Summary:
Picked up a task to convert this to use the gtest framework. It can't be this simple, can it?
It works, but should all the std::cout be removed?
```
[$] ~/git/rocksdb [gft !]: ./merge_test
[==========] Running 2 tests from 1 test case.
[----------] Global test environment set-up.
[----------] 2 tests from MergeTest
[ RUN ] MergeTest.MergeDbTest
Test read-modify-write counters...
a: 3
1
2
a: 3
b: 1225
3
Compaction started ...
Compaction ended
a: 3
b: 1225
Test merge-based counters...
a: 3
1
2
a: 3
b: 1225
3
Test merge in memtable...
a: 3
1
2
a: 3
b: 1225
3
Test Partial-Merge
Test merge-operator not set after reopen
[ OK ] MergeTest.MergeDbTest (93 ms)
[ RUN ] MergeTest.MergeDbTtlTest
Opening database with TTL
Test read-modify-write counters...
a: 3
1
2
a: 3
b: 1225
3
Compaction started ...
Compaction ended
a: 3
b: 1225
Test merge-based counters...
a: 3
1
2
a: 3
b: 1225
3
Test merge in memtable...
Opening database with TTL
a: 3
1
2
a: 3
b: 1225
3
Test Partial-Merge
Opening database with TTL
Opening database with TTL
Opening database with TTL
Opening database with TTL
Test merge-operator not set after reopen
[ OK ] MergeTest.MergeDbTtlTest (97 ms)
[----------] 2 tests from MergeTest (190 ms total)
[----------] Global test environment tear-down
[==========] 2 tests from 1 test case ran. (190 ms total)
[ PASSED ] 2 tests.
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4114
Differential Revision: D8822886
Pulled By: gfosco
fbshipit-source-id: c299d008e883c3bb911d2b357a2e9e4423f8e91a
Summary:
The transactions are currently tested with and without using StackableDB. This is mostly to check that the code path is consistent with stackable db as well. Slow, stress tests however do not benefit from being run again with StackableDB. The patch excludes StackableDB from such tests.
On a single core it reduced the runtime of transaction_test from 199s to 135s.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4132
Differential Revision: D8841655
Pulled By: maysamyabandeh
fbshipit-source-id: 7b9aaba2673b542b195439dfb306cef26bd63b19
Summary:
This test routinely exceeds the FB contbuild test timeout of 10 minutes,
due to the large number of iterations. The large number (mainly due to
100 randomly selected window sizes) does not seem to add any value.
Reduce it to allow the test to finish in < 10 mins.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4117
Differential Revision: D8815646
Pulled By: anand1976
fbshipit-source-id: 260690d24f444767ad93b039dec3ae8b9cdd1843
Summary:
Prior to this PR, there was a race condition between `DBImpl::SetOptions` and `BackupEngine::CreateNewBackup`, as illustrated below.
```
Time thread 1 thread 2
| CreateNewBackup -> GetLiveFiles
| SetOptions -> RenameTempFileToOptionsFile
| SetOptions -> RenameTempFileToOptionsFile
| SetOptions -> RenameTempFileToOptionsFile // unlink oldest OPTIONS file
| copy the oldest OPTIONS // IO error!
V
```
Proposed fix is to check the value of `DBImpl::disable_obsolete_files_deletion_` before calling `DeleteObsoleteOptionsFiles`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4108
Differential Revision: D8796360
Pulled By: riversand963
fbshipit-source-id: 02045317f793ea4c7d4400a5bf333b8502fa3e82
Summary:
This adds support for recovering WriteUnprepared transactions through the following changes:
- The information in `RecoveredTransaction` is extended so that it can reference multiple batches.
- `MarkBeginPrepare` is extended with a bool indicating whether it is an unprepared begin, and this is passed down to `InsertRecoveredTransaction` to indicate whether the current transaction is prepared or not.
- `WriteUnpreparedTxnDB::Initialize` is overridden so that it will rollback unprepared transactions from the recovered transactions. This can be done without updating the prepare heap/commit map, because this is before the DB has finished initializing, and after writing the rollback batch, those data structures should not contain information about the rolled back transaction anyway.
