8 total time elapsed: 512000 (ns) ----------------------------------- performed 100000 sequence access against vector size: 16 total time elapsed: 1076000 (ns) performed 100000 sequence access against autovector size: 16 total time elapsed: 1070000 (ns) ----------------------------------- Reviewers: dhruba, haobo, sdong, chip Reviewed By: dhruba CC: leveldb Differential Revision: https://reviews.facebook.net/D14655
11 years ago
autovector_test: util/autovector_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
Implement autovector Summary: A vector that leverages pre-allocated stack-based array to achieve better performance for array with small amount of items. Test Plan: Added tests for both correctness and performance Here is the performance benchmark between vector and autovector Please note that in the test "Creation and Insertion Test", the test case were designed with the motivation described below: * no element inserted: internal array of std::vector may not really get initialize. * one element inserted: internal array of std::vector must have initialized. * kSize elements inserted. This shows the most time we'll spend if we keep everything in stack. * 2 * kSize elements inserted. The internal vector of autovector must have been initialized. Note: kSize is the capacity of autovector ===================================================== Creation and Insertion Test ===================================================== created 100000 vectors: each was inserted with 0 elements total time elapsed: 128000 (ns) created 100000 autovectors: each was inserted with 0 elements total time elapsed: 3641000 (ns) created 100000 VectorWithReserveSizes: each was inserted with 0 elements total time elapsed: 9896000 (ns) ----------------------------------- created 100000 vectors: each was inserted with 1 elements total time elapsed: 11089000 (ns) created 100000 autovectors: each was inserted with 1 elements total time elapsed: 5008000 (ns) created 100000 VectorWithReserveSizes: each was inserted with 1 elements total time elapsed: 24271000 (ns) ----------------------------------- created 100000 vectors: each was inserted with 4 elements total time elapsed: 39369000 (ns) created 100000 autovectors: each was inserted with 4 elements total time elapsed: 10121000 (ns) created 100000 VectorWithReserveSizes: each was inserted with 4 elements total time elapsed: 28473000 (ns) ----------------------------------- created 100000 vectors: each was inserted with 8 elements total time elapsed: 75013000 (ns) created 100000 autovectors: each was inserted with 8 elements total time elapsed: 18237000 (ns) created 100000 VectorWithReserveSizes: each was inserted with 8 elements total time elapsed: 42464000 (ns) ----------------------------------- created 100000 vectors: each was inserted with 16 elements total time elapsed: 102319000 (ns) created 100000 autovectors: each was inserted with 16 elements total time elapsed: 76724000 (ns) created 100000 VectorWithReserveSizes: each was inserted with 16 elements total time elapsed: 68285000 (ns) ----------------------------------- ===================================================== Sequence Access Test ===================================================== performed 100000 sequence access against vector size: 4 total time elapsed: 198000 (ns) performed 100000 sequence access against autovector size: 4 total time elapsed: 306000 (ns) ----------------------------------- performed 100000 sequence access against vector size: 8 total time elapsed: 565000 (ns) performed 100000 sequence access against autovector size: 8 total time elapsed: 512000 (ns) ----------------------------------- performed 100000 sequence access against vector size: 16 total time elapsed: 1076000 (ns) performed 100000 sequence access against autovector size: 16 total time elapsed: 1070000 (ns) ----------------------------------- Reviewers: dhruba, haobo, sdong, chip Reviewed By: dhruba CC: leveldb Differential Revision: https://reviews.facebook.net/D14655
11 years ago
column_family_test: db/column_family_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
table_properties_collector_test: db/table_properties_collector_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
bloom_test: util/bloom_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
dynamic_bloom_test: util/dynamic_bloom_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
c_test: db/c_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
cache_test: util/cache_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
coding_test: util/coding_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
stringappend_test: utilities/merge_operators/string_append/stringappend_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
redis_test: utilities/redis/redis_lists_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
histogram_test: util/histogram_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
thread_local_test: util/thread_local_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
corruption_test: db/corruption_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
crc32c_test: util/crc32c_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
slice_transform_test: util/slice_transform_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
db_test: db/db_test.o db/db_test_util.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
db_log_iter_test: db/db_log_iter_test.o db/db_test_util.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
db_compaction_filter_test: db/db_compaction_filter_test.o db/db_test_util.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
db_compaction_test: db/db_compaction_test.o db/db_test_util.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
db_dynamic_level_test: db/db_dynamic_level_test.o db/db_test_util.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
db_inplace_update_test: db/db_inplace_update_test.o db/db_test_util.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
db_tailing_iter_test: db/db_tailing_iter_test.o db/db_test_util.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
db_iter_test: db/db_iter_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
db_universal_compaction_test: db/db_universal_compaction_test.o db/db_test_util.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
db_wal_test: db/db_wal_test.o db/db_test_util.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
log_write_bench: util/log_write_bench.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK) $(pg)
