Summary:
production code under utilities/cassandra depends on gtest.h. Remove them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6908
Test Plan: Run all existing tests.
Reviewed By: ajkr
Differential Revision: D21842606
fbshipit-source-id: a098e0b49c9aeac51cc90a79562ad9897a36122c
Summary:
* Add missing unit test for schema stability of FileChecksumGenCrc32c
(previously was only comparing to itself)
* A lot of clarifying comments
* Add some assertions for preconditions
* Rename WritableFileWriter::CalculateFileChecksum -> UpdateFileChecksum
* Simplify FileChecksumGenCrc32c with shared functions
* Implement EndianSwapValue to replace unused EndianTransform
And incidentally since I had trouble with 'make check-format' GitHub action disagreeing with local run,
* Output full diagnostic information when 'make check-format' fails in CI
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6861
Test Plan: new unit test passes before & after other changes
Reviewed By: zhichao-cao
Differential Revision: D21667115
Pulled By: pdillinger
fbshipit-source-id: 6a99970f87605aa024fa540c78cd519ff322c3e6
Summary:
In level compaction, if the total size (even if compensated after taking account of the deletions) of a level hasn't exceeded the limit, but there are lots of deletion entries in some SST files of the level, these files should also be good candidates for compaction. Otherwise, queries for the deleted keys might be slow because they need to go over all the tombstones.
This PR adds an option `deletion_ratio` to the factory of `CompactOnDeletionCollector` to configure it to trigger compaction when the ratio of tombstones >= `deletion_ratio`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6806
Test Plan:
Added new unit test in `compact_on_deletion_collector_test.cc`.
make compact_on_deletion_collector_test && ./compact_on_deletion_collector_test
Reviewed By: ajkr
Differential Revision: D21511981
Pulled By: cheng-chang
fbshipit-source-id: 65a9d0150e8c9c00337787686475252e4535a3e1
Summary:
https://github.com/facebook/rocksdb/pull/6807 extends the logic that
identifies and purges obsolete files to blob files handled by RocksDB
itself. In order to prevent that from interfering with the current BlobDB code,
we need to make sure that `BlobDBOptions::blob_dir` is different from
the storage directories used by the base DB. (Note: this is true by default.)
The patch adds a check that explicitly disallows this configuration and
returns `Status::NotSupported` from `BlobDB::Open` in such cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6810
Test Plan: Tested using the BlobDB mode of `db_bench`.
Reviewed By: riversand963
Differential Revision: D21412676
Pulled By: ltamasi
fbshipit-source-id: 6630cc7481e48c8bf55d59423b25f14d52ffe681
Summary:
When expiration is set in a pessimistic transaction, `txn_state_` is already updated to `AWAITING_PREPARE` in the `if (expiration_time_ > 0)` block, there is no need to update the state in `if (can_prepare)` block again.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6778
Test Plan: make check
Reviewed By: lth
Differential Revision: D21335319
Pulled By: cheng-chang
fbshipit-source-id: 251d634cc7d1a0e86e673a59f0bda8584da5a35f
Summary:
In current commit protocol of pessimistic transaction, if the transaction is not prepared before commit, the commit protocol implicitly assumes that the user wants to commit without prepare.
This PR adds TransactionOptions::skip_prepare, the default value is `true` because if set to `false`, all existing users who commit without prepare need to update their code to set skip_prepare to true. Although this does not force the user to explicitly express their intention of skip_prepare, it at least lets the user be aware of the assumption of being able to commit without prepare.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6775
Test Plan: added a new unit test TransactionTest::CommitWithoutPrepare
Reviewed By: lth
Differential Revision: D21313270
Pulled By: cheng-chang
fbshipit-source-id: 3d95b7c9b2d6cdddc09bdd66c561bc4fae8c3251
Summary:
Calculate ```IOOptions::timeout``` using ```ReadOptions::deadline``` and pass it to ```FileSystem::Read/FileSystem::MultiRead```. This allows us to impose a tighter bound on the time taken by Get/MultiGet on FileSystem/Envs that support IO timeouts. Even on those that don't support, check in ```RandomAccessFileReader::Read``` and ```MultiRead``` and return ```Status::TimedOut()``` if the deadline is exceeded.