Commit/Rollback of live transactions is still unimplemented and will come later.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4078
Differential Revision: D8703382
Pulled By: lth
fbshipit-source-id: 7e0aada6c23bd39299f1f20d6c060492e0e6b60a
Summary:
This adds a new WAL marker of type kTypeBeginUnprepareXID.
Also, DBImpl now contains a field called batch_per_txn (meaning one WriteBatch per transaction, or possibly multiple WriteBatches). This would also indicate that this DB is using WriteUnprepared policy.
Recovery code would be able to make use of this extra field on DBImpl in a separate diff. For now, it is just used to determine whether the WAL is compatible or not.
Closes https://github.com/facebook/rocksdb/pull/4069
Differential Revision: D8675099
Pulled By: lth
fbshipit-source-id: ca27cae1738e46d65f2bb92860fc759deb874749
Summary:
https://github.com/facebook/rocksdb/pull/3881 fixed a bug where PinnableSlice pin mmap files which could be deleted with background compaction. This is however a non-issue for ReadOnlyDB when there is no compaction running and max_open_files is -1. This patch reenables the pinning feature for that case.
Closes https://github.com/facebook/rocksdb/pull/4053
Differential Revision: D8662546
Pulled By: maysamyabandeh
fbshipit-source-id: 402962602eb0f644e17822748332999c3af029fd
Summary:
- Summary
Add timestamp into the DeadlockInfo to store the timestamp when deadlock detected on the rocksdb side.
- Testplan:
`make check -j64`
Closes https://github.com/facebook/rocksdb/pull/4060
Differential Revision: D8655380
Pulled By: chouxi
fbshipit-source-id: f58e1aa5e09eb1d1eed0a181d4e2304aaf01efe8
Summary:
This is implemented by extending ReadCallback with another function `MaxUnpreparedSequenceNumber` which returns the largest visible sequence number for the current transaction, if there is uncommitted data written to DB. Otherwise, it returns zero, indicating no uncommitted data.
There are the places where reads had to be modified.
- Get and Seek/Next was just updated to seek to max(snapshot_seq, MaxUnpreparedSequenceNumber()) instead, and iterate until a key was visible.
- Prev did not need need updates since it did not use the Seek to sequence number optimization. Assuming that locks were held when writing unprepared keys, and ValidateSnapshot runs, there should only be committed keys and unprepared keys of the current transaction, all of which are visible. Prev will simply iterate to get the last visible key.
- Reseeking to skip keys optimization was also disabled for write unprepared, since it's possible to hit the max_skip condition even while reseeking. There needs to be some way to resolve infinite looping in this case.
Closes https://github.com/facebook/rocksdb/pull/3955
Differential Revision: D8286688
Pulled By: lth
fbshipit-source-id: 25e42f47fdeb5f7accea0f4fd350ef35198caafe
Summary:
Previously with is_fifo=true we only evict TTL file. Changing it to also evict non-TTL files from oldest to newest, after exhausted TTL files.
Closes https://github.com/facebook/rocksdb/pull/4049
Differential Revision: D8604597
Pulled By: yiwu-arbug
fbshipit-source-id: bc4209ee27c1528ce4b72833e6f1e1bff80082c1
Summary:
Enable readahead for blob DB garbage collection, which should improve GC performance a little bit.
Closes https://github.com/facebook/rocksdb/pull/3648
Differential Revision: D7383791
Pulled By: yiwu-arbug
fbshipit-source-id: 642b3327f7105eca85986d3fb2d8f960a3d83cf1
Summary:
- Attempt to clean the checkpoint staging directory before starting a checkpoint. It was already cleaned up at the end of checkpoint. But it wasn't cleaned up in the edge case where the process crashed while staging checkpoint files.
- Attempt to clean the checkpoint directory before calling `Checkpoint::Create` in `db_stress`. This handles the case where checkpoint directory was created by a previous `db_stress` run but the process crashed before cleaning it up.
- Use `DestroyDB` for cleaning checkpoint directory since a checkpoint is a DB.
Closes https://github.com/facebook/rocksdb/pull/4035
Reviewed By: yiwu-arbug
Differential Revision: D8580223
Pulled By: ajkr
fbshipit-source-id: 28c667400e249fad0fdedc664b349031b7b61599
Summary:
We potentially need this information for tracing, profiling and diagnosis.
