Summary:
Enhancement to MultiGet batching to read data blocks required for keys in a batch in parallel from disk. It uses Env::MultiRead() API to read multiple blocks and reduce latency.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5464
Test Plan:
1. make check
2. make asan_check
3. make asan_crash
Differential Revision: D15911771
Pulled By: anand1976
fbshipit-source-id: 605036b9af0f90ca0020dc87c3a86b4da6e83394
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
Summary:
This PR adds more callers for table readers. These information are only used for block cache analysis so that we can know which caller accesses a block.
1. It renames the BlockCacheLookupCaller to TableReaderCaller as passing the caller from upstream requires changes to table_reader.h and TableReaderCaller is a more appropriate name.
2. It adds more table reader callers in table/table_reader_caller.h, e.g., kCompactionRefill, kExternalSSTIngestion, and kBuildTable.
This PR is long as it requires modification of interfaces in table_reader.h, e.g., NewIterator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5454
Test Plan: make clean && COMPILE_WITH_ASAN=1 make check -j32.
Differential Revision: D15819451
Pulled By: HaoyuHuang
fbshipit-source-id: b6caa704c8fb96ddd15b9a934b7e7ea87f88092d
Summary:
Currently the read-ahead logic for user reads and compaction reads go through different code paths where compaction reads create new table readers and use `ReadaheadRandomAccessFile`. This change is to unify read-ahead logic to use read-ahead in BlockBasedTableReader::InitDataBlock(). As a result of the change `ReadAheadRandomAccessFile` class and `new_table_reader_for_compaction_inputs` option will no longer be used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5431
Test Plan:
make check
Here is the benchmarking - https://gist.github.com/vjnadimpalli/083cf423f7b6aa12dcdb14c858bc18a5
Differential Revision: D15772533
Pulled By: vjnadimpalli
fbshipit-source-id: b71dca710590471ede6fb37553388654e2e479b9
Summary:
The patch brings the semantics of per-block-type read performance
context counters in sync with the generic block_read_count by only
incrementing the counter if the block was actually read from the file.
It also fixes index_block_read_count, which fell victim to the
refactoring in PR https://github.com/facebook/rocksdb/issues/5298.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5484
Test Plan: Extended the unit tests.
Differential Revision: D15887431
Pulled By: ltamasi
fbshipit-source-id: a3889759d0ac5759d56625d692cd828d1b9207a6
Summary:
This PR integrates the block cache tracer into block based table reader. The tracer will write the block cache accesses using the trace_writer. The tracer is null in this PR so that nothing will be logged.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5441
Differential Revision: D15772029
Pulled By: HaoyuHuang
fbshipit-source-id: a64adb92642cd23222e0ba8b10d86bf522b42f9b
Summary:
This PR integrates the block cache tracer class into db_impl.cc.
db_impl.cc contains a member variable of AtomicBlockCacheTraceWriter class and passes its reference to the block_based_table_reader.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5433
Differential Revision: D15728016
Pulled By: HaoyuHuang
fbshipit-source-id: 23d5659e8c82d556833dcc1a5558aac8c1f7db71
Summary:
BlockCacheLookupContext only contains the caller for now.
We will trace block accesses at five places:
1. BlockBasedTable::GetFilter.
2. BlockBasedTable::GetUncompressedDict.
3. BlockBasedTable::MaybeReadAndLoadToCache. (To trace access on data, index, and range deletion block.)
4. BlockBasedTable::Get. (To trace the referenced key and whether the referenced key exists in a fetched data block.)
5. BlockBasedTable::MultiGet. (To trace the referenced key and whether the referenced key exists in a fetched data block.)
We create the context at:
1. BlockBasedTable::Get. (kUserGet)
2. BlockBasedTable::MultiGet. (kUserMGet)
3. BlockBasedTable::NewIterator. (either kUserIterator, kCompaction, or external SST ingestion calls this function.)
4. BlockBasedTable::Open. (kPrefetch)
5. Index/Filter::CacheDependencies. (kPrefetch)
6. BlockBasedTable::ApproximateOffsetOf. (kCompaction or kUserApproximateSize).
I loaded 1 million key-value pairs into the database and ran the readrandom benchmark with a single thread. I gave the block cache 10 GB to make sure all reads hit the block cache after warmup. The throughput is comparable.