For now, TableReader creation, which might do file opens and reads, are not covered. It will be implemented in another PR.
Tests:
Update existing unit tests to verify the correct timeout value is being passed
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6751
Reviewed By: riversand963
Differential Revision: D21285631
Pulled By: anand1976
fbshipit-source-id: d89af843e5a91ece866e87aa29438b52a65a8567
Summary:
The dynamic_cast in the filter benchmark causes release mode to fail due to
no-rtti. Replace with static_cast_with_check.
Signed-off-by: Derrick Pallas <derrick@pallas.us>
Addition by peterd: Remove unnecessary 2nd template arg on all static_cast_with_check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6732
Reviewed By: ltamasi
Differential Revision: D21304260
Pulled By: pdillinger
fbshipit-source-id: 6e8eb437c4ca5a16dbbfa4053d67c4ad55f1608c
Summary:
If an error happens during BlobDBImpl::Open after the base DB has been
opened, we need to destroy the `ColumnFamilyHandle`s returned by `DB::Open`
to prevent an assertion in `ColumnFamilySet`'s destructor from being hit.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6763
Test Plan: Ran `make check` and tested using the BlobDB mode of `db_bench`.
Reviewed By: riversand963
Differential Revision: D21262643
Pulled By: ltamasi
fbshipit-source-id: 60ebc7ab19be66cf37fbe5f6d8957d58470f3d3b
Summary:
The methods in convenience.h are used to compare/convert objects to/from strings. There is a mishmash of parameters in use here with more needed in the future. This PR replaces those parameters with a single structure.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6389
Reviewed By: siying
Differential Revision: D21163707
Pulled By: zhichao-cao
fbshipit-source-id: f807b4cc7e2b0af3871536b69546b2604dfa81bd
Summary:
Based on https://github.com/facebook/rocksdb/issues/6648 (CLA Signed), but heavily modified / extended:
* Implicit capture of this via [=] deprecated in C++20, and [=,this] not standard before C++20 -> now using explicit capture lists
* Implicit copy operator deprecated in gcc 9 -> add explicit '= default' definition
* std::random_shuffle deprecated in C++17 and removed in C++20 -> migrated to a replacement in RocksDB random.h API
* Add the ability to build with different std version though -DCMAKE_CXX_STANDARD=11/14/17/20 on the cmake command line
* Minimal rebuild flag of MSVC is deprecated and is forbidden with /std:c++latest (C++20)
* Added MSVC 2019 C++11 & MSVC 2019 C++20 in AppVeyor
* Added GCC 9 C++11 & GCC9 C++20 in Travis
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6697
Test Plan: make check and CI
Reviewed By: cheng-chang
Differential Revision: D21020318
Pulled By: pdillinger
fbshipit-source-id: 12311be5dbd8675a0e2c817f7ec50fa11c18ab91
Summary:
Log it in the info log to help in troubleshooting. It is logged as follows -
```
2020/04/10-10:51:39.886662 7ffff7fef340 Options.table_properties_collectors: CompactOnDeletionCollector (Sliding window size = 100 Deletion trigger = 90);
```
Tests:
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6686
Reviewed By: ltamasi
Differential Revision: D21002442
Pulled By: anand1976
fbshipit-source-id: 7adf0dbae7f1febcb00ce61fea5097118ede5c6a
Summary:
Although there are tests related to locking in transaction_test, this new test directly tests against TransactionLockMgr.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6599
Test Plan: make transaction_lock_mgr_test && ./transaction_lock_mgr_test
Reviewed By: lth
Differential Revision: D20673749
Pulled By: cheng-chang
fbshipit-source-id: 1fa4a13218e68d785f5a99924556751a8c5c0f31
Summary:
When creating a database backup, the background threads will not only consume IO resources by copying files, but also consuming CPU such as by computing checksums. During peak times, the CPU consumption by the background threads might affect online queries.