Closes https://github.com/facebook/rocksdb/pull/4026
Differential Revision: D8555214
Pulled By: riversand963
fbshipit-source-id: 4263e06c00b6d5410b46aa46eb4e358ff2161dd2
Summary:
PR https://github.com/facebook/rocksdb/pull/3838 made some changes that triggers lint warnings.
Run `make format` to fix formatting as suggested by siying .
Also piggyback two changes:
1) fix singleton destruction order for windows and posix env
2) fix two clang warnings
Closes https://github.com/facebook/rocksdb/pull/3954
Differential Revision: D8272041
Pulled By: miasantreble
fbshipit-source-id: 7c4fd12bd17aac13534520de0c733328aa3c6c9f
Summary:
Windows does not have LD_PRELOAD mechanism to override all memory allocation functions and ZSTD makes use of C-tuntime calloc. During flushes and compactions default system allocator fragments and the system slows down considerably.
For builds with jemalloc we employ an advanced ZSTD context creation API that re-directs memory allocation to jemalloc. To reduce the cost of context creation on each block we cache ZSTD context within the block based table builder while a new SST file is being built, this will help all platform builds including those w/o jemalloc. This avoids system allocator fragmentation and improves the performance.
The change does not address random reads and currently on Windows reads with ZSTD regress as compared with SNAPPY compression.
Closes https://github.com/facebook/rocksdb/pull/3838
Differential Revision: D8229794
Pulled By: miasantreble
fbshipit-source-id: 719b622ab7bf4109819bc44f45ec66f0dd3ee80d
Summary:
As titled.
I have not extended the Compatibility tests because the new WAL markers are still unimplemented.
Closes https://github.com/facebook/rocksdb/pull/3941
Differential Revision: D8238394
Pulled By: lth
fbshipit-source-id: 980e3d44837bbf2cfa64047f9738f559dfac4b1d
Summary:
In order to make valgrind check test to pass in a day, remove some tests that run prohibitively slow under valgrind.
Closes https://github.com/facebook/rocksdb/pull/3924
Differential Revision: D8210184
Pulled By: siying
fbshipit-source-id: 5b06fb08f3cf57571d422d05a0dbddc9f9376f7a
Summary:
Currently it is not possible to change bloom filter config without restart the db, which is causing a lot of operational complexity for users.
This PR aims to make it possible to dynamically change bloom filter config.
Closes https://github.com/facebook/rocksdb/pull/3601
Differential Revision: D7253114
Pulled By: miasantreble
fbshipit-source-id: f22595437d3e0b86c95918c484502de2ceca120c
Summary:
Before this PR, Iterator/InternalIterator may simultaneously have non-ok status() and Valid() = true. That state means that the last operation failed, but the iterator is nevertheless positioned on some unspecified record. Likely intended uses of that are:
* If some sst files are corrupted, a normal iterator can be used to read the data from files that are not corrupted.
* When using read_tier = kBlockCacheTier, read the data that's in block cache, skipping over the data that is not.
However, this behavior wasn't documented well (and until recently the wiki on github had misleading incorrect information). In the code there's a lot of confusion about the relationship between status() and Valid(), and about whether Seek()/SeekToLast()/etc reset the status or not. There were a number of bugs caused by this confusion, both inside rocksdb and in the code that uses rocksdb (including ours).
This PR changes the convention to:
* If status() is not ok, Valid() always returns false.
* Any seek operation resets status. (Before the PR, it depended on iterator type and on particular error.)
This does sacrifice the two use cases listed above, but siying said it's ok.
Overview of the changes:
* A commit that adds missing status checks in MergingIterator. This fixes a bug that actually affects us, and we need it fixed. `DBIteratorTest.NonBlockingIterationBugRepro` explains the scenario.
* Changes to lots of iterator types to make all of them conform to the new convention. Some bug fixes along the way. By far the biggest changes are in DBIter, which is a big messy piece of code; I tried to make it less big and messy but mostly failed.
* A stress-test for DBIter, to gain some confidence that I didn't break it. It does a few million random operations on the iterator, while occasionally modifying the underlying data (like ForwardIterator does) and occasionally returning non-ok status from internal iterator.
To find the iterator types that needed changes I searched for "public .*Iterator" in the code. Here's an overview of all 27 iterator types:
Iterators that didn't need changes:
* status() is always ok(), or Valid() is always false: MemTableIterator, ModelIter, TestIterator, KVIter (2 classes with this name anonymous namespaces), LoggingForwardVectorIterator, VectorIterator, MockTableIterator, EmptyIterator, EmptyInternalIterator.