Throughput of this PR: 231334 ops/s.
Throughput of the master branch: 238428 ops/s.
Experiment setup:
RocksDB: version 6.2
Date: Mon Jun 10 10:42:51 2019
CPU: 24 * Intel Core Processor (Skylake)
CPUCache: 16384 KB
Keys: 20 bytes each
Values: 100 bytes each (100 bytes after compression)
Entries: 1000000
Prefix: 20 bytes
Keys per prefix: 0
RawSize: 114.4 MB (estimated)
FileSize: 114.4 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: NoCompression
Compression sampling rate: 0
Memtablerep: skip_list
Perf Level: 1
Load command: ./db_bench --benchmarks="fillseq" --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --statistics --cache_index_and_filter_blocks --cache_size=10737418240 --disable_auto_compactions=1 --disable_wal=1 --compression_type=none --min_level_to_compress=-1 --compression_ratio=1 --num=1000000
Run command: ./db_bench --benchmarks="readrandom,stats" --use_existing_db --threads=1 --duration=120 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --statistics --cache_index_and_filter_blocks --cache_size=10737418240 --disable_auto_compactions=1 --disable_wal=1 --compression_type=none --min_level_to_compress=-1 --compression_ratio=1 --num=1000000 --duration=120
TODOs:
1. Create a caller for external SST file ingestion and differentiate the callers for iterator.
2. Integrate tracer to trace block cache accesses.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5421
Differential Revision: D15704258
Pulled By: HaoyuHuang
fbshipit-source-id: 4aa8a55f8cb1576ffb367bfa3186a91d8f06d93a
Summary:
The patch cleans up the handling of cache hit/miss/insertion related
performance counters, get context counters, and statistics by
eliminating some code duplication and factoring out the affected logic
into separate methods. In addition, it makes the semantics of cache hit
metrics more consistent by changing the code so that accessing a
partition of partitioned indexes/filters through a pinned reference no
longer counts as a cache hit.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5408
Differential Revision: D15610883
Pulled By: ltamasi
fbshipit-source-id: ee749c18965077aca971d8f8bee8b24ed8fa76f1
Summary:
The commit makes GetEntryFromCache become a member function. It also makes all its callers become member functions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5394
Differential Revision: D15579222
Pulled By: HaoyuHuang
fbshipit-source-id: 07509c42ee9022dcded54950012bd3bd562aa1ae
Summary:
Many methods are passing around pointers to non-const objects when in fact
they do not/should not modify said objects. The patch makes the semantics
clearer and also helps from a thread safety point-of-view by changing some
pointers to pointers-to-const and marking some instance methods as const.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5383
Differential Revision: D15562770
Pulled By: ltamasi
fbshipit-source-id: 89361dadbb8b25bbe54d17e8da28fee24a2419af
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
Summary:
Previously if iterator upper/lower bound presents, `DBIter` will check the bound for every key. This patch turns the check into per-file or per-data block check when applicable, by checking against either file largest/smallest key or block index key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5111
Differential Revision: D15330061
Pulled By: siying
fbshipit-source-id: 8a653fe3cd50d94d81eb2d13b087326c58ee2024
Summary:
CachableEntry is used in a variety of contexts: it may refer to a cached
object (i.e. an object in the block cache), an owned object, or an
unowned object; also, in some cases (most notably with iterators), the
responsibility of managing the pointed-to object gets handed off to
another object. Each of the above scenarios have different implications
for the lifecycle of the referenced object. For the most part, the patch
does not change the lifecycle of managed objects; however, it makes
these relationships explicit, and it also enables us to eliminate some
hacks and accident-prone code around releasing cache handles and
deleting/cleaning up objects. (The only places where the patch changes
how an objects are managed are the partitions of partitioned indexes and
filters.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5252
Differential Revision: D15101358
Pulled By: ltamasi
fbshipit-source-id: 9eb59e9ae5a7230e3345789762d0ba1f189485be
Summary:
When reseek happens in merging iterator, reseeking a child iterator can be avoided if:
(1) the iterator represents imutable data
(2) reseek() to a larger key than the current key
(3) the current key of the child iterator is larger than the seek key
because it is guaranteed that the result will fall into the same position.
