Summary:
https://github.com/facebook/rocksdb/issues/11653 broke some crash tests.
Apparently these Rollbacks are needed for pessimistic transaction cases. (I'm still not sure if the API makes any sense with regard to safe usage. It's certainly not documented. Will consider in follow-up PRs.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11656
Test Plan: manual crash test runs, crash_test_with_multiops_wc_txn and crash_test_with_multiops_wp_txn
Reviewed By: cbi42
Differential Revision: D47906280
Pulled By: pdillinger
fbshipit-source-id: d058a01b6dbb47a4f08d199e335364168304f81b
Summary:
## Context checksum
All RocksDB checksums currently use 32 bits of checking
power, which should be 1 in 4 billion false negative (FN) probability (failing to
detect corruption). This is true for random corruptions, and in some cases
small corruptions are guaranteed to be detected. But some possible
corruptions, such as in storage metadata rather than storage payload data,
would have a much higher FN rate. For example:
* Data larger than one SST block is replaced by data from elsewhere in
the same or another SST file. Especially with block_align=true, the
probability of exact block size match is probably around 1 in 100, making
the FN probability around that same. Without `block_align=true` the
probability of same block start location is probably around 1 in 10,000,
for FN probability around 1 in a million.
To solve this problem in new format_version=6, we add "context awareness"
to block checksum checks. The stored and expected checksum value is
modified based on the block's position in the file and which file it is in. The
modifications are cleverly chosen so that, for example
* blocks within about 4GB of each other are guaranteed to use different context
* blocks that are offset by exactly some multiple of 4GiB are guaranteed to use
different context
* files generated by the same process are guaranteed to use different context
for the same offsets, until wrap-around after 2^32 - 1 files
Thus, with format_version=6, if a valid SST block and checksum is misplaced,
its checksum FN probability should be essentially ideal, 1 in 4B.
## Footer checksum
This change also adds checksum protection to the SST footer (with
format_version=6), for the first time without relying on whole file checksum.
To prevent a corruption of the format_version in the footer (e.g. 6 -> 5) to
defeat the footer checksum, we change much of the footer data format
including an "extended magic number" in format_version 6 that would be
interpreted as empty index and metaindex block handles in older footer
versions. We also change the encoding of handles to free up space for
other new data in footer.
## More detail: making space in footer
In order to keep footer the same size in format_version=6 (avoid change to IO
patterns), we have to free up some space for new data. We do this two ways:
* Metaindex block handle is encoded down to 4 bytes (from 10) by assuming
it immediately precedes the footer, and by assuming it is < 4GB.
* Index block handle is moved into metaindex. (I don't know why it was
in footer to begin with.)
## Performance
In case of small performance penalty, I've made a "pay as you go" optimization
to compensate: replace `MutableCFOptions` in BlockBasedTableBuilder::Rep
with the only field used in that structure after construction: `prefix_extractor`.
This makes the PR an overall performance improvement (results below).
Nevertheless I'm seeing essentially no difference going from fv=5 to fv=6,
even including that improvement for both. That's based on extreme case table
write performance testing, many files with many blocks. This is relatively
checksum intensive (small blocks) and salt generation intensive (small files).
```
(for I in `seq 1 100`; do TEST_TMPDIR=/dev/shm/dbbench2 ./db_bench -benchmarks=fillseq -memtablerep=vector -disable_wal=1 -allow_concurrent_memtable_write=false -num=3000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -write_buffer_size=100000 -compression_type=none -block_size=1000; done) 2>&1 | grep micros/op | tee out
awk '{ tot += $5; n += 1; } END { print int(1.0 * tot / n) }' < out
```
Each value below is ops/s averaged over 100 runs, run simultaneously with competing
configuration for load fairness
Before -> after (both fv=5): 483530 -> 483673 (negligible)
Re-run 1: 480733 -> 485427 (1.0% faster)
Re-run 2: 483821 -> 484541 (0.1% faster)
Before (fv=5) -> after (fv=6): 482006 -> 485100 (0.6% faster)
Re-run 1: 482212 -> 485075 (0.6% faster)
Re-run 2: 483590 -> 484073 (0.1% faster)
After fv=5 -> after fv=6: 483878 -> 485542 (0.3% faster)
Re-run 1: 485331 -> 483385 (0.4% slower)
Re-run 2: 485283 -> 483435 (0.4% slower)
Re-run 3: 483647 -> 486109 (0.5% faster)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9058
Test Plan:
unit tests included (table_test, db_properties_test, salt in env_test). General DB tests
and crash test updated to test new format_version.