* Thin wrappers that always pass through Valid() and status(): ArenaWrappedDBIter, TtlIterator, InternalIteratorFromIterator.
Iterators with changes (see inline comments for details):
* DBIter - an overhaul:
- It used to silently skip corrupted keys (`FindParseableKey()`), which seems dangerous. This PR makes it just stop immediately after encountering a corrupted key, just like it would for other kinds of corruption. Let me know if there was actually some deeper meaning in this behavior and I should put it back.
- It had a few code paths silently discarding subiterator's status. The stress test caught a few.
- The backwards iteration code path was expecting the internal iterator's set of keys to be immutable. It's probably always true in practice at the moment, since ForwardIterator doesn't support backwards iteration, but this PR fixes it anyway. See added DBIteratorTest.ReverseToForwardBug for an example.
- Some parts of backwards iteration code path even did things like `assert(iter_->Valid())` after a seek, which is never a safe assumption.
- It used to not reset status on seek for some types of errors.
- Some simplifications and better comments.
- Some things got more complicated from the added error handling. I'm open to ideas for how to make it nicer.
* MergingIterator - check status after every operation on every subiterator, and in some places assert that valid subiterators have ok status.
* ForwardIterator - changed to the new convention, also slightly simplified.
* ForwardLevelIterator - fixed some bugs and simplified.
* LevelIterator - simplified.
* TwoLevelIterator - changed to the new convention. Also fixed a bug that would make SeekForPrev() sometimes silently ignore errors from first_level_iter_.
* BlockBasedTableIterator - minor changes.
* BlockIter - replaced `SetStatus()` with `Invalidate()` to make sure non-ok BlockIter is always invalid.
* PlainTableIterator - some seeks used to not reset status.
* CuckooTableIterator - tiny code cleanup.
* ManagedIterator - fixed some bugs.
* BaseDeltaIterator - changed to the new convention and fixed a bug.
* BlobDBIterator - seeks used to not reset status.
* KeyConvertingIterator - some small change.
Closes https://github.com/facebook/rocksdb/pull/3810
Differential Revision: D7888019
Pulled By: al13n321
fbshipit-source-id: 4aaf6d3421c545d16722a815b2fa2e7912bc851d
Summary:
The patch clarifies the ownership of the root db after TransactionDB::Open. If it is a success the ownership if with the TransactionDB, and the root db will be deleted when the destructor of the base class, StackableDB, is called. If it is failure, the temporarily created root db will also be deleted properly.
The patch also includes lots of useful formatting changes.
Closes https://github.com/facebook/rocksdb/pull/3714 upon which this patch is built.
Closes https://github.com/facebook/rocksdb/pull/3806
Differential Revision: D7878010
Pulled By: maysamyabandeh
fbshipit-source-id: f54f3942e29434143ae5a2423ceec9c7072cd4c2
Summary:
This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction)
This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2.
Closes https://github.com/facebook/rocksdb/pull/3765
Differential Revision: D7747618
Pulled By: siying
fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
Summary:
Rollback was disabled in stress test since there was a concurrency issue in WritePrepared rollback algorithm. The issue is fixed by caching the column family handles in WritePrepared to skip getting them from the db when needed for rollback.
Tested by running transaction stress test under tsan.
Closes https://github.com/facebook/rocksdb/pull/3785
Differential Revision: D7793727
Pulled By: maysamyabandeh
fbshipit-source-id: d81ab6fda0e53186ca69944cfe0712ce4869451e
Summary:
The tsan flavor of SeqAdvanceConcurrentTest times out in our test infra. The patch splits it into 10 tests.
On my vm before:
[ OK ] WritePreparedTransactionTest/WritePreparedTransactionTest.SeqAdvanceConcurrentTest/0 (5194 ms)
after:
[ OK ] OneWriteQueue/SeqAdvanceConcurrentTest.SeqAdvanceConcurrentTest/0 (1906 ms)
Closes https://github.com/facebook/rocksdb/pull/3799
Differential Revision: D7854515
Pulled By: maysamyabandeh
fbshipit-source-id: 4fbac42a1f974326cbc237f8cb9d6232d379c431
Summary:
We used to name private directories like "1.tmp" while BackupEngine populated them, and then rename without the ".tmp" suffix (i.e., rename "1.tmp" to "1") after all files were copied. On glusterfs, directory renames like this require operations across many hosts, and partial failures have caused operational problems.
