Summary:
Fixing a corner case crash when there was no data read from file, but status is still OK
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5586
Differential Revision: D16348117
Pulled By: elipoz
fbshipit-source-id: f97973308024f020d8be79ca3c56466b84d80656
Summary:
Crc32c Parallel computation optimization:
Algorithm comes from Intel whitepaper: [crc-iscsi-polynomial-crc32-instruction-paper](https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/crc-iscsi-polynomial-crc32-instruction-paper.pdf)
Input data is divided into three equal-sized blocks
Three parallel blocks (crc0, crc1, crc2) for 1024 Bytes
One Block: 42(BLK_LENGTH) * 8(step length: crc32c_u64) bytes
1. crc32c_test:
```
[==========] Running 4 tests from 1 test case.
[----------] Global test environment set-up.
[----------] 4 tests from CRC
[ RUN ] CRC.StandardResults
[ OK ] CRC.StandardResults (1 ms)
[ RUN ] CRC.Values
[ OK ] CRC.Values (0 ms)
[ RUN ] CRC.Extend
[ OK ] CRC.Extend (0 ms)
[ RUN ] CRC.Mask
[ OK ] CRC.Mask (0 ms)
[----------] 4 tests from CRC (1 ms total)
[----------] Global test environment tear-down
[==========] 4 tests from 1 test case ran. (1 ms total)
[ PASSED ] 4 tests.
```
2. RocksDB benchmark: db_bench --benchmarks="crc32c"
```
Linear Arm crc32c:
crc32c: 1.005 micros/op 995133 ops/sec; 3887.2 MB/s (4096 per op)
```
```
Parallel optimization with Armv8 crypto extension:
crc32c: 0.419 micros/op 2385078 ops/sec; 9316.7 MB/s (4096 per op)
```
It gets ~2.4x speedup compared to linear Arm crc32c instructions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5494
Differential Revision: D16340806
fbshipit-source-id: 95dae9a5b646fd20a8303671d82f17b2e162e945
Summary:
Added support for sequential read-ahead file that can prefetch the read data and later serve it from internal cache buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5580
Differential Revision: D16287082
Pulled By: elipoz
fbshipit-source-id: a3e7ad9643d377d39352ff63058ce050ec31dcf3
Summary:
RandomAccessFileReader.for_compaction_ doesn't seem to be used anymore. Remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5572
Test Plan: USE_CLANG=1 make all check -j
Differential Revision: D16286178
fbshipit-source-id: aa338049761033dfbe5e8b1707bbb0be2df5be7e
Summary:
When 'HAVE_ARM64_CRC' is set, the blew methods:
- bool rocksdb::crc32c::isSSE42()
- bool rocksdb::crc32c::isPCLMULQDQ()
are defined but not used, the unused-function is raised
when do rocksdb build.
This patch try to cleanup these warnings by add ifndef,
if it build under the HAVE_ARM64_CRC, we will not define
`isSSE42` and `isPCLMULQDQ`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5565
Differential Revision: D16233654
fbshipit-source-id: c32a9dda7465dbf65f9ccafef159124db92cdffd
Summary:
Current PosixLogger performs IO operations using posix calls. Thus the
current implementation will not work for non-posix env. Created a new
logger class EnvLogger that uses env specific WritableFileWriter for IO operations.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5491
Test Plan: make check
Differential Revision: D15909002
Pulled By: ggaurav28
fbshipit-source-id: 13a8105176e8e42db0c59798d48cb6a0dbccc965
Summary:
Sometimes it is helpful to fetch the whole history of stats after benchmark runs. Add such an option
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5532
Test Plan: Run the benchmark manually and observe the output is as expected.