plain_table_db_test: db/plain_table_db_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
comparator_db_test: db/comparator_db_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
table_reader_bench: table/table_reader_bench.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK) $(pg)
perf_context_test: db/perf_context_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_V_CCLD)$(CXX) $^ $(EXEC_LDFLAGS) -o $@ $(LDFLAGS)
prefix_test: db/prefix_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_V_CCLD)$(CXX) $^ $(EXEC_LDFLAGS) -o $@ $(LDFLAGS)
[RocksDB] BackupableDB Summary: In this diff I present you BackupableDB v1. You can easily use it to backup your DB and it will do incremental snapshots for you. Let's first describe how you would use BackupableDB. It's inheriting StackableDB interface so you can easily construct it with your DB object -- it will add a method RollTheSnapshot() to the DB object. When you call RollTheSnapshot(), current snapshot of the DB will be stored in the backup dir. To restore, you can just call RestoreDBFromBackup() on a BackupableDB (which is a static method) and it will restore all files from the backup dir. In the next version, it will even support automatic backuping every X minutes. There are multiple things you can configure: 1. backup_env and db_env can be different, which is awesome because then you can easily backup to HDFS or wherever you feel like. 2. sync - if true, it *guarantees* backup consistency on machine reboot 3. number of snapshots to keep - this will keep last N snapshots around if you want, for some reason, be able to restore from an earlier snapshot. All the backuping is done in incremental fashion - if we already have 00010.sst, we will not copy it again. *IMPORTANT* -- This is based on assumption that 00010.sst never changes - two files named 00010.sst from the same DB will always be exactly the same. Is this true? I always copy manifest, current and log files. 4. You can decide if you want to flush the memtables before you backup, or you're fine with backing up the log files -- either way, you get a complete and consistent view of the database at a time of backup. 5. More things you can find in BackupableDBOptions Here is the directory structure I use: backup_dir/CURRENT_SNAPSHOT - just 4 bytes holding the latest snapshot 0, 1, 2, ... - files containing serialized version of each snapshot - containing a list of files files/*.sst - sst files shared between snapshots - if one snapshot references 00010.sst and another one needs to backup it from the DB, it will just reference the same file files/ 0/, 1/, 2/, ... - snapshot directories containing private snapshot files - current, manifest and log files All the files are ref counted and deleted immediatelly when they get out of scope. Some other stuff in this diff: 1. Added GetEnv() method to the DB. Discussed with @haobo and we agreed that it seems right thing to do. 2. Fixed StackableDB interface. The way it was set up before, I was not able to implement BackupableDB. Test Plan: I have a unittest, but please don't look at this yet. I just hacked it up to help me with debugging. I will write a lot of good tests and update the diff. Also, `make asan_check` Reviewers: dhruba, haobo, emayanke Reviewed By: dhruba CC: leveldb, haobo Differential Revision: https://reviews.facebook.net/D14295
11 years ago
backupable_db_test: utilities/backupable/backupable_db_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
[RocksDB] BackupableDB Summary: In this diff I present you BackupableDB v1. You can easily use it to backup your DB and it will do incremental snapshots for you. Let's first describe how you would use BackupableDB. It's inheriting StackableDB interface so you can easily construct it with your DB object -- it will add a method RollTheSnapshot() to the DB object. When you call RollTheSnapshot(), current snapshot of the DB will be stored in the backup dir. To restore, you can just call RestoreDBFromBackup() on a BackupableDB (which is a static method) and it will restore all files from the backup dir. In the next version, it will even support automatic backuping every X minutes. There are multiple things you can configure: 1. backup_env and db_env can be different, which is awesome because then you can easily backup to HDFS or wherever you feel like. 2. sync - if true, it *guarantees* backup consistency on machine reboot 3. number of snapshots to keep - this will keep last N snapshots around if you want, for some reason, be able to restore from an earlier snapshot. All the backuping is done in incremental fashion - if we already have 00010.sst, we will not copy it again. *IMPORTANT* -- This is based on assumption that 00010.sst never changes - two files named 00010.sst from the same DB will always be exactly the same. Is this true? I always copy manifest, current and log files. 4. You can decide if you want to flush the memtables before you backup, or you're fine with backing up the log files -- either way, you get a complete and consistent view of the database at a time of backup. 5. More things you can find in BackupableDBOptions Here is the directory structure I use: backup_dir/CURRENT_SNAPSHOT - just 4 bytes holding the latest snapshot 0, 1, 2, ... - files containing serialized version of each snapshot - containing a list of files files/*.sst - sst files shared between snapshots - if one snapshot references 00010.sst and another one needs to backup it from the DB, it will just reference the same file files/ 0/, 1/, 2/, ... - snapshot directories containing private snapshot files - current, manifest and log files All the files are ref counted and deleted immediatelly when they get out of scope. Some other stuff in this diff: 1. Added GetEnv() method to the DB. Discussed with @haobo and we agreed that it seems right thing to do. 2. Fixed StackableDB interface. The way it was set up before, I was not able to implement BackupableDB. Test Plan: I have a unittest, but please don't look at this yet. I just hacked it up to help me with debugging. I will write a lot of good tests and update the diff. Also, `make asan_check` Reviewers: dhruba, haobo, emayanke Reviewed By: dhruba CC: leveldb, haobo Differential Revision: https://reviews.facebook.net/D14295
11 years ago
checkpoint_test: utilities/checkpoint/checkpoint_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
document_db_test: utilities/document/document_db_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
json_document_test: utilities/document/json_document_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