Fortunately we don't need to rename private directories. We already have a meta-file that uses the tempfile-rename pattern to commit a backup atomically after all its files have been successfully copied. So we can copy private files directly to their final location, so now there's no directory rename.
Closes https://github.com/facebook/rocksdb/pull/3749
Differential Revision: D7705610
Pulled By: ajkr
fbshipit-source-id: fd724a28dd2bf993ce323a5f2cb7e7d6980cc346
Summary:
Currently WritePrepared rolls back a transaction with prepare sequence number prepare_seq by i) write a single rollback batch with rollback_seq, ii) add <rollback_seq, rollback_seq> to commit cache, iii) remove prepare_seq from PrepareHeap.
This is correct assuming that there is no snapshot taken when a transaction is rolled back. This is the case the way MySQL does rollback which is after recovery. Otherwise if max_evicted_seq advances the prepare_seq, the live snapshot might assume data as committed since it does not find them in CommitCache.
The change is to simply add <prepare_seq. rollback_seq> to commit cache before removing prepare_seq from PrepareHeap. In this way if max_evicted_seq advances prpeare_seq, the existing mechanism that we have to check evicted entries against live snapshots will make sure that the live snapshot will not see the data of rolled back transaction.
Closes https://github.com/facebook/rocksdb/pull/3745
Differential Revision: D7696193
Pulled By: maysamyabandeh
fbshipit-source-id: c9a2d46341ddc03554dded1303520a1cab74ef9c
Summary:
The WriteBatch::Iterate will try with a larger sequence number if the memtable reports a duplicate. This status is specified with TryAgain status. So far the assumption was that the last entry in the batch will never return TryAgain, which is correct when WAL is created via WritePrepared since it always appends a batch separator if a natural one does not exist. However when reading a WAL generated by WriteCommitted this batch separator might not exist. Although WritePrepared is not supposed to be able to read the WAL generated by WriteCommitted we should avoid confusing scenarios in which the behavior becomes unpredictable. The path fixes that by allowing TryAgain even for the last entry of the write batch.
Closes https://github.com/facebook/rocksdb/pull/3747
Differential Revision: D7708391
Pulled By: maysamyabandeh
fbshipit-source-id: bfaddaa9b14a4cdaff6977f6f63c789a6ab1ee0d
Summary:
this PR fixes a few failed contbuild:
1. ASAN memory leak in Block::NewIterator (table/block.cc:429). the proper destruction of first_level_iter_ and second_level_iter_ of two_level_iterator.cc is missing from the code after the refactoring in https://github.com/facebook/rocksdb/pull/3406
2. various unused param errors introduced by https://github.com/facebook/rocksdb/pull/3662
3. updated comment for `ForceReleaseCachedEntry` to emphasize the use of `force_erase` flag.
Closes https://github.com/facebook/rocksdb/pull/3718
Reviewed By: maysamyabandeh
Differential Revision: D7621192
Pulled By: miasantreble
fbshipit-source-id: 476c94264083a0730ded957c29de7807e4f5b146
Summary:
This PR comments out the rest of the unused arguments which allow us to turn on the -Wunused-parameter flag. This is the second part of a codemod relating to https://github.com/facebook/rocksdb/pull/3557.
Closes https://github.com/facebook/rocksdb/pull/3662
Differential Revision: D7426121
Pulled By: Dayvedde
fbshipit-source-id: 223994923b42bd4953eb016a0129e47560f7e352
Summary:
This is a hack as temporary fix of MyRocks with rollbacking the merge operands. The way MyRocks uses merge operands is without protection of locks, which violates the assumption behind the rollback algorithm. They are ok with not being rolled back as it would just create a gap in the autoincrement column. The hack add an option to disable the rollback of merge operands by default and only enables it to let the unit test pass.