Differential Revision: D16097764
fbshipit-source-id: 10b5b735a22a18be198b8f348be11f11f8806904
Summary:
Enhancement to MultiGet batching to read data blocks required for keys in a batch in parallel from disk. It uses Env::MultiRead() API to read multiple blocks and reduce latency.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5464
Test Plan:
1. make check
2. make asan_check
3. make asan_crash
Differential Revision: D15911771
Pulled By: anand1976
fbshipit-source-id: 605036b9af0f90ca0020dc87c3a86b4da6e83394
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
Summary:
Currently the read-ahead logic for user reads and compaction reads go through different code paths where compaction reads create new table readers and use `ReadaheadRandomAccessFile`. This change is to unify read-ahead logic to use read-ahead in BlockBasedTableReader::InitDataBlock(). As a result of the change `ReadAheadRandomAccessFile` class and `new_table_reader_for_compaction_inputs` option will no longer be used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5431
Test Plan:
make check
Here is the benchmarking - https://gist.github.com/vjnadimpalli/083cf423f7b6aa12dcdb14c858bc18a5
Differential Revision: D15772533
Pulled By: vjnadimpalli
fbshipit-source-id: b71dca710590471ede6fb37553388654e2e479b9
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
It's useful to be able to (optionally) associate key-value pairs with user-provided timestamps. This PR is an early effort towards this goal and continues the work of facebook#4942. A suite of new unit tests exist in DBBasicTestWithTimestampWithParam. Support for timestamp requires the user to provide timestamp as a slice in `ReadOptions` and `WriteOptions`. All timestamps of the same database must share the same length, format, etc. The format of the timestamp is the same throughout the same database, and the user is responsible for providing a comparator function (Comparator) to order the <key, timestamp> tuples. Once created, the format and length of the timestamp cannot change (at least for now).
Test plan (on devserver):
```
$COMPILE_WITH_ASAN=1 make -j32 all
$./db_basic_test --gtest_filter=Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/*
$make check
```
All tests must pass.
We also run the following db_bench tests to verify whether there is regression on Get/Put while timestamp is not enabled.
```
$TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillseq,readrandom -num=1000000
$TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=1000000
```
Repeat for 6 times for both versions.
Results are as follows:
```
| | readrandom | fillrandom |
| master | 16.77 MB/s | 47.05 MB/s |
| PR5079 | 16.44 MB/s | 47.03 MB/s |
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5079
Differential Revision: D15132946
Pulled By: riversand963
fbshipit-source-id: 833a0d657eac21182f0f206c910a6438154c742c
Summary:
util/ means for lower level libraries. trace_replay is highly integrated to DB and sometimes call DB. Move it out to a separate directory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5376
Differential Revision: D15550938
Pulled By: siying
fbshipit-source-id: f46dce5ceffdc05a73f26379c7bb1b79ebe6c207
Summary:
Many logging related source files are under util/. It will be more structured if they are together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5387
Differential Revision: D15579036
Pulled By: siying
fbshipit-source-id: 3850134ed50b8c0bb40a0c8ae1f184fa4081303f
Summary:
log_write_bench doesn't compile due to some recent API changes.
This patch fixes the compile by adding the missing params for
OptimizeForLogWrite() and WritableFileWriter().
Signed-off-by: Yuan Zhou <yuan.zhou@intel.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5335
Differential Revision: D15588875
Pulled By: miasantreble
fbshipit-source-id: 726ff4dc227733e915c3b796df25bd3ab0b431ac
Summary:
Right now, with auto roll logger, options.keep_log_file_num enforcement is triggered by events like DB reopen or full obsolete scan happens. In the mean time, the size and number of log files can grow without a limit. We put a stronger enforcement to the option, so that the number of log files can always under control.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5370
Differential Revision: D15570413
Pulled By: siying
fbshipit-source-id: 0916c3c4d42ab8fdd29389ee7fd7e1557b03176e
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
util/ means for lower level libraries, so it's a good idea to move the files which requires knowledge to DB out. Create a file/ and move some files there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5375
Differential Revision: D15550935
Pulled By: siying
fbshipit-source-id: 61a9715dcde5386eebfb43e93f847bba1ae0d3f2
Summary:
The analyzer thinks max_allowed_ space can be 0. In that case, free_space will
be assigned as free_space. It fails to realize that the function call
GetFreeSpace actually sets the free_space variable properly, which is possibly
due to lack of inter-function call analysis.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5365
Differential Revision: D15521790
Pulled By: riversand963
fbshipit-source-id: 839d0a285a1c8773a28a385f0c3be4bb7fbe32cb
Summary:
If RocksDB is configured with a positive max_allowed_space (via sst file manager),
then the sst file manager should use this value instead of total free disk
space to determine whether to clear the background error of space limit
reached.