Also temporarily updated the default format version to 6 and saw some test failures. Almost all
were due to an inadvertent additional read in VerifyChecksum to verify the index block checksum,
though it's arguably a bug that VerifyChecksum does not appear to (re-)verify the index block
checksum, just assuming it was verified in opening the index reader (probably *usually* true but
probably not always true). Some other concerns about VerifyChecksum are left in FIXME
comments. The only remaining test failure on change of default (in block_fetcher_test) now
has a comment about how to upgrade the test.
The format compatibility test does not need updating because we have not updated the default
format_version.
Reviewed By: ajkr, mrambacher
Differential Revision: D33100915
Pulled By: pdillinger
fbshipit-source-id: 8679e3e572fa580181a737fd6d113ed53c5422ee
Summary:
In rare cases, optimistic transaction commit returns TryAgain. This change tolerates that intentional behavior in db_stress, up to a small limit in a row. This way, we don't miss a possible regression with excessive TryAgain, and trying again (rolling back the transaction) should have a well renewed chance of success as the writes will be associated with fresh sequence numbers.
Also, some of the APIs were not clear about Transaction semantics, so I have clarified:
* (Best I can tell....) Destroying a Transaction is safe without calling Rollback() (or at least should be). I don't know why it's a common pattern in our test code and examples to rollback before unconditional destruction. Stress test updated not to call Rollback unnecessarily (to test safe destruction).
* Despite essentially doing what is asked, simply trying Commit() again when it returns TryAgain does not have a chance of success, because of the transaction being bound to the DB state at the time of operations before Commit. Similar logic applies to Busy AFAIK. Commit() API comments updated, and expanded unit test in optimistic_transaction_test.
Also also, because I can't stop myself, I refactored a good portion of the transaction handling code in db_stress.
* Avoid existing and new copy-paste for most transaction interactions with a new ExecuteTransaction (higher-order) function.
* Use unique_ptr (nicely complements removing unnecessary Rollbacks)
* Abstract out a pattern for safely calling std::terminate() and use it in more places. (The TryAgain errors we saw did not have stack traces because of "terminate called recursively".)
Intended follow-up: resurrect use of `FLAGS_rollback_one_in` but also include non-trivial cases
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11653
Test Plan:
this is the test :)
Also, temporarily bypassed the new retry logic and boosted the chance of hitting TryAgain. Quickly reproduced the TryAgain error. Then re-enabled the new retry logic, and was not able to hit the error after running for tens of minutes, even with the boosted chances.
Reviewed By: cbi42
Differential Revision: D47882995
Pulled By: pdillinger
fbshipit-source-id: 21eadb1525423340dbf28d17cf166b9583311a0d
Summary:
Some trailing whitespace has leaked into HISTORY.md entries. This can lead to unexpected changes when modifying HISTORY.md with hygienic editors (e.g. for a patch release). This change should protect against future cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11652
Test Plan: manual
Reviewed By: akankshamahajan15
Differential Revision: D47882814
Pulled By: pdillinger
fbshipit-source-id: 148c3746d3b298cb6e1f655f0416d46619969086
Summary:
... to improve data integrity validation during compaction.
A new option `compaction_verify_record_count` is introduced for this verification and is enabled by default. One exception when the verification is not done is when a compaction filter returns kRemoveAndSkipUntil which can cause CompactionIterator to seek until some key and hence not able to keep track of the number of keys processed.
For expected number of input keys, we sum over the number of total keys - number of range tombstones across compaction input files (`CompactionJob::UpdateCompactionStats()`). Table properties are consulted if `FileMetaData` is not initialized for some input file. Since table properties for all input files were also constructed during `DBImpl::NotifyOnCompactionBegin()`, `Compaction::GetTableProperties()` is introduced to reduce duplicated code.
For actual number of keys processed, each subcompaction will record its number of keys processed to `sub_compact->compaction_job_stats.num_input_records` and aggregated when all subcompactions finish (`CompactionJob::AggregateCompactionStats()`). In the case when some subcompaction encountered kRemoveAndSkipUntil from compaction filter and does not have accurate count, it propagates this information through `sub_compact->compaction_job_stats.has_num_input_records`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11571
Test Plan:
* Add a new unit test `DBCompactionTest.VerifyRecordCount` for the corruption case.
* All other unit tests for non-corrupted case.