This PR makes it possible to decrease CPU priority of these threads when creating a new backup.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6602
Test Plan: make check
Reviewed By: siying, zhichao-cao
Differential Revision: D20683216
Pulled By: cheng-chang
fbshipit-source-id: 9978b9ed9488e8ce135e90ca083e5b4b7221fd84
Summary:
1. If expiration_time is non-positive, no need to call NowMicros, save a syscall.
2. expire_time should only be set when expired is false.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6586
Test Plan: make check
Reviewed By: lth
Differential Revision: D20673730
Pulled By: cheng-chang
fbshipit-source-id: a69e8d7b16dc6d0d00487bb1c19f0710d79482e2
Summary:
The last key may hit index of out bound exception when id = 9.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6574
Reviewed By: riversand963
Differential Revision: D20699791
Pulled By: cheng-chang
fbshipit-source-id: 8e2c5be5ff0e53e9857cfd59cea97cff21446819
Summary:
This test was written like a stress test, using up to 3x26GB
RSS memory during parallel 'make check'. Now, while this code is mostly
dormant, I've made the "for Travis" versions of the expensive tests the
canonical versions and disabled the expensive versions. This has the
side benefit of removing some arbitrary conditional compilation.
For unknown reason, the super expensive tests were gated on
Snappy_Supported, which appears to be irrelevant, so I removed it.
The tests can be fixed / improved / migrated to stress test if/when they
are deemed important again.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6601
Test Plan:
make check + CI
./persistent_cache_test Before:
...
[==========] 10 tests from 2 test cases ran. (114541 ms total)
[ PASSED ] 10 tests.
YOU HAVE 1 DISABLED TEST
After:
...
[==========] 3 tests from 2 test cases ran. (1714 ms total)
[ PASSED ] 3 tests.
YOU HAVE 10 DISABLED TESTS
Reviewed By: siying
Differential Revision: D20680983
Pulled By: pdillinger
fbshipit-source-id: 2be0fde13eeb0a71110ac7f5477cfe63996a509e
Summary:
As the first step of reintroducing eviction statistics for the block
cache, the patch switches from using simple function pointers as deleters
to function objects implementing an interface. This will enable using
deleters that have state, like a smart pointer to the statistics object
that is to be updated when an entry is removed from the cache. For now,
the patch adds a deleter template class `SimpleDeleter`, which simply
casts the `value` pointer to its original type and calls `delete` or
`delete[]` on it as appropriate. Note: to prevent object lifecycle
issues, deleters must outlive the cache entries referring to them;
`SimpleDeleter` ensures this by using the ("leaky") Meyers singleton
pattern.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6545
Test Plan: `make asan_check`
Reviewed By: siying
Differential Revision: D20475823
Pulled By: ltamasi
fbshipit-source-id: fe354c33dd96d9bafc094605462352305449a22a
Summary:
Add timestamp support for MultiGet().
timestamp from readoptions is honored, and timestamps can be returned along with values.
MultiReadRandom perf test (10 minutes) on the same development machine ram drive with the same DB data shows no regression (within marge of error). The test is adapted from https://github.com/facebook/rocksdb/wiki/RocksDB-In-Memory-Workload-Performance-Benchmarks.
base line (commit 17bef7d3a):
multireadrandom : 104.173 micros/op 307167 ops/sec; (5462999 of 5462999 found)
This PR:
multireadrandom : 104.199 micros/op 307095 ops/sec; (5307999 of 5307999 found)
.\db_bench --db=r:\rocksdb.github --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --cache_size=2147483648 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=134217728 --max_bytes_for_level_base=1073741824 --disable_wal=0 --wal_dir=r:\rocksdb.github\WAL_LOG --sync=0 --verify_checksum=1 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --duration=600 --benchmarks=multireadrandom --use_existing_db=1 --num=25000000 --threads=32 --allow_concurrent_memtable_write=0
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6483
Reviewed By: anand1976
Differential Revision: D20498373
Pulled By: riversand963
fbshipit-source-id: 8505f22bc40fd791bc7dd05e48d7e67c91edb627
Summary:
By supporting direct IO in RandomAccessFileReader::MultiRead, the benefits of parallel IO (IO uring) and direct IO can be combined.