This optimization will be useful for use cases where users keep seeking to keys nearby in ascending order.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5286
Differential Revision: D15283635
Pulled By: siying
fbshipit-source-id: 35f79ffd5ce3609146faa8cd55f2bfd733502f83
Summary:
Improve the iterators performance when the user explicitly sets the readahead size via `ReadOptions.readahead_size`.
1. Stop creating new table readers when the user explicitly sets readahead size.
2. Make use of an internal buffer based on `FilePrefetchBuffer` instead of using `ReadaheadRandomAccessFileReader`, to handle the user readahead requests (for both buffered and direct io cases).
3. Add `readahead_size` to db_bench.
**Benchmarks:**
https://gist.github.com/sagar0/53693edc320a18abeaeca94ca32f5737
For 1 MB readahead, Buffered IO performance improves by 28% and Direct IO performance improves by 50%.
For 512KB readahead, Buffered IO performance improves by 30% and Direct IO performance improves by 67%.
**Test Plan:**
Updated `DBIteratorTest.ReadAhead` test to make sure that:
- no new table readers are created for iterators on setting ReadOptions.readahead_size
- At least "readahead" number of bytes are actually getting read on each iterator read.
TODO later:
- Use similar logic for compactions as well.
- This ties in nicely with #4052 and paves the way for removing ReadaheadRandomAcessFile later.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5246
Differential Revision: D15107946
Pulled By: sagar0
fbshipit-source-id: 2c1149729ca7d779e4e8b7710ba6f4e8cbfd3bea
Summary:
In long scans, virtual function calls of Next(), Valid(), key() and value() are not trivial. By introducing NextAndGetResult(), Some of the Next(), Valid() and key() calls are consolidated into one virtual function call to reduce CPU.
Also did some inline tricks and add some "final" randomly in some functions. Even without the "final" annotation, most Next() calls are inlined with -O3, but sometimes with a final it is inlined by O2 too. It doesn't hurt to add those final annotations.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5197
Differential Revision: D14945977
Pulled By: siying
fbshipit-source-id: 7003969f9a5f1d5717f0bda503b91d19ba75ed88
Summary:
This is second attempt for #5101. Original commit message:
`BlockBasedTableIterator` avoid reading next block on `Next()` if it detects the iterator will be out of bound, by checking against index key. The optimization was added in #2239, and by the time it only check the bound per block. It seems later change make it a per-key check, which introduce unnecessary key comparisons.
This patch come with two fixes:
Fix 1: To optimize checking for bounds, we need comparing the bounds with index key as well. However BlockBasedTableIterator doesn't know whether its index iterator is internally using user keys or internal keys. The patch fixes that by extending InternalIterator with a user_key() function that is overridden by In IndexBlockIter.
Fix 2: In #5101 we return `IsOutOfBound()=true` when block index key is out of bound. But the index key can be larger than smallest key of the next file on the level. That file can be within upper bound and should not be filtered out.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5142
Differential Revision: D14907113
Pulled By: siying
fbshipit-source-id: ac95775c5b4e7b700f76ab43e39f45402c98fbfb
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
Summary:
This reverts commit f29dc1b906.
In BlockBasedTableIterator, index_iter_->key() is sometimes a user key, so it is wrong to call ExtractUserKey() against it. This is a bug introduced by #5101.
Temporarily revert the diff to keep the branch clean.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5132
Differential Revision: D14718584
Pulled By: siying
fbshipit-source-id: 0ac55dc9b5dbc18c7809092146bdf7eb9364b9ad
Summary:
`BlockBasedTableIterator` avoid reading next block on `Next()` if it detects the iterator will be out of bound, by checking against index key. The optimization was added in #2239, and by the time it only check the bound per block. It seems later change make it a per-key check, which introduce unnecessary key comparisons.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5101
Differential Revision: D14678707
Pulled By: siying
fbshipit-source-id: 2372446116753c7892ea4cec7b4b49ef87ba463e
Summary:
Following files were run through automatic formatter:
db/db_impl.cc
db/db_impl.h
db/db_impl_compaction_flush.cc
db/db_impl_debug.cc
db/db_impl_files.cc
db/db_impl_readonly.h
db/db_impl_write.cc
db/dbformat.cc
db/dbformat.h
table/block.cc
table/block.h
table/block_based_filter_block.cc
table/block_based_filter_block.h
table/block_based_filter_block_test.cc
table/block_based_table_builder.cc
table/block_based_table_reader.cc
table/block_based_table_reader.h
table/block_builder.cc
table/block_builder.h
table/block_fetcher.cc
table/block_prefix_index.cc
table/block_prefix_index.h
table/block_test.cc
table/format.cc
table/format.h
I could easily run all the files, but I don't want people to feel that
I'm doing it for lines of code changes :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5114
Differential Revision: D14633040
Pulled By: siying
fbshipit-source-id: 3f346cb53bf21e8c10704400da548dfce1e89a52
Summary:
Currently `perf_context.user_key_comparison_count` is bump only in `InternalKeyComparator`. For places user comparator is used directly the counter is not bump. Fixing the majority of it.
