Summary:
Previously in https://github.com/facebook/rocksdb/pull/3601 bloom filter will only be checked if `prefix_extractor` in the mutable_cf_options matches the one found in the SST file.
This PR relaxes the requirement by checking if all keys in the range [user_key, iterate_upper_bound) all share the same prefix after transforming using the BF in the SST file. If so, the bloom filter is considered compatible and will continue to be looked at.
Closes https://github.com/facebook/rocksdb/pull/3899
Differential Revision: D8157459
Pulled By: miasantreble
fbshipit-source-id: 18d17cba56a1005162f8d5db7a27aba277089c41
Summary:
In `cf_options_type_info`, the deprecated options are all considered to have offset zero in the `MutableCFOptions` struct. Previously we weren't checking in `GetMutableOptionsFromStrings` whether the provided option was deprecated or not and simply writing the provided value to the offset specified by `cf_options_type_info`. That meant setting any deprecated option would overwrite the first element in the struct, which is `write_buffer_size`. `db_stress` hit this often since it calls `SetOptions` with `soft_rate_limit=0` and `hard_rate_limit=0`, which are both deprecated so cause `write_buffer_size` to be set to zero, which causes it to crash on the following assertion:
```
db_stress: db/memtable.cc:106: rocksdb::MemTable::MemTable(const rocksdb::InternalKeyComparator&, const rocksdb::ImmutableCFOptions&, const rocksdb::MutableCFOptions&, rocksdb::WriteBufferManager*, rocksdb::SequenceNumber, uint32_t): Assertion `!ShouldScheduleFlush()' failed.
```
We fix it by skipping deprecated options (and logging a warning) when users provide them to `SetOptions`. I didn't want to fail the call for compatibility reasons.
Closes https://github.com/facebook/rocksdb/pull/3700
Differential Revision: D7572596
Pulled By: ajkr
fbshipit-source-id: bd5d84e14c0c39f30c5d4c6df7c1503d2c28ecf1
Summary:
Let me know if more test coverage is needed
Closes https://github.com/facebook/rocksdb/pull/3213
Differential Revision: D6457165
Pulled By: miasantreble
fbshipit-source-id: 3f944abff28aa7775237f1c4f61c64ccbad4eea9
Summary:
Problem: Option string accepts only cache_size as parameter for block_cache which is specified as "block_cache=1M".
It doesn't accept other parameters like num_shards etc.
Changes :
1) ParseBlockBasedTableOption in block_based_table_factory is edited to accept cache options in the format "block_cache=<cache_size>:<num_shard_bits>:<strict_capacity_limit>:<high_pri_pool_ratio>".
Options other than cache_size are optional to maintain backward compatibility. The changes are valid for block_cache_compressed as well.
For example, "block_cache=1M:6:true:0.5", "block_cache=1M:6:true", "block_cache=1M:6" and "block_cache=1M" are all valid option strings.
2) Corresponding unit tests are added.
Closes https://github.com/facebook/rocksdb/pull/3108
Differential Revision: D6420997
Pulled By: sagar0
fbshipit-source-id: cdea8b785688d2802907974af27225ccc1c0cd43
Summary:
Static variables in header files will be instantiated in every file that includes the header file. This patch moves some of them from options_helper.h to its .cc files. It also moves the static variable out of the offset_of since the template function could also lead to multiple instantiation perhaps due to inlining.
Fixes https://github.com/facebook/rocksdb/issues/3176
Closes https://github.com/facebook/rocksdb/pull/3178
Differential Revision: D6363794
Pulled By: maysamyabandeh
fbshipit-source-id: d0a07f061b4d992ab4e0de2706e622131d258fdd
Summary:
The motivation for this PR is to add to RocksDB support for differential (incremental) snapshots, as snapshot of the DB changes between two points in time (one can think of it as diff between to sequence numbers, or the diff D which can be thought of as an SST file or just set of KVs that can be applied to sequence number S1 to get the database to the state at sequence number S2).