* Ran crash test for a few hours: `python3 ./tools/db_crashtest.py whitebox --simple`
Reviewed By: ajkr
Differential Revision: D47131965
Pulled By: cbi42
fbshipit-source-id: cc8e94565dd526c4347e9d3843ecf32f6727af92
Summary:
Add a built-in comparator that supports uint64_t style user-defined timestamps for ReverseBytewiseComparator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11647
Test Plan:
Added a test wrapper for retrieving this comparator from registry and used it in this test:
`./udt_util_test`
Reviewed By: ltamasi
Differential Revision: D47848303
Pulled By: jowlyzhang
fbshipit-source-id: 5af5534a8c2d9195997d0308c8e194c1c797548c
Summary:
Fix use_after_free bug in async_io MultiReads when underlying FS enabled kFSBuffer. kFSBuffer is when underlying FS pass their own buffer instead of using RocksDB scratch in FSReadRequest
Since it's an experimental feature, added a hack for now to fix the bug.
Planning to make public API change to remove const from the callback as it doesn't make sense to use const.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11645
Test Plan: tested locally
Reviewed By: ltamasi
Differential Revision: D47819907
Pulled By: akankshamahajan15
fbshipit-source-id: 1faf5ef795bf27e2b3a60960374d91274931df8d
Summary:
Add support to allow enabling / disabling user-defined timestamps feature for an existing column family in combination with the in-Memtable only feature.
To do this, this PR includes:
1) Log the `persist_user_defined_timestamps` option per column family in Manifest to facilitate detecting an attempt to enable / disable UDT. This entry is enforced to be logged in the same VersionEdit as the user comparator name entry.
2) User-defined timestamps related options are validated when re-opening a column family, including user comparator name and the `persist_user_defined_timestamps` flag. These type of settings and settings change are considered valid:
a) no user comparator change and no effective `persist_user_defined_timestamp` flag change.
b) switch user comparator to enable UDT provided the immediately effective `persist_user_defined_timestamps` flag
is false.
c) switch user comparator to disable UDT provided that the before-change `persist_user_defined_timestamps` is
already false.
3) when an attempt to enable UDT is detected, we mark all its existing SST files as "having no UDT" by marking its `FileMetaData.user_defined_timestamps_persisted` flag to false and handle their file boundaries `FileMetaData.smallest`, `FileMetaData.largest` by padding a min timestamp.
4) while enabling / disabling UDT feature, timestamp size inconsistency in existing WAL logs are handled to make it compatible with the running user comparator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11623
Test Plan:
```
make all check
./db_with_timestamp_basic_test --gtest-filter="*EnableDisableUDT*"
./db_wal_test --gtest_filter="*EnableDisableUDT*"
```
Reviewed By: ltamasi
Differential Revision: D47636862
Pulled By: jowlyzhang
fbshipit-source-id: dcd19f67292da3c3cc9584c09ad00331c9ab9322
Summary:
Make flush respect the cutoff timestamp `full_history_ts_low` as much as possible for the user-defined timestamps in Memtables only feature. We achieve this by not proceeding with the actual flushing but instead reschedule the same `FlushRequest` so a follow up flush job can continue with the check after some interval.
This approach doesn't work well for atomic flush, so this feature currently is not supported in combination with atomic flush. Furthermore, this approach also requires a customized method to get the next immediately bigger user-defined timestamp. So currently it's limited to comparator that use uint64_t as the user-defined timestamp format. This support can be extended when we add such a customized method to `AdvancedColumnFamilyOptions`.
For non atomic flush request, at any single time, a column family can only have as many as one FlushRequest for it in the `flush_queue_`. There is deduplication done at `FlushRequest` enqueueing(`SchedulePendingFlush`) and dequeueing time (`PopFirstFromFlushQueue`). We hold the db mutex between when a `FlushRequest` is popped from the queue and the same FlushRequest get rescheduled, so no other `FlushRequest` with a higher `max_memtable_id` can be added to the `flush_queue_` blocking us from re-enqueueing the same `FlushRequest`.
Flush is continued nevertheless if there is risk of entering write stall mode had the flush being postponed, e.g. due to accumulation of write buffers, exceeding the `max_write_buffer_number` setting. When this happens, the newest user-defined timestamp in the involved Memtables need to be tracked and we use it to increase the `full_history_ts_low`, which is an inclusive cutoff timestamp for which RocksDB promises to keep all user-defined timestamps equal to and newer than it.