In direct IO mode, read requests are aligned and merged together before being issued to RandomAccessFile::MultiRead, so blocks in the original requests might share the same underlying buffer, the shared buffers are returned in `aligned_bufs`, which is a new parameter of the `MultiRead` API.
For example, suppose alignment requirement for direct IO is 4KB, one request is (offset: 1KB, len: 1KB), another request is (offset: 3KB, len: 1KB), then since they all belong to page (offset: 0, len: 4KB), `MultiRead` only reads the page with direct IO into a buffer on heap, and returns 2 Slices referencing regions in that same buffer. See `random_access_file_reader_test.cc` for more examples.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6446
Test Plan: Added a new test `random_access_file_reader_test.cc`.
Reviewed By: anand1976
Differential Revision: D20097518
Pulled By: cheng-chang
fbshipit-source-id: ca48a8faf9c3af146465c102ef6b266a363e78d1
Summary:
Add sequence_number_ptr to the checkpoint interface to expose the sequence number during taking the checkpoint. The number will be consistent with the seq # in rocksdb log.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5528
Test Plan: make check -j64
Reviewed By: Winger1994
Differential Revision: D16080209
fbshipit-source-id: 6dc3c7680287ee97d673c5e61f89aae1f43e33df
Summary:
Preliminary support for iterator with user timestamp. Current implementation does not consider merge operator and reverse iterator. Auto compaction is also disabled in unit tests.
Create an iterator with timestamp.
```
...
read_opts.timestamp = &ts;
auto* iter = db->NewIterator(read_opts);
// target is key without timestamp.
for (iter->Seek(target); iter->Valid(); iter->Next()) {}
for (iter->SeekToFirst(); iter->Valid(); iter->Next()) {}
delete iter;
read_opts.timestamp = &ts1;
// lower_bound and upper_bound are without timestamp.
read_opts.iterate_lower_bound = &lower_bound;
read_opts.iterate_upper_bound = &upper_bound;
auto* iter1 = db->NewIterator(read_opts);
// Do Seek or SeekToFirst()
delete iter1;
```
Test plan (dev server)
```
$make check
```
Simple benchmarking (dev server)
1. The overhead introduced by this PR even when timestamp is disabled.
key size: 16 bytes
value size: 100 bytes
Entries: 1000000
Data reside in main memory, and try to stress iterator.
Repeated three times on master and this PR.
- Seek without next
```
./db_bench -db=/dev/shm/rocksdbtest-1000 -benchmarks=fillseq,seekrandom -enable_pipelined_write=false -disable_wal=true -format_version=3
```
master: 159047.0 ops/sec
this PR: 158922.3 ops/sec (2% drop in throughput)
- Seek and next 10 times
```
./db_bench -db=/dev/shm/rocksdbtest-1000 -benchmarks=fillseq,seekrandom -enable_pipelined_write=false -disable_wal=true -format_version=3 -seek_nexts=10
```
master: 109539.3 ops/sec
this PR: 107519.7 ops/sec (2% drop in throughput)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6255
Differential Revision: D19438227
Pulled By: riversand963
fbshipit-source-id: b66b4979486f8474619f4aa6bdd88598870b0746
Summary:
In direct IO mode, RandomAccessFileReader::Read allocates an internal aligned buffer, and then copies the result into the scratch buffer. If the result is only temporarily used inside a function, there is no need to do the memcpy and just let the result Slice refer to the internally allocated buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6455
Test Plan: make check
Differential Revision: D20106753
Pulled By: cheng-chang
fbshipit-source-id: 44f505843837bba47a56e3fa2c4dd3bd76486b58
Summary:
In most places in the code the variable names are spelled correctly as
COMMITTED but in a couple places not. This fixes them and ensures the
variable is always called COMMITTED everywhere.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6481
Differential Revision: D20306776
Pulled By: pdillinger
fbshipit-source-id: b6c1bfe41db559b4bc6955c530934460c07f7022
Summary:
Added new Get() methods that return timestamp. Dummy implementation is given so that classes derived from DB don't need to be touched to provide their implementation. MultiGet is not included.