Index iterator and filter code also use user comparator directly and don't bump the counter. It is not fixed in this patch.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5098
Differential Revision: D14603753
Pulled By: siying
fbshipit-source-id: 1cd41035644ca9e49b97a51030a5d1e15f5f3cae
Summary:
The code convention we are following, Google C++ Style, discourage
alias in header files, especially public headers:
https://google.github.io/styleguide/cppguide.html#Aliases
Remove some of them. Might removed some from .cc files as well to be consistent.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5113
Differential Revision: D14633030
Pulled By: siying
fbshipit-source-id: b990edc919d5de60295992284f980195e501d424
Summary:
Since `SstFileReader` don't know largest seqno of a file, it will fail this check when it open a file with global seqno: ca89ac2ba9/table/block_based_table_reader.cc (L730)
Changes:
* Pass largest_seqno=kMaxSequenceNumber from `SstFileReader` and allow it to bypass the above check.
* `BlockBasedTable::VerifyChecksum` also double check if checksum will match when excluding global seqno (this is to make the new test in sst_table_reader_test pass).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5097
Differential Revision: D14607434
Pulled By: riversand963
fbshipit-source-id: 9008599227c5fccbf9b73fee46b3bf4a1523f023
Summary:
- If block cache disabled or not used for meta-blocks, `BlockBasedTableReader::Rep::uncompression_dict` owns the `UncompressionDict`. It is preloaded during `PrefetchIndexAndFilterBlocks`.
- If block cache is enabled and used for meta-blocks, block cache owns the `UncompressionDict`, which holds dictionary and digested dictionary when needed. It is never prefetched though there is a TODO for this in the code. The cache key is simply the compression dictionary block handle.
- New stats for compression dictionary accesses in block cache: "BLOCK_CACHE_COMPRESSION_DICT_*" and "compression_dict_block_read_count"
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4881
Differential Revision: D13663801
Pulled By: ajkr
fbshipit-source-id: bdcc54044e180855cdcc57639b493b0e016c9a3f
Summary:
Previously we were cleaning up range tombstone meta-block by calling `ReleaseCachedEntry`, which wouldn't work if `value != nullptr && cache_handle == nullptr`. This happened at least in the case with mmap reads and block cache both enabled. I noticed `NewDataBlockIterator` intends to handle all these cases, so migrated to that instead of `NewUnfragmentedRangeTombstoneIterator`.
Also changed the table-opening logic to fail on `ReadRangeDelBlock` failure, since that can cause data corruption. Added a test case to verify this behavior. Note the test case does not fail on `TryReopen` because failure to preload table handlers is not considered critical. However, it does fail on any read involving that file since it cannot return correct data.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4810
Differential Revision: D13534296
Pulled By: ajkr
fbshipit-source-id: 55dde1111717cea6ec4bf38418daab81ccef3599
Summary:
Refactored and simplified `BlockBasedTable::Open` to be similar to `BlockBasedTableBuilder::Finish` as both these functions complement each other. Also added `BlockBasedTableBuilder::WriteFooter` along the way.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4636
Differential Revision: D12933319
Pulled By: sagar0
fbshipit-source-id: 1ff1d02f6d80a63b5ba720a1fc75e71c7344137b
Summary:
Fix block based table reader not using memory_allocator when allocating index blocks and compression dictionary blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4678
Differential Revision: D13054594
Pulled By: yiwu-arbug
fbshipit-source-id: 379f25bcc665395662511c4f873f4b7b55104ce2
Summary:
Removed `one_time_use` flag, which removed the need for some
tests, and changed all `NewRangeTombstoneIterator` methods to return
`FragmentedRangeTombstoneIterators`.