Tet plan:
```
./column_family_test --gtest_filter="*RetainUDT*"
./memtable_list_test --gtest_filter="*WithTimestamp*"
./flush_job_test --gtest_filter="*WithTimestamp*"
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11599
Reviewed By: ajkr
Differential Revision: D47561586
Pulled By: jowlyzhang
fbshipit-source-id: 9400445f983dd6eac489e9dd0fb5d9b99637fe89
Summary:
this is stacked on https://github.com/facebook/rocksdb/issues/11550 to further clarify usage of these two options for universal compaction. Similar to FIFO, the two options have the same meaning for universal compaction, which can be confusing to use. For example, for universal compaction, dynamically changing the value of `ttl` has no impact on periodic compactions. Users should dynamically change `periodic_compaction_seconds` instead. From feature matrix (https://fburl.com/daiquery/5s647hwh), there are instances where users set `ttl` to non-zero value and `periodic_compaction_seconds` to 0. For backward compatibility reason, instead of deprecating `ttl`, comments are added to mention that `periodic_compaction_seconds` are preferred. In `SanitizeOptions()`, we update the value of `periodic_compaction_seconds` to take into account value of `ttl`. The logic is documented in relevant option comment.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11552
Test Plan: * updated existing unit test `DBTestUniversalCompaction2.PeriodicCompactionDefault`
Reviewed By: ajkr
Differential Revision: D47381434
Pulled By: cbi42
fbshipit-source-id: bc41f29f77318bae9a96be84dd89bf5617c7fd57
Summary:
Remove obsolete comment.
Support for WriteBatchWithIndex::NewIteratorWithBase when overwrite_key=false is added in https://github.com/facebook/rocksdb/pull/8135, as you can clearly see in the HISTORY.md.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11636
Reviewed By: jowlyzhang
Differential Revision: D47722955
Pulled By: ajkr
fbshipit-source-id: 4fa44a309d9708e9f4a1530918a9aaf7114c9032
Summary:
... ahead of dynamic variant.
* Introduce an Unref function for a common pattern. Cases that were previously using std::memory_order_acq_rel we doing so because we were saving the pre-updated value in case it might be used. Now we are explicitly throwing away the pre-updated value so do not need the acquire semantic, just release.
* Introduce a reusable EvictionData struct and TrackAndReleaseEvictedEntry() function.
* Based on a linter suggesting, use const Func& parameter type instead of Func for templated callable parameters.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11630
Test Plan: existing tests, and performance test with release build of cache_bench. Getting 1-2% difference between before & after from run to run, but inconsistent about which one is faster.
Reviewed By: jowlyzhang
Differential Revision: D47657334
Pulled By: pdillinger
fbshipit-source-id: 5cf2377c0d47a39143b04be6735f98c550e8bdc3
Summary:
**Context/Summary**
As titled. The benefit of doing so is to explicitly call readahead() instead of relying page cache behavior for compaction read when we know that we most likely need readahead as compaction read is sequential read .
**Test**
Extended the existing UT to cover compaction read case
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11631
Reviewed By: ajkr
Differential Revision: D47681437
Pulled By: hx235
fbshipit-source-id: 78792f64985c4dc44aa8f2a9c41ab3e8bbc0bc90
Summary:
Add `rocksdb_transactiondb_get_base_db` and `rocksdb_transactiondb_close_base_db` functions to the C API modeled after `rocksdb_optimistictransactiondb_get_base_db` and `rocksdb_optimistictransactiondb_close_base_db`:
ca50ccc71a/include/rocksdb/c.h (L2711-L2716)
With this pair of functions, it is possible to get a `rocksdb_t *` from a `rocksdb_transactiondb_t *`. The main goal is to be able to use the approximate memory usage API, only accessible to the `rocksdb_t *` type:
ca50ccc71a/include/rocksdb/c.h (L2821-L2833)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11562
Reviewed By: ajkr
Differential Revision: D47603343
Pulled By: jowlyzhang
fbshipit-source-id: c70cf6af5834026e232fe7791634db3a396f7d5e
Summary:
Add path existence check in the script to avoid script running even when db_bench executable does not exist or relative path is not right.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11621
Reviewed By: jowlyzhang
Differential Revision: D47552590
Pulled By: ajkr
fbshipit-source-id: f09ea069f69e067212b249a22ad755b76bc6063a
Summary:
In [db_impl_open.cc](https://github.com/facebook/rocksdb/blob/main/db/db_impl/db_impl_open.cc), the sync point `SanitizeOptions::AfterChangeMaxOpenFiles` is used to set `max_open_files` with some specified "**invalid**" value even if it has been sanitized.