In DBSSTTest.DBWithMaxSpaceAllowed, we configure a low space limit that is very
likely lower than the free disk space of the test machine. Therefore, once the
test db encounters a Status::SpaceLimit, error handler will call into sst file
manager to start error recovery which may clear the bg error since disk free
space is larger than reserved_disk_buffer_.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5334
Differential Revision: D15501622
Pulled By: riversand963
fbshipit-source-id: 58035efc450b062d6b28c78c322005ec3705fb47
Summary:
Remove PATENTS related wording from a few stragglers which still reference the old PATENTS file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5326
Differential Revision: D15423297
Pulled By: sagar0
fbshipit-source-id: 4babcddfc120b7d2fed6eb3898287cf8012bf8ea
Summary:
In the current db_bench trace replay, the replay process strictly follows the timestamp to issue the queries. In some cases, user does not care about the time. Therefore, fast forward is needed for users to speed up the replay process.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5273
Differential Revision: D15389232
Pulled By: zhichao-cao
fbshipit-source-id: 735d629b9d2a167b05af3e4fa0ddf9d5d0be1806
Summary:
The recent improvement in https://github.com/facebook/rocksdb/pull/3661 could cause a deadlock: When writing recoverable state, we also commit its sequence number to commit table, which could result into evicting existing commit entry, which could result into advancing max_evicted_seq_, which would need to get snapshots from database, which requires obtaining db mutex. The patch releases db_mutex before calling the callback in WriteRecoverableState to avoid the potential deadlock. It also improves the stress tests to let the issue be manifested in the tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5306
Differential Revision: D15341458
Pulled By: maysamyabandeh
fbshipit-source-id: 05dcbed7e21b789fd1e5fd5ee8eea08077162323
Summary:
Part of compaction cpu goes to processing snapshot list, the larger the list the bigger the overhead. Although the lifetime of most of the snapshots is much shorter than the lifetime of compactions, the compaction conservatively operates on the list of snapshots that it initially obtained. This patch allows the snapshot list to be updated via a callback if the compaction is taking long. This should let the compaction to continue more efficiently with much smaller snapshot list.
For simplicity, to avoid the feature is disabled in two cases: i) When more than one sub-compaction are sharing the same snapshot list, ii) when Range Delete is used in which the range delete aggregator has its own copy of snapshot list.
This fixes the reverted https://github.com/facebook/rocksdb/pull/5099 issue with range deletes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5278
Differential Revision: D15203291
Pulled By: maysamyabandeh
fbshipit-source-id: fa645611e606aa222c7ce53176dc5bb6f259c258
Summary:
Our daily stress tests are failing after this feature. Reverting temporarily until we figure the reason for test failures.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5269
Differential Revision: D15151285
Pulled By: maysamyabandeh
fbshipit-source-id: e4002b99690a97df30d4b4b58bf0f61e9591bc6e
Summary:
Part of compaction cpu goes to processing snapshot list, the larger the list the bigger the overhead. Although the lifetime of most of the snapshots is much shorter than the lifetime of compactions, the compaction conservatively operates on the list of snapshots that it initially obtained. This patch allows the snapshot list to be updated via a callback if the compaction is taking long. This should let the compaction to continue more efficiently with much smaller snapshot list.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5099
Differential Revision: D15086710
Pulled By: maysamyabandeh
fbshipit-source-id: 7649f56c3b6b2fb334962048150142a3bf9c1a12
Summary:
Savepoints are assumed to be used in a stack-wise fashion (only
the top element should be used), so they were stored by `WriteBatch`
in a member variable `save_points` using an std::stack.
Conceptually this is fine, but the implementation had a few issues:
- the `save_points_` instance variable was a plain pointer to a heap-
allocated `SavePoints` struct. The destructor of `WriteBatch` simply
deletes this pointer. However, the copy constructor of WriteBatch
just copied that pointer, meaning that copying a WriteBatch with
active savepoints will very likely have crashed before. Now a proper
copy of the savepoints is made in the copy constructor, and not just
a copy of the pointer
- `save_points_` was an std::stack, which defaults to `std::deque` for
the underlying container. A deque is a bit over the top here, as we
only need access to the most recent savepoint (i.e. stack.top()) but
never any elements at the front. std::deque is rather expensive to
initialize in common environments. For example, the STL implementation
shipped with GNU g++ will perform a heap allocation of more than 500
bytes to create an empty deque object. Although the `save_points_`
container is created lazily by RocksDB, moving from a deque to a plain
`std::vector` is much more memory-efficient. So `save_points_` is now
a vector.
- `save_points_` was changed from a plain pointer to an `std::unique_ptr`,
making ownership more explicit.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5192
Differential Revision: D15024074
Pulled By: maysamyabandeh
fbshipit-source-id: 5b128786d3789cde94e46465c9e91badd07a25d7
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
Summary:
Introducing Periodic Compactions.