ReadRandom perf test (10 minutes) on the same development machine ram drive with the same DB data shows no regression (within marge of error). The test is adapted from https://github.com/facebook/rocksdb/wiki/RocksDB-In-Memory-Workload-Performance-Benchmarks.
base line (commit 72ee067b9):
101.712 micros/op 314602 ops/sec; 36.0 MB/s (5658999 of 5658999 found)
This PR:
100.288 micros/op 319071 ops/sec; 36.5 MB/s (5674999 of 5674999 found)
./db_bench --db=r:\rocksdb.github --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --cache_size=2147483648 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=134217728 --max_bytes_for_level_base=1073741824 --disable_wal=0 --wal_dir=r:\rocksdb.github\WAL_LOG --sync=0 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --duration=600 --benchmarks=readrandom --use_existing_db=1 --num=25000000 --threads=32
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6409
Differential Revision: D20200086
Pulled By: riversand963
fbshipit-source-id: 490edd74d924f62bd8ae9c29c2a6bbbb8410ca50
Summary:
Today `WriteUnpreparedTxn::RollbackInternal` will write the rollback batch assuming that there is only a single subbatch. However, because untracked_keys_ are currently not deduplicated, it's possible for duplicate keys to exist, and thus split the batch. Also, tracked_keys_ also does not support compators outside of the bytewise comparators, so it's possible for duplicates to occur there as well.
To solve this, just pass in the correct subbatch count.
Also, removed `WriteUnpreparedRollbackPreReleaseCallback` to unify the Commit/Rollback codepaths some more.
Also, fixed a bug in `CommitInternal` where if 1. two_write_queue is true and 2. include_data is true, then `WriteUnpreparedCommitEntryPreReleaseCallback` ends up calling `AddCommitted` on the commit time write batch a second time on the second write. To fix, `WriteUnpreparedCommitEntryPreReleaseCallback` is re-initialized.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6463
Differential Revision: D20150153
Pulled By: lth
fbshipit-source-id: df0b42d39406c75af73df995aa1138f0db539cd1
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
For write unprepared, some applications may bypass the transaction api, and write keys directly into the write batch. However, since they are not tracked, rollbacks (both for savepoint and transaction) are not aware that these keys have to be rolled back.
The fix is to track them in `WriteUnpreparedTxn::untracked_keys_`. This is populated whenever we flush unprepared batches into the DB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6404
Differential Revision: D19842023
Pulled By: lth
fbshipit-source-id: a9edfc643d5c905fc89da9a9a9094d30c9b70108
Summary:
I create a new branch from the branch new upsteram/master and "git merge --squash".
Maybe it will fix everything.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6420
Differential Revision: D19897152
Pulled By: zhichao-cao
fbshipit-source-id: 6575d9e3b23e360f42ee1480b43028b5fcc20136
Summary:
Unfortunately, it seems like mysqld reuses xids across machine restarts. When that happens, we could have something like the following happening:
```
BEGIN_PREPARE(unprepared) Put(a) END_PREPARE(xid = 1)
-- crash and recover with Put(a) rolled back as it was not prepared
BEGIN_PREPARE(prepared) Put(b) END_PREPARE(xid = 1)
COMMIT(xid = 1)
-- crash and recover with both a, b
```
To solve this, we will have to log the rollback batch into the WAL during recovery.