However, in [db_compaction_test.cc](https://github.com/facebook/rocksdb/blob/main/db/db_compaction_test.cc), `SanitizeOptions::AfterChangeMaxOpenFiles` would not be executed since `SyncPoint::EnableProcessing()` is run after `DBTestBase::Reopen()`. To enable `SanitizeOptions::AfterChangeMaxOpenFiles`, `SyncPoint::EnableProcessing()` should be put ahead of `DBTestBase::Reopen()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11583
Test Plan:
run unit tests locally as below:
```
make J=1 check
[ RUN ] DBCompactionTest.LevelTtlCascadingCompactions
[ OK ] DBCompactionTest.LevelTtlCascadingCompactions (85 ms)
[ RUN ] DBCompactionTest.LevelPeriodicCompaction
[ OK ] DBCompactionTest.LevelPeriodicCompaction (57 ms)
```
Reviewed By: jowlyzhang
Differential Revision: D47311827
Pulled By: ajkr
fbshipit-source-id: 99165e87a8129e404af06fdf9b4c96eca540fd23
Summary:
This adds proper support for using rocksdb with FetchContent, without this PR the user must include the following with their own `CMakeLists.txt` file:
```cmake
include_directories(./build/_deps/rocksdb-src/include)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11575
Reviewed By: jowlyzhang
Differential Revision: D47163520
Pulled By: ajkr
fbshipit-source-id: a202dcf435ecc9dd8d51c88f90e98c04814721ca
Summary:
An internal user wants to implement a key-aware row cache policy. For that, they need to know the components of the cache key, especially the user key component. With a specialized `RowCache` interface, we will be able to tell them the components so they won't have to make assumptions about our internal key schema.
This PR prepares for the specialized `RowCache` interface by updating the migration plan of https://github.com/facebook/rocksdb/issues/11450. I added a release note for the removed APIs and didn't mention the added ones for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11620
Reviewed By: pdillinger
Differential Revision: D47536962
Pulled By: ajkr
fbshipit-source-id: bbee0fc4ad67fc699a66b8f2b4ea4544dd003691
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11624
<queue> must be included to use std::queue.
Reviewed By: pdillinger
Differential Revision: D47562433
fbshipit-source-id: 7c5b19fd9e411694c782dfc0dff0231d4f92ef24
Summary:
... ahead of planned dynamic HCC variant. This changes
simplifies some logic while still enabling future code sharing between
implementation variants.
Detail: For complicated reasons, using a std::function parameter to
`ConstApplyToEntriesRange` with a lambda argument does not play
nice with templated HandleImpl. An explicit conversion to std::function
would be needed for it to compile. Templating the function type is the
easy work-around.
Also made some functions from https://github.com/facebook/rocksdb/issues/11572 private as recommended
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11609
Test Plan: existing tests
Reviewed By: jowlyzhang
Differential Revision: D47407415
Pulled By: pdillinger
fbshipit-source-id: 0f65954db16335999b78fb7d2563ec627624cef0
Summary:
Extend the coverage for option `flush_verify_memtable_count`. The verification code is similar to the ones for regular flush: c3c84b3397/db/flush_job.cc (L956-L965)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11611
Test Plan: existing tests.
Reviewed By: ajkr
Differential Revision: D47478893
Pulled By: cbi42
fbshipit-source-id: ca580c9dbcd6e91facf2e49210661336a79a248e
Summary:
Stacked on https://github.com/facebook/rocksdb/issues/11572
* Minimize use of std::function and lambdas to minimize chances of
compiler heap-allocating closures (unnecessary stress on allocator). It
appears that converting FindSlot to a template enables inlining the
lambda parameters, avoiding heap allocations.
* Clean up some logic with FindSlot (FIXMEs from https://github.com/facebook/rocksdb/issues/11572)
* Fix handling of rare case of probing all slots, with new unit test.
(Previously Insert would not roll back displacements in that case, which
would kill performance if it were to happen.)
