Summary:
Add `ReserveThreads` and `ReleaseThreads` functions in thread pool to support reservation in for a specific thread pool. With this feature, a thread will be blocked if the number of waiting threads (noted by `num_waiting_threads_`) equals the number of reserved threads (noted by `reserved_threads_`), normally `reserved_threads_` is upper bounded by `num_waiting_threads_`; in rare cases (e.g. `SetBackgroundThreadsInternal` is called when some threads are already reserved), `num_waiting_threads_` can be less than `reserved_threads`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10278
Test Plan: Add `ReserveThreads` unit test in `env_test`. Update the unit test `SimpleColumnFamilyInfoTest` in `thread_list_test` with adding `ReserveThreads` related assertions.
Reviewed By: hx235
Differential Revision: D37640946
Pulled By: littlepig2013
fbshipit-source-id: 4d691f6b9a433569f96ab52d52c3defe5b065367
Summary:
The blob cache enables an optimization on the read path: when a blob is found in the cache, we can avoid copying it into the buffer provided by the application. Instead, we can simply transfer ownership of the cache handle to the target `PinnableSlice`. (Note: this relies on the `Cleanable` interface, which is implemented by `PinnableSlice`.)
This has the potential to save a lot of CPU, especially with large blob values.
This task is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10297
Reviewed By: riversand963
Differential Revision: D37640311
Pulled By: gangliao
fbshipit-source-id: 92de0e35cc703d06c87c5c1861cc2899ec52234a
Summary:
When an element is first inserted into the ClockCache, it is now assigned either medium or high clock priority, depending on whether its cache priority is low or high, respectively. This is a variant of LRUCache's midpoint insertions. The main difference is that LRUCache can specify the allocated capacity for high-priority elements via the ``high_pri_pool_ratio`` parameter. Contrarily, in ClockCache, low- and high-priority elements compete for all cache slots, and one group can take over the other (of course, it takes more low-priority insertions to push out high-priority elements). However, just as LRUCache, ClockCache provides the following guarantee: a high-priority element will not be evicted before a low-priority element that was inserted earlier in time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10305
Test Plan: ``make -j24 check``
Reviewed By: pdillinger
Differential Revision: D37607787
Pulled By: guidotag
fbshipit-source-id: 24d9f2523d2f4e6415e7f0029cc061fa275c2040
Summary:
Earlier implementation of cutting the output files with a compact cursor under Round-Robin priority uses `Valid()` to determine if the `output_split_key` is valid in `ShouldStopBefore`. This contributes to excessive CPU computation, as pointed out by [this issue](https://github.com/facebook/rocksdb/issues/10315). In this PR, we change the type of `output_split_key` to be `InternalKey*` and set it as `nullptr` if it is not going to be used in `ShouldStopBefore`, `Valid()` condition checking can be avoided using that pointer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10316
Reviewed By: ajkr
Differential Revision: D37661492
Pulled By: littlepig2013
fbshipit-source-id: 66ff1105f3378e5573d3a126fdaff9bb23b5498f
Summary:
I noticed it would clean up some things to have Cache::Insert()
return our MemoryLimit Status instead of Incomplete for the case in
which the capacity limit is reached. I suspect this fixes some existing but
unknown bugs where this Incomplete could be confused with other uses
of Incomplete, especially no_io cases. This is the most suspicious case I
noticed, but was not able to reproduce a bug, in part because the existing
code is not covered by unit tests (FIXME added): 57adbf0e91/table/get_context.cc (L397)
I audited all the existing uses of IsIncomplete and updated those that
seemed relevant.
HISTORY updated with a clear warning to users of strict_capacity_limit=true
to update uses of `IsIncomplete()`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10262
Test Plan: updated unit tests
Reviewed By: hx235
Differential Revision: D37473155
Pulled By: pdillinger
fbshipit-source-id: 4bd9d9353ccddfe286b03ebd0652df8ce20f99cb
Summary:
This allows users to pass their git command with extra options if necessary.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10318
Reviewed By: ajkr
Differential Revision: D37661175
Pulled By: lth
fbshipit-source-id: 2a7cf27626c74f167471e6ec57e3870630a582b0
Summary:
…ta blocks
During MyShadow testing, ajkr helped me find out that with partitioned index and dictionary compression enabled, `PartitionedIndexIterator::InitPartitionedIndexBlock()` spent considerable amount of time (1-2% CPU) on fetching uncompression dictionary. Fetching uncompression dict was not needed since the index blocks were not compressed (and even if they were, they use empty dictionary). This should only affect use cases with partitioned index, dictionary compression and without uncompression dictionary pinned. This PR updates NewDataBlockIterator to not fetch uncompression dictionary when it is not for data blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10310
Test Plan:
1. `make check`
2. Perf benchmark: 1.5% (143950 -> 146176) improvement in op/sec for partitioned index + dict compression benchmark.
For default config without partitioned index and without dict compression, there is no regression in readrandom perf from multiple runs of db_bench.