This feature would be useful for various distributed storages layers built on top of RocksDB, as it should help reduce resources (time and network bandwidth) needed to recover and rebuilt DB instances as replicas in the context of distributed storages.
From the API standpoint that would like client app requesting iterator between (start seqnum) and current DB state, and reading the "diff".
This is a very draft PR for initial review in the discussion on the approach, i'm going to rework some parts and keep updating the PR.
For now, what's done here according to initial discussions:
Preserving deletes:
- We want to be able to optionally preserve recent deletes for some defined period of time, so that if a delete came in recently and might need to be included in the next incremental snapshot it would't get dropped by a compaction. This is done by adding new param to Options (preserve deletes flag) and new variable to DB Impl where we keep track of the sequence number after which we don't want to drop tombstones, even if they are otherwise eligible for deletion.
- I also added a new API call for clients to be able to advance this cutoff seqnum after which we drop deletes; i assume it's more flexible to let clients control this, since otherwise we'd need to keep some kind of timestamp < -- > seqnum mapping inside the DB, which sounds messy and painful to support. Clients could make use of it by periodically calling GetLatestSequenceNumber(), noting the timestamp, doing some calculation and figuring out by how much we need to advance the cutoff seqnum.
- Compaction codepath in compaction_iterator.cc has been modified to avoid dropping tombstones with seqnum > cutoff seqnum.
Iterator changes:
- couple params added to ReadOptions, to optionally allow client to request internal keys instead of user keys (so that client can get the latest value of a key, be it delete marker or a put), as well as min timestamp and min seqnum.
TableCache changes:
- I modified table_cache code to be able to quickly exclude SST files from iterators heep if creation_time on the file is less then iter_start_ts as passed in ReadOptions. That would help a lot in some DB settings (like reading very recent data only or using FIFO compactions), but not so much for universal compaction with more or less long iterator time span.
What's left:
- Still looking at how to best plug that inside DBIter codepath. So far it seems that FindNextUserKeyInternal only parses values as UserKeys, and iter->key() call generally returns user key. Can we add new API to DBIter as internal_key(), and modify this internal method to optionally set saved_key_ to point to the full internal key? I don't need to store actual seqnum there, but I do need to store type.
Closes https://github.com/facebook/rocksdb/pull/2999
Differential Revision: D6175602
Pulled By: mikhail-antonov
fbshipit-source-id: c779a6696ee2d574d86c69cec866a3ae095aa900
Summary:
ColumnFamilyOptions::compaction_options_fifo and all its sub-fields can be set dynamically now.
Some of the ways in which the fifo compaction options can be set are:
- `SetOptions({{"compaction_options_fifo", "{max_table_files_size=1024}"}})`
- `SetOptions({{"compaction_options_fifo", "{ttl=600;}"}})`
- `SetOptions({{"compaction_options_fifo", "{max_table_files_size=1024;ttl=600;}"}})`
- `SetOptions({{"compaction_options_fifo", "{max_table_files_size=51;ttl=49;allow_compaction=true;}"}})`
Most of the code has been made generic enough so that it could be reused later to make universal options (and other such nested defined-types) dynamic with very few lines of parsing/serializing code changes.
Introduced a few new functions like `ParseStruct`, `SerializeStruct` and `GetStringFromStruct`.
The duplicate code in `GetStringFromDBOptions` and `GetStringFromColumnFamilyOptions` has been moved into `GetStringFromStruct`. So they become just simple wrappers now.
Closes https://github.com/facebook/rocksdb/pull/3006
Differential Revision: D6058619
Pulled By: sagar0
fbshipit-source-id: 1e8f78b3374ca5249bb4f3be8a6d3bb4cbc52f92
Summary:
* make `checksum_type_string_map` available for lite
* comment out `FilesPerLevel` in lite mode.