These changes also led to removing `RangeDelAggregatorV2::AddUnfragmentedTombstones`
and one of the `MemTableListVersion::AddRangeTombstoneIterators` methods.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4692
Differential Revision: D13106570
Pulled By: abhimadan
fbshipit-source-id: cbab5432d7fc2d9cdfd8d9d40361a1bffaa8f845
Summary:
We carry compression type and "cachable" variables for every block in the block cache, while they take well-known values. 8-byte is wasted for each block (2-byte for useful information but it takes 8 bytes because of padding). With this change, these two variables are removed.
The cachable information is only useful in the process of reading the block. We use other information to infer from it. For compressed blocks, the compression type is a part of the block content itself so we can get it from there.
Some code is slightly refactored so that the cachable information can flow better.
Another change is to only use class BlockContents for compressed block, and narrow the class Block to only be used for uncompressed blocks, including blocks in compressed block cache. This can make the Block class less confusing. It also saves tens of bytes for each block in compressed block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4650
Differential Revision: D12969070
Pulled By: siying
fbshipit-source-id: 548b62724e9eb66993026429fd9c7c3acd1f95ed
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
Rename the interface, as it is mean to be a generic interface for memory allocation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4590
Differential Revision: D10866340
Pulled By: yiwu-arbug
fbshipit-source-id: 85cb753351a40cb856c046aeaa3f3b369eef3d16
Summary:
This allows tombstone fragmenting to only be performed when the table is opened, and cached for subsequent accesses.
On the same DB used in #4449, running `readrandom` results in the following:
```
readrandom : 0.983 micros/op 1017076 ops/sec; 78.3 MB/s (63103 of 100000 found)
```
Now that Get performance in the presence of range tombstones is reasonable, I also compared the performance between a DB with range tombstones, "expanded" range tombstones (several point tombstones that cover the same keys the equivalent range tombstone would cover, a common workaround for DeleteRange), and no range tombstones. The created DBs had 5 million keys each, and DeleteRange was called at regular intervals (depending on the total number of range tombstones being written) after 4.5 million Puts. The table below summarizes the results of a `readwhilewriting` benchmark (in order to provide somewhat more realistic results):
```
Tombstones? | avg micros/op | stddev micros/op | avg ops/s | stddev ops/s
----------------- | ------------- | ---------------- | ------------ | ------------
None | 0.6186 | 0.04637 | 1,625,252.90 | 124,679.41
500 Expanded | 0.6019 | 0.03628 | 1,666,670.40 | 101,142.65
500 Unexpanded | 0.6435 | 0.03994 | 1,559,979.40 | 104,090.52
1k Expanded | 0.6034 | 0.04349 | 1,665,128.10 | 125,144.57
1k Unexpanded | 0.6261 | 0.03093 | 1,600,457.50 | 79,024.94
5k Expanded | 0.6163 | 0.05926 | 1,636,668.80 | 154,888.85
5k Unexpanded | 0.6402 | 0.04002 | 1,567,804.70 | 100,965.55
10k Expanded | 0.6036 | 0.05105 | 1,667,237.70 | 142,830.36
10k Unexpanded | 0.6128 | 0.02598 | 1,634,633.40 | 72,161.82
25k Expanded | 0.6198 | 0.04542 | 1,620,980.50 | 116,662.93
25k Unexpanded | 0.5478 | 0.0362 | 1,833,059.10 | 121,233.81
50k Expanded | 0.5104 | 0.04347 | 1,973,107.90 | 184,073.49
50k Unexpanded | 0.4528 | 0.03387 | 2,219,034.50 | 170,984.32
```
After a large enough quantity of range tombstones are written, range tombstone Gets can become faster than reading from an equivalent DB with several point tombstones.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4493
Differential Revision: D10842844
Pulled By: abhimadan
fbshipit-source-id: a7d44534f8120e6aabb65779d26c6b9df954c509
Summary:
PR https://github.com/facebook/rocksdb/pull/4226 introduced per-level perf context which allows breaking down perf context by levels.