* Add an -early_exit option to cache_bench for gathering memory stats
before deallocation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11601
Test Plan:
unit test added for probing all slots
## Seeing heap allocations
Run `MALLOC_CONF="stats_print:true" ./cache_bench -cache_type=hyper_clock_cache`
before https://github.com/facebook/rocksdb/issues/11572 vs. after this change. Before, we see this in the
interesting bin statistics:
```
size nrequests
---- ---------
32 578460
64 24340
8192 578460
```
And after:
```
size nrequests
---- ---------
32 (insignificant)
64 24370
8192 579130
```
## Performance test
Build with `make USE_CLANG=1 PORTABLE=0 DEBUG_LEVEL=0 -j32 cache_bench`
Run `./cache_bench -cache_type=hyper_clock_cache -ops_per_thread=5000000`
in before and after configurations, simultaneously:
```
Before: Complete in 33.244 s; Rough parallel ops/sec = 2406442
After: Complete in 32.773 s; Rough parallel ops/sec = 2441019
```
Reviewed By: jowlyzhang
Differential Revision: D47375092
Pulled By: pdillinger
fbshipit-source-id: 46f0f57257ddb374290a0a38c651764ea60ba410
Summary:
We observed `CompactionOutputs::UpdateGrandparentBoundaryInfo` consumes much time for `InternalKey::DecodeFrom` and `InternalKey::~InternalKey` in flame graph.
This PR omit the InternalKey object in `CompactionOutputs::UpdateGrandparentBoundaryInfo` .
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11610
Reviewed By: ajkr
Differential Revision: D47426971
Pulled By: cbi42
fbshipit-source-id: f0d3a8186d778294515c0685032f5b395c4d6a62
Summary:
Separate out some functionality that will be common to both static and dynamic HCC into BaseClockTable. Table::InsertState and GrowIfNeeded will be used by the dynamic HCC so don't make much sense right now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11572
Test Plan:
existing tests. No functional changes intended.
Performance test in subsequent PR https://github.com/facebook/rocksdb/issues/11601
Reviewed By: jowlyzhang
Differential Revision: D47110496
Pulled By: pdillinger
fbshipit-source-id: 379bd433322a42ea28c0043b41ec24956d21e7aa
Summary:
I got the following error message when an SST file is recorded in MANIFEST but is missing from the db folder.
It's confusing in two ways:
1. The part about file "./074837.ldb" which RocksDB will attempt to open only after ./074837.sst is not found.
2. The last part about "No such file or directory in file ./MANIFEST-074507" sounds like `074837.ldb` is not found in manifest.
```
ldb --hex --db=. get some_key
Failed: Corruption: Corruption: IO error: No such file or directory: While open a file for random read: ./074837.ldb: No such file or directory in file ./MANIFEST-074507
```
Improving the error message a little bit:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11573
Test Plan:
run the same command after this PR
```
Failed: Corruption: Corruption: IO error: No such file or directory: While open a file for random read: ./074837.sst: No such file or directory The file ./MANIFEST-074507 may be corrupted.
```
Reviewed By: ajkr
Differential Revision: D47192056
Pulled By: cbi42
fbshipit-source-id: 06863f376cc4455803cffb2250c41399b4c39467
Summary:
Handle file boundaries `FileMetaData.smallest`, `FileMetaData.largest` for when `persist_user_defined_timestamps` is false:
1) on the manifest write path, the original user-defined timestamps in file boundaries are stripped. This stripping is done during `VersionEdit::Encode` to limit the effect of the stripping to only the persisted version of the file boundaries.
2) on the manifest read path during DB open, a a min timestamp is padded to the file boundaries. Ideally, this padding should happen during `VersionEdit::Decode` so that all in memory file boundaries have a compatible user key format as the running user comparator. However, because the user-defined timestamp size information is not available at that time. This change is added to `VersionEditHandler::OnNonCfOperation`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11578
Test Plan:
```
make all check
./version_edit_test --gtest_filter="*EncodeDecodeNewFile4HandleFileBoundary*".
./db_with_timestamp_basic_test --gtest_filter="*HandleFileBoundariesTest*"
```
Reviewed By: pdillinger
Differential Revision: D47309399
Pulled By: jowlyzhang
fbshipit-source-id: 21b4d54d2089a62826b31d779094a39cb2bbbd51
Summary:
Thanks pdillinger for pointing out this test hole. The test `DBWALTestWithTimestamp.Recover` that is intended to test recovery from WAL including user-defined timestamps doesn't achieve its promised coverage. Specifically, after https://github.com/facebook/rocksdb/issues/11557, timestamps will be removed during flush, and RocksDB by default flush memtables during recovery with `avoid_flush_during_recovery` defaults to false. This test didn't fail even if all the timestamps are quickly lost due to the default flush behavior.
This PR renamed test `Recover` to `RecoverAndNoFlush`, and updated it to verify timestamps are successfully recovered from WAL with some time-travel reads. `avoid_flush_during_recovery` is set to true to help do this verification.