This feature allows all the files in a CF to be periodically compacted. It could help in catching any corruptions that could creep into the DB proactively as every file is constantly getting re-compacted. And also, of course, it helps to cleanup data older than certain threshold.
- Introduced a new option `periodic_compaction_time` to control how long a file can live without being compacted in a CF.
- This works across all levels.
- The files are put in the same level after going through the compaction. (Related files in the same level are picked up as `ExpandInputstoCleanCut` is used).
- Compaction filters, if any, are invoked as usual.
- A new table property, `file_creation_time`, is introduced to implement this feature. This property is set to the time at which the SST file was created (and that time is given by the underlying Env/OS).
This feature can be enabled on its own, or in conjunction with `ttl`. It is possible to set a different time threshold for the bottom level when used in conjunction with ttl. Since `ttl` works only on 0 to last but one levels, you could set `ttl` to, say, 1 day, and `periodic_compaction_time` to, say, 7 days. Since `ttl < periodic_compaction_time` all files in last but one levels keep getting picked up based on ttl, and almost never based on periodic_compaction_time. The files in the bottom level get picked up for compaction based on `periodic_compaction_time`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5166
Differential Revision: D14884441
Pulled By: sagar0
fbshipit-source-id: 408426cbacb409c06386a98632dcf90bfa1bda47
Summary:
Create new function NPHash64() and GetSliceNPHash64(), which are currently
implemented using murmurhash.
Replace the current direct call of murmurhash() to use the new functions
if the hash results are not used in on-disk format.
This will make it easier to try out or switch to alternative functions
in the uses where data format compatibility doesn't need to be considered.
This part shouldn't have any performance impact.
Also, the sharded cache hash function is changed to the new format, because
it falls into this categoery. It doesn't show visible performance impact
in db_bench results. CPU showed by perf is increased from about 0.2% to 0.4%
in an extreme benchmark setting (4KB blocks, no-compression, everything
cached in block cache). We've known that the current hash function used,
our own Hash() has serious hash quality problem. It can generate a lots of
conflicts with similar input. In this use case, it means extra lock contention
for reads from the same file. This slight CPU regression is worthy to me
to counter the potential bad performance with hot keys. And hopefully this
will get further improved in the future with a better hash function.
cache_test's condition is relaxed a little bit to. The new hash is slightly
more skewed in this use case, but I manually checked the data and see
the hash results are still in a reasonable range.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5155
Differential Revision: D14834821
Pulled By: siying
fbshipit-source-id: ec9a2c0a2f8ae4b54d08b13a5c2e9cc97aa80cb5
Summary:
Annotate all of the logging functions to inform the compiler that these
use printf-style formatting arguments. This allows the compiler to emit
warnings if the format arguments are incorrect.
This also fixes many problems reported now that format string checking
is enabled. Many of these are simply mix-ups in the argument type (e.g,
int vs uint64_t), but in several cases the wrong number of arguments
were being passed in which can cause the code to crash.
The primary motivation for this was to fix the log message in
`DBImpl::SwitchMemtable()` which caused a segfault due to an extra %s
format parameter with no argument supplied.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5089
Differential Revision: D14574795
Pulled By: simpkins
fbshipit-source-id: 0921b03f0743652bf4ae21e414ff54b3bb65422a
Summary:
Since we are planning to use dictionary compression and to use different compression level, it is quite useful to add compression options to TableProperties. For example, in MyRocks, if the feature is available, we can query from information_schema.rocksdb_sst_props to see if all sst files are converted to ZSTD dictionary compressions. Resolves https://github.com/facebook/rocksdb/issues/4992
With this PR, user can query table properties through `GetPropertiesOfAllTables` API and get compression options as std::string:
`window_bits=-14; level=32767; strategy=0; max_dict_bytes=0; zstd_max_train_bytes=0; enabled=0;`
or table_properties->ToString() will also contain it