spatial_db_test: utilities/spatialdb/spatial_db_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
ttl_test: utilities/ttl/ttl_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
write_batch_with_index_test: utilities/write_batch_with_index/write_batch_with_index_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
flush_job_test: db/flush_job_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
Support for SingleDelete() Summary: This patch fixes #7460559. It introduces SingleDelete as a new database operation. This operation can be used to delete keys that were never overwritten (no put following another put of the same key). If an overwritten key is single deleted the behavior is undefined. Single deletion of a non-existent key has no effect but multiple consecutive single deletions are not allowed (see limitations). In contrast to the conventional Delete() operation, the deletion entry is removed along with the value when the two are lined up in a compaction. Note: The semantics are similar to @igor's prototype that allowed to have this behavior on the granularity of a column family ( https://reviews.facebook.net/D42093 ). This new patch, however, is more aggressive when it comes to removing tombstones: It removes the SingleDelete together with the value whenever there is no snapshot between them while the older patch only did this when the sequence number of the deletion was older than the earliest snapshot. Most of the complex additions are in the Compaction Iterator, all other changes should be relatively straightforward. The patch also includes basic support for single deletions in db_stress and db_bench. Limitations: - Not compatible with cuckoo hash tables - Single deletions cannot be used in combination with merges and normal deletions on the same key (other keys are not affected by this) - Consecutive single deletions are currently not allowed (and older version of this patch supported this so it could be resurrected if needed) Test Plan: make all check Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor Reviewed By: igor Subscribers: maykov, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D43179
9 years ago
compaction_iterator_test: db/compaction_iterator_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
compaction_job_test: db/compaction_job_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
compaction_job_stats_test: db/compaction_job_stats_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
compact_on_deletion_collector_test: utilities/table_properties_collectors/compact_on_deletion_collector_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
wal_manager_test: db/wal_manager_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
dbformat_test: db/dbformat_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
env_test: util/env_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
fault_injection_test: db/fault_injection_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
rate_limiter_test: util/rate_limiter_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
delete_scheduler_test: util/delete_scheduler_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
filename_test: db/filename_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
file_reader_writer_test: util/file_reader_writer_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
Implement full filter for block based table. Summary: 1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file. 2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter. 3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type. 4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h. 5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc Benchmark: base commit 1d23b5c470844c1208301311f0889eca750431c0 Command: db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1 Read QPS increase for about 30% from 2230002 to 2991411. Test Plan: make all check valgrind db_test db_stress --use_block_based_filter = 0 ./auto_sanity_test.sh Reviewers: igor, yhchiang, ljin, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D20979
10 years ago
block_based_filter_block_test: table/block_based_filter_block_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
Implement full filter for block based table. Summary: 1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file. 2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter. 3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type. 4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h. 5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc Benchmark: base commit 1d23b5c470844c1208301311f0889eca750431c0 Command: db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1 Read QPS increase for about 30% from 2230002 to 2991411. Test Plan: make all check valgrind db_test db_stress --use_block_based_filter = 0 ./auto_sanity_test.sh Reviewers: igor, yhchiang, ljin, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D20979
10 years ago
full_filter_block_test: table/full_filter_block_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
log_test: db/log_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
table_test: table/table_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
block_test: table/block_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
skiplist_test: db/skiplist_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
version_edit_test: db/version_edit_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
version_set_test: db/version_set_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
compaction_picker_test: db/compaction_picker_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
version_builder_test: db/version_builder_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
file_indexer_test: db/file_indexer_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
reduce_levels_test: tools/reduce_levels_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
write_batch_test: db/write_batch_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
write_controller_test: db/write_controller_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
merge_helper_test: db/merge_helper_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
merge_test: db/merge_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
merger_test: table/merger_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
deletefile_test: db/deletefile_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
geodb_test: utilities/geodb/geodb_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
rocksdb_dump: tools/dump/rocksdb_dump.o $(LIBOBJECTS)