On the other hand, for test `DBWALTestWithTimestamp.RecoverAndFlush`, since flush on reopen is DB's default behavior. Setting the flags `max_write_buffer` and `arena_block_size` are not really the factors that enforces the flush, so these flags are removed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11577
Test Plan: ./db_wal_test
Reviewed By: pdillinger
Differential Revision: D47142892
Pulled By: jowlyzhang
fbshipit-source-id: 9465e278806faa5885b541b4e32d99e698edef7d
Summary:
https://github.com/facebook/rocksdb/issues/11542 added a parameter to the C API `rocksdb_options_add_compact_on_deletion_collector_factory` which causes some internal builds to fail. External users using this API would also require code change. Making the API backward compatible by restoring the old C API and add the parameter to a new C API `rocksdb_options_add_compact_on_deletion_collector_factory_del_ratio`.
Also updated change log for 8.4 and will backport this change to 8.4 branch once landed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11593
Test Plan: `make c_test && ./c_test`
Reviewed By: akankshamahajan15
Differential Revision: D47299555
Pulled By: cbi42
fbshipit-source-id: 517dc093ef4cf02cac2fe4af4f1af13754bbda63
Summary:
both options `ttl` and `periodic_compaction_seconds` have the same meaning for FIFO compaction, which is redundant and can be confusing to use. For example, setting TTL to 0 does not disable TTL: user needs to also set periodic_compaction_seconds to 0. Another example is that dynamically setting `periodic_compaction_seconds` (surprisingly) has no effect on TTL compaction. This is because FIFO compaction picker internally only looks at value of `ttl`. The value of `ttl` is in `SanitizeOptions()` which take into account the value of `periodic_compaction_seconds`, but dynamically setting an option does not invoke this method.
This PR clarifies the usage of both options for FIFO compaction: only `ttl` should be used, `periodic_compaction_seconds` will not have any effect on FIFO compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11550
Test Plan:
- updated existing unit test `DBOptionsTest.SanitizeFIFOPeriodicCompaction`
- checked existing values of both options in feature matrix: https://fburl.com/daiquery/xxd0gs9w. All current uses cases either have `periodic_compaction_seconds = 0` or have `periodic_compaction_seconds > ttl`, so should not cause change of behavior.
Reviewed By: ajkr
Differential Revision: D46902959
Pulled By: cbi42
fbshipit-source-id: a9ede235b276783b4906aaec443551fa62ceff4c
Summary:
`sst_dump --command=verify` did not set read_options.verify_checksum to true so it was not verifying checksum.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11576
Test Plan:
ran the same command on an SST file with bad checksum:
```
sst_dump --command=verify --file=...sst_file_with_bad_block_checksum
Before this PR:
options.env is 0x6ba048
Process ...sst_file_with_bad_block_checksum
Sst file format: block-based
The file is ok
After this PR:
options.env is 0x7f43f6690000
Process ...sst_file_with_bad_block_checksum
Sst file format: block-based
... is corrupted: Corruption: block checksum mismatch: stored = 2170109798, computed = 2170097510, type = 4 ...
```
Reviewed By: ajkr
Differential Revision: D47136284
Pulled By: cbi42
fbshipit-source-id: 07d68db715c00347145e5b83d649aef2c3f2acd9
Summary:
This should be a benign bug caused by a long lived typo, this PR fix this issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11398
Reviewed By: ajkr
Differential Revision: D47163379
Pulled By: cbi42
fbshipit-source-id: 531728cae496fd7ac1371bbbd64fc103c3a90dcf
Summary:
Logically strip the user-defined timestamp when L0 files are created during flush when `AdvancedColumnFamilyOptions.persist_user_defined_timestamps` is false. Logically stripping timestamp here means replacing the original user-defined timestamp with a mininum timestamp, which for now is hard coded to be all zeros bytes.
While working on this, I caught a missing piece on the `BlockBuilder` level for this feature. The current quick path `std::min(buffer_size, last_key_size)` needs a bit tweaking to work for this feature. When user-defined timestamp is stripped during block building, on writing first entry or right after resetting, `buffer` is empty and `buffer_size` is zero as usual. However, in follow-up writes, depending on the size of the stripped user-defined timestamp, and the size of the value, what's in `buffer` can sometimes be smaller than `last_key_size`, leading `std::min(buffer_size, last_key_size)` to truncate the `last_key`. Previous test doesn't caught the bug because in those tests, the size of the stripped user-defined timestamps bytes is smaller than the length of the value. In order to avoid the conditional operation, this PR changed the original trivial `std::min` operation into an arithmetic operation. Since this is a change in a hot and performance critical path, I did the following benchmark to check no observable regression is introduced.