This PR takes advantage of the feature to populate a few counters related to bloom filters
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4581
Differential Revision: D10518010
Pulled By: miasantreble
fbshipit-source-id: 011244561783ec860d32d5b0fa6bce6e78d70ef8
Summary:
This is a conceptually simple change, but it touches many files to
pass the allocator through function calls.
We introduce CacheAllocator, which can be used by clients to configure
custom allocator for cache blocks. Our motivation is to hook this up
with folly's `JemallocNodumpAllocator`
(f43ce6d686/folly/experimental/JemallocNodumpAllocator.h),
but there are many other possible use cases.
Additionally, this commit cleans up memory allocation in
`util/compression.h`, making sure that all allocations are wrapped in a
unique_ptr as soon as possible.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4437
Differential Revision: D10132814
Pulled By: yiwu-arbug
fbshipit-source-id: be1343a4b69f6048df127939fea9bbc96969f564
Summary:
Given that index value is a BlockHandle, which is basically an <offset, size> pair we can apply delta encoding on the values. The first value at each index restart interval encoded the full BlockHandle but the rest encode only the size. Refer to IndexBlockIter::DecodeCurrentValue for the detail of the encoding. This reduces the index size which helps using the block cache more efficiently. The feature is enabled with using format_version 4.
The feature comes with a bit of cpu overhead which should be paid back by the higher cache hits due to smaller index block size.
Results with sysbench read-only using 4k blocks and using 16 index restart interval:
Format 2:
19585 rocksdb read-only range=100
Format 3:
19569 rocksdb read-only range=100
Format 4:
19352 rocksdb read-only range=100
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3983
Differential Revision: D8361343
Pulled By: maysamyabandeh
fbshipit-source-id: f882ee082322acac32b0072e2bdbb0b5f854e651
Summary:
RocksDB used to store global_seqno in external SST files written by
SstFileWriter. During file ingestion, RocksDB uses `pwrite` to update the
`global_seqno`. Since random write is not supported in some non-POSIX compliant
file systems, external SST file ingestion is not supported on these file
systems. To address this limitation, we no longer update `global_seqno` during
file ingestion. Later RocksDB uses the MANIFEST and other information in table
properties to deduce global seqno for externally-ingested SST files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4172
Differential Revision: D8961465
Pulled By: riversand963
fbshipit-source-id: 4382ec85270a96be5bc0cf33758ca2b167b05071
Summary:
Right now we use one hard-coded prefetch size to prefetch data from the tail of the SST files. However, this may introduce a waste for some use cases, while not efficient for others.
Introduce a way to adjust this prefetch size by tracking 32 recent times, and pick a value with which the wasted read is less than 10%
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4156
Differential Revision: D8916847
Pulled By: siying
fbshipit-source-id: 8413f9eb3987e0033ed0bd910f83fc2eeaaf5758
Summary:
BlockIter is getting crowded including details that specific only to either index or data blocks. The patch moves down such details to DataBlockIter and IndexBlockIter, both inheriting from BlockIter.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4121
Differential Revision: D8816832
Pulled By: maysamyabandeh
fbshipit-source-id: d492e74155c11d8a0c1c85cd7ee33d24c7456197
Summary:
https://github.com/facebook/rocksdb/pull/3881 fixed a bug where PinnableSlice pin mmap files which could be deleted with background compaction. This is however a non-issue for ReadOnlyDB when there is no compaction running and max_open_files is -1. This patch reenables the pinning feature for that case.
Closes https://github.com/facebook/rocksdb/pull/4053
Differential Revision: D8662546
Pulled By: maysamyabandeh
fbshipit-source-id: 402962602eb0f644e17822748332999c3af029fd
Summary:
Previously in https://github.com/facebook/rocksdb/pull/3601 bloom filter will only be checked if `prefix_extractor` in the mutable_cf_options matches the one found in the SST file.
This PR relaxes the requirement by checking if all keys in the range [user_key, iterate_upper_bound) all share the same prefix after transforming using the BF in the SST file. If so, the bloom filter is considered compatible and will continue to be looked at.