$(AM_LINK)
rocksdb_undump: tools/dump/rocksdb_undump.o $(LIBOBJECTS)
$(AM_LINK)
cuckoo_table_builder_test: table/cuckoo_table_builder_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
cuckoo_table_reader_test: table/cuckoo_table_reader_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
cuckoo_table_db_test: db/cuckoo_table_db_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
listener_test: db/listener_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
thread_list_test: util/thread_list_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
compact_files_test: db/compact_files_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
options_test: util/options_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
event_logger_test: util/event_logger_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
sst_dump_test: util/sst_dump_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
memenv_test : util/memenv_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
optimistic_transaction_test: utilities/transactions/optimistic_transaction_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
mock_env_test : util/mock_env_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
manual_compaction_test: util/manual_compaction_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
filelock_test: util/filelock_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
auto_roll_logger_test: util/auto_roll_logger_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
memtable_list_test: db/memtable_list_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
write_callback_test: db/write_callback_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
heap_test: util/heap_test.o $(GTEST)
$(AM_LINK)
transaction_test: utilities/transactions/transaction_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
sst_dump: tools/sst_dump.o $(LIBOBJECTS)
$(AM_LINK)
Utility to dump manifest contents. Summary: ./manifest_dump --file=/tmp/dbbench/MANIFEST-000002 Output looks like manifest_file_number 30 next_file_number 31 last_sequence 388082 log_number 28 prev_log_number 0 --- level 0 --- --- level 1 --- --- level 2 --- 5:3244155['0000000000000000' @ 1 : 1 .. '0000000000028220' @ 28221 : 1] 7:3244177['0000000000028221' @ 28222 : 1 .. '0000000000056441' @ 56442 : 1] 9:3244156['0000000000056442' @ 56443 : 1 .. '0000000000084662' @ 84663 : 1] 11:3244178['0000000000084663' @ 84664 : 1 .. '0000000000112883' @ 112884 : 1] 13:3244158['0000000000112884' @ 112885 : 1 .. '0000000000141104' @ 141105 : 1] 15:3244176['0000000000141105' @ 141106 : 1 .. '0000000000169325' @ 169326 : 1] 17:3244156['0000000000169326' @ 169327 : 1 .. '0000000000197546' @ 197547 : 1] 19:3244178['0000000000197547' @ 197548 : 1 .. '0000000000225767' @ 225768 : 1] 21:3244155['0000000000225768' @ 225769 : 1 .. '0000000000253988' @ 253989 : 1] 23:3244179['0000000000253989' @ 253990 : 1 .. '0000000000282209' @ 282210 : 1] 25:3244157['0000000000282210' @ 282211 : 1 .. '0000000000310430' @ 310431 : 1] 27:3244176['0000000000310431' @ 310432 : 1 .. '0000000000338651' @ 338652 : 1] 29:3244156['0000000000338652' @ 338653 : 1 .. '0000000000366872' @ 366873 : 1] --- level 3 --- --- level 4 --- --- level 5 --- --- level 6 --- Test Plan: run on test directory created by dbbench Reviewers: heyongqiang Reviewed By: heyongqiang CC: hustliubo Differential Revision: https://reviews.facebook.net/D4743
12 years ago
ldb_cmd_test: util/ldb_cmd_test.o $(LIBOBJECTS) $(TESTHARNESS)
$(AM_LINK)
ldb: tools/ldb.o $(LIBOBJECTS)
$(AM_LINK)
#-------------------------------------------------
# make install related stuff
INSTALL_PATH ?= /usr/local
uninstall:
rm -rf $(INSTALL_PATH)/include/rocksdb \
$(INSTALL_PATH)/lib/$(LIBRARY) \
$(INSTALL_PATH)/lib/$(SHARED4) \
$(INSTALL_PATH)/lib/$(SHARED3) \
$(INSTALL_PATH)/lib/$(SHARED2) \
$(INSTALL_PATH)/lib/$(SHARED1)
install-headers:
install -d $(INSTALL_PATH)/lib
for header_dir in `find "include/rocksdb" -type d`; do \
install -d $(INSTALL_PATH)/$$header_dir; \
done
for header in `find "include/rocksdb" -type f -name *.h`; do \
install -C -m 644 $$header $(INSTALL_PATH)/$$header; \
done
install-static: install-headers $(LIBRARY)
install -C -m 755 $(LIBRARY) $(INSTALL_PATH)/lib
install-shared: install-headers $(SHARED4)
install -C -m 755 $(SHARED4) $(INSTALL_PATH)/lib && \
ln -fs $(SHARED4) $(INSTALL_PATH)/lib/$(SHARED3) && \
ln -fs $(SHARED4) $(INSTALL_PATH)/lib/$(SHARED2) && \
ln -fs $(SHARED4) $(INSTALL_PATH)/lib/$(SHARED1)
# install static by default + install shared if it exists
install: install-static
[ -e $(SHARED4) ] && $(MAKE) install-shared || :
#-------------------------------------------------
# ---------------------------------------------------------------------------
# Jni stuff
# ---------------------------------------------------------------------------
JAVA_INCLUDE = -I$(JAVA_HOME)/include/ -I$(JAVA_HOME)/include/linux
ARCH := $(shell getconf LONG_BIT)
ROCKSDBJNILIB = librocksdbjni-linux$(ARCH).so
ROCKSDB_JAR = rocksdbjni-$(ROCKSDB_MAJOR).$(ROCKSDB_MINOR).$(ROCKSDB_PATCH)-linux$(ARCH).jar
ROCKSDB_JAR_ALL = rocksdbjni-$(ROCKSDB_MAJOR).$(ROCKSDB_MINOR).$(ROCKSDB_PATCH).jar
ROCKSDB_JAVADOCS_JAR = rocksdbjni-$(ROCKSDB_MAJOR).$(ROCKSDB_MINOR).$(ROCKSDB_PATCH)-javadoc.jar
ROCKSDB_SOURCES_JAR = rocksdbjni-$(ROCKSDB_MAJOR).$(ROCKSDB_MINOR).$(ROCKSDB_PATCH)-sources.jar
ifeq ($(PLATFORM), OS_MACOSX)
ROCKSDBJNILIB = librocksdbjni-osx.jnilib
ROCKSDB_JAR = rocksdbjni-$(ROCKSDB_MAJOR).$(ROCKSDB_MINOR).$(ROCKSDB_PATCH)-osx.jar
ifneq ("$(wildcard $(JAVA_HOME)/include/darwin)","")
JAVA_INCLUDE = -I$(JAVA_HOME)/include -I $(JAVA_HOME)/include/darwin
else
JAVA_INCLUDE = -I/System/Library/Frameworks/JavaVM.framework/Headers/
endif
endif
libz.a:
-rm -rf zlib-1.2.8
curl -O http://zlib.net/zlib-1.2.8.tar.gz
tar xvzf zlib-1.2.8.tar.gz
cd zlib-1.2.8 && CFLAGS='-fPIC' ./configure --static && make
cp zlib-1.2.8/libz.a .
libbz2.a:
-rm -rf bzip2-1.0.6
curl -O http://www.bzip.org/1.0.6/bzip2-1.0.6.tar.gz
tar xvzf bzip2-1.0.6.tar.gz
cd bzip2-1.0.6 && make CFLAGS='-fPIC -O2 -g -D_FILE_OFFSET_BITS=64'
cp bzip2-1.0.6/libbz2.a .
libsnappy.a:
-rm -rf snappy-1.1.1
curl -O https://snappy.googlecode.com/files/snappy-1.1.1.tar.gz
tar xvzf snappy-1.1.1.tar.gz
cd snappy-1.1.1 && ./configure --with-pic --enable-static
cd snappy-1.1.1 && make
cp snappy-1.1.1/.libs/libsnappy.a .
liblz4.a:
-rm -rf lz4-r127
curl -O https://codeload.github.com/Cyan4973/lz4/tar.gz/r127
mv r127 lz4-r127.tar.gz
tar xvzf lz4-r127.tar.gz
cd lz4-r127/lib && make CFLAGS='-fPIC' all
cp lz4-r127/lib/liblz4.a .