```
# Set up for partitioned index with dictionary compression
TEST_TMPDIR=/dev/shm ./db_bench_main -benchmarks=filluniquerandom,compact -max_background_jobs=24 -memtablerep=vector -allow_concurrent_memtable_write=false -partition_index=true -compression_max_dict_bytes=16384 -compression_zstd_max_train_bytes=1638400
# Pre PR
TEST_TMPDIR=/dev/shm ./db_bench_main -use_existing_db=true -benchmarks=readrandom[-X50] -partition_index=true
readrandom [AVG 50 runs] : 143950 (± 1108) ops/sec; 15.9 (± 0.1) MB/sec
readrandom [MEDIAN 50 runs] : 144406 ops/sec; 16.0 MB/sec
# Post PR
TEST_TMPDIR=/dev/shm ./db_bench_opt -use_existing_db=true -benchmarks=readrandom[-X50] -partition_index=true
readrandom [AVG 50 runs] : 146176 (± 1121) ops/sec; 16.2 (± 0.1) MB/sec
readrandom [MEDIAN 50 runs] : 146014 ops/sec; 16.2 MB/sec
# Set up for no partitioned index and no dictionary compression
TEST_TMPDIR=/dev/shm/baseline ./db_bench_main -benchmarks=filluniquerandom,compact -max_background_jobs=24 -memtablerep=vector -allow_concurrent_memtable_write=false
# Pre PR
TEST_TMPDIR=/dev/shm/baseline/ ./db_bench_main --use_existing_db=true "--benchmarks=readrandom[-X50]"
readrandom [AVG 50 runs] : 158546 (± 1000) ops/sec; 17.5 (± 0.1) MB/sec
readrandom [MEDIAN 50 runs] : 158280 ops/sec; 17.5 MB/sec
# Post PR
TEST_TMPDIR=/dev/shm/baseline/ ./db_bench_opt --use_existing_db=true "--benchmarks=readrandom[-X50]"
readrandom [AVG 50 runs] : 161061 (± 1520) ops/sec; 17.8 (± 0.2) MB/sec
readrandom [MEDIAN 50 runs] : 161596 ops/sec; 17.9 MB/sec
```
Reviewed By: ajkr
Differential Revision: D37631358
Pulled By: cbi42
fbshipit-source-id: 6ca2665e270e63871968e061ba4a99d3136785d9
Summary:
Before this PR, we call `now()` to get the wall time before performing point-lookup and range
scans when user-defined timestamp is enabled.
With this PR, we expand the coverage to:
- read with an older timestamp which is larger then the wall time when the process starts but potentially smaller than now()
- add coverage for `ReadOptions::iter_start_ts != nullptr`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10280
Test Plan:
```bash
make check
```
Also,
```bash
TEST_TMPDIR=/dev/shm/rocksdb make crash_test_with_ts
```
So far, we have had four successful runs of the above
In addition,
```bash
TEST_TMPDIR=/dev/shm/rocksdb make crash_test
```
Succeeded twice showing no regression.
Reviewed By: ltamasi
Differential Revision: D37539805
Pulled By: riversand963
fbshipit-source-id: f2d9887ad95245945ce17a014d55bb93f00e1cb5
Summary:
Previously the version was displayed as $major.$minor
This changes it to $major.$minor.$path
This also adds the git hash for the time from which RocksDB was built to the end of report.tsv. I confirmed that benchmark_log_tool.py still parses it and that the people
who consume/graph these results are OK with it.