Closes https://github.com/facebook/rocksdb/pull/3711
Differential Revision: D7597177
Pulled By: maysamyabandeh
fbshipit-source-id: 544be0f666c7e7abb7f651ec8b23124e05056728
Summary:
We introduced smallest_prep optimization in this commit b225de7e10, which enables storing the smallest uncommitted sequence number along with the snapshot. This enables the readers that read from the snapshot to skip further checks and safely assumed the data is committed if its sequence number is less than smallest uncommitted when the snapshot was taken. The problem was that smallest uncommitted and the snapshot must be taken atomically, and the lack of atomicity had led to readers using a smallest uncommitted after the snapshot was taken and hence mistakenly skipping some data.
This patch fixes the problem by i) separating the process of removing of prepare entries from the AddCommitted function, ii) removing the prepare entires AFTER the committed sequence number is published, iii) getting smallest uncommitted (from the prepare list) BEFORE taking a snapshot. This guarantees that the smallest uncommitted that is accompanied with a snapshot is less than or equal of such number if it was obtained atomically.
Tested by running MySQLStyleTransactionTest/MySQLStyleTransactionTest.TransactionStressTest that was failing sporadically.
Closes https://github.com/facebook/rocksdb/pull/3703
Differential Revision: D7581934
Pulled By: maysamyabandeh
fbshipit-source-id: dc9d6f4fb477eba75d4d5927326905b548a96a32
Summary:
Adding some stats that would be helpful to monitor if the DB has gone to unlikely stats that would hurt the performance. These are mostly when we end up needing to acquire a mutex.
Closes https://github.com/facebook/rocksdb/pull/3683
Differential Revision: D7529393
Pulled By: maysamyabandeh
fbshipit-source-id: f7d36279a8f39bd84d8ddbf64b5c97f670c5d6d9
Summary:
When `max_valid_backups_to_open` is set, the `BackupEngine` doesn't know about the files referenced by existing backups. This PR prevents us from deleting valid files when that option is set, in cases where we are unable to accurately determine refcount. There are warnings logged when we may miss deleting unreferenced files, and a recommendation in the header for users to periodically unset this option and run a full `GarbageCollect`.
Closes https://github.com/facebook/rocksdb/pull/3518
Differential Revision: D7008331
Pulled By: ajkr
fbshipit-source-id: 87907f964dc9716e229d08636a895d2fc7b72305
Summary:
Make blob_dump tool able to show uncompressed values if the blob file is compressed. Also show total compressed vs. raw size at the end if --show_summary is provided.
Closes https://github.com/facebook/rocksdb/pull/3633
Differential Revision: D7348926
Pulled By: yiwu-arbug
fbshipit-source-id: ca709cb4ed5cf6a550ff2987df8033df81516f8e
Summary:
This change models Optimistic Tx db after Pessimistic TX db. The motivation for this change is to make the ptr polymorphic so it can be held by the same raw or smart ptr.
Currently, due to the inheritance of the Opt Tx db not being rooted in the manner of Pess Tx from a single DB root it is more difficult to write clean code and have clear ownership of the database in cases when options dictate instantiate of plan DB, Pess Tx DB or Opt tx db.
Closes https://github.com/facebook/rocksdb/pull/3566
Differential Revision: D7184502
Pulled By: yiwu-arbug
fbshipit-source-id: 31d06efafd79497bb0c230e971857dba3bd962c3
Summary:
The is an optimization to reduce lookup in the CommitCache when querying IsInSnapshot. The optimization takes the smallest uncommitted data at the time that the snapshot was taken and if the sequence number of the read data is lower than that number it assumes the data as committed.
To implement this optimization two changes are required: i) The AddPrepared function must be called sequentially to avoid out of order insertion in the PrepareHeap (otherwise the top of the heap does not indicate the smallest prepare in future too), ii) non-2PC transactions also call AddPrepared if they do not commit in one step.
Closes https://github.com/facebook/rocksdb/pull/3649
Differential Revision: D7388630
Pulled By: maysamyabandeh
fbshipit-source-id: b79506238c17467d590763582960d4d90181c600
Summary:
Currently if the CommitTimeWriteBatch is set to be used only as a state that is required only for recovery , the user cannot see that in DB until it is restarted. This while the state is already inserted into the DB after the memtable flush. It would be useful for debugging if make this state visible to the user after the flush by committing it. The patch does it by a invoking a callback that does the commit on the recoverable state.