# A version of each $(LIBOBJECTS) compiled with -fPIC and a fixed set of static compression libraries
java_static_libobjects = $(patsubst %,jls/%,$(LIBOBJECTS))
CLEAN_FILES += jls
JAVA_STATIC_FLAGS = -DZLIB -DBZIP2 -DSNAPPY -DLZ4
JAVA_STATIC_INCLUDES = -I./zlib-1.2.8 -I./bzip2-1.0.6 -I./snappy-1.1.1 -I./lz4-r127/lib
$(java_static_libobjects): jls/%.o: %.cc libz.a libbz2.a libsnappy.a liblz4.a
$(AM_V_CC)mkdir -p $(@D) && $(CXX) $(CXXFLAGS) $(JAVA_STATIC_FLAGS) $(JAVA_STATIC_INCLUDES) -fPIC -c $< -o $@ $(COVERAGEFLAGS)
rocksdbjavastatic: $(java_static_libobjects)
cd java;$(MAKE) javalib;
rm -f ./java/target/$(ROCKSDBJNILIB)
$(CXX) $(CXXFLAGS) -I./java/. $(JAVA_INCLUDE) -shared -fPIC \
-o ./java/target/$(ROCKSDBJNILIB) $(JNI_NATIVE_SOURCES) \
$(java_static_libobjects) $(COVERAGEFLAGS) \
libz.a libbz2.a libsnappy.a liblz4.a $(JAVA_STATIC_LDFLAGS)
cd java/target;strip -S -x $(ROCKSDBJNILIB)
cd java;jar -cf target/$(ROCKSDB_JAR) HISTORY*.md
cd java/target;jar -uf $(ROCKSDB_JAR) $(ROCKSDBJNILIB)
cd java/target/classes;jar -uf ../$(ROCKSDB_JAR) org/rocksdb/*.class org/rocksdb/util/*.class
cd java/target/apidocs;jar -cf ../$(ROCKSDB_JAVADOCS_JAR) *
cd java/src/main/java;jar -cf ../../../target/$(ROCKSDB_SOURCES_JAR) org
rocksdbjavastaticrelease: rocksdbjavastatic
cd java/crossbuild && vagrant destroy -f && vagrant up linux32 && vagrant halt linux32 && vagrant up linux64 && vagrant halt linux64
cd java;jar -cf target/$(ROCKSDB_JAR_ALL) HISTORY*.md
cd java/target;jar -uf $(ROCKSDB_JAR_ALL) librocksdbjni-*.so librocksdbjni-*.jnilib
cd java/target/classes;jar -uf ../$(ROCKSDB_JAR_ALL) org/rocksdb/*.class org/rocksdb/util/*.class
rocksdbjavastaticpublish: rocksdbjavastaticrelease
mvn gpg:sign-and-deploy-file -Durl=https://oss.sonatype.org/service/local/staging/deploy/maven2/ -DrepositoryId=sonatype-nexus-staging -DpomFile=java/rocksjni.pom -Dfile=java/target/rocksdbjni-$(ROCKSDB_MAJOR).$(ROCKSDB_MINOR).$(ROCKSDB_PATCH)-javadoc.jar -Dclassifier=javadoc
mvn gpg:sign-and-deploy-file -Durl=https://oss.sonatype.org/service/local/staging/deploy/maven2/ -DrepositoryId=sonatype-nexus-staging -DpomFile=java/rocksjni.pom -Dfile=java/target/rocksdbjni-$(ROCKSDB_MAJOR).$(ROCKSDB_MINOR).$(ROCKSDB_PATCH)-sources.jar -Dclassifier=sources
mvn gpg:sign-and-deploy-file -Durl=https://oss.sonatype.org/service/local/staging/deploy/maven2/ -DrepositoryId=sonatype-nexus-staging -DpomFile=java/rocksjni.pom -Dfile=java/target/rocksdbjni-$(ROCKSDB_MAJOR).$(ROCKSDB_MINOR).$(ROCKSDB_PATCH)-linux64.jar -Dclassifier=linux64
mvn gpg:sign-and-deploy-file -Durl=https://oss.sonatype.org/service/local/staging/deploy/maven2/ -DrepositoryId=sonatype-nexus-staging -DpomFile=java/rocksjni.pom -Dfile=java/target/rocksdbjni-$(ROCKSDB_MAJOR).$(ROCKSDB_MINOR).$(ROCKSDB_PATCH)-linux32.jar -Dclassifier=linux32
mvn gpg:sign-and-deploy-file -Durl=https://oss.sonatype.org/service/local/staging/deploy/maven2/ -DrepositoryId=sonatype-nexus-staging -DpomFile=java/rocksjni.pom -Dfile=java/target/rocksdbjni-$(ROCKSDB_MAJOR).$(ROCKSDB_MINOR).$(ROCKSDB_PATCH)-osx.jar -Dclassifier=osx
mvn gpg:sign-and-deploy-file -Durl=https://oss.sonatype.org/service/local/staging/deploy/maven2/ -DrepositoryId=sonatype-nexus-staging -DpomFile=java/rocksjni.pom -Dfile=java/target/rocksdbjni-$(ROCKSDB_MAJOR).$(ROCKSDB_MINOR).$(ROCKSDB_PATCH).jar
# A version of each $(LIBOBJECTS) compiled with -fPIC
java_libobjects = $(patsubst %,jl/%,$(LIBOBJECTS))
CLEAN_FILES += jl
$(java_libobjects): jl/%.o: %.cc
$(AM_V_CC)mkdir -p $(@D) && $(CXX) $(CXXFLAGS) -fPIC -c $< -o $@ $(COVERAGEFLAGS)
rocksdbjava: $(java_libobjects)
$(AM_V_GEN)cd java;$(MAKE) javalib;
$(AM_V_at)rm -f ./java/target/$(ROCKSDBJNILIB)
$(AM_V_at)$(CXX) $(CXXFLAGS) -I./java/. $(JAVA_INCLUDE) -shared -fPIC -o ./java/target/$(ROCKSDBJNILIB) $(JNI_NATIVE_SOURCES) $(java_libobjects) $(JAVA_LDFLAGS) $(COVERAGEFLAGS)
$(AM_V_at)cd java;jar -cf target/$(ROCKSDB_JAR) HISTORY*.md
$(AM_V_at)cd java/target;jar -uf $(ROCKSDB_JAR) $(ROCKSDBJNILIB)
$(AM_V_at)cd java/target/classes;jar -uf ../$(ROCKSDB_JAR) org/rocksdb/*.class org/rocksdb/util/*.class
jclean:
cd java;$(MAKE) clean;
jtest: rocksdbjava
cd java;$(MAKE) sample;$(MAKE) test;
[JNI] Add an initial benchmark for java binding for rocksdb. Summary: * Add a benchmark for java binding for rocksdb. The java benchmark is a complete rewrite based on the c++ db/db_bench.cc and the DbBenchmark in dain's java leveldb. * Support multithreading. * 'readseq' is currently not supported as it requires RocksDB Iterator. * usage: --benchmarks Comma-separated list of operations to run in the specified order Actual benchmarks: fillseq -- write N values in sequential key order in async mode fillrandom -- write N values in random key order in async mode fillbatch -- write N/1000 batch where each batch has 1000 values in random key order in sync mode fillsync -- write N/100 values in random key order in sync mode fill100K -- write N/1000 100K values in random order in async mode readseq -- read N times sequentially readrandom -- read N times in random order readhot -- read N times in random order from 1% section of DB Meta Operations: delete -- delete DB