Example output:
ops_sec mb_sec lsm_sz blob_sz c_wgb w_amp c_mbps c_wsecs c_csecs b_rgb b_wgb usec_op p50 p99 p99.9 p99.99 pmax uptime stall% Nstall u_cpu s_cpu rss test date version job_id githash
609488 244.1 1GB 0.0GB, 1.4 0.7 93.3 39 38 0 0 1.6 1.0 4 15 26 5365 15 0.0 0 0.1 0.0 0.5 fillseq.wal_disabled.v400 2022-06-29T13:36:05 7.5.0 6115254416
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10277
Test Plan: Run it
Reviewed By: jay-zhuang
Differential Revision: D37532418
Pulled By: mdcallag
fbshipit-source-id: 55e472640d51265819b228d3373c9fa9b62b660d
Summary:
In leveled compaction, try to trivial move more than one files if possible, up to 4 files or max_compaction_bytes. This is to allow higher write throughput for some use cases where data is loaded in sequential order, where appying compaction results is the bottleneck.
When pick up a file to compact and it doesn't have overlapping files in the next level, try to expand to the next file if there is still no overlapping.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10190
Test Plan:
Add some unit tests.
For performance, Try to run
./db_bench_multi_move --benchmarks=fillseq --compression_type=lz4 --write_buffer_size=5000000 --num=100000000 --value_size=1000 -level_compaction_dynamic_level_bytes
Together with https://github.com/facebook/rocksdb/pull/10188 , stalling will be eliminated in this benchmark.
Reviewed By: jay-zhuang
Differential Revision: D37230647
fbshipit-source-id: 42b260f545c46abc5d90335ac2bbfcd09602b549
Summary:
Before this PR, it is required that application open RocksDB secondary
instance with `max_open_files = -1`. This is a hacky workaround that
prevents IOErrors on the seconary instance during point-lookup or range
scan caused by primary instance deleting the table files. This is not
necessary if the application can coordinate the primary and secondaries
so that primary does not delete files that are still being used by the
secondaries. Or users can provide a custom Env/FS implementation that
deletes the files only after all primary and secondary instances
indicate files are obsolete and deleted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10260
Test Plan: make check
Reviewed By: jay-zhuang
Differential Revision: D37462633
Pulled By: riversand963
fbshipit-source-id: 9c2fc939f49663efa61e3d60c8f1e01d64b9d72c
Summary:
In some case, GetFileSize would be failure in copy_file_cb.
If failure, we can return immediately, the subsequent code
is meaningless, and add a log info let user know that problem
happen here.
Singed-off-by: Yite Gu <ess_gyt@qq.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10176
Reviewed By: cbi42
Differential Revision: D37510888
Pulled By: ajkr
fbshipit-source-id: 044ad8c45852fd19b8cd564b11f65d40c39e296f
Summary:
We fix two bugs in CalcHashBits. The first one is an off-by-one error: the desired number of table slots is the real number ``capacity / (kLoadFactor * handle_charge)``, which should not be rounded down. The second one is that we should disallow inputs that set the element charge to 0, namely ``estimated_value_size == 0 && metadata_charge_policy == kDontChargeCacheMetadata``.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10295
Test Plan: CalcHashBits is tested by CalcHashBitsTest (in lru_cache_test.cc). The test now iterates over many more inputs; it covers, in particular, the rounding error edge case. Overall, the test is now more robust. Run ``make -j24 check``.
Reviewed By: pdillinger
Differential Revision: D37573797
Pulled By: guidotag
fbshipit-source-id: ea4f4439f7196ab1c1afb88f566fe92850537262
Summary:
If dbname and db_log_dir are at different filesystems (one
local and one remote), creation of dbname will fail because that path
doesn't exist wrt to db_log_dir.
This patch will ignore the error returned on creation of dbname. If they
are on same filesystem, db_log_dir creation will automatically return
the error in case there is any error in creation of dbname.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10292
Test Plan: Existing unit tests
Reviewed By: riversand963
Differential Revision: D37567773
Pulled By: akankshamahajan15
fbshipit-source-id: 005d28c536208d4c126c8cb8e196d1d85b881100
Summary:
In leveled compaction, L0->L1 trivial move will allow more than one file to be moved in one compaction. This would allow L0 files to be moved down faster when data is loaded in sequential order, making slowdown or stop condition harder to hit. Also seek L0->L1 trivial move when only some files qualify.