Closes https://github.com/facebook/rocksdb/pull/3661
Differential Revision: D7424577
Pulled By: maysamyabandeh
fbshipit-source-id: 137f9408662f0853938b33fa440f27f04c1bbf5c
Summary:
Current commit cache size is 2^21. This was due to a type. With 2^23 commit entries we can have transactions as long as 64s without incurring the cost of having them evicted from the commit cache before their commit. Here is the math:
2^23 / 2 (one out of two seq numbers are for commit) / 2^16 TPS = 2^6 = 64s
Closes https://github.com/facebook/rocksdb/pull/3657
Differential Revision: D7411211
Pulled By: maysamyabandeh
fbshipit-source-id: e7cacf40579f3acf940643d8a1cfe5dd201caa35
Summary:
Currently log_writer->AddRecord in WriteImpl is protected from concurrent calls via FlushWAL only if two_write_queues_ option is set. The patch fixes the problem by i) skip log_writer->AddRecord in FlushWAL if manual_wal_flush is not set, ii) protects log_writer->AddRecord in WriteImpl via log_write_mutex_ if manual_wal_flush_ is set but two_write_queues_ is not.
Fixes#3599
Closes https://github.com/facebook/rocksdb/pull/3656
Differential Revision: D7405608
Pulled By: maysamyabandeh
fbshipit-source-id: d6cc265051c77ae49c7c6df4f427350baaf46934
Summary:
Currently AddPrepared is performed only on the first sub-batch if there are duplicate keys in the write batch. This could cause a problem if the transaction takes too long to commit and the seq number of the first sub-patch moved to old_prepared_ but not the seq of the later ones. The patch fixes this by calling AddPrepared for all sub-patches.
Closes https://github.com/facebook/rocksdb/pull/3651
Differential Revision: D7388635
Pulled By: maysamyabandeh
fbshipit-source-id: 0ccd80c150d9bc42fe955e49ddb9d7ca353067b4
Summary:
This commit fixes a race condition on calling SetLastPublishedSequence. The function must be called only from the 2nd write queue when two_write_queues is enabled. However there was a bug that would also call it from the main write queue if CommitTimeWriteBatch is provided to the commit request and yet use_only_the_last_commit_time_batch_for_recovery optimization is not enabled. To fix that we penalize the commit request in such cases by doing an additional write solely to publish the seq number from the 2nd queue.
Closes https://github.com/facebook/rocksdb/pull/3641
Differential Revision: D7361508
Pulled By: maysamyabandeh
fbshipit-source-id: bf8f7a27e5cccf5425dccbce25eb0032e8e5a4d7
Summary:
The 10MB buffer in BackupEngineImpl::BackupMeta::StoreToFile can be corrupted with a large number of files. Added a check to determine current buffer length and append data to file if buffer becomes full.
Resolves https://github.com/facebook/rocksdb/issues/3228
Closes https://github.com/facebook/rocksdb/pull/3636
Differential Revision: D7354160
Pulled By: ajkr
fbshipit-source-id: eec12d38095a0d17551a4aaee52b99d30a555722
Summary:
* Fix BlobDBImpl::GCFileAndUpdateLSM doesn't close the new file, and the new file will not be able to be garbage collected later.
* Fix BlobDBImpl::GCFileAndUpdateLSM doesn't copy over metadata from old file to new file.
Closes https://github.com/facebook/rocksdb/pull/3639
Differential Revision: D7355092
Pulled By: yiwu-arbug
fbshipit-source-id: 4fa3594ac5ce376bed1af04a545c532cfc0088c4
Summary:
`Writer::WriteBuffer` was always called at the beginning of checkpoint/backup. But that log writer has no internal synchronization, which meant the same buffer could be flushed twice in a race condition case, causing a WAL entry to be duplicated. Then subsequent WAL entries would be at unexpected offsets, causing the 32KB block boundaries to be overlapped and manifesting as a corruption.
This PR fixes the behavior to only use `WriteBuffer` (via `FlushWAL`) in checkpoint/backup when manual WAL flush is enabled. In that case, users are responsible for providing synchronization between WAL flushes. We can also consider removing the call entirely.
Closes https://github.com/facebook/rocksdb/pull/3603
Differential Revision: D7277447
Pulled By: ajkr
fbshipit-source-id: 1b15bd7fd930511222b075418c10de0aaa70a35a
Fosco Marotto