Closes https://github.com/facebook/rocksdb/pull/3899
Differential Revision: D8157459
Pulled By: miasantreble
fbshipit-source-id: 18d17cba56a1005162f8d5db7a27aba277089c41
Summary:
Pass in `for_compaction` to `BlockBasedTableIterator` via `BlockBasedTableReader::NewIterator`.
In 7103559f49, `for_compaction` was set in `BlockBasedTable::Rep` via `BlockBasedTable::SetupForCompaction`. In hindsight it was not the right decision; it also caused TSAN to complain.
Closes https://github.com/facebook/rocksdb/pull/4048
Differential Revision: D8601056
Pulled By: sagar0
fbshipit-source-id: 30127e898c15c38c1080d57710b8c5a6d64a0ab3
Summary:
Top-level index in partitioned index/filter blocks are small and could be pinned in memory. So far we use that by cache_index_and_filter_blocks to false. This however make it difficult to keep account of the total memory usage. This patch introduces pin_top_level_index_and_filter which in combination with cache_index_and_filter_blocks=true keeps the top-level index in cache and yet pinned them to avoid cache misses and also cache lookup overhead.
Closes https://github.com/facebook/rocksdb/pull/4037
Differential Revision: D8596218
Pulled By: maysamyabandeh
fbshipit-source-id: 3a5f7f9ca6b4b525b03ff6bd82354881ae974ad2
Summary:
This PR extends the improvements in #3282 to also work when using Direct IO.
We see **4.5X performance improvement** in seekrandom benchmark doing long range scans, when using direct reads, on flash.
**Description:**
This change improves the performance of iterators doing long range scans (e.g. big/full index or table scans in MyRocks) by using readahead and prefetching additional data on each disk IO, and storing in a local buffer. This prefetching is automatically enabled on noticing more than 2 IOs for the same table file during iteration. The readahead size starts with 8KB and is exponentially increased on each additional sequential IO, up to a max of 256 KB. This helps in cutting down the number of IOs needed to complete the range scan.
**Implementation Details:**
- Used `FilePrefetchBuffer` as the underlying buffer to store the readahead data. `FilePrefetchBuffer` can now take file_reader, readahead_size and max_readahead_size as input to the constructor, and automatically do readahead.
- `FilePrefetchBuffer::TryReadFromCache` can now call `FilePrefetchBuffer::Prefetch` if readahead is enabled.
- `AlignedBuffer` (which is the underlying store for `FilePrefetchBuffer`) now takes a few additional args in `AlignedBuffer::AllocateNewBuffer` to allow copying data from the old buffer.
- Made sure not to re-read partial chunks of data that were already available in the buffer, from device again.
- Fixed a couple of cases where `AlignedBuffer::cursize_` was not being properly kept up-to-date.
**Constraints:**
- Similar to #3282, this gets currently enabled only when ReadOptions.readahead_size = 0 (which is the default value).
- Since the prefetched data is stored in a temporary buffer allocated on heap, this could increase the memory usage if you have many iterators doing long range scans simultaneously.
- Enabled only for user reads, and disabled for compactions. Compaction reads are controlled by the options `use_direct_io_for_flush_and_compaction` and `compaction_readahead_size`, and the current feature takes precautions not to mess with them.
**Benchmarks:**
I used the same benchmark as used in #3282.
Data fill:
```
TEST_TMPDIR=/data/users/$USER/benchmarks/iter ./db_bench -benchmarks=fillrandom -num=1000000000 -compression_type="none" -level_compaction_dynamic_level_bytes
```
Do a long range scan: Seekrandom with large number of nexts
```
TEST_TMPDIR=/data/users/$USER/benchmarks/iter ./db_bench -benchmarks=seekrandom -use_direct_reads -duration=60 -num=1000000000 -use_existing_db -seek_nexts=10000 -statistics -histogram
```
```
Before:
seekrandom : 37939.906 micros/op 26 ops/sec; 29.2 MB/s (1636 of 1999 found)
With this change:
seekrandom : 8527.720 micros/op 117 ops/sec; 129.7 MB/s (6530 of 7999 found)
```
~4.5X perf improvement. Taken on an average of 3 runs.
Closes https://github.com/facebook/rocksdb/pull/3884
Differential Revision: D8082143
Pulled By: sagar0
fbshipit-source-id: 4d7a8561cbac03478663713df4d31ad2620253bb
anand76