1. We always try to find L0->L1 trivial move from the oldest files. Keep including newer files, until adding a new file won't trigger a trivial move
2. Modify the trivial move condition so that this compaction would be tagged as trivial move.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10188
Test Plan:
See throughput improvements with db_bench with fast fillseq benchmark and small L0 files:
./db_bench_l0_move --benchmarks=fillseq --compression_type=lz4 --write_buffer_size=5000000 --num=100000000 --value_size=1000 -level_compaction_dynamic_level_bytes
The throughput improved by about 50%. Stalling still happens though.
Reviewed By: jay-zhuang
Differential Revision: D37224743
fbshipit-source-id: 8958d97f22e12bdfc14d2e85930f6fa0070e9659
Summary:
In round-robin compaction priority, when splitting the compaction into sub-compactions, the earlier implementation takes into account the compact cursor to have full use of available sub-compactions. But this may result in unbalanced sub-compactions, so we remove this here. The removal does not affect the cursor-based splitting mechanism within a sub-compaction, and thus the output files are still ensured to be split according to the cursor.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10289
Reviewed By: ajkr
Differential Revision: D37559091
Pulled By: littlepig2013
fbshipit-source-id: b8b45b99f63b09cf873f7f049bcb4ab13871fffc
Summary:
This adds --undefok to support use of this script with BlobDB for db_bench versions prior
to 7.5 when the options land in a release.
While there is a limit to how far back this script can go WRT backwards compatiblity,
this is an easy change to support early 7.x releases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10276
Test Plan: Run it with versions of db_bench that do not and then do support these options
Reviewed By: gangliao
Differential Revision: D37529299
Pulled By: mdcallag
fbshipit-source-id: 7bb1feec5c68760e6d64792c585bfbde4f5e52d8
Summary:
The current level targets for dynamical leveling has a problem: the target level size will dramatically change after a L0->L1 compaction. When there are many L0 bytes, lower level compactions are delayed, but they will be resumed after the L0->L1 compaction finishes, so the expected write amplification benefits might not be realized. The proposal here is to revert the level targetting size, but instead relying on adjusting score for each level to prioritize levels that need to compact most.
Basic idea:
(1) target level size isn't adjusted, but score is adjusted. The reasoning is that with parallel compactions, holding compactions from happening might not be desirable, but we would like the compactions are scheduled from the level we feel most needed. For example, if we have a extra-large L2, we would like all compactions are scheduled for L2->L3 compactions, rather than L4->L5. This gets complicated when a large L0->L1 compaction is going on. Should we compact L2->L3 or L4->L5. So the proposal for that is:
(2) the score is calculated by actual level size / (target size + estimated upper bytes coming down). The reasoning is that if we have a large amount of pending L0/L1 bytes coming down, compacting L2->L3 might be more expensive, as when the L0 bytes are compacted down to L2, the actual L2->L3 fanout would change dramatically. On the other hand, when the amount of bytes coming down to L5, the impacts to L5->L6 fanout are much less. So when calculating target score, we can adjust it by adding estimated downward bytes to the target level size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10057
Test Plan: Repurpose tests VersionStorageInfoTest.MaxBytesForLevelDynamicWithLargeL0_* tests to cover this scenario.
Reviewed By: ajkr
Differential Revision: D37539742
fbshipit-source-id: 9c154cbfe92023f918cf5d80875d8776ad4831a4
Summary:
- [x] Enabled blob caching for MultiGetBlob in RocksDB
- [x] Refactored MultiGetBlob logic and interface in RocksDB
- [x] Cleaned up Version::MultiGetBlob() and moved 'blob'-related code snippets into BlobSource
- [x] Add End-to-end test cases in db_blob_basic_test and also add unit tests in blob_source_test
This task is a part of https://github.com/facebook/rocksdb/issues/10156
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10272
Reviewed By: ltamasi
Differential Revision: D37558112
Pulled By: gangliao
fbshipit-source-id: a73a6a94ffdee0024d5b2a39e6d1c1a7d38664db
Summary:
Add load_latest_options() to C api.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10152
Test Plan:
Extend the existing c_test by reopening db using the latest options file
at different parts of the test.
Reviewed By: akankshamahajan15
Differential Revision: D37305225
Pulled By: ajkr
fbshipit-source-id: 8b3bab73f56fa6fcbdba45aae393145d007b3962
Summary:
If the internal iterator is not valid, `SeekToLast` with iter_start_ts should have `valid_` is false without assertion failure.