DEFAULT: [fillseq, readrandom, fillrandom] --compression_ratio Arrange to generate values that shrink to this fraction of their original size after compression DEFAULT: 0.5 --use_existing_db If true, do not destroy the existing database. If you set this flag and also specify a benchmark that wants a fresh database, that benchmark will fail. DEFAULT: false --num Number of key/values to place in database. DEFAULT: 1000000 --threads Number of concurrent threads to run. DEFAULT: 1 --reads Number of read operations to do. If negative, do --nums reads. --key_size The size of each key in bytes. DEFAULT: 16 --value_size The size of each value in bytes. DEFAULT: 100 --write_buffer_size Number of bytes to buffer in memtable before compacting (initialized to default value by 'main'.) DEFAULT: 4194304 --cache_size Number of bytes to use as a cache of uncompressed data. Negative means use default settings. DEFAULT: -1 --seed Seed base for random number generators. DEFAULT: 0 --db Use the db with the following name. DEFAULT: /tmp/rocksdbjni-bench * Add RocksDB.write(). Test Plan: make jbench Reviewers: haobo, sdong, dhruba, ankgup87 Reviewed By: haobo CC: leveldb Differential Revision: https://reviews.facebook.net/D17433
11 years ago
jdb_bench:
cd java;$(MAKE) db_bench;
commit-prereq:
$(MAKE) clean && $(MAKE) all check;
$(MAKE) clean && $(MAKE) jclean && $(MAKE) rocksdbjava;
$(MAKE) clean && USE_CLANG=1 $(MAKE) all;
$(MAKE) clean && OPT=-DROCKSDB_LITE $(MAKE) static_lib;
xfunc:
for xftest in $(XFUNC_TESTS); do \
echo "===== Running xftest $$xftest"; \
make check ROCKSDB_XFUNC_TEST="$$xftest" tests-regexp="DBTest" ;\
done
# ---------------------------------------------------------------------------
# Platform-specific compilation
# ---------------------------------------------------------------------------
ifeq ($(PLATFORM), IOS)
# For iOS, create universal object files to be used on both the simulator and
# a device.
PLATFORMSROOT=/Applications/Xcode.app/Contents/Developer/Platforms
SIMULATORROOT=$(PLATFORMSROOT)/iPhoneSimulator.platform/Developer
DEVICEROOT=$(PLATFORMSROOT)/iPhoneOS.platform/Developer
IOSVERSION=$(shell defaults read $(PLATFORMSROOT)/iPhoneOS.platform/version CFBundleShortVersionString)
.cc.o:
mkdir -p ios-x86/$(dir $@)
$(CXX) $(CXXFLAGS) -isysroot $(SIMULATORROOT)/SDKs/iPhoneSimulator$(IOSVERSION).sdk -arch i686 -arch x86_64 -c $< -o ios-x86/$@
mkdir -p ios-arm/$(dir $@)
xcrun -sdk iphoneos $(CXX) $(CXXFLAGS) -isysroot $(DEVICEROOT)/SDKs/iPhoneOS$(IOSVERSION).sdk -arch armv6 -arch armv7 -arch armv7s -arch arm64 -c $< -o ios-arm/$@
lipo ios-x86/$@ ios-arm/$@ -create -output $@
.c.o:
mkdir -p ios-x86/$(dir $@)
$(CC) $(CFLAGS) -isysroot $(SIMULATORROOT)/SDKs/iPhoneSimulator$(IOSVERSION).sdk -arch i686 -arch x86_64 -c $< -o ios-x86/$@
mkdir -p ios-arm/$(dir $@)
xcrun -sdk iphoneos $(CC) $(CFLAGS) -isysroot $(DEVICEROOT)/SDKs/iPhoneOS$(IOSVERSION).sdk -arch armv6 -arch armv7 -arch armv7s -arch arm64 -c $< -o ios-arm/$@
lipo ios-x86/$@ ios-arm/$@ -create -output $@
else
.cc.o:
$(AM_V_CC)$(CXX) $(CXXFLAGS) -c $< -o $@ $(COVERAGEFLAGS)
.c.o:
$(AM_V_CC)$(CC) $(CFLAGS) -c $< -o $@
endif
# ---------------------------------------------------------------------------
# Source files dependencies detection
# ---------------------------------------------------------------------------
run 'make check's rules (and even subtests) in parallel Summary: When GNU parallel is available, "make check" tests are now run in parallel. When /dev/shm is usable, we tell those tests to create temporary files therein. Now, the longest-running single test, db_test, (which is composed of hundreds of sub-tests) is no longer run sequentially: instead, each of its sub-tests is run independently, and can be parallelized along with all other tests. To make that process easier, this change creates a temporary directory, "t/", in which it puts a small script for each of those subtests. The output from each parallel-run test is now saved in t/log-TEST_NAME. When GNU parallel is not available, we run the tests in sequence, just as before. If GNU parallel is available and you don't like the default of running one subtest per core, you can invoke "make J=1 check" to run only one test at a time. Beware: this will take a long time, and it starts with the two longest-running tests, so you will wait for a long time before seeing any results. Instead, if you want to use fewer resources but still see useful progress, try "make J=60% check". That will attempt to ensure that 60% of the cores are occupied by test runs. To watch progress of individual tests (duration, success (PASS-or-FAIL), name), run "make watch-log" in the same directory from another window. That will start with something like this: and when complete should show numbers/names like this: Every 0.1s: sort -k7,7nr -k4,4gr LOG|perl -n -e '@a=split("\t",$_,-1); $t=$a[8]; $t =~ s,^\./,,;' -e '$t =~ s, >.*,,; chomp $t;' -e '$t =~ /.