```TEST_TMPDIR=/dev/shm/rocksdb1 ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=50000000```
Compiled with DEBUG_LEVEL=0
Test vs. control runs simulaneous for better accuracy, units = ops/sec
PR vs base:
Round 1: 350652 vs 349055
Round 2: 365733 vs 364308
Round 3: 355681 vs 354475
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11557
Test Plan:
New timestamp specific test added or existing tests augmented, both are parameterized with `UserDefinedTimestampTestMode`:
`UserDefinedTimestampTestMode::kNormal` -> UDT feature enabled, write / read with min timestamp
`UserDefinedTimestampTestMode::kStripUserDefinedTimestamps` -> UDT feature enabled, write / read with min timestamp, set Options.persist_user_defined_timestamps to false.
```
make all check
./db_wal_test --gtest_filter="*WithTimestamp*"
./flush_job_test --gtest_filter="*WithTimestamp*"
./repair_test --gtest_filter="*WithTimestamp*"
./block_based_table_reader_test
```
Reviewed By: pdillinger
Differential Revision: D47027664
Pulled By: jowlyzhang
fbshipit-source-id: e729193b6334dfc63aaa736d684d907a022571f5
Summary:
Expose the remaining fields of PlainTableOptions as arguments to `rocksdb_options_set_plain_table_factory` in the C API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11442
Reviewed By: ajkr
Differential Revision: D46786962
Pulled By: hx235
fbshipit-source-id: 8862083dde332bfecc5ff02f9375776ad35c11f5
Summary:
Add `skip_tmpdir_check` argument in crash script. If `tmp_dir` is on remote storage and exist, `isdir` will be false (checking on local storage) leading to exit. By passing `skip_tmpdir_check` with `crashtest.py`, the dir check can be skipped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11539
Test Plan: Ran locally
Reviewed By: anand1976
Differential Revision: D46740456
Pulled By: akankshamahajan15
fbshipit-source-id: 8726882ef53d2c84b604c7515e84eda6d1bf797c
Summary:
I made some changes to add OpenBSD support.
Second time doing something like this, so I apologize in advance if I'm doing something wrong (had some minor hiccups with how github worked).
Fixes https://github.com/facebook/rocksdb/issues/11220
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11255
Reviewed By: akankshamahajan15
Differential Revision: D46361706
Pulled By: ajkr
fbshipit-source-id: 90922fa30197fe6d6f3c0e3ecca2dbb92c337277
Summary:
There are some comments on subclasses in EncryptedEnv module which are duplicate to their parent classes, it would be nice to remove the duplication and keep the consistency if the comments on parent classes updated in someday.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11549
Reviewed By: akankshamahajan15
Differential Revision: D47007061
Pulled By: ajkr
fbshipit-source-id: 8bfdaf9f2418a24ca951c30bb88e90ac861d9016
Summary:
Infer detected a(n) [Unnecessary Copy Intermediate](https://fbinfer.com/docs/next/all-issue-types#unnecessary copy intermediate) issue. variable &my_secondary_handles is copied unnecessarily into an intermediate on line 268. To avoid the copy, try moving it by calling std::move instead or alternatively change the callee's parameter type to const &.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11566
Reviewed By: akankshamahajan15
Differential Revision: D47057361
Pulled By: ajkr
fbshipit-source-id: bc5d7a71638aecbf976f1a163128b489c9e87fd8
Summary:
When num_file_reads_for_auto_readahead = 1, during seek, it would go for prefetchingextra data in second buffer along with seek data, that would lead to increase in read data and
discarded bytes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11560
Test Plan: Added unit test
Reviewed By: anand1976
Differential Revision: D47008102
Pulled By: akankshamahajan15
fbshipit-source-id: 566c6131cb5f968d5efb81fd0ab233ff7e534ab0
Summary:
https://github.com/facebook/rocksdb/issues/11378 added a new overloaded `CreateColumnFamilyWithImport` API and updated the virtual function in `StackableDB` and `DBImplReadOnly` to the newly overloaded one. This caused internal error when there is a derived class that tries to override the original `CreateColumnFamilyWithImport` function. This PR adds the original `CreateColumnFamilyWithImport` function back to `StackableDB` and `DBImplReadOnly`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/11556
Test Plan: check if this fixes an internal build
Reviewed By: akankshamahajan15
Differential Revision: D46980506
Pulled By: cbi42
fbshipit-source-id: 975a6c5748bf9481499a62ee5997ca59e542e3bc
Peter Dillinger