Test plan
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10279
Reviewed By: ltamasi
Differential Revision: D37539393
Pulled By: riversand963
fbshipit-source-id: 8e94057838f8a05144fad5768f4d62f1893ec315
Summary:
This is the initial step in the development of a lock-free clock cache. This PR includes the base hash table design (which we mostly ported over from FastLRUCache) and the clock eviction algorithm. Importantly, it's still _not_ lock-free---all operations use a shard lock. Besides the locking, there are other features left as future work:
- Remove keys from the handles. Instead, use 128-bit bijective hashes of them for handle comparisons, probing (we need two 32-bit hashes of the key for double hashing) and sharding (we need one 6-bit hash).
- Remove the clock_usage_ field, which is updated on every lookup. Even if it were atomically updated, it could cause memory invalidations across cores.
- Middle insertions into the clock list.
- A test that exercises the clock eviction policy.
- Update the Java API of ClockCache and Java calls to C++.
Along the way, we improved the code and comments quality of FastLRUCache. These changes are relatively minor.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10273
Test Plan: ``make -j24 check``
Reviewed By: pdillinger
Differential Revision: D37522461
Pulled By: guidotag
fbshipit-source-id: 3d70b737dbb70dcf662f00cef8c609750f083943
Summary:
`GetWindowsErrSz` may assign a `nullptr` to `std::string` in the event it cannot format the error code to a string. This will result in a crash when `std::string` attempts to calculate the length from `nullptr`.
The change here checks the output from `FormatMessageA` and only assigns to the otuput `std::string` if it is not null. Additionally, the call to free the buffer is only made if a non-null value is returned from `FormatMessageA`. In the event `FormatMessageA` does not output a string, an empty string is returned instead.
Fixes https://github.com/facebook/rocksdb/issues/10274
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10282
Reviewed By: riversand963
Differential Revision: D37542143
Pulled By: ajkr
fbshipit-source-id: c21f5119ddb451f76960acec94639d0f538052f2
Summary:
Currently, when installing a new super version, when stalling condition triggers, we compare estimated compaction bytes to previously, and if the new value is larger or equal to the previous one, we reduce the slowdown write rate. However, if concurrent compactions happen, the same value might be used. The result is that, although some compactions reduce estimated compaction bytes, we treat them as a signal for further slowing down. In some cases, it causes slowdown rate drops all the way to the minimum, far lower than needed.
Fix the bug by not triggering a re-calculation if a new super version doesn't have Version or a memtable change. With this fix, number of compaction finishes are still undercounted in this algorithm, but it is still better than the current bug where they are negatively counted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10270
Test Plan: Run a benchmark where the slowdown rate is dropped to minimal unnessarily and see it is back to a normal value.
Reviewed By: ajkr
Differential Revision: D37497327
fbshipit-source-id: 9bca961cc38fed965c3af0fa6c9ca0efaa7637c4
Summary:
Resolves https://github.com/facebook/rocksdb/issues/9761
With this PR, applications can create an iterator with the following
```cpp
ReadOptions read_opts;
read_opts.timestamp = &ts_ub;
read_opts.iter_start_ts = &ts_lb;
auto* it = db->NewIterator(read_opts);
it->SeekToLast();
// or it->SeekForPrev("foo");
it->Prev();
...
```
The application can access different versions of the same user key via `key()`, `value()`, and `timestamp()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10200
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D37258074
Pulled By: riversand963
fbshipit-source-id: 3f0b866ade50dcff7ef60d506397a9dd6ec91565
Summary:
Most of the properties listed as required for prefix extractors
are not really required but offer some conveniences. This updates API
comments to clarify actual requirements, and adds tests to demonstrate
how previously presumed requirements can be safely violated.