* travis and legocastle lite build also build `all` target and run tests
Closes https://github.com/facebook/rocksdb/pull/3015
Differential Revision: D6069822
Pulled By: yiwu-arbug
fbshipit-source-id: 9fe92ac220e711e9e6ed4e921bd25ef4314796a0
Summary:
Currently, RocksDB does not allow reopening a preexisting DB with no merge operator defined, with a merge operator defined. This means that if a DB ever want to add a merge operator, there's no way to do so currently.
Fix this by adding a new verification type `kByNameAllowFromNull` which will allow old values to be nullptr, and new values to be non-nullptr.
Closes https://github.com/facebook/rocksdb/pull/2958
Differential Revision: D5961131
Pulled By: lth
fbshipit-source-id: 06179bebd0d90db3d43690b5eb7345e2d5bab1eb
Summary:
SUMMARY
Moves the bytes_per_sync and wal_bytes_per_sync options from immutableoptions to mutable options. Also if wal_bytes_per_sync is changed, the wal file and memtables are flushed.
TEST PLAN
ran make check
all passed
Two new tests SetBytesPerSync, SetWalBytesPerSync check that after issuing setoptions with a new value for the var, the db options have the new value.
Closes https://github.com/facebook/rocksdb/pull/2893
Reviewed By: yiwu-arbug
Differential Revision: D5845814
Pulled By: TheRushingWookie
fbshipit-source-id: 93b52d779ce623691b546679dcd984a06d2ad1bd
Summary:
By default the seq number in DB is increased once per written key. WritePrepared txns requires the seq to be increased once per the entire batch so that the seq would be used as the prepare timestamp by which the transaction is identified. Also we need to increase seq for the commit marker since it would give a unique id to the commit timestamp of transactions.
Two unit tests are added to verify our understanding of how the seq should be increased. The recovery path requires much more work and is left to another patch.
Closes https://github.com/facebook/rocksdb/pull/2885
Differential Revision: D5837843
Pulled By: maysamyabandeh
fbshipit-source-id: a08960b93d727e1cf438c254d0c2636fb133cc1c
Summary:
test the `DBOptions(const Options&)` and `ColumnFamilyOptions(const Options&)` constructors. Actually this'll work better once we refactor `RandomInitDBOptions` / `RandomInitCFOptions` to use the authoritative sources of struct members: `db_options_type_info` / `cf_options_type_info` (internal task T21804189 for this).
Closes https://github.com/facebook/rocksdb/pull/2873
Differential Revision: D5817141
Pulled By: ajkr
fbshipit-source-id: 8567c20feced9d1751fdf1f4383e2af30f7e3591
Summary:
Replace dynamic_cast<> so that users can choose to build with RTTI off, so that they can save several bytes per object, and get tiny more memory available.
Some nontrivial changes:
1. Add Comparator::GetRootComparator() to get around the internal comparator hack
2. Add the two experiemental functions to DB
3. Add TableFactory::GetOptionString() to avoid unnecessary casting to get the option string
4. Since 3 is done, move the parsing option functions for table factory to table factory files too, to be symmetric.
Closes https://github.com/facebook/rocksdb/pull/2645
Differential Revision: D5502723
Pulled By: siying
fbshipit-source-id: fd13cec5601cf68a554d87bfcf056f2ffa5fbf7c
Summary:
Throughput: 46k tps in our sysbench settings (filling the details later)
The idea is to have the simplest change that gives us a reasonable boost
in 2PC throughput.
Major design changes:
1. The WAL file internal buffer is not flushed after each write. Instead
it is flushed before critical operations (WAL copy via fs) or when
FlushWAL is called by MySQL. Flushing the WAL buffer is also protected
via mutex_.
2. Use two sequence numbers: last seq, and last seq for write. Last seq
is the last visible sequence number for reads. Last seq for write is the
next sequence number that should be used to write to WAL/memtable. This
allows to have a memtable write be in parallel to WAL writes.