`# data blocks=1; # entries=13; # deletions=0; # merge operands=0; # range deletions=0; raw key size=143; raw average key size=11.000000; raw value size=39; raw average value size=3.000000; data block size=120; index block size (user-key? 0, delta-value? 0)=27; filter block size=0; (estimated) table size=147; filter policy name=N/A; prefix extractor name=nullptr; column family ID=0; column family name=default; comparator name=leveldb.BytewiseComparator; merge operator name=nullptr; property collectors names=[]; SST file compression algo=Snappy; SST file compression options=window_bits=-14; level=32767; strategy=0; max_dict_bytes=0; zstd_max_train_bytes=0; enabled=0; ; creation time=1552946632; time stamp of earliest key=1552946632;`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5081
Differential Revision: D14716692
Pulled By: miasantreble
fbshipit-source-id: 7d2f2cf84e052bff876e71b4212cfdebf5be32dd
Summary:
**This PR updates RepeatableThread::wait, breaking some tests on OS X. The rest of the PR fixes the tests on OS X.**
`RepeatableThreadTest.MockEnvTest` uses `MockTimeEnv` and `RepeatableThread`. If `RepeatableThread::wait` calls `TimedWait` with a time smaller than or equal to the current (real) time, `TimedWait` returns immediately on certain platforms, e.g. OS X. #4560 addresses this issue by replacing `TimedWait` with `Wait` in test. This fixes the test but makes test/production code diverge, which is not optimal for test coverage. This PR proposes an alternative fix which unifies test and production code path for `RepeatableThread::wait`. We obtain the current (real) time in seconds and add 10 extra seconds to ensure that `RepeatableThread::wait` invokes `TimedWait` with a time greater than (real) current time. This is to prevent the `TimedWait` function from returning immediately without sleeping and releasing the mutex. If `TimedWait` returns immediately, the mutex will not be released, and `RepeatableThread::TEST_WaitForRun` never has a chance to execute the callback which, in this case, updates the result returned by `mock_env->NowMicros()`. Consequently, `RepeatableThread::wait` cannot break out of the loop, causing test to hang. The extra 10 seconds is a best-effort approach because there seems no reliable and deterministic way to provide the aforementioned guarantee. By the time `RepeatableThread::wait` is called, there is no guarantee that the `delay + mock_env->NowMicros()` will be greater than the current real time. However, 10 seconds should be sufficient in most cases. We will keep an eye for possible flakiness of this test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5107
Differential Revision: D14680885
Pulled By: riversand963
fbshipit-source-id: d1ecbe10e1dacd110bd464cd01e188bfee72b89e
Summary:
WAL files are currently not subject to deletion rate limiting by DeleteScheduler. If the size of the WAL files is significant, this can cause a high delete rate on SSDs that may affect other operations. To fix it, force WAL file deletions to go through the SstFileManager. Original PR for this is #2768
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5116
Differential Revision: D14669437
Pulled By: anand1976
fbshipit-source-id: c5f62d0640cebaa1574de841a1d01e4ce2faadf0
Summary:
Currently `perf_context.user_key_comparison_count` is bump only in `InternalKeyComparator`. For places user comparator is used directly the counter is not bump. Fixing the majority of it.
Index iterator and filter code also use user comparator directly and don't bump the counter. It is not fixed in this patch.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5098
Differential Revision: D14603753
Pulled By: siying
fbshipit-source-id: 1cd41035644ca9e49b97a51030a5d1e15f5f3cae
Summary:
This PR allows RocksDB to run in single-primary, multi-secondary process mode.
The writer is a regular RocksDB (e.g. an `DBImpl`) instance playing the role of a primary.
Multiple `DBImplSecondary` processes (secondaries) share the same set of SST files, MANIFEST, WAL files with the primary. Secondaries tail the MANIFEST of the primary and apply updates to their own in-memory state of the file system, e.g. `VersionStorageInfo`.
This PR has several components:
1. (Originally in #4745). Add a `PathNotFound` subcode to `IOError` to denote the failure when a secondary tries to open a file which has been deleted by the primary.
2. (Similar to #4602). Add `FragmentBufferedReader` to handle partially-read, trailing record at the end of a log from where future read can continue.
3. (Originally in #4710 and #4820). Add implementation of the secondary, i.e. `DBImplSecondary`.
3.1 Tail the primary's MANIFEST during recovery.
3.2 Tail the primary's MANIFEST during normal processing by calling `ReadAndApply`.
3.3 Tailing WAL will be in a future PR.
4. Add an example in 'examples/multi_processes_example.cc' to demonstrate the usage of secondary RocksDB instance in a multi-process setting. Instructions to run the example can be found at the beginning of the source code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4899
Differential Revision: D14510945
Pulled By: riversand963
fbshipit-source-id: 4ac1c5693e6012ad23f7b4b42d3c374fecbe8886
Eli Pozniansky