This might seem like a useless exercise, but this relaxing of requirements
would be needed if we generalize prefixes to group keys not just at the
byte level but also based on bits or arbitrary value ranges. For
applications without a "natural" prefix size, having only byte-level
granularity often means one prefix size to the next differs in magnitude
by a factor of 256.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10245
Test Plan: Tests added, also covering missing Iterator cases from https://github.com/facebook/rocksdb/issues/10244
Reviewed By: bjlemaire
Differential Revision: D37371559
Pulled By: pdillinger
fbshipit-source-id: ab2dd719992eea7656e9042cf8542393e02fa244
Summary:
We saw flakes with the following failure:
```
[ RUN ] RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/1
utilities/backup/backup_engine_test.cc:2667: Failure
Expected: (restore_time) > (0.8 * rate_limited_restore_time), actual: 48269 vs 60470.4
terminate called after throwing an instance of 'testing::internal::GoogleTestFailureException'
what(): utilities/backup/backup_engine_test.cc:2667: Failure
Expected: (restore_time) > (0.8 * rate_limited_restore_time), actual: 48269 vs 60470.4
Received signal 6 (Aborted)
t/run-backup_engine_test-RateLimiting-BackupEngineRateLimitingTestWithParam.RateLimiting-1: line 4: 1032887 Aborted (core dumped) TEST_TMPDIR=$d ./backup_engine_test --gtest_filter=RateLimiting/BackupEngineRateLimitingTestWithParam.RateLimiting/1
```
Investigation revealed we forgot to use the mock time `SystemClock` for
restore rate limiting. Then the test used wall clock time, which made
the execution of "GenericRateLimiter::Request:PostTimedWait"
non-deterministic as wall clock time might have advanced enough that
waiting was not needed.
This PR changes restore rate limiting to use
mock time, which guarantees we always execute
"GenericRateLimiter::Request:PostTimedWait". Then the assertions that
rely on times recorded inside that callback should be robust.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10271
Test Plan:
Applied the following patch which guaranteed repro before the fix.
Verified the test passes after this PR even with that patch applied.
```
diff --git a/util/rate_limiter.cc b/util/rate_limiter.cc
index f369e3220..6b3ed82fa 100644
--- a/util/rate_limiter.cc
+++ b/util/rate_limiter.cc
@@ -158,6 +158,7 @@ void GenericRateLimiter::SetBytesPerSecond(int64_t bytes_per_second) {
void GenericRateLimiter::Request(int64_t bytes, const Env::IOPriority pri,
Statistics* stats) {
+ usleep(100000);
assert(bytes <= refill_bytes_per_period_.load(std::memory_order_relaxed));
bytes = std::max(static_cast<int64_t>(0), bytes);
TEST_SYNC_POINT("GenericRateLimiter::Request");
```
Reviewed By: hx235
Differential Revision: D37499848
Pulled By: ajkr
fbshipit-source-id: fd790d5a192996be8ba13b656751ccc7d8cb8f6e
Summary:
The `bytes_read` returned by the current BlobSource interface is ambiguous. The uncompressed blob size is returned if the cache hits. The size of the blob read from disk, presumably the compressed version, is returned if the cache misses. Two differing semantics might cause ambiguity and consistency issues. For example, this inconsistency causes the assertion failure (T124246362 and its hot fix is https://github.com/facebook/rocksdb/issues/10249).
This goal is to require that the value of `byte read` always be an on-disk blob record size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10248
Reviewed By: ltamasi
Differential Revision: D37470292
Pulled By: gangliao
fbshipit-source-id: fbca521b2791d3674dbf2484cea5fcae2fdd94d2
Summary:
The patch fixes a couple of issues related to in-place updates: 1) the value type was not passed from
`MemTableInserter::PutCFImpl` to `MemTable::Update` and 2) `MemTable::UpdateCallback` was called
for any value type (with the callee's logic assuming `kTypeValue`) even though the callback mechanism
is only safe for plain values.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10254
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D37463644
Pulled By: ltamasi
fbshipit-source-id: 33802477dac0691681f416ae84c4d9742c6fe41a
Summary:
Before this PR, when user-defined timestamp is enabled, db_stress disables compaction filter.
This is no longer necessary after this PR, since the `DbStressCompactionFilter` is now aware of
the presence of timestamps.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10259
Test Plan: TEST_TMPDIR=/dev/shm make crash_test_with_ts
Reviewed By: ajkr
Differential Revision: D37459692
Pulled By: riversand963
fbshipit-source-id: 8fe62e90a63bd9317fe1bb95a2b4984080c9e5ef
Summary:
The patch builds on https://github.com/facebook/rocksdb/pull/9915 and adds
a new API called `PutEntity` that can be used to write a wide-column entity
to the database. The new API is added to both `DB` and `WriteBatch`. Note
that currently there is no way to retrieve these entities; more precisely, all
read APIs (`Get`, `MultiGet`, and iterator) return `NotSupported` when they
encounter a wide-column entity that is required to answer a query. Read-side
support (as well as other missing functionality like `Merge`, compaction filter,
and timestamp support) will be added in later PRs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10242
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D37369748
Pulled By: ltamasi
fbshipit-source-id: 7f5e412359ed7a400fd80b897dae5599dbcd685d
Summary:
Need to disable it for now as CI is failing, particularly `MultiOpsTxnsStressTest`. Investigation details in internal task T124324915. This PR disables mempurge more widely than `MultiOpsTxnsStressTest` until we know the issue is contained to that particular test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10252
Reviewed By: riversand963
Differential Revision: D37432948
Pulled By: ajkr
fbshipit-source-id: d0cf5b0e0ec7c3142c382a0347f35a4c34f4607a
Summary:
With https://github.com/facebook/rocksdb/pull/9996 , we can pass the rate_limiter_priority to FS for most cases. This PR is to update the code path for filter block reader.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10251
Test Plan: Current unit tests should pass.