WritePrepared already logs the rollback batch into the WAL, if a rollback happens after prepare, so there is no problem there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6418
Differential Revision: D19896151
Pulled By: lth
fbshipit-source-id: 2ff65ddc5fe75efd57736fed4b7cd7a109d26609
Summary:
A recent fix related to 2pc https://github.com/facebook/rocksdb/pull/6313/ writes something to WAL, but does not flush or sync. This causes assertion failure "impl->TEST_WALBufferIsEmpty()" if manual_wal_flush = true. We should fsync the entry to make sure a second power reset can recover.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6417
Test Plan: Add manual_wal_flush=true case in TransactionTest.DoubleCrashInRecovery and fix a bug in the test so that the bug can be reproduced. It passes with the fix.
Differential Revision: D19894537
fbshipit-source-id: f1e84e49e2269f583c6019743118292cd8b6598e
Summary:
to adapt the change in ceph upstream where the bufferlist::copy() method
was removed in
c724369010
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6395
Differential Revision: D19816815
Pulled By: zhichao-cao
fbshipit-source-id: 9210767b91af0ecdcf5dfaa3e70edcaeea55135f
Summary:
Right, when reading from option files, no readahead is used and 8KB buffer is used. It might introduce high latency if the file system provide high latency and doesn't do readahead. Instead, introduce a readahead to the file. When calling inside DB, infer the value from options.log_readahead. Otherwise, a default 512KB readahead size is used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6372
Test Plan: Add --log_readahead_size in db_bench. Run it with several options and observe read size from option files using strace.
Differential Revision: D19727739
fbshipit-source-id: e6d8053b0a64259abc087f1f388b9cd66fa8a583
Summary:
BlobDB keeps track of the mapping between SSTs and blob files using
the `OnFlushCompleted` and `OnCompactionCompleted` callbacks of
the `EventListener` interface: upon receiving a flush notification, a link
is added between the newly flushed SST and the corresponding blob file;
for compactions, links are removed for the inputs and added for the outputs.
The earlier code performed this link deletion and addition even for
trivially moved files; the new code walks through the two lists together
(in a fashion that's similar to merge sort) and skips such files.
This should mitigate https://github.com/facebook/rocksdb/issues/6338,
wherein an assertion is triggered with the earlier code when a compaction
notification for a trivial move precedes the flush notification for the
moved SST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6381
Test Plan: make check
Differential Revision: D19773729
Pulled By: ltamasi
fbshipit-source-id: ae0f273ded061110dd9334e8fb99b0d7786650b0
Summary:
Unit test names, together with other components, are used to create log files
during some internal testing. Overly long names cause infra failure due to file
names being too long.
Look for internal tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6352
Differential Revision: D19649307
Pulled By: riversand963
fbshipit-source-id: 6f29de096e33c0eaa87d9c8702f810eda50059e7
Summary:
The patch adds statistics support to the new BlobDB garbage collection implementation;
namely, it adds support for the following (pre-existing) tickers:
`BLOB_DB_GC_NUM_FILES`: the number of blob files obsoleted by the GC logic.
`BLOB_DB_GC_NUM_NEW_FILES`: the number of new blob files generated by the GC logic.
`BLOB_DB_GC_FAILURES`: the number of failed GC passes (where a GC pass is
equivalent to a (sub)compaction).
`BLOB_DB_GC_NUM_KEYS_RELOCATED`: the number of blobs relocated to new blob
files by the GC logic.
`BLOB_DB_GC_BYTES_RELOCATED`: the total size of blobs relocated to new blob files.
The tickers `BLOB_DB_GC_NUM_KEYS_OVERWRITTEN`, `BLOB_DB_GC_NUM_KEYS_EXPIRED`,
`BLOB_DB_GC_BYTES_OVERWRITTEN`, `BLOB_DB_GC_BYTES_EXPIRED`, and
`BLOB_DB_GC_MICROS` are not relevant for the new GC logic, and are thus marked
deprecated.