*--gtest_filter=... Wed Apr 1 10:51:42 2015 152.221 PASS t/DBTest.FileCreationRandomFailure 109.280 PASS t/DBTest.EncodeDecompressedBlockSizeTest 82.315 PASS reduce_levels_test 77.812 PASS t/DBTest.CompactionFilterWithValueChange 73.236 PASS backupable_db_test 63.428 PASS deletefile_test 57.248 PASS table_test 55.665 PASS prefix_test 49.816 PASS t/DBTest.RateLimitingTest ... Test Plan: Timings (measured so as to exclude compile and link times): With this change, all tests complete in 2m40s on a system for which nproc prints 32. Prior to this this change, "make check" would take 24.5 minutes on that same system. Here are durations (in seconds) of the longest-running subtests: 152.435 PASS t/DBTest.FileCreationRandomFailure 107.070 PASS t/DBTest.EncodeDecompressedBlockSizeTest 81.391 PASS ./reduce_levels_test 71.587 PASS ./backupable_db_test 61.746 PASS ./deletefile_test 57.960 PASS ./table_test 55.230 PASS ./prefix_test 54.060 PASS t/DBTest.CompactionFilterWithValueChange 48.873 PASS t/DBTest.RateLimitingTest 47.569 PASS ./fault_injection_test 46.593 PASS t/DBTest.Randomized 42.662 PASS t/DBTest.CompactionFilter 31.793 PASS t/DBTest.SparseMerge 30.612 PASS t/DBTest.CompactionFilterV2 25.891 PASS t/DBTest.GroupCommitTest 23.863 PASS t/DBTest.DynamicLevelMaxBytesBase 22.976 PASS ./rate_limiter_test 18.942 PASS t/DBTest.OptimizeFiltersForHits 16.851 PASS ./env_test 15.399 PASS t/DBTest.CompactionFilterV2WithValueChange 14.827 PASS t/DBTest.CompactionFilterV2NULLPrefix Reviewers: igor, sdong, rven, yhchiang, igor.sugak Reviewed By: igor.sugak Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D35379
10 years ago
all_sources = $(LIB_SOURCES) $(TEST_BENCH_SOURCES) $(MOCK_SOURCES)
DEPFILES = $(all_sources:.cc=.d)
# Add proper dependency support so changing a .h file forces a .cc file to
# rebuild.
# The .d file indicates .cc file's dependencies on .h files. We generate such
# dependency by g++'s -MM option, whose output is a make dependency rule.
run 'make check's rules (and even subtests) in parallel Summary: When GNU parallel is available, "make check" tests are now run in parallel. When /dev/shm is usable, we tell those tests to create temporary files therein. Now, the longest-running single test, db_test, (which is composed of hundreds of sub-tests) is no longer run sequentially: instead, each of its sub-tests is run independently, and can be parallelized along with all other tests. To make that process easier, this change creates a temporary directory, "t/", in which it puts a small script for each of those subtests. The output from each parallel-run test is now saved in t/log-TEST_NAME. When GNU parallel is not available, we run the tests in sequence, just as before. If GNU parallel is available and you don't like the default of running one subtest per core, you can invoke "make J=1 check" to run only one test at a time. Beware: this will take a long time, and it starts with the two longest-running tests, so you will wait for a long time before seeing any results. Instead, if you want to use fewer resources but still see useful progress, try "make J=60% check". That will attempt to ensure that 60% of the cores are occupied by test runs. To watch progress of individual tests (duration, success (PASS-or-FAIL), name), run "make watch-log" in the same directory from another window. That will start with something like this: and when complete should show numbers/names like this: Every 0.1s: sort -k7,7nr -k4,4gr LOG|perl -n -e '@a=split("\t",$_,-1); $t=$a[8]; $t =~ s,^\./,,;' -e '$t =~ s, >.*,,; chomp $t;' -e '$t =~ /.*--gtest_filter=... Wed Apr 1 10:51:42 2015 152.221 PASS t/DBTest.FileCreationRandomFailure 109.280 PASS t/DBTest.EncodeDecompressedBlockSizeTest 82.315 PASS reduce_levels_test 77.812 PASS t/DBTest.CompactionFilterWithValueChange 73.236 PASS backupable_db_test 63.428 PASS deletefile_test 57.248 PASS table_test 55.665 PASS prefix_test 49.816 PASS t/DBTest.RateLimitingTest ... Test Plan: Timings (measured so as to exclude compile and link times): With this change, all tests complete in 2m40s on a system for which nproc prints 32. Prior to this this change, "make check" would take 24.5 minutes on that same system. Here are durations (in seconds) of the longest-running subtests: 152.435 PASS t/DBTest.FileCreationRandomFailure 107.070 PASS t/DBTest.EncodeDecompressedBlockSizeTest 81.391 PASS ./reduce_levels_test 71.587 PASS ./backupable_db_test 61.746 PASS ./deletefile_test 57.960 PASS ./table_test 55.230 PASS ./prefix_test 54.060 PASS t/DBTest.CompactionFilterWithValueChange 48.873 PASS t/DBTest.RateLimitingTest 47.569 PASS ./fault_injection_test 46.593 PASS t/DBTest.Randomized 42.662 PASS t/DBTest.CompactionFilter 31.793 PASS t/DBTest.SparseMerge 30.612 PASS t/DBTest.CompactionFilterV2 25.891 PASS t/DBTest.GroupCommitTest 23.863 PASS t/DBTest.DynamicLevelMaxBytesBase 22.976 PASS ./rate_limiter_test 18.942 PASS t/DBTest.OptimizeFiltersForHits 16.851 PASS ./env_test 15.399 PASS t/DBTest.CompactionFilterV2WithValueChange 14.827 PASS t/DBTest.CompactionFilterV2NULLPrefix Reviewers: igor, sdong, rven, yhchiang, igor.sugak Reviewed By: igor.sugak Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D35379
10 years ago
$(DEPFILES): %.d: %.cc
@$(CXX) $(CXXFLAGS) $(PLATFORM_SHARED_CFLAGS) \
-MM -MT'$@' -MT'$(<:.cc=.o)' "$<" -o '$@'
depend: $(DEPFILES)