3. BatchGroup is not used for writes. This means that we can have
parallel writers which changes a major assumption in the code base. To
accommodate for that i) allow only 1 WriteImpl that intends to write to
memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes
come via group commit phase which is serial anyway, ii) make all the
parts in the code base that assumed to be the only writer (via
EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are
protected via a stat_mutex_.
Note: the first commit has the approach figured out but is not clean.
Submitting the PR anyway to get the early feedback on the approach. If
we are ok with the approach I will go ahead with this updates:
0) Rebase with Yi's pipelining changes
1) Currently batching is disabled by default to make sure that it will be
consistent with all unit tests. Will make this optional via a config.
2) A couple of unit tests are disabled. They need to be updated with the
serial commit of 2PC taken into account.
3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires
releasing mutex_ beforehand (the same way EnterUnbatched does). This
needs to be cleaned up.
Closes https://github.com/facebook/rocksdb/pull/2345
Differential Revision: D5210732
Pulled By: maysamyabandeh
fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
Summary:
Added a flag, `ignore_unknown_options`, to skip unknown options when loading an options file (using `LoadLatestOptions`/`LoadOptionsFromFile`) or while verifying options (using `CheckOptionsCompatibility`). This will help in downgrading the db to an older version.
Also added `--ignore_unknown_options` flag to ldb
**Example Use case:**
In MyRocks, if copying from newer version to older version, it is often impossible to start because of new RocksDB options that don't exist in older version, even though data format is compatible.
MyRocks uses these load and verify functions in [ha_rocksdb.cc::check_rocksdb_options_compatibility](e004fd9f41/storage/rocksdb/ha_rocksdb.cc (L3348-L3401)).
**Test Plan:**
Updated the unit tests.
`make check`
ldb:
$ ./ldb --db=/tmp/test_db --create_if_missing put a1 b1
OK
Now edit /tmp/test_db/<OPTIONS-file> and add an unknown option.
Try loading the options now, and it fails:
$ ./ldb --db=/tmp/test_db --try_load_options get a1
Failed: Invalid argument: Unrecognized option DBOptions:: abcd
Passes with the new --ignore_unknown_options flag
$ ./ldb --db=/tmp/test_db --try_load_options --ignore_unknown_options get a1
b1
Closes https://github.com/facebook/rocksdb/pull/2423
Differential Revision: D5212091
Pulled By: sagar0
fbshipit-source-id: 2ec17636feb47dc0351b53a77e5f15ef7cbf2ca7
Summary:
Improve write buffer manager in several ways:
1. Size is tracked when arena block is allocated, rather than every allocation, so that it can better track actual memory usage and the tracking overhead is slightly lower.
2. We start to trigger memtable flush when 7/8 of the memory cap hits, instead of 100%, and make 100% much harder to hit.
3. Allow a cache object to be passed into buffer manager and the size allocated by memtable can be costed there. This can help users have one single memory cap across block cache and memtable.
Closes https://github.com/facebook/rocksdb/pull/2350
Differential Revision: D5110648
Pulled By: siying
fbshipit-source-id: b4238113094bf22574001e446b5d88523ba00017
Summary:
- `max_background_flushes` and `max_background_compactions` are still supported for backwards compatibility
- `base_background_compactions` is completely deprecated. Now we just throttle to one background compaction when there's no pressure.
- `max_background_jobs` is added to automatically partition the concurrent background jobs into flushes vs compactions. Currently it's very simple as we just allocate one-fourth of the jobs to flushes, and the remaining can be used for compactions.
- The test cases that set `base_background_compactions > 1` needed to be updated. I just grab the pressure token such that the desired number of compactions can be scheduled.