Reviewed By: pdillinger
Differential Revision: D37427667
Pulled By: gitbw95
fbshipit-source-id: 1ce5b759b136efe4cfa48a6b97e2f837ff087433
Summary:
The 'PersistRoundRobinCompactCursor' unit test in `db_compaction_test` may occasionally fail due to the inconsistent LSM state. The issue is fixed by adding `Flush()` and `WaitForFlushMemTable()` to produce a more predictable and stable LSM state.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10250
Test Plan: 'PersistRoundRobinCompactCursor' unit test in `db_compaction_test`
Reviewed By: jay-zhuang, riversand963
Differential Revision: D37426091
Pulled By: littlepig2013
fbshipit-source-id: 56fbaab0384c380c1f279a16dc8732b139c9f611
Summary:
Currently SortFileByOverlappingRatio() is O(nlogn). It is usually OK but When there are a lot of files in an LSM-tree, SortFileByOverlappingRatio() can take non-trivial amount of time. The problem is severe when the user is loading keys in sorted order, where compaction is only trivial move and this operation becomes the bottleneck and limit the total throughput. This commit makes SortFileByOverlappingRatio() only find the top 50 files based on score. 50 files are usually enough for the parallel compactions needed for the level, and in case it is not enough, we would fall back to random, which should be acceptable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10161
Test Plan:
Run a fillseq that generates a lot of files, and observe throughput improved (although stall is not yet eliminated). The command ran:
TEST_TMPDIR=/dev/shm/ ./db_bench_sort --benchmarks=fillseq --compression_type=lz4 --write_buffer_size=5000000 --num=100000000 --value_size=1000
The throughput improved by 11%.
Reviewed By: jay-zhuang
Differential Revision: D37129469
fbshipit-source-id: 492da2ef5bfc7cdd6daa3986b50d2ff91f88542d
Summary:
This task is to fix assertion failures during the crash test runs. The cache entry size might not match value size because value size can include the on-disk (possibly compressed) size. Therefore, we removed the assertions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10249
Reviewed By: ltamasi
Differential Revision: D37407576
Pulled By: gangliao
fbshipit-source-id: 577559f267c5b2437bcd0631cd0efabb6dde3b69
Summary:
Resolves https://github.com/facebook/rocksdb/issues/10129
I extracted this fix from https://github.com/facebook/rocksdb/issues/7516 since it's also already a bug in main branch, and we want to
separate it from the main part of the PR.
There can be a race condition between two threads. Thread 1 executes
`DBImpl::FindObsoleteFiles()` while thread 2 executes `GetSortedWals()`.
```
Time thread 1 thread 2
| mutex_.lock
| read disable_delete_obsolete_files_
| ...
| wait on log_sync_cv and release mutex_
| mutex_.lock
| ++disable_delete_obsolete_files_
| mutex_.unlock
| mutex_.lock
| while (pending_purge_obsolete_files > 0) { bg_cv.wait;}
| wake up with mutex_ locked
| compute WALs tracked by MANIFEST
| mutex_.unlock
| wake up with mutex_ locked
| ++pending_purge_obsolete_files_
| mutex_.unlock
|
| delete obsolete WAL
| WAL missing but tracked in MANIFEST.
V
```
The fix proposed eliminates the possibility of the above by increasing
`pending_purge_obsolete_files_` before `FindObsoleteFiles()` can possibly release the mutex.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10187
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D37214235
Pulled By: riversand963
fbshipit-source-id: 556ab1b58ae6d19150169dfac4db08195c797184
zczhu