# if the make goal is either "clean" or "format", we shouldn't
# try to import the *.d files.
# TODO(kailiu) The unfamiliarity of Make's conditions leads to the ugly
# working solution.
ifneq ($(MAKECMDGOALS),clean)
ifneq ($(MAKECMDGOALS),format)
ifneq ($(MAKECMDGOALS),jclean)
ifneq ($(MAKECMDGOALS),jtest)
Package generation for Ubuntu and CentOS Summary: I put together a script to assist in the generation of deb's and rpm's. I've tested that this works on ubuntu via vagrant. I've included the Vagrantfile here, but I can remove it if it's not useful. The package.sh script should work on any ubuntu or centos machine, I just added a bit of logic in there to allow a base Ubuntu or Centos machine to be able to build RocksDB from scratch. Example output on Ubuntu 14.04: ``` root@vagrant-ubuntu-trusty-64:/vagrant# ./tools/package.sh [+] g++-4.7 is already installed. skipping. [+] libgflags-dev is already installed. skipping. [+] ruby-all-dev is already installed. skipping. [+] fpm is already installed. skipping. Created package {:path=>"rocksdb_3.5_amd64.deb"} root@vagrant-ubuntu-trusty-64:/vagrant# dpkg --info rocksdb_3.5_amd64.deb new debian package, version 2.0. size 17392022 bytes: control archive=1518 bytes. 275 bytes, 11 lines control 2911 bytes, 38 lines md5sums Package: rocksdb Version: 3.5 License: BSD Vendor: Facebook Architecture: amd64 Maintainer: rocksdb@fb.com Installed-Size: 83358 Section: default Priority: extra Homepage: http://rocksdb.org/ Description: RocksDB is an embeddable persistent key-value store for fast storage. ``` Example output on CentOS 6.5: ``` [root@localhost vagrant]# rpm -qip rocksdb-3.5-1.x86_64.rpm Name : rocksdb Relocations: /usr Version : 3.5 Vendor: Facebook Release : 1 Build Date: Mon 29 Sep 2014 01:26:11 AM UTC Install Date: (not installed) Build Host: localhost Group : default Source RPM: rocksdb-3.5-1.src.rpm Size : 96231106 License: BSD Signature : (none) Packager : rocksdb@fb.com URL : http://rocksdb.org/ Summary : RocksDB is an embeddable persistent key-value store for fast storage. Description : RocksDB is an embeddable persistent key-value store for fast storage. ``` Test Plan: How this gets used is really up to the RocksDB core team. If you want to actually get this into mainline, you might have to change `make install` such that it install the RocksDB shared object file as well, which would require you to link against gflags (maybe?) and that would require some potential modifications to the script here (basically add a depends on that package). Currently, this will install the headers and a pre-compiled statically linked object file. If that's what you want out of life, than this requires no modifications. Reviewers: ljin, yhchiang, igor Reviewed By: igor Differential Revision: https://reviews.facebook.net/D24141
10 years ago
ifneq ($(MAKECMDGOALS),package)
ifneq ($(MAKECMDGOALS),analyze)
-include $(DEPFILES)
endif
endif
endif
endif
Package generation for Ubuntu and CentOS Summary: I put together a script to assist in the generation of deb's and rpm's. I've tested that this works on ubuntu via vagrant. I've included the Vagrantfile here, but I can remove it if it's not useful. The package.sh script should work on any ubuntu or centos machine, I just added a bit of logic in there to allow a base Ubuntu or Centos machine to be able to build RocksDB from scratch. Example output on Ubuntu 14.04: ``` root@vagrant-ubuntu-trusty-64:/vagrant# ./tools/package.sh [+] g++-4.7 is already installed. skipping. [+] libgflags-dev is already installed. skipping. [+] ruby-all-dev is already installed. skipping. [+] fpm is already installed. skipping. Created package {:path=>"rocksdb_3.5_amd64.deb"} root@vagrant-ubuntu-trusty-64:/vagrant# dpkg --info rocksdb_3.5_amd64.deb new debian package, version 2.0. size 17392022 bytes: control archive=1518 bytes. 275 bytes, 11 lines control 2911 bytes, 38 lines md5sums Package: rocksdb Version: 3.5 License: BSD Vendor: Facebook Architecture: amd64 Maintainer: rocksdb@fb.com Installed-Size: 83358 Section: default Priority: extra Homepage: http://rocksdb.org/ Description: RocksDB is an embeddable persistent key-value store for fast storage. ``` Example output on CentOS 6.5: ``` [root@localhost vagrant]# rpm -qip rocksdb-3.5-1.x86_64.rpm Name : rocksdb Relocations: /usr Version : 3.5 Vendor: Facebook Release : 1 Build Date: Mon 29 Sep 2014 01:26:11 AM UTC Install Date: (not installed) Build Host: localhost Group : default Source RPM: rocksdb-3.5-1.src.rpm Size : 96231106 License: BSD Signature : (none) Packager : rocksdb@fb.com URL : http://rocksdb.org/ Summary : RocksDB is an embeddable persistent key-value store for fast storage. Description : RocksDB is an embeddable persistent key-value store for fast storage. ``` Test Plan: How this gets used is really up to the RocksDB core team. If you want to actually get this into mainline, you might have to change `make install` such that it install the RocksDB shared object file as well, which would require you to link against gflags (maybe?) and that would require some potential modifications to the script here (basically add a depends on that package). Currently, this will install the headers and a pre-compiled statically linked object file. If that's what you want out of life, than this requires no modifications. Reviewers: ljin, yhchiang, igor Reviewed By: igor Differential Revision: https://reviews.facebook.net/D24141
10 years ago
endif
endif