Closes https://github.com/facebook/rocksdb/pull/2205
Differential Revision: D4937461
Pulled By: ajkr
fbshipit-source-id: df52cbbd497e13bbc9a60560a5ac2a2526b3f1f9
Summary:
PipelineWriteImpl is an alternative approach to WriteImpl. In WriteImpl, only one thread is allow to write at the same time. This thread will do both WAL and memtable writes for all write threads in the write group. Pending writers wait in queue until the current writer finishes. In the pipeline write approach, two queue is maintained: one WAL writer queue and one memtable writer queue. All writers (regardless of whether they need to write WAL) will still need to first join the WAL writer queue, and after the house keeping work and WAL writing, they will need to join memtable writer queue if needed. The benefit of this approach is that
1. Writers without memtable writes (e.g. the prepare phase of two phase commit) can exit write thread once WAL write is finish. They don't need to wait for memtable writes in case of group commit.
2. Pending writers only need to wait for previous WAL writer finish to be able to join the write thread, instead of wait also for previous memtable writes.
Merging #2056 and #2058 into this PR.
Closes https://github.com/facebook/rocksdb/pull/2286
Differential Revision: D5054606
Pulled By: yiwu-arbug
fbshipit-source-id: ee5b11efd19d3e39d6b7210937b11cefdd4d1c8d
Summary:
First cut for early review; there are few conceptual points to answer and some code structure issues.
For conceptual points -
- restriction-wise, we're going to disallow ingest_behind if (use_seqno_zero_out=true || disable_auto_compaction=false), the user is responsible to properly open and close DB with required params
- we wanted to ingest into reserved bottom most level. Should we fail fast if bottom level isn't empty, or should we attempt to ingest if file fits there key-ranges-wise?
- Modifying AssignLevelForIngestedFile seems the place we we'd handle that.
On code structure - going to refactor GenerateAndAddExternalFile call in the test class to allow passing instance of IngestionOptions, that's just going to incur lots of changes at callsites.
Closes https://github.com/facebook/rocksdb/pull/2144
Differential Revision: D4873732
Pulled By: lightmark
fbshipit-source-id: 81cb698106b68ef8797f564453651d50900e153a
Summary:
Makes max_open_files db option dynamically set-able by SetDBOptions. During the call of SetDBOptions we call SetCapacity on the table cache, which is a LRUCache.
Closes https://github.com/facebook/rocksdb/pull/2185
Differential Revision: D4979189
Pulled By: yiwu-arbug
fbshipit-source-id: ca7e8dc5e3619c79434f579be4847c0f7e56afda
Summary:
index_per_partition should have deprecated deprecated instead of being removed. It is causing backward compatibility issues.
Closes https://github.com/facebook/rocksdb/pull/2173
Differential Revision: D4910947
Pulled By: maysamyabandeh
fbshipit-source-id: 5c52939381847d232ede6866606f67f2b4b857ae
Summary:
Replace Options::use_direct_writes with Options::use_direct_io_for_flush_and_compaction
Now if Options::use_direct_io_for_flush_and_compaction = true, we will enable direct io for both reads and writes for flush and compaction job. Whereas Options::use_direct_reads controls user reads like iterator and Get().
Closes https://github.com/facebook/rocksdb/pull/2117
Differential Revision: D4860912
Pulled By: lightmark
fbshipit-source-id: d93575a8a5e780cf7e40797287edc425ee648c19
Summary:
This is an effort to club all string related utility functions into one common place, in string_util, so that it is easier for everyone to know what string processing functions are available. Right now they seem to be spread out across multiple modules, like logging and options_helper.
Check the sub-commits for easier reviewing.
Closes https://github.com/facebook/rocksdb/pull/2094
Differential Revision: D4837730
Pulled By: sagar0
fbshipit-source-id: 344278a
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
Summary:
Allow the users to specify the target index partition size.
With this patch an index partition is cut before its estimated in-memory size goes above the configured value for metadata_block_size. The filter partitions are still cut right after an index partition is cut.