The patch also adds a couple of log messages that log the number and total size of
blobs encountered and relocated during a GC pass, as well as the number of blob
files created and obsoleted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6296
Test Plan: Extended unit tests and used the BlobDB mode of `db_bench`.
Differential Revision: D19402513
Pulled By: ltamasi
fbshipit-source-id: d53d2bfbf4928a1db1e9346c67ebb9007b8932ec
Summary:
In WritePrepared there could be gap in sequence numbers. This breaks the trick we use in kPointInTimeRecovery which assume the first seq in the log right after the corrupted log is one larger than the last seq we read from the logs. To let this trick keep working, we add a dummy entry with the expected sequence to the first log right after recovery.
Also in WriteCommitted, if the log right after the corrupted log is empty, since it has no sequence number to let the sequential trick work, it is assumed as unexpected behavior. This is however expected to happen if we close the db after recovering from a corruption and before writing anything new to it. To remedy that, we apply the same technique by writing a dummy entry to the log that is created after the corrupted log.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6313
Differential Revision: D19458291
Pulled By: maysamyabandeh
fbshipit-source-id: 09bc49e574690085df45b034ca863ff315937e2d
Summary:
This is a simple edit to have two #include file paths be consistent within range_del_aggregator.{h,cc} with everywhere else.
The impact of this inconsistency is that it actual breaks a Bazel based build on the Windows platform. The same pragma once failure occurs with both Windows Visual C++ 2019 and clang for Windows 9.0. Bazel's "sandboxing" of the builds causes both compilers to not properly recognize "rocksdb/types.h" and "include/rocksdb/types.h" to be the same file (also comparator.h). My guess is that the backslash versus forward slash mixing within path names is the underlying issue.
But, everything builds fine once the include paths in these two source files are consistent with the rest of the repository.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6321
Differential Revision: D19506585
Pulled By: ltamasi
fbshipit-source-id: 294c346607edc433ab99eaabc9c880ee7426817a
Summary:
In addition to removing the earlier partially implemented garbage collection
logic from the BlobDB codebase, the patch also removes the test cases (as well as
the related sync points, as appropriate) that were only relevant for the old
implementation, and reworks the remaining ones so they use the new GC logic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6278
Test Plan: `make check`
Differential Revision: D19335226
Pulled By: ltamasi
fbshipit-source-id: 0cc1794bc9892feda1426ed5522a318f3cb1b692
Summary:
unordered_write is incompatible with non-zero max_successive_merges. Although we check this at runtime, we currently don't prevent the user from setting this combination in options. This has led to stress tests to fail with this combination is tried in ::SetOptions.
The patch fixes that and also reverts the changes performed by https://github.com/facebook/rocksdb/pull/6254, in which max_successive_merges was mistakenly declared incompatible with unordered_write.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6284
Differential Revision: D19356115
Pulled By: maysamyabandeh
fbshipit-source-id: f06dadec777622bd75f267361c022735cf8cecb6
Summary:
Some shadow warning shows up when using gcc 4.8. An example:
./utilities/blob_db/blob_compaction_filter.h: In constructor ‘rocksdb::blob_db::BlobIndexCompactionFilterFactoryBase::BlobIndexCompactionFilterFactoryBase(rocksdb::blob_db::lobDBImpl*, rocksdb::Env*, rocksdb::Statistics*)’:
./utilities/blob_db/blob_compaction_filter.h:121:7: error: declaration of ‘blob_db_impl’ shadows a member of 'this' [-Werror=shadow]
: blob_db_impl_(blob_db_impl), env_(_env), statistics_(_statistics) {}
^
Fix them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6242
Test Plan: Build and see the warnings go away.
Differential Revision: D19217789
fbshipit-source-id: 8ef631941f23dab47a388e060adec24b72efd65e
sdong