Closes https://github.com/facebook/rocksdb/pull/2041
Differential Revision: D4780216
Pulled By: maysamyabandeh
fbshipit-source-id: 95a0831
Summary:
This is the second split of this pull request: https://github.com/facebook/rocksdb/pull/1891 which includes only the builder part. The testing will be included in the third split, where the reader is also included.
Closes https://github.com/facebook/rocksdb/pull/1952
Differential Revision: D4660272
Pulled By: maysamyabandeh
fbshipit-source-id: 36b3cf0
Summary:
This option is needed to be enabled for Direct IO
and I cannot think of a reason where we need to disable it
remove it and default it to true
Closes https://github.com/facebook/rocksdb/pull/1944
Differential Revision: D4641088
Pulled By: IslamAbdelRahman
fbshipit-source-id: d7085b9
Summary:
For the sake of making our options simpler, we should keep options.h as simple as possible and move more advanced/less common options to advaned_options.h
I started with ColumnFamilyOptions and also did some re-ordering
I have moved all ColumnFamilyOptions to advanced_options.h and only left these options in options.h
```
const Comparator* comparator = BytewiseComparator();
std::shared_ptr<MergeOperator> merge_operator = nullptr;
const CompactionFilter* compaction_filter = nullptr;
std::shared_ptr<CompactionFilterFactory> compaction_filter_factory = nullptr;
size_t write_buffer_size = 64 << 20;
CompressionType compression;
int level0_file_num_compaction_trigger = 4;
bool disable_auto_compactions = false;
```
Please feel free to comment on specific options if you think they should be advanced or should not be
Closes https://github.com/facebook/rocksdb/pull/1847
Differential Revision: D4519996
Pulled By: IslamAbdelRahman
fbshipit-source-id: abebd9a
Summary:
…action
The two options, min_partial_merge_operands and verify_checksums_in_compaction, are not seldom used. Remove them to reduce the total number of options. Also remove them from Java and C interface.
Closes https://github.com/facebook/rocksdb/pull/1902
Differential Revision: D4601219
Pulled By: siying
fbshipit-source-id: aad4cb2
Summary:
Remove disableDataSync, and another similarly named disable_data_sync options.
This is being done to simplify options, and also because the performance gains of this feature can be achieved by other methods.
Closes https://github.com/facebook/rocksdb/pull/1859
Differential Revision: D4541292
Pulled By: sagar0
fbshipit-source-id: 5b3a6ca
Summary:
Partition Index blocks and use a Partition-index as a 2nd level index.
The two-level index can be used by setting
BlockBasedTableOptions::kTwoLevelIndexSearch as the index type and
configuring BlockBasedTableOptions::index_per_partition
t15539501
Closes https://github.com/facebook/rocksdb/pull/1814
Differential Revision: D4473535
Pulled By: maysamyabandeh
fbshipit-source-id: bffb87e
Summary:
Made delete_obsolete_files_period_micros option dynamic. It can be updating using DB::SetDBOptions().
Closes https://github.com/facebook/rocksdb/pull/1595
Differential Revision: D4246569
Pulled By: tonek
fbshipit-source-id: d23f560
Summary:
Currently our skip-list have an optimization to speedup sequential
inserts from a single stream, by remembering the last insert position.
We extend the idea to support sequential inserts from multiple streams,
and even tolerate small reordering wihtin each stream.
This PR is the interface part adding the following:
- Add `memtable_insert_prefix_extractor` to allow specifying prefix for each key.
- Add `InsertWithHint()` interface to memtable, to allow underlying
implementation to return a hint of insert position, which can be later
pass back to optimize inserts.
- Memtable will maintain a map from prefix to hints and pass the hint
via `InsertWithHint()` if `memtable_insert_prefix_extractor` is non-null.
Closes https://github.com/facebook/rocksdb/pull/1419
Differential Revision: D4079367
Pulled By: yiwu-arbug
fbshipit-source-id: 3555326
Zhongyi Xie